History of PKN. History of PKN
|
|
- Nora Gibson
- 6 years ago
- Views:
Transcription
1 History of PKN History of PKN 1923 On the initiative of ing. Piotr Drzewiecki Technical Committee for Standardization of Industrial Products and Their Delivery is being established at the Ministry of Trade and Industry (Pursuant to Regulation of Council of Ministers of ) Polish National Electrotechnical Committee (established as part of Association of Polish Electrical Engineers SEP) on the initiative of prof. Mieczyslaw Pozaryski becomes member of IEC On the basis of a resolution adopted at the meeting of the Technical Committee for Standardization of Industrial Products and Their Delivery, Polish Committee for Standardization (P.K.N.) is being established and Polish Standard (PN)is being introduced as an official document for voluntary use formally confirmed in the Official Journal of Poland Polish Monitor of 1926) First PN published P.K.N. started issuing its own publication News of P.K.N Standardization work is being secretly resumed under the guidance of ing. Czeslaw Szczekowski standardization committees begin to operate and standards are being secretly sold and distributed among schools and individuals engaged in research Polish Committee for Standardization (PKN) reinstated after the war. 1
2 1947 PKN becomes the charter member of ISO The Act on Polish Committee for Standardization introduces standards as documents for mandatory use At the request of the General Board of SEP, Polish National Electrotechnical Committeeis being included in the PKN PKN becomes the central state administration body responsible for standardization Act on Standardization confirms PKN status as a central state administration body Co-operation between UN/ECE and PKN has been initiated Pursuant to Act of PKN and Central Office of Measures merge together into the Polish Committee for Standardization and Measures (PKNiM) Pursuant to Act on Quality of Products and Services of Polish Committee for Standardization, Measures and Quality Control (PKNMiJ)is being established PKNMiJ becomes an Affiliate of CEN and CENELEC First two PN-EN approved. 2
3 Pursuant to Act on Standardization of , PKNMiJ is dissolved and PKN (Polish Committee for Standardization) reinstated. The law introduces the voluntary system of standardization in Poland in accordance with the European practice. Polish standards acquire the status of documents for voluntary use. PKN becomes ETSI/NSO as a result of a signed Memorandum of Understanding with ETSI PKN introduces voluntary Mark of Conformity with Polish Standards National enquiry point of WTO/TBT is being established at PKN Office Polish Standards database is being included in the PERINORM system th anniversary of the Polish Committee for Standardization Act of on amending the Act on Standardization of allowed the adoption of European and international standards in the original language, hence creating the possibility for PKN membership in CEN and CENELEC Act on Standardization of adopted PKN applies for full membership in CEN and CENELEC. 3
4 2002 PKN started selling standards in electronic form New Act on Standardization in force - new status of PKN - standardization system fully compatible with the European one PKN becomes a Member of CEN and CENELEC on 1 st of January th anniversary of the Polish Committee for Standardization PKN is granted the Certificate of Quality Management System affirming its conformity with the requirements of PN-EN ISO: PKN launched an online store PKN is granted the status of a mandated body in European Commission PKN introduced a fully electronic process into the development of Polish Standards and into the work of Technical Committees th of May named the Day of Polish Standardization. PKN introduced changes into the management of standardization work a sectoral approach is being implemented and new bodies are being established Sector Councils and Project Committees. PKN introduced educational policy towards institutions of higher education. 4
5 PKN introduced new electronic products: e-access and Standards Management Systems. PKN is granted the Certificate of Information Security Management Systems affirming its conformity with the requirements of PN-EN ISO/IEC PKN introduced a System of Digital Sales of Products and Services and a System for Management of Standardization Processes (PZN) Full conversion of current Polish Standards into XML format The first meeting of CEN/TC 419 took place on the premises of PKN the first technical committee of CEN with secretariat allocated to Poland. 5
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations Gonçalo Ascensão 16 October 2014 ECO Platform EPD European Standardization Organizations (ESOs)
More informationCEN strategies and plans for a global acceptance of the Eurocodes
CEN strategies and plans for a global acceptance of the Eurocodes Gonçalo Ascensão 5th December 2013 Adoption of the Eurocodes in the Balkan Region European Standardization System Links to legislation
More informationConfused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
More informationcooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012
Perspectives and benefits of international cooperation in standardization Gonçalo Ascensão ç Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012 CEN & CENELEC systems Links to legislation
