FirePro CERTIFICATES, APPROVALS & TEST REPORTS. Underwriters Laboratories of USA, UL Listing Certificate No EX6960, 02/08/11.
|
|
- Damian Scott
- 6 years ago
- Views:
Transcription
1 FirePro Systems Limited 6 Koumandarias & Spyrou Araouzou Street Tonia Court No.2, 6 th Floor, CY-3036 Limassol P. O. Box 54080, CY-3720 Limassol, CYPRUS Tel: , Fax: Web: mail@firepro.info An ISO 9001:2008 & 14001:2004 registered company FirePro Manufacturer & Worldwide Supplier of Fire Extinguishing Aerosol Systems FirePro CERTIFICATES, APPROVALS & TEST REPORTS Product Certifications Listing Certifications Underwriters Laboratories of USA, UL Listing Certificate No EX6960, 02/08/11. BSI Kitemark (UKAS Product Certification) Licence No. KM , dated 21 September ActiveFire Listing Certificate (Australia, New Zealand), Listing No. afp-2286 dated 13 February KIWA - Product Certificate no. K21477/11, dated 1 August EPA SNAP listing of Substitutes Powered Aerosol E (FirePro [supreg]). September Underwriters Laboratories of Canada, Listing Certificate No. EX6960 dated June ANPI - Belgium Accredited Institute, ANPICERT, Certificate of Conformity, January PCBC, The Product Certification Body, ( Poland). Scientific and Research Center for Fire Protection, Certificate of Approval 306/2000, Fire Protection Test Laboratory, Budapest, Hungary. Fire Protection Conformity Certification Number: 50/47/1999, 27 July 1999.
2 Marine Type Approvals BSI EC TYPE-Examination (MODULE B) Type Approval Certificate No. BSI/A.1/3.46/560436, EC Quality System (MODULE D) Certificate No. BSI/MED/PC/ dated 28 August 2010 (WHEELMARK), in compliance with MED 96/98/EC and MED 2009/26/EC. Russian Maritime Register of Shipping, Type Approval Certificate, No , 11 June RINA, Registry of Italian Navy, Italy, Approval Certificate N.DIP/059/98, April ECB European Certification Bureau Netherlands, No. K21774/01, dated July ECB - Final Inspection Report, Ref. CFG-0593, dated 13/07/2001. Danish Maritime Authority, Type of Approval certificate, September Danish Maritime Authority Type Approval Certificate 1999/25855 dated Swedish Maritime Safety Inspectorate, Cert. No , dated The Netherlands Shipping Inspectorate, Cert. No. IV-D5/ , dated Norwegian Maritime Directorate, Cert. No /556, dated Certificate of Inspection and Tests issued by the UK Maritime and Coastguard Agency (MCA), Ref.: MS 22/3/910 dated 22 nd November Croatian Register of Shipping, Type Approval Certificate No /013911, dated 18 th April The Netherlands Shipping Inspectorate, Cert. No. IVW-06JU000524, dated , protection of machinery spaces up to 500 m 3 net content. The Netherlands Inspector-General Transport and Water management Inspectorate, dated , protection of machinery spaces up to 500 m 3 net content. The Icelandic Maritime Administration, Cert. No , dated RINA, Registry of Italian Navy, Italy, Approval Certificate FPE362207CS, January Cyprus Department of Merchant Shipping Type Approval, Ref - Ministry of Communications and Works, No. TEN: /
3 Environmental Certifications Regulation (EC) No. 1980/2000, Eco Label Award Scheme. EPA SNAP listing of Substitutes Powered Aerosol E (FirePro [supreg]). September Health and Safety Reports KEMA Holland, Toxicological Report dated September Certificate of the National Institute of Hygiene, (Poland), NR. PZH/HT-0571/99, ISO Certifications Management and Production ISO 9001:2008 Certificate, No AQ-NLD-RvA, dated 22 December ISO 14001:2004 Certificate, No AE-NLD-RvA, dated 22 December Licenses & Approvals from Government Authorities, Ministries, Fire Brigades, & Others Ministry of Interior, General Directorate of Civil Protection and Fire Fighting Services, Italy. Test Report / Approval N. 018/4101, February 1, The Ministry of Justice and Public Orders, Chief Fires offices Fire Department, Cyprus. Approval, N. 343, May The Standards Institution of Greece. Approval N , June Ministry of the Industrial Affairs, General Inspectorate of the Military Fire Squad, (Romania). Approval Certificate No , 30/08/1999. South African Bureau of Standards, South Africa, Ref 19/3/21/5 of 22/06/10. City Council of Pretoria, South Africa, Community Safety Department, Fire Brigade, and Ambulance Services, Letter of Approval.
