Exit/Emergency Lighting Guide

Size: px
Start display at page:

Download "Exit/Emergency Lighting Guide"

Transcription

1 Exit/Emergency Lighting Guide 1

2 Exit/Emergency Lighting Guide Table of Contents Exit Signs... 3 Exit/Emergency Combo... 5 Emergency Lights... 7 Accessories Emergency Ballasts

3 HL0301 Compact Thermoplastic Exit Sign Mounting EZ-snap mounting canopy included for top or end mount. Universal knockout pattern on back plate for wall mount. Housing Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic. Aesthetically pleasing, curved face, rounded corner design. EZ snap-out Chevron directional indicators. Illumination Ultra bright, energy efficient, long life Red or Green LEDs. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 1.2V Long life, maintenance-free, rechargeable NiCd battery (EM models only). Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Warranty & Listings Five year warranty on all electronics and housing. Battery prorated for five years. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 50 C). Certified to CEC under Title 20 Regulations. 4 5 / Sample Ordering Information HL0301B2RW Battery Backup Double Face Red Letters White Housing 11 1 Ordering Information Model Operation Number of Faces Letter Color Housing Color HL0301 Blank: AC Only B: Battery Backup 2: Double Face R: Red G: Green W: White Page 1 of 1 Rev: 3/1/2019 3

4 HL0330 All LED Exit & Emergency Lightpipe Thermoplastic Combo Mounting EZ-snap mounting canopy included for top or end mount. Universal knockout pattern on back plate for wall mount. Housing Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in white finish. Aesthetically pleasing, curved face, rounded corner design. EZ snap-out Chevron directional indicators. Illumination Ultra bright, energy eff icient white LED emergency lighting. 4.5 watt (36 LEDs x watts) per light pipe. Adjustable high performance, smooth, chrome-plated, metallized ref lector and acrylic, UV-stabilized Light Pipe lens for optimal light distribution. Long life, energy eff icient Red or Green LED EXIT sign illumination. Warranty & Listings Five year warranty on all electronics and housing. Battery prorated for five years. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 50 C). Certified to CEC under Title 20 Regulations. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 4.8V long life, maintenance-free, rechargeable NiCd battery. Remote capacity of 3.0 watts standard. Internal solid-state transfer switch automatically connects the internal battery to LED board and LED Light Pipe for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. 4 9 Ordering Information Model Number of Faces Letter Color Housing Color Options HL0330 2: Double Face R: Red W: White Powder Coated Blank: None SDT: Self Diagnostic Page 1 of 1 Rev: 3/1/2019 4

5 HL0314 All LED Exit & Emergency Thermoplastic Combo Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 9.6V Long life, maintenance-free, rechargeable NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to LED board and LED lamp heads for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Electrical Data Input Watts (W) Catalog Number Illumination Long lasting, eff icient ultra bright white LED lamp heads. 1.0 watt (8 LEDs x 0.125W) per head. High performance chrome-plated metallized ref lector and plastic lens for optimal light distribution. Adjustable LED lamp heads provides optimal centertocenter spacing. Long life, energy efficient Red or Green LED EXIT sign illumination. Mounting EZ-snap mounting canopy included for top or end mount. Universal knockout pattern on back plate for wall mount. Housing Input Amps (A) 120V 277V 120V 277V HL0314 (Red Letters) HL0314 (Green Letters) HL0314 (Red Letters) - RC HL0314 (Red Letters) - RC Warranty & Listings Five year warranty on all electronics and housing. Battery prorated for five years. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 40 C). Certified to CEC under Title 20 Regulations. Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in white finish. EZ snap-out Chevron directional indicators. 45/16 8 Sample Ordering Information HL03143RWRC Red Letters White Housing Remote Capable /16 Ordering Information Model Number of Faces HL0314 3: Universal Letter Color R: Red G: Green Housing Color W: White Options Blank: None *RC: Remote Capable *Compatible only with Howard HLRHLED remote heads (click here). 5 Page 1 of 1 Rev: 3/5/2019

6 HL0409 Thermoplastic Combo LED Electrical Data Features Long life, energy saving LED lamps Injection-molded, high impact thermoplastic construction Snap-fit faceplate installs without the use of tools Field replacement chevron directional indicator knockouts Integral wiring channels to facilitate installation Universal mounting pattern knockout in back plate for J-box mounting Universal single face and double face (extra faceplate included) Snap-fit canopy (included) enables speedy top mounting Fully adjustable glare-free lighting heads, white housing is standard, with an optional black housing available Dual-voltage input 120V or 277V AC Operation Emergency unit provided with test switch, status indicator and rechargeable battery Maintenance-free, 6V sealed lead-acid battery, provides 90 minutes of emergency power Two 5.4W DC 5 wedge-base lamps for emergency light Typical Performance Red/Green Input Voltage Input Currant (ma) Input Power (W) Power Factor (%) >0.9 >0.9 Current THD (%) <20 <20 Ordering Information Model Number of Faces Letter Color Housing Color HL0409 3: Universal Single/Double Face R: Red G: Green W: White Coated Page 1 of 1 Rev: 3/4/2019 6

7 HL0202L-W LED Thermoplastic Emergency Unit Housing Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in white. Warranty & Listings Five year warranty on all electronics and housing. Batteries prorated for five years. UL (standard)/csa (optional) listed for damp locations 0 C 50 C). Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. Illumination Long lasting, efficient, ultra bright white LED lamp heads. 1.0 watt (8 LEDs x watt) per head. High performance chrome-plated metallized reflector and plastic lens for optimal light distribution. Adjustable LED lamp heads provide optimal center-tocenter spacing. Electrical Dual 120/277 voltage standard. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 3.6V long life, maintenance-free, rechargeable NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to LED lamp heads for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. 5 Mounting Universal knockout pattern on back plate for surface mount. Snaps into place making internal electrical connections. Suitable for wall or ceiling mount. Knockout for conduit applications. 4 9 / /16 Ordering Information Model Number HL0202L-W Color White /16 7 Page 1 of 1 Rev: 3/1/2019

8 LED Adjustable Optics Thermoplastic Emergency Unit HL0223L-W Mounting Universal knockout pattern on back plate for surface mount. Snaps into place making internal electrical connections. Suitable for wall or ceiling mount. Knockout for conduit applications. Housing Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in white. Warranty & Listings Illumination Five year warranty on all electronics and housing. Batteries prorated for five years. UL (standard)/csa (optional) listed for damp locations 0 C 50 C). Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. Long life, efficient, ultra bright white LED lamp heads. 1.0 watt (8 LEDs x 0.125W) per head. High performance, chrome-plated metallized reflector and plastic lens for optimal light distribution. Two adjustable LED lamp heads provide optimal centerto-center spacing. Electrical Dual 120/277 voltage standard. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 3.6V long life, maintenance-free, rechargeable NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to LED lamp heads for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Ordering Information Model Number Color HL0223L-W White 8 Page 1 of 1 Rev: 3/1/2019

9 HL0435 Thermoplastic Micro Adjustable Emergency Lights Features Energy Saving LED Fully adjustable, glare-free lamp heads Contemporary design UL924 listed for damp location Injection-molded, high impact, UV stabilized, thermoplastic construction Dual 120V/277V voltage Maintenance free nickel cadmium battery Universal mounting plate with quickconnect feature Universal J-box pattern knock out Ordering Information Model Number Housing Color HL0435W White Page 1 of 1 Rev: 3/1/2019 9

10 HL0202SW Incandescent Thermoplastic Emergency Unit Mounting Universal knockout pattern on back plate for wall mount. Snaps into place making internal electrical connections. Knockout for conduit applications. Housing Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in white or black finish. Illumination Two fully adjustable 5.4 watt glare-free lamp heads. Smooth thermoplastic reflector and plastic lens for optimal light distribution. Warranty & Listings Five year warranty on all electronics and housing. Batteries prorated for two years. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. Meets CSA C22.2 No Requirements for unit equipment. UL listed for damp locations (20 C 50 C). Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. LVD (low voltage disconnect) prevents battery from deep discharge. 6V maintenance-free, rechargeable sealed lead acid battery. Internal solid-state transfer switch automatically connects the internal battery to lamp heads for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. 4 9 /16 Ordering Information Model Number HL0202SW Color White Page 1 of 1 Rev: 3/1/2019

11 HL024 High Wattage HL024 Series Incandescent Remote Capable Thermoplastic Emergency Unit Illumination Adjustable, glare-free PAR-Type lamp heads with 9 watt incandescent lamp heads. Mounting Universal knockout pattern on back for wall mount. Knockouts for conduit feed applications /16 Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. LVD (low voltage disconnect) prevents battery from deep discharge. Internal solid-state transfer switch automatically connects the internal battery to lamp heads for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Electrical Data Catalog Number Input Watts (W) Input Amps (A) 120V 277V 120V 277V HL HL Warranty & Listings Five year warranty on all electronics and housing. Battery prorated for two years. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for dry locations (25 C). 50 Watt Unit 100 Watt Unit Housing Injection-molded, engineering grade, 5VA f lame retardant, high-impact thermoplastic construction. Ordering Information Model 5 Rated Output Watts Lamp Remote Capability Total Connected Heads/Fixtures Voltage 1.5 hrs. 2 hrs. 4 hrs. 8 hrs. Wattage 4 hrs. 2 hrs. 1.5 hrs. HL * 3* 5* 2x9W 12V HL * 7* 10* * Based on 9 watt lamps, standard 11 Page 1 of 1 Rev: 3/29/2019

