SensaGuard TM Integrated Latch Installation Instructions

Size: px
Start display at page:

Download "SensaGuard TM Integrated Latch Installation Instructions"

Transcription

1 TM Integrated Latch Installation Instructions Certifications IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE Note: Refer to Technical Specifications for Certification information and ratings.

2 2 TM Installation Instructions 2 Table of Contents Installation Instructions 3 Technical Specification 3 Safety Ratings 3 Operating Characteristics 3 Outputs (internally fused) 3 Environmental 3 Protection 4 Mode of Operation 4 Status Indicators 4 Mounting Information 4 Nut Torque Specification 4 Minimum Distance Between Sensors 4 Dimensions 5 Technical Data 7 Diagnostic 8 Typical Wiring Diagram 8 Troubleshooting - Series Circuit 9 Unit Response Time 10 Application Wiring Examples 11 List of Recommended Relays 16 Maintenance 16 Repair 16 Declaration of Conformity 16

3 Installation Instructions Installation must be in accordance with the following steps and stated specifications and should be carried out by suitable competent personnel. Adherence to the recommended maintenance instructions forms part of the warranty. This switch has an integrated latch and guard stop for use on lightweight guard doors. This device is intended to be part of the safety related control system of a machine. Before installation, a risk assessment should be performed to determine whether the specifications of this device are suitable for all foreseeable operational and environmental characteristics of the machine to which it is to be fitted. Refer to Technical Specifications for Certification information and ratings. ATTENTION: The presence of spare actuators compromise the integrity of the safety systems. Personal injury or death, property damage or economic loss can result. Appropriate management controls, working procedures and alternative protective measures should be introduced to control their use and availability. Technical Specification Safety Ratings Standards IEC , IEC61508, ISO Safety Classification Cat. 4 Per ISO , SIL CL3 PFH D : 1.12 x 10-9 Dual channel interlock may be suitable for Functional Safety Data use in application up to PLe (according to ISO ) and for use up to SIL3 systems (according to IEC 62061) depending application characteristics. Certifications CE marked for all applicable directives, culus (UL 508), and TÜV. Operating Characteristics Sensing Distance, Assured ON Actuator in contact with sensor Sensing Distance, Assured OFF 32 mm Maximum output current (all outputs) 200 ma Input Current 50 ma (no load supply current) Operational Current, Min. < 1 ma DC Off-state Current < 0.5 ma DC Maximum # of switches, connected in series Unlimited. See unit response time section Operating Voltage 24V DC +10% / -15% Class 2 SELV power supply Utilization category according to IEC DC-12 & DC-13 Ue 24V Ie 200mA Frequency of operating cycle 0.25 Hz Response Time (Off) 54 ms Case Material Grilamid Actuator Material Grilamid/PBT Outputs (Guard door closed, Actuator in place) Outputs Description Status Safety 2 x PNP, 0.2 A max. ON (+24vdc) Auxiliary 1 x PNP, 0.2 A max. OFF (0vdc) Environmental TM Installation Instructions 3 Operating Temperature C ( F) Operating Humidity 5% -95% relative Washdown rating NEMA 3, 4X, 12,13, IP66, IP67, IP69K Shock & Vibration IEC g, 11 ms IEC Hz Radio Frequency IEC IEC

4 4 TM Installation Instructions Protection Short-Circuit Protection Incorporated Current limitation Incorporated Overload Protection Incorporated False Pulse Protection Incorporated Transient Noise Protection Incorporated Reverse Polarity Protection Incorporated Overvoltage protection Incorporated Thermal shutdown/restart Incorporated Electrical Life 10 x 10 6 Mode of Operation Status indicators: Status/Diag LED illuminates Green - Door/Guard closed, safety outputs active. Status/Diag LED illuminates : - Door/Guard open, safety outputs off. Status/Diag LED flashes or Green: - Unit failure. See Diagnostic section below. Mounting Information Do not over torque the mounting hardware. Position the switch and actuator so they are aligned with each other. Mount the switch and actuator to removable guard, door or gate. Recommended fastener size - M6 Nut Torque Specification Switch/Actuator: 2.20 N M (19.5 in lbs) Minimum Distance Between Sensors [mm (in.)] 188 (7.4)

