Implementation of the Eurocodes in Croatia
|
|
|
- Joshua Spencer
- 5 years ago
- Views:
Transcription
1 The way forward for the Eurocodes implementation in the Balkans October 2018, Tirana Implementation of the Eurocodes in Croatia Vlasta Gaćeša-Morić Croatian Standards Institute (HZN)
2 Croatian Standards Institute (HZN) National Standards Body public institution Law on Standardization (NN 80/2013) Decree of the Government of the Republic of Croatia on the establishment of the Croatian Standards Institute (NN 154/2004; NN 44/2005; NN 30/2010; NN 34/2012; NN 79/2012) HZN became a full member of CEN&CENELEC Croatia became a member of EU
3 Adoption and Implementation of the Eurocodes Croatian approach (1) Agreement on Cooperation in the Process of Adoption of the Eurocodes as Croatian Standards signed on by Ministry of Construction and Physical Planning, Croatian Chamber of Civil Engineers and Croatian Standards Institute
4 Adoption and Implementation of the Eurocodes Croatian approach (2) Agreement on Cooperation in the Process of Adoption of the Eurocodes as Croatian Standards Work Plan on Adoption of the Eurocodes as Croatian Standards for the Period annual bilateral contracts
5 Work Plan on Adoption of the Eurocodes (1)
6 Work Plan on Adoption of the Eurocodes (2) Work Plan was not realized on time for various reasons: lack of awareness at the high management level insufficient capacities (human resources) difficulties with reaching consensus on certain NDPs time consuming work on new maps for actions on structures and seismic impact completion was postponed several times
7 HZN/TO 548, Structural Eurocodes (1) NMC to CEN/TC 250 established chairman: Prof. Ivica Džeba PhD., CEng. structure based on the structure of CEN/TC SCs 3 WGs conditions for organized and planned work on all Eurocodes within single TC provided 137 experts from different institutions/firms are involved
8 HZN/TO 548, Structural Eurocodes (2) decisions: ENs to be adopted in original (en) immediately adoption to be followed by translation into Croatian NAs to be developed & published as soon as possible NAs to be published as separate documents
9 HZN/TO 548, Structural Eurocodes (3) SCs PO 1, Eurocode 1: Actions on structures PO 2, Eurocode 2: Design of concrete structures PO 3, Eurocode 3: Design of steel structures PO 4, Eurocode 4: Design of composite steel and concrete structures PO 5, Eurocode 5: Design of timber structures PO 6, Eurocode 6: Design of masonry structures PO 7, Eurocode 7: Geotechnical design PO 8, Eurocode 8: Earthquake resistance design of structures PO 9, Eurocode 9: Design of aluminium structures
10 HZN/TO 548, Structural Eurocodes (4) WGs RS 1, Translation RS 2, National Annexes RS 3, Eurocode 0 (not active any more)
11 HZN/TO 548, Structural Eurocodes (5) new SCs ( ) PO 10, EN 1990 Basis of structural design PO 11, Structural Glass
12 Eurocodes ENs in Croatia (1) 1 st edition HRN EN 1990:2008 en HRN EN 1991:2008 en HRN EN 1992:2008 en HRN EN 1993:2008 en HRN EN 1994:2008 en HRN EN 1995:2008 en HRN EN 1996:2008 en HRN EN 1997:2008 en HRN EN 1998:2008 en HRN EN 1999:2008 en (with all corresponding amendments and corrigenda)
13 Eurocodes ENs in Croatia (2) 2 nd edition HRN EN 1990:2011 hr HRN EN 1991:2012 hr HRN EN 1992:2013 hr HRN EN 1993:2014 hr HRN EN 1994:2012 hr HRN EN 1995:2013 hr HRN EN 1996:2012 hr HRN EN 1997:2012 hr HRN EN 1998:2011 hr HRN EN 1999:2015 hr (consolidated with all published amendments and corrigenda)
14 Eurocodes ENs in Croatia (3) problems hr versions consolidated with amendments and corrigenda published before publishing HRNs user-friendly, but new amendments and corrigenda published after the publication of consolidated versions "never-ending story" capacity to carry out the work on time (translation, consolidation, possible modifications of NAs) publication of separate documents adopting new As & ACs not transparent enough?
