AND ARCHITECT SPECIFICATIONS
|
|
- Arleen Gwen Carr
- 5 years ago
- Views:
Transcription
1 CSM-4 Controllable Signal/Releasing Module ENGINEER AND ARCHITECT SPECIFICATIONS Supervised Alarm Notification Appliance Circuits Operates Audible or Visual Devices Class A (Style Z) or Class B (StyleY) Circuits 4 VDC.5 Amps Per Circuit City Tie or Lease Line Output Releasing Service Fully Programmable Coded Audibles On Board Microprocessor March Time/Uniform Code 3 Selectable Degrade Operation Silencable/Non-Silencable Option Automatic/Manual Control Circuits Power Limited Per NEC 760 Listed, ULC Listed CSFM, NYMEA, FM Approved NFPA 3, Pre-Action and Deluge NFPA 00, FM-00 Releasing NFPA A, Halon Releasing Description The Controllable Signal Module CSM-4 provides two fully supervised, programmable notification appliance circuits. The CSM-4 supplies two Class B (Style Y) or Class A (Style Z) type output circuits for the supervision and control of listed audible or visual notification appliances such as horns, bells, strobes, etc. Each circuit can provide up to.5 amps (4 VDC) of current to power indicating appliances. Any output on a CSM-4 may be configured as either a supervised connection to a local energy type Master City Box or a supervised connection to a Leased Line remote monitoring system. CSM-4 circuits may also be configured for pre-action or deluge releasing service per NFPA 3, extinguishing agent releasing (Halon, FM-00) per NFPA A and NFPA 00. Each circuit or output may be controlled automatically through the MXL program logic or manually using the MXL keypad. Automatic control may also be time based. Each circuit or output can be manually Armed or Disarmed through the MXL keypad. When any circuit or output has been Disarmed, the MXL LCD annunciator will indicate the affected circuit or output and the Partial System Disable LED will illuminate, until the circuit or output has been returned to the Armed condition. The CSM-4 contains an on-board microprocessor which allows notification circuit outputs to function in a degrade mode even if the main MXL processor or the local network communication link has failed. Each circuit s degrade mode of operation can be separately configured to respond to an alarm in the following manner: OFF, ON, CONTIN- UOSLY or SECOND ON - SECOND OFF. In a degrade mode a CSM-4 will respond to an alarm from any Intelligent/Analog (ALD) initiating device or Conventional Zone (CZM) connected to the same network node. CSM-4 notification appliance circuit outputs may be configured to provide a coded, march time, or uniform code 3 output. This equipment is approved for operation over the temperature range of 0 C to 49 C. CATALOG NUMBER 500
2 Engineer and Architect Specifications Notification Appliance Circuits shall be provided by a Cerberus Pyrotronics Model CSM-4 plug-in controllable signaling module. The unit shall provide two alarm notification application circuits which may be configured as either Class A (Style Z) or Class B (Style Y). Each circuit will be capable of activating up to.5 amps of listed audible or visual notification appliances. These circuits shall also be capable of being configured for activation of a local energy Master City connection or polarity reversal type Leased Line connection. Each circuit shall also be capable of being configured to activate a solenoid for pre-action or deluge releasing service per NFPA 3, as well as extinguishing agent releasing (Halon, FM-00) per NFPA A and NFPA 00. The notification appliance circuits shall be capable of a degrade mode of operation in the event of main processor failure or loss of network communication. All notification appliance circuits shall be capable of automatic activation or de-activation through control by event or time based programming contained in the control panel. They shall also be capable of manual activation or de-activation using the system keypad. Disarming any circuit or output shall result in the alphanumeric display indicating the circuit or output which has been disarmed as well as the illumination of the System Partial Disable LED. The CSM-4 shall be a plug-in type module using gold plated edge connectors to interface with the MOM- or MOM-4 expansion card cages. It shall occupy one half slot in the card cages. Notification circuit, City Tie and Leased Line power shall be provided to the CSM-4 through the main control power supply or through the supervised remote power supplies. Dimensional Data Wiring CSM-4 Installation Slots The municipal tie and leased line applications require the LLM- interface module. The notification appliances and leased line applications are power limited. ELECTRICAL CONNECTIONS FOR NOTIFYING APPLIANCES (NFPA 7 Local). All wiring must be in accordance with Article 760 or NEC or local building codes. 3. Both circuits are power limited to NFPA 70 per NEC Electrical Ratings: Supervisory: Alarm: 8 to 3 VDC, ma max 8 to 3 VDC,.5A max 5. End of line device: Use Cerberus Pyrotronics EOL device,.k, ½ watt, P/N Line Resistance: 3 ohms max CSM-4 Board CSM-4 Loop Wiring for Supervised Notifying Appliance Circuit