5 Dimensions - [mm (in.)] TM Installation Instructions 5 30,00 [ 1.18 ] 11,80 [ 0.46 ] 53,98 [ 2.13] 75,80 [ 2.98] 88,00 [ 3.46] 27,00 [ 1.06 ] 8,00 [ 0.32 ] 62,50 [ 2.46 ] 7,00 [ 0.28] 21,50 [ 0.85] 7,00 [ 0.28 ] 8,00 [ 0.32 ] 15,00 [ 0.59 ] 6,50 [ 0.26 ] 30,00 [ 1.18 ] 80,13 32,00 [ 3.16 ] [ 1.26 ] 87,00 [ 3.43 ] 100,00 [ 3.94 ]

6 6 TM Installation Instructions Mounting Information 15N Typical LOW MEDIUM LATCH FORCE SETTING 45N Typical HIGH Sliding Door M6 T30 NYLOC NUTS 440N-ASDB M6 T30 NYLOC NUTS 440N-ASDB Hinged Door M6 T30 NYLOC NUTS COVER PLATE (OPTIONAL) 440N-AHDB

7 TM Installation Instructions 7 Technical Data 32 assured OFF distance 32 assured OFF distance mm 1 mm TYPICAL SENSING ZONE BOTH POLE PIECES MUST BE IN CONTACT WITH STRIKER PLATE

8 8 TM Installation Instructions Diagnostic Unit Indicators (per IEC 60073) State Status Troubleshooting Off Not Powered NA Status/Diag Not Safe, OSSD not active NA LED Green Safe, OSSD active NA Green flash Power up test or OSSD Check 24V DC or OSSD inputs inputs not valid (yellow and red wire) Flash 1 Hz Flash OSSD Fault OSSD fault check OSSD 4 Hz Flash Recoverable / outputs are not shorted to, Non-recoverable Fault 24V DC or each other. Cycle power. Typical Wiring Diagram Description Plastic 8-Pin Micro (M12) 3-N/A 8-Safety A+ 4-Safety B+ 5-Safety A Grey Safety A Safety A+ Safety B 8-Pin Cordset Safety B+ 889D-F8AB-* White Aux A or cable version 24V DC+ 0V Green N/A * Replace symbol with 2 (2m), 5 (5m) or 10 (10m) for standard cable lengths. 2-24V DC+ 1-Aux A 7-0V 6-Safety B Note: Refer to Technical Specifications for Certification information and ratings.

9 TM Installation Instructions 9 Troubleshooting Series Circuit Actuator 5 Switch 5 White +0 V +0 V Yel +0 V +0 V Actuator 5 is in sensing range. Switch 5 is functioning properly. Series inputs are 0V. OSSDs are de-energized to 0V. Green LED is Flashing to indicate Series inputs are not 24V. Actuator 4 Switch 4 White Yel Yel 24VDC Power Supply XL120D Actuator 4 is in sensing range. Switch 4 is functioning properly. Switch 1 RTN Series inputs are 0 V. OSSDs are de-energized to 0V. Green LED is Flashing to indicate Series inputs are not 24V. +24 Actuator 3 Switch 3 White +0 V +0 V Yel +24 V +24 V Actuator 3 is in sensing range. Switch 3 has fault. See Table Above LED is flashing Actuator 1 Actuator 2 Switch 2 White Yel +24 V +24 V White Recoverable fault OSSD s are OFF Actuator 2 is in sensing range. Switch 2 is functioning properly OSSDs are energize to 24 V Green LED is ON. Actuator 1 is in sensing range. Switch 1 is functioning properly OSSDs are energize to 24 V Green LED is ON. Note: Refer to Technical Specifications for Certification information and ratings.

10 10 TM Installation Instructions Unit Response Time (does not include safety relay response time) White Yel Sensor 1 Sensor 2 24V DC Power Supply RT Yel White White Yel A2 S11 S52 S R-N23127 S21 S22 S34 A Actuator 1 Actuator 2 Actuator 3 Sensor 3 OFF ON Initial Conditions: All actuators are in sensing distance. Actuator 1 is out of sensing range. Actuator 2 and 3 are in sensing range. Actuator 1 is moved out of sensing range. Sensor 2 drops the 24 volts (red and yellow) from Sensor 1 OSSD outputs. Green LED flashes. Sensor 3 drops the 24 volts (red and yellow) from Sensor 2 OSSD outputs. Green LED flashes. 0 ms 54 ms 72 ms 90 ms Actuator 1 is moved into sensing range. Sensor 1 OSSD outputs are energized. Sensor 2 OSSD inputs (red and yellow) transition to 24V DC from Sensor 1 OSSD outputs. Sensor 2 OSSD outputs are energized Sensor 3 OSSD inputs (red and yellow) transition to 24V DC from Sensor 2 OSSD outputs. Sensor 3 OSSD outputs are energized. 0 ms 360 ms 378 ms 396 ms Note: Refer to Technical Specifications for Certification information and ratings.

