Centexbel. General certification regulations. Construction products
|
|
- Dana Manning
- 6 years ago
- Views:
Transcription
1 Centexbel Scientific and Technical centre of the Belgian Textile Industry General certification regulations Construction products 22/03/17 blz. 1 / 8
2 Contents 1 Introduction 3 2 Object 3 3 Definitions 3 4 General 5 5 Certification procedure Certification application The application and first verification Initial type examination Initial FPC audit Follow-up FPC-audit Certification decision Certification report 7 6 Obligations of the manufacturer 7 7 Sanctions in the event of infringement 7 8 Appeal procedure 7 9 Confidentiality 8 10 Impartiality 8 22/03/17 blz. 2 / 8
3 1 Introduction The European Construction Products Regulation (CPR) states that CE-marking is mandatory for a number of textile products used in construction. With this CE-marking, the manufacturer attests that the product is in conformity with the applicable technical harmonized specifications. The requirements with which these products have to comply are described in the corresponding harmonized standards. There are different systems for attestation: 1 : Product certification with type examination, initial and follow-up FPC audits 3 : Type examination 4 : Declaration by the manufacturer System 1 necessitates the intervention of a notified body that will issue a certificate of constancy of performance. Centexbel is a notified body with number Object This document specifies the procedures and rules applied by Centexbel, as a notified body, in processing a certification application for products according to the construction products regulation (CPR305/2011). The harmonized standards for which Centexbel is recognized are described on the NANDO website: edbody&refe_cd=epos_43815 In the framework of CE-marking in conformity with the standards for which CENTEXBEL is a notified body, CENTEXBEL is committed to perform the initial production control in the factory as well as to monitor the defined product families in respect of the certificates of constancy of performance describing the burning behaviour of the product families. 3 Definitions Applicant Juridical entity applying for the certificate of a product and that engages itself to maintain this conformity. This juridical entity is usually the manufacturer or his legal representative. CE-marking: CPR: a declaration that the product is in conformity with the essential requirements concerning safety environment and health and that it is therefore promoting the free trade within the European Union. Construction Products Regulation 305/ /03/17 blz. 3 / 8
4 Harmonized standard: European standard established under the mandate of the European Commission Notified body: Accredited independent institute for testing, auditing and certification. CENTEXBEL is a notified body. Initial FPC-audit: Initial control performed by the notified body within the company. It allows to identify and document the production process and serves as the basis of subsequent follow-up audits of the production process Follow-up FPC-audit: Control performed by the notified body within the company to guarantee the conformity with the technical requirements in respect of the initial FPC-audit. FPC-auditor: Collaborator of CENTEXBEL performing the FPC-audits. Product certifier: Collaborator of CENTEXBEL assessing the conformity of a product on the basis of a technical file. Product family(ies): is a group of products defined on the basis of the production method and construction characteristics. Declaration of of performance: declaration drafted by the manufacturer that states that the product or product group complies with the essential requirements and that it applies to the attestation of all systems. Certificate of constancy of performance: CWFT: declaration by the Notified Body stating that the product or product group complies with the essential requirements. Only applicable for system 1. Classified without further testing ; products that, within the imposed criteria, are classified automatically without testing. Systems of assessment and verification of constancy of performance: System 1: Product of product group treated with a flame retardant product and belonging to fire class A1 fl, A2 fl, B fl or C fl. System 2: not applicable System 3: Product of product group not belonging to attestation system 1 or 4. System 4: Product of product group with fire class E fl (within the CWFT-criteria) or F fl (no performance determined), needing no burning behaviour report. 22/03/17 blz. 4 / 8
5 4 General The aim of product certification is to verify the conformity of a product with the requirements of the Construction Products Regulation and to attest this conformity. 5 Certification procedure 5.1 Certification application If a company desires to certify a product it will contact CENTEXBEL. This preliminary phase mainly consists of providing general information on the procedure, including: the definition of the product families on the basis of the product method and product characteristics. the required documents that have to be put at the disposal of CENTEXBEL. The signing of a mutual agreement establishing the rights and obligations of both parties. 5.2 The application and first verification In this phase, the applicant submits an application for certification to CENTEXBEL and declares to accept the price offer. The product certifier of CENTEXBEL evaluates whether the information provided by the company is complete and asks, if necessary, complementary information to complement the file. The applicant provides the necessary documents with identification and description of the defined product families. 