CE marking of industrial doors under the CPR Michael Skelding, Secretary and General Manager Door and Hardware Federation
|
|
- Terence Webster
- 6 years ago
- Views:
Transcription
1 CE marking of industrial doors under the CPR 2011 Michael Skelding, Secretary and General Manager Door and Hardware Federation
2 Who is the DHF? DHF represents manufacturers & installers of: Pedestrian doors Industrial doors & shutters Garage doors Powered gates, and Locks & architectural hardware
3 What is the DHF? A trade body, founded in 1897, representing over 200 members drawn from all parts of the door & hardware industry Sits on European & British standards committees Publishes its own technical standards & guidance documents, available from:
4 From 1 July next year: You MUST draw up a declaration of performance and apply the CE marking IF the product you place on the market is covered by a hen This includes any product covered by an existing hen, such as EN :2003 hens published from now on, such as EN 16034, will be subject to a period of coexistence before they come into effect
5 What is the CE mark? A declaration by a manufacturer that a product meets the essential health & safety requirements of one or more single market directives. (There are about 24 of these ranging from toys to electrical appliances)
6 What is the CE mark? (continued) The purpose is to allow free circulation of goods within the EEA No EEA government can exclude a CE marked product (although it can regulate its use) It is not a quality mark However, for safety-critical aspects, such as fire, it DOES guarantee performance
7 Harmonised standards (hens) Written by CEN or CENELEC in response to a Commission mandate Mandate specifies essential characteristics for the product Manufacturer must declare against essential characteristics Declaring npd may be possible EN can contain additional requirements, unrelated to CE marking
8 Essential characteristics What performance must the product possess in order to enable the building to achieve the basic requirements for construction works? Detailed in Annex Z of hen CE marking is against the Annex Z, NOT the whole standard
9 Requirements Basic works requirement CPR EU Mandate Essential characteristic Commission Performance requirement hen (Annex Z) CEN/CENELEC
10 Safety and accessibility in use...they do not present unacceptable risks of accidents or damage in service or in operation such as slipping, falling, collision, burns, electrocution, injury from explosion and burglaries. In particular, construction works must be designed and built taking into consideration accessibility and use for disabled persons.
11 TASK Assessment and verification of constancy of performance System 4 System 3 System 2+ ITT M NB M NB FPC M M M M Sample tests - - M M FPC inspection - - NB NB Certification NB FPC certification - - NB - Notified body None Test laboratory Production control certification body System 1 Product certification body
12 Relevant standards for industrial doors BS EN 13241:2003+A1:2011 Industrial, commercial and garage doors and gates Product standard - Part 1: Products without fire resistance or smoke control characteristics pren Pedestrian doorsets, industrial, commercial, garage doors and openable windows Product standard, performance characteristics Fire resisting and/or smoke control characteristics
13 Essential characteristics for which performance must be declared Characteristic: Release of dangerous substances Safe opening (for vertically moving doors ) Geometry of glazing (for glazed doors) Mechanical resistance and stability Operating forces (for power operated doors) Notified body test/calculation: YES YES NO NO YES
14 Essential characteristics for which NPD can be declared Characteristic: Watertightness Resistance to wind load Thermal resistance Air permeability Durability of environmental performance Notified body test/calculation: YES YES YES YES YES
15 Voluntary characteristics Characteristic: Mechanical aspects General Force for manual operation Mechanical durability Protection against cutting Protection against tripping Safe opening (for horizontally moving doors & gates) Power operation General Protection against crushing, shearing and drawing-in Electrical safety Electromagnetic compatibility Noise