11 Application Wiring Examples TM Installation Instructions 11 Unit 3 Unit 2 Unit 1 Reset A1 S11 S52 S MSR127RP S21 S22 S34 A MSR127RP with 3 sensors in series, monitored manual reset, driving 100S or 700S safety controllers A1 S11 S52 S MSR127TP S21 S22 S34 A Unit 1 Reset A1 S11 S52 S MSR127RP S21 S22 S34 A MSR127RP with 1 sensor, monitored manual reset, driving 100S or 700S safety controllers. MSR127RP with 1 sensor, automatic reset, driving 100S or 700S safety controllers Unit 1 GuardShield Unit 3 Unit 2 Unit 1 Reset A1 S11 S52 S MSR127RP S21 S22 S34 A MSR127RP with 3 sensors and 1 440L light curtain in series, monitored manual reset, driving 100S or 700S safety relays. Note: Light curtain must be last (farthest from MSR127). Note: Refer to Technical Specifications for Certification information and ratings.

12 12 TM Installation Instructions Application Wiring Examples GuardShield Unit 3 Unit 2 Unit 1 A1 S11 S52 S MSR127TP S21 S22 S34 A Unit 3 Unit 2 Unit 1 MSR127TP with 3 sensors and 1 440L light curtain in series, automatic reset, driving 100S or 700S safety contactors. Note: Light curtain must be last (farthest from MSR127) A1 S11 S52 S MSR127TP S21 S22 S34 A MSR127TP with 3 sensors in series, automatic reset, driving 100S or 700S relays. Note: Refer to Technical Specifications for Certification information and ratings.

13 Application Wiring Examples TM Installation Instructions 13 S12 S42 K3 S12 S42 K3 S20 S50 K4 S20 S50 K4 S62 S62 GuardShield S12 S20 S51 Y40 Y41 S12 S20 S11 S21 S31 S Y42 A1 440R-H R-H R-H23177 MSR221P MSR211P MSR230P S42 S50 S62 S42 S50 S62 S34 Y1 Y2 Y Y32 Y33 Y30 A2 MSR200 series with 3 sensors and 1 440L light curtain, automatic reset, driving 100S or 700S safety contactors. Note: Light curtain can be attached to any input GuardShield S12 S20 S51 Y40 Y41 S12 S20 S11 S21 S31 S Y42 A1 440R-H R-H R-H23177 MSR221P MSR211P MSR230P S42 S50 S62 S42 S50 S62 S34 Y1 Y2 Y Y32 Y33 Y30 A2 Reset MSR200 series with 3 sensors and 1 440L light curtain, manual reset, driving 100S or 700S safety contactors. Note: Light curtain can be attached to any input. Note: Refer to Technical Specifications for Certification information and ratings.

14 14 TM Installation Instructions Application Wiring Examples S12 S42 K3 S12 S42 K3 S20 S50 K4 S20 S50 K4 S62 S62 S12 S20 S51 Y40 Y41 S12 S20 S11 S21 S31 S Y42 A1 440R-H R-H R-H23177 MSR221P MSR211P MSR230P S42 S50 S62 S42 S50 S62 S34 Y1 Y2 Y Y32 Y33 Y30 A2 MSR200 series with 4 sensors, automatic reset, driving 100S or 700S safety contactors. S12 S20 S51 Y40 Y41 S12 S20 S11 S21 S31 S Y42 A1 440R-H R-H R-H23177 MSR221P MSR211P MSR230P S42 S50 S62 S42 S50 S62 S34 Y1 Y2 Y Y32 Y33 Y30 A2 Reset MSR200 series with 4 sensors, manual reset, driving 100S or 700S safety contactors. Note: Refer to Technical Specifications for Certification information and ratings.