4 Ministry of Interior and Public Orders, Commission of Fire Brigades, Greece, Approval N F.701.6, July Civil Defense Approval, United Arab Emirates. Civil Defense Approval, Sultanate of Oman. Fire and Rescue Department (BOMBA), Malaysia, Approval No. JPBM:PPP/005/44/31 dated March Egyptian Ministry of Interior, Civil Defense Authority, Approval Letter dated 10 th June Sri Lanka Colombo Municipal Council, Fire Service Department, January Ministry of Internal Affairs, National Directorate General for Disaster Management. (Hungary) Cert. No: /2010, Issued on: , Valid: Test Reports Electronic Applications National Aerospace Laboratory (NLR), Test Report on Corrosion on Electronics Instrumentation dated 15 April 2008, ref. No. ASMO/709/3318. TNO Report 2005-CVB-R0192 dated June 2005, No impact on Working Computer Equipment after 15 months from the test. ABB Austria, Test Report, No impact on computer equipment, dated August Test Reports Extinguishing Performance Assessments CESI, Italian Electrotechnical Center of Experiments, Italy, Test Report N.BC-97/038104, January LPC - Loss Prevention Council, London, UK, Performance assessment Test Certificate, 19 November South African Bureau of Standards, South Africa, Test Report No. 5409/83454/99, 4th August Test Certificate No. RE02113, dated 21/08/2002, Danish Institute of Fire and Security Technology. TNO, Netherlands Organization for Applied Scientific Research. Certificate 2003-CUB- R0098(e), April Hughes Associates Europe (KIWA Peer Review), Test Report as per UL2127, 34.2 Class A fire extinguishing tests, Polymeric material, dated 30/10/2003.
5 Hughes Associates Europe (KIWA Peer Review 1-2), Test Report as per UL2127, 34.2 Class A fire extinguishing tests, Polymeric material modified, (IKEA Wood composite materials) dated Hughes Associates Europe (KIWA Peer Review), Test Report as per UL2127, 34.2 Class A fire extinguishing tests, Wood Crib, dated TNO Report CVB-B0573/RNP/TNL dated June , IMO/MSC1007. TNO Report CVB-R0214 dated July 2004, CEN-BRL-UL2127 Norms. ANPI - Belgium Accredited Institute, Test Report No. BFS/ME/027 and Addendum No.1 test on running fuel-oil, dated 3 December ANPI Belgium Accredited Institute, Test Certificate No. BFS/ME/028 on Class F Fire (Industrial deep fryer), dated 14 January Assessment Reports Fire Risk Assessment Authorities Hughes Associates Inc. Baltimore USA, Due diligence audit Report on Certifications Record, dated November 2004.
EC Type Examination Certificate
EC Examination Certificate No. BSI/A./3.46/56436 This is to certify that: FirePro Systems Ltd 6 Koumandarias Street & Spyrou Araouzou Tonia Court No.2 Limassol 336 Cyprus Holds Certificate Number: BSI/A./3.46/56436
More informationIdentify RISKS. Design SOLUTIONS. Prevent DISASTERS
We at FirePro Systems aim to Identify RISKS Design SOLUTIONS Prevent DISASTERS As Presenter I aim to arouse: INTEREST AWARENESS CONCERN You decide what is BEST for you HISTORY OF AEROSOL - Solid Potassium
More informationfixed dry aerosol fire extinguishing components FirePro Systems Ltd.
product certificate Issued 2013-01-11 Valid untill 2013-11-19 Replaces K21477/11 Page 1 of 22 FirePro fixed dry aerosol fire extinguishing components STATEMENT BY KIWA With this product certificate, issued
More informationFirePro ANNEX 1 MARINE MANUAL. Version 1,
Marine Design Guide ANNEX 1 MARINE MANUAL To be read and used in conjunction with FirePro Information, Instruction & User Manual Version 4, 01-05-2010 FirePro Systems Ltd 6 Koumandarias & Spyrou Araouzou
More informationConsumer Protection: Standardized International Product Labels: 2. Scope of Labelling
Austria 1883 OVE was founded in Austria. Austrian market. Belgium CEBEC was founded in 1923. The CEBEC mark is particularly asked for by Belgian consumers. France AFNOR is a private, state-approved association
More informationInternational Product Compliance and Certifications. Product Safety Consulting, Inc.
