The SharpEye 40/40R (IR) Flame Detection

Transcription

1 The SharpEye 40/40R (IR) Flame Detection requires fire/flame detection as a life-saving necessity The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation Dräger offers a wide variety of high-quality flame-detectors that fulfil these requirements

2 02 The SharpEye 40/40R (IR) Benefits The Cost-Effective Multi-Talent The SharpEye 40/40R models offered by Dräger use advanced flame analysis tools to quickly detect hydrocarbon-based fuel and gas fires With its capability of providing an early warning of flaming fires at 45 μm and immunity to false alarms caused by other IR sources such as sunlight IR projectors the 40/40R is the right choice for those who want more performance for less Tough And Intelligent The 40/40R is one of the most weather resistant single IR flame detector currently available on the market It comes with new features such as a heated window to eliminate icing and condensation, HART capabilities for digital, lower power requirements and a compact, lighter design Reliability Functional safety is a concept applicable across all industry sectors It is fundamental to enabling complex technology used for safety-related systems It provides assurance that the safety-related systems will offer necessary risk reduction The SharpEye 40/40 flame detector series is highly reliable and complies with the IEC Safety Integrity Requirements of SIL2 Automatic and manual optics checks (BIT) Automatic checks of the detector electronics and optics helps ensure that no fault goes undetected Additionally the test can be triggered manually at any time Easily visible status LED A tri-colored LED which is visible at the front of the detector provides a simple status indication to personnel in close proximity to the detector Green indicates normal operation; yellow indicates a fault and red indicates the presence of radiation from a fire Simple installation and commissioning Installation is simple! The detector is easily installed with a stainless steel tilt mount which enables the detector to be rotated up to 60 in all directions to position of the detector in relation to the potential fire source SharpEye 40/40R offers: Sensitivity selection to ensure no zone crossover detection Automatic and Manual Built-In-Test (BIT) to ensure continued reliable operation Heated window for operation in harsh weather conditions (snow, ice, condensation) Multiple output options for maximum flexibility and compatibility

3 The SharpEye 40/40R (IR) 03 Benefits 3 Relays for Alarm, Fault and Auxiliary 0 20 ma (stepped) HART Protocol for maintenance and asset management RS-485, Modbus compatible Approved to Safety Integrity Level 2 (SIL2 TÜV) Ex approvals for worldwide application: ATEX, IECEx, FM/FMC, CSA 3rd party performance tested: EN54-10 (VdS), FM3260 Accessories Flame Simulator 40/40 IR The SharpEye Flame Simulator 40/40 IR is designed specifically for use with SharpEye flame detectors The Fire Simulator emits IR radiation in a unique sequential pattern corresponding to and recognizable by the detector as fire This allows the detectors to be tested under simulated fire conditions without the associated risks of an open flame D D Weather cover Flame Detector The weather cover protects the detector from different weather conditions, such as snow and rain

4 04 The SharpEye 40/40R (IR) Accessories SharpEye Laser Pointer Does the detector cover the area that needs protection? Is it located correctly and does the detector s cone of vision cover the most dangerous spot? This accessory enables the designer/installer to optimize detector location and its actual detection area coverage D D SharpEye 40/40 Air Shield The special Air Shield, developed for SharpEye optical flame detectors, allows their installation under tough environmental conditions where they may be exposed to oil vapors, sand, dust and other particulate matter Related Products The SharpEye 40/40L-LB (UV/IR) requires fire/flame detection as a life-saving necessity The best solutions must combine state-of the-art technology with rugged durability and be ready to reliably work in any situation Dräger requirements D

5 The SharpEye 40/40R (IR) 05 Related Products The SharpEye 40/40UFL (UV/IR) requires fire/flame detection as a life-saving necessity The best durability and be ready to reliably work in any situation Dräger requirements D D The SharpEye 40/40L4-L4B (UV/IR) requires fire/flame detection as a life-saving necessity The best durability and be ready to reliably work in any situation Dräger requirements The SharpEye 40/40U-UB (UV) requires fire/flame detection as a life-saving necessity The best durability and be ready to reliably work in any situation Dräger requirements D D The SharpEye 40/40M (Multi IR) requires fire/flame detection as a life-saving necessity The best durability and be ready to reliably work in any situation Dräger requirements

6 06 The SharpEye 40/40R (IR) Related Products The SharpEye 40/40I (IR3) requires fire/flame detection as a life-saving necessity The best durability and be ready to reliably work in any situation Dräger requirements and more D

7 The SharpEye 40/40R (IR) 07 Technical Data Type Spectral Response Explosion proof IR flame detector for hydrocarbon- and hydrogen-based fires IR = 4,4 4,6 μm Measuring Performance Field of view Horizontal 100 ; Vertical 95 Detection Range (at highest Sensitivity Setting for 1 ft 2 (01 m 2 ) pan fire) Response Time Typically 5 seconds Sensitivity Ranges 2 Sensitive ranges for 1 ft2 (01 m2) n-heptane pan fire from 15 ft (5 m) to 50 ft (15 m) Fuel * 30" (075 m) high, 10" (025 m) width plume fire Electrical Data Output Signals Fault Signal ft / m n-heptane / Gasoline 50 / 15 Diesel Fuel / JP5 / Kerosene 37 / 11 Ethanol 95 % 25 / 75 Methanol 25 / 75 IPA (Isopropyl Alcohol) 25 / 75 Methane* 295 / 9 LPG* 43 / 13 Polypropylene Pellets 37 / 11 Office Paper 20 / ma (stepped), HART ma BIT Fault Signal 2 ma ±10 % Normal Signal 4 ma ±10 % Warning Signal 16 ma ±5 % Alarm Signal 20 ma ±5 % Relays RS485 Power supply Power Consumption Alarm, Fault and Auxiliary SPST volt-free contacts rated 2 A at 30 VDC Modbus compatible communication link 24 VDC nominal (18 32 VDC) Standby: Max 90 ma (110 ma with heated window) Alarm: Max 130 ma (160 ma with heated window) Ambient Conditions Temperature Humidity -55 to +75 C / -67 to +167 F (operating) -55 to +85 C / -67 to +185 F (option and storage) Up to 95 % non-condensing (withstands up to 100 % RH for short periods) Enclosure Material Stainless steel SS 316 Material Option Connecting Thread Weight Dimensions Detector Ingress Protection Heavy duty copper free aluminum, red epoxy enamel finish 2 3/4" 14NPT or 2 M25 15 mm Detector SS 316L 28 kg / aluminum 13 kg Tilt mount 10 kg mm IP66 and IP67, NEMA 250 6P Approvals ATEX and IECEx Ex II 2 G D Ex d e IIC T5 Gb Ex d e IIC T4 Gb Ex tb IIIC T96 C Db Ex tb IIIC T106 C Db (-55 C Ta +75 C) (-55 C Ta +85 C)

8 08 The SharpEye 40/40R (IR) Technical Data FM/FMC/CSA Safety Integrity Level Performance CE mark Ordering Information Order Information SharpEye 40/40R (IR) Class I Div 1, Groups B, C & D Class II/III Div 1, Groups E, F & G SIL2 certified by TÜV (EN61508) EN54-10 (VdS) FM3260 Flame Detector 40/40R-112SF IR Flame Detector 40/40R-212SF IR Flame Detector 40/40R-111SC IR Flame Detector 40/40R-211SC IR Flame Detector 40/40R-111AC IR Flame Detector 40/40R-121AC IR Flame Detector 40/40R-211AC IR Other versions are available on request Accessories for SharpEye 40/40R (IR) Weather cover Flame Detector (SS) Weather cover Flame Detector (ABS) Tilt mount Flame Detector (SS) Flame Simulator 40/40 IR Mini-Laptop Diagnostic Kit USB / RS485 converter kit, incl SW SharpEye Laser Pointer SharpEye 40/40 Air Shield SharpEye 40/40 Duct Mount Pole Mount (U-Bolt) 2" (SS) Pole Mount (U-Bolt) 3" (SS) SharpEye is a registered trademark of Spectrex Inc EMI/RFI protected to EN and EN Communications & Sales Marketing PP LE Printed in Germany Chlorine-free environmentally compatible Subject to modifications 2015 Drägerwerk AG & Co KGaA CORPORATE HEADQUARTERS Drägerwerk AG & Co KGaA Moislinger Allee Lübeck, Germany wwwdraegercom Manufacturer: Spectrex Inc 218 Little Falls Road Cedar Grove, NJ USA Locate your Regional Sales Representative at: wwwdraegercom/contact SYSTEM CENTERS P R CHINA Draeger Safety Equipment (China) Co, Ltd A22 Yu An Rd, B Area, Tianzhu Airport Industrial Zone, Shunyi District, Beijing Tel Fax GERMANY Dräger Safety AG & Co KGaA Revalstrasse Lübeck Tel Fax UNITED KINGDOM Draeger Safety UK Ltd Blyth Riverside Business Park Blyth, Northumberland NE24 4RG Tel Fax REGION EUROPE SOUTH Dräger Safety France SAS 25, rue Georges Besse Antony Cedex, France Tel Fax EuropeSouth@draegercom USA Draeger Safety, Inc 505 Julie Rivers, Suite 150 Sugar Land, TX Tel Fax infogds@draegercom REGION ASIA PACIFIC Draeger Safety Asia Pte Ltd 25 International Business Park #04-20/21 German Centre Singapore Tel Fax asiapacific@draegercom REGION CENTRAL AND SOUTH AMERICA Dräger Panama Comercial S de RL Complejo Business Park, V tower, 10th floor Panama City Tel Fax contactcsa@draegercom REGION MIDDLE EAST, AFRICA Dräger Safety AG & Co KGaA Branch Office PO Box Dubai, United Arab Emirates Tel Fax contactuae@draegercom