16
17
18 CPR vs MD Construction Products Regulation CE mark exclusively based on hen Covers products intended for incorporation in buildings Installation is not manufacture No on-site CE marking No provision for partly completed products Notified body evidence required for doors Machinery Directive Use of hen is voluntary Covers machinery for most end uses Installation/putting into service can be manufacture On-site CE marking may be required Partly completed machinery must be accompanied by a declaration of incorporation Notified body not required for doors and gates
best practice guide Pedestrian doorsets Fire resisting and/or smoke control characteristics - to
best practice guide Pedestrian doorsets Fire resisting and/or smoke control characteristics - to BS EN 16034: 2014 Permission to reproduce extracts from BS EN 16034 : 2014 is granted by BSI. DHF BEST PRACTICE
More informationGuidance Note No 21/1. CE Marking Windows and doorsets to BS EN 16034
Guidance Note No 21/1 CE Marking Windows and doorsets to BS EN 16034 Introduction CE Marking of construction products has been a legal requirement since July 2013. It is a European requirement for all
More informationWindow and Door Standards for Performance and Security. Russell Day Senior Technical Officer Glass and Glazing Federation
Window and Door Standards for Performance and Security Russell Day Senior Technical Officer Glass and Glazing Federation The Standards BS EN 14351-1:2006+A2:2016 Windows and doors. Product standard, performance
More informationDomestic Garage Doors
Domestic Garage Doors Guidance for enforcement bodies www.dhfonline.org.uk Contents About dhf 1 Applicable legislation & standards 2 Annex A 5 Annex B 11 Useful links 13 About dhf dhf represents the key
More informationDeclaration of Conformity Declaration of Performance Notes
What difference is there in the information to be included in the Declaration of Performance under the CPR (as updated by Delegated Act (EU) No. 574/2014) from that currently provided in the Declaration
More information1. Terms defined in the Construction Products Regulation (CPR)
CEN/TC 351 Glossary of relevant terms related to the CPR The following list of terms provides definitions of terms related to the CPR (EU/305/2011) which are relevant for the work of CEN/TC 351 Construction
More informationThe New Generationn of Firedoors
The New Generationn of Firedoors Product Standard EN 16034 Introduction A modern company, while operating in mature sectors, is actually part of an ncreasingly technocratic world, influenced by technical,
More informationTechnical Bulletin CE marking: from 1st July 2013
Technical Bulletin CE marking: from 1st July 2013 New regulation New obligations Same CE mark We are facing the most significant change for a decade in the way that construction products are manufactured
More informationCE Marking for Fire Resistant doors. The future EN Agustín Garzón Cabrerizo Technical Director Fire Resistance Lab.
CE arking for Fire Resistant doors. The future EN 16034 Agustín Garzón Cabrerizo Technical Director Fire Resistance Lab. AFITI-LICOF 1 Overview Pedestrian doorsets, industrial, commercial, garage doors
More informationGuidance Note No 19/1. CE Marking windows and doorsets
Guidance Note No 19/1 CE Marking windows and doorsets What is CE marking? The CE marking of products in the European Union is used by manufacturers to indicate that their products conform to requirements
More informationGuideline Construction Products Regulation (EU) 305/20122
Guideline Construction Products Regulation (EU) 305/20122 Guideline: CPR 1 Table of contents Common Abbreviations... 4 Executive Summary... 5 Purpose of this guidance document... 5 Summary Requirements
More informationbest practice guide BS EN 14846: 2008 Electromechanically operated locks & striking plates to in association with
best practice guide Electromechanically operated locks & striking plates to BS EN 14846: 2008 in association with Permission to reproduce extracts from BS 3621:2007 and BS EN 12209: 2003 is granted by
More informationStandards in Security Shutters & Fire Shutters (UK & USA)
Standards in Security Shutters & Fire Shutters (UK & USA) Jason Powell 17.11.17 For UKRS Ltd Contents 1. Roller Shutter Safety Standards 1.1 UK / Europe 1.2 USA 2. Fire Shutter / Curtain Standards 2.1