15 Eurocodes ENs in Croatia (4) new documents publication of new documents continued numerous amendments (14) EN 1991 (2), EN 1992 (2), EN 1993 (6), EN 1994 (1), EN 1995 (1), EN 1997 (1), EN 1998 (1) new standards EN :2018 all published amendments translated into Croatian and published as separate documents
16 Eurocodes NAs in Croatia (1) HRN EN 1990:2011/NA:2011 hr-en HRN EN 1991:2012/NA:2012 hr-en HRN EN 1992:2013/NA:2013 hr-en HRN EN 1993:2014/NA:2014 hr-en HRN EN 1994:2012/NA:2012 hr-en HRN EN 1995:2013/NA:2013 hr-en HRN EN 1996:2012/NA:2012 hr-en HRN EN 1997:2012/NA:2012 hr-en HRN EN 1998:2011/NA:2011 hr-en HRN EN 1999:2015/NA:2015 hr-en (57 parts)
17 Eurocodes NAs in Croatia (2) exception: HRN EN 1997:2012/NA not published (not aware that it had to be) more formality than a need working draft nrhrn EN /NA prepared not convinced it is necessary use of other national procedures except form the nrhrn EN are allowed in Croatia, Annexes A to X remain informative HZN/TO 548 will decide about the publication
18 Eurocodes NAs in Croatia (3) new maps for actions on structure (based on 30 years period ): snow load map (HRN EN /NA) basic wind velocity map (HRN EN /NA) air temperature maps (HRN EN /NA) (made by Croatian Meteorological and Hydrological Service)
19 Eurocodes NAs in Croatia (4) Map of snow areas
20 Eurocodes NAs in Croatia (5) Fundamental value of the basic wind velocity ν b,0
21 Eurocodes NAs in Croatia (6) Map of maximum/minimum shade air temperatures
22 Eurocodes NAs in Croatia (7) new maps for seismic impact reference peak ground acceleration: reference return period 475 years reference return period 95 years (made by University of Zagreb, Faculty of Science, Department of Geophysics)
23 Eurocodes NAs in Croatia (8) Seismic zone map for peak ground acceleration for return period T NCR =475/T DLR =95 years
24 Eurocodes NAs in Croatia (9) Proportion of accepted recommended values of NDPs Eurocode NDPs accepted [%] EN EN EN EN EN EN EN EN EN EN Average ~ 80
25 Eurocodes NAs in Croatia (10) new documents publication of NAs continued updated/modified NAs (8) EN 1991 (1), EN 1992 (1), EN 1993 (5), EN 1997 (1) new NAs in preparation nrhrn EN /NA all published updated/modified NAs translated into English
26 Eurocodes NAs in Croatia (11) Croatian NDPs are regularly uploaded in JRC EN Eurocodes NDP Database (established by JRC EC) upload of NDPs made by the National Authority Ministry of Construction and Physical Planning
27 Eurocodes Implementation in Croatia implementation achieved by means of technical regulations technical regulations prepared by the Ministry of Construction and Physical Planning 6 regulations one for each type of structures (concrete, steel, composite steel and concrete, timber, masonry & aluminium) withdrawn Technical regulation for building structures a single regulation for all types of structures published
28 Eurocodes HZN further activities M/515 Mandate for amending existing Eurocodes and extending the scope of structural Eurocodes active participation of Croatian experts in the development of the new generation of Eurocodes (CEN/TC 250/SCs/WGs) regularly participate in certain SC meetings (SC 5, SC 7, SC 9, SC 11) experts working in WGs (14) (timber structures, aluminium structures, structural glass) preparing of NDPs for the new generation of Eurocodes
29 The way forward for the Eurocodes implementation in the Balkans October 2018, Tirana Thank you for your attention! Stay in touch
PROGRESS OF ELABORATION OF NDPs AND NAs IN SERBIA
BUILDING CAPACITIES FOR ELABORATION OF NDPs AND NAs OF THE EUROCODES IN THE BALKAN REGION PROGRESS OF ELABORATION OF NDPs AND NAs IN SERBIA Dušan Pajović, Senior Adviser Institute for Standardization of
Adoption of the Eurocodes in Bosnia & Herzegovina
ELABORATION OF MAPS FOR CLIMATIC AND SEISMIC ACTIONS FOR STRUCTURAL DESIGN IN THE BALKAN REGION Adoption of the Eurocodes in Bosnia & Herzegovina - Country Report - Assist. Prof. Dr. Sanin Dzidic, PE,
