Notifications over Directive 98/34/ЕС (January 2010)

Transcription

1 Sector/ Subsector 1 A01 Tourist services Notifications over Directive 98/34/ЕС (January 2010) National Standardization Body Document Title AENOR-Spain PNE Industrial tourism. Service provision requirements 2 PNE Golf courses. Services requirements 3 PNE Intermediation tourism services. Service requirements. 4 PNE Hostess and staff service reception and support organization 5 A99 BSI-United BS NHS Business continuity management. Part 1. Code of Practice 6 BS NHS Business continuity management. Part 2. Specification 7 BS 8538 Process for the evaluation, securement of intellectual property rights and the commercial advancement of inventions 8 AFNOR-France PR NF X Services of vocational rehabilitation centres - Part 1 : Vocational re-education establishements 9 PR NF X Services of vacational rehabilitation centres - Part 2 : Vocational pre-orientation centres 10 B01 ASI-Austria ÖNORM B 3822 Fire behaviour of equipment materials - Decoration articles - Testing and classification Fire protection 11 EVS-Estonia prevs Fire safety of constructions Part 8: High-rise buildings 12 DIN-Germany Boats for fire-brigade Vehicles carrying tools and gears - Part 21: GW-L1 for logistic tasks Vehicles carrying tools and gears - Part 22: GW-L2 for logistic tasks Graphical symbols for fire-brigade - Part 6: Equipments in buildings 16 NEN- Netherlands NPR 6051:2009 Concept nl Fire behaviour of building products - Validity of testing results 17 AENOR-Spain PNE Maintenance for portable fire extinguishers. 18 B02 Structures ASI-Austria ÖNORM B Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design - National specifications concerning ÖNORM EN and national comments 19 LST-Lithuania Eurocode Basis of structural design National Annex 20 Eurocode 1: Actions on structures - Part 1-2: General actions Actions on structures exposed to fire - National Annex 21 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions - National Annex 22 Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures - National Annex 23 Eurocode 3 Design of steel structures Part 1-7: Plated structures subject to out of plane loading - National Annex 24 Eurocode 4 Design of composite steel and concrete structures Part 1-2: General rules Structural fire design - National Annex 25 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design - National Annex 26 Eurocode 5: Design of timber structures - Part 2: Bridges - National Annex 27 Eurocode 6 Design of masonry structures Part 2: Design considerations, selection of materials and execution of masonry - National Annex 28 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures - National Annex 29 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings - National Annex 30 Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges - National Annex 31 Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings - National Annex 32 Eurocode 8: Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines - National Annex 33 Eurocode 8: Design of structures for earthquake resistance - Part 5: Foundations, retaining structures and geotechnical aspects - National Annex 34 Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys - National Annex 35 B04 ASI-Austria ÖNORM B Processed hydraulic additions for concrete production, marking of conformity - Part 1: Combination products Cement

2 36 ÖNORM B Processed hydraulic additions for concrete production, marking of conformity - Part 2: Ground granulated blast furnace slag for use in concrete, mortar and grout - National specifications to ÖNORM EN ÖNORM B Processed hydraulic additions for concrete production, marking of conformity - Part 3: Fly ash for concrete - National specifications to ÖNORM EN AENOR-Spain PNE Fibre-cement vertical aeration systems. Dimensions and technical characteristics 39 B05 AFNOR-France XP TS Fire safety engineering. Performance of structure in fire Fire tests 40 B07 Glass ASI-Austria ÖNORM B 3716 Bbl 1 Glass in building - Structural glass construction - Fall protection glazings - Supplement 1: Examples for glassgroups with prevention of falling 41 B08 Doors and windows BSI-United BS Code of practice for safety at powered doors for pedestrian use. Part 1. General 42 BS Code of practice for safety at powered doors for pedestrian use. Part 2. Straight and curved sliding doors and prismatic and folding doors 43 BS Code of practice for safety at powered doors for pedestrian use. Part 3. Swing doors and balanced doors 44 BS Code of practice for safety at powered doors for pedestrian use. Part 4. Low energy swing doors 45 BS Code of practice for safety at powered doors for pedestrian use. Part 5. Revolving doors 46 BS XXXX Inclusive service provision requirements for identifying and responding to consumer vulnerability. Revolving doors 47 B10 DIN-Germany Application of construction products in structures - Part 5: Strength graded structural timber with rectangular cross section Timber structures 48 B12 AENOR-Spain PNE Natural stone products. Construction of floor with natural stone. Part 3: Kerb and other complementary units for paving Masonry 49 PNE Natural stone products. Construction of slabs for facade with natural stone 50 B14 ASI-Austria ONR Geotechnics - Ground investigation for explosive ordnance Geotechnics 51 DIN-Germany DIN Geotechnical measurements - Part 2: Extensometer and convergence tape measurements 52 DIN Geotechnical measurements - Part 3: Inclinometer and deflectometer measurements 53 BSI-United BS Structural design of low-rise buildings. Part 1. Code of practice for stability, site investigation, foundations and ground floor slabs for housing 54 AENOR-Spain PNE Dynamic probing type Borro 55 B25 Gas distribution installation and related equipment NBN-Belgium prnbn D Installation pipework for commercial butane or propane in the gaseous phase at a maximum operating pressure of 5 bar and placing of consumer appliances - General prescriptions - Part 1 : Terminology + Corrigendum 56 prnbn D Installation pipework for commercial butane or propane in the gaseous phase at a maximum operating pressure of 5 bar and placing of consumer appliances - General prescriptions - Part 2 : Installation pipework 57 prnbn D Installations pipework for commercial butane or propane in the gaseous phase at a maximum operating pressure of 5 bar and placing of consumer appliances - General prescriptions - Part 3 : Placing of consumer appliances 58 B26 Road building and maintenance BSI-United BS Asphalt for roads and other paved areas. Specification for transport, laying and compaction and type testing protocols 59 SUTN-Slovakia STN Design of railway tunnels 60 AENOR-Spain PNE Vertical signs: Microprismatic polymeric retroreflecting sheetings. Characteristics and test methods 61 B27 Waterproofing materials SNV-Switzerland SIA 284 Joint sealing materials for not passable joints in buildings - Building material examination, characteristics and conformity