More informationDeclaration of Performance and CE marking of windows and external pedestrian doorsets according to the CPR
EPW/FEMIB/UEMV Guidance Sheet CE.02 May 2013 Declaration of Performance and CE marking of windows and external pedestrian doorsets according to the CPR Edition May 2013 Guidance Sheet CE.02 Supersedes
More informationMechanically operated locks and locking plates
Mechanically operated locks and locking plates to BS EN 12209:2016 www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Mechanically operated locks and locking plates to BS EN 12209:2016 dhf Best
More informationEN CE instead of approval Opportunities for manufacturers and trading to enter new markets in Europe
EI 2 30-C5-S 200 do you know what it means? EN 16034 CE instead of approval Opportunities for manufacturers and trading to enter new markets in Europe Dipl.-Ing. Jürgen Benitz-Wildenburg, Director PR &
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 687rev1 2015-06-02 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 I - Drafting
More informationBest Practice Guide. Windows and Doors. Single-axis hinges to BS EN
Windows and Doors Single-axis hinges to BS EN 1935 www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Windows and Doors - Single-axis hinges to BS EN 1935 dhf Best Practice s This publication
More informationdhf General Information Automated Gates Guidance for enforcement bodies
Automated Gates Guidance for enforcement bodies www.dhfonline.org.uk Contents About dhf 1 Applicable legislation & standards 2 Annex A 4 Useful links 5 About dhf dhf represents the key manufacturers and
More informationF O C U S D O O R C L O S E R S
(3) - Door Closers.qxp_(3) - Door Closers Art 14/02/2014 16:14 Page 2 F O C U S D O O R C L O S E R S KD.915 With cover Successfully Tested to EN 1154 4 8 5 1 1 3 2 Adjustable 2 to 5 by Spring Closer opening
More informationFrequently Asked Questions on the Construction Products Regulation (CPR) - Enterprise and Industry
1. Must a construction product bear the CE marking after 30/06/2013? After 30/06/2013, in order to sell a construction product in the European Union (EU) the manufacturer has the obligation to issue a
More informationSee product BS EN :2010
DECLARATION OF PERFORMANCE TLX UV 10 BMTLXUV10CPR 1. Unique identification code of the product-type: TLX UV10 Breather Membrane 2. Type, batch or serial number or any other element allowing identification
More informationImplementing the Construction Products Regulation (EU) 305/2011
Implementing the Construction Products Regulation (EU) 305/2011 G. Katsarakis European Commission, DG Enterprise and Industry Unit B-1: Sustainable Industrial Policy and Construction THE EU CONSTRUCTION
More informationContents EN :2006+A2:2016 (E)
Contents European foreword... 6!Introduction"... 8 1 Scope... 9 2 Normative references... 10 2.1 Classification standards... 10 2.2 Test and calculation standards... 10 2.3 Other standards... 12 3 Terms
More informationPanic and Emergency Exit Devices
Panic and Emergency Exit Devices BS EN 1125: 2008 & BS EN 179: 2008 www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Panic and Emergency Exit Devices BS EN 1125: 2008 & BS EN 179: 2008 dhf
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 530 Rev.2 2012-04-13 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 Drafting
More informationCE marking of fire-resistant doors the right way!
Page 1 of 5 ift Rosenheim CE marking of fire-resistant doors the right way! Surveillance and certification of fire safety products 1 Introduction The product standard for doors, gates and windows with
More informationGuidance on Declaration of Performance and CE marking of windows and external pedestrian doorsets according to the CPR
EuroWindoor Guidance Sheet CE.02 December 2014 Guidance on Declaration of Performance and CE marking of windows and external pedestrian doorsets according to the CPR Edition December 2014 Guidance Sheet
More informationControlled Door Closing Devices
Controlled Door Closing Devices to BS EN 1154: 1997 + A1:2003 www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Controlled Door Closing Devices to BS EN 1154: 1997 + A1:2003 dhf Best Practice