12 Decorative Outdoor LED AC/Emergency Light Date: HLDBEL Mounting Surface mount via easy-connect back plate that fits most standard size junction boxes. Universal K/O pattern on back plate for wall mount. Threaded opening at the top of the enclosure for conduit mount. Illumination Long life, efficient, ultra bright white LED. 12W (2 LEDs x 6.0 watt) per unit. Mirror-bright reflector and prismatic polycarbonate refractor. Can be used as a Normally-ON or Normally-OFF light as well as on a switched circuit. Provides 1286 lumens in AC mode and 350 lumens in EM mode. Electrical Universal VAC voltage. Charge rate/power ON LED indicator light and push-to test switch for mandated code compliance testing. 4.8V long life, maintenance-free, rechargeable NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Self-diagnostic test feature continually diagnoses unit performance and tests system to ensure reliable operation and to meet electrical and life safety codes. Field-selectable wiring allows for AC operation of the unit to be controlled using a wall switch, a photocell, or any other switching mechanism. Photocell sensor included as a standard for use as dusk-to-dawn light. Housing Decorative, Low Profile, architectural design. Die-cast aluminum housing. Durable powder-coated finish. Sealed and gasketed. Certifications Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for wet locations (0 C 50 C). Options CW: Optional internal heater for extreme cold temperature applications (-30 C 50 C). Ordering Information Model Family Housing Color Options HLDBEL BR - Dark Bronze Blank - None CW - Cold Weather 6 9 /16 Sample Ordering Information Howard HLDBELB 12W volts Bronze Housing 3-5/8 Page 1 of 1 Rev: 3/1/

13 HLRMR-16W MR-16 Semi-Recessed Thermoplastic Emergency Unit Mounting Universal knockout pattern on back plate for surface mount. Snaps into place making internal electrical connections. Knockout for conduit applications. Housing Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in white. Illumination Two fully adjustable, semi-recessed ultra bright, 7.0 watt, MR-16 halogen lamp heads standard. High performance MR16 halogen lamps with smooth metallized reflector and glass lens for optimal light distribution. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. LVD (low voltage disconnect) prevents battery from deep discharge. 6V maintenance-free, rechargeable sealed lead acid battery. Internal solid-state transfer switch automatically connects the internal battery to lamp heads for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. 3 Warranty & Listings Five year warranty on all electronics and housing. Battery prorated for two years. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (20 C 40 C). Ordering Information Model Number Color Emergency Operations Number if Lamp Heads/Lamp Wattage Battery Voltage HLRMR-16 W: White 90+ minutes 2x 6V/7W 6V 13 Page 1 of 1 Rev: 3/1/2019

14 HL0202-BATT Rechargeable Sealed Lead Acid Battery Application For use with lighting equipment, communications and electrical equipment, emergency lighting equipment and fire alarm & security systems. Features Valve-regulated and safe to discharge in any position. Completely sealed and maintenance free, low selfdischarge. Impact-resistant ABS housing. Will last up to 5 years in standby applications and 200 to 1,000 cycles in cyclic applications depending on depth of discharge. Available in a variety of sizes and amp ratings. Provides reliable power output in a variety of applications, resulting in greater eff iciency and improved ability to recover from deep discharge. Cycle or standby use. Low resistance safety feature makes the batteries easy to recharge & maximizes energy output. Standard F1 or F2 f lat lugs type terminal. Ordering Information Model Number Nominal Voltage Nominal Current Weight (lbs) HL0202-BATT 6V 4.5 Amp-Hr 1.6 Page 1 of 1 Rev: 3/1/

15 HLRHLED LED Outdoor Polycarbonate / Die-cast Remote head Housing Available in both engineering grade, high-impact resistant polycarbonate or premium grade die-cast aluminum housing. Sealed and gasketed in standard gray or black finish. Warranty & Listings Five year warranty. UL Listed with approved Best Lighting Products. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. Fixture Compatability Illumination Long lasting, efficient, ultra bright white LED lamp heads. 1.0 watt (8 LEDs x watt) per head. High performance chrome-plated metalized reflector and plastic lens for optimal light distribution. Adjusta ble LED lamp heads provide optimal centertocenter spacing. HL0314 (click here) Electrical Powered from low voltage power source with low voltage wiring (not provided). 10 Mounting Universal mounting adapter plate included. Mounts to single-gang switch box. Distance of maximum run is determined by system voltage, wire gauge and total maximum wattage on the run. Suitable for wall or ceiling mount. 6 Ordering Information Model Weatherproof Number of Heads Housing Housing Color Lamp Type* HLRHLED1-PWP-CLPCXTE 1 Yes HLRHLED2-PWP-CLPCXTE 2 Polycarbonate Gray 8 LEDs 1W *Wattage rating stated per head. 15 Page 1 of 1 Rev: 3/5/2019

16 HLWG HLWG Series Exit/Emergency Wire Guards Features Durable 9-gauge steel construction. Mounting hardware provided for easy field installation. 6 HLWG1 Features Durable 9-gauge steel construction. Mounting hardware provided for easy field installation. HLWG Ordering Information Model Number For use with* HLWG1 Emergency Lights and Exit Signs 13.5 x 15 x 6 HLWG2 Combo Units 13 x 30 x 6 *Exceptions will apply, consult factory before ordering 16 Page 1 of 1 Rev: 3/1/2019

17 HL-BLEDEM-CP Constant-Power Emergency LED Driver Warranty & Listings UL Classified for factory or field installation. Suitable for damp locations (0 C - 50 C). 5 year warranty on all electronics and housing. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State codes. Illumination Provides constant power output to the load during emergency mode operation. Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD. Electrical Universal V, 50/60 Hz input. Charge/Power ON LED indicator light and push-to-test switch for mandated code compliance testing. Long-life, maintenance free, rechargeable NiCad battery. Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault. 90 Minute minimum emergency operating time over full temperature range (other run times available upon request). Output classification: Class 2 Compliant. Surge protection: Per C62.41 (TVS). Input overcurrent protection: Fusible link. 24 Hour maximum battery recharge time. Housing LED illuminated and remote mounted test switch. Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in a black finish. HL-BLEDEM-CP-800 HL-BLEDEM-CP-1200 & 1600 HL-BLEDEM-CP-2000 & 2400 Mounting Suitable for installation inside, on top, or in remote mount of the fixture. Ordering Information Model Output Operating Range Constant Output Power Voltage (Vdc) Current (madc) (Watts) (Lumens) HL-BLEDEM-CP HL-BLEDEM-CP HL-BLEDEM-CP HL-BLEDEM-CP HL-BLEDEM-CP Lumen output based on LED light source having efficacy of 160 lumens/watt. Actual output may vary depending on light source utilized. Provides regulated power from 5.0 watts to 17.0 watts (800 to 2400 lumens) 17 Page 1 of 2 Rev: 6/8/2018

18 HL-BLEDEM-CP BLEDEM-CP Series System Coordination Guidelines These guidelines were developed to allow the lighting system Designer/Specifier to predict the operating performance levels of LED luminaires when powered by an electrically compatible BLEDEM-CP Series model. It is ultimately the responsibility of the Designer/Specifier to insure that the as installed system delivers codecompliant path of egress illumination. 1) Determine Electrical Compatibility A) Verify that the Luminaire LED Driver, where applicable, is Class 2 compliant. B) Verify that the Luminaire LED Lamp(s) have an operating voltage between 20Vdc and 50Vdc. C) Verify that the Luminaire LED Lamp(s) have a power rating equal to, or greater than, the emergency power rating of the BLEDEM-CP model under consideration (please refer to Table 1). 2) Calculate Lumen Output During Emergency Operation A) Access luminaire data by logging onto Designlights Consortium ( B) Select Search the DLC Qualified Product List on the DLC homepage. C) Enter manufacturer name and P/N of luminaire under consideration in the search by keyword text window. D) Select Search tab to open the Qualified Products List. E) Determine luminaire Lumens per Watt efficacy in Rated Data specifications. F) Multiply luminaire Lumens per Watt by Emergency Output of the HL-BLEDEM-CP model under consideration (please refer to table 1). This figure is the Lumens available from the luminaire during emergency operation. 3) Determine Suitability of Means of Egress Lighting Levels Using industry standard lighting design software, along with IES files for the luminaire under consideration, verify that the as installed available Lumens (as calculated in 2F above) are sufficient to meet Code-compliant path of egress illumination levels. While the HL-BLEDEM-CP series has been found compliant with the requirements of UL Standard 924, it is ultimately the responsibility of the Designer/Specifier to assure the as-installed system delivers code-compliant path of egress illumination in accordance with Federal, State or local municipal requirements. Table 1 Model Output Power (constant) HL-BLEDEM-CP Watts HL-BLEDEM-CP Watts HL-BLEDEM-CP Watts HL-BLEDEM-CP Watts HL-BLEDEM-CP Watts Page 2 of 2 Rev: 6/8/