ADOPTION OF THE EUROCODES IN THE BALKAN REGION 5-6 December 2013, Milan & Ispra, Italy EUROCODES AND NATIONAL ANNEXES IN SERBIA CURRENT SITUATION
ADOPTION OF THE EUROCODES IN THE BALKAN REGION 5-6 December 2013, Milan & Ispra, Italy EUROCODES AND NATIONAL ANNEXES IN SERBIA CURRENT SITUATION Eurocodes are used as reference documents for the following
ADOPTION OF THE EUROCODES IN THE BALKAN REGION
ADOPTION OF THE EUROCODES IN THE BALKAN REGION 5-6 December 2013, Milan & Ispra, Italy ADOPTION OF THE EUROCODES IN THE BALKAN REGION Summary of the questionnaires filled by National Authority relevant
BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
EU MS Case study 4 : France
The way forward for the Eurocodes implementation in the Balkans 10-11 October 2018, Tirana EU MS Case study 4 : France Jean-Armand Calgaro Honorary General Engineer of Bridges and Roads Former CEN/TC250
cooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012
Perspectives and benefits of international cooperation in standardization Gonçalo Ascensão ç Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 CEN & CENELEC systems Links to legislation
CYS National Annex to CYS EN :2006
CYPRUS NATIONAL ANNEX NA to CYS EN 1998-4:2006 CYS National Annex to CYS EN 1998-4:2006 Eurocode 8: Design of structures for earthquake resistance Part 4: Silos, tanks and pipelines Prepared by Eurocodes
Present and Future of the Eurocodes
ADOPTION OF THE EUROCODES IN THE BALKAN REGION 5-6 December 2013, Milan & Ispra, Italy Present and Future of the Eurocodes Gerhard Breitschaft Vice-Chairman CEN/TC 250 Agenda 1. Introduction 2. Present
CEN strategies and plans for a global acceptance of the Eurocodes
CEN strategies and plans for a global acceptance of the Eurocodes Gonçalo Ascensão 5th December 2013 Adoption of the Eurocodes in the Balkan Region European Standardization System Links to legislation
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)
Eurocodes and National Annexes Republic of Macedonia
ADOPTION OF THE EUROCODES IN THE BALKAN REGION 5-6 December 2013, Milan & Ispra, Italy Eurocodes and National Annexes Republic of Macedonia Institute of the Republic of Macedonia ISRM History of Macedonian
Eurocode 9 Design of aluminium structures
BRITISH STANDARD Eurocode 9 Design of aluminium structures BS EN 1999-1-2:2007 Incorporating corrigenda December 2008, March 2009 and October 2009 Part 1-2: Structural fire design ICS 91.010.30; 91.080.10;
EN 1991 Elaboration of NA
BUILDING CAPACITIES FOR ELABORATION OF NDPs AND NAs OF THE EUROCODES IN THE BALKAN REGION EN 1991 Elaboration of NA Zlatko Šavor Faculty of Civil Engineering, University of Zagreb, Croatia Chairman of
the Eurocodes A. Athanasopoulou, F. Taucer,
Seminar Bridge Design with Eurocodes JRC Ispra, 1-2 October 2012 1 JRC activities i i in support of the Eurocodes A. Pinto, B. Acun, M. Poljansek, A. Athanasopoulou, F. Taucer, Joint Research Centre Institute
Doc. Number: N Report of CEN/TC 267 Secretariat "Industrial piping and pipelines" for the 30 th Plenary Meeting 27 October 2016 (Paris)
«Industrial piping and pipelines» CEN/TC 67 Date: 016-09-7 Assistant: Patricia DUFOUR Direct line: + (0)1 7 17 67 8 p.dufour@unm.fr Doc. Number: N 1069 Your contact: Patrick AMESLON Direct line: + (0)1
QAiST WP2 and 6 A status report
QAiST WP2 and 6 A status report ESTIF STD&C meeting December 2 nd 2010 Peter Kovács* and Jan Erik Nielsen *) SP Technical Research Institute of Sweden peter.kovacs@sp.se +46 706524802 Summary of presentation
On , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
Croatian Standardization and HZN. Cavtat, June 2013 Davorko Čehulić Tatjana Brica Žilić
Croatian Standardization and HZN Cavtat, 11 14 June 2013 Davorko Čehulić Tatjana Brica Žilić 1 DZNM, established in 1992 DZNM splits into 4 independent state/public institutions (2004) HZN DZM (state)
The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
Medical gloves for single use - Part 2: Requirements and testing for physical properties
Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.
