SOUTH AFRICAN NATIONAL STANDARD
|
|
- Candice French
- 5 years ago
- Views:
Transcription
1 ISBN Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard is the identical implementation of EN 14509:2013, and is adopted with the permission of CEN, rue de Stassart 36, B-1050 Brussels. WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS
2 Edition 1 EN 14509:2013 Edition 2 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS/TC 1021, Expanded (cellular) plastics and thermal insulation, in accordance with the procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was published in July SABS
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN October 2013 ICS Supersedes EN 14509:2006 English Version Self-supporting double skin metal faced insulating panels - Factory made products - Specifications Panneaux sandwiches autoportants, isolants, double peau à parements métalliques - Produits manufacturés - Spécifications Selbstragende Sandwich-Elemente mit beidseitigen Metalldeckschichten - Werkmäßig hergestellte Produkte - Spezifikationen This European Standard was approved by CEN on 18 July CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14509:2013: E
4 EN 14509:2013 (E) Contents Page Foreword Scope Normative references Terms and definitions Symbols and abbreviations Requirements, properties and test methods Requirements for component materials General Metal facings Core materials Adhesives and bonding Properties of panels Mechanical resistance of the panel Thermal transmittance Durability and other long-term effects Fire characteristics Dimensional tolerances for sandwich panels Water permeability Air permeability Water vapour permeability Airborne sound insulation (R w (C;C tr )) Sound absorption (α w ) Dangerous substances Actions and safety level requirements Mechanical resistance to design loads Actions and combinations of actions Evaluation of conformity, testing, assessment and sampling methods General Initial type testing ITT Initial type evaluation Existing ITT test data Sampling for ITT and audit testing purposes Testing and compliance criteria ITT Shortened testing programme ITT (product change) Factory Production Control (FPC) General Results of FPC tests Equipment Raw materials and components Product testing and assessment FPC Conformity of Factory Production Control supplier purchases Characteristic values from families of tests Classification and designation Marking, labelling and packaging Marking and labelling Packaging, transport, storage and handling
5 EN 14509:2013 (E) Annex A (normative) Testing procedures for material properties A.1 Cross panel tensile test A.1.1 Principle A.1.2 Apparatus A.1.3 Test specimens A.1.4 Procedure A.1.5 Calculations and results A.1.6 Cross panel tensile modulus at elevated temperature A.2 Compressive strength and modulus of the core material A.2.1 Principle A.2.2 Apparatus A.2.3 Test specimens A.2.4 Procedure A.2.5 Calculations and results A.3 Shear test on the core material A.3.1 Principle A.3.2 Apparatus A.3.3 Test specimens A.3.4 Procedure A.3.5 Calculations and results short-term loading A.3.6 Test procedures, calculations and results long term loading A.4 Test to determine the shear properties of a complete panel A.4.1 Principle A.4.2 Apparatus A.4.3 Test specimens A.4.4 Procedure A.4.5 Calculations and results A.5 Test to determine the bending moment capacity of a simply supported panel A.5.1 Principle A.5.2 Apparatus A.5.3 Test specimens A.5.4 Procedure A.5.5 Calculations and results A.6 Determination of the creep coefficient (φ t ) A.6.1 Principle A.6.2 Apparatus A.6.3 Test specimens A.6.4 Procedure A.6.5 Calculations and results A.7 Interaction between bending moment and support force A.7.1 Principle A.7.2 Apparatus A.7.3 Test specimens A.7.4 Procedure A.7.5 Calculations and results A.8 Determination of apparent core density and mass of panel A.8.1 Determination of apparent core density A.8.2 Determination of mass of a panel A.9 Test for resistance to point loads and repeated loads A.9.1 Panels subject to point loads A.9.2 Panels subject to repeated loads A.10 Calculation method for the determination of the thermal transmittance of a panel (U)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This
More informationSANS 21-1:2009 Edition 1 EN 115-1:2008
ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34367-5 Edition 1 (incorporating EN amdt 1, EN corr. 1) EN 1492-1:2000 Edition 1 (incorporating amdt 1, corr. 1) SOUTH AFRICAN NATIONAL STANDARD Textile slings Safety Part 1: Flat woven
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33591-5 EN 12353:2013 SOUTH AFRICAN NATIONAL STANDARD Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal (including Legionella),
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23963-3 SANS 50353-1:2003 EN 353-1:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Guided type fall arresters including a rigid anchor line
More informationSýnishorn Specification for mortar for masonry - Part 2: Masonry mortar
ÍST EN 998-2:2016 Gildistaka 15.2.2017 ICS: 91.1 Kröfur til múrs til nota í múrvirki - Hluti 2: Múr til nota í múrvirki Specification for mortar for masonry - Part 2: Masonry mortar Staðfestur af Staðlaráði