15 Notes TM Installation Instructions 15

16 List of recommended relays TM Installation Instructions 16 MSR126, MSR127, MSR123, MSR124, MSR131, MSR138, MSR211, MSR121, MSR200 Family (Except MSR210), MSR300 Family, SmartGuard, 1791 DS DeviceNet Safety I/O. Relay must have light curtain inputs. Check the machine is isolated and stopped whenever the interlocked guard door is open. IMPORTANT: After installation and commissioning, the actuator, switch and switch lid fixing screws should be coated with tamper evident varnish or similar compound. Maintenance Every month. Check the correct operation of the switching circuit. Also check for signs of abuse or tampering. Inspect the switch casing for damage. Inspect the magnet poles and clean off any dirt or debris. Repair If there is any malfunction or damage, no attempts at repair should be made. The unit should be replaced before machine operation is allowed. Declaration of Conformity This is to declare that the products shown on this document conforms with the Essential Health and Safety Requirements (EHSR s) of the European Machinery Directive 2006/42/EC. These products also conform to EN , EN 1088, EN ISO 12100, EN and have Third Party Approval. For a comprehensive certificate please visit: R Copyright 2012 Rockwell Automation, Inc. All Rights Reserved. PN Ver04 October 2011

Magnetically Coded Non-contact Switch (MC2)

Magnetically Coded Non-contact Switch (MC2) Installation Instructions Original Instructions Magnetically Coded Non-contact Switch (MC2) Catalog Numbers N-Z21W1PA, N-Z21W1PB, N-Z21W1PH Save these instructions for future reference. WARNING: Do not

More information

Lifeline 5 Cable-pull Safety Switch

Lifeline 5 Cable-pull Safety Switch Installation Instructions Original Instructions Lifeline 5 Cable-pull Safety Switch Catalog Numbers 440E-LL5SS8, 440E-LL5SS5, 440E-LL5SE8, 440E-LL5SE5, 440E-LL5SN8, 440E-LL5SN5 Topic Additional Resources

More information

ISIS SAFETY SYSTEM Installation guide

ISIS SAFETY SYSTEM Installation guide ISIS SAFETY SYSTEM Installation guide CAUTION This information is designed to help suitably qualified personnel install and operate Mechan Safety equipment. Before using this product, read this guide thoroughly

More information

Original instructions Sense7-series Non-contact coded safety switch

Original instructions Sense7-series Non-contact coded safety switch Original instructions Sense7-series Non-contact coded safety switch ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/lowvoltage Read and understand this document Please

More information

Operating instructions Safety-monitoring module SRB 302X3. 1. About this document. Content

Operating instructions Safety-monitoring module SRB 302X3. 1. About this document. Content 8 Appendix 8.1 Wiring examples...4 8.2 Start configuration...4 8.3 Sensor configuration...4 8.4 Actuator configuration...5 Operating instructions.............pages 1 to 6 Original 9 EU Declaration of conformity

More information

Operating instructions Safety-monitoring module SRB 302X3. 1 About this document

Operating instructions Safety-monitoring module SRB 302X3. 1 About this document 1 About this document Operating instructions... pages 1 to 6 Translation of the original operating instructions 1.1 Function This operating instructions manual provides all the information you need for

More information

Series Description. Features. Available Models. Specifications. Specifications for All Models. Specifications for Standard Models

Series Description. Features. Available Models. Specifications. Specifications for All Models. Specifications for Standard Models Series 9000 Description The Series 9000 photoelectric sensors are designed to perform in the harshest of industrial environments. The sensor will withstand 1200 psi high-pressure washdown and IP69K, which

More information

Original operating instructions Safety switch with guard locking AC901S AC902S

Original operating instructions Safety switch with guard locking AC901S AC902S Original operating instructions Safety switch with guard locking AC901S AC902S 7390914/03 01/2017 Contents 1 Preliminary note...4 1.1 Explanation of symbols...4 2 Safety instructions...4 3 Items supplied...5

More information

RFID Non-contact switches are designed to monitor hinged, sliding or removable guard doors. RFID technology provides increased tamper resistance.