3 62 B31 Heating systems in buildings ASI-Austria ÖNORM H 5190 Heating systems - Acoustic insulation 63 ÖNORM H Design of water based central heating systems with or without warm water preparation - Part 1: Standard buildings 64 AFNOR-France PR NF P52-612/CN Heating systems in buildings - National addition to NF EN Default values for the calculations in clauses 6 to 9 65 B99 ASI-Austria ÖNORM L 1127 Fixtures on trees 66 ÖNORM L 1130 Golf courses as an integral part of the cultural landscape 67 BSI-United BS 5837 Trees in relation to construction. Recommendations 68 BS Specification for permamently fixed ladders. Corrigendum 4211:2005+A1:2008 Corrigendum 69 NEN- NPR 3924:2009 nl Outdoor rendering for isolated and non isolated backgrounds Netherlands 70 C01 DIN-Germany Analysis of coffee and coffee products - Determination of 16-O-methyl cafestol content of roasted coffee - HPLC-method Food products 71 AFNOR-France PR NF U Isolation on cell culture and identification by seroneutralization of infectious pancreatic necrosis virus of fish 72 PR NF U Isolation on cell culture and identification by immunofluorescence of infectious haematopoietic necrosis virus of fish 73 PR NF U Isolation on cell culture and identification by immunofluorescence of haemorrhagic septicaemia virus of fish 74 AENOR-Spain PNE Spices and condiments. Spectrophotometric determination of extractable colour of ground paprika and its oleoresins. 75 PNE Spices and condiments. Determination by spectrophotometry of picrocrocin from saffron stigmata(crocus sativus L.) 76 PNE Spices and condiments. Determination by spectrophotometry of safranal from saffron stigmata(crocus sativus L.) 77 PNE Spices and condiments. Detection of non-polar colorants and pigments by high performance liquid chromatography in saffron (Crocos sativus L.) 78 PNE Spices and condiments. Determination of the presence of salmonella in saffron by PCR. 79 C02 Paints and related products AFNOR-France PR NF T Paints and varnishes - Painting fillers for internal and/or external works - Adaptation of painting fillers to the new European standards 80 C03 AENOR-Spain PNE Cosmetic raw materials. Sorbic acid Chemistry 81 PNE Cosmetic raw materials. Methyl p-hydroxybenzoate, sodium salt 82 PNE Cosmetic raw materials. Propyl p-hydroxybenzoate, sodium salt 83 PNE Cosmetic raw materials. Lead determination. Part 1-A. Sample preparation. Acid soluble lead in talcs, pigments, and most acid insoluble materials 84 PNE Cosmetic raw materials. Lead determination. Part 1-B. Sample preparation. Total lead in acid soluble inorganic materials 85 PNE Cosmetic raw materials. Diethylenglycol stearate 86 PNE Cosmetic raw materials. Ethylene glycol diestearate 87 PNE Cosmetic raw materials. PEG-150 distearate 88 PNE Cosmetic raw materials. Lead determination. Part 1-C. Sample preparation. Total lead in organic materials. 89 PNE Cosmetic raw materials. Lead determination. Part 1-D. Sample preparation. Total lead in organic liquids. 90 PNE Cosmetic raw materials. Lead determination. Part 1-E. Sample preparation. Total lead in metal stearates. 91 PNE Cosmetic raw materials. Lead determination. Part 2. Colour development and measurement 92 C13 Fertilizers AFNOR-France XP U Organic soil improvers and growing media - Analytical method for inert compon