More informationFounding - Magnetic particle testing
Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30561-1 Edition 2 and EN tech. corr. 1 EN 1423:2012 Edition 2 and tech. corr. 1 SOUTH AFRICAN NATIONAL STANDARD Road marking materials Drop on materials Glass beads, antiskid aggregates
More informationILNAS-EN ISO 23640:2015
In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen
More informationHEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code
IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800
More informationSýnishorn Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics
ÍST EN 14885:2015 Gildistaka 15.12.2015 ICS: 71.1 Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics Staðfestur af Staðlaráði Íslands
More informationSýnishorn Maintenance - Qualification of maintenance personnel
ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD
More informationOffice furniture - Office work chair - Part 2: Safety requirements
Irish Standard Office furniture - Office work chair - Part 2: Safety requirements NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 1335-2:2009 I.S. EN 1335-2:2000 EN
More informationDECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16819 October 2015 ICS 03.240 English Version Postal services - Parcel boxes for end use - Technical features Services postaux
More informationSýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015
ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun
More informationNATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS IRISH STANDARD I.S. EN 12057:2004. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 12057:2004 ICS 91.100.15 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie NATURAL STONE PRODUCTS -
More informationSýnishorn Windows and doors - Watertightness - Test method
ÍST EN 1027:2016 Gildistaka 25.9.2016 ICS: 91.06 Windows and doors - Watertightness - Test method Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD
More informationPaper and board - Determination of grammage (ISO 536:2012)
Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard
More informationLABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code
IRISH STANDARD I.S. EN ISO 4788:2005 ICS 17.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie LABORATORY GLASSWARE - GRADUATED
More informationILNAS-EN ISO :2005
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005) Matériaux métalliques - Essai de dureté Vickers - Partie 1: Méthode d'essai (ISO 6507-1:2005) Metallische Werkstoffe -
More informationIrish Standard I.S. EN :2009
Irish Standard NSAI 2009 No copying without NSAI permission except as permitted by copyright law. Incorporating amendments/corrigenda issued since publication: This document is based on: This document
More informationFurniture - Children's cots and folding cots for domestic use - Part 2: Test methods
Irish Standard Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods CEN 2013 No copying without NSAI permission except as permitted by copyright law. EN 716-2:2008/A1:2013
More informationCONFORMITY ASSESSMENT - SUPPLIER'S
STANDARD I.S. EN ISO/IEC 17050-2:2004 ICS 03.120.20 National Standards Authority of Ireland Dublin 9 Ireland CONFORMITY ASSESSMENT - SUPPLIER'S Tel: (01) 807 3800 Fax: (01) 807 3838 DECLARATION OF CONFORMITY
More informationSýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity
FprEN 1279-5 Umsagnarfrestur til 8.2.2018 ICS: 81.04 Gler í byggingar - Einangrunargler - Hluti 5: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity Staðfestur af
More informationSýnishorn General requirements for components used in drains and sewers
ÍST EN 476:2011 Gildistaka 1.6.2011 ICS: 93.03 General requirements for components used in drains and sewers Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN
More informationILNAS-EN ISO :2017
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich
More informationSýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
ÍST EN 14387:2004+A1:2008 Gildistaka 1.5.2008 ICS: 13.34 Öndunarfærahlífar - Gassíur og samsettar síur - Kröfur, prófun, merking Respiratory protective devices - Gas filter(s) and combined filter(s) -
More informationREFRIGERATING SYSTEMS AND HEAT
IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS
More informationILNAS-EN ISO 10684:2004
Fasteners - Hot dip galvanized coatings (ISO 10684:2004) Éléments de fixation - Revêtements de galvanisation à chaud (ISO 10684:2004) Verbindungselemente - Feuerverzinkung (ISO 10684:2004) 07/2004 National
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength Natural stone test methods - Determination of uniaxial compressive strength EESTI STANDARDIKESKUS
More informationELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code
IRISH STANDARD I.S. EN 62382:2007 ICS 25.040.01 ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800
More informationILNAS-EN 62560:2012/A1:2015
ILNAS-EN 62560:2012/A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications Lampes à LED autoballastées pour l'éclairage général fonctionnant à des tensions
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15102:2007 Dekoratiivsed seinakatted.tahvel- ja rullkatted Decorative wallcoverings - Roll and panel form EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev
More informationHot rolled flat products made of high yield strength steels for cold forming
ÖNORM EN 10149-2 Edition: 2013-11-01 Hot rolled flat products made of high yield strength steels for cold forming Part 2: Technical delivery conditions for thermomechanically rolled steels Warmgewalzte
More informationSýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts
ÍST EN 1366-1:2014 Gildistaka 1.2.2015 ICS: 13.22 Eldþolsprófanir fyrir þjónustustöðvar - Hluti 1: Loftræstistokkar Fire resistance test for service installations - Part 1: Ventilation ducts Staðfestur
More informationSýnishorn Safety of woodworking machines - One side thickness planing machines
EN 860:2007+A2:2012 Umsagnarfrestur til 15.4.2012 ICS: 79.12 Öryggi trésmíðavéla - Þykktarheflar til vinnslu á einni hlið Safety of woodworking machines - One side thickness planing machines Staðfestur
More informationCOMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN :
IRISH STANDARD I.S. EN 13757-2:2005 ICS 33.200 35.100.10 35.100.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: Tel:
More informationEnglish version. Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
INTERPRETATION SHEET FEUILLE D'INTERPRETATION INTERPRETATIONSBLATT February 2014 ICS 13.320 EN 50131-2-7-1/IS1 English version Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 3746:2007 Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD EESTI STANDARDIKESKUS
More informationBIOLOGICAL EVALUATION OF MEDICAL
IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 9554:2005 Fibre ropes - General specification Fibre ropes - General specification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationCLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005
IRISH STANDARD I.S. EN ISO 4630-1:2005 ICS 87.060.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: Tel:
More informationEurocode 9 Design of aluminium structures
BRITISH STANDARD Eurocode 9 Design of aluminium structures BS EN 1999-1-2:2007 Incorporating corrigenda December 2008, March 2009 and October 2009 Part 1-2: Structural fire design ICS 91.010.30; 91.080.10;
More informationPACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code
STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 13445-102 May 2015 ICS 23.020.30 English Version Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket
More informationÍST EN :2015. Gildistaka ICS: 53.06
ÍST EN 1459-3:2015 Gildistaka 15.11.2015 ICS: 53.06 Rough-terrain trucks - Safety requirements and verification - Part 3: Additional requirements for variable reach trucks fitted with elevating work platform
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15205:2007 Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis Determination of hexavalent chromium in corrosion protection layers - Qualitative
More informationCylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs
Irish Standard I.S. EN 13906-1:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs CEN 2013 No copying without NSAI permission except as
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12369-2:2004 Wood-based panels - Characteristic values for structural design - Part 2: Plywwood Wood-based panels - Characteristic values for structural design - Part 2: Plywwood
More informationSýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails
ÍST EN ISO 14122-3:2016 Gildistaka 20.11.2016 ICS: 13.11 Öryggi véla - Varanlegar aðgönguleiðir að vélum - Hluti 3: Stigar, klifurstigar og handrið Safety of machinery - Permanent means of access to machinesry
More informationSýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment
ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications
More informationSýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity
ÍST EN 1279-5:2005+A2:2010 Fellur úr gildi 15.11.2010 ICS: 81.04 Gler í byggingar - Einangrunargler - 5. hluti: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity
More informationPAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code
IRISH STANDARD I.S. EN ISO 2758:2003 ICS 85.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie PAPER - DETERMINATION OF
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14889-1:2006 Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the
More informationSýnishorn Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/product standard
ÍST EN 14449:2005 Gildistaka 30.11.2005 ICS: 81.04 Gler í byggingar - Lagskipt gler og lagskipt öryggisgler - Samræmismat/vörustaðall Glass in building - Laminated glass and laminated safety glass - Evaluation
More informationALARM SYSTEMS - INTRUSION AND
IRISH STANDARD I.S. EN 50131-1:2006 ICS 13.310 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS -- PART 1: SYSTEM Tel: +353 1 807 3800 Fax:
More informationMedical gloves for single use - Part 2: Requirements and testing for physical properties
Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.