3 Polarity shown in Normal State Leased Line Circuits are Power Limited per NEC 760 External Resistance K-5K OHMS NOTES:. Polarity shown in supervisory state.. The total loop resistance from the LLM- to the Municipal Tie, including the 4.5 OHMS in the Municipal Tie, should not exceed.5 OHMS. 3. Either circuit may be used. 4. Municipal Tie circuits are not power limited. CSM-4 Loop Wiring of Supervised Municipal Tie CSM-4 Leased Line Circuit COMPATIBLE NOTIFICATION APPLIANCES Chime/ Strobes Vibrating Bells Electro-Mech. Horn/Strobes Electronic Horns -Tone with Strobe Single Stroke Bells EC-S5-C/F/S EC-S7-C/F/S EC-S75-F/S EC-S0-F/S Strobes S5-F/FS/FT/S/ST S7-F/FS/FT/S/ST S75-F/FS/FT/S/ST S0-F/FS/FT/S/ST HN-S5S-C/F/S HN-S7S-C/F/S HN-S75S-F/S Electronic Horns -Tone EH-C/F/S MH-G/GW MH-U/UW MH-S5-U/UW MH-S7-U/UW MH-S75-U/UW MH-S0-U/UW BE-F/LC BF-F/LC BS-F/LC BT-F/LC Electronic S.W./Strobes EW-S5-C/F/S EW-S7-C/F/S EW-S75-F/S EW-S0-F/S Sync. Electro-Mech. Horn/Strobes Mini-Horns HNH-S5S-C/F/S HNH-S7S-C/F/S HNH-S75S-F/S Chimes EC-C/F/S CH-F/LC/SS MHT-G/GW MHT-U/UW MHT-S5-U/UW MHT-S7-U/UW MHT-S75-U/UW MHT-S0-U/UW ELECTRICAL CONNECTIONS FOR MUNICIPAL TIE (NFPA 7). All wiring must be in accordance with Article 760 of NEC or local building codes. 3. Both circuits are not power limited. 4. Electrical Ratings: Trip Coil: Trip Current: Supervisory Current: Voltage: HN-S5-C/F/S HN-S7-C/F/S HN-S75-F/S HN-S0-F/S Horns/ 3-Tone MC-C/F/S MC-S5-C/F/S MC-S7-C/F/S MC-S75-F/S MC-S0-F/S Sync. Horns/ 3-Tone MC-S5S-C/F/S MC-S7S-C/F/S MC-S75S-F/S Electronic Slow Whoop EW-C/F/S MHST-G/GW MHST-U/UW MHST-S5S-U/UW MHST-S7S-U/UW MHST-S75S-U/UW HNH-S5-C/F/S HNH-S7-C/F/S HNH-S75-F/S HNH-S0-F/S Horns/ 3-Tone MTL-C/F/S MTL-S5-C/F/S MTL-S7-C/F/S MTL-S75-F/S MTL-S0-F/S Sync. Horns/ 8-Tone MTL-S5S-C/F/S MTL-S7S-C/F/S MTL-S75S-F/S Electro-Mech. Horns HN-C/EP/F/S HNH-C/EP/F/S Mini-Horns/Strobes 8-Tone MMT-G/GW MMT-U/UW MMT-S5-U/UW MMT-S7-U/UW MMT-S75-U/UW MMT-S0-U/UW EH-S5-C/F/S EH-S7-C/F/S EH-S75-F/S EH-S0-F/S Sync. Strobes S5S-F/FS/FT/S/ST S7S-F/FS/FT/S/ST S75S-F/FS/FT/S/ST Synchronizing Control Module SCM-F/FW SEA TTH Tri-Tone Horns Sync. Mini-Horns/ Strobes 8-Tone MMT-S5S-U/UW MMT-S7S-U/UW MMT-S75S-U/UW The SCM-F/FW Synchronizing Control Module must be used with these modules to synchronize the strobes. 4.5 ohms 0 to 30mA DC (momentary) ma DC 8 to 3 VDC The total loop resistance from the LLM- to the Municipal Tie, including the 4.5 ohms in the Municipal Tie, should not exceed.5 ohms. 5. Minimum emergency power: 60 hour standby 5 minute alarm BE-SS BF-SS BS-SS BT-SS Bell/Strobe Plate S5-6060H/6090V S7-6060H/6090V S V S0-6090V Sync. Bell/Strobe Plate S5S-6060H/6090V S7S-6060H/6090V S75S-6090V Suffixes C = Ceiling EP = Explosion Proof F = Flush FT = Flush w/terminals G = Gang Mount H = Horizontal LC = Low Current S = Surface SS = Single Stroke ST = Surface w/terminals U = Universal Mount V = Vertical W = White ELECTRICAL CONNECTIONS FOR LEASED LINE (NFPA 7 Remote Station). When a CSM-4 circuit is used as a Leased Line trouble output, SW and SW on switch S must be set. These positions permit the default trouble bus to activate the trouble line. Refer to TABLE 3 to set them. 3. All wiring must be in accordance with Article 760 of NEC or local builsing codes. 4. Both Leased Line circuits are power limited to NFPA 70 per NEC Article Leased Line circuit rating: 4 VDC open circuit Load must be a compatible polarity reversal labeled remote station receiver unit. Rated current: 3mA to 9mA, alarm/supervisory External circuit resistance: K to 5K ohms 6. Minimum emergency power: 60 hour standby / 5 minute alarm
4 Notes:. Polarity shown in supervisory state.. Maximum line resistance 3 ohms. 3. Releasing zones are not power limited to NFPA 70 per NEC Releasing solenoids are supervised for opens only. Table Setting the Mode Of Operation (Using S3, S4 and G, G) For Circuit S3 Position G Audibles [NAC] (NFPA 7 Local) Municpal Tie (NFPA 7) Leased Line (NFPA 7 Remote Station) Releasing Service (NFPA A)** Releasing Service (NFPA3)** Releasing Service (NFPA 00)** Illegal (Results in a trouble on the CSM-4) For Circuit S4 Position G CSM-4 Loop Wiring for use as Releasing Service (per NFPA A, NFPA 3, and NFPA 00) ELECTRICAL CONNECTIONS FOR RELEASING SERVICE (per NFPA A, NFPA 3, and NFPA 00). Set all positions of switch S to OFF (OPEN). 3. All wiring must be in accordance with Article 760 of NEC or local building codes. 4. Both circuits are not power limited. 