More informationElectromagnetic Locking Devices Performance Requirements
Technical Specification Electromagnetic Locking Devices Performance Requirements DHF TS 010:2016 Technical specification produced by dhf www.dhfonline.org.uk Contents Foreword 1. Scope 2 ANNEX A Bodies
More informationYour Key to achieving C.E Marking Compliance
Your Key to achieving C.E Marking Compliance As of the 1 st July 2013 The Construction Products Regulation 2011 contains clauses relating to C E marking of products. This will therefore mean that a CE
More informationCE marking: implications for timber products
CI/SfB Xi + Xj Uniclass B9: P5 Wood Information Sheet WIS 2/3-56 Subject: Timber - general Revised: November 202 CE marking: implications for timber products The European Union (EU) requires that construction
More informationDECLARATION OF PERFORMANCE
Flooring Declaration of Performance Edition 01.07.2013 Identification no. Version no. 01 EN 1504-2: 2004 13 0921 EN 13813: 2002 DECLARATION OF PERFORMANCE Declaration of performance 1. Product Type Unique
More informationCylinder Mortice Dead lock Lockcase(mm) A=87 Backset (mm) B=55. Follower (mm) 8 Latch Bolt
Product ID: KL.1902 Name: Cylinder Mortice Dead lock Lockcase(mm) A=87 Backset (mm) B=55 Centres C=N/A Follower (mm) 8 Latch Bolt N/A Mechanism Euro- Profile Forend Finish SSS Rebates available (mm) KL.1902A
More informationDECLARATION OF PERFORMANCE
Flooring Declaration of Performance Edition 01.07.2013 Identification no. Version no. 01 EN 1504-2: 2004 08 0921 EN 13813: 2002 DECLARATION OF PERFORMANCE Declaration of performance 1. Product Type Unique
More informationDECLARATION OF PERFORMANCE
Edition 05.2014 Identification no. 02 08 02 02 001 0 000017 Version no. 02 EN 1504-2: 2004 EN 13813: 2002 13 0086 DECLARATION OF PERFORMANCE Sikafloor -24 PurCem EN 13813:2002 02 08 02 02 001 0 000017
More informationRegulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (EU CPR)
November 2013 Last updated: June 2015 Regulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (EU CPR) Frequently Asked Questions Part IV Preliminary remarks
More informationDECLARATION OF PERFORMANCE
Flooring Declaration of Performance Edition 01.07.2013 Identification no. Version no. 01 EN 1504-2: 2004 08 0921 EN 13813: 2002 DECLARATION OF PERFORMANCE Declaration of performance 1. Product Type Unique
More informationCONSTRUCTION PRODUCTS REGULATION 2011 DECLARATION OF PERFORMANCE
Page 1 of 4 CONSTRUCTION PRODUCTS REGULATION 2011 DECLARATION OF PERFORMANCE DoP Number: HUK0022 1. Unique identification code of the product-type: AR880 Series Panic Bolt, AR882 Series Reversible Panic
More informationEuropacable FAQ on CPR Status: 26/01/17
Europacable FAQ on CPR Status: 26/01/17 DISCLAIMER This FAQ document reflects the best knowledge of industry experts across Europe and the state of the art at the time of writing (July 2016). It represents
More informationCE MARKING OF WOOD-BASED PANELS
28 Market Place Grantham Lincolnshire NG31 6LR Tel: 00 44 (0) 1476 563707 Fax: 0044 (0) 1476 579314 e-mail: wpif.panelboards@virgin.net WOOD PANEL INDUSTRIES FEDERATION CE MARKING OF WOOD-BASED PANELS
More informationin accordance with Annex 111 of Regulation (EU) No. 305/2011 ( Construction Products Regulation ) ULTRA PROFLEX SP+ES GREY
DECLARATION OF PERFORMANCE in accordance with Annex 111 of Regulation (EU) No. 305/2011 ( Construction Products Regulation ) 1. Unique identification code of the product type: ULTRA PROFLEX SP+ES GREY
More informationConstruction Products Directive
Construction Products Directive Evaluation of conformity of Heat soaked thermally toughened soda lime silicate safety glass to he N 14179-2 ( September 2006) G E P V P, T H E E U R O P E A N A S S O C
More informationGuidance Note on the Construction Products Regulation
Guidance Note on the Construction Products Regulation Version 3 - October 2014 APPROVAL INSPECTION TESTING CERTIFICATION TECHNICAL APPROVALS FOR CONSTRUCTION Revisions to version 2 of Guidance Note on
More informationHardware for Sliding Doors & Folding Doors
Hardware for Sliding Doors & Folding Doors A Best Practice to BS EN 1527:2013 www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Hardware for Sliding Doors and Folding Doors A Best Practice