More informationOVERHEAD ELECTRICAL LINES EXCEEDING
IRISH STANDARD I.S. EN 50423-1:2005 ICS 29.240.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV UP TO AND INCLUDING AC 45 KV Tel: +353
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15311:2007 Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions Thermal spraying - Components with thermally sprayed coatings - Technical supply
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1749 June 2014 ICS 91.140.40 Supersedes CEN/TR 1749:2009 English Version European scheme for the classification of gas appliances according
More informationSýnishorn Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
ÍST EN 13823:2010+A1:2014 Gildistaka 1.3.2015 ICS: 13.22 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item Staðfestur
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 7200:2004 Technical product documentation - Data fields in title blocks and document headers Technical product documentation - Data fields in title blocks and document headers
More informationHexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 1084:2004 Fasteners - Hot dip galvanized coatings Fasteners - Hot dip galvanized coatings EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14073-2:2004 Office furniture - Storage furniture - Part 2: Safety requirements Office furniture - Storage furniture - Part 2: Safety requirements EESTI STANDARDIKESKUS EESTI STANDARDI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 4170:2007 Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle Aerospace series - Paints and varnishes - Test method
More informationNATURAL GAS - CALCULATION OF
IRISH STANDARD I.S. EN ISO 12213-2:2005 ICS 75.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: Tel: +353 1 807 3800 Fax:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 3375-004:2007 Aerospace series - Cable, electrical, for digital data transmission - Part 004: Double braid - 77 Ohms - Type WJ - Product standard Aerospace series - Cable, electrical,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 225-1:2007 Atomizing oil burners - Oil burner pumps and oil burner motors- Connecting dimensions - Part 1: Oil burner pumps Atomizing oil burners - Oil burner pumps and oil burner
More informationSludge, treated biowaste and soil Digestion of nitric acid soluble fractions of elements
ÖNORM EN 16173 Edition: 2012-10-01 Sludge, treated biowaste and soil Digestion of nitric acid soluble fractions of elements Schlamm, behandelter Bioabfall und Boden Aufschluss von mit Salpetersäure löslichen
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10325:2006 Steel - Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Index] Steel - Determination of yield strength increase by the effect of
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1469:2005 Looduslikust kivist tooted. Välisvooderdusplaadid. Nõuded Natural stone products - Slabs for cladding - Requirements EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 6134:2005 Rubber hoses and hose assemblies for saturated steam - Specification Rubber hoses and hose assemblies for saturated steam - Specification EESTI STANDARDIKESKUS EESTI
More informationFire-fighting hoses - Non-percolating layflat hoses for fixed systems KONSOLIDEERITUD TEKST
EESTI STANDARD EVS-EN 14540:2004+A1:2007 Fire-fighting hoses - Non-percolating layflat hoses for fixed systems KONSOLIDEERITUD TEKST Fire-fighting hoses - Non-percolating layflat hoses for fixed systems
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14293:2006 Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum
More informationGlass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)
Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except
More informationSTEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005.
IRISH STANDARD I.S. EN 10298:2005 ICS 23.040.10 23.040.40 25.220.99 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 2486:2005 Aerospace series - Aluminium alloy AL- P2618A - Forging stock Aerospace series - Aluminium alloy AL-P2618A - Forging stock EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationSýnishorn Power installations exceeding 1 kv a.c. - Part 1: Common rules
ÍST EN 61936-1:2010 Gildistaka 25.2.2011 ICS: 29.02 Tók við af ÍST 170:2005, sjá einnig ÍST EN 50522:2010 Power installations exceeding 1 kv a.c. - Part 1: Common rules Staðfestur af Staðlaráði Íslands
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns Surfaces for sports areas - Determination of tensile strength of synthetic yarns EESTI
More informationILNAS-EN ISO 2692:2006
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische
More informationCamping tents (ISO 5912:2011)
Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based
More informationEnglish Version. Daylight of buildings
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM DRAFT pren 17037 July 2016 ICS 91.160.01 English Version Daylight of buildings L'éclairage naturel des bâtiments Tageslicht in Gebäuden This draft European
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16829 August 2016 ICS 13.220.40; 13.230; 53.040.10 English Version Fire and explosion prevention and protection for bucket elevators Prévention
More informationGas meters - Additional functionalities
Irish Standard Gas meters - Additional functionalities CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10328:2005 Iron and steel - Determination of the conventional depth of hardening after surface heating Iron and steel - Determination of the conventional depth of hardening after
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12125:2005 Chemicals used for treatment of water intended for human consumption - Sodium thiosulfate Chemicals used for treatment of water intended for human consumption - Sodium
More informationBitumen and bituminous binders - Specifications for paving grade bitumens
Irish Standard I.S. EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens NSAI 2009 No copying without NSAI permission except as permitted by copyright law. EN 12591:2009
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15216:2007 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates Characterization of waste - Determination of total dissolved solids (TDS)
More informationVägutrustning Vägmärken Variabla meddelandeskyltar Del 3: Produktionskontroll
SVENSK STANDARD SS-EN 12966-3:2005 Fastställd 2005-05-13 Utgåva 1 Vägutrustning Vägmärken Variabla meddelandeskyltar Del 3: Produktionskontroll Road vertical signs Variable message traffic signs Part 3:
More informationBitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation
Irish Standard I.S. EN 12606-1:2015 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation CEN 2015 No copying without NSAI permission except as permitted
More informationÍST EN :2013. Gildistaka ICS: 75.2
ÍST EN 14678-3:2013 Gildistaka 1.5.2013 ICS: 75.2 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at private
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14889-2:2006 Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14845-1:2007 Test methods for fibres in concrete - Part 1: Reference concretes Test methods for fibres in concrete - Part 1: Reference concretes EESTI STANDARDIKESKUS EESTI STANDARDI
More information