19 BAL3000TD Fluorescent Emergency Ballast 3000 Lumens Illumination Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one lamp in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 3000 lumens. Warranty & Listings Five year warranty against defects in material and workmanship (lamps excluded). Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 50 C). Suitable for use in sealed and gasketed fixtures. Lamp Compatibility Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts. Operates one or two T5, T5HO, T8, T12, T8HO, T12HO, Circular T5/T9, U-bend T8/T12, 4-Pin CFL and long CFL lamps in emergency mode. Refer to the chart on the next page for a complete list of compatible lamps. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 2.4v long life, maintenance-free, rechargeable sealed NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Time delay enhancement to overcome end-of-life circuitprotection. Mounting Suitable for installation inside, on top or in remote* of the fixture. Can be used in both switched and unswitched fixtures. UL Listed for factory or field installation Housing Durable painted steel construction in white finish. Provided with 2 flex conduit. * When battery packs are remote mounted, the remote distance cannot exceed ½ of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet. 19 Page 1 of 2 Rev: 10/27/2017

20 BAL3000TD Fluorescent Emergency Ballast 3000 Lumens Electrical Information CATALOG NUMBERI NPUT WATTS (W)I NPUT AMPS (A) BAL3000TD 120V 277V 120V 277V Lamp Compatibility Chart LAMP TYPEW ATTS INITIAL LUMENS 1-Lamp2 -Lamp T T T T T5HO T5HO T5HO T T T T T T8HO n /a T n /a T n /a T8HO n /a T T T LAMP TYPEW ATTS INITIAL LUMENS 1-Lamp2 -Lamp T T T n /a T n /a T12HO n /a T12HO n /a T12HO n /a T12HO n /a CFL G24q CFL G24q CFL G24q CFL G24q CFL G24q CFL G24q CFL G24q n /a CFL 2G CFL 2G CFL 2G CFL 2G CFL 2G LAMP TYPEW ATTS INITIAL LUMENS 1-Lamp2 -Lamp CFL 2G CFL 2G CFL 2G n /a CFL 2G n /a CFL GR10q CFL GR10q CFL GR10q CFL GR10q CFL GR10q CFL GR10q Circular T Circular T Circular T Circular T Circular T Circular T U-bend T U-bend T U-bend T NOTE: In 2-lamp operation, lumens are equally split between the two lamps. Page 2 of 2 Rev: 10/27/

21 BAL500 Fluorescent Emergency Ballast 500 Lumens Illumination Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one lamp in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 500 lumens. Warranty & Listings Five year warranty against defects in material and workmanship (lamps excluded). Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 50 C). Suitable for use in sealed and gasketed fixtures. Lamp Compatibility Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts. Operates one T5, T5HO, T8, T12, Circular T5/T9, U-bend T8/ T12, 4-Pin CFL and long CFL lamp in emergency mode. Refer to the chart on the next page for a complete list of compatible lamps. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 2.4v long life, maintenance-free, rechargeable sealed NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Time delay enhancement to overcome end-of-life circuitprotection. Mounting Suitable for installation inside, on top or in remote* of the fixture. Can be used in both switched and unswitched fixtures. UL Listed for factory or field installation Housing Durable painted steel construction in white finish. Compact design fits most fluorescent fixtures. * When battery packs are remote mounted, the remote distance cannot exceed ½ of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet. 21 Page 1 of 2 Rev: 03/21/2019

22 BAL500 Fluorescent Emergency Ballast 500 Lumens Electrical Information CATALOG NUMBERI NPUT WATTS (W)I NPUT AMPS (A) BAL500TD 120V 277V 120V 277V Lamp Compatibility Chart LAMP TYPE WATTS INITIAL LUMENS 1-Lamp T T T5HO T T LAMP TYPE WATTS INITIAL LUMENS 1-Lamp T T T T CFL 2G LAMP TYPE WATTS INITIAL LUMENS 1-Lamp Circular T Circular T Circular T U-Bend T U-Bend T Page 2 of 2 Rev: 03/21/2019

23 BAL700TD BAL700TD Fluorescent Emergency Ballast 700 Lumens Illumination Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one or two lamps in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 700 lumens. Warranty & Listings Five year warranty against defects in material and workmanship (lamps excluded). Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 50 C). Suitable for use in sealed and gasketed fixtures. Lamp Compatibility Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts. Operates one or two T5, T5HO, T8, T12, T8HO, T12HO, Circular T5/T9, U-bend T8/T12, 4-Pin CFL and long CFL amps in emergency mode. Refer to the chart on the next page for a complete list of compatible lamps. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 3.6V long life, maintenance-free, rechargeable sealed NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Time delay enhancement to overcome end-of-life circuitprotection. Mounting Suitable for installation inside, on top or in remote* of the fixture. Can be used in both switched and unswitched fixtures. UL Listed for factory or field installation Housing Durable painted steel construction in white finish. Compact design fits most fluorescent fixtures. * When battery packs are remote mounted, the remote distance cannot exceed ½ of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet. 23 Page 1 of 2 Rev: 10/27/2017

24 BAL700TD BAL700TD Fluorescent Emergency Ballast 700 Lumens Electrical Information CATALOG NUMBERI NPUT WATTS (W)I NPUT AMPS (A) BAL700TD 120V 277V 120V 277V Lamp Compatibility Chart LAMP TYPEW ATTS INITIAL LUMENS 1-Lamp2 -Lamp T T n /a T n /a T5HO n/a T5HO n/a T5HO n/a T T T T T8HO n/a T n /a T n /a LAMP TYPEW ATTS INITIAL LUMENS 1-Lamp2 -Lamp T8HO n /a T T T T T n/a T n/a T12HO n/a T12HO n /a CFL G24Q n /a CFL 2G CFL 2G n /a CFL 2G n /a LAMP TYPEW ATTS INITIAL LUMENS 1-Lamp2 -Lamp CFL 2G n /a CFL GR10q CFL GR10q n/a CFL GR10Q n /a Circular T Circular T Circular T n/a Circular T Circular T Circular T n/a U-bend T U-bend T U-bend T n /a NOTE: In 2-lamp operation, lumens are equally split between the two lamps. 24 Page 2 of 2 Rev: 10/27/2017

25 BALT5-1300TD Low Profile T5 Fluorescent Emergency Ballast 1300 Lumens Illumination Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one or two lamps in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 1300 lumens. Warranty & Listings Five year warranty against defects in material and workmanship (lamps excluded). Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 50 C). Suitable for use in sealed and gasketed fixtures. Lamp Compatibility Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts. Operates one or two T5, T5HO, T8, T12, Circular T5/T9, Ubend T8/T12, 4-Pin CFL and long CFL lamps in emergency mode. Refer to the chart on the next page for a complete list of compatible lamps. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 8.4V long life, maintenance-free, rechargeable sealed NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Time delay enhancement to overcome end-of-life circuitprotection. Mounting Suitable for installation inside, on top or in remote* of the fixture. Can be used in both switched and unswitched fixtures. UL Listed for factory or field installation Housing Low profile galvanized steel construction. Compact design fits most fluorescent fixtures. * When battery packs are remote mounted, the remote distance cannot exceed ½ of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet. 25 Page 1 of 2 Rev: 10/27/2017

26 BALT5-1300TD Low Profile T5 Fluorescent Emergency Ballast 1300 Lumens Electrical Information CATALOG NUMBERI NPUT WATTS (W)I NPUT AMPS (A) BALT5-1300TD 120V 277V 120V 277V Lamp Compatibility Chart LAMP TYPEW ATTS INITIAL LUMENS 1-Lamp2 -Lamp T T T n/a T n /a T5HO n/a T5HO n /a T5HO n /a T T T T n/a T n /a T n/a T n/a T n /a T n /a LAMP TYPEW ATTS INITIAL LUMENS 1-Lamp2 -Lamp CFL 2G n /a CFL 2G n /a CFL 2G n/a CFL 2G n/a CFL GR10q CFL GR10q n/a Circular T Circular T n/a Circular T n/a Circular T n/a Circular T n /a Circular T n /a U-bend T n/a U-bend T n/a U-bend T n /a U-bend T n /a NOTE: In 2-lamp operation, lumens are equally split between the two lamps. 26 Page 2 of 2 Rev: 10/27/2017

