Wall-mount box mini. Specifications

Transcription

1 Wall-mount box mini DATA SHEET DB4124-E Issue C Page 1 of 1 For indoor use. For termination of optical connectors. Prepared for splicing of pigtails (splice holder included). Adapter plates exists for most connector types. Optional clips for mounting on DIN profile. A simple indoor wall-mount box for termination of cables. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. Splice holder for securing the crimp sleeves when splicing pigtails and fibre guides for routing the fibre are included. An adapter plate must be ordered separately - depending on wanted connector type. The box has 2 round cable entrances and glands for both are included. Material: White aluminium Cable entrances: 1 with neoprene rubber membrane gland (TET 7-10) Hole size equals M20 1 with M20 gland For 6-13 mm cable Capacity (no. of connectors): 6 FC, ST, DIN 8 SC, E LC (when splicing) 16 LC (with direct termination) Dimensions: 110 x 150 x 35 mm (W x H x D) Weight: 0.5 kg Article numbers Wall-mount box, mini w/spliceholder Adapter plate, mini, 6 holes ST/FC Adapter plate, mini, 4 holes SC DPX/LC Quad Adapter plate, mini, 6 holes SC SPX/LC DPX Adapter plate, mini, 4 holes E2000 compact, DPX Closed front, mini Brackets, mini, kit Clips, DIN profile, kit

2 Wall-mount box midi PRO DATA SHEET DB4125-E Issue C Page 1 of 1 For indoor use. For termination of optical connectors. Prepared for splicing of pigtails. Integrated assembly board Adapter plates exists for most connector types. An indoor wall-mount box for efficient termination of cables. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. An adapter plate must be ordered separately - depending on wanted connector type. The box is delivered with a perforated assembly board for easy attachment of splice holders and fibre guides. Installation-set with these items may be ordered separately. The box has 2 round cable entrances and glands for both are included. Material: White aluminium Cable entrances: 1 with neoprene rubber membrane gland (TET 7-10) Hole size equals M20 1 with M20 gland For 6-13 mm cable Capacity (no. of connectors): 24 SC duplex, LC duplex 1, FC, ST, DIN, E * LC quad 2 Dimensions: 280 x 242 x 68 mm (W x H x D) Weight: 0.9 kg Article numbers Wall-mount box, midi PRO Adapter plate midi PRO, 24 holes ST/FC Closed front, midi PRO Adapter plate midi PRO, 12 holes SC DPX/LC QUAD Adapter plate midi PRO, 12 holes SC SPX/LC DPX Adapter plate midi PRO, 12 holes E2000 compact, DPX Installation-set, wall-mount box MP346 Splice holder, 12 splices, black In addition to when over 24 splices * When using 48 splices, 2 pcs. of MP346 splice holder must be ordered in addition to the installation set ) LC duplex uses , the adapter plate numbering will then be 1-12 (as for SC simplex) 2) LC quad uses , the adapter plate numbering will then be 1-24 (as for SC duplex)

3 Wall cabinet FOSS24 DATA SHEET DB4126-E Issue C Page 1 of 1 For indoor use. With lock. For splicing of cables. For termination of optical connectors. Prepared for splicing of pigtails. Integrated assembly board Adapter plates exists for most connector types. An indoor wall cabinet termination or splicing of optical cables. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. An adapter plate must be ordered separately - depending on wanted connector type. The cabinet is delivered with a perforated assembly board for easy attachment of splice holders and fibre guides. Installation-set with these items may be ordered separately. The cabinet has 9 round cable entrances, a PG16 gland is included, the rest of the entrances are blinded. Different types of PG-glands for cable and multi-glands for several patch cords may be delivered for the entrances. The cabinet may also be used for splicing one or more cables to each other. Material: White aluminium Cable entrances: 8 - size PG size PG 29 Capacity (no. of connectors): 24 SC, FC, ST, DIN, E * LC Dimensions: 280 x 300 x 75 mm (W x H x D) Weight: 2 kg Article numbers Wall cabinet, FOSS24, w/lock Adapter plate, FOSS24, 24 holes ST/FC Adapter plate, FOSS24, 12 holes SC DPX/LC QUAD Adapter plate, FOSS24, 12 holes E2000 compact, DPX Installation set, wall-mount box Cable gland, PG Cable gland, PG16, 5x3 mm C Cable gland, PG29, 8x5.5 mm, 10 pkn Cable gland, PG29, 24x3 mm Hole plug, PG Hole plug, PG29 MP346 Splice holder, 12 splices, black In addition to when over 24 splices * When using 48 splices, 2 pcs. of MP346 splice holder must be ordered in addition to the installation set

4 Installation set - Wall box DATA SHEET DB4127-E Issue B Page 1 of 1 Adapted to FOSS wall-mount boxes and cabinet. For efficient splicing of pigtails and storing of fibre. Installation set for simple and efficient termination and splicing in FOSS wall-mount boxes and cabinet. Contains splice holders, fibre clips and strain relief for fibre tubes as needed for the installation. Content MP346 Splice holder, 12 splices, black 2 SR-4050B Split lock, splice holder, black Fibre clip, large 8 SXA Holder, strain relief 1 SXA strain relief, rubber 3 SXA strain relief, steel 3 Article number Installation set, wall-mount box

5 Wall-mount box FTH indoors DATA SHEET DB4150-E Issue B Page 1 of 2 Wall-mount box for up to 4 SC/PC or SC/APC connectors. Adapters with automatic shutters. Capacity for splicing up to 4 pigtails. Simple instalment of pre-terminated subscriber cable. 60 mm screw holes for mounting on an in-wall box (hidden cabling). Bracket for mounting on wall and DIN-rail. 83x100x27 mm (HxWxD) The wall-mount box is suited for use in the home for terminating incoming subscriber cable in an SC/PC or SC/APC interface. The connection may be done by splicing the subscriber cable in the box. An option is also to install a pre-terminated subscriber cable directly in the box, or you may buy a pre-terminated wall-mount box with a defined cable length. The wall-mount box is normally mounted close to the home central. Connection to this is done using a subscriber patch cord. When running cable in a house the cable may be exposed to more severe bends than are normal in other parts of the network. This requires a fibre that is more insensitive to these types of effects. The subscriber patch cord/cable contains fibre according to ITU-T G.657.A2. Pigtails contain fibre according to ITU-T G.657.A1. Number of cable entrances: 2 bottom, 1 top, 1 left, 1 right, 1 rear Largest cable diameter: 6 mm Capacity connectors: 4 SC/PC or SC/APC With shutter Capacity splices: 4 45 mm splice protector Operating temperature: -20 o C til +50 o C Dimensions: 83x100x27 mm (HxWxD) Colour: White RAL9016 Subscriber cable: 1, 2 or 4 fibre 4.5 mm white without marking Fibre type subscriber cable: Bend insensitive fibre according to ITU-T G.657.A2 Fibre type pigtails: Bend insensitive fibre according to ITU-T G.657.A1

6 DATA SHEET DB4150-E Issue B Page 2 of 2 Article number Wall-mount box and adapters XCPSC01135 XPPSC00335 XPPSC00336 Wall-mount box, FTH, 4 holes SC Adapter, SC SPX w/shutter, blue, 10 pcs Adapter, SC/APC w/shutter, green, 10 pcs Pre-terminated wall-mount box with 1 fibre XCPS01135/1SSC-xxx Wall-mount box, 1xSC/PC, 9/OS2/4500, xx.x m white XCPS01135/1SSCA-xxx Wall-mount box, 1xSC/APC, 9/OS2/4500, xx.x m white Pre-terminated wall-mount box with 2 fibres XCPS01135/2SSC-xxx Wall-mount box, 2xSC/PC, 9/OS2/4500, xx.x m white XCPS01135/2SSCA-xxx Wall-mount box, 2xSC/APC, 9/OS2/4500, xx.x m white Wall-mount box may also be delivered with 4 fibres. Contact us for more information. Gallery Wall-mount box connected to home central and out-going subscriber cable Adapters with shutter Wall-mount box with 2 SC/APC pigtails Pre-terminated wall-mount box with 1-fiber subscriber cable and SC/APC connector Wall-mount box with 1 SC/APC connector mounted on the wall Pre-terminated wall-mount box with subscriber cable

7 Cabinet DATA SHEET DB4155-E Issue A Page 1 of 2 For use in hazardous environment. For splicing cables. For terminated cable. Prepared for splicing of pigtails. Adapter bracket for ST connector (others available). A wall cabinet for hazardous environment specially adapted for termination or splicing of fibre optical cables. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. The cabinet may also be used for splicing one or more cables to each other. Adapter brackets for ST connectors are included. Brackets for LC or SC adapters may be ordered separately. The cabinet is also delivered with splice holders for 12 splices and fibre guides installed. Extra splice holders may be ordered if more than 12 splices is needed. These are then stacked on top of the first one. The cabinet may be ordered with cut outs for Ex-glands. Different types of Ex-glands may be ordered separately. Type of protection: EEx e II T6 (T amb 40 C) EEx e II T4 (T amb 90 C) EEx ed IIC T4/T5/T6 (T amb 40 C) IP66 / IP67 Protection: Material: AISI 316L / EN Finish: Electro polished Grounding: Inside on busbar or terminals. External earth bolt on fixing bracket Weight: Approx. 7,5 kg. (empty box) Gasket: EPDM / Silicone Dimensions (inside) 280 x 318 x 150 mm (HxWxD) Dimensions (outside) 326 x 374 x 160 mm (HxWxD) Only appropriate ATEX certified glands and blanks must be used. These components must at least have a degree of protection IP6x. Included: 1 Splice holder for 12 splices. 2 Fibre cross w/fibre guides 2 Fibre clips w/tape 2 Adapter brackets for up to 16 ST adapters (8 each) 2 Strain relief brackets for FRP elements

8 DATA SHEET DB4155-E Issue A Page 2 of 2 Article number Cabinet IP66/67 Exe 326x374x160mm w/installation set Accessories Cable Gland, brass, ICG-653, mm, M Cable Gland, brass, ICG-653, mm, M Cable Gland, brass, 501/421, 3-8mm, M Cable Gland, brass, 501/421, , M Cable Gland, brass, 501/421, M Cable Gland, brass, 501/421, mm, M Cable Gland, brass, 501/421, mm, M Cable Gland, brass, 501/453, mm, M Cable Gland, brass, 501/453, mm, M Breather drain, M20 EExe, brass Breather drain, M25 EExe, brass Blind plug, M20, EExde, brass Blind plug, M25, EExde, brass Locknut, brass, M Locknut, brass, M Adapter bracket, BUDI-1S, 2x8 SC SPX Adapter bracket, BUDI-S/M, 6x8 SC SPX MP346 Splice holder, 12 splices, black