More informationBSI the UK voice into European and national standards
BSI the UK voice into European and national standards Jessy Mathew Programme Manager Sustainability Sector BSI Copyright 2018 BSI. All rights reserved 1 Contents What are standards? About BSI Standards
More informationThe Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
More informationThe European Standardization System. Diana Dus Programme Manager International Cooperation
The European Standardization System Diana Dus Programme Manager International Cooperation The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European
More informationStandards and Standardisation. An Overview
Standards and Standardisation An Overview Therese Clarke Standards Development 1 NSAI Technical Committee 58/SCI Published - I.S. 398-1:2013 Reactive pyrite in sub-floor hardcore material Part 1 Testing
More informationEU Best practice of Technical Committees and benefits that could be achieved
EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,
More informationFAQs Radio Equipment Directive (RE-D)
FAQs Radio Equipment Directive (RE-D) What is the objective of the RE-D? The Radio Equipment Directive (2014/53/EU) was adopted in 2014 and Member States had to transpose it into their national law before
More informationREDCA update on the RED. Days to go. 17 May 2017
REDCA update on the RED Days to go 17 May 2017 Replaces Radio & Telecommunication Terminal Equipment Directive (RTTED) 1999/5/EC, repealed with effect from 13 June 2016 RED applied from 13 June 2016 (+
More informationAbout European Standards
About European Standards Aquaculture workshop Brussels, Centre Borschette 2017-04-27 Andrea NAM 1 Actors in standardization The European Standardization Organizations (ESOs) The Regional Standardization
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 054/02)
12.2.2016 EN Official Journal of the European Union C 54/9 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council
More informationTechnical standards to support the evolution of technology enabled care services
Technical standards to support the evolution of technology enabled care services Agenda Technical Special Interest Group Signalling across next generation networks and liaison with Ofcom/NICC Technical
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/02)
C 209/12 EN Official Journal of the European Union 15.6.2018 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council,
More informationUsing consumer appliances in Europe the consumer view
Using consumer appliances in Europe the consumer view February 2011 European Association for the Co-ordination of Consumer Representation in Standardisation Av. de Tervueren 32, box 27 B-1040 Brussels,
More informationOverview of standardization and mandatory technical regulation systems of Turkmenistan. (gas and electricity)
Annex 9 verview of standardization and mandatory technical regulation systems of Turkmenistan (gas and electricity) Prepared by: Reviewed by: Quality Assured by: Leonid Malov Viktor Petrenko Volodymyr
More informationPACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code
STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL
More informationRoad Map and Action Plan for Azerbaijan on harmonisation of standards and codes in electricity and gas sectors
Road Map and Action Plan for Azerbaijan on harmonisation of standards and codes in electricity and gas sectors INOGATE Technical Secretariat and Integrated Programme in Support of the Baku Initiative and
More informationCEN/TC 186 ISO/TC 244
SAFETY & STANDARDS Industrial Thermoprocessing Equipment (IThE) CEN/TC 186 ISO/TC 244 IEC/TC 27 Standardisation for IThE in Europe Basis of European Standardization on Machinery and Thermoprocessing Equipment
More informationRoad Map and Action Plan for Republic of Uzbekistan on harmonisation of standards and codes in electricity and gas sectors
Road Map and Action Plan for Republic of Uzbekistan on harmonisation of standards and codes in electricity and gas sectors INOGATE Technical Secretariat and Integrated Programme in Support of the Baku
More informationCYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus
CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus December 8 th, 2015 CLEOPATRA HOTEL Nicosia Cyprus Prepared by Michalis Zantis (CYS) Purpose of this Workshop
More informationCONFORMITY ASSESSMENT - SUPPLIER'S
STANDARD I.S. EN ISO/IEC 17050-2:2004 ICS 03.120.20 National Standards Authority of Ireland Dublin 9 Ireland CONFORMITY ASSESSMENT - SUPPLIER'S Tel: (01) 807 3800 Fax: (01) 807 3838 DECLARATION OF CONFORMITY
More informationBUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the
More informationBiological evaluation of medical devices
BRITISH STANDARD Biological evaluation of medical devices Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) ICS 11.100.20 NO COPYING WITHOUT BSI PERMISSION
More informationStandardization through the European Committee for Standardization. Thomas Fischer SUB Göttingen
Standardization through the European Committee for Standardization Thomas Fischer SUB Topics What is CEN? How does CEN work? Examples of recent activities What does this mean for CASHMERE-Int? 2 What is
More informationOverview of standardization and mandatory technical regulation systems of Belarus. (gas and electricity)
Annex 3 verview of standardization and mandatory technical regulation systems of Belarus (gas and electricity) Prepared by: Reviewed by: Quality Assured by: Leonid Malov Viktor Petrenko Volodymyr Yakubov
More informationRubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
BRITISH STANDARD BS EN ISO 1307:2008 Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses ICS 23.040.70 National foreword This British Standard
More informationILNAS-EN ISO :2017
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich
More informationCEN TC 10 (Lifts, escalators and moving walks) Introduction to EN 81-20/50 (revision of EN 81-1/2)
Introduction to EN 81-20/50 (revision of EN 81-1/2) CEN/TC 10: August 6 th, 2014 CEN/TC 10 Work Program CEN/TC 10 Structure European Standardization for Lifts, Escalators and Moving Walks 3 CEN/TC 10 Work
More informationCEN and CENELEC Organisational description & functions International and regional activities
CEN and CENELEC Organisational description & functions International and regional activities Eric Marchand Programme Manager International Cooperation, CEN-CENELEC Management centre Overview CEN and CENELEC
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 26.1.2017 C(2017) 315 final COMMISSION DELEGATED REGULATION (EU) /... of 26.1.2017 on the classification of frost resistance performance for clay tiles under EN 1304 pursuant
More informationBUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
More informationStandardization of diagnostic methods. Patrizia Rossi
Standardization of diagnostic methods Patrizia Rossi Istituto Superiore di Sanità, Rome, Italy What is a standard? International Standards provide a reference framework, or a common technological language,
More informationPersonal protective equipment - Safety footwear (ISO 20345:2011)
Irish Standard Personal protective equipment - Safety footwear (ISO 20345:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification
More informationStandardization. Introduction to standardization for Aalto University Jukka Alve
Introduction to standardization for Aalto University 2018-02-01 Jukka Alve 2 Overview in General What is standardization? What is a standard? Principles of standardization Motivation for making a standard
More informationGI Standardization Overview
Second workshop on the use of GIS/OGC standards in meteorology GI Standardization Overview 1 nicolas.lesage@ign.fr 12 Janvier 2009 Modèle TN-02.018-1.1 The goal of standardization According to decree number
More informationCOMMISSION DELEGATED REGULATION (EU) /... of XXX. on the classification of the frost resistance performance for clay tiles under EN 1304
EUROPEAN COMMISSION Brussels, XXX [ ](2015) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX on the classification of the frost resistance performance for clay tiles under EN 1304 (Text with
More informationSýnishorn Maintenance - Qualification of maintenance personnel
ÍST EN 15628:2014 Gildistaka 20.11.2014 ICS: 3.08 Maintenance - Qualification of maintenance personnel Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun háð leyfi útgefanda EUROPEAN STANDARD
More informationStandardization, conformity attestation and accreditation in the Republic of Belarus. Valery N. Koreshkov, Chairman of Gosstandart
Standardization, conformity attestation and accreditation in the Republic of Belarus Valery N. Koreshkov, Chairman of Gosstandart Development of standardization in the Republic of Belarus is based on:
More informationBusiness Plan CEN/TC 172 PULP, PAPER AND BOARD
Page: 1 Business Plan CEN/TC 172 PULP, PAPER AND BOARD Introduction CEN Technical Committees and Business Planning The extension of formal business planning to CEN Technical Committees (CEN/TCs) is an
More informationBSI the UK National Standards Body: The Role of Standards
BSI the UK National Standards Body: The Role of Standards Anthony Burd - Head of Sector - Construction Copyright 2012 BSI. All rights reserved. This Session The BSI Group and the role of standards British
More informationContents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
More informationILNAS-EN ISO 23640:2015
In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) In-vitro-Diagnostika - Haltbarkeitsprüfung von Reagenzien für invitro-diagnostische Untersuchungen
More informationCOMMISSION DELEGATED REGULATION (EU) /... of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2018) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX supplementing Regulation (EU) No 305/2011 of the European Parliament and of the Council by establishing
More informationPaper and board - Determination of grammage (ISO 536:2012)
Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard
More informationBUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
More informationCOMMISSION DELEGATED REGULATION (EU) /... of XXX
Ref. Ares(2017)4156968-24/08/2017 EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX establishing common safety methods on safety management system requirements
More informationWhen Standards meet experience and increase the value of PV. Dr. Francesco Groppi (CESI Middle East) Chairman of CENELEC/TC82
When Standards meet experience and increase the value of PV (CESI Middle East) Chairman of CENELEC/TC82 About CENELEC CENELEC is the European Committee for Electrotechnical Standardization and is responsible
More informationOn , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).
BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity
More informationHexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationWhat is ACEC? FR-PM-1-1
INTERNATIONAL ELECTROTECHNICAL COMMISSION What is ACEC? FR-PM-1-1 Dr. William Radasky, Past Chairman ACEC IEEE EMC Symposium Long Beach, California, August 2018 Copyright IEC, Geneva, Switzerland 2 Introduction
More informationThe New Generationn of Firedoors
The New Generationn of Firedoors Product Standard EN 16034 Introduction A modern company, while operating in mature sectors, is actually part of an ncreasingly technocratic world, influenced by technical,
More informationEuropean Standards: Supporting the European Single Market for Services
2015 ANSI Conference: Standards and the Service Economy European Standards: Supporting the European Single Market for Services Presented by Ashok Ganesh Director Innovation, CEN and CENELEC September 29,
More informationRelevance of standards for tractors and agricultural machinery. Antoon Vermeulen, CNH Belgium N.V. June pages
Relevance of standards for tractors and agricultural machinery Antoon Vermeulen, CNH Belgium NV June 2012 12 pages Standards in the legislation of the EU New Approach legislation in the European Union
More informationBUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS
Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,
More informationEnglish Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17052 January 2017 ICS 91.080.10 English Version Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18750 May 2015 ICS 35.240.60; 03.220.20 English Version Intelligent transport systems - Cooperative systems - Definition
More informationNOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
Official Journal of the European Union C 181 English edition Information and Notices Volume 57 13 June 2014 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES European
More informationRoad Map and Action Plan for Ukraine on harmonisation of standards and codes in electricity and gas sectors
Road Map and Action Plan for Ukraine on harmonisation of standards and codes in electricity and gas sectors INOGATE Technical Secretariat and Integrated Programme in Support of the Baku Initiative and
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 21171:2006 Medical gloves - Determination of removable surface powder Medical gloves - Determination of removable surface powder EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationDECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -
More informationSýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails
ÍST EN ISO 14122-3:2016 Gildistaka 20.11.2016 ICS: 13.11 Öryggi véla - Varanlegar aðgönguleiðir að vélum - Hluti 3: Stigar, klifurstigar og handrið Safety of machinery - Permanent means of access to machinesry
More informationSafety standards relevant to Refrigeration, Air-Conditioning and Heat Pump equipment
Briefing note 1 Safety standards relevant to Refrigeration, Air-Conditioning and Heat Pump equipment MAY 2017 1 1. Introduction This briefing note has been prepared by the Ozone Secretariat as background
More information1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?
QUESTIONS TO REGULATORS 1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres? Note: This answer only relates to coal mining in the state of New South
More informationGuidance Note. Visual Alarm Devices: Conflict between BS 5839 and EN 54-23
Guidance Note Visual Alarm Devices: Conflict between BS 5839 and EN 54-23 Visual Alarm Devices: Conflict between BS 5839 and EN 54-23 INTRODUCTION... 3 EXTENSION OF THE COEXISTENCE PERIOD FOR EN 54-23...
More informationResilient, textile and laminate floor coverings - Classification (ISO 10874:2009)
Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.
More informationBIOLOGICAL EVALUATION OF MEDICAL
IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353
More informationGlass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)
Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 687rev1 2015-06-02 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 I - Drafting
More informationBUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES Business Environment EXECUTIVE SUMMARY The market scenario is the domestic one and product typology concerned is very wide. The products within the
More informationThe standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar
The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar Petrenko V.E., D. Eng. Sc. Development of Standardisation Technical Committees in
More informationCompilation of regulatory approaches used in various countries. Information received by the Secretariat through a survey in 2009
Compilation of regulatory approaches used in various countries Information received by the Secretariat through a survey in 2009 At its seventeenth session, the Working Party mandated the Sectoral Initiative
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 8.3.2018 C(2018) 1392 final COMMISSION DELEGATED REGULATION (EU) /... of 8.3.2018 establishing common safety methods on safety management system requirements pursuant to Directive
More informationNon-destructive testing of welds Magnetic particle testing of welds Acceptance levels (ISO 23278:2006)
BRITISH STANDARD BS EN ISO 23278:2009 Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels (ISO 23278:2006) ICS 25.160.40 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED
More informationSýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment
ÍST EN 1865-1:2010+A1:2015 Gildistaka 15.11.2015 ICS: 11.16 Forskriftir fyrir sjúkraflutningabúnað til nota í sjúkrabifreiðum - Hluti 1: Almenn sjúkrabörukerfi og sjúkraflutningabúnaður Specifications
More informationProposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL. on appliances burning gaseous fuels. (Text with EEA relevance)
EUROPEAN COMMISSION Brussels, 12.5.2014 COM(2014) 258 final 2014/0136 (COD) Proposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on appliances burning gaseous fuels (Text with EEA relevance)
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This
More informationBUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY Scope CEN/TC 250 covers the standardization of structural and geotechnical design rules for building and civil engineering works
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9311-3 First edition 2005-03-01 Adhesives for thermoplastic piping systems Part 3: Test method for the determination of resistance to internal pressure Adhésifs pour systèmes
More informationHexagon nuts Ð Product grade C
BRITISH STANDARD BS EN ISO 4034:2001 The European Standard EN ISO 4034:2000 has the status of a British Standard ICS 21.060.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Hexagon
More informationPlastic containers for intravenous injections (ISO 15747:2010)
Irish Standard Plastic containers for intravenous injections (ISO 15747:2010) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification
More informationILNAS-EN ISO 2692:2006
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische
More informationCosmetics - Good Manufacturing Practices (GMP) - Guidelines on Good Manufacturing Practices (ISO 22716:2007, Corrected version )
Irish Standard I.S. EN ISO 22716:2007 Cosmetics - Good Manufacturing Practices (GMP) - Guidelines on Good Manufacturing Practices (ISO 22716:2007, Corrected version 2008-05-15) CEN 2007 No copying without
More informationBUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
More informationMedical gloves for single use - Part 2: Requirements and testing for physical properties
Irish Standard I.S. EN 455-2:2015 Medical gloves for single use - Part 2: Requirements and testing for physical properties CEN 2015 No copying without NSAI permission except as permitted by copyright law.
More informationCamping tents (ISO 5912:2011)
Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based
More informationEUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE
TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING
More informationSýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts
ÍST EN 1366-1:2014 Gildistaka 1.2.2015 ICS: 13.22 Eldþolsprófanir fyrir þjónustustöðvar - Hluti 1: Loftræstistokkar Fire resistance test for service installations - Part 1: Ventilation ducts Staðfestur
More informationBUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
More informationResource efficiency and Circular Economy in the EU and Japan Overview of the EU Ecodesign and Energy Labelling schemes. Tokyo, 15 February 2016
Resource efficiency and Circular Economy in the EU and Japan Overview of the EU Ecodesign and Energy Labelling schemes Tokyo, 15 February 2016 Policy context Europe 2020 Strategy: objectives on employment,
More informationRoad vehicles Mopeds Symbols for controls, indicators and tell-tales
BSI Standards Publication Road vehicles Mopeds Symbols for controls, indicators and tell-tales NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide BRITISH
More informationAnimal and vegetable fats and oils - Sampling (ISO 5555:2001)
Irish Standard I.S. EN ISO 5555:2001&A1:2014 Animal and vegetable fats and oils - Sampling (ISO 5555:2001) CEN 2014 No copying without NSAI permission except as permitted by copyright law. I.S. EN ISO
More informationEnergy management systems - Requirements with guidance for use (ISO 50001:2011)
Irish Standard I.S. EN ISO 50001:2011 Energy management systems - Requirements with guidance for use (ISO 50001:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law.
More informationGLOBAL GLOBAL OUTREACH OUTREACH REPORT 2016 REPORT Q4 2017
GLOBAL GLOBAL OUTREACH OUTREACH REPORT 2016 REPORT Q4 2017 Contents 1. Foreword... 1 2. Alignment of European and ISO/IEC deliverables... 2 2.1. Level of alignment between CEN and ISO deliverables... 2
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12899-2:2007 Vertikaalsed püsiliikluskorraldusvahendid. Osa 2: Seest valgustatavad piirdetulbad Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
More informationC 183/10 Official Journal of the European Union
C 183/10 Official Journal of the European Union 7.7.2010 Commission communication in the framework of the implementation of the Council Directive 90/385/EEC of 20 June 1990 on the approximation of the
More informationISO 7439 INTERNATIONAL STANDARD. Copper-bearing intra-uterine contraceptive devices Requirements, tests
INTERNATIONAL STANDARD ISO 7439 Second edition 2002-03-15 Copper-bearing intra-uterine contraceptive devices Requirements, tests Dispositifs intra-utérins contenant du cuivre Spécifications, essais Reference
More informationILNAS-EN 50304:2001. Electric ovens for household use - Methods for measuring the energy consumption
ILNAS-EN 50304:2001 Electric ovens for household use - Methods for measuring the energy consumption Elektrische Backöfen für den Hausgebrauch - Verfahren zur Messung des Energieverbrauchs Fours électriques
More information