IP/Network Doorbell. Quick Installation Guide V3.1

Size: px

Start display at page:

Download "IP/Network Doorbell. Quick Installation Guide V3.1"

Sheila Osborne
6 years ago
Views:

1 IP/Network Doorbell Quick Installation Guide V3.1

2 1. Interfaces Instruction 1. Front Panel 2. Back Panel

3 2. Doorbell Installation

Open APP and click register. 2. Choose register mode and finish it as tips.

4 3. Mobile Phone APP 1. Install APP a. Scan the below QR Code. b. Search Yoosee on APP Store. c. Visit to download. 2. Register and login APP. 1.Open APP and click register. 2. Choose register mode and finish it as tips. (Mobile phone registration is recommended) 3. Make sure you choose your country right to receive code.

4. Network Configuration 1. Power on the doorbell and wait for starting.

Smartlink mode to make Wi-Fi connection - within 5 minutes with doorbell power on.

Click on + on the top right and choose Smartlink. 2. Operate as tips. Click NEXT when finished. 3.

5 4. Network Configuration 1. Power on the doorbell and wait for starting. (It will have the sound tip if the doorbell starts). 2. Smartlink mode to make Wi-Fi connection - within 5 minutes with doorbell power on. Tip: Ensure the Wi-Fi that you set can connect to the mobile phone or tablet normally. 1.Open the software. Click on + on the top right and choose Smartlink. 2. Operate as tips. Click NEXT when finished. 3. Input Wifi password and click NEXT. 4.Wait for the WiFi connection. 5. Setup password after wifi settings and click Save button on top right. 6. APP will automatically jump to the equipment list. Click device window, you can preview the video.

6 Remark: For security purpose, there is no default password, which need the user set the device password for the first time. (Password must be 6-30 characters, including alphabetic and number.) 3. Add doorbell remotely, choose Manual Add. 1. Open the software. Click on + on the top right and choose Manual Add. 2. Input device ID, name and password and click Ok button. 4. Connect doorbell in same LAN with RJ45. 1.Open the software. Click on Discover 1 new device 2.Click + 3. Input device name and password and click Save button on top right

5. Visitor Calling 1.Visitor press the Call button.

After answering, you can call intercom, take photos,

Full duplex intercom call, which is more convenient

7 5. Visitor Calling 1.Visitor press the Call button. 2. Popup message from APP, answer or hang up. 3. After answering, you can call intercom, take photos, open the door etc. Full duplex intercom call, which is more convenient to use. 6. Security Protection 1. Alarm Settings 1.Click Set 2. Choose Alarm Settings 3. Check whether the receiving alarm information bar is on and whether your account is on Alarm push ID list.

Alarm Settings: Receive alarm message: Opened by default. If closed, user cannot receive messages and alarm push. Alarm push ID: Add the first mobile phone by default configuration for bell.

8 Alarm Settings: Receive alarm message: Opened by default. If closed, user cannot receive messages and alarm push. Alarm push ID: Add the first mobile phone by default configuration for bell. Support Max. five accounts. Alarm push Binding mailbox. Bell will send visitor call and alarm images to the mailbox. Motion Detection: Closed by default. The bell alarm acts when object moves if motion detection is open. Buzzer: Closed by default. It will send out the alarm when the buzzer is open. PIR (Human Infrared Detection): Closed by default. Capture warming is more sensitive and accurate. 2. Protection and Removal Remove Protection Mode: Removal protection by default. Your mobile phone will not receive the alarm. Protection Mode: Your mobile phone will receive the alarm. 7. Device Other Information

Device Info: Display the current firmware information of the device. Date and Time: Set device time, the default automatic time synchronization network.

9 Device Info: Display the current firmware information of the device. Date and Time: Set device time, the default automatic time synchronization network. Media Settings: Set image format (N/P) and reversal. Security Settings: Modify Admin Password. Network Settings: Switch the wired network and WiFi network. Alarm Settings: Configure the door phone alarm information. Record Settings: Set the recording mode (optional, need to work with TF card). Defence Area: Not available Storage Setting: Check the TF card information Device Update: Check device firmware update 8. APP Function Introduction Playback: Play TF card recording (optional). Edit: Edit device name and password. Device: Display the device list. Message: Record the visitor and alarm messages. Image: Record the screenshot. More: My Account: Check and configure information about current account, modify the account password. Settings: Configuration alarm and call ring, automatically start and hang up, icon configuration. Update: Check APP update version System Notification: Important system notification About: APP description and version Add device by QR Code: As tips, scan the QR code to configure WiFi network and add IP doorbell. Alarm Management: Configure alarm interval and alarm shielding device. Sign Out: Sign out current account Exit: Exit APP

9. Indoor Dingdong Chime/Bell 1. 433MHz 2. Learning Code 3. Distance: 30-80m 4. 52 Musics Pairing Program Instruction 1. Select music before pairing. 2. Activate Pairing 2 ways as below: a.

When either operation above is finished, hearing Dong with LED indicator flash, press call button on IP doorbell in 5 seconds. It means pairing succeed if selected music is played. 3.

10 9. Indoor Dingdong Chime/Bell MHz 2. Learning Code 3. Distance: 30-80m Musics Pairing Program Instruction 1. Select music before pairing. 2. Activate Pairing 2 ways as below: a. Press both volume button and music button. b. Long press volume button for 5 seconds. When either operation above is finished, hearing Dong with LED indicator flash, press call button on IP doorbell in 5 seconds. It means pairing succeed if selected music is played. 3. Two or more indoor bell pairing - Follow point 2 once again to get paired one by one. 4. All pairing memory clearance - Long press music button for 5 seconds. 10. Main Specification Chipset Hi 3518E WiFi One-Key WiFi Connection Indoor Bell 433MHz, Learning Code, Distance: 80m Storage Support Max. 64GB TF Card Resolution 1.0MP - 720P (1280*720), VGA (640*480), QVGA (320*240) Audio Alarm Motion Detection Visual Angle Night Vision Support Protocol Item Size (L x W x H) Certificate Full-duplex Audio, G.711A PIR (The human body infrared sensor detection) 2.1mm Lens, 145 super wide angle 6pcs LED Lights, IR 3m, IR-Cut, no Color Change TCP/IP, UDP, SMTP, DHCP, UPnP, P2P, ONVIF 134 x 87 x 29mm ISO, CE, FCC, RoHS

IDoorBell Fon DP68 Quick Installation Guide

IDoorBell Fon DP68 Quick Installation Guide 1. Interface 1. Front Panel 2. Back Panel 2. Doorbell Installation Options and Rain Cover Mounting Note: For the best camera angle, position the camera around