More informationETICS and the EU Internal Market The European framework. G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products
ETICS and the EU Internal Market The European framework G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products 1 THE EU CONSTRUCTION SECTOR The importance of the construction
More informationCONSTRUCTION PRODUCTS REGULATION 2011 DECLARATION OF PERFORMANCE
Page 1 of 4 CONSTRUCTION PRODUCTS REGULATION 2011 DECLARATION OF PERFORMANCE DoP Number: AS3002 AS3012 AS3052 1. Unique identification code of the product-type: AS3002 SIZE 1-6 OVERHEAD DOOR CLOSER SE
More informationGuide to gate safety legislation and standards
Guide to gate safety legislation and standards Guidance for the powered gate industry on current legislation and standards from the Door & Hardware Federation and endorsed by the Health and Safety Executive
More informationElectromagnetic Locking Devices
Electromagnetic Locking Devices to DHF TS 010:2016 www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Electromagnetic Locking Devices to DHF TS 010:2016 dhf Best Practice s This publication
More informationDeclaration of Performance
EN 1504-2:2004 09 0866 EN 13813 EN 1504-2:2004 DECLARATION OF PERFORMANCE 264 1. Product Type: Unique identification code of the product-type: 2. Type batch or serial number or any other element allowing
More informationSýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity
FprEN 1279-5 Umsagnarfrestur til 8.2.2018 ICS: 81.04 Gler í byggingar - Einangrunargler - Hluti 5: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity Staðfestur af
More informationSanitary appliances Communal washing troughs
BRITISH STANDARD BS EN 14296:25 Sanitary appliances Communal washing troughs The European Standard EN 14296:25 has the status of a British Standard ICS 91.14.7 BS EN 14296:25 National foreword This British
More informationThe future of the CPR, is CE marking changing? 26/10/2018
< The future of the CPR, is CE marking changing? 26/10/2018 Starting at the very beginning European Union 1989 Construction Products Directive CE marking for construction concept Fit for purpose European
More informationCPR Guide: EU Rules Practical Impact
CPR Guide: EU Rules Practical Impact December 2015 Glass for Europe is the trade association for Europe s manufacturers of flat glass. Flat glass is the material that goes into a variety of end products
More informationCo-ordination of the Group of Notified Bodies for the Construction Products /Regulation 305/2011/EU
GNB-CPR AG Co-ordination of the Group of Notified Bodies for the Construction Products /Regulation 305/2011/EU NB-CPR/AG/03/003r8a Issued: 18 December 2013 APPROVED GUIDANCE GNB-CPR position paper Generic
More informationCPR Guide: EU Rules Practical Impact
CPR Guide: EU Rules Practical Impact December 2015 About Glass for Europe Glass for Europe is the trade association for Europe s flat glass sector. Flat glass is the material that goes into a variety of
More informationAnnex of the certificate (Page 1/7) Accreditation Scope
Annex of the certificate (Page 1/7) As a Testing Laboratory Address: Organize Sanayi Bölgesi 10. Cadde No: 4 Melikgazi 38070 KAYSERİ/TÜRKİYE Phone : 90 352 321 11 06 Fax : 90 352 321 15 69 E-Mail : kayserilab@tse.org.tr
More informationThe Danish Energy Authority to carry out inspections in June and July 2012
The Danish Energy Authority to carry out inspections in June and July 2012 We check the CE marking of the insulation products of expanded polystyrene (EPS) you sell or use. And we check if you have declared
More informationDeclaration of Performance
DOPS for N300 / H350 / N500 / N700 Declaration of Performance STYROZONE N300 / H350 / N500 / N700 1000.CPR.2013.Styrozone.001 1. Unique identification code of the product-type 2. Type, batch or serial
More informationGNB-CPR Position Paper: Issuance of certificates under CPR
GNB-CPR AG Co-ordination of the Group of Notified Bodies for the Construction products Regulation (EU) No 305/2011 NB-CPR/14-612r7 Issued: 18 August 2016 APPROVED GUIDANCE GNB-CPR Position Paper: Issuance
More informationYOUR GUIDE TO UNDERSTANDING CPR
YOUR GUIDE TO UNDERSTANDING CPR WITH EXCEL NETWORKING SOLUTIONS ISSUE 2 UPDATED JANUARY 2018 WWW.EXCEL-NETWORKING.COM CONTENTS What is CPR? When will this happen? Why the update? Which products are affected?
More informationConstruction Products Directive
Construction Products Directive Evaluation of conformity of Coated glass to he N 1096-4 ( September 2006) G E P V P, T H E E U R O P E A N A S S O C I AT I O N O F F L AT G L A S S M A N U FA C T U R E
More informationIntroduction. Declaration of performance (DoP) CE marking
Introduction This guide has been written to help users and specifiers of wood based panels to understand the documentation and labelling that should accompany (on a website, e-mail or physically) wood
More informationEN :2012 EN :2012 ETAG 026 part 3:2011 DECLARATION OF PERFORMANCE. Sikasil -670 Fire
EN 15651-1:2012 EN 15651-4:2012 ETAG 026 part 3:2011 14 1104 DECLARATION OF PERFORMANCE Sikasil -670 Fire 02 05 14 03 0000 000 106 1. Product Type: Unique identification code of the product-type: 2. Type
More informationbest practice guide BS EN 12320: 2001 Padlocks & padlock fittings to in association with Permission to reproduce extracts from BS EN 12320: 2001
CI/SfB (31.9) Xt7 June 2009 best practice guide Padlocks & padlock fittings to BS EN 12320: 2001 in association with Permission to reproduce extracts from BS EN 12320: 2001 is granted by BSI. DHF BEST
More informationPRESS RELEASE
PRESS RELEASE 16-11-97 10 November 2016 "Fire safety standard" EN 16034 comes into force CE mark possible with effect from 01/11/2016 The product standard EN 16034 "Pedestrian doorsets, industrial, commercial,
More informationInstaller: (Name, address, telephone)
Installer: (Name, address, telephone) UNAC GUIDE No. 4 FOR THE MOTORISATION OF SECTIONAL GARAGE DOORS IN ACCORDANCE WITH MACHINERY DIRECTIVE 98/37/EEC AND THE APPLICABLE PARTS OF STANDARDS EN 13241-1,
More informationInstaller: (Name, address, telephone number)
Installer: (Name, address, telephone number) UNAC GUIDE No. 9 FOR THE INSTALLATION OF MOTORISED VERTICAL UPWARD SLIDING GATES IN ACCORDANCE WITH MACHINERY DIRECTIVE 98/37/EEC AND THE APPLICABLE PARTS OF
More informationBest Practice BS 3621: 2007 BS 8621: 2007 BS 10621: 2007 dhf
Thief Resistant Lock Assemblies Thief resistant lock assemblies - Key egress BS 3621: 2007 Thief resistant lock assemblies - Keyless egress BS 8621: 2007 Thief resistant dual mode lock assemblies BS 10621:
More informationSýnishorn Specification for mortar for masonry - Part 2: Masonry mortar
ÍST EN 998-2:2016 Gildistaka 15.2.2017 ICS: 91.1 Kröfur til múrs til nota í múrvirki - Hluti 2: Múr til nota í múrvirki Specification for mortar for masonry - Part 2: Masonry mortar Staðfestur af Staðlaráði
More informationInstaller: (Name, address, telephone number)
Installer: (Name, address, telephone number) UNAC GUIDE No. 11 FOR THE MOTORISATION OF HINGED PEDESTRIAN DOORS IN ACCORDANCE WITH THE MACHINERY DIRECTIVE 98/37/EEC AND THE STANDARDS pren 12650-1* - pren
More informationInstaller: (Name, address, telephone number)
Installer: (Name, address, telephone number) UNAC GUIDE No. 8 FOR THE INSTALLATION OF MOTORISED BARRIERS IN ACCORDANCE WITH MACHINERY DIRECTIVE 98/37/EEC AND THE APPLICABLE PARTS OF STANDARDS EN 13241-1,
More informationStandards and Standardisation. An Overview
Standards and Standardisation An Overview Therese Clarke Standards Development 1 NSAI Technical Committee 58/SCI Published - I.S. 398-1:2013 Reactive pyrite in sub-floor hardcore material Part 1 Testing
More informationGuide to Gate Safety Legislation & the Machinery Directive
Guide to Gate Safety Legislation & the Machinery Directive Guide to Gate Safety Legislation & Machinery Directive Gate Safety in the UK market In June 2010 the tragic deaths of 2 young children in separate
More informationCE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
More informationLiving with the Construction Products Directive - The Role of the Notified Bodies
Living with the Construction Products Directive - The Role of the Notified Bodies Francky Callewaert DG Enterprise The core of the CE marking Is obligatory for every construction product placed on the
More informationMandate M/118 WASTE WATER ENGINEERING PRODUCTS
Mandate M/118 Page 1 sur 13 Mandate M/118 TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CReatE RELATED TO THE FOLLOWING END USES 18/33 : DRAINAGE (INC. HIGHWAS)
More informationCE marking of noise barriers and foundations
CE marking of noise barriers and foundations Date 2 June 2014 Case officer Charlotte Sejr E - mail cslp@vd.dk Phone +45 7244 2340 Document 14/10726-2 Page 1/13 1 Table of Contents CE MARKING OF NOISE BARRIERS...
More informationSystem Solutions. Quick and simple to construct. Range of partitions. Fully warranted systems. CE Marked. Knauf CE Marking. A guide to CE marking
System Solutions Quick and simple to construct Range of partitions Fully warranted systems CE Marked Knauf CE Marking A guide to CE marking CE Marking From 1 July 2013 the Construction Products Regulation
More informationThis annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
Annex to ISO/IEC 7025:2005 declaration also Chamber Commerce no. 246437 This annex is valid from: 06-2-206 to 0-2-207 Replaces annex dated: 25-06-205 Locations where activities are performed under accreditation
More informationGuide to Gate Safety Legislation & the Machinery Directive. In Association with:
Guide to Gate Safety Legislation & the Machinery Directive In Association with: Tel: 0845 054 5070 asosafety@egduk.com Guide to Gate Safety Legislation & Machinery Directive Gate Safety in the UK market
More informationRecord of Amendments. Version Date Amendment Section/page affected
Industry support for effective compliance BTHA Guidance on The Restriction Of The Use Of Certain Hazardous Substances In Electrical and Electronic Equipment (recast) (RoHS) Directive 2011/65/EU Comparison
More informationInstaller: (Name, address, telephone)
Installer: (Name, address, telephone) UNAC GUIDE No. 5 FOR THE MOTORISATION OF FOLDING DOORS IN ACCORDANCE WITH MACHINERY DIRECTIVE 98/37/EEC AND THE APPLICABLE PARTS OF STANDARDS EN 13241-1, EN 12453,
More informationCOMMISSION DELEGATED REGULATION (EU)
28.5.2014 L 159/41 REGULATIONS COMMISSION DELEGATED REGULATION (EU) No 574/2014 of 21 February 2014 amending Annex III to Regulation (EU) No 305/2011 of the European Parliament and of the Council on the
More informationNew Approach vs Standards and Regulation: how it all works
New Approach vs Standards and Regulation: how it all works between the EU and an EU Member State (UK example) Volodymyr Yakubov Senior Standardization Expert, INOGATE Head of International Projects, BSI
More informationInstaller: (Name, address, telephone)
Installer: (Name, address, telephone) UNAC GUIDE No. 2 FOR THE MOTORISATION OF HINGED GATES IN ACCORDANCE WITH MACHINERY DIRECTIVE 98/37/EEC AND THE APPLICABLE PARTS OF STANDARDS EN 13241-1, EN 12453,
More informationSliding Gates White Paper 1 Sliding Gate Safety Third Edition
Sliding Gates White Paper 1 Sliding Gate Safety Third Edition Safety requirements for powered sliding gates Jeremy Procter, Managing Director of Procter Sliding Gates, explains the safety requirements
More informationThe Danish Energy Agency will carry out inspections in June 2013
Table of Contents The Danish Energy Agency will carry out inspections in June 2013... 2 What is CE marking of a construction product?... 3 Where can you find the requirements for CE marking of wood flooring?...
More informationGuidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU
GNB-CPR AG Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU NB-CPR/AG/03/002r3 Issued: 24 May 2013 APPROVED GUIDANCE GNB-CPR AG position paper Guidance to
More informationS I M P L Y C E INTRODUCTION TO CE NORMS AND STANDARDS FOR DOORS AND GATES TWO THOUSAND EIGHTEEN
S I M P L Y C E INTRODUCTION TO CE NORMS AND STANDARDS FOR DOORS AND GATES TWO THOUSAND EIGHTEEN CONTENT INTRODUCTION MAIN REQUIREMENTS CE CE FOR DOOR PRODUCING COMPANY CE FOR INSTALLER END USER FLEXIFORCE
More informationRegulation 574_2014: Annex III CPR. and. Regulation 568_2014: Annex V CPR
TF N 635 Regulation 574_2014: Annex III CPR and Regulation 568_2014: Annex V CPR 30-05-2014 28.5.2014 L 159/41 REGULATIONS COMMISSION DELEGATED REGULATION (EU) No 574/2014 of 21 February 2014 amending
More informationDECLARATION OF PERFORMANCE
EN 15651-1:2012 EN 15651-2:2012 14 1119 DECLARATION OF PERFORMANCE Sikasil WS-605 S 01 26 03 01 011 9 001000 1024 1. Product Type: Unique identification code of the product-type: 2. Type batch or serial
More informationGuidance from the Group of Notified Bodies for the Construction Products Directive 89/106/EEC
CEN/TC 88 N 2873 GNB-CPD SG19 Guidance from the Group of Notified Bodies for the Construction Products Directive 89/106/EEC NB-CPD/SG19/11/085 Issued: 19 October 2011 APPROVED - GUIDANCE GNB-CPD position
More informationSKG-IKOB Certificatie B.V. Trading under the names SKG, IKOB-BKB and SKW Certificatie
Normative document: EN ISO/IEC 7025:2005 This annex is valid from: 24-0-208 to 0-2-202 Replaces annex dated: 06-2-206 Location(s) where activities are performed under accreditation Head Office Poppenbouwing
More informationDHF Introduction DHF 2
DHF 1 DHF Introduction The Door and Hardware Federation can trace its roots right back to 1897 in the Association of Building Hardware Manufacturers. The federation now represents; Powered gate Industrial
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
More informationThe Machinery Directive 2006/42/EC
The Machinery Directive 2006/42/EC Aims of the Machinery Directive To ensure the free movement of machinery on the EU market whether manufactured in the EU or imported To ensure a high level of protection
More informationDID YOU GET USED TO THE NEW CPR? HERE S A QUICK REVIEW!
June 2018 DID YOU GET USED TO THE NEW CPR? HERE S A QUICK REVIEW! How to recognize compliant cables? The new CPR defines the rules and the requirements of construction products to be manufactured, distributed
More informationConstruction Products Regulation (CPR) and cables. British Cables Association Guidance to Specifiers
Construction Products Regulation (CPR) and cables British Cables Association Guidance to Specifiers 1 Outline In January 2017 BCA issued its Guidance to Specifiers. A key consideration at the time was
More informationÜntel is ready for CPR
2016 Üntel is ready for CPR Hakan Kubas Marketing Manager 01.11.2016 Construction Products Regulation What is the CPR? The Construction Products Regulation (CPR) lays down conditions for the placing or
More information