Enquiry period: 13 th April 2010 to 11 th May 2010
Draft for Public Comment Number dna:2010 to I.S. EN 1991-1-3 Title Irish National Annex to Eurocode 1 Actions on structures - Part 1-3: General actions Snow loads This National Annex National Amendment
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60228 Third edition 2004-11 s of insulated cables IEC 2004 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,
BUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
EU Best practice of Technical Committees and benefits that could be achieved
EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,
Temporary structure - Tents - Safety
Irish Standard I.S. EN 13782:2015 Temporary structure - Tents - Safety CEN 2015 No copying without NSAI permission except as permitted by copyright law. I.S. EN 13782:2015 Incorporating amendments/corrigenda/national
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61754-4-1 First edition 2003-01 Fibre optic connector interfaces Part 4-1: Type SC connector family Reference number IEC 61754-4-1:2003(E) Publication numbering As from 1 January
This is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62730 Edition 1.0 2012-03 HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test INTERNATIONAL ELECTROTECHNICAL COMMISSION
POLICY GUIDELINES AND PROCEDURES FOR CEN/TC 250 STRUCTURAL EUROCODES
Document: CEN/TC 250 N 250 F Ref: 7232: CEN/TC 250 To the Members of CEN/TC 250 Structural Eurocodes Date: 28 December 2003 POLICY GUIDELINES AND PROCEDURES FOR CEN/TC 250 STRUCTURAL EUROCODES NOTE 1 This
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61511-2 First edition 2003-07 Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of IEC 61511-1 Reference number
EUROCODE 5 - A HALFTIME SUMMARY OF THE REVISION PROCESS
EUROCODE 5 - A HALFTIME SUMMARY OF THE REVISION PROCESS Miriam Kleinhenz, Stefan Winter 2, Philipp Dietsch 3 ABSTRACT: This document provides an introduction to the review process of Eurocode 5, the structure
BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment
IDENTIFICATION OF NEEDS FOR IMPROVED FIRE PROTECTION BY USE OF THE EUROCODES
IDENTIFICATION OF NEEDS FOR IMPROVED FIRE PROTECTION BY USE OF THE EUROCODES Support to the implementation, harmonization and further development of the Eurocodes S. Dimova, A. Pinto, A. Oztas, M. Geradin,
CEN/TC 151 N 800. N 800 CEN TC 396 Activity report. Date of document Expected action
CEN/TC 151 N 800 CEN/TC 151 Construction equipment and building material machines - Safety E-mail of Secretary: rene.kampmeier_vdma.org@livelink.din.de Secretariat: DIN N 800 CEN TC 396 Activity report
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-6 First edition 2006-02 Low-voltage electrical installations Part 6: Verification This English-language version is derived from the original bilingual publication by leaving
BUSINESS PLAN CEN/TC 249 PLASTICS
Page: 1 BUSINESS PLAN CEN/TC 249 PLASTICS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal, societal and/or
This document is a preview generated by EVS
TECHNICAL REPORT IEC TR 60825-5 Second edition 2003-06 Safety of laser products Part 5: Manufacturer's checklist for IEC 60825-1 Sécurité des appareils à laser Partie 5: Liste de contrôle du fabricant
EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE
TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING
Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures
Irish Standard I.S. EN 1992-3:2006 Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures NSAI 2006 No copying without NSAI permission except as permitted by copyright
To the Members of CEN/TC 250 Structural Eurocodes
Document: CEN/TC 250 N 1250 Date: 31 August 2018 To the Members of CEN/TC 250 Structural Eurocodes N 1250 POLICY GUIDELINES AND PROCEDURES (Version 7a) Note 1 This document provides the policy guidelines
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61511-1 First edition 2003-01 Functional safety Safety instrumented systems for the process industry sector Part 1: Framework, definitions, system, hardware and software requirements
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61511-1 First edition 2003-01 Functional safety Safety instrumented systems for the process industry sector Part 1: Framework, definitions, system, hardware and software requirements
ISO/TS TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ISO/TS 17892-8 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 8: Unconsolidated undrained triaxial test Reconnaissance et essais
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60567 Third edition 2005-06 Oil-filled electrical equipment Sampling of gases and of oil for analysis of free and dissolved gases Guidance This English-language version is derived
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-4-41 Fifth edition 2005-12 GROUP SAFETY PUBLICATION Low-voltage electrical installations Part 4-41: Protection for safety Protection against electric shock This English-language
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation
WORK PACKAGE 4 DELIVERABLE D.T4.1.4
WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60073 Sixth edition 2002-05 Basic and safety principles for man-machine interface, marking and identification Coding principles for indicators and actuators This English-language
