TEST & INSPECTION. OTDRs Certification Test Kits Loss Test Sets Inspection Cleaning

Transcription

1 TEST & INSPECTION

2 ROGUE aeros Test Workflow and Data Management Solution aeros - Workflow Management ROGUE Carrier with Module Smart Device Apps AFL is redefining the test and inspection industry from the ground up. Unburdened by legacy systems, aeros/rogue is a suite of products built completely around you, your team s workflow, your existing smart devices and other equipment, and your company s specific testing requirements. This comprehensive and flexible approach gives you an unprecedented level of control over every aspect of your testing process, including related capital and operating costs. aeros aeros is an open, cloud-based, workflow management platform that is the heart of our solution. It facilitates two-way communication and data exchange from engineering to project management to your technician in the field. Now everyone has access to test results and can address challenges in real-time. Project managers can send jobs directly to technicians, defining exactly which tests and configurations are needed. This reduces both set up time and mistakes in the field, creating real OPEX savings. Throughout the job, managers can monitor a technician s progress and help solve problems as they arise, thus avoiding expensive retesting and unnecessary truck rolls. ROGUE ROGUE is the modular hardware platform that works seamlessly with aeros. Like aeros, it is an open system built around you, for both CAPEX and OPEX savings. By unbundling software and hardware, the ROGUE platform allows you to invest in the application-specific tests you really need. Because ROGUE works with ios or Android, you can leverage your investment in your existing smart devices. Your technicians will use equipment and capabilities they are familiar with, further increasing their overall efficiency and your OPEX savings. Taken together, all these combined aeros/rogue advances have one singular goal: to help you build a better network.

3 ROGUE Carrier, Modules, Kits ROGUE Carrier Carrier FEATURES Flexible, open, and modular architecture Stand-alone or integrated with Android or ios device Inspection capable Bluetooth and Wi-Fi connectivity >8 hours Li-ion battery or AC power Lightweight, hand-held, easy to carry to any job ORDERING Turbo OLTS/Certification Modules FEATURES Turbo bi-directional testing on 2 links at once Dual-fiber, dual-wavelength, SM and MM versions Integrated OPM, OLS and VFL (650 mm) Encircled Flux compliant Multi-fiber Switch FEATURES Stand-alone or paired with other testers and OTDRs Converts a single port module into 12F MPO tester ROGUE Carrier ROGUE Module Multi-fiber Switch DESCRIPTION Rogue Carrier Rogue Turbo OLTS Module Quad MM/SM 850/1300/1310/1550 Rogue Turbo OLTS Module Single Engine MM 850/1300 Rogue Turbo OLTS Module Dual Engine MM 850/1300 Rogue Turbo OLTS Module Single Engine SM 1310/1550 Rogue Turbo OLTS Module Dual Engine SM 1310/1550 Rogue Certification Kit - Quad SM/MM Rogue Certification Kit - Dual Engine SM Rogue Certification Kit - Dual Engine MM Rogue Certification Add-On Kit - 12F SM SC/UPC-MPO/APC Rogue Certification Add-On Kit - 12F MM SC/UPC-MPO/UPC For details, see ROGUE product profiles at RG-C01 RG-1100-Q01 RG-1100-M01 RG-1100-M01-D RG-1100-S01 RG-1100-S01-D RGK-CERT01 RGK-CERT03 RGK-CERT04 RGK-MPO-SM-CERT-ADD RGK-MPO-MM-CERT-ADD

4 FLEXSCAN Pocket-sized OTDR with SmartAuto and LinkMap Combining SmartAuto network-optimized event detection and analysis with its intuitive LinkMap view of the tested network, FLEXSCAN OTDRs enable even novice technicians to quickly and easily troubleshoot or fully characterize optical fiber networks. FLEXSCAN is available in 1550 nm only and 1310/1550 nm versions with integrated VFL and optional source, power meter, Bluetooth and Wi-Fi communications. FEATURES Pocket-sized and rugged, ideal for field installation and maintenance SmartAuto OTDR with LinkMap simplifies test setup and results Automated connector inspection with FOCIS Flex APPLICATIONS Network installation, troubleshooting, maintenance Locate faults exceeding industry or user pass/fail thresholds Visually pinpoint location of macro-bends or breaks inside cabinets and splice closures SPECIFICATIONS WAVELENGTH (nm) OTDR PERFORMANCE DYNAMIC RANGE (db) DEAD ZONE EDZ/ADZ (m) LINKMAP OLS/OPM BLUETOOTH WI-FI /3.6 FS [KIT]-P0-W /3.6 FS [KIT]-P1-W1 1310/ /30 0.8/3.6 FS [KIT]-P0-W0 1310/ /30 0.8/3.6 FS [KIT]-P1-W1 FLEXSCAN are available in five kit configurations: Basic, Plus, PRO, BI Complete, and BIPM Complete. For details, see FlexScan product profile at