International Product Compliance and Certifications - USA - Canada - Europe - Other International - CB Scheme Agenda This was the only mark. Now, these are the marks A bit of history.. UL founded in 1894
More informationWelcome to Argonite fire protection from Ginge-Kerr
Welcome to Argonite fire protection from Ginge-Kerr Looking for fire protection of high value areas? Then you've come to the right place. As Halon systems go out, the Argonite system is coming in. All
More informationCertificate of constancy of performance,
Certificate of constancy of performance, 0832-CPR-F0520 In compliance with Regulation 305/2011/EU of the European Parliament and of the council of 9 th March 2011 (the Construction Products Regulation
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Location Certification Scheme Edisonstraat 12A 6902 PK Zevenaar The Netherlands
More informationCONFORMITY ASSESSMENT - SUPPLIER'S
STANDARD I.S. EN ISO/IEC 17050-2:2004 ICS 03.120.20 National Standards Authority of Ireland Dublin 9 Ireland CONFORMITY ASSESSMENT - SUPPLIER'S Tel: (01) 807 3800 Fax: (01) 807 3838 DECLARATION OF CONFORMITY
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1187 January 2012 ICS 13.220.50; 91.060.20 Supersedes ENV 1187:2002 English Version Test methods for external fire exposure
More informationEurocode 9 Design of aluminium structures
BRITISH STANDARD Eurocode 9 Design of aluminium structures BS EN 1999-1-2:2007 Incorporating corrigenda December 2008, March 2009 and October 2009 Part 1-2: Structural fire design ICS 91.010.30; 91.080.10;
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 January 2013 ICS 23.040.01; 91.140.40 Supersedes CEN/TS 1555-7:2003 English Version Plastics piping systems for the
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Activities trading under the names and Kiwa Telefication Fire alarm/detection
More informationBUS ENGINE COMPARTMENT FIRE PROTECTION SYSTEM FIREPRO TEST REPORT PEER REVIEW
& e. INDUSTRIAL LOSS CONTROL & eng Analisi e Controllo dei Rischi Industriali HUGHES ASSOCIATES EUROPE, srl FIRE SCIENCE & ENGINEERING BUS ENGINE COMPARTMENT FIRE PROTECTION SYSTEM FIREPRO TEST REPORT
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34367-5 Edition 1 (incorporating EN amdt 1, EN corr. 1) EN 1492-1:2000 Edition 1 (incorporating amdt 1, corr. 1) SOUTH AFRICAN NATIONAL STANDARD Textile slings Safety Part 1: Flat woven
More informationRubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
BRITISH STANDARD BS EN ISO 1307:2008 Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses ICS 23.040.70 National foreword This British Standard
More informationExtinguishing agents additional information. Transmitted by the Governments of Belgium and the Netherlands
Economic Commission for Europe Inland Transport Committee Working Party on the Transport of Dangerous Goods Joint Meeting of Experts on the Regulations annexed to the European Agreement concerning the
More informationApprovals, Tests and Certificates
of AEROSOL FIRE EXTINGUISHERS manufactured by Dynamit Nobel Defence Authority / Institute, Approval / Test / Certificate GERMANY Landesfeuerwehrschule Nordrhein-Westfalen Amtliche Prüfstelle für Feuerlöschmittel
More informationISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints
INTERNATIONAL STANDARD ISO 15236-4 First edition 2004-06-15 Steel cord conveyor belts Part 4: Vulcanized belt joints Courroies transporteuses à câbles d'acier Partie 4: Jonctions vulcanisées des courroies
More informationISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties
INTERNATIONAL STANDARD ISO 9311-1 First edition 2005-08-15 Adhesives for thermoplastic piping systems Part 1: Determination of film properties Adhésifs pour réseaux de tuyauteries en matières thermoplastiques
More informationInternational standards used locally worldwide ISO/TC 67
/ International standards used locally worldwide ISO/TC 67 International standardization for materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Cecilie
More informationSterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO (ISO :2009)
Standard Recommendation S.R. CEN ISO/TS 17665-2:2009 Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO 17665-2:2009) NSAI 2009 No copying without
More informationResilient, textile and laminate floor coverings - Classification (ISO 10874:2009)
Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.
More informationQuality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations
Irish Standard I.S. EN 9101:2011 Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations NSAI 2011 No copying without NSAI permission except as permitted by copyright
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Accredited to ISO17065:2012 to provide product conformity Octagon House Concorde Way Segensworth North Fareham Hampshire PO15 5RL Contact: Mr Mark Jenkins Tel: +44 (0) 1489 558258 Fax: +44 (0)1489 558101
More informationCleanSeaNet First Generation. 16 April January 2011
CleanSeaNet First Generation 16 April 2007-31 January 2011 Cover photo credits: European Space Agency (http://www.esa.int) All maps and tables generated by EMSA based on CleanSeaNet data CleanSeaNet First
More informationBIOLOGICAL EVALUATION OF MEDICAL
IRISH STANDARD I.S. EN ISO 10933-12:2007 ICS 11.100.20 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353
More informationILNAS-EN ISO 2692:2006
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische
More informationDECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 15102:2007 ICS 91.180 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie DECORATIVE WALLCOVERINGS -
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 15749-4:2004 Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes Ships and marine technology - Drainage
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Accredited to ISO17065:2012 to provide product conformity Octagon House Concorde Way Segensworth North Fareham Hampshire PO15 5RL Contact: Mr Mark Jenkins Tel: +44 (0) 1489 558258 Fax: +44 (0)1489 558101
More informationEC TYPE-EXAMINATION (MODULE B) CERTIFICATE No. BSI/A.1/3.46/560436
EC TYPE-EXAMINATION (MODULE B) CERTIFICATE No. BSI/A./3.46/560436 This is to certify that BSI did undertake the relevant type approval procedures for the equipment identified below which was found to be
More informationISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods
INTERNATIONAL STANDARD ISO 7458 Second edition 2004-03-01 Glass containers Internal pressure resistance Test methods Récipients en verre Résistance à la pression interne Méthodes d'essai Reference number
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide quality 4th Floor Vivo Building 30 Stamford Street SE1 9LQ United Kingdom Contact: Mr D P Koek
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK to provide product conformity Stocking Lane High Wycombe Buckinghamshire HP14 4ND Contact: Mr Alan Gower Tel: +44 (0)1494 569700 Fax: +44
More informationPISTON-OPERATED VOLUMETRIC
IRISH STANDARD I.S. EN ISO 8655-7:2005 ICS 17.060 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE ASSESSMENT OF National Standards Authority of Ireland Glasnevin, Dublin
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif
More informationEnglish version. Management Centre: Avenue Marnix 17, B Brussels
TECHNICAL REPORT CLC/TR 62061-1 RAPPORT TECHNIQUE TECHNISCHER BERICHT August 2010 ICS 13.110; 25.040.99; 29.020 English version Guidance on the application of ISO 13849-1 and IEC 62061 in the design of
More informationType Approvals GARAGE DOOR OPENER RADIO TRANSCEIVER. (EuroHomeLink 2000) Czech Republic CTU R 1194 Cyprus MCW129/95 12/2000 Denmark 98.
GARAGE DOOR OPENER RADIO TRANSCEIVER (EuroHomeLink 2000) Country Approval No. Austria GZ104569-ZB/98 Belgium RTT/D/X2064 Czech Republic CTU 2000 3 R 1194 Cyprus MCW129/95 12/2000 Denmark 98.3142-266 Finland
More informationDSPA DSPA B.V. Product Certificate K86591/07 UK. Non-Pressurized Condensed Aerosol Generators and Components K86591/06 UK
Product Certificate Issued 2018-07-11 Valid until 2019-07-10 Replaces Page 1 of 6 K86591/06 UK DSPA Non-Pressurized Condensed Aerosol Generators and Components STATEMENT BY KIWA With this product certificate,
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This
More informationISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion
INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 3746:2007 Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD EESTI STANDARDIKESKUS
More informationFire-fighting hoses - Non-percolating layflat hoses for fixed systems KONSOLIDEERITUD TEKST
EESTI STANDARD EVS-EN 14540:2004+A1:2007 Fire-fighting hoses - Non-percolating layflat hoses for fixed systems KONSOLIDEERITUD TEKST Fire-fighting hoses - Non-percolating layflat hoses for fixed systems
More informationISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General
INTERNATIONAL STANDARD ISO 9100-1 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 1: General Récipients en verre Bagues à crans pour bouchage sous vide Partie 1: Généralités Reference
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance
INTERNATIONAL STANDARD ISO 17707 First edition 2005-07-01 Footwear Test methods for outsoles Flex resistance Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la flexion Reference
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15693 April 2007 AGREEMENT ICS 27.010 English version Saving lifetimes of Energy Efficiency Improvement Measures in bottom-up calculations This CEN Workshop Agreement has been drafted
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 22475-3 December 2007 ICS 03.120.20; 03.100.30; 93.020 English Version Geotechnical investigation and testing - Sampling
More informationSANS 21-1:2009 Edition 1 EN 115-1:2008
ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 20127:2005 Dentistry - Powered toothbrushes - General requirements and test methods Dentistry - Powered toothbrushes - General requirements and test methods EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 9133:2005 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts Aerospace series - Quality management systems - Qualification procedure
More informationHigh vacuum guide FOR PRE-SEPARATORS AND CYCLONES
High vacuum guide FOR PRE-SEPARATORS AND CYCLONES High vacum guide for pre-separators and cyclones System description Nederman Pre-separation and Vacuum Transportation Systems pre-separate and discharge
More informationBiological evaluation of medical devices
BRITISH STANDARD Biological evaluation of medical devices Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) ICS 11.100.20 NO COPYING WITHOUT BSI PERMISSION
More informationMetallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
Irish Standard I.S. EN ISO 376:2011 Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011) NSAI 2011 No copying without NSAI
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 15374 August 2005 AGREEMENT ICS 37.100.01 English version Security Management System for suppliers to secure printing industry This CEN Workshop Agreement has been drafted and approved
More informationISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting
INTERNATIONAL STANDARD ISO 1806 Second edition 2002-12-01 Fishing nets Determination of mesh breaking force of netting Filets de pêche Détermination de la force de rupture de la maille de nappe de filet
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16677 May 2014 ICS 11.040.70 English Version Ophthalmic optics - Reference method for the testing of spectacle frames and
More informationHexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:
More informationEnglish Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 17052 January 2017 ICS 91.080.10 English Version Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium
More informationEnglish Version. Office furniture - Office work chair - Part 4: Clarifications to EN :2000 (Dimensions)
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 1335-4 October 2009 ICS 97.140 English Version Office furniture - Office work chair - Part 4: Clarifications to EN 1335-1:2000 (Dimensions)
More informationISO INTERNATIONAL STANDARD. Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method
INTERNATIONAL STANDARD ISO 16032 First edition 2004-09-15 Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method Acoustique Mesurage du niveau de pression
More informationILNAS-EN ISO :2005
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005) Matériaux métalliques - Essai de dureté Vickers - Partie 1: Méthode d'essai (ISO 6507-1:2005) Metallische Werkstoffe -
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 13445-102 May 2015 ICS 23.020.30 English Version Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket
More informationForeword. A completely revised report for quicker and easier access to key information
2017 Foreword A completely revised report for quicker and easier access to key information Following a completely revised edition in 2016, we introduce the 2017 DIY / Home Improvement Global Report. We
More informationPACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code
STANDARD I.S. EN 13430:2004 ICS 13.030.50 55.020 National Standards Authority of Ireland Dublin 9 Ireland PACKAGING - REQUIREMENTS FOR Tel: (01) 807 3800 Fax: (01) 807 3838 PACKAGING RECOVERABLE BY MATERIAL
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
More informationHEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code
IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800
More informationISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular
INTERNATIONAL STANDARD ISO 9100-12 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 12: 89 regular Récipients en verre Bagues à crans pour bouchage sous vide Partie 12: 89 regular Reference
More informationELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code
IRISH STANDARD I.S. EN 62382:2007 ICS 25.040.01 ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800
More informationHTA ACCREDITATIONS. NADCAP (Heat Treating) 2 AS 9100C 5-6 ISO NADCAP (Heat Treating) 3 AS 9100C 5-6 ISO NADCAP (Heat Treating) 4
HTA ACCREDITATIONS page HTA AEROSPACE & DEFENSE / HTA BRISBANE NADCAP (Heat Treating) 2 AS 9100C 5-6 ISO 9001 7-8 HTA AEROSPACE & DEFENSE / HTA MELBOURNE NADCAP (Heat Treating) 3 AS 9100C 5-6 HTA SYDNEY
More informationNational foreword. Text affected
PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of CEN/TR 16946-2:2016. The UK participation in its preparation was entrusted to Technical Committee RHE/16, requirements
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment Non-destructive testing - Ultrasonic testing
More informationREFRIGERATING SYSTEMS AND HEAT
IRISH STANDARD I.S. EN 378-2:2008 ICS 27.200 27.080 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie REFRIGERATING SYSTEMS
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1401-2 May 2012 ICS 23.040.01; 93.030 Supersedes ENV 1401-2:2000 English Version Plastics piping systems for non-pressure
More informationEN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)
ÖNORM EN ISO 14731 Edition: 2007-03-01 Welding coordination Tasks and responsibilities (ISO 14731:2006) Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) Coordination en soudage Tâches et responsabilités
More informationSVENSK STANDARD SS-EN :2006
SVENSK STANDARD SS-EN 3155-056:2006 Fastställd 2006-07-07 Utgåva 1 Aerospace series Electrical contacts used in elements of connection Part 056: Contacts, electrical, male, thermocouple NiCr, type C, crimp,
More informationMAIB SAFETY BULLETIN 2/2010. Failure of fixed high expansion foam system to extinguish fire on board the passenger ferry Oscar Wilde
MAIB SAFETY BULLETIN 2/2010 Failure of fixed high expansion foam system to extinguish fire on board the passenger ferry Oscar Wilde Marine Accident Investigation Branch Mountbatten House Grosvenor House
More informationForces @ work 2 Forces@work Forces@work The collection in brief Today s office environment is not only a place of work, it is also a place in which many of us spend most of our waking hours. In some aspects,
More informationPETROLEUM AND NATURAL GAS
IRISH STANDARD I.S. EN ISO 10432:2005 ICS 75.180.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - Tel: +353 1 807 3800
More informationKNX The worldwide STANDARD for home and building control. KNX Association International
KNX The worldwide STANDARD for home and building control KNX Association International KNX is the Standard CENELEC EN 50090 the only European Standard for Home and Building Electronic Systems (HBES) based
More informationISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 17892-6 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test Reconnaissance et
More informationEN ISO ÖNORM. Edition: (ISO 14937:2009)
ÖNORM EN ISO 14937 Edition: 2010-03-15 Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization
More informationKNX The worldwide STANDARD for home and building control. KNX Association International
KNX The worldwide STANDARD for home and building control KNX Association International KNX is the Standard CENELEC EN 50090 the only European Standard for Home and Building Electronic Systems (HBES) based
More informationCertificate of constancy of performance,
Certificate of constancy of performance, 0832-CPR-F0518 In compliance with Regulation 305/2011/EU of the European Parliament and of the council of 9 th March 2011 (the Construction Products Regulation
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CLC/TR 50670 December 2016 ICS 13.220.50; 27.160; 91.060.20 English Version External fire exposure to roofs in combination with photovoltaic (PV)
More informationGas meters - Conversion devices - Part 1: Volume conversion
EESTI STANDARD EVS-EN 12405-1:2005 Gas meters - Conversion devices - Part 1: Volume conversion Gas meters - Conversion devices - Part 1: Volume conversion EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13938-1 First edition 1999-08-01 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension Textiles Propriétés
More informationPersonal protective equipment - Safety footwear (ISO 20345:2011)
Irish Standard Personal protective equipment - Safety footwear (ISO 20345:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 17657-4:2007 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system Resistance welding - Welding current measurement for resistance
More informationPLASTICS - DETERMINATION OF THE MELT
IRISH STANDARD I.S. EN ISO 1133:2005 ICS 83.080.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT Tel: +353 1
More informationTheoretical Background
Theoretical Background National Annexes to EN 1999 All information in this document is subject to modification without prior notice. No part or this manual may be reproduced, stored in a database or retrieval
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide quality Cobra Court 1 Blackmore Road Stretford Manchester M32 0QY Contact: Mr S Stubley Tel:
More informationLABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code
IRISH STANDARD I.S. EN ISO 4788:2005 ICS 17.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie LABORATORY GLASSWARE - GRADUATED
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1565-2 May 2012 ICS 23.040.20; 91.140.80 Supersedes ENV 1565-2:2001 English Version Plastics piping systems for soil and
More informationSýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test
INTERNATIONAL STANDARD ISO 22476-3 First edition 2005-01-15 Geotechnical investigation and testing Field testing Part 3: Standard penetration test Reconnaissance et essais géotechniques Essais en place
More informationSýnishorn Health care services - Quality management systems - Requirements based on EN ISO 9001:2015
ÍST EN 15224:2016 Gildistaka 15.3.2017 ICS: 3.12 Health care services - Quality management systems - Requirements based on EN ISO 9001:2015 Staðfestur af Staðlaráði Íslands Staðlaráð Íslands - Eftirprentun
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 12101-4 December 2006 ICS 13.220.20; 23.120 English Version Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard
More information