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-3-5 Edition 2.0 2018-01 Environmental testing Part 3-5: Supporting documentation and guidance Confirmation of the performance of temperature chambers INTERNATIONAL ELECTROTECHNICAL
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60086-3 Second edition 2004-12 Primary batteries Part 3: Watch batteries This English-language version is derived from the original bilingual publication by leaving out all French-language
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33724-7 IEC 60364-7-712:2002 SOUTH AFRICAN NATIONAL STANDARD Electrical installations of buildings Part 7-712: Requirements for special installations or locations Solar photovoltaic (PV)
Annex D: Project Logframe Matrix
Annex D: Project Logframe Matrix OVERALL OBJECTIVE: Protect the unique ecosystems and biodiversity along the Sava River through supporting Croatia and Bosnia-Herzegovina in a) improving transborder cooperation
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-2-30 Third edition 2005 Environmental testing Part 2-30: Tests Test Db: IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized
Personal protective equipment - Safety footwear (ISO 20345:2011)
Irish Standard Personal protective equipment - Safety footwear (ISO 20345:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification
This document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 60745-2-11 Second edition 2003-01 Hand-held motor-operated electric tools Safety Part 2-11: Particular requirements for reciprocating saws Outils électroportatifs à moteur Sécurité
This document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 62054-21 First edition 2004-05 Electricity metering (a.c.) Tariff and load control Part 21: Particular requirements for time switches Reference number IEC 62054-21:2004(E) Publication
Contents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
Why participate in standardization work?
1 Why participate in standardization work? Morten Seljeskog / Morten.Seljeskog@sintef.no SINTEF Energi AS/SINTEF Energy Research, Kolbjørn Hejesvei 1a, 7465 TRONDHEIM Tel: +47 73 59 37 29 / Cell: +47 901
BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
TECHNICAL REPORT. Safety of laser products. Part 10: Application guidelines and explanatory notes to IEC Sécurité des appareils à laser
TECHNICAL REPORT IEC TR 60825-10 First edition 2002-02 Safety of laser products Part 10: Application guidelines and explanatory notes to IEC 60825-1 Sécurité des appareils à laser Partie 10: Guide d'application
Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)
Irish Standard Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) NSAI 2011 No copying without NSAI permission except as permitted
Eurocode: Basis of structural design. Eurokoodeks: Ehituskonstruktsioonide projekteerimise alused
EESTI STANDARD EVS-EN 1990:2002+NA:2002 Eurocode: Basis of structural design Eurokoodeks: Ehituskonstruktsioonide projekteerimise alused EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN 1990:2002+NA:2002
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions. Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
This document is a preview generated by EVS
TECHNICAL REPORT ISO/TR 15657 First edition 2013-06-15 Fire resistance tests Guidelines for computational structural fire design Essais de résistance au feu Lignes directrices sur la conception statistique
Paper and board - Determination of grammage (ISO 536:2012)
Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61442 Second edition 2005-03 Test methods for accessories for power cables with rated voltages from 6 kv (Um = 7,2 kv) up to 30 kv (Um = 36 kv) This English-language version
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60445 Fourth edition 2006-11 BASIC SAFETY PUBLICATION Basic and safety principles for man-machine interface, marking and identification Identification of equipment terminals
CEN/TC 442 Decisions taken /16
CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct
Irish Standard Recommendation S.R. CEN/TS 115-4:2015
Irish Standard Recommendation S.R. CEN/TS 115-4:2015 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards CEN 2015 No copying without NSAI permission except
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-6 First edition 2006-02 Low-voltage electrical installations Part 6: Verification This English-language version is derived from the original bilingual publication by leaving
PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code
STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL
ISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed
INTERNATIONAL STANDARD ISO 14744-4 First edition 2000-04-15 Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed Soudage Essais de réception des machines
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23963-3 SANS 50353-1:2003 EN 353-1:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Guided type fall arresters including a rigid anchor line
Camping tents (ISO 5912:2011)
Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based
NSAI Active work programme 05/02/2018
Project reference S.R. 28:201x - Revision Project title Recommendation for the use and implementation of the I.S. EN 13108 series bituminous mixtures material specifications Current_Phase Post Public Enquiry
ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests
TECHNICAL SPECIFICATION ISO/TS 17892-10 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests Reconnaissance et essais géotechniques Essais
Changes in international standards relating to diagnostic x-ray equipment, with particular attention to radiation protection
Changes in international standards relating to diagnostic x-ray equipment, with particular attention to radiation protection Tamás Porubszky a*, János Barsai b a Frédéric Joliot-Curie National Research
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61508-5 First edition 1998-12 Functional safety of electrical/electronic/ programmable electronic safety-related systems Part 5: Examples of methods for the determination of
Founding - Magnetic particle testing
Irish Standard Founding - Magnetic particle testing CEN 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based on the consensus
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60227-6 Third edition 2001-06 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 6: Lift cables and cables for flexible connections This
Mandate M/118 WASTE WATER ENGINEERING PRODUCTS
Mandate M/118 Page 1 sur 13 Mandate M/118 TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CReatE RELATED TO THE FOLLOWING END USES 18/33 : DRAINAGE (INC. HIGHWAS)
Request for tender regarding the validation of ammonia testing methods as supplement to pren 16516
Secretariat: Nederlands Normalisatie-instituut doc.nr. Vlinderweg 6 P.O. Box 5059 2623 AX DELFT 2600 GB DELFT date The Netherlands The Netherlands 2015-10-01 Telephone: +31 15 2 690 280 CEN/TC 351 N 0644
NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS IRISH STANDARD I.S. EN 12057:2004. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 12057:2004 ICS 91.100.15 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie NATURAL STONE PRODUCTS -
New EN Standard for Water meters Challenges for the market. Metering Europe 2005, Barçelona (E), September 2005
New EN Standard for Water meters Challenges for the market Metering Europe 2005, Barçelona (E), 20-22 September 2005 Presentation Introduction Context Standard for water meters Content EN 14154 Challenges
ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60076-5 Second edition 2000-07 Power transformers Part 5: Ability to withstand short circuit This English-language version is derived from the original bilingual publication
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62885-1 Edition 1.0 2016-08 Surface cleaning appliances Part 1: General requirements on test material and test equipment INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 97.080
Report on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1
Report on the activities of the ATEX consultant Xavier Lefebvre Contract : CENELEC/NA Consultant/2013-1 Period covered: from 1 January 2013 to 1 July 2013 1. Attended meetings Date Subject Location 2013.01.28
This is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62785 Edition 1.0 2013-02 Guidance on the environmentally conscious design of fibre optics related products and subsystems INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE L
Takashi USUDA, NMIJ. Source: Report of the ISO International Observer to the 7th CCAUV(2010) by Dr. H.-J. von Martens
ISO TC report ISO/TC 108 Mechanical vibration, shock and condition monitoring ISO/TC 108/SC 3 Use and calibration of vibration and shock measuring instruments ISO/TC 108/ SC3/WG 6 Calibration of vibration
BSI the UK voice into European and national standards
BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1 Contents What are standards? About BSI Standards
BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY
CEN/TC 79 Business Plan Page: 1 BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY Scope To prepare European Standards for respiratory protective devices (RPD) for work and rescue
CEN/TC 229 "Precast concrete products CEN/TC 229 N nd meeting of CEN/TC (Oslo) Draft agenda Revision 1
AFNOR-NORMALISATION Unit Construction and Water Cycle Department CEN/TC 229 Secretariat Your correspondent : Jean-Claude HESLING direct line : +33 (0)1 41 62 83 93 jeanclaude.hesling@afnor.org Secretary
Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems
Irish Standard I.S. EN 50159:2010 Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems NSAI 2010 No copying without NSAI permission
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60287-3-1 Edition 1.1 1999-05 Edition 1:1995 consolidated with amendment 1:1999 Electric cables Calculation of the current rating Part 3-1: Sections on operating conditions IEC
BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
ISO INTERNATIONAL STANDARD. Personal protective equipment Occupational footwear. Équipement de protection individuelle Chaussures de travail
INTERNATIONAL STANDARD ISO 20347 Second edition 2012-02-01 Personal protective equipment Occupational footwear Équipement de protection individuelle Chaussures de travail Reference number ISO 20347:2012(E)
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60245-5 Second edition 1994-07 Rubber insulated cables Rated voltages up to and including 450/750 V Part 5: Lift cables This English-language version is derived from the original
ILNAS-EN ISO 23640:2015
In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen