Fire Alarm Devices. Drexel Thrash Laborers Training Center. Supplier: Tri S Controls

Size: px
Start display at page:

Download "Fire Alarm Devices. Drexel Thrash Laborers Training Center. Supplier: Tri S Controls"

Transcription

1 Oh, Lic #26962 Drexel Thrash Laborers Training Center Fire Alarm Devices Supplier: Tri S Controls SHOP DRAWINGS Lake Erie Electric, Inc. FOR DWG. & SPEC. CONFORMITY ONLY D.M.Y 08/17/2016 By ebelba at 11:16 am, Sep 22, 2016

2 S3 Series Control Panel The Gamewell-FCI, S3 Series Intelligent Fire Alarm Control Panel provides the latest innovative high-end processing power. It offers a simple, intuitive solution for the small to mid-sized fire alarm applications. Small Analog Addressable Fire Alarm Control Panel In standalone or network configurations, the S3 Series complies with most fire alarm application requirements. It supports either of the following types of networks. Up to 64 nodes using the 7100 Series panel. Up to 122 nodes using the S3 Series or E3 Series panels. Use either twisted-pair wire or fiber-optic to network panels at a high-speed 625K baud ARCNET network bus. With flexible Boolean logic, intelligent detection, and Ethernet connectivity, this system provides power and versatility that surpasses comparable, small addressable fire alarm systems. The basic S3 Series consists of an SLP (Smart Loop Panel) main board, LCD-SLP touchscreen display, SLC loop personality modules, and 7 amp power supply. The SLP provides either one or two SLC loops in Class A or B configuration that supports either of the following protocols: Up to 318 devices per loop using the System Sensor protocol. If you add a second loop module, it increases the maximum device count to 636 devices. Up to 126 devices per loop using the Apollo protocol. If you add a second loop module, it increases the maximum device count to 252 devices. Four Class B or two Class A NACs can be wired and synchronized using the System Sensor, Cooper-Wheelock, or Gentex strobes. To retrofit the SLP on the existing audible/ visual appliances, the on-board Electronic EOL (EEOL) automatically adjusts to the EOL resistor in the field. A 4.3" (10.92 cm) color touchscreen display screen shows the following: Events on the system Status of analog addressable devices Complete diagnostic fault codes/messages Five programmable function buttons with LED status for accessibility to the following functions: - Disable/Enable - Trouble Acknowledge - Bypass Output - Alarm Acknowledge - Lamp Test - Custom-defined Features SIGNALING S3 Series Listed per ANSI/UL Standard 864 9th Edition. IBC Seismic Certified. Allows one SLC loop (expandable to two loops) that supports either System Sensor or Apollo devices in Class A or Class B (Style 4, 6 or 7). System Sensor supports up to 318 intelligent devices and each SLC loop supports the following. - up to 159 detectors. - up to 159 modules (expandable to 636 maximum per panel). Apollo supports up to 126 intelligent detectors and modules per SLC. (Expandable to 252 maximum per panel). Includes a high resolution (4.3 ) (10.92 cm) color touchscreen display. Supports a network system of up to 122 nodes (includes E3 Series panels) or up to 64 nodes (includes 7100 Series). Provides 7.0 amp power supply (120VAC or 240VAC). Includes four Class B or two Class A built-in Notification Appliance Circuits (NAC). Provides selectable System Sensor, Cooper-Wheelock, or Gentex strobe synchronization. Supports up to 32 serial annunciators (LCD, LED-only, LED Switch). E3 Series, System Sensor and FocalPoint are registered trademarks of Honeywell International Inc. UL is a registered trademark of Underwriters Laboratories Inc. Reference Certificate of Compliance S :0176 VMA C (Revision 1) 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use by Honeywell International Inc. All rights reserved Rev. D page 1 of 4

3 Application The S3 Series Fire Alarm and Life Safety System is an easy-to-use intelligent fire alarm solution designed for the small to mid-sized buildings. Analog technology delivers the benefits of a simple system installation, while a userfriendly interface makes panel operation and system maintenance quick and intuitive. Smart Panel Programming Using Boolean logic programming, the installer may customize the system to precisely suit the needs of the building owner. Auto-programming allows the installer to instantly locate all the devices on the SLC loop. Simple, Intuitive Display The front panel display provides a user-friendly interface for the operator's control. A 4.3 ( cm) color touchscreen displays system status, event details and service modes. On the front of the panel, six LEDs show the following conditions. Fire Silenced Hazard (Gas or CO) AC Power Supervisory Trouble Five custom programmable switches allow the user quick access to common functions specific to the building like device disable, output bypass and device status. Perfect for Retrofits The S3 Series is well-suited for retrofit applications. The SLP provides a simple way to upgrade your fire protection system. It is designed to be an upgrade solution for the legacy FCI 7100 and Gamewell 602 Series panels. An added feature is the SLP's EEOL. Using EEOL, the installers can automatically identify the EOL for existing audible/visual appliances. Flexibility for Future Growth The S3 Series can be expanded to add a second SLC loop without replacing the entire system. Using the RPT-E3- UTP Network Repeater, you can network up to 64 nodes (122 nodes with the ANX node expander) using either twisted-pair or fiber-optic. The built-in Ethernet port allows the connection to the Gamewell-FCI s FocalPoint Graphical Workstation. Figure 1 LCD-SLP Display Features (Continued) Offers an Ethernet port for programming, a variety of system reports, and a FocalPoint Graphic Workstation connectivity. Provides two fully-programmable Form-C contacts for Fire, Trouble, and Supervisory. TimeCap - Saves time and date up to 48 hours without any power or battery. Automatically adjusts to any NAC End-of-Line Resistor (EOL) value (1k-55k ohm) for legacy audible/visual appliances. Removable display can be used as a remote annunciator. Suitable for pre-action deluge applications. Optional Accessories DACT-E3 - Dialer The Digital Alarm Communication Transmitter sends digital signals over telephone lines to the central station. It connects to the SLP through an RS-485 bus. Using the Contact ID format, the DACT-E3 provides a four-digit account code followed by the code/numbers listed below: Three-digit Event Code Two-digit Group Number Three-digit Contact Number All codes are used to provide specific point identification. The DACT-E3 is compatible with digital alarm communicator receivers (DACRs) that receive the following signaling formats: Contact ID SIA For more information, refer to the following data sheets: DACT-E3 Data Sheet, P/N: FML-E3/FSL-E3 Data Sheet, P/N: RPT-E3-UTP - Network Repeater Card The Network Repeater allows the SLP fire control panels to connect to the broadband network from remote locations. It connects to other networked units using unshielded, twisted-pair wiring. The RPT-E3-UTP is available with two add-on fiber modules: FML-E3 connects to the network using either 62.5/125 micron multi-mode fiber. FSL-E3 connects to the network using 9/125 micron single-mode fiber. Refer to the RPT-E3-UTP Data Sheet, P/N: LCD Remote Annunciator The Remote serial display features an 80-character display. The LCD-7100 can be surface or flush-mounted on a standard 4-gang electrical box. You can use up to five LCD-7100 remote annunciators per SLP panel. For more information, refer to the LCD-7100 Data Sheet, P/N: ASM-16 - Addressable Switch/LED Module There are 16 programmable switches available to perform any function the application requires. Each ASM-16 switch has 3 LEDs fully programmable in red, yellow, and green. These LEDs can be programmed to operate with a certain button press or operate independently as a status signal (e.g. ON, OFF, Activated, etc). Up to 16 ASM-16 modules can be connected to the SLP panel. For more information, refer to the ASM-16 Data Sheet, P/N: ANU LED Driver Unit The ANU-48 provides output for eight remote panel switches and 48 remote LEDs for use in a remotely located UL Listed annunciator enclosure. Up to 16 ANU-48 modules can be connected to the SLP panel. For more information, refer to the ANU-48 Data Sheet, P/N: Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Rev. D page 2 of 4

4 Figure 2 illustrates the SLP-BB Cabinet Enclosure. SLP-BB CABINET OUTER DOOR SLP-BB CABINET BACKBOX Figure 2 SLP Enclosure " W 21.50"H 4.547" D Specifications Device Loops NAC circuits NAC Operating Voltage NAC Minimum Voltage SLC Loop Circuit Operating Voltage Input Voltage Up to two Class A or B, System Sensor units, each loop supporting up to 318 device addresses. Or- Apollo units, each loop supporting up to 126 device addresses per loop. 4 Class B or 2 Class A (2.0 A each circuit), 6.0 A total 24 VDC V battery voltage 24 V peak-to-peak 120 VAC, 60 Hz 240 VAC Hz Input Current 120 VAC, 2.75 amps max. 240 VAC, 1.4 amps max. Aux Power 1 (Continuous) 24 VDC nominal at 1.0A Aux Power 2 (Resettable) 24 VDC nominal at 1.0A Base Panel Current draw Standby: amps Alarm: amps Operating Temperature F (0-49 C) Relative Humidity 93% (non-condensing) Battery Charger Voltage +24 VDC Battery Charger Capacity Alarm, Trouble & Supervisory Relay Contacts Cabinet Dimensions: SLP-BB Dimensions S3BB-RB Dimensions 55 A/H batteries (cabinet accommodates 12 A/H batteries) Form-C, 2 24VDC (resistive) W x 21.5 H x D (35.79 W x H x cm) 19 3/8 W x 19 3/8 H x 4.5 D (49.22 W x H x D) Supports up to 636 Velociti devices or 252 XP95 devices DNR Intelligent Duct Detector MCS-COF Fire/Carbon Monoxide Detector S3 Series Fire Alarm Control Panel Networkable up to 122 panels using twisted pair wire or fiber optics. ASD-PL2F Photo Detector ASD-LS Laser Detector AMM-2IF Mini Monitor Module AMM-2RIF Dual Input/Output Module Local Energy Trip E3 Series Panel LCD-7100 Remote Annunicator AOM-2RF Relay Module LCD-SLP Color Touchscreen Annunicator MS-7AF Pull Station LCD-E3 Remote Annunicator RS485 Relay: 3 Form C DACT RS232 Ethernet FocalPoint Workstation ASM-16 LED Switch Control ANU-48 LED Display Driver Laptop Programming Figure 3 SLP Panel Configuration 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Rev. D page 3 of 4

5 Ordering Information Part Number SLP-BLK SLP-RED SLP-RED-G SLC-PM SLP addressable FACP in black SLP-BB enclosure. Requires either an SLC-PM or an SLC95-PM for SLC loops. SLP addressable FACP with red door and black SLP-BB backbox. Requires either an SLC-PM or an SLC95-PM for SLC loops. SLP addressable FACP 240VAC power supply with red door and black SLP-BB backbox. Requires either an SLC-PM or an SLC95-PM for SLC loops. System Sensor Loop Card - 1 loop used for 159 sensors and 159 modules. For use with the SLP-E3 panels only. SLC95-PM Apollo Loop Card-1 loop used for 126 sensors and modules. For use with the SLP-E3 panels only. Ordering Information (Continued) Part Number Accessories DACT-E3 LCD-SLP RPT-E3-UTP FML-E3 FSL-E3 SLP-RB FLPS-7-RB SLP-RETROFIT S3BB-RB LCD-7100 ASM-16 ANU-48 Digital Dialer Communicator Transmitter for the S3 or E3 Series. LCD Color Touchscreen display with five programmable switches. For use with the S3 Series panels. Remote annunciation requires the E3 Series A2 cabinet. (E3BB-BA2, E3BB-RA2) Network repeater card with twistedpair fiber connections require either an FML-E3 or an FSL-E3 card. Multi-mode fiber-optic card for one channel on the RPT-E3-UTP. Single-mode fiber-optic card for one channel on the RPT-E3-UTP. SLP motherboard For use with the replacement or the retrofit solutions. SLP 120VAC 7A power supply. For use with the replacement or the retrofit solutions. SLP Retrofit Kit for the 7100 B-Slim and IF602 panels. Includes the new door and the mounting plate. Requires the following: SLP-RB LCD-SLP SLC-PM/ FLPS-7-RB SLC95-PM SLP red cabinet with an inner door for the mounting display behind the plexiglass. Requires the following: SLP-RB LCD-SLP SLC-PM/ FLPS-7-RB SLC95-PM Remote Serial LCD Annunciator Remote Programmable Addressable Switch/LED Module Remote LED Driver Module 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Rev. D page 4 of 4

6 GFPS-9 Gamewell-FCI Power Supply 9 The Gamewell-FCI Power Supply 9 (GFPS-9) panel provides two (2) Class A, Style Z, or four (4) Class B, Style Y notification appliance circuits. Each circuit is rated at 3 amperes, with a total capacity of 9 amperes per panel. These circuits may be programmed to activate by groups or various combinations by connection to one (1) or two (2) existing Class A or B notification appliance circuits with operating voltages ranging from 9 to 30 VDC. Either noncoded or coded operation is possible. In addition, the GFPS-9 can provide a temporal pattern output from a noncoded input. A unique feature allows for programmable synchronized outputs for strobes by three (3) different major manufacturers, System Sensor, Faraday, or Gentex. The GFPS-9 contains its own battery charger capable of maintaining batteries of up to 35 AH. The cabinet provides space for a set of 7 A/H batteries. It is supervised for ground fault, over-current, open circuits and low battery conditions. These conditions light the appropriate trouble LED and automatically open the notification appliance circuit used for activation, transmitting a trouble signal to the main fire alarm control panel. The ground fault detection circuit may be disabled. Note: Larger batteries require a separate battery box. The unit contains a set of dry, Form C trouble actuated auxiliary contacts, rated VDC (resistive). Transfer of these contacts for AC power failure is programmable and can be delayed for a period of six (6) hours. This delay feature may be disabled. A power limited, non-resettable auxiliary power output up to three (3) amperes is also available. The panel can be programmed via DIP switch to disconnect this output from the batteries 30 seconds after AC power failure, in order to avoid running down the batteries from current devices such as door holders, etc. Features GFPS-9 UL Listed as a fire alarm accessory for use with any Gamewell-FCI or other UL Listed fire alarm controls Two (2) Class A (Style Z), or four (4) Class B (Style Y) notification appliance circuits Programmable temporal pattern output including ANSI S3.41 High current 9 amp. total output Integral strobe synchronization feature for strobes by three (3) manufacturers Integral ground fault detection Form C trouble contacts with delayed AC failure indication An ISO Company SIGNALING UL is a registered trademark of Underwriters Laboratories Inc. 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use by Honeywell International Inc. All rights reserved Rev. A2 page 1 of 2

7 Specifications Operating Power: 120 VAC, 3.6 amp. 60 Hz Standby Battery Circuit: 24 VDC (nominal) 7 ampere/ hours, max. Supervisory Current: amp. Alarm Current: amp. (excluding notification appliances) Alarm Output: 9.0 amp. 24 VDC (nominal) Dimensions: 16" H x 12.25" W x 3" D (40.64 x x 7.62 cm) Operating Temperature: 32 to 120 F (0 to 49 C) Relative Humidity: 10 to 86 F (non-condensing) Ordering Information Model GFPS-9 Gamewell-FCI Power Supply-9 GFPS-9RB 9A Power Supply Replacement PCB 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Rev. A2 page 2 of 2

8 7100 Series LCD-7100 Remote Serial LCD Display The LCD-7100 remote serial display provides superior flexibility to the 7100 or E3 Series installations. It features an 80-character display which duplicates all the information on the main display with the exception of menus. The LCD-7100 contains the following function keys: Alarm Acknowledge System Reset/Lamp Test Trouble Acknowledge System Drill Test Signal Silence A keylock must be placed in the ON position to enable the function keys with the exception of the Trouble Acknowledge key which is used to silence the trouble sounder on the LCD The LEDs on the LCD-7100 are listed as follows: Alarm System Silenced Supervisory NAC #1 Silenced System Trouble NAC #2 Silenced Power Fault Installation The LCD-7100 can be surface or flush-mounted on a standard four-gang electrical box and installed up to 3,000 feet (914.4 m) away from the main control. The 7100 or E3 Series control panels can accommodate up to five (5), remote LCD-7100 annunciators. Specifications Operating Voltage: 24 VDC (nominal) Supervisory Current:.012 amp. Alarm Current:.023 amp. Absolute Maximum Operating Temperature: 32 to 120 F (0 to 49 C) Relative Humidity: 0 to 93% max., non-condensing at 90 F (32 C) Dimensions: 8 1/4 L x 4 1/2 H x 1 7/8 D (21 x 11 x 4.5 cm) E3 Series is a registered trademark of Honeywell International Inc. Features Listed under UL Standard 864, 9th Edition Includes an 80-character alphanumeric LCD display Provides a full complement of function keys and LEDs Install in a remote location up to 3,000 feet (914.4 m) away from the control panel 7100 and E3 Series will accommodate up to five (5), annunciators Connect as a surface or flush-mount on a standard fourgang, electrical box Offers a compact, attractive design Ordering Information Part Number LCD-7100 SIGNALING An ISO Company FM MEA Approved LCD-7100 Remote Serial LCD Display APPROVED FDNY: S COA-# :0125 City of Chicago Approved City of Class 1 DENVER Class 2 Approved High Rise 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use by Honeywell International Inc. All rights reserved Rev. J page 1 of 1

9 MS-7AF, MS-7 and MS-7S The Gamewell-FCI MS-7 Style manual fire alarm stations are available in a wide variety of configurations. The Stations comply with the Americans with Disabilities Act (ADA) 5-lb. maximum pull force requirement. Operating instructions and Braille text are engraved in the handle. All stations have a key lock/reset which is keyed alike with Gamewell-FCI fire alarm control panels and other manual fire alarm stations. MS-7AF Velociti Addressable Station The MS-7AF Velociti Series addressable station is a double action station designed for installation in the signaling line circuit of Gamewell-FCI analog addressable control panels. Activation of the station causes its assigned address to register at the control panel. The door contains an LED which flashes green in normal condition and lights steady red when the station has been activated.* The station features screw terminals. MS-7ASF Velociti Addressable Station The MS-7ASF Velociti Series addressable station is a single action station designed for installation in the signaling line circuit of Gamewell-FCI analog addressable control panels. Activation of the station causes its assigned address to register at the control panel. The door contains an LED which flashes green in normal condition and lights steady red when the station has been activated.* The station features screw terminals. The Velociti Series stations use a communication protocol that substantially increases the speed of communication between the sensors and certain Gamewell-FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel s microprocessor stops the group poll and focuses on the single device. The net effect is response speed up to five times greater than earlier designs. MS-7 Double Action Station The MS-7 double action station is used with conventionalfire alarm control panels. It features a set of single pole contacts and screw terminals for connection to an initiating circuit. Velociti is a registered trademark of Honeywell International Inc. UL is a registered trademark of Underwriter s Laboratories Inc. LEXAN is a registered trademark of GE Plastics, a subsidiary of General Electric Company. Features Non-Coded, Manual Fire Alarm Stations An ISO Company SIGNALING S2465 MS-7 Addressable stations compatible with all Gamewell-FCI analog addressable fire alarm controls Conventional stations suitable for use with any UL Listed control panel Both single and double action stations available Tumbler lock for test and reset keyed alike with Gamewell-FCI controls Surface or semi-flush mounting Shock and vibration resistant Stations (MS-7LOB) Listed for outdoor applications Complies with ADA pull force requirements Only the red LED is operative in panels that do not operate in Velociti mode. FM MEA APPROVED Approved E Vol.VIII : Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use by Honeywell International Inc. All rights reserved Rev. B2 page 1 of 2

10 MS-7S Single Action Station The MS-7S single action station is used with conventional fire alarm control panels. It features a set of single pole contacts and wire leads for connection to an initiating circuit. MS-7SP Double Action Station The MS-7SP is a double action station similar to the MS-7 station, with the additional feature of both English and Spanish instructions molded into the unit. MS-7LOB Double Action Station (Listed for Outdoor Applications) The MS-7LOB station must be mounted on a Model SB-I/O backbox. In retrofit applications, the station is UL Listed for use with the WP-10 backbox. It is intended for use with conventional control panels and has a set of single pole contacts and screw terminals. Mounting The MS-7 interior stations may be surface mounted (use backbox SB-I/0) or semi-flush mounted on a standard double-gang, or 4-inch (10.2 cm) square electrical box. An optional trim ring (BG-TR) may also be used for semi-flush mounting. NYC-Plate The NYC-Plate provides the backplate for the manual pull station. (See Figure 1). Specifications Material: Lexan Contact Ratings: VAC/VDC (resistive) Dimensions: 5 5/8 H x 4 1/4 W x 1 1/4 D (14 x 10.1 x 3.2 cm) Operating Temperature (MS-7AF): 32 to 120 F (0 to 49 C) Relative Humidity (MS-7AF): 10 to 93% (non-condensing) Alarm Current:.0030 amp for LED Supervisory Current (MS-7AF): amps. Ordering Information Model MS-7 MS-7AF** MS-7ASF MS-7S MS-7SP MS-7LOB SB-I/O SB-10 BG-TR. NYC-Plate Double action station. Velociti addressable double action station. Velociti addressable single action station Single action station, wire leads. Double action station, English and Spanish instructions. Double action station, outdoor use. (Must use SB-I/O - Indoor/ outdoor use backbox). Indoor/outdoor use backbackbox. Surface backbox. Trim ring for semi-flush mount NYC backplate for manual pull station **For use with Gamewell-FCI analog addressable control panels only. Figure 1 NYC-Plate 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Rev. B2 page 2 of 2

11 Lower Current Draw!! Commander 3 Series Selectable Candela Evacuation Signals Applications The Commander 3 Series is a low profile strobe and horn/strobe combination that offers dependable audible and visual alarms and the lowest current available. GEC3/GES3 12&24VDC SERIES The GE3 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The 12VDC offers tamperproof field selectable candela options of 15, 30, 60, and 75 candela. The Commander 3 Series horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by using switches. The GE3 Series has a minimal operation current and has a minimum flash rate of 1Hz regardless of input voltage. The Commander 3 Series is shipped with the standard 4" metal mounting plate which incorporates the popular Super-Slide feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing. The Commander 3 also features the Checkmate - Instant Voltage Verification feature which allows the installer to check the voltage drop draw and match it to the blueprint. The GE3 Series appliances are ANSI/UL 464 and ANSI/UL 1971, listed for use with fire protective systems and are warranted for three years from date of purchase. Standard Features Nominal voltage 12VDC and 24VDC 24VDC units have field selectable candela options of 15, 30, 60, 75 & VDC units have field selectable candela options of 15, 30, 60 & 75 GEH horn is available in 12VDC or 24VDC Super-Slide Bracket - Ease of Supervision Testing Checkmate - Instant Voltage Verification Unit Dimensions: 5 high x 4.5 wide x 2.5 deep Synchronize strobe and/or horn with Gentex AVSM Control Module Prewire entire system, then install signals Lower installation and operating costs Input terminals 12 to 18 AWG Switch selection for high or low dba Switch for chime, whoop, mechanical and 2400Hz tone Tamperproof re-entrant grill Switch for continuous or temporal 3 (not available on whoop tone) Surface mount with the GSB (Gentex Surface Mount Box) Silence horn while strobes remain flashing Wide voltage range VDC (12VDC units) 16-33VDC or FWR (24VDC units) Faceplate available in red or off-white Product Listings ANSI/UL 464 & ANSI/UL 1971 Listed FM Approved CSFM: :122 (GEC3-24 & GEH-24) :123 (GES3-24) :129 (GES3-12) :130 (GEC3-12 & GEH-12) MEA: E (GEC3-24 & GES3-24) E (GEC3-12 & GES3-12) Product Compliance NFPA 72 Americans with Disabilities Act (ADA) Quality Management System is certified to: ISO 9001:2008

12 GEH 12VDC or 24VDC Low Profile Evacuation Horn Model Number Part Number Nominal Voltage Reverberant 10ft., per ANSI/UL 464 In Anechoic Room GEH12-R VDC GEH12-W VDC GEH24-R VDC GEH24-W VDC GES3 12VDC or 24VDC Selectable Candela, Low Profile Evacuation Strobe Model Number Part Number Nominal Voltage Candela (ANSI/UL 1971) GES3-12WR VDC 15, 30, 60, 75 GES3-12WW VDC 15, 30, 60, 75 GES3-24WR VDC 15, 30, 60, 75, 110 GES3-24WW VDC 15, 30, 60, 75, 110 Model Designations: W = Wall mount R = Red Faceplate W = White Faceplate All units are available in plain (no lettering). Plain units are non-returnable. ALERT bezel available AGENT bezel available GEC3 12VDC or 24VDC Selectable Candela, Low Profile Evacuation Horn/Strobe Model Part Nominal Candela Reverberant In Anechoic Room Number Number Voltage (ANSI/UL 1971) 10ft., per ANSI/UL ft. GEC3-12WR VDC 15, 30, 60, GEC3-12WW VDC 15, 30, 60, GEC3-24WR VDC 15, 30, 60, 75, GEC3-24WW VDC 15, 30, 60, 75, GE3 Product Strobe Current Ratings (ma) 12VDC ( Volts) 24VDC (16-33 Volts) Candela 12VDC UL Max 1 24VDC UL Max 1 15cd 106mA 92mA 30mA 42mA 30cd 131mA 141mA 35mA 60mA 60cd 186mA 260mA 66mA 97mA 75cd 237mA 312mA 80mA 116mA 110cd 103mA 157mA UP TO 30% Current Draw Reduction GE3-12 Product Horn Current Ratings Horn Mode Minimum 10ft., per UL 464 (HIGH) Minimum 10ft., per UL 464 (LOW) Regulated 12VDC Max. High Setting (ma) Temp Hz 76 69* 29 Temp 3 Mechanical 75 68* 26 Temp 3 Chime 62* 60* 13 Continuous 2400Hz 79 74* 29 Continuous Mechanical 78 72* 26 Continuous Chime 63* 61* 13 Whoop 78 71* 55 Horn Mode GE3-24 Product Horn Current Ratings Minimum 10ft., per UL 464 (HIGH) Minimum 10ft., per UL 464 (LOW) Regulated 24VDC Max. High Setting (ma) Temp Hz 78 71* 28 Temp 3 Mechanical 76 70* 25 Temp 3 Chime 70* 66* 15 Continuous 2400Hz 81 74* 28 Continuous Mechanical 80 72* 25 Continuous Chime 70* 66* 15 Whoop 82 69* 56 NOTES: Operating temperature: 32 to 120 F (0 to 49 C). The GE3 Series is not listed for outdoor use. The sound output for the temporal 3 tone is rated lower since the time the horn is off is averaged into the sound output rating. While the horn is producing a tone in the temporal 3 mode its sound pressure is the same as the continuous mode. For nominal and peak current across UL regulated voltage range for filtered DC power and unfiltered (FWR [Full Wave Rectified]) power, see installation manual. 12VDC models are DC only. Gentex does not recommend using a coded or pulsing signaling circuit with any of our strobe products (see Technical Bulletin 014). *Operating the horn in this mode at this voltage will result in not meeting the minimum UL reverberant sound level required for public mode fire protection service. These settings are acceptable only for private mode fire alarm use. Use the high dba setting for public mode application (not applicable when using the chime tone. The chime tone is always private mode). 1 RMS current ratings are per UL average RMS method. UL max current rating is the maximum RMS current within the listed voltage range (16-33VDC for 24VDC units) (8-17VDC for 12VDC units). For strobes the UL max current is usually at the minimum listed voltage (16VDC for 24VDC units) (8VDC for 12VDC units). For audibles the max current is usually at the maximum listed voltage. For unfiltered FWR ratings, see installation manual.

13 Mounting Super-Slide Tone Switch Locations SWITCH POSITION TONE Mechanical Temporal 3 ON ON ON Mechanical - Continuous OFF ON ON 2400Hz - Temporal 3 ON OFF ON 2400Hz - Continuous OFF OFF ON Chime - Temporal 3 ON ON OFF Chime - Continuous OFF ON OFF Whoop ON OFF OFF Whoop OFF OFF OFF Note: - Switch Positions 1 and 2 in the OFF position to select isolated horn and strobe power inputs - Switch Position 6 ON = HIGH dba - Switch Position 6 OFF = LOW dba Gentex Super-Slide Mounting Bracket: Allows the installer to pre-wire the system, test for system supervision, remove the signal head until occupancy, switch out Gentex signals without changing mounting brackets and has locking edge connector for snap-in-place installation. Die Cast Metal Mounting Plate: Mounts to single gang, double gang 4" square boxes or GSB box. Candela Selection Checkmate - Instant Voltage Verification The access holes are provided in the back of the terminal block to allow the voltage to be measured directly without removing the device. Typically this would be done at the end of the line to confirm design criteria. Most measurements will be taken using the S+ and S- locations although access is provided to other locations. NOTE: Care should be taken to not short the test probes. Conventional Wiring Diagrams for Emergency Notification Evacuation Series

14 GEC3/GES3 12 & 24 VDC SERIES Wiring Diagram GE3 Series with Gentex Synchronization Module Note: See Technical Bulletin 015 for proper synchronization module for application. Note: When synchronizing the GE3 12VDC Series, the AVSM synchronization module MUST be used. Architect & Engineering Specifications The audible and/or visible signal shall be Gentex GE3 Series or approved equal and shall be listed by Underwriters Laboratories, Inc. per UL 1971 and/or UL 464. The notification appliance shall also be listed with Factory Mutual Listing Service (FM), the California State Fire Marshal (CSFM) and the Bureau of Standards and Appeals (NYC). The notification appliance (combination audible/visible) shall produce a peak sound output of 100dBA or greater at 12VDC or 24VDC as measured in an anechoic chamber. The signaling appliance shall also have the capability to silence the audible signal while leaving the visible signal energized with the use of a single pair of power wires. Additionally, the user shall be able to select either continuous or temporal tone output with the temporal signal having the ability to be synchronized. Unit shall be capable of being installed so that any unauthorized attempt to change the candela setting will result in a trouble signal at the fire alarm control panel. The audible/visible and visible signaling appliance shall also maintain a minimum flash rate of 1Hz or up to 2Hz regardless of power input voltage. The appliance shall have an operating current of 55mA or less at 24VDC for the 15Cd strobe circuit and 106mA or less at 12VDC for the 15Cd strobe circuit. The appliance shall be polarized to allow for electrical supervision of the system wiring. The unit shall be provided with a mounting bracket with terminals and barriers for input/output wiring and be able to mount to a single gang or double gang box or double workbox without the use of an adapter plate. The unit shall have an input voltage range of volts with either direct current or full wave rectified power for 24VDC models or a voltage range of volts for 12VDC models. The appliance shall be capable of testing supervision without disconnecting wires. Also the appliance shall be capable of mounting to a surface back box. The unit shall also be able to verify voltage at the unit without removing unit. 24 units per carton 28 pounds per carton Important Notice: These materials have been prepared by Gentex Corporation ("Gentex") for informational purposes only, are necessarily summary, and are not purported to serve as legal advice and should not be used as such. Gentex makes no representations and warranties, express or implied, that these materials are complete and accurate, up-to-date, or in compliance with all relevant local, state and federal laws, regulations and rules. The materials do not address all legal considerations as there is inevitable uncertainty regarding interpretation of laws, regulations and rules and the application of such laws, regulations and rules to particular fact patterns. Each person's activities can differently affect the obligations that exist under applicable laws, regulations or rules. Therefore, these materials should be used only for informational purposes and should not be used as a substitute for seeking professional legal advice. Gentex will not be responsible for any action or failure to act in reliance upon the information contained in this material

15 Velociti Series ASD-PL2F, ASD-PTL2F and ASD-PL2FR The Gamewell-FCI Velociti Series, analog addressable plug-in smoke sensors with integral communication provide features that surpass conventional sensors. Sensitivity can be programmed in the control panel software, and is continuously monitored and reported to the panel. Point ID capability allows each sensor s address to be set, providing exact locations for selective maintenance when the chamber contamination reaches an unacceptable level. The ASD-PL2F photoelectric sensor s unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. Dual electronic thermistors add 135 F (57 C) fixed-temperature thermal sensing on the ASD-PTL2F model. The Velociti Series use a communication protocol that substantially increases the speed of communication between the sensors and certain Gamewell-FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel s microprocessor stops the group poll and concentrates on the single device. The net effect is a response speed up to five times greater than earlier designs. Ordering Information Model ASD-PL2F Analog, addressable photoelectronic smoke sensor ASD-PTL2F Analog, addressable photoelectronic smoke sensor with thermal sensing ASD-PL2FR Analog, addressable photoelectronic smoke sensor used with the DNR duct base when the remote test is required. Analog, Addressable Photoelectronic Smoke Sensor ASD-PL2F/ASD-PTL2F Features Sleek, low-profile design Visual rotary, decimal switch addressing (01-159) Built-in functional test switch activated by an external magnet Bicolor LEDs flash green whenever the sensor is addressed, and light steady red on alarm* Optional relay, isolator, or sounder bases Low standby current Analog addressable communication Stable communication technique with noise immunity Optional remote, single-gang LED Indicator (RA400Z) Compatible with Gamewell-FCI analog addressable panels Note: *Only the red LED is operative in panels that do not operate in Velociti mode. An ISO Company SIGNALING ASD-PL2FR Velociti is a registered trademark of Honeywell International Inc. UL is a registered trademark of Underwriters Laboratories Inc. S1913 FM APPROVED MEA Approved E Vol.VI : Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use by Honeywell International Inc. All rights reserved Rev. H page 1 of 2

16 Installation ASD-PL2F plug-in sensors use a separate base to simplify installation, service, and maintenance. A special tool allows maintenance personnel to plug-in and remove sensors without using a ladder. Mount the base on a box which is at least 1.5" (3.8 cm) deep. Suitable mounting base boxes include: 4.0" (10.2 cm) square box 3.5" (8.9 cm) or 4.0" (10.2 cm) octagonal box Single-gang box (except relay or isolator bases) With B200SR base, mounted on a 4.0" (10.2 cm) square box With B224RB or B224BI base, mounted on a 3.5" (8.9 cm) octagonal box, or a 4.0" (10.2 cm) octagonal or square box NOTE: Because of the inherent supervision provided by the SLC, end-of-line resistors are not required. Wiring T-taps or branches are permitted for Style 4 (Class B ) wiring. Sensor Spacing Gamewell-FCI recommends that the spacing sensors be used in compliance with NFPA 72. Specifications Size: 2.1 (5.1 cm) high x 4.1 (10.4 cm) diameter installed in the B501 base, 6.1 (15.5 cm) diameter installed in the ADB-FL base. Shipping Weight: 5.2 oz. (147 g) Operating Temperature: ASD-PL2F: 32 F to 120 F (0 C to 49 C) ASD-PTL2F: 32 F to 100 F (0 C to 38 C) UL -Listed Velocity Range: ft./min. (1,219.2 m/min.), suitable for installation in ducts. Relative Humidity: 10-93% (non-condensing) Thermal Ratings: Fixed-temperature setpoint 135 F (57 C) Electrical Specifications Voltage Range: volts DC peak Standby Current: (max. avg.): VDC (one communication every 5 seconds with LED enabled) Maximum Alarm Current: VDC (LED) lit). Bases and Options ADB-FL B200SR 6.1 (15.5 cm) diameter (17.46 cm) Base Diameter 2.0 (5.08 cm) Base Height B224RB Relay Base Screw terminals: Up to 14 AWG (2.0 mm 2 ) Relay type: Form-C Rating: 30 VDC resistive; VDC inductive; VDC inductive. Dimensions: 6.2 x 1.2 (15.7 x 3.0 cm) Maximum: 25 devices between isolator bases. RA400Z Remote alarm indicator, LED. BCK-200 Black detector covers (box of 10) DNR Duct smoke housing 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Rev. H page 2 of 2

17 Velociti Series ATD-L2F, ATD-RL2F The Gamewell-FCI Velociti Series, addressable plug-in thermal sensors with integral communication provide features that surpass conventional sensors. Point ID capability allows each sensor s address to be set, providing exact locations for pinpointing alarm locations and for selective maintenance. ATD thermal sensors use an innovative thermistor sensing circuit to produce 135 F/57 C fixed-temperature (ATD-L2F). The ATD-RL2F provides a combination 15 /minute rate-of-rise with 135 fixed thermal detection that is included in a low-profile package. The ATD-HL2F provides fixed high-temperature detection at 190 F/88 C. These thermal sensors provide cost-effective, addressable property protection in a variety of applications. The Velociti Series uses a communication protocol that substantially increases the speed of communication between the sensors and Gamewell-FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel s microprocessor stops the group poll and concentrates on the single device. The net effect is response speed up to five times greater than earlier designs. Installation ATD plug-in sensors use a separate base to simplify installation, service, and maintenance. A special tool allows maintenance personnel to plug-in and remove sensors without using a ladder. Mount the base on a box which is at least 1.5" (3.8 cm) deep. Suitable mounting base boxes include: 4.0" (10.2 cm) square box. 3.5" (8.9 cm) or 4.0" (10.2 cm) octagonal box. Single-gang box (except relay or isolator base). With B200SR base, mounted on a 4.0" (10.2 cm) square box. With B224RB or B224BI base, mounted on a 3.5" (8.9 cm) octagonal box, or a 4.0" (10.2 cm) octagonal or square box. NOTE: Because of the inherent supervision provided by the SLC, end-of-line resistors are not required. Wiring Ttaps or branches are permitted for Style 4 (Class B ) wiring. Velociti and E3 Series are registered trademarks of Honeywell International Inc. UL is a registered trademark of Underwriters Laboratories Inc. ULC is a registered trademark of Underwriters Laboratories Canada Inc. Features Addressable Thermal Sensor ATD-L2F Sleek, low-profile design Visual rotary switch addressing Built-in functional test switch activated by an external magnet Bicolor LEDs flash green whenever the sensor is addressed, and light steadily red on alarm* Optional relay, isolator, or sounder bases Low standby current Addressable communication Stable communication technique with noise immunity Optional remote, single-gang LED accessory (RA-400Z) Suitable for installation in ducts Note: *Only the red LED is operative in panels that do not operate in Velociti mode. An ISO Company SIGNALING S2332 FM APPROVED MEA Approved E Vol.VI : Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use by Honeywell International Inc. All rights reserved Rev. D page 1 of 2

18 Specifications Size: 2.1" (5.3 cm) high x 4.1" (10.4 cm) diameter installed in B501 base, 6.1" (15.5 cm) diameter installed in the ADB-FLF base Shipping Weight: 4.8 oz. (137 g) Operating Temperature: ATD-L2F or ATD-RL2F 4 F to 100 F ( 20 C to 38 C) ATD-HL2 4 F to 150 F ( 20 C to 66 C) Sensor Spacing: UL approved for 50 ft. (15.2 m) center to center FM approved for 25 x 25 ft. (7.6 x 7.6 m) spacing Relative Humidity: 10 93% (non-condensing) ATD-L2F Fixed-temperature setpoint 135 F (57 C) ATD-RL2F Combination 135 F fixed temperature and 15 (8.3 c) per minute rate-of-rise ATD-HL2F Fixed-temperature setpoint 190 F (88 C) Electrical Specifications Voltage Range: Standby Current: (max. avg.) LED Current (max.) Voltage Range volts DC peak VDC (without communication) VDC (one communication every 5 seconds with LED enabled) VDC (LED lit) volts DC peak Specifications Bases and Options ADB-FLF 6.1 (15.5 cm) diameter standard base B (10.4 cm) diameter flangeless base B200SR Standard Sounder base, UL 864 9th Edition compliant, ULC Listed Diameter: (17.46 cm) B224RB Relay Base Up to 14 AWG (2.0 mm 2 ) Relay type: Form-C Rating: 30 VDC resistive VDC inductive VDC inductive B224RB Relay Base Dimensions: 6.2 (15.7 cm) x 1.2 (3.0 cm) B224BI Isolator Base Dimensions: 6.2 (15.7 cm) x 1.2 (3.0 cm) Maximum 25 devices between isolator bases RA-400Z Remote alarm indicator, LED BCK-200 Black detector covers (box of 10) Ordering Information Model ATD-L2F ATD-RL2F ATD-HL2F Addressable thermal sensor, fixed, 135 F Addressable thermal sensor, combination fixed,135 F and 15 /minute rate-of-rise. Addressable thermal sensor, fixed, 190 F 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Rev. D page 2 of 2

19 Velociti Series B200S The B200S Velociti sounder bases sets a new standard for performance, installation, and aesthetics. The B200S is designed for new and existing dwelling unit applications. It offers maximum flexibility in installation, configuration, and operation to meet or exceed the UL Standard 268 and UL Standard 464 requirements. One of the unique features of the B200S sounder base offers the functionality to capture the communications transmitted between the attached sensor head on the System Sensor signal line loop of the E3 Series or S3 Series fire alarm control panel. This new feature allows the E3 Series and S3 Series fire alarm control panels to use the same address as the detector, but use a unique device type on the loop. Using the CAMWorks Tool, the E3 Series and S3 Series control panels can then use that same address to command and activate an individual sounder or a group of sounders. In CAMWorks, you can program the command set from the E3 Series or S3 Series control panel to a specific event which allows you to select the volume, tone and group. In addition, the E3 Series and S3 Series control panels generate synchronization pulses through the loop and enables selectable tone patterns. With its attractive aesthetics, the B200S is ideal to use for applications where the appearance is critical. For example, the design eliminates unsightly surface-mount boxes and the sounder base employs a separate mounting plate that can be installed on various junction box sizes. In addition, the mounting plate enables pre-wiring of all connections to simplify the installation. The housing is installed with the mounting plate and is locked in position with two retaining screws. The retaining screws are covered by the installed sensor head for added tamper resistance. E3 Series and Velociti are registered trademarks and CAMWorks is a trademark of Honeywell International Inc. UL is a registered trademark of Underwriters Laboratories Inc. Features SIGNALING S1911 Intelligent Addressable Sensor Sounder Base Built-in supervision (no EOL relays required). Complies with UL Standard 268 and UL Standard 464. Offers a programming option to control and activate the sounder base independently. Programs the addressability for maximum configuration flexibility. Broadcasts over two volume levels(75 or 85dBA). Has multiple event-driven tone outputs and uses custom tone capability. Supports Continuous, ANSI Temporal 3, ANSI Temporal 4, and March Time tones. - Employs coded patterns that may be optionally synchronized over the SLC and promptly changed. Synchronized with other System Sensor notification devices. Includes a pre-wire mounting plate that fits various junction box sizes. Uses a mechanical locking feature that prevents the removal of the attached sensor head. FM B200S APPROVED : Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use by Honeywell International Inc. All rights reserved Rev. B page 1 of 2

20 Specifications Physical Specifications: Base Diameter: (17.46 cm) Base Height: 2.0 (5.08 cm) less sensor Shipping Weight: 0.50 lb. (227 gm) Operating Temperature Range: 32 to 120 F (0 to 49 C) Operating Humidity Range: 10% to 93% relative humidity (non-condensing) Electrical Specifications: External Supply Voltage: 16 to 33 VDC (VFWR) External Standby Current: 500 µa maximum Alarm Current: 35 ma maximum (high volume) 15 ma maximum (low volume) SLC Operating Voltage: 15 to 32 VDC SLC Standby Current: 300 µa maximum Sound Output: Greater than 85 dba minimum measured in a UL reverberant room at 10 ft. 24 Volts (in continuous tone). Installation Specifications: Mounting: Wire: Mounts directly to 4 (10.16 cm) square, 4 (10.16 cm) octagon, 3 1/2 (8.9 cm) octagon, singlegang or double-gang junction boxes. Wire sizes up to 12 AWG. Ordering Information Part Number B200S Intelligent Addressable Sensor Sounder Base Note: The B200S sounder base is compatible with the E3 Series and S3 Series fire alarm control panels. Use the B200SR with the 7100, 602 Series or Gamewell and FCI (Legacy) panels. For information on the B200SR, refer to the BS00SR Data Sheet (P/N: ). 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Rev. B page 2 of 2

21 Velociti Series B200S-LF The Gamewell-FCI, B200SR-LF sounder base sets a new standard for performance, installation and aesthetics. The B200S-LF low frequency sounder base is designed to comply with the NFPA 72 sleeping space requirement to produce a fundamental frequency of 520 Hz +/- 10% with a square wave or its equivalent. Studies show that a lower frequency, centered around 520 Hz, is the ideal frequency to awaken sleeping occupants, even those occupants with mild to severe hearing loss. In addition, it offers maximum flexibility in installation, configuration and operation to comply or exceed the UL Standards 268 and 464 requirements. The sounder base listens in to the communication between the sensor head and the fire alarm control panel to use the same address as the detector, but uses a unique device type on the loop. The FACP can then use that same address to command an individual sounder or a group of sounders to activate. You can set the command from the panel, so that it is set to the specific event, allowing the selection of volume, tone, group or custom tone patterns. Installation The sounder base offers the following installation features: Pre-wired mounting plate-fits various junction box sizes. The housing locks to a mounting plate with two retaining screws to prevent tamper resistance. Specifications Physical Specifications: Base Diameter: 6.875½ (17.46 cm) Base Height: 2.0½ (5.08 cm) less sensor Shipping Weight: 0.50 lb. (227 gm) Operating For the applicable sensor Temperature Range: Operating Temperature Range, refer to the Base/Sensor Cross Reference Chart at Operating Humidity 10% to 93% relative humidity Range: (non-condensing) Electrical Specifications: External Supply Voltage: 16 to 33 VDC (VFWR) External Standby Current: 500 µa maximum Alarm Current: High Volume Setting: Low Volume Setting: SLC Operating Voltage: SLC Standby Current: Sound Output: High Volume: Low Volume: 70 ma 33.0 VDC 90 ma 24.0 VDC 140 ma 16.0 VDC 15 ma 33.0 VDC 20 ma 24.0 VDC 25 ma 16.0 VDC 15 to 32 VDC 300 µa maximum (base only) Greater than 85 dba minimum measured in a UL reverberant room at 10 ft. 24 Volts (in continuous tone). Greater than 75 dba minimum measured in a UL reverberant room at 10 ft. 24 Volts (in continuous tone) Features Low Frequency Intelligent Sounder Base Complies with UL Standard 464 for 520 Hz. low frequency. Complies with UL Standard 268. Supports 520 Hz +/- 10% square wave tone. Includes a tone selection via an onboard jumper. Compatible with the B501BH-Series sounder base installations. Includes a pre-wire mounting plate that fits various junction box sizes. Offers a mechanical locking feature that prevents the removal of an attached sensor head. Ordering Information Part Number B200S-LF B200S-LF Low Frequency Intelligent Addressable Sensor Sounder Base Note: The B200S-LF sounder base is compatible with the E3 Series and S3 Series fire alarm control panels. E3 Series is a registered trademark and the S3 Series is a trademark of Honeywell International Inc. UL is a registered trademark of Underwriters Laboratories Inc. SIGNALING S Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use by Honeywell International Inc. All rights reserved Rev. A page 1 of 1

22 InnovairFlex Series DNR/DNRW Duct Smoke Housing The InnovairFlex Series, DNR intelligent, non-relay photoelectric duct smoke detector, and the DNRW watertight, non-relay photoelectric duct smoke detector feature a pivoting housing that fits both square and rectangular footprints. These detectors are capable of mounting to a round or rectangular duct. The DNR/DNRW detectors can be used with the E3 Series and 7100 Series Systems. Note: The InnovairFlex Series, DNR requires the Velociti Series, ASD-PL2FR Sensor and AOM-2RF, if relays are required for the fan control. The DNRW duct smoke detector, with its NEMA 4 rating, is Listed as a watertight enclosure providing protection against falling dirt, rain, and windblown dust, splashing and hose directed water. These features allow operators to use the detector in the most extreme environments. The units sense smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of -4 F to 158 F, and a humidity range of 0 to 95 percent (non-condensing). An improved cover design isolates the sensor head from the low-flow feature for simple maintenance. A cover tamper feature was added to indicate a trouble signal for a removed or improperly installed sensor cover. The InnovairFlex housing provides a 3/4-inch conduit knockout and ample space to facilitate easy wiring and mounting of the relay module. The InnovairFlex duct smoke detector can be customized to meet local codes and specifications without additional wiring. The new InnovairFlex product line is compatible with all previous Innovair models, including remote test accessories. WARNING:Duct smoke detectors have specific limitations. DUCT SMOKE DETECTORS ARE: NOT a substitute for an open area smoke detector, NOT a substitute for early warning detection, and NOT a replacement for a building s regular fire detection system. Refer to NFPA 72 and 90A for additional duct smoke detector 2911 application information. Intelligent Non-Relay Photoelectric Duct Smoke Housing InnovairFlex-DNR/DNRW Features Photoelectric, integrated low-flow technology Air velocity rating from 100 ft/min to 4,000ft/min (0.5m/s to 20.32m/sec) Versatile mounting options: square or rectangular configuration Broad ranges for operating temperature (-4 F to 158 F) and humidity (0% to 95% non-condensing) Patented sampling tube installs from front or back of the detector with no tools required New Cover tamper signal Increased wiring space with a newly added 3/4-inch conduit knockout Available space within housing to accommodate the mounting of the relay module Easily accessible code wheels on sensor head (sold separately) Clear cover for convenient visual inspection UL 268A Listed Remote testing capability Requires SLC line power only NEMA Type 4 UL Listed for non-hazardous indoor and outdoor applications (DNRW only) UV Resistant, UL Listed housing and cover material (DNRW only) An ISO Company SIGNALING E3 Series and Velociti are registered trademarks and InnovairFlex is a trademark of Honeywell International, Inc. UL is a registered trademark of Underwriters Laboratories Inc. 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use by Honeywell International Inc. All rights reserved Rev. C page 1 of 4 S911 FM APPROVED MSFM :209 S911

23 Architectural/Engineering Specifications The air duct smoke detector shall be a System Sensor InnovairFlex DNR Intelligent Non-Relay Photoelectric Duct Smoke Detector and DNRW Watertight NEMA4 Duct Smoke Detector. The detector housing shall be UL Listed per UL 268A specifically for use in air handling systems. The flexible housing of the duct smoke detector fits both square and rectangular footprints. The detector shall operate at air velocities of 100 ft/min to 4,000 ft/min (0.5 m/sec to m/ sec). The unit shall be capable of providing a trouble signal in the event that the sensor cover is removed or improperly installed. It shall be capable of local testing via magnetic switch or remote testing using the RTS151KEY remote test station. Terminal connections shall be of the strip and clamp method suitable for AWG wiring. Physical Specifications Size: Rectangular Dimensions: Square Dimensions: Weight: Environmental Rating: Operating Temperature Range: Storage Temperature Range: Operating Humidity Range: Air Duct Velocity: DCOIL - (if included) in (37 cm) Length; 5 in (12.7 cm) Width; 2.5 in (6.6 cm) Depth 7.75 in (19.7 cm) Length; 9 in (22.9 cm) Width; 2.5 in (6.35 cm) Depth 1.6 lb (0.73 kg) NEMA4 (DNRW only) 4 to 158 F ( 20 to 70 C) 22 to 158 F ( 30 to 70 C) 0% to 95% relative humidity non-condensing 100 to 4000 ft/min (0.5 to m/sec) VDC.95mA max. Electrical Ratings For information on the electrical specifications, refer to the InnovairFlex DNR Duct Smoke Detector Installation Instructions, P/N I R. Accessory Current Loads at 24 VDC Device Standby Trouble RA100Z 0 ma 12 ma Max. RTS151/RTS151KEY 0 ma 12 ma Max. Installing the InnovairFlex Sampling Tube The InnovairFlex sampling tube may be installed from the front or back of the detector. The tube locks securely into place and can be removed by releasing the front or rear locking tab. (Figure 3 illustrates the front locking tab). Figure 1 Figure 2 Figure 3 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Rev. C page 2 of 4

24 Wiring for Intelligent Non-Relay Duct Smoke Detector Figure 4 System Wiring Diagram for DNR RA100Z Figure 5 DNR to RA100Z DNR TO RTS451/RTS451KEY/RTS151/ RTS151KEY WITH R REMOTE TEST CAPABLE DETECTOR HEAD OPTION: TEST COIL + TEST COIL - COMM + OUT (CONV ONLY) + COMM - RA/RTS - RA + RTS + RTS451/RTS451KEY RTS151/RTS151KEY JUMPER TEST COIL + TEST COIL - COMM + OUT (CONV ONLY) + COMM RA/RTS RA + RTS + EXTERNAL (-) POWER (+) SUPPLY RT151/RTS151KEY REMOTE TEST STATION LED OPTION 1 PER UNIT TEST COIL OPTION 1 PER UNIT 95mA CURRENT DRAW Figure 6 DNR to RTS151/RTS151 Key Important Notes: The use of either RTS151 or RTS151KEY requires the installation of an accessory coil, DCOIL, sold separately. For additional information, refer to the DNR or DNRW Duct Smoke Detector Installation Instructions, P/N I R and the Duct Application Smoke Detectors Application Guide. The RTS151/RTS151KEY test coil circuit requires an external 24 VDC power supply which must be UL Listed. 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Rev. C page 3 of 4

25 Accessories System Sensor provides system flexibility with a variety of accessories, including two remote test stations and different means of visible and audible system annunciation. As with our duct smoke detectors, all duct smoke detector accessories are UL Listed. Figure 7 RTS151 UL S2522 Figure 8 RTS151KEY UL S2522 Figure 9 RA100Z UL S2522 Figure 10 ASD-PL2FR Ordering Information Part Number DNR Intelligent non-relay photoelectric low-flow duct smoke detector DNRW Watertight intelligent non-relay photoelectric low-flow duct smoke detector ASD-PL2FR Intelligent photoelectric smoke sensor with remote test capability in duct applications Accessories Part Number DCOIL Remove test coil required with RTS151/RTS151151KEY DST1 Metal sampling tube duct width up to 1 ft (0.3m) DST1.5 Metal sampling tube duct widths 1 ft to 2 ft (0.3 to 0.6 m) DST1.5 Metal sampling tube duct widths 1 ft to 2 ft (0.3 to 0.6 m) DST3 Metal sampling tube duct widths 2 ft to 4 ft (0.6 to 1.2 m) DST5 Metal sampling tube duct widths 4 ft to 8 ft (1.2 to 2.4 m) DST10 Metal sampling tube duct widths 8 ft to 12 ft (2.4 to 3.7 m) DH400OE-1 Weatherproof enclosure ETX Metal exhaust tube duct width 1ft (0.3m) M Test magnet P End cap for metal sampling tubes RA100Z/RA100ZA Remote annunciator alarm LED RTS151 Remote test station RTS151KEY Remote test station with key lock 12 Clintonville Road, Northford, CT USA Tel: (203) Fax: (203) Rev. C page 4 of 4

26 DH Series Electromagnetic Door Holders Features Very low current draw. Superior holding force and low residual magnetisms. Durable die-cast metal. Gamewell s DH Series of electromagnetic fire door holders are constructed of durable die-cast metal finished in high-lustre double chrome or brass plating. Other features inclued standard dual-voltage AC and DC inputs of 24 and 120 volts (standard), as well as 12 and 24 volts and at 24 and 220 volts models. While reducing stocking requiements, the 24 and 120 volts model draws only ma at 24 VDC, lowering overall job costs. Other features include single or double-coil floor mounting, surface mounting and direct wall mounting. No brackets are required. The DH Series door holders offer installation using an adhesive template assuring alignment without secondary adjustments. Accessories include extension and misalignment rods (various lengths) for correct alignment between door and wall at distances greater than 12.0" (30.48 cm) and misalignment over 4.0" (10.16 cm). The aircraft-quality DH drill fixture reduces installation time and provides a near-perfect alignment of catch-plate and armature. Basic units offer superior holding force and low residual magnetism. Models working at 12 and 24 volts and at 24 and 120 volts can operate at higher listed voltages, producing holdng forces in excess of 100 pounds (45.3 kg) for special applications. g2282ph1.jpg High lustre double chrome or brass plating. Dual-voltage AC or DC inputs. Terminal block connections. Single-or double-coil floor, furface, and direct mounting (no brackets required). Aircraft-quality DH drill fixture available to reduce installation time and costs. Extension and misalignment rods. Listings Listings and approvals below apply to the DH Series Electromagnetic Door Holders. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status. UL Listed: Standard Application Gamewell s electromagnetic DH Series door holders are designed to hold self-closing swinging doors open until energized by a remote sensing device responding to smoke, heat, or flames, alarm systems, or a switch. When de-energized, the door holder releases the door, enabling it to swing closed to check the spread of smoke, heat, or flames. The door holder can also be used in other remote door-closing applications as well. The units are recommended for automatic area protection against smoke, heat, or flames in schools, hospitals, nursing homes, offices, and other public buildings of all kinds. Gamewell s DH Series of electromagnetic door holders are specially engineered for easy connection to dectectors, sensors, alarm systems, and annunciators. DH Series CS-2482 A1 Page 1 of 2

27 Electrical/Mechanical Specifications Voltage DC/mA AC/mA Terminals LB. KG. 12 V Common & Low Voltage V Com mon & High Voltage V Common & Low Voltage V Com mon & High Voltage V Common & Low Voltage V Com mon & High Voltage V Common & Low Voltage V Common & Low Voltage NOTE: Holding forces listen in above table correspond with shaded values; non-shaded values are slightly less. HIGH HOLDING FORCE/SPECIAL APPLICATIONS: To obtain performance values in talbe above, apply high voltage to low voltage terminals (C & L). This configuration can only be applied to 12 & 24 volts and 24 & 120 volts m odels. Ordering Information Door holders: DH-FC1 DH-FB1 DH-SC1 DH-SB1 DH-GC1 DH-GB1 DH-GC2 DH-GB2 Extensions: DHE1C DHE1B DHE15C DHE15B DHE2C DHE2B DHE3C DHE3B DHE4AC DHE4AB Door holder, semi-flush, chrome. Door holder, semi-flush, brass. Door holder, surface mount, chrome. Door holder, surface mount, brass. Door holder, ground mount, single-door, chrome. Door holder, ground mount, single-door, brass. Door holder, ground mount, double-door, chrome. Door holder, ground mount, double-door brass. 1" (2.54 cm) Extensions rod, chrome. 1" (2.54 cm) Extension rod, brass. 1" (2.54 cm) Extension rod, chrome. 1" (2.54 cm) Extension rod, brass. 2" (5.08 cm) Extension rod, chrome. 2" (5.08 cm) Extension rod, brass. 3" (7.62 cm) Extension rod, chrome. 3" (7.62 cm) Extension rod, brass. 4" (10.16 cm) Adjustable extension rod, chrome. 4" (10.16 cm) Adjustable extension rod, brass. Accessories: DHCP DHCPB DHSBC DHSBB DHBBC DHBBB DHW DHDF Catch plate, chrome. Catch plate, brass. Swivel base, chrome. Swivel base, brass. Back box, chrome. Back box, brass. Extension wrench. (2 pieces) Swivel base mounting drill fixture. Gamewell-FCI 12 Clintonville Road Northford, CT Phone: Fax: A Honeywell Company 2009 Gamewell-FCI Specifications and wiring information are provided for information only and are believed to be accurate. Gamewell-FCI assumes no responsibility for their use. Data and design are subject to change without notice. Installation and wiring instructions shipped with the product shall always be used for actual installation. For more information, contact Gamewell-FCI. Page 2 of 2 DH Series CS-2482 _A1

NetSOLO Broadband. Voice Evacuation. Intelligent, Networked, Multi-Channel Fire Alarm Control and Emergency Voice Evacuation System

NetSOLO Broadband. Voice Evacuation. Intelligent, Networked, Multi-Channel Fire Alarm Control and Emergency Voice Evacuation System Voice Evacuation NetSOLO Broadband Intelligent, Networked, Multi-Channel Fire Alarm Control and Emergency Voice Evacuation System General The NetSOLO Broadband is a revolutionary advance in fire detection

More information

E3 Series Broadband System

E3 Series Broadband System Broadband System Description The, Broadband System includes the NetSOLO Broadband System. Like the Net- SOLO Broadband System, the Broadband is of modular design and allows a wide range of configurations

More information

E3 Series Broadband System

E3 Series Broadband System Voice Evacuation E3 Series Broadband System Intelligent, Networked, Multi-Channel Fire Alarm Control and Emergency Voice Evacuation System General The, E3 Series Broadband System is a modular design and

More information

Addressable Fire Alarm Control Panel

Addressable Fire Alarm Control Panel PRODUCT SPECIFICATION XR2400F Addressable FACP Addressable Fire Alarm Control Panel Description The DMP XR2400F Addressable Fire Alarm Control Panel is an expandable Fire Alarm Control with built-in DACT

More information

E3 Series Broadband. Description. Features. Intelligent, Networked, Multi-Channel Fire Alarm Control and Emergency Voice Evacuation System

E3 Series Broadband. Description. Features. Intelligent, Networked, Multi-Channel Fire Alarm Control and Emergency Voice Evacuation System Broadband Description Intelligent, Networked, Multi-Channel Fire Alarm Control and Emergency Voice Evacuation System The Broadband System includes the Net- SOLO Broadband System. Like the NetSOLO Broadband

More information

L-Series, Emergency Communication Devices

L-Series, Emergency Communication Devices Notification Appliances L-Series, Emergency Communication Devices Description The L-Series Emergency Communications devices and accessories combine application versatility with all of the same time-saving

More information

Version /17. Honeywell Gamewell-FCI Honeywell Security and Fire 12 Clintonville Road Northford, CT 06472

Version /17. Honeywell Gamewell-FCI Honeywell Security and Fire 12 Clintonville Road Northford, CT 06472 HONEYWELL GAMEWELL-FCI GWF-7075 (75 detectors and 75 modules) CONTROL COMMUNICATOR SYSTEM USING SYSTEM SENSOR PROTOCOL ENGINEER/ARCHITECT SPECIFICATION Version 1.00 10/17 Honeywell Gamewell-FCI Honeywell

More information

DATA SHEET CYBERCAT 254 INTELLIGENT FIRE ALARM CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D

DATA SHEET CYBERCAT 254 INTELLIGENT FIRE ALARM CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D DATA SHEET CYBERCAT 254 INTELLIGENT FIRE ALARM CONTROL SYSTEM DESCRIPTION Fike s CyberCat 254 (P/N 10-066) is a state-of-the-art true intelligent digital peer-to-peer modular fire alarm control system.

More information

TrueAlert Addressable Notification Appliances

TrueAlert Addressable Notification Appliances UL, ULC Listed* TrueAlert Addressable Notification Appliances Audible/Visible Notification Appliances; Multi-Tone Horn/Strobe with 520 Hz Output Features Individually addressed and controlled multi-tone

More information

CHEETAH XI INTELLIGENT SUPPRESSION CONTROL SYSTEM

CHEETAH XI INTELLIGENT SUPPRESSION CONTROL SYSTEM CHEETAH XI INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION Fike s Cheetah Xi (P/N 10-068) is a state-of-the-art true intelligent digital peer-topeer modular suppression control system. It is ideal for

More information

L-Series, Indoor Strobes and Horn Strobes

L-Series, Indoor Strobes and Horn Strobes Notification Appliances L-Series, Indoor Strobes and Horn Strobes Indoor Selectable-Output Strobes/Horn Strobes for Ceiling Applications General The L-Series audible visible notification products offer

More information

NetSOLO Classic. Voice Evacuation. Intelligent, Networked, Multi-Channel and Bulk Amplification Voice Evacuation System FEATURES & BENEFITS.

NetSOLO Classic. Voice Evacuation. Intelligent, Networked, Multi-Channel and Bulk Amplification Voice Evacuation System FEATURES & BENEFITS. Voice Evacuation NetSOLO Classic Intelligent, Networked, Multi-Channel and Bulk Amplification Voice Evacuation System General The NetSOLO Classic System is a revolutionary advance in emergency voice evacuation

More information

Product Guide Specification

Product Guide Specification Gamewell-FCI May 2013 Honeywell Fire Systems 12 Clintonville Road Northford, Connecticut 06472-1653 Phone (203) 484-7161 Fax (203) 484-7118 Website www.gamewell-fci.com Product Guide Specification Specifier

More information

DATA SHEET CHEETAH XI 50 INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D

DATA SHEET CHEETAH XI 50 INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION APPROVALS: SYSTEM OPERATION. Form No. D DATA SHEET CHEETAH XI 50 INTELLIGENT SUPPRESSION CONTROL SYSTEM DESCRIPTION Fike s Cheetah Xi 50 (P/N 10-071) is a state-of-the-art true intelligent digital peer-to-peer modular suppression control system.

More information

TrueAlert Addressable Notification Appliances

TrueAlert Addressable Notification Appliances UL, ULC, CSFM Listed, FM Approved TrueAlert Addressable Notification Appliances Audible/Visible Notification Appliances, Wall Mount Multi-Candela Horn/Strobe, Model Series 49AV Features Individually addressed

More information

SECTION FIRE ALARM SYSTEMS

SECTION FIRE ALARM SYSTEMS SECTION 16721 FIRE ALARM SYSTEMS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. The general provisions of the contract including General and Special Conditions and General Requirements shall apply to all work

More information

L-Series, Indoor Strobes and Horn Strobes

L-Series, Indoor Strobes and Horn Strobes Notification Appliances L-Series, Indoor Strobes and Horn Strobes Indoor Selectable-Output Horns, Strobes and Horn Strobes for Wall Applications General The L-Series audible visible notification products

More information

AL802ULADA. NAC Power Extender. Installation Guide. (See Application Guide for additional information) Rev

AL802ULADA. NAC Power Extender. Installation Guide. (See Application Guide for additional information) Rev AL802ULADA NAC Power Extender Installation Guide (See Application Guide for additional information) Rev. 031703 Overview: The Altronix AL802ULADA is an extremely cost effective 8 amp voltage regulated

More information

TrueAlert Notification Appliances

TrueAlert Notification Appliances TrueAlert Notification Appliances UL Listed; FM, CSFM and MEA (NYC) Approved* Non-Addressable Audible/Visible Notification Appliances with SmartSync Operation of Strobes and Horns Features Wall mount audible/visible

More information

CONVENTIONAL FIRE ALARM CONTROL UNITS. MR-2300 SERIES Fire Alarm Control Units MEA

CONVENTIONAL FIRE ALARM CONTROL UNITS. MR-2300 SERIES Fire Alarm Control Units MEA CONVENTIONAL FIRE ALARM CONTROL UNITS MR-2300 SERIES Fire Alarm Control Units Description Secutron s MR-2300 Series fire alarm control panels consist of six and twelve zone models which are equipped with

More information

LifeAlarm Fire Alarm Control Panels

LifeAlarm Fire Alarm Control Panels LifeAlarm Fire Alarm Control Panels UL, ULC Approved* Features Control panel operator convenience features: Wide viewing angle 2 x 20 (40 character) alphanumeric LCD and dedicated LEDs provide convenient

More information

July 14, 1999 DF C-100.

July 14, 1999 DF C-100. www.firelite.com GENERAL The Fire Lite FIRE COMMAND 25/50 is a state-of-theart, compact, stand-alone or slave Emergency Voice Evacuation Control Panel (VECP). The FIRE COMMAND 25/50 is offered in a self-contained,

More information

MONROE PUBLIC LIBRARY WATERFLOW MONITORING SYSTEM

MONROE PUBLIC LIBRARY WATERFLOW MONITORING SYSTEM Waterflow Alarm Submittal Booklet For MONROE PUBLIC LIBRARY WATERFLOW MONITORING SYSTEM 380 South 5th St Monroe, OR 2G CONSTRUCTION PO Box 11735 Eugene, OR Convergint Technologies LLC 16575 SW 72nd Avenue

More information

good things in small packages

good things in small packages FireShield Control Panels good things in small packages life safety for small buildings and shops A perfect arrangement FireShield offers the very best conventional fire alarm technology available, with

More information

AL802ULADA. NAC Power Extender. Installation Guide. (See Application Guide for additional information)

AL802ULADA. NAC Power Extender. Installation Guide. (See Application Guide for additional information) AL802ULADA NAC Power Extender Installation Guide (See Application Guide for additional information) Rev. 042010 Agency Listings: UL Listed Control Units for Fire Protective Signaling Systems (UL 864).

More information

GENERAL STANDARD FEATURES. ISO-9001 Engineering and Manufacturing Quality System Certified to International Standard ISO-9001 PATENT PENDING

GENERAL STANDARD FEATURES. ISO-9001 Engineering and Manufacturing Quality System Certified to International Standard ISO-9001 PATENT PENDING GENERAL The VEC 25/50 is a state-of-the-art, compact, stand-alone or slave Emergency Voice Evacuation Control. The VEC 25/50 is offered in a self-contained, cost-effective design and includes a 25 Watt,

More information

ECC-50/100C. Emergency Command Center

ECC-50/100C. Emergency Command Center ECC-50/100C Emergency Command Center Canadian DF-60815:B Emergency Communications General Fire-lite s ECC-50/100C is a multipurpose emergency voice evacuation panel for fire applications, mass notification

More information

LifeAlarm Fire Alarm Controls

LifeAlarm Fire Alarm Controls UL, ULC Approved* LifeAlarm Fire Alarm Controls 4009 IDNet NAC Extender for Control with IDNet Communications or Conventional NACs Features Provides additional notification appliance circuit (NAC) capacity

More information

CONVENTIONAL FIRE ALARM CONTROL PANELS. SFC-200 Series Fire Alarm Control Panels MEA. Features. Description

CONVENTIONAL FIRE ALARM CONTROL PANELS. SFC-200 Series Fire Alarm Control Panels MEA. Features. Description CONVENTIONAL FIRE ALARM CONTROL PANELS SFC-200 Series Fire Alarm Control Panels Description Summit s SFC-200 Series fire alarm control panels consist of six and twelve zone models which are equipped with

More information

TrueAlert Addressable Notification Appliances

TrueAlert Addressable Notification Appliances UL, ULC Approved* TrueAlert Addressable Notification Appliances Audible Notification Appliances; Multi-Tone Horns with 520 Hz Output Features Individually addressed and controlled TrueAlert ES multi-tone

More information

Gamewell-FCI January 11, 2016 Honeywell Fire Systems 12 Clintonville Road Northford, Connecticut Product Guide Specification

Gamewell-FCI January 11, 2016 Honeywell Fire Systems 12 Clintonville Road Northford, Connecticut Product Guide Specification Gamewell-FCI January 11, 2016 Honeywell Fire Systems 12 Clintonville Road Northford, Connecticut 06472-1653 Phone (203) 484-7161 Fax (203) 484-7118 Website www.gamewell-fci.com Product Guide Specification

More information

XP6-C. Six Circuit Supervised Control Module and SYNC-1 Accessory Card

XP6-C. Six Circuit Supervised Control Module and SYNC-1 Accessory Card XP6-C Six Circuit Supervised Control Module and SYNC-1 Accessory Card General NOTIFIER s XP6-C six-circuit supervised control module provides intelligent alarm systems with supervised monitoring of wiring

More information

PEGAsys. Multi-Loop Intelligent Suppression Control System FEATURES DESCRIPTION. Effective: March 2007 K

PEGAsys. Multi-Loop Intelligent Suppression Control System FEATURES DESCRIPTION. Effective: March 2007 K PEGAsys Multi-Loop Intelligent Suppression Control System A UTC Fire & Security Company Effective: March 2007 K-76-028 FEATURES UL Listed CSFM Approved MEA Approved Peer-to-Peer Networking (to 32 nodes)

More information

NBG-12LR and NBG-12LRA

NBG-12LR and NBG-12LRA NBG-12LR and NBG-12LRA Dual-Action Agent Release Stations DN-6840:B F-710 Releasing Panels General The NBG-12LR and NBG-12LRA are Agent Release Stations designed for use with NOTIFIER Fire Alarm Control

More information

Addressable Detectors & Bases

Addressable Detectors & Bases Edwards Signaling Catalog u Intelligent Initiating Addressable Detectors & Bases Detectors: E-PD, E-PHD, E-HD Bases: B4U, RB4U, IB4U, SB4U Overview Edwards intelligent addressable detectors are meticulously

More information

Conventional Releasing Control Panel

Conventional Releasing Control Panel s Data Sheet Fire Safety Products Conventional Releasing Control Panel Pre-Action Deluge Agent-Releasing Fire System Model TXR-320 Remote configurable Up to two (2) hazard areas Operable with the following:

More information

MODUL-R FIRE ALARM CONTROL PANELS. MR-2900/MR-2920 Addressable Fire Alarm Control Panels MEA. Features. Description

MODUL-R FIRE ALARM CONTROL PANELS. MR-2900/MR-2920 Addressable Fire Alarm Control Panels MEA. Features. Description MODUL-R FIRE ALARM CONTROL PANELS MR-2900/MR-2920 Addressable Fire Alarm Control Panels Description MR-2900 Fire Alarm Control Panel The MR-2900 fire alarm system control unit is the heart of a sophisticated

More information

SpectrAlert Advance. Field-Selectable Mass Notification Devices. Description. An ISO Company SIGNALING. MEA Approved E

SpectrAlert Advance. Field-Selectable Mass Notification Devices. Description. An ISO Company SIGNALING. MEA Approved E SpectrAlert Advance Description System Sensor SpectrAlert Advance offers a variety of devices designed for mass notification, including plain devices for non-fire applications, amber lens strobes and speaker

More information

AL800ULADA. NAC Power Extender. Installation Guide

AL800ULADA. NAC Power Extender. Installation Guide AL800ULADA NAC Power Extender Installation Guide Rev. 122000 AL800ULADA - NAC Power Extender Overview: The Altronix AL800ULADA is an extremely cost effective 8 amp voltage regulated remote power supply/battery

More information

INTELLIGENT FIRE ALARM CONTROL UNITS. MMX NDS Intelligent Network Fire Alarm Control Unit. Features. Description

INTELLIGENT FIRE ALARM CONTROL UNITS. MMX NDS Intelligent Network Fire Alarm Control Unit. Features. Description INTELLIGENT FIRE ALARM CONTROL UNITS MMX-2003-12NDS Intelligent Network Fire Alarm Control Unit Description Secutron s MMX-2003-12NDS Network Fire Alarm Control Unit offers modular components to meet a

More information

INTELLIGENT FIRE ALARM CONTROL UNITS. MMX NDS Intelligent Network Fire Alarm Control Unit. Features. Description

INTELLIGENT FIRE ALARM CONTROL UNITS. MMX NDS Intelligent Network Fire Alarm Control Unit. Features. Description INTELLIGENT FIRE ALARM CONTROL UNITS MMX-2003-12NDS Intelligent Network Fire Alarm Control Unit Description Secutron's MMX-2003-12NDS is a powerful intelligent networkable fire alarm solution designed

More information

ACC-25/50ZST. Zoned System Voice with Telephone Evacuation Control Panel

ACC-25/50ZST. Zoned System Voice with Telephone Evacuation Control Panel ACC-25/50ZST Zoned System Voice with Telephone Evacuation Control Panel General The AUDIO COMMAND CENTER 25/50 Zone System with FireFighters Telephone (ACC-25/50ZST) is a state-of-the-art Emergency Voice

More information

Agent Release Control Panel

Agent Release Control Panel Agent Release Control Panel System Capacity Annunciators: 8 Electrical Specifications RP-2002 (FLPS-7 Power Supply): 120 VAC, 60 Hz, 3.66 amps RP-2002E (FLPS-7 Power Supply): 240 VAC, 50 Hz, 2.085 amps

More information

FireNET Plus Wiring Instructions

FireNET Plus Wiring Instructions FireNET Plus Wiring Instructions This manual provides wiring instructions for the 1 loop and 2 loop version of the FireNET Plus panels, which supports our finest Hochiki s DCP protocol. Note: Refer to

More information

Detection and Control Components

Detection and Control Components Detection and Control Components FSL-751 Very Intelligent Early Warning (VIEW ) LASER Smoke Detector with FlashScan (IQ-318/IQ-636X-2) Description The FSL-751 VIEW Laser Detector provides a revolutionary

More information

Specification/ Data Sheet

Specification/ Data Sheet Specification/ Data Sheet TRITON RP Agent Release Control Panel FEATURES Agent Release Control Panel designed specifically for suppression release operation with: Four initiating device circuits (IDCs)

More information

Installation Guide for AL800UL-ADA. NAC Power Extender. Rev

Installation Guide for AL800UL-ADA. NAC Power Extender. Rev Installation Guide for AL800UL-ADA NAC Power Extender Rev. 090500 Overview: The Altronix AL800UL-ADA is an extremely cost effective 8 amps voltage regulated remote power supply /battery charger. The AL800UL-ADA

More information

Concerns: Affects: Dated: June 12, SECTION 1: GENERAL Scope Work Included... 3

Concerns: Affects: Dated: June 12, SECTION 1: GENERAL Scope Work Included... 3 Technical Service Note Detection Systems, Inc. Fairport, New York 14450-9199 Technical Service (800) 374-7454 Sales: (800) 289-0096 and (585) 223-4060 Fax: (585) 223-9180 Concerns: Affects: Dated: June

More information

AND ARCHITECT SPECIFICATIONS

AND ARCHITECT SPECIFICATIONS PXL Conventional Zone Fire Alarm Control Panel ENGINEER AND ARCHITECT SPECIFICATIONS 12 Zone System Expandable to 32 10 Amp Base Power Supply Multiple Power Supplies Available - Local or Remote 4 Notification

More information

TrueAlert ES Addressable Notification Appliances

TrueAlert ES Addressable Notification Appliances UL, ULC, CSFM Listed; FM Approved* TrueAlert ES Addressable Notification Appliances Visible Notification Appliances, Wall Mount Multi-Candela Strobes, Model Series 49VO Features Individually addressed

More information

MS Rev. 2/DACT-UD: Intelligent Addressable FACP with Optional 2nd Loop

MS Rev. 2/DACT-UD: Intelligent Addressable FACP with Optional 2nd Loop MS-9600 Rev. 2/DACT-UD: Intelligent Addressable FACP with Optional 2nd Loop DF-52395:A A1-90 Addressable General The Fire Lite MS-9600 is a compact, cost-effective, intelligent addressable fire alarm control

More information

Data Sheet Fire Safety & Security Products. System Overview. Initiating Circuits SXL-EX FACP 7906

Data Sheet Fire Safety & Security Products. System Overview. Initiating Circuits SXL-EX FACP 7906 s Data Sheet Fire Safety & Security Products SXL-EX Fire Alarm Control Panel Conventional Zone Fire Alarm Control Panel ARCHITECT AND ENGINEER SPECIFICATIONS Four (4) zones expandable to eight (8) zones

More information

D7024 Fire Alarm Control Panel

D7024 Fire Alarm Control Panel D7024 Fire Alarm Control Panel The D7024 offers accurate, consistent performance with a feature set that elevates this panel to the top of its class. Fire systems you can rely on. D7024 24V Addressable

More information

PWGSC Ontario MULTIPLEX FIRE ALARM SYSTEM Sect Region Project Page 1 Number R

PWGSC Ontario MULTIPLEX FIRE ALARM SYSTEM Sect Region Project Page 1 Number R Region Project Page 1 PART 1 - GENERAL 1.1 REFERENCES.1 CAN/ULC-S524-2006, Standard for the Installation of Fire Alarm Systems..2 CAN/ULC-S525-2007, Audible Signal Device for Fire Alarm Systems..3 CAN/ULC-S526-2007,

More information

TrueAlert Addressable Notification Appliances

TrueAlert Addressable Notification Appliances Fire Control ** IS NORMAL ** :0:pm Mon 9-Feb-9 SY S TE M AC SUPERVISORY TROUB LE SILENCED SUPV TROUBLE SILENCE RESET CONTROL DISC ON NEC T POW ER + V ZONE P WR + 0V ZONE P WR - +IDNE T IDC + - IDNE T IDC

More information

PIER 4 PHASE 2 RECONFIGURATION PROJECT NO CONTRACT NO

PIER 4 PHASE 2 RECONFIGURATION PROJECT NO CONTRACT NO Question & Answer #1 PIER 4 PHASE 2 RECONFIGURATION PROJECT NO. 091251 CONTRACT NO. 070136 1. BIDDER QUESTION Are the following Electrical specs going to be added to for Port of Tacoma project? 15kV MV

More information

TrueAlarm ES Analog Sensing

TrueAlarm ES Analog Sensing TrueAlarm ES Analog Sensing UL, ULC, CSFM Listed; FM Approved* Features TrueAlarm addressable sensor base with 520 Hz sounder TrueAlarm sensor bases with 520 Hz tone require a TrueAlarm photoelectric,

More information

Intelligent Analog/Addressable Fire Alarm/Voice Integration Systems. IntelliKnight TM Series

Intelligent Analog/Addressable Fire Alarm/Voice Integration Systems. IntelliKnight TM Series Intelligent Analog/ Fire Alarm/Voice Integration Systems IntelliKnight TM Series CONVENTIONAL FIRE ALARM CONTROL PANELS SK-Conventional Series 2- to 30-Zone Fire Alarm Control Panels (FACPs) Whether your

More information

ECC-50/100(E) Emergency Command Center. General. Features. Emergency Voice Evacuation TYPICAL APPLICATIONS

ECC-50/100(E) Emergency Command Center. General. Features. Emergency Voice Evacuation TYPICAL APPLICATIONS ECC-50/100(E) Emergency Command Center DF-60734:A4 General Firelite s ECC-50/100 and ECC-50/100E are multipurpose emergency voice evacuation panels for fire applications, mass notification applications,

More information

TECHNICAL DATA OBSOLETE

TECHNICAL DATA OBSOLETE Deluge Devices 270a 1. PRODUCT NAME VIKING PAR-3 Available since 1991 2. MANUFACTURED FOR: THE VIKING CORPORATION 210 N. Industrial Park Road Hastings, Michigan 49058 U.S.A. Telephone: (269) 945-9501 (877)

More information

June 10, 2002 DF C S2424

June 10, 2002 DF C S2424 GENERAL www.firelite.com The Fire Lite FIRE COMMAND 25/50X is a state-of-theart Emergency Voice Evacuation Control Panel (VECP), with significant technological enhancements that set it apart from other

More information

TrueAlarm Analog Sensing

TrueAlarm Analog Sensing UL, ULC Approved* TrueAlarm Analog Sensing TrueAlarm Analog Sensors Photoelectric and Heat; Standard Bases and Accessories Features TrueAlarm analog sensing provides: Digital transmission of analog sensor

More information

AND ARCHITECT SPECIFICATIONS

AND ARCHITECT SPECIFICATIONS SXL Conventional Zone Fire Alarm Control Panel ENGINEER AND ARCHITECT SPECIFICATIONS 4 Zones Expandable to 8 Zones Microprocessor Based Control Factory Programmed Field Configurable 2 Style Y Notification

More information

AL1002ULADA. NAC Power Extender. Installation Guide. (See Application Guide for additional information) Rev X

AL1002ULADA. NAC Power Extender. Installation Guide. (See Application Guide for additional information) Rev X AL1002ULADA NAC Power Extender Installation Guide (See Application Guide for additional information) Rev. 071508X Agency Listings: UL Listed Control Units for Fire Protective Signaling Systems (UL 864).

More information

Intelligent 2 & 4 Loop Fire Alarm Control Panels

Intelligent 2 & 4 Loop Fire Alarm Control Panels Intelligent 2 & 4 Loop Fire Alarm Control Panels Advanced has combined the latest technology with many years of fire experience, to create the Axis AX Series Intelligent Fire Alarm Control Panels. The

More information

OSU PROJECT NO PAGE 1 02 NOV 2006 SECTION FIRE ALARM SYSTEM

OSU PROJECT NO PAGE 1 02 NOV 2006 SECTION FIRE ALARM SYSTEM OSU PROJECT NO. 30-04-15 PAGE 1 PART 1 GENERAL 1.1 WORK INCLUDED A. Provide all labor, materials, and equipment required to provide a complete and operating system of manual and automatic detection devices,

More information

MPC-6000 / MPC-7000 / RND-2

MPC-6000 / MPC-7000 / RND-2 MPC-6000 / MPC-7000 / RND-2 Fire Alarm System Control Unit Installation, Operation and Maintenance Manual Siemens Building Technologies, Inc. 8 Fernwood Road Florham Park, NJ 07932 Tel: (973) 593-2600

More information

4007ES Fire Control Panels

4007ES Fire Control Panels UL, ULC, CSFM Listed; FM Approved* Features Flexible standard combination of addressable initiation and addressable notification 4.3 (109 mm) Diagonal color touchscreen display: Convenient and intuitive

More information

GE Security Vigilant Fire & Life Safety. Easy. V-Series Intelligent Life Safety Systems

GE Security Vigilant Fire & Life Safety. Easy. V-Series Intelligent Life Safety Systems GE Security Vigilant Fire & Life Safety Easy. V-Series Intelligent Life Safety Systems Stylishly Simple Quick setup, easy maintenance, and striking good looks makes V-Series the life safety system of choice

More information

MS-4012/4024 and CMS-4012/4024. Instruction Manual for the. Fire Alarm Control Panels

MS-4012/4024 and CMS-4012/4024. Instruction Manual for the. Fire Alarm Control Panels R 12 Clintonville Road, Northford, CT 06472 Phone: (203) 484-7161 FAX: (203) 484-7118 Instruction Manual for the MS-4012/4024 and CMS-4012/4024 Fire Alarm Control Panels Document 15586 5/11/93 Revision:

More information

AL600ULADA. NAC Power Extender. Installation Guide

AL600ULADA. NAC Power Extender. Installation Guide AL600ULADA NAC Power Extender Installation Guide Rev. 122000 AL600ULADA - NAC Power Extender Overview: The Altronix AL600ULADA is an extremely cost effective 6.5 amp voltage regulated remote power supply/battery

More information

The CWSI System CALL WITH QUESTIONS. RELY ON OUR KNOWLEDGE. DEPEND ON OUR EXPERIENCE. (800)

The CWSI System CALL WITH QUESTIONS. RELY ON OUR KNOWLEDGE. DEPEND ON OUR EXPERIENCE. (800) The CWSI System The CWSI wireless fire alarm product line offers system versatility like none other. Frequency Hopping Spread Spectrum Technology (FHSS), coupled with Bi-directional RF Communication, Repeater

More information

30.45 Electric Release PDRP-2001

30.45 Electric Release PDRP-2001 The PDRP-2001 Fire Alarm Control Panel (FACP) is a six-zone control panel for single and dual hazard deluge and preaction applications. The FACP is compatible with conventional input devices (2-wire or

More information

AEGIS FEATURES DESCRIPTION. Conventional Fire Alarm-Suppression Control Unit. Effective: March Programmable Relays

AEGIS FEATURES DESCRIPTION. Conventional Fire Alarm-Suppression Control Unit. Effective: March Programmable Relays AEGIS Conventional Fire Alarm-Suppression Control Unit FEATURES Agency Approvals FM Approved FM Approved to ANSI/UL 864, 9th edition FM Approved to ULC-S527-99 Other domestic U.S. approvals/listings pending/

More information

Cerberus PRO A comprehensive fire-protection system

Cerberus PRO A comprehensive fire-protection system Cerberus PRO A comprehensive fire-protection system Cerberus TM ARCHITECT AND ENGINEER SPECIFICATIONS Standard 252-point and 504-point fire systems Remote viewing for the 252- point and 504-point systems

More information

MR-2602 Two Zone Fire Alarm Control Panel

MR-2602 Two Zone Fire Alarm Control Panel MR-2602 Two Zone Fire Alarm Control Panel Installation Manual Secutron LT-2015 Rev.3 July 2010 Table of Contents 1 Introduction 1.1 The MR-2602 Fire Alarm Control Unit... 11 1.1.1 General features...

More information

SELECT-A-HORN/STROBE SERIES

SELECT-A-HORN/STROBE SERIES SELECT-A-HORN/STROBE SERIES Features Description Mircom s Select-A-Strobe/Horn Series is designed to comply with the Americans with Disability Act (ADA) and meet UL standard 1971 requirements for emergency

More information

TrueAlert Multi-Candela Notification Appliances

TrueAlert Multi-Candela Notification Appliances TrueAlert Multi-Candela Notification Appliances UL, ULC, CSFM Listed; FM Approved* Features 24 VDC high intensity notification appliance common features: Xenon strobe with intensity selectable as 135,

More information

CATALOG NUMBER. Features. Description

CATALOG NUMBER. Features. Description NETWORK FIRE ALARM CONTROL UNIT Description with two optional RAX-1048TZDS modules Mircom s FleX-Net Series is a powerful intelligent networkable fire alarm solution designed with many levels of flexibility

More information

Intelligent Single Loop Fire Alarm Control Panel

Intelligent Single Loop Fire Alarm Control Panel Intelligent Single Loop Fire Alarm Control Panel The CAX-CTL-1L Intelligent Single Loop Fire Alarm Control Panel is a member of the industry leading Axis AX Series Intelligent Fre Alarm Control Panels

More information

AL1042ULADA. NAC Power Extender. Installation Guide. (See Application Guide for additional information) Rev X

AL1042ULADA. NAC Power Extender. Installation Guide. (See Application Guide for additional information) Rev X AL1042ULADA NAC Power Extender Installation Guide (See Application Guide for additional information) Rev. 071508X Agency Listings: UL Listed for Control Units for Fire Protective Signaling Systems (UL

More information

TrueAlarm Fire Alarm Systems

TrueAlarm Fire Alarm Systems OPERATOR OPERATOR OR TROUBLE CONDITION: TO : FIRE PRIORITY 2SYSTEM SYSTEM SIGNALS POWER INDICATOR. SUPERVISORYTROUBLE SILENCED ON D. TO SILENCE SIGNALS: - PRESS " SILENCE". SUPV TBL SYSTEM ACK ACK ACK

More information

Genesis Low Frequency (520 Hz) Horn-Strobe Installation Sheet

Genesis Low Frequency (520 Hz) Horn-Strobe Installation Sheet Genesis Low Frequency (520 Hz) Horn-Strobe Installation Sheet Table 1: Models Description Low frequency (520 Hz) horn, white housing, no FIRE marking, standard output clear strobe light Low frequency (520

More information

MEA. SpectrAlert Series Horns, Strobes, and Horn/Strobes GENERAL

MEA. SpectrAlert Series Horns, Strobes, and Horn/Strobes GENERAL March 30, 2000 Section: Audio/Visual Devices G-250 SpectrAlert Series Horns, Strobes, and Horn/Strobes GENERAL System Sensor SpectrAlert Series strobes, horns, and combination horn/strobes are UL listed

More information

IntelliKnight 5820XL Addressable Fire Alarm Control System Sales Guide

IntelliKnight 5820XL Addressable Fire Alarm Control System Sales Guide IntelliKnight 5820XL Addressable Fire Alarm Control System Sales Guide Product Overview The IntelliKnight 5820XL is an intelligent addressable fire alarm control panel designed for flexibility and reliability.

More information

Installation, Operating and Maintenance Manual

Installation, Operating and Maintenance Manual STATUS ZONES CONTROLS FIRE FAULT DISABLED FIRE 1 2 3 4 5 6 7 8 TEST FAULT DISABLED 1 5 BUZZER SILENCE RESET 1 2 TEST 2 6 LAMP TEST 3 SUPPLY 3 7 SYSTEM FAULT 4 8 SOUNDERS ACTIVATE/ SILENCE 4 FAULTS INSTRUCTIONS

More information

CHABOT-LAS POSITAS COMMUNITY COLLEGE DISTRICT CHABOT COLLEGE BIOLOGICAL SCIENCES B2100 BUILDING ANNEX BID NO

CHABOT-LAS POSITAS COMMUNITY COLLEGE DISTRICT CHABOT COLLEGE BIOLOGICAL SCIENCES B2100 BUILDING ANNEX BID NO CHABOT-LAS POSITAS COMMUNITY COLLEGE DISTRICT CHABOT COLLEGE BIOLOGICAL SCIENCES B2100 BUILDING ANNEX BID NO. 18-01 ADDENDUM NO. TWO DATE: December 20, 2017 CLIENT / PROJECT: Chabot-Las Positas CCD Biological

More information

System Accessories, LCD Annunciators

System Accessories, LCD Annunciators System Accessories, LCD Annunciators UL, ULC Approved* A4606 Series Color Touchscreen LCD Annunciators for 4007ES Fire Alarm Control Panels Features Fig 1: A4606-9202 LCD Annunciator with Red Trim Fig

More information

Cerberus TM PRO Fire Safety System A comprehensive fire-protection system

Cerberus TM PRO Fire Safety System A comprehensive fire-protection system s Data Sheet Fire Safety & Security Products Cerberus TM PRO Fire Safety System A comprehensive fire-protection system Standard 50-point, 252-point and 504-point-capacity systems Remote viewing for the

More information

AL1042ULADA. NAC Power Extender. Installation Guide (See Application Guide for additional information) Rev

AL1042ULADA. NAC Power Extender. Installation Guide (See Application Guide for additional information) Rev Altronix Corp. 140 58th St. Brooklyn, NY AL1042ULADA NAC Power Extender Installation Guide (See Application Guide for additional information) Rev. 052313 Agency Listings: UL Listed for Control Units for

More information

INTELLIGENT FIRE ALARM CONTROL PANEL

INTELLIGENT FIRE ALARM CONTROL PANEL INTELLIGENT FIRE ALARM CONTROL PANEL FX-2000 SERIES Description Mircom s FX-2000 Series Intelligent Analog Fire Alarm Control Panel is designed to provide maximum flexibility of analog system requirements

More information

PSN-1000 & PSN 1000(E) Installation Manual

PSN-1000 & PSN 1000(E) Installation Manual PSN-1000 & PSN 1000(E) Installation Manual Potter Electric Signal Company, LLC St. Louis, MO Customer Service: (866) 240-1870 Technical Support: (866) 956-1211 Fax: (314) 595-6999 www.pottersignal.com

More information

Control Relay Modules

Control Relay Modules TM INTERNATIONAL ANALOG ADDRESSABLE INPUT/OUTPUT DEVICES Control Relay Modules Model SIGA-CR, SIGA-MCR, SIGA-CRR, Features! Provides one no/nc contact (SIGA-CR/MCR) Form C dry relay contact can be used

More information

Release Control Fire Alarm Systems

Release Control Fire Alarm Systems SYSTEM ABORT PUSH AND HOLD COIL SUPERVISION MODULE (2 AMP) 2081-9046 RED INSTALLATION INSTRUCTIONS 574-437 REV YEL NAC+ MAINTAIN 1/4" SEPARATION BETWEEN POWER LIMITED (RED/) AND NONPOWER S LIMITED (YEL/)

More information

Desigo TM Fire Safety System A comprehensive fire-protection system

Desigo TM Fire Safety System A comprehensive fire-protection system s Desigo TM Fire Safety System A comprehensive fire-protection system Standard 50-point, 252-point and 504-point-capacity systems Remote viewing for the 252- point and 504-point systems One (1) or (2)

More information

ECC-50/100(E) Emergency Command Center

ECC-50/100(E) Emergency Command Center ECC-50/100(E) Emergency Command Center DF-60734:A9 C-200 General Fire Lite s ECC-50/100 and ECC-50/100E are multipurpose emergency voice evacuation panels for fire applications, mass notification applications,

More information

4007ES Fire Control Panels

4007ES Fire Control Panels UL, ULC, CSFM Listed; FM, NYC Fire Dept Approved* 4007ES Fire Control Panels 4007ES Hybrid, Fire Detection and Control Panel with Addressable and/or Conventional Initiation Features Satisfies a variety

More information

Supplement to The PDRP-1001/PDRP-1001A/PDRP-1001E Deluge Preaction Control Panel Manual

Supplement to The PDRP-1001/PDRP-1001A/PDRP-1001E Deluge Preaction Control Panel Manual Supplement to The PDRP-1001/PDRP-1001A/PDRP-1001E Deluge Preaction Control Panel Manual Replace the following pages of Document Number 50734 (I56-993-01/D770-19-00), Revision B with the corresponding revised

More information

TrueAlarm Smoke Detectors

TrueAlarm Smoke Detectors UL, ULC Approved* TrueAlarm Smoke Detectors TrueAlarm Photoelectric Smoke Detector with TrueSense Smoke/Heat Detection Features detection. If any of these alarm conditions are experienced, an alarm is

More information

s Notification Appliances

s Notification Appliances s Notification Appliances Data Sheet Fire Safety Products AS & AH Audible Horn Strobe / Audible Horn Appliances Application: Indoor / Outdoor AS-MC-CW AS-MC-R AH-R AH-W Product Overview Fast installation

More information