5 FLX380 FlexTester - High-performance Hand-held OTDR FLX380 FlexTester is the world s smallest, lightest, most complete single-mode fiber optic test set. It combines high-performance, multi-wavelength OTDR/PON OTDR, source, power meter, PON power meter and visual fault locator (VFL) in a rugged, hand-held package. FEATURES Patented in- or out-of-service testing from a single port ServiceSafe live PON detection and OTDR test without service disruption New LinkMap with Pass/Fail option simplifies fiber optic network evaluation Integrated OLS/OPM with Wave ID reduces test time 80% and eliminates setup errors APPLICATIONS FLX : Out-of-service installation testing or troubleshooting on both FTTx PON and point-to-point fiber optic networks FLX : Complete out-of-service testing at all FTTx PON wavelengths (1310/1490/1550 nm) FLX and 304: Verify both in-service (live) and out-of-service FTTx networks from a single port SPECIFICATIONS WAVELENGTHS (nm) OTDR PERFORMANCE DYNAMIC RANGE (db) DEAD ZONE EDZ/ADZ (m) LINK- MAP LIVE OTDR INTEGRATED CAPABILITY PON OPM OLS OPM VFL FOCIS FLEX 1310/ /42 0.8/2.5 FLX /1490/ /38/41 0.8/2.5 FLX /1550/ /41/38 0.8/2.5 FLX /1550/ /41/38 0.8/2.5 FLX Add connector inspection, cleaning and optional OFI to your FLX380 FlexTester Kit! For details, see FLX380 product profile at

6 OFL280 FlexTester - Multifunction OTDR and Loss Test Set The OFL280-10x FlexTester family offers an unmatched combination of optical fiber test functions, ease-of-use, portability, and value. All OFL280 FlexTester models include an integrated single-mode 1310/1550 nm OTDR with PON-optimized and standard test modes, optical power meter, 1310/1550 nm laser source, and visual fault locator (VFL). FEATURES Patented in- or out-of-service testing from a single port ServiceSafe live PON detection and OTDR test without service disruption New LinkMap with Pass/Fail option simplifies fiber optic network evaluation Integrated OLS/OPM with Wave ID reduces test time 80% and eliminates setup errors APPLICATIONS OFL : Cost-effective 1310/1550 nm OTDR for out-of-service installation testing or troubleshooting both FTTx PON and point-to-point fiber optic networks OFL : Complete out-of-service testing at all FTTx PON wavelengths (1310/1490/1550 nm) OFL : Verify both in-service (live) and out-of-service FTTx networks from a single port SPECIFICATIONS WAVELENGTHS (nm) OTDR PERFORMANCE DYNAMIC RANGE (db) DEAD ZONE EDZ/ADZ (m) LINK- MAP LIVE OTDR INTEGRATED CAPABILITY PON OPM OLS OPM VFL FOCIS INSPECTION 1310/ /32 0.8/3.5 PRO or Flex OFL /1490/ /32/32 0.8/3.5 PRO or Flex OFL /1550/ /32/30 0.8/3.5 PRO or Flex OFL Add connector inspection, cleaning and optional OFI to your OFL280 FlexTester Kit! For details, see OFL280 product profile at

7 CS FTTx PON Activation and Troubleshooting OTDR CS FTTx PON Activation and Troubleshooting OTDRs enable cost-effective troubleshooting of FTTx PONs and point-to-point metro/ access networks. The CS s 1625 nm Live PON OTDR provides 35 db dynamic range, best-in-class m event and attenuation dead zones, integrated PON power meter plus Visual Fault Locator (VFL). APPLICATIONS Verify metro/access fiber networks: measure loss and reflectance of individual splices and connectors, as well as end-to-end length, loss and optical return loss. Troubleshoot Live PONs: Verify downstream PON power levels. Locate source(s) of excess loss or reflectance in distribution or drop fibers on in-service FTTx PON using out-of-band 1625 nm Live PON OTDR with filtered detector. Visibly trace fibers or locate fiber bends or breaks: Use integrated VFL visible red laser to visibly detect light emanating from fiber breaks or macrobends. SPECIFICATIONS WAVELENGTHS (nm) OTDR PERFORMANCE DYNAMIC RANGE (db) INTEGRATED DEAD ZONE EDZ/ADZ (m) LINKMAP PON OPM VFL 1625 filtered /3.5 CS260-10

