XEON. High impact resistant body and PC cover. Double layer coating. through wiring. Build-in microwave sensor.

Transcription

1

2 XEON is a rectangular shape wall or ceiling fixture. This luminaire family has a robust aluminium construction housing with a high impact resistant polycarbonate diffuser. It is to be operated with LED and compact fluorescent lamp. XEON with LED unit is also available with built-in microwave sensor and hi-low light function. The diffused light distribution provides general lighting for both private and public areas. XEON is available in 3 different front cover styles with a choice of 6 colours. High impact resistant body and PC cover. Two cable entries for through wiring. Double layer coating. Electronic control gear. Build-in microwave sensor. Hi-Low light function. Changeable LED unit. Available in 6 colors. 244

3 Specification Fixture is manufactured in compliance with international standard of general requirement IEC and fixed general purpose luminaires IEC Electrical protection class1. Protection against dust and water IP65. Protection against mechanical impact IK 09 on body and optical part. High-pressure Die Cast Aluminium alloy body and components. Nano Ceramic surface conversion, resistant to corrosive environment. Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200 C. Self-extinguishing high impact resistant opal polycarbonate diffuser with UV stabilized additive. Material from Teijin Japan. Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40 C to +200 C. External screws are in stainless steel with protection dipping. Cable entry protected by weather proof EPDM grommet and to be used with H05RN-F/ H07RN-F cable with 7-10mm. diameter. E27 lampholder in ceramic body from Vossloh Schwabe or equivalents. VDE/ ENEC approved. G24d/ GX24d lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. G24q/ GX24q lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. Low loss magnetic ballast for fluorescent lamp from BAG Electronics or equivalents. ENEC approved. Electronic ballast for fluorescent lamp from TCI/ Tridonic or equivalents. ENEC approved. High efficiency SMD LED module with built-in constant current LED driver. Replacable module for future upgrade or maintenance. As an option with motion detector Microwave Sensor. The whole systems tested to be operated under maximum ambient environment up to +40 C. Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents. IMQ approved. Working temperature -40 C to +180 C. Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm 2. VDE approved. Class1 luminaire provided with the earth connection. Installation work has to be carried on according to the enclosed installation manual. Available Color Black (replace the last 2 digits of ordering code with 01) Graphite (replace the last 2 digits of ordering code with 02) Dark Grey (replace the last 2 digits of ordering code with 03) Aluminium Silver (replace the last 2 digits of ordering code with 04) Smooth Silver (replace the last 2 digits of ordering code with 05) White (replace the last 2 digits of ordering code with 06) 245

4 On-Off Function This luminaire is equipped with motion switch sensor. It turns on the light on detection of people movement and turns off after a pre-selected holdtime when there is no people around. A daylight sensor is also built-in to switch off the light when there is sufficient natural light. With sufficient natural light, the light does not switch on when presence detected. With insufficient natural light,the sensor switches on the light automatically when person enters the room or passes by. After the hold time, then switch off automatically when no movement is detected. 246

5 Step Dimming Function With the combination of our DIM Driver, it offers the 2 levels of light: 100% on detection of people movement, and dimmed (pre-selected 0%, 25%, 50%) in the absence of people. Ideally for the areas like hotel corridor, hospital or garage, where always need some brightness for comfort and safety. Note: in this application, light never turns off even when the natural light is over the selected threshold. The lamp always turns on at pre-defined dimming level. The sensor switches the light at 100% level automatically when a person walks into the room or passes by. After the hold time, the lamp dims to the pre-defined dimming level when the person leaves the detection area. 247

6 XEON XEON Cross Wall Light IP65 Class1 LED 14W w/o Sensor XX (3000K) XX (4000K) LED 15W with Sensor XX (3000K) XX (4000K) TC-D G24d-3/ TC-DEL G24q-3 26W 1800lm XX (CG)* XX (EG)** Note: XEON Cross Wall Light is also available in 2x11W compact fluorescent lamp. Please contact our sales representatives for more detail. TC-TSE E27 23W 1500lm XX XEON Roof Wall Light IP65 Class1 LED 14W w/o Sensor XX (3000K) XX (4000K) LED 15W with Sensor XX (3000K) XX (4000K) TC-D G24d-3/ TC-DEL G24q-3 26W 1800lm XX (CG)* XX (EG)** Note: XEON Roof Wall Light is also available in 2x11W compact fluorescent lamp. Please contact our sales representatives for more detail. TC-TSE E27 23W 1500lm XX (CG)* = Magnetic Control Gear (EG)** = Electronic Control Gear 248

7 XEON Flat Wall Light IP65 Class1 LED 14W w/o Sensor XX (3000K) XX (4000K) LED 15W with Sensor XX (3000K) XX (4000K) TC-D G24d-3/ TC-DEL G24q-3 26W 1800lm XX (CG)* XX (EG)** TC-S G23 2x11W 2x900lm XX (CG)* = Magnetic Control Gear (EG)** = Electronic Control Gear 249