4 93 F02 Units & symbols DIN-Germany Units - Part 1: Unit names, unit symbols 94 F08 BSI-United BS 1134 Assessment of surface texture. Guidance for methods and instrumentation and general guidance Surfaces 95 BS Roughness comparison specimens. Part 1. Specification for turned, ground, bored, milled, shaped and planed specimens 96 BS Roughness comparison specimens. Part 2. Specimen for spark-eroded, shot-blasted, grit-blasted and polished specimens 97 F14 Graphical technology, signboards and nameplates AENOR-Spain PNE Graphic industries. Vocabulary. Part 4: Fundamental terms of computer output systems. 98 F15 Material testing in general DIN-Germany Testing of petroleum products - Determination of evaporation loss - Part 1: Noack test 99 F19 DIN-Germany Optics and photonics - FAC lenses - Vocabulary and requirements for data sheets Optics Production in optical engineering - Machine tool spindles - Part 3: Hollow taper shank connection Production in optical engineering - Diamond impregnated cup wheels - Part 2: With mounting cylinder Production in optical engineering - Diamond impregnated cup wheels - Part 4: Combinated tools Production in optical engineering - Diamond impregnated cup wheels - Part 5: Electroplated 104 F99 LST-Lithuania Standardization Part 6: Taking over of the standards and other deliverables of European organizations for standardization at a national level 105 Standardization Part 1: General provisions 106 Standardization Part 2: Common rules for standardization work Chapter 1: National level 107 AENOR-Spain PNE Social Responsibility. Social Responsibility and childhood. Guidance on good practices for the organizations 108 H09 DIN-Germany Swivelling work chair; safety requirements, testing Furniture 109 H18 BSI-United BS XXXX Specification for installation and maintenance of gas-fired micro-cogeneration packages of rated heat input not exceeding 70 kw net Central heating boilers 110 H30 AFNOR-France PR XP S Child use and care articles - Changing units and devices for baby care available in public access Equipment for children 111 H99 ASI-Austria ÖNORM H 2204 Works of installation of technical equipment in commercial kitchens - Works contract 112 ÖNORM S 1240 Bbl 1 Control book for shooting ranges for fire arms 113 I11 ASI-Austria ÖNORM Z 1541 Riveting tools - Safety guidelines for their use Machine tools 114 DIN-Germany Multi spindle head bodies - Interface multi spindle head- machine frame; frame sizes and dimensions 115 I14 DIN-Germany Gears - Cylindrical involute gears and gear pairs - Inspection dimensions of tooth thickness Gears 116 I99 DIN-Germany Connectors to taps of beverage installations - Mating dimensions 117 M04 AFNOR-France PRNF A Copper and copper alloys - Volumetric method Copper 118 PRNF A Copper and copper alloys - determination of aluminium -

5 119 M10 Metallic coatings DIN-Germany Electroplated coatings - Duplex coatings of zinc or zinc alloy coatings with organic coatings on iron or steel Electrodeposited coatings - Chromated coatings of zinc alloys on iron and steel 121 M14 AFNOR-France PRNF A Nickel alloys. Determination of Hafnium content. Inductively coupled plasma atomic emission spectrometric method Nickel 122 PRNF A Nickel alloys. Determination of Zirconium content. Inductively coupled plasma atomic emission spectrometric method 123 PRNF A Nickel alloys. Determination of Tungsten content. Inductively coupled plasma atomic emission spectrometric method 124 PRNF A Nickel alloys. Determination of Cobalt content. Inductively coupled plasma atomic emission spectrometric method 125 PRNF A Nickel alloys. Determination of Nickel content. Inductively coupled plasma atomic emission spectrometric method 126 M15 AENOR-Spain PNE High temperature corrosion. Test for the determination of the Pilling-Bedworth ratio Metallic corrosion 127 N01 Paper and board DIN-Germany Testing of paper - Inkjet mediums - Part 2: Drytime Testing of paper - Inkjet mediums - Part 100: Print image quality - optical cancellation, optical density, optical tristimulus values, print image disturbance 129 N03 ASI-Austria ÖNORM B 3613 Polymer modified bitumen for road construction - Requirements - Rules for the implementation of ÖNORM EN Petroleum products 130 N05 AFNOR-France PR NF G Elastomer or plastic two faces coated fabrics- Measurement of wicking Textiles 131 N09 AFNOR-France PR XP T Plastics - Fragmentable polyolefin mulching films for use in agriculture and horticulture - Specifications Plastics 132 AENOR-Spain PNE IN Plastics. Installation of glass reinforced plastics (GRP) tanks, above ground for storaging of liquid petroleum based fuels 133 PNE Plastics. Determination of carbon black content of polyolefins and its products. Part 2: Thermogravimetry method 134 S07 Anaesthetic and respiratory equipment AFNOR-France PR NF S Oxygen concentrator supply systems for use with medical gas pipeline systems 135 S09 ASI-Austria ONR Base units of polypropylene (PP), polyethylene (PE) or glass-reinforced thermosetting plastics based on unsaturated polyester resins (GR-UP) for Water quality and concrete manholes - Requirements, tests, quality control water supply 136 ÖNORM B Drinking water supply systems on premises - Part 1: Rules for design, construction and operation 137 DIN-Germany Treatment of the water of swimming-pools and baths - Part 1: General requirements Treatment of water of swimming-pools and baths - Part 2: Combination of process: Adsorption - flocculation - filtration - chlorination Treatment of water of swimming-pools and baths - Part 3: Combination of process: Flocculation - filtration - ozonization - absorbing filtration - chlorination Treatment of water of swimming pool and baths - Part 4: Combination of process: Flocculation - adsorption - ultrafiltration - chlorination 141 S15 DIN-Germany Medical instruments; needle holder type Crile-Wood with carbide inserts Surgical instruments Medical instruments; needle holder type Finochietto with carbide inserts Medical instruments; needle holder, type Mathieu, modification with carbide inserts Medical instruments; needle holder type Wangensteen with carbide inserts Medical instruments; gauges type Alexander

6 Medical instruments; tympanum perforators type Lucae Medical instruments; chisels type Stille Medical instruments; chisels and gauges type Partsch Medical instruments; ligature needle type Kronecker Medical instruments; raspatories type Williger Medical instruments; tissue forceps type Gillies Medical instruments; retractor type Brunner Medical instruments; intestunal spatules type Kader Medical instruments; retractor type Kocher, blade curred Medical instruments; wire guide Medical instruments; retractor type Volkmann, short, blunt Medical instruments; bone holding forceps, type Lambotte Medical instruments; handle for wire saws, type Gigli Medical instruments; retractor type Jansen 160 S23 Personal & property protection against aggression/burgl ary protection AENOR-Spain PNE IN Equivalence between the resistance levels of security glazing stated on Spanish standards UNE :1986 (withdrawn) and UNE-EN 1063: S24 DIN-Germany Soil quality - Determination of the site specific potential for translocation of non-sorbable substances Soil quality 162 S99 DS-Denmark Infection control in the health care sector - Part 6: Requirements for urinary tract catheters and other urine incontinence devices 163 AENOR-Spain PNE General criteria for the elaboration of a Self-protection Plan 164 PNE Ecotoxicology. Physical and chemical properties. Determination of partition coefficient (n-octanol/water). 165 PNE Ecotoxicology. Physical and chemical properties. Melting point-melting range. 166 PNE Ecotoxicology. Physical and chemical properties. Water solubility 167 PNE Ecotoxicology. Abiotic degradation. Hydrolysis as a function of ph 168 PNE Ecotoxicology. Physico-chemical properties. Characterization of chemical substances by the determination of the vapour pressure curve. 169 T01 DIN-Germany Marine environment protection - Treatment of waste produced on board - Part 3: Requirements for installations Shipbuilding and maritime structures 170 T02 AFNOR-France PR NF L Aerospace series. Weldments and brazements for aerospace structures. Assembly of metallic materials welded by TIG method. Quality of weldments Aerospace 171 T03 ASI-Austria ÖNORM V 5051 Evaluation of vehicles of classes M1 and N1 - Concepts and criteria Road vehicles 172 ÖNORM V 5080 Assessment of used motor vehicles of classes M1 and N1 - Procedure and criteria 173 T06 Metal and plastic containers ASI-Austria ÖNORM C 2117 Above ground storage of liquids - Prismatic steel tanks, erected on site - Construction and installation 174 AENOR-Spain PNE IN Plastics. Repairing and internal covering of metallic tanks, used for the storage of liquid fuel, with reinforced plastics 175 T14 DIN-Germany Glass containers Packaging Packaging - Guidance for Good Manufacturing Practice (GMP) in the production of packaging for foodstuffs