8 M series Enterprise OTDR with TruEvent Technology Rugged and lightweight, the M series OTDR features Touch and Test user interface that makes it easy for experts or novices to test and document fiber networks accurately and quickly. The M210e model is the inspection ready OTDR that combines OTDR, optical power meter (OPM), and visual fault locator (VFL) with a proven, easy to operate and understand interface. The M310 model adds an integrated optical light source (OLS) and comes standard with an Advanced Analysis software option that includes Macro/Microbend detection, Bi-directional Averaging Analysis, and LinkMap with Pass/Fail feature. FEATURES Industry leading TruEvent analysis Short dead zones provide precise testing of closely spaced events Front Panel and First Connector Check Live fiber detection APPLICATIONS Enterprise network Data Center LAN/WAN Campus and military fiber networks and more SPECIFICATIONS WAVELENGTHS (nm) OTDR PERFORMANCE DYNAMIC RANGE (db) DEAD ZONE EDZ/ADZ (m) INTEGRATED CAPABILITY LINK- MAP OLS OPM VFL INSPEC- TION 1310/ /37 0.8/3.5 DFS1 M /1300/1310/ /30/38/37 0.8/2.5 DFS1 M / /34 1.0/4.0 DFS1 M210e / /28 1.0/4.0 DFS1 M210e /1300/1310/ /28/34/34 1.0/4.0 DFS1 M210e-25 Available in kits. For details, see M310 and M210e product profiles at

9 M710 Large Display OTDR - with TruEvent Technology The M710 OTDR combines ease of use (Touch and Test ) and high performance in a rugged, large display (6.5 inches), hand-held package. With single mode dynamic ranges up to 44 db and MM/SM QUAD option, the M710 OTDR is ideal for testing and troubleshooting LAN/WAN, metro and long haul networks. The M710 OTDR utilizes AFL s industry leading TruEvent technology to provide a new level of accuracy and reliability in event analysis. FEATURES TruEvent event analysis technology Inspection capable with DFS1 Digital FiberScope Automatic Pass/Fail analysis Live fiber detection APPLICATIONS Tier 1 and Tier 2 testing and certification Test and certify campus & central office networks and Distributed Antenna Systems (DAS) fiber infrastructure Reporting with TRM 2.0 PC software (Basic License) Detect fault location and splice verification SPECIFICATIONS M710 QUAD OTDR WAVELENGTHS (nm) OTDR PERFORMANCE DYNAMIC RANGE (db) DEAD ZONE EDZ/ADZ (m) INTEGRATED LINK- MAP OPM VFL INSPECTION 1310/ /39 0.8/4.0 DFS1 M /1550/ /39/39 0.8/4.0 DFS1 M / /42 0.8/4.5 DFS1 M /1300/1310/ /24/39/37 0.8/4.5 DFS1 M For details, see M710 product profile at M710 OTDR with DFS1 FiberScope

10 Certification Products The C840 QUAD Certification Tester includes an integrated single-mode (Laser 1310/1550 nm) and multimode (LED 850/1300 nm) Optical Light Sources (OLS), Optical Power Meter (OPM), and Visual Fault Locator (VFL, 650 nm). The C840 may be paired with another C840 for Certification testing or used alone as a traditional power meter, light source or visual fault locator. C880 QUAD Certification (Tier 1) Test Kit includes two (2) hand-held C840 QUAD Certification Testers. All C series products include USB Flash drive, TRM 2.0 Test Results Manager trace analysis/reporting and certification or OPM loss reporting PC software (Basic License), AC adapters, switchable test port adapters, and accessories.. FEATURES Touch and Test intuitive user interface Automatic Pass/Fail analysis (TIA/ISO/EN) Wave ID detect if used with Wave ID light sources TRM 2.0 PC software (Basic License) Inspection capable with the DFS1 Digital FiberScope APPLICATIONS Tier 1 and Tier 2 testing and certification of premise networks Bi-directionally measure loss and length of fiber links Perform Pass/Fail Event and Link measurements Certify fibers using Pass/Fail criteria Create professional certification reports C880 QUAD Certification Test Kit ORDERING C880 KITS INCLUDED ACCESSORIES One-Click Cleaner (2.5 mm) One-Click Cleaners (2.5 mm, 1.25 mm), (4) SC/LC test cords One-Click Cleaner (2.5 mm), (4) SC/ST test cords C LP1-S1 C LP1-S1 C LP1-S2

11 WDM900 Lightwave Test Set The WDM900 is a rugged, portable and easy-to-use optical test set that simplifies in-service testing of live DWDM and CWDM networks. Within just seconds of connecting to a network port, WDM900 users know the status of each channel, which channels require attention and exactly what action is required. Two different models of WDM900 are available. WDM for commissioning, testing and troubleshooting of DWDM Access/Metro networks WDM for commissioning, testing and troubleshooting of CWDM and DWDM Access/Metro networks WDM FEATURES Health Meter summarizes channel performance in less than 3 seconds Detail Display provides one-touch diagnosis of any performance issue Automatic compensation for monitor tap ratio Onboard report generation IEC OSNR measurement (DWDM channels) APPLICATIONS Testing node splits in PON and broadband networks Testing DWDM overbuilds of CWDM networks Commissioning CWDM/DWDM mobile backhaul networks DAS installation and troubleshooting Restoration of Metro-E wavelength services Troubleshooting live mobile backhaul network ORDERING DESCRIPTION Includes a WDM900 configured for C-band 50 GHz and 100 GHz operation, SC/FC/LC test port adapters, SC/FC/LC input attenuators, (2) One-Click Cleaners, AC adapter, user s guide and soft carry case. Includes a WDM900 configured for C-band 50 GHz, 100 GHz and CWDM operation, SC/FC/LC test port adapters, SC/FC/LC input attenuators, (2) One-Click Cleaners, AC adapter, user s guide and soft carry case. WDM WDM WDM900-60

12 AFL offers a full range of optical power meters to support FTTx deployments, fiber network testing and certification, and basic power measurements. Backed by industry leading 5-year product warranties, these are the quality products you can trust. SPECIFICATIONS Optical Power Meters OPM5 Optical Power Meter CALIBRATED WAVELENGTHS (nm) DETECTOR TYPE MEASUREMENT RANGE (dbm) WAVE ID TONE a REF. SET DATA SAVE PC S/W 850, 980, 1300, 1310, 1490, 1550, 1625 InGaAs +26 to -50 OPM5-4D 850, 1300, 1310, 1490, 1550, 1625 InGaAs +10 to -75 OPM5-3D 850, 1300, 1310, 1490, 1550 Germanium +6 to -60 OPM5-2D 850, 980, 1300, 1310, 1490, 1550, 1625 InGaAs +26 to -50 OPM4-4D 850, 1300, 1310, 1490, 1550, 1625 InGaAs +10 to -75 OPM4-3D 850, 1300, 1310, 1490, 1550 Germanium +6 to -60 OPM4-2D 650, 660, 780, 850 Silicon +6 to -70 OPM4-1D 1490, 1550 Filtered InGaAs +10 to +20 to OPM4-FTTx b 850, 980, 1310, 1490, 1550, 1625 InGaAs +26 to -50 CSM , 1300, 1310, 1490, 1550, 1625 InGaAs +6 to -70 CSM , 1300, 1310, 1550 Germanium +6 to -60 CSM , 780, 850 Silicon +6 to -70 CSM1-1 a. 270 Hz, 330 Hz, 1 khz, and 2 khz Tone detection b. FTTx PON Power Meter with integrated VFL. BPON, GPON, EPON compatible.

13 LED and Laser Light Sources AFL offers a full range of light sources for testing single-mode and/or multimode fiber networks. Sources with Wave ID transmit two or more wavelengths simultaneously decreasing test time and reducing user errors when used with AFL Wave ID power meters. Encircled Flux (EF) Compliant Light Sources Standard multimode light source used with AFL Encircled Flux Mode Controller (ordered separately) Order EF mode conditioner with part number #MR to select different connector type. SPECIFICATIONS WAVELENGTHS (nm) OUTPUT PORTS EMITTER TYPE OUTPUT POWER STABILITY WAVE ID TONE OUTPUT 1310, 1490, 1625 (1): SM Laser -5 dbm ± 0.05 db/1 hr 270, 330 Hz, 1, 2 khz OLS7-FTTx 1310, 1490, 1550 (1): SM Laser -5 dbm ± 0.05 db/1 hr 270, 330 Hz, 1, 2 khz OLS7-FTTH 1310, 1550, 1625 (1): SM Laser -5 dbm ± 0.05 db/1 hr 270, 330 Hz, 1, 2 khz OLS , , 1550 (1): MM (1): SM LED Laser -20 dbm 0 dbm ± 0.05 db/1 hr N/A 2 khz 1310, 1550 (1): SM Laser 0 dbm ± 0.05 db/1 hr 270, 330 Hz, 1, 2 khz OLS2-DUAL 850, 1300 (1): MM LED -20 dbm ± 0.1 db/8 hrs N/A OLS1-DUAL 1310, 1550 (1): SM Laser 0 dbm ± 0.05 db/1 hr 270, 330 Hz, 1, 2 khz CSS1-SM 850, 1300 (1): MM LED -20 dbm ± 0.1 db/1 hr N/A CSS1-MM OLS4 OLS4 Integrated LED/Laser Source

14 AFL offers a variety of light sources and power meters combined into multimode (MLP), single-mode (SLP), and single-mode/multimode (SMLP) test kits. Sources with Wave ID transmit two or more wavelengths simultaneously decreasing test time and reducing user errors when used with Wave ID power meter. Advanced kits add functionality including in-unit storage of test results and TRM 2.0 reporting software, which enables technicians to organize test data, apply test rules for pass/fail analysis and build custom test reports using industry accepted templates. SPECIFICATIONS Optical Loss Test Kits SMLP5-5 Optical Loss Test Kit FIBER TYPE DYNAMIC RANGE (nm) SET REF. DATA SAVE WAVE ID PC S/W METER SOURCE MM OPM4-1D OLS1-1C MLP4-1D MM, SM OPM4-2D OLS1-DUAL MLP4-2D MM, SM OPM5-2D OLS1-DUAL MLP5-2D SM OPM4-3D OLS2-DUAL SLP4-6 SM OPM4-4D OLS2-DUAL SLP4-6D SM OPM4-4D OLS7-3 SLP4-7 SM OPM4-4D OLS7-FTTH SLP4-FTTH SM OPM4-3D OLS7-FTTx SLP4-FTTx SM OPM5-3D OLS2-DUAL SLP5-6 SM OPM5-4D OLS2-DUAL SLP5-6D SM OPM5-4D OLS7-3 SLP5-7 SM /1490/1550 OPM5-4D OLS7-FTTH SLP5-FTTH SM OPM5-3D OLS7-FTTx SLP5-FTTx MM, SM OPM4-2D OLS4 SMLP4-4 MM, SM OPM5-2D OLS4 SMLP5-5

15 Encircled Flux (EF) Compliant Test Kits Since adoption by the IEC, Encircled Flux (EF) multimode launch requirements are increasingly specified into fiber loss testing job requirements. Meeting EF specification requires technicians use EF qualified sources and test sets. It is important to note IEC and TIA B Ed. 2.0 specify EF multimode launch conditions at the end of an EF qualified Reference Grade Test Cord (RGTC), not directly out source test port. Thus, EF compliance requires an EF Light Source and RGTC used together. AFL EF compliant sources and loss test kits include: LOSS TEST KITS (a, b) FIBER TYPE DYNAMIC RANGE (nm) AVAILABLE CONNECTORS SOURCE PORT TEST CORD INCLUDED 2-METER TEST CORDS LAUNCH (µm) RECEIVE (µm) POWER METER LIGHT SOURCE MM SM FC, SC FC, SC, ST, LC MM: RGTC, 50/125 SM: 9/125 MM: 50/125 SM: 9/125 OPM5-2D OLS4-EF SMLP5-5-EF MM SM FC, SC FC, SC, ST, LC MM: RGTC, 50/125 SM: 9/125 MM: 50/125 SM: 9/125 OPM4-2D OLS4-EF SMLP4-4-EF SMLP5-5-EF test Kit MM FC, SC FC, SC, ST, LC MM: RGTC, 50/125 MM 50/125 OPM5-2D OLS1-DL-EF MLP5-2-EF MM FC, SC FC, SC, ST, LC MM: RGTC, 50/125 MM 50/125 OPM4-2D OLS1-DL-EF MLP4-2-EF SOURCES (a, b) WAVELENGTHS (nm) OUTPUT PORTS EMITTER TYPE OUTPUT POWER (dbm) STABILITY 850, 1300, 1310, 1550 MM, SM LED, Laser -20 (MM port), 0 (SM port) ± 0.05 db/1 hr OLS4-EF 850, 1300 MM LED -20 ± 0.1 db/8 hrs OLS1-DUAL-EF a. Light Source with designed in Encircled Flux (EF) optics paired with one EF qualified RGTC b. 50/125 µm receive test cord. Light Source with two 9/125 µm test cords (launch/receive)

16 Visual Fault Identifiers Visual Fault Identifiers (VFI) use powerful red lasers to trace and troubleshoot single-mode or multimode optical fiber links. VFI is an ideal tool for locating a large number of defects that occur at connection points in and around fiber cabinets which are hidden in an OTDR s blind-spot or dead-zone. AFL offers VFI units for both single-ferrule and multi-ferrule connector styles. MT TRACER Essential tool for ribbon cable testing Multi-fiber VFI with 12 separately controlled lasers Verify connectivity of a 12-fiber ribbon cable Confirm polarity in seconds. HiLite and VFI2 SERIES Identify fiber faults inside OTDR dead zone Identify sharp bends or breaks in fibers Identify poorly mated connectors Verify AFL FAST Connector Installation SPECIFICATIONS MT Tracer PRODUCT WAVELENGTH OUTPUT POWER EMITTER CONNECTOR POWER MT Tracer 650 nm 1 mw, 2 Hz or CW Laser MTP 2 AA (40 hours) HiLite 650 nm 1 mw, 2 Hz Laser 2.5 mm Universal 1 x AAA (16 hours) VFI2 650 nm 1 mw, 2 Hz or CW Laser 2.5 mm Universal 2 x AA (60 hours) ORDERING HiLite and VFI PRODUCT DESCRIPTION MT Tracer MT Tracer Kit: MT Tracer Source, MT Tracer Display, and carry case TRCR HiLite HiLite visual fault identifier with 2.5 mm adapter VFI PR HiLite HiLite visual fault identifier with 2.5 mm and 1.25 mm adapters VFI PR VFI2 VFI2 visual fault identifier with 2.5 mm adapter VFI PR VFI2 VFI2 visual fault identifier with 2.5 mm and 1.25 mm adapters VFI PR

17 Optical Fiber Identifiers OFI Optical Fiber Identifier: Detects optical signals sent through single-mode fiber without disrupting traffic, differentiates traffic from 2 khz tones, indicates traffic direction. OFI Enhanced OFI: Adds LCD display of power. Designed for use with a wide range of single-mode fibers including 250 μm (bare) coated, 900 µm buffered and ribbon fibers or 2 mm and 3 mm jacketed fibers. OFI-400C - Optimized for Jacketed Fiber: Functionally equivalent to the OFI-400 but designed specifically for use with 2 mm or 3 mm jacketed single-mode fibers. OFI-400HP - High Power Applications: Designed for use where high levels of optical power are present. When display reaches +23 dbm (200 mw) or greater, the OFI-400HP displays High warning indication. OFI-200 and OFI-400x Models FIBER COATING TYPE INSERTION LOSS (db) TONE (Hz) (nm) 250 & 900 µm, ribbon, 2 & 3 mm jacketed khz 9V OFI-200D 2 & 3 mm jacketed , 330 Hz; 1, 2 khz (2) AAA OFI-400C 250 & 900 µm, ribbon, 2 or 3 mm jacketed , 330 Hz; 1, 2 khz (2) AAA OFI & 3 mm jacketed , 330 Hz; 1, 2 khz (2) AAA OFI-400HP OFI-BI and OFI-BIPM: Full featured OFI includes a touch screen, positive stop trigger and several easy to select options. This OFI can be used with any SM fiber including bend insensitive fiber, bare fibers, ribbons and up to 3 mm jackets and most MM fibers. The BIPM model adds an integrated optical power meter. OFI-BI and OFI-BIPM FIBER COATING TYPE DETECTABLE SIGNALS POWER METER POWER 0.25 mm SM and SM ribbon fiber (up to 12 ribbon) 1.1 /1.5 /1.7 /2.0 /3.0 mm SM jacketed fiber 0.25 mm SM and SM ribbon fiber (up to 12 ribbon) 1.1 /1.5 /1.7 /2.0 /3.0 mm SM jacketed fiber CW, Traffic,270 Hz/1 khz/2 khz (2) AA OFI-BI CW, Traffic,270 Hz/1 khz/2 khz (2) AA OFI-BIPM

18 FOCIS Flex Fiber Optic Connector Inspection System FOCIS Flex is the world s smallest, fastest, self-contained fiber connector inspection probe. Its innovative, ultrafast auto-focusing system autocenters, captures and analyzes the optical fiber end-face, displaying Pass/Fail results on the built-in screen in one push of a button. Results can be transferred wirelessly to smart devices or FlexTester and FlexScan OTDRs. The FOCIS Flex offers built-in pass/fail analysis to IEC , IPC or user set criteria. The device can also be used for OptiTap and MTP/ MPO inspections with AFL adapters. FEATURES Auto-focus and auto-centering for fast, easy inspection Untethered operation simplifies access at patch panels Pass/fail analysis using IEC , IPC or user-defined criteria Self-contained, compact, hand-held inspection solution Use independently, or Bluetooth pair with FlexTester or FlexScan OTDR APPLICATIONS Inspect connectors on patchcords or in bulkhead adapters Optical network installation, troubleshooting and maintenance Assure critical fiber infrastructure performs properly Keep fiber connections working at optimal performance levels ORDERING DESCRIPTION FOCIS Flex, soft carry case/holster, AC charger, wrist strap, no tips FOCIS Flex, soft carry case/holster, AC charger, wrist strap, UPC bulkhead and UPC ferrule tips (1 ea), One-Click Cleaner FOCIS Flex, soft carry case/holster, AC charger, wrist strap, APC bulkhead and APC ferrule tips (1 ea), One-Click Cleaner Purchase in Kit with FlexTester or FlexScan OTDR and save! FOCIS-FLX-P4XN FOCIS-FLX-P4XU FOCIS-FLX-P4XA For details, see FOCIS Flex, FLX380, OFL280 or FlexScan product profiles at

19 FOCIS WiFi PRO Fiber Optic Connector Inspection Systems The FOCIS WiFi PRO system combines AFL s powerful fiber connector inspection and analysis with the familiar ease of a smart device. FOCIS WiFi PRO works the way you do connected to your phone or tablet. FOCIS WiFi PRO enables mobile workers to complete remote fiber optic connector inspection tasks while remaining connected to coworkers and managers. The AFL FOCIS application software enables users to view live images on their smart devices, save, recall and share saved end-face images via , text of mobile cloud applications like Dropbox and Google Drive. FEATURES Automatically analyze connector integrity and save, recall and share results via or cloud applications IEC , AT&T TP and user-defined pass/fail criteria Full pass/fail analysis in less than 1 second Compatible with iphone and ipad (ios7) Compatible with Android and up APPLICATIONS Enterprise and Campus Networks Data Center patch panels, trunks, patch cords and equipment terminations Long-haul, Metro Core and Access Links Broadband and CATV Networks Access network cabinets and drops ORDERING MODEL AND DESCRIPTION FOCIS WiFi PRO UPC Kit with adapter tips and cleaners FOCIS WiFi PRO APC Kit with adapter tips and cleaners FOCIS WiFi PRO MPO Kit with adapter tips and cleaners FOCIS WiFi PRO Data Center Kit with adapter tips and cleaners FMPR-00-04XU FMPR-00-04XA FMPR-00-04XM FMPR-00-04XD