5.3 Initial type examination Tests have to be run on samples that are part of the defined product families and that can be indicated as extremes within the product family, sampling has to be performed by Centexbel. If the test results correspond with the technical requirements described in the standard, the product certifier decides to proceed to an initial FPC audit. 5.4 Initial FPC audit After consultation with the applicant, the initial FPC audit takes place. A FPC checklist is used as a manual, based on the directives established by the Group of Notified Bodies for the Construction Products Regulation 305/2011 Check list for inspection and surveillance of FPC. The FPC auditor drafts an initial report that he hands over to the application and the product certifier. If no immediate corrective action is required, the product certifier will submit a proposal of decision concerning the product families in question to the certification manager of Centexbel. 22/03/17 blz. 5 / 8
6 5.5 Follow-up FPC-audit Every year, following the initial audit, Centexbel will contact the certificate holder to perform a follow-up audit to monitor the production process of the qualities within these product families. The audit has to take place at least three months before the certificate expires. As a manual for this audit the FPC checklist is used, based on the directives established by the Group of Notified Bodies for the Construction Products Regulation 305/2011 Check list for inspection and surveillance of FPC. The FPC auditor drafts a follow-up audit report that he will hand over to the applicant and the product certifier. During the audit it is verified whether there are any reports that have expired, whether there have been additions to the product family or whether the products have been modified. In these cases, the auditor will demand samples to run tests. For these samples an application form to perform a re-control is filled in. The samples are registered to be performed in the fire lab of CENTEXBEL. If the re-control demonstrates that the envisaged fire classification is obtained for the product family, the product certifier will re-issue the certificate of constancy of performance and apply any possible modification in the description of the product family as indicated during the follow-up FPC audit. The certificates of constancy of performance valid for one year will be drafted. The certification manager takes the decision and signs the certificate of Centexbel. If the re-control demonstrates that the requested quality does not correspond with the required criteria of the certificate ofconstancy of performance, the applicant will be informed hereof by telephone and in writing and the applicant will be requested to take a number of measures. In the event of a modification in the product family, it will be verified whether the test results of a complete test are available on the extremities of a product family. In this case, the modification of a product family may be done without having to perform additional tests. During the yearly controls, one of the new products will be tested by preference. In the event a product family is extended the new extremities shall be tested completely before issuing a certificate of the extended product family. 5.6 Certification decision Depending on the results of the evaluation of the type tests and FPC audit, and possible controls, the certification manager will take one of the following decisions: In the event of a positive decision, the certificates are drafted based on the directives established by the Group of Notified Bodies for the Construction Products Regulation 305/2011 with the number 0493/CPR/XXXX. These certificates are valid for one year. The certification manager will sign the certificate. 22/03/17 blz. 6 / 8
7 In the event of a negative decision, the applicant will be informed hereof and the certificate will not be issued. 5.7 Certification report On the demand of the client, a certification report may be issued. This is a document containing the following items for a certain product family: Description of the product family Obtained classification Trade names within the product family Test reports on which the classification is based 6 Obligations of the manufacturer Every applicant is supposed to respect the general regulations and the stipulations in the agreement between CENTEXBEL and the manufacturer, concluded at the start of the certification procedure. In addition, the manufacturer is supposed to respect the European Construction Products Regulation 305/2011 and the applicable harmonized standards supporting the 305/2011 Regulation indicating a presumption of conformity with the requirements of the Regulation, and that are mentioned in annexe ZA of the corresponding standard. 7 Sanctions in the event of infringement If an infringement of default is observed, Centexbel reserves the right to take measures to sanction the manufacturer and to undo the infringement. The following measures are at the disposal and will be used according to the gravity of the infringement: Warning Suspension of the certificate Withdrawal of the certificate 8 Appeal procedure The manufacturer or any other interested party may appeal against a certification decision made by CENTEXBEL. This shall be done in writing and will be addressed to the director general. The director general of CENTEXBEL will verify the susceptibility of the appeal. In order to be susceptible, the appeal shall be motivated and refer to the decision taken by Centexbel. The susceptibility concerns by no means the legitimacy of the motivation. 22/03/17 blz. 7 / 8
8 If the appeal is declared non-susceptible, the director general informs the involved parties in writing of the reasons for this declaration of non-susceptibility. If the appeal is declared susceptible, the director general of Centexbel convenes an appeal committee. This committee is composed of 2 persons assigned by the director general who were not involved in the certification file against which an appeal has been made. The Appellant has the opportunity to clarify and defend his case during the meeting of the committee handling the appeal. The committee examines the case and decides to maintain or to change the decision with respect to the certification. This will be communicated in writing to all parties involved. There is no further appeal against the decision of the appeal committee. The treatment of an appeal against a decision with respect to certification has to take place within four weeks in any way. Whatever the decision of the appeal procedure, the manufacturer cannot claim any indemnity from CENTEXBEL for possible damages. 9 Confidentiality CENTEXBEL will treat all information with respect to the application as strictly confidential and will not disclose it to third parties without the express authorisation of the applicant. This does not apply to the information that, in conformity with the legislation, has to be communicated to the supervising authorities or to the other notified bodies. 10 Impartiality CENTEXBEL has taken all necessary measures to guarantee the impartiality of the decisions in respect of certification. This impartiality is supervised by a Certification Advisory Body assembling in regular intervals. Manufacturers, users, authorities as well as experts are represented by the members of this Certification Advisory Body. 22/03/17 blz. 8 / 8
Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU
GNB-CPR AG Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU NB-CPR/AG/03/002r3 Issued: 24 May 2013 APPROVED GUIDANCE GNB-CPR AG position paper Guidance to
More informationTechnical Bulletin CE marking: from 1st July 2013
Technical Bulletin CE marking: from 1st July 2013 New regulation New obligations Same CE mark We are facing the most significant change for a decade in the way that construction products are manufactured
More informationKiwa Regulations for Certification in accordance with the CPR
1 May 2014 Kiwa Regulations for Certification in accordance with the CPR EC Regulation No. 305/2011 (CPR) 1 May 2014 Kiwa Regulations for Certification in accordance with the CPR EC Regulation No. 305/2011
More informationGuidance Note No 21/1. CE Marking Windows and doorsets to BS EN 16034
Guidance Note No 21/1 CE Marking Windows and doorsets to BS EN 16034 Introduction CE Marking of construction products has been a legal requirement since July 2013. It is a European requirement for all
More informationDID YOU GET USED TO THE NEW CPR? HERE S A QUICK REVIEW!
June 2018 DID YOU GET USED TO THE NEW CPR? HERE S A QUICK REVIEW! How to recognize compliant cables? The new CPR defines the rules and the requirements of construction products to be manufactured, distributed
More information1. Terms defined in the Construction Products Regulation (CPR)
CEN/TC 351 Glossary of relevant terms related to the CPR The following list of terms provides definitions of terms related to the CPR (EU/305/2011) which are relevant for the work of CEN/TC 351 Construction
More informationDeclaration of Conformity Declaration of Performance Notes
What difference is there in the information to be included in the Declaration of Performance under the CPR (as updated by Delegated Act (EU) No. 574/2014) from that currently provided in the Declaration
More informationCE marking of fire-resistant doors the right way!
Page 1 of 5 ift Rosenheim CE marking of fire-resistant doors the right way! Surveillance and certification of fire safety products 1 Introduction The product standard for doors, gates and windows with
More informationSUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE)
SUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE) SCS/SF/053-8 Issue 1 Sira Certification Service INTRODUCTION One of the conditions placed on all holders of Sira
More informationConformity assessment procedures for the Alarm Components Scheme
Conformity assessment procedures for the Alarm RD_070, Issue 20 This guide describes the conformity assessment procedures for Alarm Components. This Alarm certifies that Alarm Components comply with technical
More informationFrequently Asked Questions on the Construction Products Regulation (CPR) - Enterprise and Industry
1. Must a construction product bear the CE marking after 30/06/2013? After 30/06/2013, in order to sell a construction product in the European Union (EU) the manufacturer has the obligation to issue a
More informationThe Danish Energy Authority to carry out inspections in June and July 2012
The Danish Energy Authority to carry out inspections in June and July 2012 We check the CE marking of the insulation products of expanded polystyrene (EPS) you sell or use. And we check if you have declared
More informationRegulation 574_2014: Annex III CPR. and. Regulation 568_2014: Annex V CPR
TF N 635 Regulation 574_2014: Annex III CPR and Regulation 568_2014: Annex V CPR 30-05-2014 28.5.2014 L 159/41 REGULATIONS COMMISSION DELEGATED REGULATION (EU) No 574/2014 of 21 February 2014 amending
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 687rev1 2015-06-02 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 I - Drafting
More informationYOUR GUIDE TO UNDERSTANDING CPR
YOUR GUIDE TO UNDERSTANDING CPR WITH EXCEL NETWORKING SOLUTIONS ISSUE 2 UPDATED JANUARY 2018 WWW.EXCEL-NETWORKING.COM CONTENTS What is CPR? When will this happen? Why the update? Which products are affected?
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 530 Rev.2 2012-04-13 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 Drafting
More informationGuidance Note No 19/1. CE Marking windows and doorsets
Guidance Note No 19/1 CE Marking windows and doorsets What is CE marking? The CE marking of products in the European Union is used by manufacturers to indicate that their products conform to requirements
More informationChief Operating Officer Giampiero Belcredi
CONTENTS 1. PURPOSE AND SCOPE 2. GENERAL PRINCIPLES AND GUARANTEES FOR THE CLIENT 3. ACCESS REQUIREMENTS FOR CERTIFICATION 4. ASSESSMENT PROCESS REQUIREMENTS 5. SUSPENSION AND REVOCATION OF THE CERTIFICATION
More informationThe New EU-Regulation on Construction Products
The New EU-Regulation on Construction Products Dr. Rainer Mikulits Managing Director Austrian Institute of Construction Engineering (OIB) IRCC Meeting 12-14 May 2010, Tokyo, Japan Contents European Construction
More informationThe Danish Energy Agency will carry out inspections in June 2013
Table of Contents The Danish Energy Agency will carry out inspections in June 2013... 2 What is CE marking of a construction product?... 3 Where can you find the requirements for CE marking of wood flooring?...
More informationEuropacable FAQ on CPR Status: 26/01/17
Europacable FAQ on CPR Status: 26/01/17 DISCLAIMER This FAQ document reflects the best knowledge of industry experts across Europe and the state of the art at the time of writing (July 2016). It represents
More informationImplementing the Construction Products Regulation (EU) 305/2011
Implementing the Construction Products Regulation (EU) 305/2011 G. Katsarakis European Commission, DG Enterprise and Industry Unit B-1: Sustainable Industrial Policy and Construction THE EU CONSTRUCTION
More informationETICS and the EU Internal Market The European framework. G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products
ETICS and the EU Internal Market The European framework G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products 1 THE EU CONSTRUCTION SECTOR The importance of the construction
More informationGuidelines for designating and monitoring notified bodies in Norway
Guidelines for designating and monitoring notified bodies in Norway Version 13.12.2010 The Ministry of Trade and Industry has also prepared a Norwegian version of these guidelines. Questions may be directed
More informationYour Key to achieving C.E Marking Compliance
Your Key to achieving C.E Marking Compliance As of the 1 st July 2013 The Construction Products Regulation 2011 contains clauses relating to C E marking of products. This will therefore mean that a CE
More informationBRL-K21030/02 5 August Certification of Alarm Communication. Certification Alarm Transmission Systems (ATS) Alarm Transmission Systems
5 August 2014 Certification of Alarm Communication Certification (ATS) Kiwa N.V. - 1-5 Augustus 2014 Preface This Evaluation Guideline (Certification Scheme) has been accepted by the Kiwa Board of Experts
More information(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland
Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland Electrical Safety Act (1135/2016) By decision of Parliament, the following is enacted:
More informationAnalysis Report
Prestige Carpets bvba Dhr. Dirk Santens Klein Frankrijk 38 9600 RONSE Your notice of Your reference Date 19-06-2013 24-07-2013 Required tests : Identification number T1309624 Information given by the client
More informationThe New EMC Directive 2004/108/EC
The New EMC Directive 2004/108/EC In the process of the review I have tried to spell out in words what is often referred to as a section number. This helps reduce the need to flip pages as one reads this.
More informationThe New EMC Directive 2004/108/EC
The New EMC Directive 2004/108/EC In the process of this review I have tried to spell out in words what is often referred to as a section number while also keeping to location information as used in the
More informationCE MARKING OF WOOD-BASED PANELS
28 Market Place Grantham Lincolnshire NG31 6LR Tel: 00 44 (0) 1476 563707 Fax: 0044 (0) 1476 579314 e-mail: wpif.panelboards@virgin.net WOOD PANEL INDUSTRIES FEDERATION CE MARKING OF WOOD-BASED PANELS
More informationConstruction Products Regulation (EU) No 305/2011
Construction Products Regulation (EU) No 305/2011 25 th March 2015 John Wickham BSc. Eng, Dip. Struct Eng, CEng, MIEI, MIStructE Chartered Engineer Advisor Building Standards Overview of Presentation Implementation
More informationThe European Radio Equipment Directive 2014/53/EU
TÜV SÜD Slide 1 The European Radio Equipment Directive 2014/53/EU 28 March 2017 Meet the speaker behind the voice Jon Lea Senior Engineer (Product Certification), TÜV SÜD 30 years experience in the testing
More informationRULEBOOK ON ELECTROMAGNETIC COMPATIBILITY
RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY ("Official Gazette of RS, issue No. 13/2010) I INTRODUCTION Scope Article 1 This Rulebook stipulates the essential requirements that shall be met with regard to
More informationBelcom Cable excellence engineered through quality. CPR Construction Products Regulation
CPR Construction Products Regulation Index Construction Products Regulation... 3 What is the Construction Products Regulation (CPR)... 4 What is the objective of the CPR... 4 Who does the application of
More informationCOMMISSION DELEGATED DECISION (EU) / of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2018) XXX draft COMMISSION DELEGATED DECISION (EU) / of XXX supplementing Regulation (EU) No 305/2011 of the European Parliament and of the Council with regard to
More informationCO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
More informationEUROPUMP ATEX Guideline Part II
EUROPEAN ASSOCIATION OF PUMP MANUFACTURERS ASSOCIATION EUROPÉENNE DES CONSTRUCTEURS DE POMPES EUROPÄISCHE VEREINIGUNG DER PUMPENHERSTELLER EUROPUMP ATEX Guideline Part II Application of the EC-Guidelines
More informationEUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY
EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY Brussels, 23 October 2018 REV1 Replaces the Q&A document published on 13 September 2017 QUESTIONS AND ANSWERS RELATED TO THE UNITED KINGDOM'S
More informationThe New Generationn of Firedoors
The New Generationn of Firedoors Product Standard EN 16034 Introduction A modern company, while operating in mature sectors, is actually part of an ncreasingly technocratic world, influenced by technical,
More informationBUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately
More informationREACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013
SAFETY, STRUCTURES AND FIRE DEPARTMENT Reaction to Fire REACTION TO FIRE CLASSIFICATION REPORT ACCORDING TO THE EUROPEAN STANDARD NF EN 50-+A:20 Notification by the French Government to the European Commission
More informationTechnical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme: Solar products and components Accreditation Kiwa Italia S.p.A. Via Treviso 32/34 31020 San Vendemiano (TV) Italia Tel: +39
More informationGuidance Note on the Construction Products Regulation
Guidance Note on the Construction Products Regulation Version 3 - October 2014 APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS FOR CONSTRUCTION Revisions to version 2 of Guidance Note on
More informationREGULATION FOR THE CE CERTIFICATION ACCORDING TO THE MEDICAL DEVICES DIRECTIVE
TABLE OF CONTENTS 1. PURPOSE AND FIELD OF APPLICATION 2. GENERAL PRINCIPLES AND GUARANTEES FOR THE CUSTOMER 3. ACCESS REQUIREMENTS FOR CERTIFICATION 4. REQUIREMENTS OF THE ASSESSMENT PROCESS 5. SUSPENSION,
More informationRegulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (EU CPR)
November 2013 Last updated: June 2015 Regulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (EU CPR) Frequently Asked Questions Part IV Preliminary remarks
More informationDRAFT COMMISSION DELEGATED REGULATION (EU) / of XXX
DRAFT COMMISSION DELEGATED REGULATION (EU) / of XXX on making available on the market of unmanned aircraft intended for use in the open category and on third-country UAS operators THE EUROPEAN COMMISSION,
More informationAUGUST 2016 CONTENTS:
EMC SERVICES NEWSLETTER AUGUST 2016 CONTENTS: RECENT STANDARD CHANGES NEW FCC REGULATIONS IEC 60601-1-2 4TH EDITION LOW VOLTAGE DIRECTIVE EU DIRECTIVES EMC DIRECTIVE 2014/30/EU KOREA UPDATE: KN32/35 1.
More informationWhite paper. Construction Product Regulations* by Multimedia Connect. Which cables are concerned by these new regulations?
White paper by Multimedia Connect Construction Product Regulations* We are all concerned by the safety of persons and property. In 2010, 8 million fires were recorded: they are estimated to have caused
More informationCE Marking for Fire Resistant doors. The future EN Agustín Garzón Cabrerizo Technical Director Fire Resistance Lab.
CE arking for Fire Resistant doors. The future EN 16034 Agustín Garzón Cabrerizo Technical Director Fire Resistance Lab. AFITI-LICOF 1 Overview Pedestrian doorsets, industrial, commercial, garage doors
More informationTFI Report Classification
TFI Report Classification of the Reaction to Fire according to EN 13501-1:2010 Customer Stuttgarter Straße 75 74321 Bietigheim-Bissingen GERMANY Product resilient floor covering Product 1: Scala 55 Connect
More informationCE marking of noise barriers and foundations
CE marking of noise barriers and foundations Date 2 June 2014 Case officer Charlotte Sejr E - mail cslp@vd.dk Phone +45 7244 2340 Document 14/10726-2 Page 1/13 1 Table of Contents CE MARKING OF NOISE BARRIERS...
More informationDIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
29.3.2014 Official Journal of the European Union L 96/309 DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating
More informationGNB-CPR Position Paper: Issuance of certificates under CPR
GNB-CPR AG Co-ordination of the Group of Notified Bodies for the Construction products Regulation (EU) No 305/2011 NB-CPR/14-612r7 Issued: 18 August 2016 APPROVED GUIDANCE GNB-CPR Position Paper: Issuance
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design
More informationTable of Contents for the REGULATION (EU) 2017/745 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5 April 2017
Chapter I o Scope and definitions Article 1 Subject matter and scope 13 Article 2 Definitions 15 Article 3 Amendment of certain definitions 20 Article 4 Regulatory status of products 20 Chapter II o Making
More informationNew Legal Framework Carlo Casati
New Legal Framework Carlo Casati Milan, 1 April 2016 Summary New Legislative Framework Market Surveillance Conformity Assessment CE Marking 2 06.11.2013 NOTIFIED BODY TRAINING 01 New Legislative Framework
More informationEUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY
Ref. Ares(2017)2066048-21/04/2017 EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY Health and food audits and analysis DG(SANTE) 2016-8748 - MR FINAL REPORT OF AN AUDIT CARRIED OUT IN
More informationCERTIFICATION MANUAL FOR NF PROGRAMMES MANAGED BY EUROVENT CERTITA CERTIFICATION: GENERAL PROVISIONS
Certification body mandated by AFNOR Certification 48/50 rue de la Victoire 75009 PARIS Telephone: +33 (0) 1 75 44 71 71 www.eurovent-certification.com/www.certita.fr CERTIFICATION MANUAL FOR NF PROGRAMMES
More informationBUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY The business environment relevant for the work of the CEN/TC includes - The entire industry involved
More informationEUROPEAN UNION. Brussels, 13 February 2014 (OR. en) 2011/0357 (COD) PE-CONS 54/13 ENT 190 MI 550 CONSOM 128 COMPET 470 CODEC 1481
EUROPEAN UNION THE EUROPEAN PARLIAMT THE COUNCIL Brussels, 13 February 2014 (OR. en) 2011/0357 (COD) PE-CONS 54/13 T 190 MI 550 CONSOM 128 COMPET 470 CODEC 1481 LEGISLATIVE ACTS AND OTHER INSTRUMTS Subject:
More informationCouncil Directive 93/68/EEC of 22 July 1993 amending Directives
Council Directive 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility),
More informationFAQs Radio Equipment Directive (RE-D)
FAQs Radio Equipment Directive (RE-D) What is the objective of the RE-D? The Radio Equipment Directive (2014/53/EU) was adopted in 2014 and Member States had to transpose it into their national law before
More informationREACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013
SAFETY, STRUCTURES AND FIRE DEPARTMENT Reaction to Fire REACTION TO FIRE CLASSIFICATION REPORT ACCORDING TO THE EUROPEAN STANDARD NF EN 13501-1+A1:2013 Notification by the French Government to the European
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 1.7.2015 C(2015) 4394 final COMMISSION DELEGATED REGULATION (EU) /... of 1.7.2015 on the classification of the reaction to fire performance of construction products pursuant
More informationREDCA update on the RED. Days to go. 17 May 2017
REDCA update on the RED Days to go 17 May 2017 Replaces Radio & Telecommunication Terminal Equipment Directive (RTTED) 1999/5/EC, repealed with effect from 13 June 2016 RED applied from 13 June 2016 (+
More informationGuideline Construction Products Regulation (EU) 305/20122
Guideline Construction Products Regulation (EU) 305/20122 Guideline: CPR 1 Table of contents Common Abbreviations... 4 Executive Summary... 5 Purpose of this guidance document... 5 Summary Requirements
More informationREACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013
SAFETY, STRUCTURES AND FIRE DEPARTMENT Reaction to Fire REACTION TO FIRE CLASSIFICATION REPORT ACCORDING TO THE EUROPEAN STANDARD NF EN 13501-1+A1:2013 Notification by the French Government to the European
More informationCOMMISSION DELEGATED REGULATION (EU) /... of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX amending Delegated Regulations (EU) No 1059/2010, (EU) No 1060/2010, (EU) No 1061/2010, (EU) No 1062/2010,
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 29.6.2017 C(2017) 4408 final COMMISSION DELEGATED REGULATION (EU) /... of 29.6.2017 amending Commission Delegated Regulation (EU) No 151/2013 of 19 December 2012 supplementing
More informationEN CE instead of approval Opportunities for manufacturers and trading to enter new markets in Europe
EI 2 30-C5-S 200 do you know what it means? EN 16034 CE instead of approval Opportunities for manufacturers and trading to enter new markets in Europe Dipl.-Ing. Jürgen Benitz-Wildenburg, Director PR &
More informationConstruction Products Regulation (CPR)
www.excel-networking.com S2 Construction Products Regulation (CPR) Section 2 In this Section: Pages What is CPR? 21 When will this happen? 21 Why the update? 21 Which products are affected? 21 Who is affected?
More informationCERTIFICATION RULES OF THE MARK
Certification body mandated by AFNOR Certification 48/50 rue de la Victoire 75009 PARIS Telephone : +33 (0)1 75 44 71 71 www.eurovent-certification.com /www.certita.fr CERTIFICATION RULES OF THE MARK RADIATORS,
More informationCo-ordination of the Group of Notified Bodies for the Construction Products /Regulation 305/2011/EU
GNB-CPR AG Co-ordination of the Group of Notified Bodies for the Construction Products /Regulation 305/2011/EU NB-CPR/AG/03/003r8a Issued: 18 December 2013 APPROVED GUIDANCE GNB-CPR position paper Generic
More informationDEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID. NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008)
STAATSKOERANT, 19 NOVEMBER 2010 No.33763 11 No. R. 1072 DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID 19 November 2010 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5
More informationDIRECTIVES. DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 30 November 2009 relating to appliances burning gaseous fuels
L 330/10 Official Journal of the European Union 16.12.2009 DIRECTIVES DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 30 November 2009 relating to appliances burning gaseous fuels
More informationLiving with the Construction Products Directive - The Role of the Notified Bodies
Living with the Construction Products Directive - The Role of the Notified Bodies Francky Callewaert DG Enterprise The core of the CE marking Is obligatory for every construction product placed on the
More informationCOMMISSION DELEGATED REGULATION (EU)
28.5.2014 L 159/41 REGULATIONS COMMISSION DELEGATED REGULATION (EU) No 574/2014 of 21 February 2014 amending Annex III to Regulation (EU) No 305/2011 of the European Parliament and of the Council on the
More informationErik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories
Hazardous Locations: Understanding the Basics of Global Compliance Requirements Erik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories DISCLAIMER/ TERMS OF USE: THE INFORMATION
More information(recast) (Text with EEA relevance) out the conformity assessment procedure. Conformity 20 February 2014.
29.3.2014 Official Journal of the European Union L 96/357 DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating
More informationGeorgios Katsarakis European Commission
Georgios Katsarakis European Commission Single Market Strategy of the European Commission G. Katsarakis (DG GROW/C.1) The Single Market strategy of the European Commission In January 1985, the President
More informationValve Manufacturers Association of America
BUSINESS ASSURANCE Valve Manufacturers Association of America 2016 Technical Seminar: EU s New Legislation Framework (NLF) - What this means to you. Mike Norman 1 VMA Technical Session - March 2016 SAFER,
More informationCERTIFICATE. Conformity of the Factory Production Control CPR TÜVRh
CERTIFICATE Conformity of the Factory Production Control 0035-CPR-1090-1.00794.TÜVRh.2017.003 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the
More informationRecord of Amendments. Version Date Amendment Section/page affected
Industry support for effective compliance BTHA Guidance - The Low Voltage Directive (LVD) Directive 2014/35/EU On the harmonisation of the laws of the Member States relating to the making available on
More informationBUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
More information+ = FIRE LABORATORY INTRODUCTION. APPLUS+ LGAI - Our company history. High Technology Knowledge. Customer Confidence. Branding
INTRODUCTION APPLUS+ LGAI - Our company history As a brief resume of our history LGAI - Laboratori General d'assaigs i Investigacions (whose commercial name was LGAI Technological Center) was fully owned
More informationCEN standardization work on refrigerating systems, especially standard EN 378
CEN standardization work on refrigerating systems, especially standard EN 378 Carsten Hoch Head of Refrigeration TÜV SÜD Industrie Service GmbH Ridlerstrasse 65, 80339 Munich carsten.hoch@tuev-sued.de
More informationNew Requirements for Placing of Medical Devices on the Market: Conformity Assessment to the Technical Regulations
New Requirements for Placing of Medical Devices on the Market: Conformity Assessment to the Technical Regulations September 2015 This summer the medical device circulation reform became one of the most
More informationProcedure for the Approval of New Fire Detection and Alarm Technologies
VdS Guidelines for Automatic Fire Detection and Fire Alarm Systems VdS 3469en Procedure for the Approval of New Fire Detection and Alarm Technologies VdS 3469en : 2016-01 (01) Publisher and publishing
More informationEuropean Technical Assessment
European Technical Assessment ETA 17/0457 Version 01 Date of issue: 2017-08-09 UBAtc Assessment Operator: Belgian Construction Certification Association Rue d Arlon 53-1040 Brussels www.bcca.be - info@bcca.be
More informationAchieve Success with European Medical Device Commercialization. By Russ King
Achieve Success with European Medical Device Commercialization By Russ King Achieve Success with European Medical Device Commercialization Given the complexity of the FDA s regulatory pathway, many medical
More informationSingle Market : regulatory environment, standardisation and New Approach Pressure equipment, medical devices, metrology M/327
EUROPEAN COMMISSION ENTERPRISE DIRECTORATE-GENERAL Single Market : regulatory environment, standardisation and New Approach Pressure equipment, medical devices, metrology Committee on Standards and Technical
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 8.3.2018 C(2018) 1392 final COMMISSION DELEGATED REGULATION (EU) /... of 8.3.2018 establishing common safety methods on safety management system requirements pursuant to Directive
More informationExcel User Guide for Data Gathering. Electrolux Chemical Management Web Application
Excel User Guide for Data Gathering Electrolux Chemical Management Web Application ECO@WEB Table of contents: Table of contents:... 2 1 Using the Data Gathering Application... 3 1.1 Material Categorisation
More informationCertification Rules of the Mark AEAS LUMINAIRES FOR EMERGENCY LIGHTING
Certification Rules of the Mark Identification No : NF 015 Revision No : B July 2015 Application date : 2015-07-15 AEAS LUMINAIRES FOR EMERGENCY LIGHTING Certification Body mandated by AFNOR Certification:
More informationSD119 Range of Conventional Smoke and Smoke/Heat Detectors (refer to attached appendix for details and conditions)
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation), this certificate applies to the construction product(s).
More informationCOMMISSION DELEGATED REGULATION (EU) /... of XXX
Ref. Ares(2017)4156968-24/08/2017 EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX establishing common safety methods on safety management system requirements
More informationCONSTRUCTION PRODUCTS REGULATION MOLEX CES COPPER AND FIBRE CABLE
CONSTRUCTION PRODUCTS REGULATION MOLEX CES COPPER AND FIBRE CABLE Carol Harris, EMEA Product Manager WHITE PAPER Molex Connected Enterprise Solutions EXECUTIVE SUMMARY Combustible construction materials
More informationThe new Gas Appliances Regulation (EU) 2016/426
The new Gas Appliances Regulation (EU) 2016/426 Background and overview A Whitepaper What is happening? As of 21 April 2018, the Gas Appliances Directive 2009/142/EC (GAD) will be replaced by the new Gas
More informationMandate M/118 WASTE WATER ENGINEERING PRODUCTS
Mandate M/118 Page 1 sur 13 Mandate M/118 TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CReatE RELATED TO THE FOLLOWING END USES 18/33 : DRAINAGE (INC. HIGHWAS)
More information