5. Solenoids are supervised for opens only. 6. Electrical Ratings: Solenoids: 4 VDC, 6.8 watts max, 700mA max Supervisory Current:mA max Alarm Current: 800mA max Wire Resistance: 3 ohms max 7. Compatible Solenoids: NFPA 3: ASCO Model T80A07 ASCO Model R80A07 ASCO Model 80A07 SKINNER Model LVLBX5 NFPA A: PYRO P/N PYRO P/N PYRO P/N PYRO P/N NFPA 00: KIDDE FENWAL Model No End of Line Device used. Audibles [NAC] (NFPA 7 Local) Municpal Tie (NFPA 7) Leased Line (NFPA 7 Remote Station) Releasing Service (NFPA A)** Releasing Service (NFPA3)** Releasing Service (NFPA 00)** Illegal (Results in a trouble on the CSM-4) ** Canada Only: Do not cut jumpers G and G for NFPA A, NFPA 3 and NFPA 00 Table 3 Setting the Degrade Trouble Modes on S Leased Line Trouble Note: If circuit or circuit is not used for leased line trouble, dipswitches SW or SW must be off (open). OFF (no default activation) For Circuit SW4 SW3 CONTINUOUS (active on default alarm) SEC ON, SEC OFF (infinite repeat) DO NOT USE For Circuit No Trouble Activation Leased Line Trouble For Circuit No Trouble Activation OFF (no default activation) For Circuit SW6 SW5 SW SW Table 4 Setting the Degrade Alarm Modes on S CONTINUOUS (active on default alarm) SEC ON, SEC OFF (infinite repeat) DO NOT USE Note: When circuits are used for leased line supervisory, the alarm default modes must be set to OFF (open)
5 MXL Releasing Service Wiring Diagram (per NFPA A, NFPA 3, and NFPA 00) Notes:. Use only listed solenoids from Table.. Solenoids supervised for opens only. 3. Polarity shown in supervisory condition. 4. Releasing circuits are not power limited. 5. No end of line device used. 6. Configure CSM-4 circuits as Municipal Tie. 7. Maximum of 5 Pre-Action/Deluge zones per MOM Each MOM-4 must be powered from a separate ALARM-SAF power supply. 9. Set all position of S on the CSM-4 ro OFF (OPEN). Table Application Make Model Maximum # per MOM-4 NFPA 3 (Preaction Deluge) NFPA A (Halon) NFPA 00 (FM-00) Skinner LVLBX5, 4V 5 ASCO TB0A07, 4V 5 ASCO R80A07, 4V 5 ASCO 80A07, 4V 5 CPY , 4V 8 CPY , 4V 8 CPY , 4V 8 CPY , 4V 8 CPY
6 NOTICE: The use of other than Cerberus Pyrotronics detectors and bases with Cerberus Pyrotronics control equipment will be considered a misapplication of Cerberus Pyrotronics equipment and as such void all warranties either expressed or implied with regards to loss, damage, liabilities and/or service problems. Cerberus Pyrotronics 8 Ridgedale Avenue Cedar Knolls, NJ 0797 Tel: (0) FAX: (0) Website: 5/97 0M CPY-IG Printed in U.S.A. Cerberus Pyrotronics 50 East Pearce Street Richmond Hill, Ontario L4B, B7 CN Tel: (905) FAX: (905) May 997 Supersedes sheet dated 3/96
AND ARCHITECT SPECIFICATIONS
SXL Conventional Zone Fire Alarm Control Panel ENGINEER AND ARCHITECT SPECIFICATIONS 4 Zones Expandable to 8 Zones Microprocessor Based Control Factory Programmed Field Configurable 2 Style Y Notification
More informationAND ARCHITECT SPECIFICATIONS
PXL Conventional Zone Fire Alarm Control Panel ENGINEER AND ARCHITECT SPECIFICATIONS 12 Zone System Expandable to 32 10 Amp Base Power Supply Multiple Power Supplies Available - Local or Remote 4 Notification
More informationAdvanced Protection System
MXL-IQ Advanced Protection System FirePrint Application Specific Detection Capacity for up to 240 Intelligent Analog Detectors Expandable Up to a Stand Alone System Capacity of 998 Input and Output Points
More informationFire Safety. Installation Instructions Model SMB-2 Main Control Board OPERATION INSTALLATION
Fire Safety Installation Instructions Model SMB- Main Control Board OPERATION The SIEMENS Model SMB- board in each MXL-IQ System controls operations and monitors input device identity, network communication,
More informationAND ARCHITECT SPECIFICATIONS
MXL-IQ Advanced Life Safety System ENGINEER AND ARCHITECT SPECIFICATIONS FirePrint Application Specific Fire Detection Capacity for up to 240 Intelligent Analog Detectors Expandable Up to a Stand Alone
More informationSpecification/ Data Sheet
Specification/ Data Sheet TRITON RP Agent Release Control Panel FEATURES Agent Release Control Panel designed specifically for suppression release operation with: Four initiating device circuits (IDCs)
More informationMXL/MXLV 19 Rack Mount Equipment
MXL/MXLV 19 Rack Mount Equipment Models: MXL-RK1, ACM-RK, MKB-RK, MMB-RK, MOM-RK, MPS-RK, TSP-RK, VSM-RK, CABLES-RK, MKB-3 ENGINEER AND ARCHITECT SPECIFICATIONS Standard 19 Rack Mounting for MXL and MXLV
More informationConventional Releasing Control Panel
s Data Sheet Fire Safety Products Conventional Releasing Control Panel Pre-Action Deluge Agent-Releasing Fire System Model TXR-320 Remote configurable Up to two (2) hazard areas Operable with the following:
More informationFire Control Panels. Automatic Extinguishing, Deluge and Preaction Sprinkler System Releasing Control
MANUAL RELEASE - IDNET IN + +IDNET IN - RED NA C+ N A C - COIL SUPERVISION MODULE ( 2 AMP) 28-946 INSTALLATION INSTRUCTIONS 574-437 REV YEL MA IN T A IN /4 "S E P A R A T IO N BETW EEN POW ER LIMITED (
More informationData Sheet Fire Safety & Security Products. System Overview. Initiating Circuits SXL-EX FACP 7906
s Data Sheet Fire Safety & Security Products SXL-EX Fire Alarm Control Panel Conventional Zone Fire Alarm Control Panel ARCHITECT AND ENGINEER SPECIFICATIONS Four (4) zones expandable to eight (8) zones
More information30.45 Electric Release PDRP-2001
The PDRP-2001 Fire Alarm Control Panel (FACP) is a six-zone control panel for single and dual hazard deluge and preaction applications. The FACP is compatible with conventional input devices (2-wire or
More informationRelease Control Fire Alarm Systems
SYSTEM ABORT PUSH AND HOLD COIL SUPERVISION MODULE (2 AMP) 2081-9046 RED INSTALLATION INSTRUCTIONS 574-437 REV YEL NAC+ MAINTAIN 1/4" SEPARATION BETWEEN POWER LIMITED (RED/) AND NONPOWER S LIMITED (YEL/)
More informationXP6-C. Six Circuit Supervised Control Module and SYNC-1 Accessory Card
XP6-C Six Circuit Supervised Control Module and SYNC-1 Accessory Card General NOTIFIER s XP6-C six-circuit supervised control module provides intelligent alarm systems with supervised monitoring of wiring
More information08 Series Notification Appliances AS / AH & AS Audible Strobe Appliances and AH Audibles Application: Indoor / Outdoor
s Data Sheet Fire Safety & Security Products 08 Series Notification Appliances AS / AH & AS Audible Strobe Appliances and AH Audibles Application: Indoor / Outdoor AS-MC-CW AS-MC-R AH-W AH-R Product Overview
More informationAL802ULADA. NAC Power Extender. Installation Guide. (See Application Guide for additional information) Rev
AL802ULADA NAC Power Extender Installation Guide (See Application Guide for additional information) Rev. 031703 Overview: The Altronix AL802ULADA is an extremely cost effective 8 amp voltage regulated
More informationModel PAD-3 Distributed Power Module NAC Expander Installation, Operation, and Maintenance Manual
Fire Safety Model PAD-3 Distributed Power Module NAC Expander Installation, Operation, and Maintenance Manual Siemens Building Technologies, Inc. Siemens Building Technologies, Ltd. 8 Fernwood Road 2 Kenview
More informationAL800ULADA. NAC Power Extender. Installation Guide
AL800ULADA NAC Power Extender Installation Guide Rev. 122000 AL800ULADA - NAC Power Extender Overview: The Altronix AL800ULADA is an extremely cost effective 8 amp voltage regulated remote power supply/battery
More informationTECHNICAL DATA OBSOLETE
Deluge Devices 270a 1. PRODUCT NAME VIKING PAR-3 Available since 1991 2. MANUFACTURED FOR: THE VIKING CORPORATION 210 N. Industrial Park Road Hastings, Michigan 49058 U.S.A. Telephone: (269) 945-9501 (877)
More informationAL600ULADA. NAC Power Extender. Installation Guide
AL600ULADA NAC Power Extender Installation Guide Rev. 122000 AL600ULADA - NAC Power Extender Overview: The Altronix AL600ULADA is an extremely cost effective 6.5 amp voltage regulated remote power supply/battery
More informationElectric Release Panel Wiring Tips
R IPS CARBO STEEL PIPE FIRE PROTECTIO PRODUCTS Electric Release Panel Wiring Tips 30.4 VICTAULIC IS A ISO 900 CERTIFIED COMPAY Model PDRP-00 Releasing Panels are compact single enclosure units containing
More informations Notification Appliances
s Notification Appliances Data Sheet Fire Safety Products AS & AH Audible Horn Strobe / Audible Horn Appliances Application: Indoor / Outdoor AS-MC-CW AS-MC-R AH-R AH-W Product Overview Fast installation
More informationTECHNICAL DATA. Humidity: 85% Relative Humidity (non-condensing) at 90 F (32 C) maximum.
September 29, 1997 Firecycle III 433 a 1. PRODUCT NAME VIKING Model E-1 Manufactured 1997 Present 2. MANUFACTURED FOR THE VIKING CORPORATION 210 N Industrial Park Road Hastings, Michigan 49058, U.S.A.
More informationgood things in small packages
FireShield Control Panels good things in small packages life safety for small buildings and shops A perfect arrangement FireShield offers the very best conventional fire alarm technology available, with
More informationAddressable Fire Alarm Control Panel
PRODUCT SPECIFICATION XR2400F Addressable FACP Addressable Fire Alarm Control Panel Description The DMP XR2400F Addressable Fire Alarm Control Panel is an expandable Fire Alarm Control with built-in DACT
More informationPSN-1000 & PSN 1000(E) Installation Manual
PSN-1000 & PSN 1000(E) Installation Manual Potter Electric Signal Company, LLC St. Louis, MO Customer Service: (866) 240-1870 Technical Support: (866) 956-1211 Fax: (314) 595-6999 www.pottersignal.com
More informationInstallation Guide for AL800UL-ADA. NAC Power Extender. Rev
Installation Guide for AL800UL-ADA NAC Power Extender Rev. 090500 Overview: The Altronix AL800UL-ADA is an extremely cost effective 8 amps voltage regulated remote power supply /battery charger. The AL800UL-ADA
More informationFMR Installation Instructions. Addressable Fire System Controller
FMR-7033 EN Installation Instructions Addressable Fire System Controller EN 2 FMR-7033 Installation Instructions Contents Contents Contents...2 1.0 Introduction...3 2.0 Description...3 3.0 Device Mounting...3
More information'08 Series Notification A liances
SIEMENS Data Sheet Fire Safety & Security Products '08 Series Notification A liances AS I AH & AS - Audible Strobe Appliances and AH Audibles AS-MC-CW AS-MC-R AH-W AH-R Product Overview - Fast installation
More informationDATA SHEET CYBERCAT 254 INTELLIGENT FIRE ALARM CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D
DATA SHEET CYBERCAT 254 INTELLIGENT FIRE ALARM CONTROL SYSTEM DESCRIPTION Fike s CyberCat 254 (P/N 10-066) is a state-of-the-art true intelligent digital peer-to-peer modular fire alarm control system.
More informationCerberus TM PRO Fire Safety System A comprehensive fire-protection system
s Data Sheet Fire Safety & Security Products Cerberus TM PRO Fire Safety System A comprehensive fire-protection system Standard 50-point, 252-point and 504-point-capacity systems Remote viewing for the
More informationFire Safety. Installation Instructions Model CSM-4 Controllable Signal Module OPERATION INSTALLATION
Fire Safety Installation Instructions Model SM- ontrollable Signal Module OPERATIO The Model SM- ontrollable Signal Module has two fully supervised, programmable circuits. The outputs supply two lass B
More informationAEGIS FEATURES DESCRIPTION. Conventional Fire Alarm-Suppression Control Unit. Effective: March Programmable Relays
AEGIS Conventional Fire Alarm-Suppression Control Unit FEATURES Agency Approvals FM Approved FM Approved to ANSI/UL 864, 9th edition FM Approved to ULC-S527-99 Other domestic U.S. approvals/listings pending/
More informationCommercial and Light Industrial Fire Alarm Control Panel
FireSystem 2000 Commercial and Light Industrial Fire Alarm Control Panel Features Easily expandable. All new plug-in board design Two supervised audible circuits Lamp and system trouble circuit test Ground
More informationSignature Series Auto-Sync Output Module (CC1S)
Signature Series Auto-Sync Output Module (CC1S) Product description Mounting The Signature Series can be mounted in a North American 2-1/2 in (64 mm) deep 2-gang box or a standard 4 in square box 1-1/2
More informationMXL/MXLV Enclosuress & Equipment Models: MME-3, MBR-MP, MLE-6, MBR-3MP, MDL-1, MDB-1, MDG-1, MHD-1, MHD-2, MHD-3, MHD-4
MXL/MXLV Enclosuress & Equipment Models: MME-3, MBR-MP, MLE-6, MBR-3MP, MDL-1, MDB-1, MDG-1, MHD-1, MHD-2, MHD-3, MHD-4 ENGINEER AND ARCHITECT SPECIFICATIONS Enclosure & Door Package (MME-3) Standard Size
More informationDesigo TM Fire Safety System A comprehensive fire-protection system
s Desigo TM Fire Safety System A comprehensive fire-protection system Standard 50-point, 252-point and 504-point-capacity systems Remote viewing for the 252- point and 504-point systems One (1) or (2)
More informationSELECT-A-HORN/STROBE SERIES
SELECT-A-HORN/STROBE SERIES Features Description Mircom s Select-A-Strobe/Horn Series is designed to comply with the Americans with Disability Act (ADA) and meet UL standard 1971 requirements for emergency
More informationLifeAlarm Fire Alarm Controls
UL, ULC Approved* LifeAlarm Fire Alarm Controls 4009 IDNet NAC Extender for Control with IDNet Communications or Conventional NACs Features Provides additional notification appliance circuit (NAC) capacity
More informationLifeAlarm Fire Alarm Control Panels
LifeAlarm Fire Alarm Control Panels UL, ULC Approved* Features Control panel operator convenience features: Wide viewing angle 2 x 20 (40 character) alphanumeric LCD and dedicated LEDs provide convenient
More informationCHEETAH XI INTELLIGENT SUPPRESSION CONTROL SYSTEM
CHEETAH XI INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION Fike s Cheetah Xi (P/N 10-068) is a state-of-the-art true intelligent digital peer-topeer modular suppression control system. It is ideal for
More informationInstallation Instructions Model DLC
Installation Instructions Model DLC Device Loop Card INTRODUCTION OPERATION The SIEMENS Model DLC Device Loop Card is the interface for connection of FireFinder-XLS smoke detectors, manual stations, monitor
More informationTECHNICAL DATA. multi-hazard. model vfr400. Release Control Panel 290a. January 16, 2014
January 16, 2014 Release Control Panel 290a 1. Description The Viking VFR400 is a microprocessor based releasing control panel for use on preaction, deluge, Surefire, Firecycle multicycle sprinkler systems,
More informationPEGAsys. Multi-Loop Intelligent Suppression Control System FEATURES DESCRIPTION. Effective: March 2007 K
PEGAsys Multi-Loop Intelligent Suppression Control System A UTC Fire & Security Company Effective: March 2007 K-76-028 FEATURES UL Listed CSFM Approved MEA Approved Peer-to-Peer Networking (to 32 nodes)
More informationSupplement to The PDRP-1001/PDRP-1001A/PDRP-1001E Deluge Preaction Control Panel Manual
Supplement to The PDRP-1001/PDRP-1001A/PDRP-1001E Deluge Preaction Control Panel Manual Replace the following pages of Document Number 50734 (I56-993-01/D770-19-00), Revision B with the corresponding revised
More informationAddressable NAC Output Module D327A
Installation Instructions Notice Addressable NAC Output Module D327A These instructions cover the installation of the D327A Addressable NAC Output Module in an analog system controlled by a Bosch D8024,
More informationFireSystem 2000 Commercial and Light Industrial Fire Alarm Control Panel
PROTECTOWIRE FireSystems Features Easily expandable Two supervised audible circuits Lamp and system trouble circuit test Ground fault detection Initiating device circuit (IDC) alarm test Monitors up to
More informationTrueAlert Addressable Notification Appliances
UL, ULC Listed* TrueAlert Addressable Notification Appliances Audible/Visible Notification Appliances; Multi-Tone Horn/Strobe with 520 Hz Output Features Individually addressed and controlled multi-tone
More informationANNUNCIATOR FIXED MODULE
12 Clintonville Road Northford, CT 06472 Phone: 203-484-7161 Fax: 203-484-7118 THE ANNUNCIATOR FIXED MODULE Installation Manual for the AFM-16ATF and AFM-32AF Annunciator Modules Document # 15970 3/27/95
More information1. POWERPATH Operation
273 Branchport Avenue Long Branch, NJ 07740 (800) 631-2148 www.wheelockinc.com Thank you for using our products. INSTALLATION INSTRUCTIONS MODEL PS-12/24-6 POWERPATH Use this product according to this
More informationFire Safety. Installation Instructions. Model ADBX-11. Audible Base INTRODUCTION. Model ADBX-11
Fire Safety Installation Instructions Model ADBX11 Audible Base INTRODUCTION Model ADBX11 The SIEMENS Model ADBX11 Audible Base consists of a standard Series 11 base combined with an audible device. All
More informationDATA SHEET CHEETAH XI 50 INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D
DATA SHEET CHEETAH XI 50 INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION Fike s Cheetah Xi 50 (P/N 10-071) is a state-of-the-art true intelligent digital peer-to-peer modular suppression control system.
More informationNETWORK FIRE ALARM CONTROL PANEL. Features
NETWORK FIRE ALARM CONTROL PANEL FX-2009-12N Description FX-2009-12N in a BB-5008 enclosure. Mircom s FleX-Net TM FX-2009-12N Network Fire Alarm Control Panel offers modular components to meet a wide variety
More informationCerberus PRO A comprehensive fire-protection system
Cerberus PRO A comprehensive fire-protection system Cerberus TM ARCHITECT AND ENGINEER SPECIFICATIONS Standard 252-point and 504-point fire systems Remote viewing for the 252- point and 504-point systems
More informationAir Duct Housings. Description
Air Duct Housings Series IL, and Series 3 Ionization or Photoelectric Detectors Optional Relays for Supplementary Equipment Operation Optional Control Module for Self-contained Operation (Series 3 Detectors
More informationThe PDRP-1001/PDRP-1001A/PDRP-1001E Deluge Preaction Control Panel
System Sensor 3825 Ohio Avenue St. Charles, IL 60174 1-800-SENSOR2 Fax: 630-377-6495 PDRP1001.CD The PDRP-1001/PDRP-1001A/PDRP-1001E Deluge Preaction Control Panel Manual Document 50734 C 03/11/99 Revision:
More informationZ-20 Fire Control Panels
MANUAL RELEASE SYSTEM ABORT PUSH AND HOLD - I D N E T I N + + ID N E T I N - RE D NAC+ N A C - BLK C O ILS U P E R V IS IO NM O D U L E ( 2A M P )2 0 8 1-9 0 4 6 IN S T A L L A T IO NIN S T R U C T IO
More informationPOWERPATH PS-8 (105531) PS-8E (100263) PS-6 (105530) PS-6E (100262)
PATH PS-8 (105531) PS-8E (100263) PS-6 (105530) PS-6E (100262) NAC ETENDER SUPPLIES Installation Instructions 273 Branchport Avenue, Long Branch, NJ 07740-6899 Ph: (800) 631-2148 Fax: (732) 222-8707 Web
More informationTrueAlert Notification Appliances
TrueAlert Notification Appliances UL Listed; FM, CSFM and MEA (NYC) Approved* Non-Addressable Audible/Visible Notification Appliances with SmartSync Operation of Strobes and Horns Features Wall mount audible/visible
More informationAgent Release Control Panel
Agent Release Control Panel System Capacity Annunciators: 8 Electrical Specifications RP-2002 (FLPS-7 Power Supply): 120 VAC, 60 Hz, 3.66 amps RP-2002E (FLPS-7 Power Supply): 240 VAC, 50 Hz, 2.085 amps
More informationRANGER 8600 DOWNLOADABLE CONTROL COMMUNICATOR INSTALLATION MANUAL
RANGER 8600 DOWNLOADABLE CONTROL COMMUNICATOR INSTALLATION MANUAL TABLE OF CONTENTS GENERAL DESCRIPTION... 2 STANDARD AND OPTIONAL PARTS LIST... 2 PARTS DIAGRAM... 3 TERMINAL DRAWING AND SPECIAL NOTES...
More informationTrueAlert Addressable Notification Appliances
UL, ULC Approved* TrueAlert Addressable Notification Appliances Audible Notification Appliances; Multi-Tone Horns with 520 Hz Output Features Individually addressed and controlled TrueAlert ES multi-tone
More informationFire Control Panels. Automatic Extinguishing, Deluge and Preaction Sprinkler System Releasing Control
MANUAL RELEAE - IDNET IN + +IDNET IN - R E D N A C + N A C - C O IL U P E R V I IO N MOD U L E ( 2 A MP ) 2 8-9 4 6 IN T A L L A T ION IN T R U C T ION 5 7 4-4 3 7 R E V Y E L MA IN T A IN /4 " E P A R
More informationAL802ULADA. NAC Power Extender. Installation Guide. (See Application Guide for additional information)
AL802ULADA NAC Power Extender Installation Guide (See Application Guide for additional information) Rev. 042010 Agency Listings: UL Listed Control Units for Fire Protective Signaling Systems (UL 864).
More informationINTELLIGENT FIRE ALARM CONTROL PANEL
INTELLIGENT FIRE ALARM CONTROL PANEL FX-2000 SERIES Description Mircom s FX-2000 Series Intelligent Analog Fire Alarm Control Panel is designed to provide maximum flexibility of analog system requirements
More informationControl/Communicator Installation Manual
DAS NETWORX NX-12 Control/Communicator Installation Manual General Description...2 Ordering Information...2 Option Definitions...3 Programming the LED Code Pads...5 Programming the NX-12...9 Types of Programming
More informationD7024 Fire Alarm Control Panel
D7024 Fire Alarm Control Panel The D7024 offers accurate, consistent performance with a feature set that elevates this panel to the top of its class. Fire systems you can rely on. D7024 24V Addressable
More informationThis wiring diagram describes circuit connections for all models of the Series Quaestor-SZU Releasing Fire Control
File: S8485 Wiring Diagram This wiring diagram describes circuit connections for all models of the Series Quaestor-SZU Releasing Fire Control Panel. The operation of this product is intended for indoor
More information9822 Marine Fire and Detection Equipment. Cerberus PRO. Cerberus PRO. Marine Fire and Detection Equipment. Models FH-2071-UM, BP-62 and USCG-HPLATE
Cerberus PRO Marine Fire and Detection Equipment s FH-2071-UM, BP-62 and USCG-HPLATE Cerberus PRO Fire Safety Products ARCHITECT AND ENGINEER SPECIFICATIONS Marine equipment is used with Cerberus PRO 252-point
More informationDesigo TM Fire Safety System A comprehensive fire-protection system
s Desigo TM Fire Safety System A comprehensive fire-protection system Standard 252-point and 504-point capacity systems Remote viewing for the 252- point and 504-point systems One (1) or (2) two-heightunit
More informationARCHITECT AND ENGINEER SPECIFICATIONS
s Desigo Fire Safety System A comprehensive fire-protection system Standard 50-point, 252-point and 504-point-capacity systems Remote viewing for the 252- point and 504-point systems One (1) or (2) two-heightunit
More informationTrueAlert Non-Addressable, Multi-Candela Notification Appliances Installation Instructions
TrueAlert NonAddressable, MultiCandela Notification Appliances Installation Instructions PRODUCT IDENTIFICATION REFERENCE (See Page 4 for Detailed Product Specifications) Type Mount Model Color Operation
More informationCONVENTIONAL FIRE ALARM CONTROL UNITS. MR-2300 SERIES Fire Alarm Control Units MEA
CONVENTIONAL FIRE ALARM CONTROL UNITS MR-2300 SERIES Fire Alarm Control Units Description Secutron s MR-2300 Series fire alarm control panels consist of six and twelve zone models which are equipped with
More informationFireSeeker Fire Alarm Control Panel Model FS-250 Installation, Operation and Maintenance Manual
FireSeeker Fire Alarm Control Panel Model FS-250 Installation, Operation and Maintenance Manual P/N 315-049353-1 Siemens Building Technologies Fire Safety TABLE OF CONTENTS INTRODUCTION... 1 CONTROL PANEL
More informationMR-2602 Two Zone Fire Alarm Control Panel
MR-2602 Two Zone Fire Alarm Control Panel Installation Manual Secutron LT-2015 Rev.3 July 2010 Table of Contents 1 Introduction 1.1 The MR-2602 Fire Alarm Control Unit... 11 1.1.1 General features...
More information4100U City and Relay Cards Installation Instructions
4100U City and Relay Cards Installation Instructions Introduction This publication describes the installation procedure for the following: 4100-6031/6032 City Circuit Cards 4100-6033 Alarm Relay Card Inspecting
More informationInstallation Instructions Model ABHW-4S
Installation Instructions Model ABHW-4S Intelligent Audible Base for Sleeping Area with 520Hz Low Frequency Sounder Introduction Application note The Model ABHW-4S audible base from Siemens Industry, Inc.
More informationFireNET Plus Wiring Instructions
FireNET Plus Wiring Instructions This manual provides wiring instructions for the 1 loop and 2 loop version of the FireNET Plus panels, which supports our finest Hochiki s DCP protocol. Note: Refer to
More informationTrueAlert Multi-Candela Notification Appliances
TrueAlert Multi-Candela Notification Appliances UL, ULC, CSFM Listed; FM Approved* Features 24 VDC high intensity notification appliance common features: Xenon strobe with intensity selectable as 135,
More informationINTELLIGENT FIRE ALARM AND AUDIO NETWORK SYSTEM. Features
INTELLIGENT FIRE ALARM AND AUDIO NETWORK SYSTEM Description Mircom s FleX-Net TM Series Network Fire Alarm Control Panels offer modular components to meet a wide variety of applications. Designed for peerto-peer
More informationSPECIFICATION MICROMIST FIRE SUPPRESSION SYSTEM WITH CHEETAH Xi 50 CONTROL PANEL
SECTION 1 - GENERAL CONDITIONS I. SCOPE: This specification outlines the requirements for a Fike Micromist Water Mist Fire Suppression System with a Cheetah Xi 50 addressable detection and control system.
More informationDimensions of the Optional Mounting Box (BB-400R/W)
Wall and Ceiling Notification Appliances This manual applies to the following models Horn only FH-400-WW and FH-400-RR - wall and ceiling mounted horn Strobe only FS-400-WW and FS-400-RR - wall mounted
More informationThe PDRP-1002/PDRP-1002E Agent Release Control System
System Sensor 3825 Ohio Avenue St. Charles, IL 60174 1-800-SENSOR2 Fax: 630-377-6495 PDRP1002.CD The PDRP-1002/PDRP-1002E Agent Release Control System Manual Document 51135 A 03/11/99 Revision: I56-1358-00
More informationSP40S-D. Kingfisher Company, inc. Features: Description:
Kingfisher Company, inc. SP40S-D Features: Multi-use applications The system can function as an evacuation system, an emergency messaging system, and an employee notification system Fire code applications
More informationINSPECTION AND TESTING FORM
INSPECTION AND TESTING FORM Date: Time: SERVICE ORGANIZATION Name: Address: Representative: License No.: MONITORING ENTITY Contact: Monitoring Account Ref. No.: TYPE TRANSMISSION McCulloh Multiplex Digital
More informationMODUL-R FIRE ALARM CONTROL PANELS. MR-2900/MR-2920 Addressable Fire Alarm Control Panels MEA. Features. Description
MODUL-R FIRE ALARM CONTROL PANELS MR-2900/MR-2920 Addressable Fire Alarm Control Panels Description MR-2900 Fire Alarm Control Panel The MR-2900 fire alarm system control unit is the heart of a sophisticated
More informationFire Safety. Installation Instructions Model MMB-2 Main Control Board OPERATION. INSTALLATION Always remove power before installation.
Fire Safety nstallation nstructions Model MMB- Main ontrol Board OPERATON The SEMENS Model MMB- board in each MXL System controls operations and monitors input device identity, network communication, and
More informationOSU PROJECT NO PAGE 1 02 NOV 2006 SECTION FIRE ALARM SYSTEM
OSU PROJECT NO. 30-04-15 PAGE 1 PART 1 GENERAL 1.1 WORK INCLUDED A. Provide all labor, materials, and equipment required to provide a complete and operating system of manual and automatic detection devices,
More informationSPECIFICATION MICROMIST FIRE SUPPRESSION SYSTEM WITH SHP-PRO CONTROL PANEL
SECTION 1 - GENERAL CONDITIONS I. SCOPE: This specification outlines the requirements for a Fike Micromist Water Mist Fire Suppression System with automatic detection and control. The work described in
More informationZNS MICROPROCESSOR BASED CONVENTIONAL FIRE ALARM CONTROL PANEL. Installation & Operation Manual
ZNS MICROPROCESSOR BASED CONVENTIONAL FIRE ALARM CONTROL PANEL Installation & Operation Manual The Gamewell Company 60 Pleasant Street Part No. 71774 Ashland, MA 01721 Issue 4 12/4/98 PROPRIETARY MATERIAL
More informationMS-4012/4024 and CMS-4012/4024. Instruction Manual for the. Fire Alarm Control Panels
R 12 Clintonville Road, Northford, CT 06472 Phone: (203) 484-7161 FAX: (203) 484-7118 Instruction Manual for the MS-4012/4024 and CMS-4012/4024 Fire Alarm Control Panels Document 15586 5/11/93 Revision:
More informationDS7400Xi Addressable Control/ Communicator
DS7400Xi Addressable Control/ Communicator DS7400Xi DS7400Xi-EXP 110VAC operation 220VAC operation Remotely Programmable WDSRP (Windows Detection Systems Remote Programming Software), allows the systems
More informationSPECIFICATION FOR A TOTAL FLOOD ECARO-25 TM CLEAN AGENT FIRE SUPPRESSION SYSTEM FOR USE WITH THE SHP PRO CONTROL PANEL SYSTEM
SECTION 1 - GENERAL CONDITIONS SPECIFICATION FOR A TOTAL FLOOD I. SCOPE: This specification outlines the requirements for a Total Flood ECARO-25 TM clean agent fire suppression system utilizing HFC-125
More informationDesigo Fire Safety Marine Fire and Detection Equipment Models FH-2071-UM, BP-62 and USCG-HPLATE
s Desigo Fire Safety Marine Fire and Detection Equipment s FH-2071-UM, BP-62 and USCG-HPLATE ARCHITECT AND ENGINEER SPECIFICATIONS Marine equipment is used with Desigo 252-point and 504-point addressable
More informationFire Burglary Instruments Inc. XL-2G Gold Control/Communicator Installation Training Seminar Rev. 5/96
Fire Burglary Instruments Inc. XL-2G Gold Control/Communicator Installation Training Seminar Rev. 5/96 XL-2G Gold Product Overview 7 Zones (6 programmable + panic or keyswitch zone) Fast Loop Response
More informationDatasheet. Dry-pipe Vacuum Sprinkler System, Electric Release Self contained unit. Features. FIREFLEX VACTEC description
FIREFLEX VACTEC description This FIREFLEX VACTEC integrated fire protection system consists of a vacuum system trim totally pre-assembled, prewired and factory tested. All electrical and mechanical components
More informationCONVENTIONAL FIRE ALARM CONTROL PANELS. SFC-200 Series Fire Alarm Control Panels MEA. Features. Description
CONVENTIONAL FIRE ALARM CONTROL PANELS SFC-200 Series Fire Alarm Control Panels Description Summit s SFC-200 Series fire alarm control panels consist of six and twelve zone models which are equipped with
More informationAL1002ULADA. NAC Power Extender. Installation Guide. (See Application Guide for additional information) Rev X
AL1002ULADA NAC Power Extender Installation Guide (See Application Guide for additional information) Rev. 071508X Agency Listings: UL Listed Control Units for Fire Protective Signaling Systems (UL 864).
More informationTrueAlarm ES Analog Sensing
TrueAlarm ES Analog Sensing UL, ULC, CSFM Listed; FM Approved* Features TrueAlarm addressable sensor base with 520 Hz sounder TrueAlarm sensor bases with 520 Hz tone require a TrueAlarm photoelectric,
More informationTrueAlert Multi-Candela Notification Appliances
UL, ULC Approved* TrueAlert Multi-Candela Notification Appliances Non-Addressable Visible Only Amber Lens Strobes for Emergency Communications Features Visible only (V/O) 24 VDC wall mount notification
More informationMPC-6000 / MPC-7000 / RND-2
MPC-6000 / MPC-7000 / RND-2 Fire Alarm System Control Unit Installation, Operation and Maintenance Manual Siemens Building Technologies, Inc. 8 Fernwood Road Florham Park, NJ 07932 Tel: (973) 593-2600
More information