20 DFS1 Digital FiberScope The DFS1 Digital FiberScope supports magnified video inspection of optical fiber connector end-faces during fiber optic cable and connector installation and maintenance. The DFS1 connects via USB port to AFL s FOCIS series, M-Series OTDRs and C-Series OTDRs or Certification Testers to display and archive inspection images. An extensive array of adapter tips is available to support inspection of all commonly used fiber optic connectors. Fiber end-faces may also be viewed on a PC (using AFL SimpleView software) by connecting the DFS1 to the PC s USB port. FEATURES 400x magnification Fast, easy focus and display capture Extensive assortment of adapter tips Adapter tips easily changed; no tools required APPLICATIONS Ideal for telco, broadband and enterprise applications Optical connector and bulkhead adapter inspection Powered from USB; no batteries required ORDERING MODEL AND DESCRIPTION DFS1 Digital FiberScope PC/UPC Inspection Kit DFS1 Digital FiberScope APC Inspection Kit DFS1 USB Digital Fiber Inspection Kit without adapters DFS-00-04XU DFS-00-04XA DFS-00-04XN AFL SimpleView Fiber Inspection Software AFL SimpleView Fiber Inspection Software is an application that permits the AFL DFS1 Digital FiberScope to be used with Windows XP or Windows 7 computers. AFL SimpleView software provides a live, high-resolution video image of the end-face of an optical fiber. This capability enables fiber installers and network technicians to inspect and troubleshoot optical fibers and verify that they are clean and undamaged. AFL SimpleView software is available as a free download from AFL,

21 Fiber Optic Cleaning Solutions AFL fiber optic cleaning products provide network technicians and other staff to safely and effectively clean fiber optic connectors, dramatically decreasing network outage and downtime. For details, see our Fiber Optic Cleaning and Inspection catalog or visit One-Click Cleaners DESCRIPTION One-Click Cleaner SC, ST, FC (500+ cleans) One-Click Cleaner LC/MU (500+ cleans) One-Click Cleaner Mini-100 SC, ST, FC (100+ cleans) One-Click Cleaner Mini-100 LC/MU (100+ cleans) One-Click Cleaner Mini-500 SC, ST, FC (500 cleans) One-Click Cleaner Mini-500 LC/MU (500 cleans) One-Click Cleaner Ultra 2.5 SC, ST, FC (enlarged cleaning) One-Click Cleaner ODC (outdoor connector) One-Click Cleaner D-LC, Duplex LC (500+ cleans X2) One-Click Cleaner MPO (500 cleans) One-Click Cleaner SC, ST, FC (box of 5 units) One-Click Cleaner LC/MU (box of 5 units) One-Click Cleaner Mini-100 SC, ST, FC (box of 5 units) One-Click Cleaner Mini-100 LC/MU (box of 5 units) One-Click Cleaner Ultra 2.5 SC, ST, FC (box of 5 units) Cletop SB with White Tape Replacement Tape Type S - White MZ MZ MZ MZ MZ MZ MZ MZ MZ MZ MZ MZ MZ MZ MZ MZ MZ Cletop SB

22 Accessories AFl offers an extensive array of fiber optic test and inspection accessories, cleaning supplies, and test reporting software. OTDR launch and receive/tail cords - Fiber Rings Custom-designed Network Simulators Encircled Flux (EF) Modal Conditioners Encircled Flux (EF) Reference Grade Test Cords Mandrels for Multimode Link Testing TRM 2.0 Test Results Manager PC software Connector adapters for fiber optic testers Adapter tips for inspection products Multimode Test Jumpers (62.5/125 µm - 2 meters) Single-mode Test Jumpers (9/125 µm - 2 meters) Mating Adapters (Bulkheads) Bare Fiber Test Accessories Power Supplies and Cords And much more at Calibration Services Servicing your valuable AFL Test & Inspection equipment at authorized AFL calibration facilities ensures you are getting the most out of your equipment and it is performing accurately. Many test standards require annual calibration. Authorized AFL calibration facilities are ISO 9001 certified, traceable to the National Institute of Standards and Technology, and in compliance with ANSI/NCSL Z540-1, ISO AFL has an authorized calibration/repair facility for AFL products in the USA, Europe and Asia Pacific. USA AFL Test & Inspection Division 16 Eastgate Park Road Belmont, NH Europe Fujikura Europe Ltd C51 Barwell Business Park Leatherhead Road Chessington, Surrey, KT9 2NY +44 (0) Asia Fujikura Asia Ltd 438A Alexandra Road, #08-03 Blk A, Alexandra TechnoPark- Singapore calibration.fal@sg.fujikura.com

23 For more information about AFL's OTDRs, Certification Test Kits, Loss Test Sets, Inspection Systems, Cleaning Solutions and Accessories contact us at (800) , (603) or online at FTK PRO INSTALLER KITS FTTx PON SIMULATOR KITS FIBER RINGS CLEANING, INSPECTION AND TEST KITS

24 or (800) , (603) LC Revision , AFL, all rights reserved. Specifications are subject to change without notice.