27 BALT5-500TD Low ProfileFluorescent Emergency Ballast 500 Lumens Warranty & Listings Five year warranty against defects in material and workmanship (lamps excluded). Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 50 C). Suitable for use in sealed and gasketed fixtures. Lamp Compatibility Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts. Operates one T5, T8, T12, Circular T5/T9 and U-bend T8/T12 lamp in emergency mode. Refer to the chart on the next page for a complete list of compatible lamps. Illumination Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one lamp in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 500 lumens. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 3.6V long life, maintenance-free, rechargeable sealed NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Time delay enhancement to overcome end-of-life circuitprotection. Mounting Suitable for installation inside, on top or in remote* of the fixture. Can be used in both switched and unswitched fixtures. UL Listed for factory or field installation Housing Low profile galvanized steel construction. Compact design fits most fluorescent fixtures. * When battery packs are remote mounted, the remote distance cannot exceed ½ of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet. 27 Page 1 of 2 Rev: 10/27/2017

28 BALT5-500TD Low ProfileFluorescent Emergency Ballast 500 Lumens Electrical Information CATALOG NUMBERI NPUT WATTS (W)I NPUT AMPS (A) BALT5-500TD 120V 277V 120V 277V Lamp Compatibility Chart LAMP TYPEW ATTS INITIAL LUMENS 1-Lamp2 -Lamp T n /a T n /a T n /a T n/a Circular T n/a Circular T n/a U-bend T n/a U-bend T n /a 28 Page 2 of 2 Rev: 10/27/2017

29 BALT5-800TD Low Profile T5 Fluorescent Emergency Ballast 800 Lumens Illumination Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one lamp in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 800 lumens. Warranty & Listings Five year warranty against defects in material and workmanship (lamps excluded). Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 50 C). Suitable for use in sealed and gasketed fixtures. Lamp Compatibility Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts. Operates one or two T5, T5HO, T8, T12, Circular T5/T9, Ubend T8/T12, 4-Pin CFL and long CFL lamps in emergency mode. Refer to the chart on the next page for a complete list of compatible lamps. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 6V long life, maintenance-free, rechargeable sealed NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Time delay enhancement to overcome end-of-life circuitprotection. Mounting Suitable for installation inside, on top or in remote* of the fixture. Can be used in both switched and unswitched fixtures. UL Listed for factory or field installation Housing Low profile galvanized steel construction. Compact design fits most fluorescent fixtures. * When battery packs are remote mounted, the remote distance cannot exceed ½ of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet. 29 Page 1 of 2 Rev: 10/27/2017

30 BALT5-800TD Low Profile T5 Fluorescent Emergency Ballast 800 Lumens Electrical Information CATALOG NUMBERI NPUT WATTS (W)I NPUT AMPS (A) BALT5-800TD 120V 277V 120V 277V Lamp Compatibility Chart LAMP TYPEW ATTS INITIAL LUMENS 1-Lamp2 -Lamp T n /a T n /a T n /a T5HO n/a T5HO n/a T5HO n/a T n /a T n /a T n /a T n/a CFL 2G n /a CFL 2G n /a LAMP TYPEW ATTS INITIAL LUMENS 1-Lamp2 -Lamp CFL 2G n /a CFL 2G n /a CFL GR10q CFL GR10q n /a Circular T n/a Circular T n/a Circular T n/a Circular T n/a Circular T n/a U-bend T n/a U-bend T n /a NOTE: In 2-lamp operation, lumens are equally split between the two lamps. Page 2 of 2 Rev: 10/27/

31 HL-PAC0006 Fluorescent Emergency Ballast 650 Lumens Illumination Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one lamp in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 750 lumens. Warranty & Listings Five year warranty against defects in material and workmanship (lamps excluded). Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 50 C). Suitable for use in sealed and gasketed fixtures. Lamp Compatibility Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts. Operates one 25W-40W T8 through T12, one 13W-42W 4-pin compact or one 18W-40W 4-pin long compact fluorescent lamps. Refer to lamp compatibility chart for a complete list of lamps. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 3.6V long life, maintenance-free, rechargeable sealed NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Time delay enhancement to overcome end-of-life circuitprotection. Mounting Suitable for installation inside, on top or in remote* of the fixture. Can be used in both switched and unswitched fixtures. UL Listed for factory or field installation. Housing Durable painted steel construction in white finish. Provided with 2 flex conduits on both ends. Compact design fits most fluorescent fixtures. 2 * When battery packs are remote mounted, the remote distance cannot exceed ½ of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet. 31 Page 1 of 2 Rev: 3/29/2019

32 HL-PAC0006 Fluorescent Emergency Ballast 650 Lumens Electrical Information CATALOG NUMBERI NPUT WATTS (W)I NPUT AMPS (A) 120V 277V 120V 277V BHL-PAC0006 AL650C-4ACTD Lamp Compatibility Chart LAMP INITIAL LUMENS 1-LAMP T8 32W 675 T12 40W Pin PL CF 13W Pin PL CF 18W 500 LAMP INITIAL LUMENS 1-LAMP 4-Pin PL CF 26W Pin PL CF 32W Pin PL CF 42W 750 LAMP INITIAL LUMENS 1-LAMP 4-Pin Long CF 18W Pin Long CF 24W Pin Long CF 36W Pin Long CF 40W Page 2 of 2 Rev: 3/29/2019

33 PAC0014 Fluorescent Emergency Ballast 1400 Lumens Illumination Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one lamp in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 1400 lumens. Warranty & Listings Five year warranty against defects in material and workmanship (lamps excluded). Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 50 C). Suitable for use in sealed and gasketed fixtures. Lamp Compatibility Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts. Operates one or two T5, T5HO, T8, T12, T8HO, T12HO, Circular T5/T9, U-bend T8/T12, 4-Pin CFL and long CFL lamps in emergency mode. Refer to the chart on the next page for a complete list of compatible lamps. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. 6v long life, maintenance-free, rechargeable sealed NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Time delay enhancement to overcome end-of-life circuitprotection. Mounting Suitable for installation inside, on top or in remote* of the fixture. Can be used in both switched and unswitched fixtures. UL Listed for factory or field installation Housing Durable painted steel construction in white finish. Compact design fits most fluorescent fixtures. * When battery packs are remote mounted, the remote distance cannot exceed ½ of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet. 33 Page 1 of 2 Rev: 3/21/2019

34 PAC0014 Fluorescent Emergency Ballast 1400 Lumens Electrical Information CATALOG NUMBERI NPUT WATTS (W)I NPUT AMPS (A) BPAC0014 AL1400TD 120V 277V 120V 277V Lamp Compatibility Chart 34 Page 2 of 2 Rev: 3/21/2019

35 BAL650C-2 Fluorescent Emergency Ballast 650 Lumens Warranty & Listings Five year warranty against defects in material and workmanship (lamps excluded). Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. UL Listed for damp locations (0 C 50 C). Suitable for use in sealed and gasketed fixtures. Lamp Compatibility Compatible with most one-, two-, three-, and four-lamp electronic standard and dimming AC ballasts. Operates one 13W-26W, 2-pin compact fluorescent lamps with GX23 and G24D bases. Refer to lamp compatibility chart for a complete list of lamps. Illumination Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one lamp in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 650 lumens. Electrical Dual 120/277 voltage. Charge rate/power ON LED indicator light and push-totest switch for mandated code compliance testing. Long life, maintenance-free, rechargeable sealed NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Time delay enhancement to overcome end-of-life circuitprotection. Mounting Suitable for installation inside, on top or in remote* of the fixture. Can be used in both switched and unswitched fixtures. UL Listed for factory or field installation. Housing Durable painted steel construction in white finish. Provided with 2 flex conduits on both ends. Compact design fits most fluorescent fixtures. * When battery packs are remote mounted, the remote distance cannot exceed ½ of the distance from ballast to lamp specified by the A.C. ballast manufacturer. The maximum allowable remote mounting distance is 50 feet. 2 NOTE: In 2-lamp operation, lumens are equally split between the two lamps. 35 Page 1 of 2 Rev: 10/27/2017

36 BAL650C-2 Fluorescent Emergency Ballast 650 Lumens Electrical Information BAL650C-2 CATALOG NUMBERI NPUT WATTS (W)I NPUT AMPS (A) 120V 277V 120V 277V Lamp Compatibility Chart LAMP INITIAL LUMENS 1-LAMP 2-Pin PL CF 13W Pin PL CF 18W Pin PL CF 26W Page 2 of 2 Rev: 10/27/2017

37 Notes 37

38 Notes 38

39 Notes 39

40 580 Eastview Drive Laurel, MS P.O. Box 1590 Laurel, MS general fax Revision Revision Date: Date: 10/3/2017 3/29/

TABLE OF CONTENTS. DLM LED Emergency Light DLH LED Remote Heads DLP Wet Location LED Emergency Light...25

TABLE OF CONTENTS. DLM LED Emergency Light DLH LED Remote Heads DLP Wet Location LED Emergency Light...25 ABOUT SIMKAR Simkar is a nationally known designer, developer, and manufacturer of innovative lighting solutions since 1952. We are committed to providing a diverse selection of high-quality LED lighting

More information

INSTRUCTION MANUAL IMPORTANT SAFEGUARDS. When using electrical equipment, basic safety precautions should always be followed, including the following:

INSTRUCTION MANUAL IMPORTANT SAFEGUARDS. When using electrical equipment, basic safety precautions should always be followed, including the following: ILB-CP20-HE-A TBTS HIGH EFFICIENCY EMERGENCY LIGHTING EQUIPMENT FOR LED INSTRUCTION MANUAL IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed, including

More information

ILB-CP TBTS A MOUNTING DESIGN EMERGENCY LIGHTING EQUIPMENT FOR LED

ILB-CP TBTS A MOUNTING DESIGN EMERGENCY LIGHTING EQUIPMENT FOR LED P.O. BOX 11846 TUCSON, AZ 85734 (520) 294-3292 FAX (520) 741-2837 www.iotaengineering.com INSTRUCTION MANUAL IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always

More information

IOTA Exit Signs. IOTA Emergency Fixtures

IOTA Exit Signs. IOTA Emergency Fixtures IOTA Exit Signs IOTA Exit Signs offer a variety of models to meet your interior egress requirements. IOTA Exit solutions are designed and manufactured for efficient, long-lasting performance, easy installation,

More information

ILB-CP TBTS A MOUNTING DESIGN EMERGENCY LIGHTING EQUIPMENT FOR LED

ILB-CP TBTS A MOUNTING DESIGN EMERGENCY LIGHTING EQUIPMENT FOR LED P.O. BOX 11846 TUCSON, AZ 85734 (520) 294-3292 FAX (520) 741-2837 www.iotaengineering.com ILB-CP TBTS A MOUNTING DESIGN EMERGENCY LIGHTING EQUIPMENT FOR LED Patented. See iotaengineering.com/patents for

More information

ILB-CP TBTS B MOUNTING DESIGN EMERGENCY LIGHTING EQUIPMENT FOR LED Patented. See iotaengineering.com/patents for more details

ILB-CP TBTS B MOUNTING DESIGN EMERGENCY LIGHTING EQUIPMENT FOR LED Patented. See iotaengineering.com/patents for more details P.O. BOX 11846 TUCSON, AZ 85734 (520) 294-3292 FAX (520) 741-2837 www.iotaengineering.com INSTRUCTION MANUAL IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always

More information

NYC Approved Product Series

NYC Approved Product Series NYC Approved Product Series ON THE PROJECT, ON THE SHELF, ON THE JOB NYC APPROVED Table of Contents NYC Approved LED Exit & Combo Series P. 2 NYC Approved LED Battery Series P. 3 NYC Approved Total Edge

More information

DISTRIBUTOR SELECT COLLECTION. EMERGI-LITE Full range of emergency lighting solutions

DISTRIBUTOR SELECT COLLECTION. EMERGI-LITE Full range of emergency lighting solutions COLLECTION EMERGI-LITE Full range of emergency lighting solutions Distributor Select products Popular emergency lighting products are in stock and ready to ship from warehouses across North America for

More information

The New Lux-Ray LED Emergency Lighting

The New Lux-Ray LED Emergency Lighting ON THE PROJECT, ON THE SHELF, ON THE JOB The New Lux-Ray LED Emergency Lighting RUGGED. VERSATILE. SOPHISTICATED MINIATURIZATION The New Lux-Ray LED Emergency Lighting For first-class performance in emergency

More information

PRODUCT OFFERING QUALITY VALUE VERSATILITY

PRODUCT OFFERING QUALITY VALUE VERSATILITY PRODUCT OFFERING QUALITY VALUE VERSATILITY LED FAMILY The Compass LED product series includes economical energy saving fixtures suitable for use in any commercial or light industrial application. Value

More information

Catalog Number. Notes. Type. FST Snap on frosted, diffuse L/LENS No diffuser

Catalog Number. Notes. Type. FST Snap on frosted, diffuse L/LENS No diffuser Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Built on the compact, low-profile Z strip channel, this LED strip offers long maintenance-free life, several color s, lumen outputs and lengths. Ideal

More information

Exit Signs, Emergency Lighting & Fluorescent Emergency Ballasts

Exit Signs, Emergency Lighting & Fluorescent Emergency Ballasts Exit Signs, Emergency Lighting & Fluorescent Emergency allasts rochure LEXLED SERIES ILLUMINATION Ultra-bright, long-life, energy effi cient red or green LED s. 1.2V long-life, maintenance-free, rechargeable

More information

Catalog Number. Notes

Catalog Number. Notes Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Built on the compact, low-profile Z strip channel, this LED strip offers long maintenance-free life, several color s, lumen outputs and lengths. Ideal

More information

LUCE 1 TL. specifications: internal. specifications: external. ordering logic. builder. Job/Location:

LUCE 1 TL. specifications: internal. specifications: external. ordering logic. builder. Job/Location: LUCE 1 TL indoor / damp Job/Location: Contractor: Prepared By: Job Type: Date: The LUCE-1TL thinline emergency ballast is designed to provide emergency illumination to existing or new fluorescent luminaires.

More information

Architectural / led luminaires

Architectural / led luminaires Introducing... An indoor/outdoor architecturally styled high performance LED Luminaire available with normally-on operation powered by line voltage, emergency operation powered by a Nickel-Cadmium battery

More information

Emergency Lighting. Product Guide LED. The right source for the. right light

Emergency Lighting. Product Guide LED. The right source for the. right light Emergency Lighting Product Guide LED The right source for the right light Contents Emergency Lighting Is Code-Required...... 2 Life Safety Code...4 Emergency Backup Options...6 LED Terminology..........................

More information

HIGH BAY APPLICATIONS

HIGH BAY APPLICATIONS STAIRWELLS The IIS Inverter can operate multiple fixtures in a building s stairwell and can be wired to bypass dimmers or occupancy sensors...keeping your egress corridors lit without sacrificing your

More information

Nightfall. led emergency egress lighting

Nightfall. led emergency egress lighting Nightfall led emergency egress lighting Nightfall led emergency egress lighting Combining a sleek, architectural, low profile design with high performance makes the Nightfall Series an attractive LED solution

More information

EarthTronics products. About us. Where efficiency meets innovation. T5 & T8 Linear. Founded in 2007, EarthTronics, Inc. is a Michigan based

EarthTronics products. About us. Where efficiency meets innovation. T5 & T8 Linear. Founded in 2007, EarthTronics, Inc. is a Michigan based LED Product Guide About us EarthTronics products We are dedicated to developing innovative energy efficient lighting products that provide a positive economic and environmental impact for our customers.

More information

CHINESE NEW YEAR DEADLINE SOLUTIONS

CHINESE NEW YEAR DEADLINE SOLUTIONS LED MADE-TO-ORDER CHINESE NEW YEAR DEADLINE SOLUTIONS Past the mid-october 17 large project deadline for deliveries required before April, 2018? Have an order between November and March and need it faster?

More information

Applications. Standard Materials

Applications. Standard Materials Mercmaster III Low Profile Compact Fluorescent Luminaires Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Applications Enclosed and gasketed fixtures

More information

Lights the way to safety SEVERE SERIES. Certified for Food Preparation and Cold Storage Applications. NEMA-4X Certified for Harsh Environments

Lights the way to safety SEVERE SERIES. Certified for Food Preparation and Cold Storage Applications. NEMA-4X Certified for Harsh Environments Lights the way to safety SEVERE SERIES Certified for Food Preparation and Cold Storage Applications NEMA-4X Certified for Harsh Environments TABLE OF CONTENTS NSF - WHAT & WHAY? SEVERE SERIES FAMILY 2

More information

Dimensions (111mm) 3 (76mm) (111mm) (48mm)

Dimensions (111mm) 3 (76mm) (111mm) (48mm) Catalog # : Project : Prepared By : Date : S2 The sleek architectural S is designed with tooless entry features saving time and money on installation. Optimizing Industry LED technology, the S series delivers

More information

SDL4 LED Strip Diffused Lens

SDL4 LED Strip Diffused Lens Catalog # : Project : Prepared By : Date : SDL4 The sleek architectural SDL is designed with tooless entry features saving time and money on installation. Optimizing industry leading LED technology, the

More information

CDL8 LED Architectural

CDL8 LED Architectural Project: Type: Model# CDL8 LED Architectural PRODUCT DESCRIPTION Retrofit Down lights The Luminoso 8 inch Commercial LED Downlight is damp rated, and suitable for 1-277V Input equipped with fire-rated

More information

BAS SDL8' LED Strip Diffused Lens

BAS SDL8' LED Strip Diffused Lens Project Name Fixture Type Catalog # BAS SDL8' The sleek architectural SDL is designed with tooless entry features saving time and money on installation. Optimizing industry leading LED technology, the

More information

Step-Dimming and/or 0-10v Dimming Drivers Electro Galvanized Steel Welded Construction. Photocell Sensor - On/Off Stainless Steel Fasteners Standard

Step-Dimming and/or 0-10v Dimming Drivers Electro Galvanized Steel Welded Construction. Photocell Sensor - On/Off Stainless Steel Fasteners Standard rev. 2//2 SECURITY - LED BCL1 SERIES Canopy, Stairwell & Passageway Luminaire The BCL1 series is a surface mounted luminaire designed for Stairwells, passageways, canopies, corridors, pedestrian tunnels

More information

Dimensions (111mm) (111mm) 3 (76mm)

Dimensions (111mm) (111mm) 3 (76mm) Catalog # : Project : Prepared By : Date : S8 The sleek architectural S is designed with tooless entry features saving time and money on installation. Optimizing industry leading LED technology, the series

More information

IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS. NXM Series - Survive-All. Emergency Light Unit

IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS. NXM Series - Survive-All. Emergency Light Unit Emergency Light Unit IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS 1. Do not

More information

MALIBU FM /2" N-Brushed Nickel. Nickel **ESTIMATED FROM LED SOURCE

MALIBU FM /2 N-Brushed Nickel. Nickel **ESTIMATED FROM LED SOURCE INDOOR LIGHTING Available in LED & Incandescent Direct/Indirect Light Ceiling Mount Only 3 Mounting Options UL Listed for Damp Locations SURFACE MOUNT MALIBU FM300 13 3/4" OPTIONAL MOUNTING KITS (sold

More information

Project. Comments. Prepared by. - EZ Hang feature facilitates fast - Prorated 5-year battery warranty - Overload / Short Circuit - NEC/OSHA

Project. Comments. Prepared by. - EZ Hang feature facilitates fast - Prorated 5-year battery warranty - Overload / Short Circuit - NEC/OSHA DESCRIPTION The Sure-Lites emergency series (SEL) is a UL 924 code compliant LED solution that provides from 25 feet to 60 feet of emergency egress coverage for a minimum of 90 minutes during a power outage.

More information

Millenium Os. Luminaire LED. For Stairwells and Public Spaces. Designed and manufactured in the USA. High Abuse Motion-Activated Lighting Product

Millenium Os. Luminaire LED. For Stairwells and Public Spaces. Designed and manufactured in the USA. High Abuse Motion-Activated Lighting Product Millenium Os For Stairwells and Public Spaces High Abuse Motion-Activated Lighting Product HA Designed and manufactured in the USA Occupancy Sensors Just Make Sense As industry standards continually change

More information

Pictogram Exit Signs Catalogue

Pictogram Exit Signs Catalogue Pictogram Exit Signs Catalogue Introducing new Pictogram Exit Signs To harmonize with existing international standards (ISO 7010 and ISO 3864-1), the National Building Code of Canada (NBC) released at

More information

NEMA-4X Series. Certified for Harsh Environment Applications

NEMA-4X Series. Certified for Harsh Environment Applications NEMA-4X Series Certified for Harsh Environment Applications NEMA-4X Family The industry standard for emergency lighting in harsh environments is here. Battery units, remote fixtures, exit signage and combination

More information

VIENTO MEDIUM AREA & SITE LED LUMINAIRE OPTICS

VIENTO MEDIUM AREA & SITE LED LUMINAIRE OPTICS PROJECT INFORMATION Project Name Date VIENTO MEDIUM Catalog # APPLICATIONS Auto Dealership Sales Lots Parking Lots Educational/Business Campuses Type Parks & Recreation Areas Security Areas Mall & Retail

More information

FHSAC1-UNV-40L INSTALLATION INSTRUCTIONS

FHSAC1-UNV-40L INSTALLATION INSTRUCTIONS LED Driver with integrated emergency backup Universal Voltage: 120-277V ~, 50/60Hz Output Wattage: 40W Max. Output Current: 250-1400mA Linear Case with side leads Output voltage range of 11-55V This Driver

More information

SECTION INTERIOR LIGHTING

SECTION INTERIOR LIGHTING SECTION 26 51 00 INTERIOR LIGHTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

I-320 SERIES AC EMERGENCY LIGHTING EQUIPMENT

I-320 SERIES AC EMERGENCY LIGHTING EQUIPMENT P.O. BOX 84 TUCSON, AZ 85734 (520) 294-3292 FAX (520) 74-2837 www.iotaengineering.com INSTRUCTION MANUAL IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be

More information

Distributor Select LED Families

Distributor Select LED Families Distributor Select LED Families Low energy and low maintenance for moderate budget application ON THE PROJECT, ON THE SHELF, ON THE JOB MICRO LED Family EL-2LED Series ELXN400 LED Series EF43 & EF44D Series

More information

PSO Business Rebates Retrofit Lighting Technical Requirements

PSO Business Rebates Retrofit Lighting Technical Requirements PSO Business Rebates Retrofit Lighting General LED Requirements LED replacement and LED luminaires must be listed on the Design Lights Consortium (DLC) or ENERGY STAR Qualified Products List (QPL). DLC

More information

LED RETROFIT CONVERSION KITS

LED RETROFIT CONVERSION KITS Our LED RetroFit Conversion Kits come with a complete Gear Tray Assembly to convert older 4-foot and 8-foot T8 or T12 strip-type fixtures into energy efficient LED luminaires. High quality components and

More information

UltraLITE Model ELU Centralized Emergency Lighting Inverter 4.2 KW- 5 KW

UltraLITE Model ELU Centralized Emergency Lighting Inverter 4.2 KW- 5 KW 12/23/16 Rev 9 UltraLITE Model ELU General Specification 4.2 KW to 5 KW UltraLITE Model ELU Centralized Emergency Lighting Inverter 4.2 KW- 5 KW 1.0 General General Specification This specification describes

More information

New LED Product Offerings

New LED Product Offerings New LED Product Offerings from we know light. TCP LED NEW Product Offerings LED Indoor Lighting PL Lamps EdgeLit Downlights HID DirecT8/DirecT5 T8/T5 Tubes Liscio by TCP Linear Accent Lighting Luxterior

More information

SECTION LIGHTING

SECTION LIGHTING SECTION 26 50 00 LIGHTING PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and required to furnish and install

More information

Grüv Flare Regressed. Recessed Linear LED

Grüv Flare Regressed. Recessed Linear LED Grüv Flare Regressed Features The Gruv Flare Regressed fixture provides high-performance, visually comfortable, high efficient ambient lighting. Designed with a regressed lens and a flared aperture, the

More information

RES West Coast Valued Partner Meeting September 27, 2018 Joe Calnan RES National Account Manager

RES West Coast Valued Partner Meeting September 27, 2018 Joe Calnan RES National Account Manager www.sylvania.com RES West Coast Valued Partner Meeting September 27, 2018 Joe Calnan RES National Account Manager LED Lamps New Portfolio Additions - 2018 10YV Colored Lamps Motion Sensor Lamps Vintage

More information

LED RETROFIT SOLUTIONS

LED RETROFIT SOLUTIONS The adoption of LED technology for general illumination systems is considered the attractive choice when compared against traditional linear fluorescent lamps. Engineered Products Company (EPCO) LED RetroFit

More information

BAS SFP22 Edge-lit LED Panel

BAS SFP22 Edge-lit LED Panel Project Name Fixture Type Catalog # BAS SFP22 The ultra-thin, edge-lit LED panel (BAS SFP22) series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices,

More information

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 26 ELECTRICAL

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 26 ELECTRICAL SECTION 265100 - INTERIOR LIGHTING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Interior lighting fixtures, lamps, and ballasts. 2. Emergency lighting units. 3. Exit signs. 4.

More information

Grüv Flare Regressed. Recessed Linear LED

Grüv Flare Regressed. Recessed Linear LED Grüv Flare Regressed Features The Gruv Flare Regressed fixture provides high-performance, visually comfortable, high efficient ambient lighting. Designed with a regressed lens and a flared aperture, the

More information

IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 3LERHZ Series Class I, Div 2 Combo Unit. Installation instructions

IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 3LERHZ Series Class I, Div 2 Combo Unit. Installation instructions 3LERHZ Series Class I, Div 2 Combo Unit Installation instructions 3LERHZ Series Class I, Div 2 Combo Unit IMPORTANT SAFEGUARDS 1 3 When using electrical equipment, basic safety precautions should always

More information

Metalux SWLED LED. Type. Catalog # Project. Date. Comments. Prepared by

Metalux SWLED LED. Type. Catalog # Project. Date. Comments. Prepared by DESCRIPTION is a versatile LED surface or wall mount luminaire which can be used in a broad range of commercial and industrial applications. This series provides customers with a high quality luminaire

More information

SECTION INTERIOR LIGHTING

SECTION INTERIOR LIGHTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the

More information

TROFFER RETROFIT KIT (TRK)

TROFFER RETROFIT KIT (TRK) Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/qpl. TROFFER RETROFIT KIT (TRK) www.trulygreensolutions.com

More information

THE UNITED LIGHTING GROUP

THE UNITED LIGHTING GROUP Apartment Lights pp. 02-11 Common Spaces pp. 12-21 Utility & Exits... pp. 22-27 Exterior Lights pp. 28-30 THE UNITED LIGHTING GROUP www.ulgroupusa.com Support@ULGroupUSA.com Apt Hall / Foyer [ceiling surface]

More information

DHL-LP-LED Low Profile LED Linear High/Low Bay

DHL-LP-LED Low Profile LED Linear High/Low Bay Job Information Type: Catalog #: Project: Comments: Prepared by: WARRANTY WARRANTY YEAR TEN INCLUDES LABOR ALLOWANCE 2 65W/90W Version 23.81 2 135W Version For 4 dimensions see pg 2 23.81 23.81 23.81 12.6

More information

LED FIXTURE CATALOG. Shining light into the future

LED FIXTURE CATALOG. Shining light into the future LED FIXTURE CATALOG Shining light into the future Company Profile Ohyama Lights, LLC strives to be an innovative company that is responsive to its customers needs. Our mission is to put the customer first

More information

LiteMinder. LM Series Inverter Pure Sine Wave Modular Inverter Technology. Fast Transfer System 1.0 to 18.75KVA LED Compatible

LiteMinder. LM Series Inverter Pure Sine Wave Modular Inverter Technology. Fast Transfer System 1.0 to 18.75KVA LED Compatible LiteMinder Fast Transfer System 1.0 to 18.75KVA LED Compatible Series Pure Sine Wave Modular Technology Modular AC System Evenlite s LiteMinder Central System provides an innovative Emergency Lighting

More information

Bdl60u Fluorescent Emergency Ballast

Bdl60u Fluorescent Emergency Ballast A Division Of Philips Electronics North America Corporation One- or two-lamp emergency; Universal input voltage: 120 through 277 V, 50 or 60 Hz; Replaces B60U Bdl60u Fluorescent Emergency Ballast Product

More information

Sure-Lites. 13" [330mm] 3 1/8" [80mm] 4 3/4" [121mm] Emergency Light w/remote Capacity SEL SERIES

Sure-Lites. 13 [330mm] 3 1/8 [80mm] 4 3/4 [121mm] Emergency Light w/remote Capacity SEL SERIES DESCRIPTION The Sure-Lites Emergency Light SEL series is a UL924 code compliant solution designed to run for a minimum of 90 minutes during a outage. Key features of the series include: a nickel cadmium

More information

LED lighting for light industrial areas IHB series high bay LED luminaires. IHB series. High bay LED luminaires for light industrial areas

LED lighting for light industrial areas IHB series high bay LED luminaires. IHB series. High bay LED luminaires for light industrial areas LED lighting for light industrial areas IHB series high bay LED luminaires IHB series High bay LED luminaires for light industrial areas IHB series high bay LEDs Safe. Reliable. Efficient. Featuring the

More information

Hazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2

Hazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2 Hazardous Location LED String Lights - 5 Jelly Jar Lamps - Non Metallic - Chemical Resistant - CID2 Part #: HAL-SL-5-LED Page: 1 Made in Texas The Larson Electronics HAL-SL-5-LED Explosion Proof LED String

More information

A REA L IGHTING A DIFFERENT WAY OF LIGHT

A REA L IGHTING A DIFFERENT WAY OF LIGHT A REA L IGHTING Venture Lighting is a worldwide innovator, manufacturer and supplier of energy efficient lighting materials, components, systems, fixtures and controls. Since being founded in 1983 and

More information

TRMUNV220ACXXXA UNIVERSAL VOLTAGE HIGHBAY RETROFIT KIT

TRMUNV220ACXXXA UNIVERSAL VOLTAGE HIGHBAY RETROFIT KIT UNIVERSAL VOLTAGE HIGHBAY RETROFIT KIT Retrofit Kit Suitable for Acrylic Highbays and Lowbays Suitable replacement for applications using 400W HID Instant ON/Off, no cool down time needed 120277V Application

More information

Step Lighting. For indoor and outdoor, stair and pathway applications. Juno Lighting Group Juno Step Lighting 1

Step Lighting. For indoor and outdoor, stair and pathway applications. Juno Lighting Group Juno Step Lighting 1 Step Lighting For indoor and outdoor, stair and pathway applications Juno Lighting Group Juno Step Lighting 1 Lighting your way Table of Contents Mini LED Step Lights p. 4-9 Performance LED Step Lights

More information

Project. Comments. Prepared by

Project. Comments. Prepared by DESCRIPTION The Sure-Lites Emergency Light SELM series is a UL924 code compliant solution designed to run for a minimum of 90 minutes during a outage. Key features of the series include: a nickel cadmium

More information

Hazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs

Hazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs Hazardous Location LED Pivoting Light - C1D2 - Dimmable - Modbus TCP/IP Network - Meets USCG Specs Part #: HALP-ANC-48-2L-LED-D-V2 Page: 1 Made in the USA The Larson Electronics HALP-ANC-48-2L-LED-D-V2

More information

Lighting Solutions. from a Leader in Light Source Technology

Lighting Solutions. from a Leader in Light Source Technology Lighting Solutions from a Leader in Light Source Technology About Venture Lighting Venture Lighting International, an Advanced Lighting company, was founded in 1983 as a metal halide, high intensity discharge

More information

Alliance 4 - ALI4 LED 4 Linear High Bay

Alliance 4 - ALI4 LED 4 Linear High Bay Catalog # : Project : Prepared By : Date : Alliance 4 - ALI4 The new Alliance indoor LED high bay was designed to provide flexibility on any project. For use with applications ranging from school gymnasiums

More information

UNIFIED FACILITIES GUIDE SPECIFICATIONS

UNIFIED FACILITIES GUIDE SPECIFICATIONS USACE / NAVFAC / AFCEC / NASA UFGS-26 52 00.00 40 (November 2017) ----------------------------------- Preparing Activity: NASA Superseding UFGS-26 52 00.00 40 (August 2014) UNIFIED FACILITIES GUIDE SPECIFICATIONS

More information

80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup

80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup 80W C1D2 Hazardous Location Integrated LED - Corrosion Resistant for Marine - Emergency Backup Part #: HALP-EMG-48-2L-ITG-LED-V2 Page: 1 Made in Texas The Larson Electronics HALP-EMG-48-2L-ITG-LED-V2 Hazardous

More information

LED Family Series. Low energy and low maintenance for moderate budget application LIFE SAFETY EQUIPMENT

LED Family Series. Low energy and low maintenance for moderate budget application LIFE SAFETY EQUIPMENT Lights the way to safety LED Family Series Low energy and low maintenance for moderate budget application LIFE SAFETY EQUIPMENT Cluster LED Family LCA-LEDR Series UQLXN500-LED Series ELF65D Series FEATURES

More information

CPPG ENERGY EFFICIENT CANOPY LIGHTS FOR PARKING AREAS

CPPG ENERGY EFFICIENT CANOPY LIGHTS FOR PARKING AREAS ENERGY EFFICIENT CANOPY LIGHTS FOR PARKING AREAS ENERGY EFFICIENT CANOPY LIGHTS FOR PARKING AREAS PROJECT TYPE YEAR WARRANT Y Prodigy's canopy lights offer a unique combination of energy efficiency, reliability

More information

THE COMPLETE GUIDE TO OUTDOOR WALL LIGHTS

THE COMPLETE GUIDE TO OUTDOOR WALL LIGHTS THE COMPLETE GUIDE TO OUTDOOR WALL LIGHTS CONTENTS 1. INTRODUCTION 2. TYPES OF OUTDOOR WALL LIGHTS 3. LIGHT SOURCES IN OUTDOOR WALL LIGHTS 4. FACTORS IN SELECTING OUTDOOR WALL LIGHTS 5. SUMMARY lighting

More information

Parking Garage. Lighting & Control Solutions SLGUS.COM

Parking Garage. Lighting & Control Solutions SLGUS.COM Parking Garage Lighting & Control Solutions SLGUS.COM Does your parking facility feel comfortable for drivers & pedestrians? At SLG we can provide a solution that will help your facility feel more safer,

More information

LUMINAIRE ID SIZE CENTER OPTICS SIDE OPTICS LIGHT SOURCE CRI LUMEN PACKAGES COLOR TEMP. VOLTAGE. LED - high performance LED 80-80CRI 90-90CRI

LUMINAIRE ID SIZE CENTER OPTICS SIDE OPTICS LIGHT SOURCE CRI LUMEN PACKAGES COLOR TEMP. VOLTAGE. LED - high performance LED 80-80CRI 90-90CRI PROJECT: APPROVED BY: SIGNATURE: Grid - shown with a Nova flat lens Grid - shown with a Nova Slope lens TYPE QTY DESCRIPTION Nova is an efficient architectural LED troffer with a distinctive luminous shielding

More information

IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS. HZM-Series-Class I, Div 2 Battery Unit. Instalation instructions

IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS. HZM-Series-Class I, Div 2 Battery Unit. Instalation instructions HZM-Series-Class I, Div 2 Battery Unit HZM-Series-Class I, Div 2 Battery Unit Instalation instructions IMPORTANT SAFEGUARDS 1 4 5 6 7 13 When using electrical equipment, basic safety precautions should

More information

Evolve LED Garage Light

Evolve LED Garage Light GE Lighting Evolve LED Garage Light (EG2R) imagination at work Product Features High quality lighting meets long life and controllability with the Evolve LED Garage Light, EG2R. This fixture features an

More information

CONTENTS LITHONIA EMERGENCY SYSTEMS

CONTENTS LITHONIA EMERGENCY SYSTEMS CONTENTS EXIT SIGNS Architectural... 442-443 Specifi cation... 444-446 General Purpose...447 Specialty... 448-450 Accessories...450 Contractor Select Stock...466 EXIT-UNIT COMBOS General Purpose...451

More information

LED RETROFIT CONVERSION KITS

LED RETROFIT CONVERSION KITS Engineered Products Company s LED RetroFit Conversion Kits convert older 4-foot and 8-foot T8 or T12 strip-type fixtures into energy efficient LED luminaires. High quality components and attractive design

More information

Essentials Series 4.0

Essentials Series 4.0 Essentials Series 4.0 LED High Bay Essentials Series 4.0 provides the highest quality, reliability and performance with extraordinary lumen maintenance and efficacy, delivering superior ROI for your application.

More information

LHB LED High Bay. Technical Specifications. Description. Performance Data. Dimensions & Weights. Delivered Lumens Efficacy.

LHB LED High Bay. Technical Specifications. Description. Performance Data. Dimensions & Weights. Delivered Lumens Efficacy. Technical Specifications Description The High Bay luminaire delivers the illumination performance to replace up to a 400W HID fixture one-for-one. Lumecon s unique High Bay design makes this fixture an

More information

LED HIGH BAY LINEAR HL SERIES

LED HIGH BAY LINEAR HL SERIES PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 7 LED HIGH BAY LINEAR PRODUCT DESCRIPTION: The LED Linear Highbay Series offers leading-edge efficacy and scalability for high ceiling

More information

Outdoor Emergency Lighting Application Guide

Outdoor Emergency Lighting Application Guide Outdoor Emergency Lighting Application Guide www.lithonia.com/outdooremergency Outdoor Emergency Lighting Application Guide Table of Contents: Subject Page Introduction... 1 Power Sources... 2 Normally

More information

POINT HELIDECK LIGHTS PRL-LSM LED LOW SURFACE MOUNT LIGHT

POINT HELIDECK LIGHTS PRL-LSM LED LOW SURFACE MOUNT LIGHT Compliances: ETL Listed to UL 98 US & CSA C22.2 No..-4 Canada ETL Listed to UL 98A Marine Vessels IMO 9 MODU Code () paragraph 13.. FAA AC /39-2B Heliport Design Guide ICAO Annex 14, Volume II UK CAA CAP

More information

Truss Surface SURFACE

Truss Surface SURFACE Overview Realistic steel truss in aluminum One piece extruded aluminum housing with integral driver Direct light only Continuous row mounting; standard Can also be specified as pendant or surface wall

More information

THE HIGH STAIRWELL AND PASSAGEWAY FIXTURE PERFORMANCE KEY FEATURES INCLUDE:

THE HIGH STAIRWELL AND PASSAGEWAY FIXTURE PERFORMANCE KEY FEATURES INCLUDE: THE HIGH PERFORMANCE LED Luminaire Series for Stairwells, Bathrooms, Passageways, and General Illumination KEY FEATURES INCLUDE: Multiple Color Options Three color options ensure that the new lighting

More information

But act fast: your order must be received by December 21st and ship by December 28th. Order quantity limited to supply in stock.

But act fast: your order must be received by December 21st and ship by December 28th. Order quantity limited to supply in stock. www.fulham.com For a limited time, Fulham is offering a 10% discount on a wide range of products. View the full product list on the following pages, then contact your RSM or email us at order@fulham.com

More information

Surface Mount Series Luminaires

Surface Mount Series Luminaires Surface Mount Series Luminaires Product Family Overview Surface Mount SURFACER1A/025120T827/14S/WH Specifications UNV Wattage: 16W, 25W Dimensions: 11 Diameter 14 Diameter Lumens: Up to 1600 lm CCT: 2700K,

More information

MN/DOT Specification Sign Lighting Luminaire With 150 or 250 Watt Metal Halide Lamps 11/05/09

MN/DOT Specification Sign Lighting Luminaire With 150 or 250 Watt Metal Halide Lamps 11/05/09 1. LISTING REQUIREMENTS MN/DOT Specification Sign Lighting Luminaire With 150 or 250 Watt Metal Halide Lamps 11/05/09 1.1. The Luminaire shall be listed by a National Recognized Testing Laboratory (NRTL)

More information

CALIBER LIGHTING. SERIES 4VDWWL Shower Lens LED Dim-to-Warm Recessed Downlight, 1018 Lumen APPLICATION PRODUCT DATA. 4VLEDWL Example: 4VLEDWLSCLPF

CALIBER LIGHTING. SERIES 4VDWWL Shower Lens LED Dim-to-Warm Recessed Downlight, 1018 Lumen APPLICATION PRODUCT DATA. 4VLEDWL Example: 4VLEDWLSCLPF APPLICATION Small aperture medium distribution downlight is suitable for applications that require a dim-to-warm long life LED lamp source and a lensed wet location reflector. PRODUCT DATA LED MODULE:

More information

EVT4 Series. LED & Fluorescent Technology

EVT4 Series. LED & Fluorescent Technology EVT4 Series LED & Fluorescent Technology HOLOPHANE EVT4 Series THE EVT4 SERIES SLEEK, IMPACT-RESISTANT HOUSING IS IDEAL FOR A WIDE-RANGE OF INDUSTRIAL APPLICATIONS. AVAILABLE IN FLUORESCENT AND LED TECHNOLOGY,

More information

110 lm w STANDARD SERIES

110 lm w STANDARD SERIES ASD LED Bullet Flood light uses the latest in solid state lighting technology for high efficiency, long life and low maintenance. It s good for facade, landscape and sign lighting applications. Our LED

More information

LMV Series W Low Profile - Medium Base

LMV Series W Low Profile - Medium Base L LMV Series 50-150W Low Profile - Medium Base Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G;

More information

Introduction. Emergency Systems Synergy Control Systems. Lithonia Emergency Systems E3 - E16 Lithonia Synergy Control SS1 - SS9.

Introduction. Emergency Systems Synergy Control Systems. Lithonia Emergency Systems E3 - E16 Lithonia Synergy Control SS1 - SS9. Introduction Emergency Systems Synergy Control Systems { Systems Lithonia Emergency Systems E3 - E16 Lithonia Synergy Control SS1 - SS9 EMERGENCY SYSTEMS Emergency lighting is required by building codes

More information

Fino Healthcare. Asymmetric Wall Mount Indirect LED

Fino Healthcare. Asymmetric Wall Mount Indirect LED Fino Healthcare Asymmetric Wall Mount Indirect LED Features fiture is ideal for applications requiring a wipe down lens with no horizontal "shelf" surfaces. Designed with an integrated acrylic lens to

More information

GREENLITE.CA ACT.NOW.FOREVER GREENLITEUSA.COM 2018 LIGHTING PRODUCT CATALOG GREENLITEUSA.COM

GREENLITE.CA ACT.NOW.FOREVER GREENLITEUSA.COM 2018 LIGHTING PRODUCT CATALOG GREENLITEUSA.COM GREENLITE.CA ACT.NOW.FOREVER GREENLITEUSA.COM 2018 LIGHTING PRODUCT CATALOG GREENLITEUSA.COM ACT.NOW.FOREVER 2018 LIGHTING PRODUCT CATALOG 4-7 8-9 10-20 21-23 24 25-27 Our Story Our Technology LED Bulbs

More information

BALLAST SOURCE EB- Electronic ballast BALLAST QUANTITY. 1-(1) 4-light ballast LAMP SPECIFICATIONS SPECIFICATIONS

BALLAST SOURCE EB- Electronic ballast BALLAST QUANTITY. 1-(1) 4-light ballast LAMP SPECIFICATIONS SPECIFICATIONS CATALOG NO. TYPE NO. JOB NAME SmarT-Bay 4-Light T8 ORDERING INFORMATION Catalog Number: Example: SBN432EB1-4JP SB N 4 32 EB 1 FIXTURE SB- SmarT- Bay Series Industrials BODY WIDTH N- Narrow (4 Light) LAMPS

More information

Product Catalogue. Specialist in Emergency Lighting and Exit Sign

Product Catalogue. Specialist in Emergency Lighting and Exit Sign Product Catalogue Denko Lighting Pte Ltd Blk 5004, Ang Mo Kio Ave 5 #05-10/11, Techplace II Singapore 569872 Tel: 6483 2325 Fax: 6483 2438 Email: sales@denkolighting.com.sg Website: www.denkolighting.com.sg

More information

A. Furnish and install luminaires, lamps, ballasts and in-line fuses as herein specified and shown on the Drawings.

A. Furnish and install luminaires, lamps, ballasts and in-line fuses as herein specified and shown on the Drawings. DIVISION 26 ELECTRICAL SECTION 26 51 13 PART 1 GENERAL 1.01 DESCRIPTION A. Furnish and install luminaires, lamps, ballasts and in-line fuses as herein specified and shown on the Drawings. B. Luminaire

More information