Basic Ex products / Zone 1, 21

Transcription

1 Basic Ex products

2 Basic Ex products / Zone 1, 21 Dear partners, Our products are intended for use in potentially explosive atmospheres of gases, vapors and dust in industries such as refineries, offshore installations, petrochemical industry, chemical industry, pharmaceutical industry, food processing. The production program includes Ex light fittings, Ex installation material and accessories, Ex control units, Ex signal devices, Ex terminals, Ex distribution cabinets up to 630 V and 500 A. In accordance with national regulative, all our products and systems for quality assurance are certified by an authorized certification notified body according to the ATEX Directive 2014/34/EU. TEPEx achieved the certificates for the Customs Union formed by the Republic of Armenia, the Republic of Belarus, the Republic of Kazakhstan, the Kyrgyz Republic and the Russian Federation. TR CU Certificate of Conformity (EAC Certificate) is a mandatory document required to be submitted to the customs body for importing to territory of the Customs Union. All existing national certificates of conformity of Russia (GOST R), Belarus (STB) and Kazakhstan (GOST K) became invalid after 15th march The production process is conducted according to high standards of ISO 9001 (Quality Assurance System) and ISO (Environmental Management System), ensuring high quality products with constant care for environment.

3 Our production TEP Ex manufactures its products using modern processes and qualified personnel. TEP Ex is committed to an extensive and on going R&D projects, this along with on going investment, will continue to deliver innovative and high performance products for installation within safety critical areas. make your work surroundings safer

4 Ex junction box RK 01/ Enclosures made of PA glass fiber reinforced polyamide Equipped with terminals 4mm 2 Enclosure: PA glass fiber reinforced polyamide, color - black Cover: PA glass fiber reinforced polyamide with integrated thermoplastic elastomer gasket, closes with four M5 stainless steel screws. MODEL CODE ENTRIES TERMINALS RK 01/514 4x plastic Exe cable gland M25 for cable 7-15mm 5x 4mm 2 Ex switch SKX 12/ Enclosure: polyester plastic reinforced with glass fiber, color - black Cover: with integrated thermoplastic elastomer gasket, closes with four M5 stainless steel screws. Enclosure made of glass-fibre reinforced polyester resin 2 pole OFF switch OFF-ON switch 2 pole / internal component SMS 03/1 MODEL CODE TYPE ENTRIES SKX 12/21 OFF-ON (0-I) switch 2 pole, 16A 1x plastic Exe cable gland M25 for cable 7-15mm

5 Ex bulkhead LED light fitting LED 20-1 Housing: aluminium powder painted casting Diffuser: borosilicate glass, silicone gasket -30 Robust light alloy enclosure MODEL CODE LED power / voltage Luminous flux [lm] LED W / 230V 2000 Ex emergency light fitting FLXE 118 LED 32-0 Allowing the user to mount in areas where the available space is restricted Estimated service life hours Housing: aluminium powder painted casting Diffuser: borosilicate glass tube; Gasket: silicon -40 The light fitting is supplied wall/sealing mounting set MODEL CODE Voltage Entries FLXE 118 LED V AC/DC 1x ADP24 + 1x M20 plug make your work surroundings safer Used for marking escape routes and exits in potentially explosive atmospheres. Self-test, monitoring and diagnostics reduce costly maintenance checks.

6 Ex fluorescent light fitting PSF T8 fluorescent lamps in parallel configuration Central locking Switch with safety lock; when opening the central lock, all poles of the voltage supply to the ballast are disconnected In case of a lamp fault, the electronic ballast disconnects the defective lamp from the power supply Housing: SMC polyester plastic reinforced with glass fiber Diffuser: PC polycarbonate plastic Gasket: silicone Central locking: can be opened/closed using a socket key SW8, hinged lamp cover The light fitting is normally supplied without light sources, socket key screw, two Ex e cable glands M25, two Ex e plugs M25 and with ceiling mounting set MODEL CODE POWER / luminous Lampholder PSF 236 2x 36W / 6700 lm G13 L1 [mm] L2 [mm] PSF

7 Emergency fluorescent light fitting PSF 218-E Housing: SMC polyester plastic reinforced with glass fiber Diffuser: PC polycarbonate plastic -30 Gasket: silicone Central locking: can be opened/closed using a socket key SW8, hinged lamp cover MODEL CODE POWER / luminous Bat.mod. luminous PSF 218-E 2x 18W / 2700 lm The light fitting is normally supplied without light sources, socket key screw, two Ex e cable glands M25, two Ex e plugs M25 and with ceiling mounting set 1,5h aut. 800lm 3h aut 550lm 1,5 or 3h autonomy Maintained / Non maintained operation Ni-Mh battery L1 [mm] L2 [mm] PSF 218-E make your work surroundings safer

8 Prilaz dr.f.tuđmana 6, ZABOK, CROATIA Tel: , Fax: Web: