including the locations according to annex

Size: px
Start display at page:

Download "including the locations according to annex"

Transcription

1 Certificate Certificate Holder: Siemens Factory Automation Engineering Ltd. Registration Address: No. 1, Jiuxianqiao East Rd., Chaoyang Operation Address: Building A1, No. 9, Jiuxianqiao East Rd., Chaoyang including the locations according to annex Scope: Design, Assembling, Testing, Commissioning and Service of Industrial Control Cabinets; Design, Production and Service of LV Power Distribution Cabinets; Design, Programming, Commissioning and Service of Industrial Automation Engineering Project. Design (Except Mechanical Design), General Assembly, Commissioning and Service for Automotive Production Line and Its Equipment; Pre-sale Technical Support and After-sale Service of SIEMENS Automation and Drive Products; Retrofitting, Commissioning and Service of Industrial Electric System Proof has been furnished by means of an audit that the requirements of ISO 9001:2015 are met. Validity: The certificate is valid from until It remains valid subject to satisfactory surveillance audits. First certification 2014 This certificate information can be searched on CNCA official website TÜV Rheinland Cert GmbH Am Grauen Stein Köln

2 No. Location Scope /01 Siemens Factory Automation Engineering Co., Ltd. Registration Address: No. 1, Jiuxianqiao East Rd., Chaoyang Operation Address: Building A1, No. 9, Jiuxianqiao East Rd., Chaoyang Design, Programming, Commissioning and Service of Industrial Automation Engineering Project; Pre-sale Technical Support and After-sale Service of SIEMENS Automation and Drive Products; Retrofitting, Commissioning and Service of Industrial Electric System; Design and Service of Industrial Control Cabinets and LV Power Distribution Cabinets /02 Siemens Factory Automation Engineering Ltd. Shanghai No. 1 Branch Registration Address: No. 38, Youdong Rd., Minhang District, Shanghai , P. R. China Operation Address: Floor 22~25 Xuhuiyuan Building, No. 1089, Zhongshan No. 2 South Rd., Xuhui District, Shanghai , P. R. China Design, Testing, Commissioning and Service of Industrial Control Cabinets; Design, Programming, Commissioning and Service of Industrial Automation Engineering Project; Pre-sale Technical Support and After-sale Service of SIEMENS Automation and Drive Products; Retrofitting, Commissioning and Service of Industrial Electric System Page 1 of 4

3 /03 Siemens Factory Automation Engineering Ltd. Shanghai No. 2 Branch M Registration Address: No. 6, Building, No. 1258, Boxue Rd., Malu, Jiading District, Shanghai , P. R. China Operation Address: No. 4~6, Building, No. 1258, Boxue Rd., Malu, Jiading District, Shanghai , P. R. China Design (Except Mechanical Design), General Assembly, Commissioning and Service for Automotive Production Line and its Equipment /04 Siemens Factory Automation Engineering Ltd. Anshan Branch C Registration Address: No. 452, Qianan Rd., Tiedong District, Anshan, Liaoning Province , P. R. China Production and Service of LV Power Distribution Cabinets Page 2 of 4

4 /06 Siemens Factory Automation Engineering Ltd. Shanghai Branch I Youdong Rd. Workshop Registration Address: No. 38, Youdong Rd., Minhang District, Shanghai , P. R. China /07 Siemens Factory Automation Engineering Ltd. CS CCC Registration address: No. 7, Zhonghuan Nanlu, Chaoyang District, Beijing , P. R. China Operation address: same as above Testing and Commissioning of Industrial Control Cabinets, Site Service Customer Service /08 Siemens Factory Automation Engineering Co., Ltd. Shunyi Factory Registration Address: No. 1, Jiuxianqiao East Rd., Chaoyang Operation Address: No. 101, Floor1, No. 8 building, Mao hua Industry Park, No. 1 of Cai Da Third Street, Nan Cai Town, Shun Yi District, Beijing , P. R. China Assembling, Testing, Commissioning and Service of Industrial Control Cabinets Page 3 of 4

5 /09 Siemens Factory Automation Engineering Ltd. Shanghai Branch I Training Registration Address: Floor 5, Juvenile & Children's Publishing House Building, No. 1538, Yan An Xi Rd., Shanghai , P. R. China Training Service for Customer TÜV Rheinland Cert GmbH Am Grauen Stein Köln Page 4 of 4

Test reports for the determination of B 10d values for emergency stop switches of families 800F, 800H, 800T and D7 of Rockwell Automation

Test reports for the determination of B 10d values for emergency stop switches of families 800F, 800H, 800T and D7 of Rockwell Automation Report about the inspection of test reports for the determination of B 10d values for emergency stop switches of families, 800H, 800T and of Rockwell Automation Report-No.: 968/EL 660.01/10 Date: 2010-06-08

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) TüVF=hein and'] f Pracisely F±ight. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000053814 AMs designation: A02000-Magnos28 for 02 Manufacturer: Test Laboratory: ABB Automation GmbH Stierstädter

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000053812 Certified AMS: Manufacturer: Test lnstitute: FDM 11 Standard (dust monitor) PCME Ltd. Clearview Building

More information

CERTIFICATE of Product Conformity (QAL1)

CERTIFICATE of Product Conformity (QAL1) JÄ TÜVF=heinland`:.ä;' Preci ely Right. CERTIFICATE of Product Conformity (QAL1) Certificate No.: 0000038506 02 AMs designation: lvlanufacturer: Test Laboratory: Modell 6888Afor02 Rosemount l nc. 8200

More information

Functional safety according to IEC / IEC Important user information. Major changes in IEC nd Edition

Functional safety according to IEC / IEC Important user information. Major changes in IEC nd Edition International Symposium in China Functional Safety in Industrial Applications 18 19 October 2011, Shanghai - China Functional safety according to IEC 61508 / IEC 61511 Important user information Major

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVF}heinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000059868 AMs designation: Manufacturer: Test Laboratory: FIDAMAT 6 MEASURING SYSTEM fortoc SIEMENS AG Östliche

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland{ ' Precisely Föght CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000038496_01 AMs designation: Manufacturer: Test Laboratory: PCME QAL 181 fortotaldust PCME Ltd. 60 Edison Road

More information

CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: _02

CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: _02 Umwelt Bundes Amt For our Environment /;;!.. TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000001014_02 Certified AMS: Manufacturer: Test Institute: 4500

More information

CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: ENDA-5000 with analysing module CMA-5800 for NOx. S0 2, CO, co2 and 02

CERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: ENDA-5000 with analysing module CMA-5800 for NOx. S0 2, CO, co2 and 02 Umwelt Bundes Amt @ For our Environment /;;!.. TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000035010 Certified AMS: : Test Institute: with analysing

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland Precisely F}ight. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000053803 Certified AMS: Manufacturer: Test lnstitute: D-R 808 for dust DURAG GmbH Kollaustr.105 Hamburg German

More information

Declaration of conformity - Safety relays 14:2. Declaration of conformity - JSBR4 14:3. Declaration of conformity - Vital 1 14:4

Declaration of conformity - Safety relays 14:2. Declaration of conformity - JSBR4 14:3. Declaration of conformity - Vital 1 14:4 Contents Page Declaration of conformity - Safety relays 14:2 Declaration of conformity - JSBR4 14:3 Declaration of conformity - Vital 1 14:4 Declaration of conformity - Eden, Tina, FMC-Tina and Magne 14:5

More information

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013

Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-06 according to DIN EN ISO/IEC 17065:2013 Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße 20, 45141 Essen

More information

CERTIFICATE. about Product Conformity {QAL 1) Number of Certificate: _02

CERTIFICATE. about Product Conformity {QAL 1) Number of Certificate: _02 Umwelt Bundes Amt For our Environment /;;;!. TÜVRheinland Precisely Right. CERTIFICATE about Product Conformity {QAL 1) Number of Certificate: 0000026912_02 Certified AMS: Manufacturer: Test Institute:

More information

CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 28 July 2016

CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 28 July 2016 I Umwelt Bundes Amt @ For our Environment A TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity {QAL 1) Number of Certificate: 0000001013_01 ------------------------------------------------------------------

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000035015 03 Certified AMS: Manufacturer: Test lnstitute: MERCEM300Z for Hg SICK AG Rengol9shauser Str. 17 a 88662

More information

CONFIRMATION of Product Conformity (QAL1)

CONFIRMATION of Product Conformity (QAL1) CONFIRMATION of Product Conformity (QAL1) AMS designation: Manufacturer: Test Laboratory: Fidas 200 S, Fidas 200 and Fidas 200 E for suspended particulate matter PM 10 and PM 2,5 PALAS GmbH Greschbachstraße

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland'ä` Procis Iy Ftight. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000032301_01 AMs designation: fornox, S02, CO, C02and 02 Manufacturer: Test Laboratory: HORIBA Europe GmbH

More information

IECEx Certificate of Conformity

IECEx Certificate of Conformity IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:

More information

International TÜV Rheinland Symposium in China

International TÜV Rheinland Symposium in China International TÜV Rheinland Symposium in Functional Safety in Industrial Applications October 18 19, 2011 Shanghai In cooperation with: ABB Ltd., United Kingdom - ABB () Limited, - Altera GmbH, Germany

More information

Automation, Software und Informationstechnologie

Automation, Software und Informationstechnologie Automation, Software und Informationstechnologie Report on the type approval of the Adjustable Frequency AC Drives PowerFlex 753 and 755 of Rockwell Automation Inc. Bericht-Nr.: 968/EZ 334.00/08 Datum:

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Cerlificate number: 0000051693_03 Certified AMS: Manufacturer: Test lnstitute: HM 1400 TRX for mercury DURAG GmbH Kollaustraße 105

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12158-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-09-19 to 2019-09-03 Date of issue: 2018-09-19

More information

CERTIFICATE of Product Conformity (QAL1)

CERTIFICATE of Product Conformity (QAL1) ATÜVRheinland Precisely F=ight. CERTIFICATE of Product Conformity (QAL1) Certificate No.: 0000036943 02 Certified AMS: Manufacturer: Test lnstitute: DUSTHUNTER SB100 for dust SICK Engineering GmbH Bergener

More information

Company Introduction TOP SENSOR SANITARY WARES SOLUTION SUPPLIER. Sensor Sanitary Wares Excellent Technology Partner. January 2017 INAX MOEN

Company Introduction TOP SENSOR SANITARY WARES SOLUTION SUPPLIER. Sensor Sanitary Wares Excellent Technology Partner. January 2017 INAX MOEN TOP SENSOR SANITARY WARES SOLUTION SUPPLIER Company Introduction January 2017 Company Introduction - January 2017 1/17 Basic Fact Founded in 1997 in Zhongshan, China. 20000 m 2 plant, 300 employees, R

More information

CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 19July2017. Köln, 17 August2012

CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 19July2017. Köln, 17 August2012 Umwelt Bundes Amt For our Environment A TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1} Number of Certificate: 0000036942 Certified AMS: Manufacturer: Test Institute: Dusthunter

More information

RCM-C Vinyl Cleaner. Part List: Operation conditions:

RCM-C Vinyl Cleaner. Part List: Operation conditions: RCM-C Vinyl Cleaner Thank you very much for using the RCM-C cotton thread vinyl record cleaner. This machine adopts efficient wire cleaning technology, which uses special cotton thread to reverse the groove

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHANGHAI INSPECTION AND TESTING INSTITUTE OF INSTRUMENTS AND AUTOMATION SYSTEMS CO., LTD. 103 Cao Bao Road Shanghai, 200233 People s Republic of China Mr. Xu

More information

Certificate: _02 / 22 March 2013

Certificate: _02 / 22 March 2013 Test report: 936/21216334/D of 17 September 2012 Initial certification: 02 March 2012 Expiry date: 01 March 2017 Publication: BAnz AT 05 March 2013 B10, chapter II, No. 2.1 Approved application The tested

More information

Certificate: / 9 February 2011

Certificate: / 9 February 2011 Test report: 936/21212470/A of 1 October 2010 First certification: 26 January 2011 Run of validity until: 25 January 2016 Publication BAnz. 26 January 2011, No. 14, p. 294, Chapter I No. 1.1 Approved application

More information

Beyond Expectation CHINA

Beyond Expectation CHINA Beyond Expectation CHINA Having a global network means that ASSAB's support is within reach no matter where you are. ASSAB China ASSAB's position as an industry leader for the best-known brand in high-performing

More information

CERTIFICATE. Conformity of the Factory Production Control CPR TÜVRh

CERTIFICATE. Conformity of the Factory Production Control CPR TÜVRh CERTIFICATE Conformity of the Factory Production Control 0035-CPR-1090-1.00794.TÜVRh.2017.003 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No. : 0000027201 01 Certified AMS: Manufacturer: Test lnstitute: OPSIS SM 200 with pmio-pre-separator OPSIS AB Box 244

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland']B:' Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Ceriificate No.: 0000028733 02 AMs designation: Manufacturer: SWAM 5a Dual Channel Monitor, SWAM 5a Dual Channel Hourly Mode

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000028731 01 Certified AMS: Manufacturer: Test lnstitute: D-R 800 for dust DUFUG GmbH Kollaustraße 105 22453 Hamburg

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11120-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 16.01.2018 to 15.01.2023 Holder of certificate: TÜV

More information

WORLD TRADE ORGANIZATION

WORLD TRADE ORGANIZATION WORLD TRADE ORGANIZATION Committee on Technical Barriers to Trade G/TBT/W/235 6 November 2003 (03-5922) Original: English ANNUAL TRANSITIONAL REVIEW MANDATED IN PARAGRAPH 18 OF THE PROTOCOL OF ACCESSION

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Ceriificate No.: 0000036942 01 Certified AMS: Manufacturer: Test lnstitute: DUSTHUNTER C200 for dust SICK Engineering GmbH Bergener

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12158-02-02 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-10-25 to 2021-03-30 Date of issue: 2017-10-25

More information

Certificate: _01 / 19 August 2011

Certificate: _01 / 19 August 2011 Test report: 936/21209919/A of 26 March 2010 First certification: 02 August 2010 Run of validity until: 01 August 2015 Publication BAnz. 28 July 2010, No 111, page 2598 Approved application The AMS is

More information

Management Systems Certification Ltd

Management Systems Certification Ltd Management Systems Certification Ltd 48 South Street, New Ross, Co. Wexford Management Systems Certification Body Registration number: 5011 is accredited by the Irish National Board (INAB) to undertake

More information

IECEx Certificate of Conformity

IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue No.:3 Status: Current Date of Issue: 2010-10-04

More information

Certificate: _01 / 22 March 2013

Certificate: _01 / 22 March 2013 Test report: 936/21219384/B of 27 September 2012 Initial certification: 20 July 2012 Expiry date: 19 July 2017 Publication: BAnz AT 05 March 2013 B10, chapter I, No. 1.5 Approved application The tested

More information

Beyond Expectation CHINA

Beyond Expectation CHINA Beyond Expectation CHINA As a part of the global network of Uddeholm, ASSAB s support is within reach no matter where you are. ASSAB China ASSAB's position as an industry leader for the best known brand

More information

CERTIFICATE. with the organizational units/sites as listed in the annex

CERTIFICATE. with the organizational units/sites as listed in the annex CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Design, engineering, manufacturing and sales

More information

Certificate: _01 / 29 April 2014

Certificate: _01 / 29 April 2014 Test report: 936/21212540/D of 08 October 2013 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 01 April 2014 B12, chapter I, No. 2.2 Approved application The tested

More information

CERTIFICATE of Product Conformity (QAL1)

CERTIFICATE of Product Conformity (QAL1) JÄ TüVFtheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1) Certificate No.: 0000039320_01 AMsdesignation: Manufacturer: Test Laboratory: Modell49ifor03 Thermo Fisher scientific 27 Forge

More information

CERTIFICATE. OSRAM GmbH Marcel-Breuer-Straße München Germany ISO 14001:2015

CERTIFICATE. OSRAM GmbH Marcel-Breuer-Straße München Germany ISO 14001:2015 CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that Marcel-Breuer-Straße 6 80807 München including the sites and scope of application see enclosure has established and

More information

_03 / 28 July 2015

_03 / 28 July 2015 Test report: 936/21221789/B of 19 March 2013 Initial certification: 02 August 2010 Certificate: renewal (previous certificate 0000027277_02 of 20 August 2013 valid until 01 August 2015) Date of expiry:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TÜV SÜD CERTIFICATION AND TESTING (CHINA) CO., LTD. 1 SHANGHAI BRANCH 3-13 F No. 151 Heng Tong Road Shanghai, 200 070, People's Republic of China Testing Location:

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No. : 0000028749 01 Certified AMS: Manufacturer: Test lnstitute: D-R 290 for dust DUFLAG GmbH Kollaustraße 105 22453

More information

ECB S Recommendation for Service, Repair and Modification Operations on ECB S Certified Secure Storage Units, Data Cabinets and Data Rooms

ECB S Recommendation for Service, Repair and Modification Operations on ECB S Certified Secure Storage Units, Data Cabinets and Data Rooms ECB S Recommendation for Service, Repair and Modification Operations on ECB S Certified Secure Storage Units, Data Cabinets and Data Rooms ECB S R11 Content 1 Preamble... 2 2 Scope and purpose... 2 3 Normative

More information

China Orthopaedic Instrument Import and Export TOP25 Report, Jan. 2013

China Orthopaedic Instrument Import and Export TOP25 Report, Jan. 2013 China Orthopaedic Instrument Import and Export TOP25 Report, 2012 Jan. 2013 STUDY GOAL AND OBJECTIVES This report provides the industry executives with strategically significant competitor information,

More information

CERTIFICATE. Renesas Semiconductor Package & Test Solutions Co., Ltd. Oita Factory 4200 Idoda, Nakatsu-shi, Oita Japan

CERTIFICATE. Renesas Semiconductor Package & Test Solutions Co., Ltd. Oita Factory 4200 Idoda, Nakatsu-shi, Oita Japan CERTIFICATE This is to certify that has implemented and maintains a Quality Management System. : The design and manufacture of semiconductor devices. An audit, conducted and documented in a report, has

More information

APPLICATION FOR THE CERTIFICATION/ ASSESSMENT OF A MANAGEMENT SYSTEM C C C

APPLICATION FOR THE CERTIFICATION/ ASSESSMENT OF A MANAGEMENT SYSTEM C C C C C C CYPRUS CERTIFICATION COMPANY Α. COMPANY INFORMATION COMPANY NAME: (in Greek) (in English)......... Company Registration Number:.... COMPANY ADDRESS: (in Greek).... (in English)..... CITY: Post Code:..

More information

CERTIFICATE. Scope: The design and manufacture of semiconductor devices.

CERTIFICATE. Scope: The design and manufacture of semiconductor devices. CERTIFICATE This is to certify that has implemented and maintains a Quality Management System. : The design and manufacture of semiconductor devices. An audit, conducted and documented in a report, has

More information

GB/T / IEC 62423:2009

GB/T / IEC 62423:2009 Translated English of Chinese Standard: GB/T22794-2017 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 29.120;29.120.50

More information

CERTIFICATE. Scope: The design and manufacture of semiconductor devices.

CERTIFICATE. Scope: The design and manufacture of semiconductor devices. CERTIFICATE This is to certify that has implemented and maintains a Quality Management System. : The design and manufacture of semiconductor devices. An audit, conducted and documented in a report, has

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000050625 Certified AMS: Manufacturer: Test lnstitute: A02000-Fidas24 for TOC ABB Automation GmbH Stierstädter

More information

sustainable transport in asia

sustainable transport in asia sustainable transport in asia mva in asia MVA is a global transportation specialist and leading market research consultancy specializing in traffic engineering and transport planning and operations. MVA

More information

Do you manufacture equipment or protective systems for use in potentially explosive atmospheres? Do you process, trade or import them?

Do you manufacture equipment or protective systems for use in potentially explosive atmospheres? Do you process, trade or import them? TÜV NORD CERT GmbH Geschäftsstelle Hannover Am TÜV 1 30519 Hannover Zertifizierung Certification body for equipment according to Directive 94/9/EC of TÜV NORD CERT GmbH Summarized Information Directive

More information

Corporate Presentation

Corporate Presentation Corporate Presentation October 2009 NWDS-CAD-r260_Final (HK Stock Code: 825) 1 Safe Harbour Statement The information contained in our presentation is intended solely for your personal reference. In addition,

More information

Safety Integrity Verification and Validation of a High Integrity Pressure Protection System to IEC 61511

Safety Integrity Verification and Validation of a High Integrity Pressure Protection System to IEC 61511 TÜV Rheinland International Symposium in China Functional Safety in Industrial Applications October 18 19, 2011 in Shanghai China Safety Integrity Verification and Validation of a High Integrity Pressure

More information

OMRON Scientific Technologies Inc. Mr. Doug Barnett 6550 Dumbarton Circle Fremont, CA United States of America

OMRON Scientific Technologies Inc. Mr. Doug Barnett 6550 Dumbarton Circle Fremont, CA United States of America TÜV Rheinland Industrie Service GmbH Postfach, 51101 Köln OMRON Scientific Technologies Inc. Mr. Doug Barnett 6550 Dumbarton Circle Fremont, CA 94555-3605 United States of America Martin Kiontke Kst. 968

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS NATURAL GAS LOWER BURNER UPGRADE KIT INSTRUCTIONS DUKE KIT#s: 600295 (Style 1) and 600300 (Style 2) A B C This kit contains: A. (1) V-Shaped Pan 176397 B. (1) Main Grease Pan

More information

Certificate: _01 / 22 March 2013

Certificate: _01 / 22 March 2013 Test report: 936/21219384/A of 27 September 2012 Initial certification: 20 July 2012 Expiry date: 19 July 2017 Publication: BAnz AT 05 March 2013 B10, chapter I, No. 1.6 Approved application The tested

More information

GSO Certification. The key to successful home appliance sales in the Gulf region.

GSO Certification. The key to successful home appliance sales in the Gulf region. GSO Certification The key to successful home appliance sales in the Gulf region. www.tuv.com Contents OVERVIEW GSO FAST FACTS UNDERSTANDING REGIONAL CONFORMITY 05 Looking at lists 05 Roles & responsibilities

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE CERTIFICATION SERVICES INC. 1 Kunshan Laboratory No. 10 Wei ye Road Innovation Park Eco & Tec. Development Zone Kunshan City, Jiangsu, People s Republic

More information

PRYSMIAN. 2 prysmian company profile

PRYSMIAN. 2 prysmian company profile PRYSMIAN CHINA 2011 PRYSMIAN IN THE Greater CHINA 1 2 3 4 6 8 5 7 1 2 3 4 5 6 7 8 Prysmian(China)Investment Company Limited Prysmian Tianjin Cables Co.,Ltd. Prysmian Angel Tianjin Cable Co.,Ltd. Prysmian

More information

Lamp Circuit Power Test Report

Lamp Circuit Power Test Report Report : 3192007.50P Lamp Circuit Power Report To : GE (Lighting) Co., Ltd. Tel : -- Building E, Longcheer Park,.29, Jinye 1 st Fax : -- Road, 710065, Xi an, China Attn : James Guo Supplier : Sichuan Hongrui

More information

CERTIFICATE. AXITEC GmbH Otto-Lilienthal-Str. 5 D Böblingen ISO 9001:2008

CERTIFICATE. AXITEC GmbH Otto-Lilienthal-Str. 5 D Böblingen ISO 9001:2008 CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that AXITEC GmbH Otto-Lilienthal-Str. 5 D-71034 Böblingen has established and applies a Quality Management System for Contract

More information

Certificate: _01 / 20 August 2013

Certificate: _01 / 20 August 2013 Test report: 936/21218492/B of 22 January 2013 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 23 July 2013 B4, chapter II, No. 2.2 Approved application The tested

More information

Automation, Functional Safety. Assessment of the Point Guard Analog Input Safety Modules 1734-IE4S and 1734-IE4SXT Rockwell Automation, USA

Automation, Functional Safety. Assessment of the Point Guard Analog Input Safety Modules 1734-IE4S and 1734-IE4SXT Rockwell Automation, USA Automation, Functional Safety Assessment of the Point Guard Analog Input Safety Modules 1734-IE4S and 1734-IE4SXT, USA Report-No.: 968/EZ 480.01/12 Date: 2012-02-28 Report-No.: 968/EZ 480.01/12 Page 1

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate number: 0000001014_03 Certified AMS: Manufacturer: Test lnstitute: 4500 MKlll for dust Land lnstruments lnternational

More information

INSPECTION REPORT Nr IDD/S-09/922

INSPECTION REPORT Nr IDD/S-09/922 Page: 1/7 PROJECT: TPI For Sheet Pile BV Client: Manufacturer: Nanjing Grand Steel Piling Co., Ltd. Inspection requested by: Ref: P/o nr: (client to BV) P/o nr: GP09111101 (client to Manufacturer) SUPPLY

More information

PRODUCT CONFORMITY CERTIFICATE

PRODUCT CONFORMITY CERTIFICATE PRODUCT CONFORMITY CERTIFICATE This is to certify that the AR500 Open Path Monitor Manufactured by: Opsis AB PO Box 244 5-244 02 Furulund Sweden Has been assessed by Sira Certification Service And for

More information

Wet alarm valve stations

Wet alarm valve stations VdS Guidelines for water extinguishing systems VdS 2100-01en Requirements and test methods VdS 2100-01en : 2011-05 (02) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,

More information

LATCH UP TEST REPORT

LATCH UP TEST REPORT 1F Xinyicheng C Building, No.1618 Yishan Rd., Shanghai City, China. Page 1 of 8 LATCH UP TEST REPORT Company Address :Vango Technologies, Inc. :F/9, Haiyue Building, 788 Danfeng Rd, Binjiang District,

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland'ä ' Prcciscly Ftight. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000056508_01 AMs designation: Manufacturer: Test Laboratory: LDS 6 7M86121 with cd 6 7M86122 sensorfor NH3

More information

CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: _03. V-CEM5100 for waste gas velocity. TÜV Rheinland Energy GmbH

CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: _03. V-CEM5100 for waste gas velocity. TÜV Rheinland Energy GmbH ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000035006_03 Certified AMS: Manufacturer: V-CEM5100 for waste gas velocity CODEL lnternational Ltd. Station Road,

More information

CERTIFICATE IQNet and DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen hereby certify that the company

CERTIFICATE IQNet and DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen hereby certify that the company CERTIFICATE IQNet and DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen hereby certify that the company with the organizational units/sites as listed in the annex has implemented

More information

FUNCTIONAL SAFETY INCREMENTAL ENCODERS MASTERING SPEED CONTROL

FUNCTIONAL SAFETY INCREMENTAL ENCODERS MASTERING SPEED CONTROL FUNCTIONAL SAFETY INCREMENTAL ENCODERS MASTERING SPEED CONTROL Up to SIL3 and PLe SENSATA TECHNOLOGIES LOCATIONS Manufacturing and warehouse centers Business centers Sales s ABOUT BEI SENSORS BEI Sensors

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE ENGINEERING PTY LTD 90 Indian Drive Keysborough, Victoria 3173, AUSTRALIA Mr. Simon Grilj Phone: 61 3 9763 3079 Email: simon@compeng.com.au ELECTRICAL

More information

Certificate: _01 / 2 February 2015

Certificate: _01 / 2 February 2015 Test report: 936/21210059/A of 21 October 2009 Initial certification: 12 February 2010 Certificate: renewal (previous certificate 0000025931 of 10 March 2010 valid until 11 February 2015) Expiry date:

More information

1st City Issues Tongji International Symposium City & Real Estate Risk Management 2010

1st City Issues Tongji International Symposium City & Real Estate Risk Management 2010 1st City Issues Tongji International Symposium City & Real Estate Risk Management 2010 (CI-TIS) Shanghai, China 16 17 October 2010 Editors: Nan-kai Xia Fang He ISBN: 978-1-61782-859-1 Printed from e-media

More information

Product Testing. Vacuum cleaner ecodesign and energy labeling requirements EU 665/2013 & EU 666/2013

Product Testing. Vacuum cleaner ecodesign and energy labeling requirements EU 665/2013 & EU 666/2013 Product Testing Vacuum cleaner ecodesign and energy labeling requirements EU 665/2013 & EU 666/2013 On July the 13 th, 2013, the EU 665/2013 & EU 666/2013 directives were officially published on the Official

More information

Rosemount 1595 Conditioning Orifice Plate

Rosemount 1595 Conditioning Orifice Plate Quick Installation Guide December 2007 Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Start Step 1: Primary Element Location Step 2: Primary Element Orientation Step 3: Primary Element Installation

More information

Multi Key Panel Door Interlock User Manual - Original Language Version

Multi Key Panel Door Interlock User Manual - Original Language Version D D-FS-F-1S-RE-MS-4 The D Lock is a two part access interlock comprising of a main body and catch complete with secondary lock portions. The catch is available in two options, one suited to well aligned

More information

Siemens R&D in China. Corporate Technology

Siemens R&D in China. Corporate Technology Siemens R&D in China Siemens is one of the world s most innovative companies. The company aims to be a trendsetter in all its business sectors, and to shape its technologies with a clear focus on delivering

More information

Certificate: / 29 April 2014

Certificate: / 29 April 2014 Test report: 936/21217455/A of 10 September 2013 Initial certification: 01 April 2014 Expiry date: 31 March 2019 Publication: BAnz AT 01 April 2014 B12, chapter I, No. 1.1 Approved application The tested

More information

Siemens R&D in China. Corporate Technology

Siemens R&D in China. Corporate Technology Siemens R&D in China Siemens is one of the world s most innovative companies. The company aims to be a trendsetter in all its business sectors, and to shape its technologies with a clear focus on delivering

More information

MADE IN ITALY. thermowatt.com. the heart of electric appliances

MADE IN ITALY. thermowatt.com. the heart of electric appliances MADE IN ITALY 1 the heart of electric appliances MADE IN ITALY 2 the heart of electric appliances History Founded in the early 1950s, today Thermowatt is one of the top global manufacturers of heating

More information

DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID. NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008)

DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID. NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008) STAATSKOERANT, 19 NOVEMBER 2010 No.33763 11 No. R. 1072 DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID 19 November 2010 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5

More information

CERTIFICATE of Product Conformity (QAL1)

CERTIFICATE of Product Conformity (QAL1) ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1) Certificate No.: 0000036945_02 Certified AMS: Manufacturer: Test lnstitute: DUSTHUNTER SP100 for dust SICK Engineering GmbH Bergener

More information

CERTIFICATE of Product Conformity (QAL1 )

CERTIFICATE of Product Conformity (QAL1 ) ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Ceriificate No.: 0000028729_02 Certified AMS: Manufacturer: Test lnstitute: GM700-2 for HF SICK AG Nimburger Str. 11 79276 Reute

More information

Functional Safety incremental encoders

Functional Safety incremental encoders Functional Safety incremental encoders Up to SIL3 and PLe Mastering speed control 1 About BEI Sensors BEI Sensors production centre in Strasbourg, France BEI Sensors specializes in speed and position sensors

More information

Australian Standard. Functional safety Safety instrumented systems for the process industry sector

Australian Standard. Functional safety Safety instrumented systems for the process industry sector AS IEC 61511.2 2004 IEC 61511-2:2003 AS IEC 61511.2 Australian Standard Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of AS IEC 61511.1

More information

DAISHIBA Heating & Refrigeration Equipment Co., Ltd

DAISHIBA Heating & Refrigeration Equipment Co., Ltd DAISHIBA Heating & Refrigeration Equipment Co., Ltd DAISHIBA is a professional company engaged in sales, R&D and production of refrigeration and heating products. We have rich experience in refrigeration

More information

2013 in. Automation. Shakti

2013 in. Automation. Shakti TÜV Rheinland International Symposium in Brasil Functional Safety in Industrial Applications June 25-26, 2013 in Portoo Alegre, Brasil In cooperation with: ABB Brasil LTDA, Brasil ACE Schmersal Eletroeletrônica

More information

INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA

INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA Translated English of Chinese Standard: JG/T285-2010 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Wayne@ChineseStandard.net INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA JG JG/T

More information

T.Y.C. BROTHER IND. CO., LTD.

T.Y.C. BROTHER IND. CO., LTD. 堤維西交通工業股份有限公司 T.Y.C. BROTHER IND. CO., LTD. TEL:+886-6-2658781 ext. 413 FAX:+886-6-2912800 APPLICATION FOR APPROVAL OF A TYPE OF FRONT FOG LAMP ACCORDING TO ECE REGULATION NO. 19-02 SERIES OF AMENDMENTS

More information