RFID Non-contact switches are designed to monitor hinged, sliding or removable guard doors. RFID technology provides increased tamper resistance. RFID Non-contact Safety Switches RFID Non-contact switches are designed to monitor hinged, sliding or removable guard doors. RFID technology provides increased tamper resistance. Based on RFID technology,

More information

panasonic.net/id/pidsx/global Gentle start-up switches in accordance with ergonomics Reduces load on hands and fingers

panasonic.net/id/pidsx/global Gentle start-up switches in accordance with ergonomics Reduces load on hands and fingers 687 Optical Touch Switch SW-1 SERIES Related Information General terms and conditions... F-3 General precautions... P.1595 PHOTO PHOTO Conforming to OSHA / ANSI Listing MEASURE panasonic.net/id/pidsx/global

More information

GuardShield PAC Type 4 (Perimeter Access Control) Safety Light Curtain User Manual

GuardShield PAC Type 4 (Perimeter Access Control) Safety Light Curtain User Manual GuardShield PAC Type 4 (Perimeter Access Control) Safety Light Curtain User Manual Important User Information Because of the variety of uses for the products described in this publication, those responsible

More information

Original operating instructions Photoelectric safety sensors (safety light curtain / safety light grid) Protected area width (range) 0...

Original operating instructions Photoelectric safety sensors (safety light curtain / safety light grid) Protected area width (range) 0... Original operating instructions Photoelectric safety sensors (safety light curtain / safety light grid) Protected area width (range) 0...12 m OY UK 704555 / 05 02 / 2018 Contents 1 Preliminary note...4

More information

Safety Function: Single-beam Area Access Control (AAC)

Safety Function: Single-beam Area Access Control (AAC) Application Technique Safety Function: Single-beam Area Access Control (AAC) Products: Guardmaster Dual-input Safety Relay, Single-beam Area Access Control Sensors with E-stop Safety Rating: CAT. 4, PLe

More information

Bulletin 440N-Z 440N-S 440K 440G. Sipha Magnetically Coded Non Contact Switches

Bulletin 440N-Z 440N-S 440K 440G. Sipha Magnetically Coded Non Contact Switches Bulletin 440N-S, 440N-Z, 440K, 440G Product Line Overview Safety Interlock (440N-S, 440N-Z, 440K, 440G) 6 / 2011 Bulletin 440N-Z 440N-S 440K 440G Type Standards Product Selection SensaGuard RF-ID Coded

More information

Safety Control Modules for Emergency Stop Circuits FF-SRS5988 FF-SRS5935 FF-SRS5925 FF-SRS5934 FF-SRS5924 TYPICAL APPLICATIONS APPROVALS DIMENSIONS

Safety Control Modules for Emergency Stop Circuits FF-SRS5988 FF-SRS5935 FF-SRS5925 FF-SRS5934 FF-SRS5924 TYPICAL APPLICATIONS APPROVALS DIMENSIONS Safety Control Modules for Emergency Stop Circuits TYPICAL APPLICATIONS APPROVALS DIMENSIONS Single Channel Emergency Stop Module E-Stop circuits up to Category 2 (EN 954-) Sliding door protection Conveyors

More information

Operating Guide Safe Torque Off

Operating Guide Safe Torque Off ENGINEERING TOMORROW Operating Guide Safe Torque Off VLT Frequency Converters vlt-drives.danfoss.com Contents Operating Guide Contents 1 Introduction 2 1.1 Purpose of the Manual 2 1.2 Additional Resources

More information

Operating Guide Safe Torque Off

Operating Guide Safe Torque Off ENGINEERING TOMORROW Operating Guide Safe Torque Off VLT Frequency Converters vlt-drives.danfoss.com Contents Operating Guide Contents 1 Introduction 2 1.1 Purpose of the Manual 2 1.2 Additional Resources

More information

Datasheet - MZM 100 ST2-1P2PWREM-A

Datasheet - MZM 100 ST2-1P2PWREM-A 30.05.2015-14:45:08h Datasheet - MZM 100 ST2-1P2PWREM-A Solenoid interlock / MZM 100 Preferred typ Guard locking monitored Automatic latching Solenoid interlocks (for the protection of man) with innovating

More information

One giant leap for safety: AZM400.

One giant leap for safety: AZM400. One giant leap for safety: AZM400. Holding force: Unlocking against lateral force: Mechanical life: Protection class: Dimensions: Supply voltage: Electrical connection: AZM400 10,000 N 300 N > 1,000,000

More information

SAFETY MANUAL. X2200 UV, X9800 IR, X5200 UVIR SIL 2 Certified Flame Detectors

SAFETY MANUAL. X2200 UV, X9800 IR, X5200 UVIR SIL 2 Certified Flame Detectors SAFETY MANUAL X2200 UV, X9800 IR, X5200 UVIR SIL 2 Certified Flame Detectors SAFETY-CERTIFIED Flame DETECTORs This manual addresses the specific requirements and recommendations applicable to the proper

More information

Datasheet - MZM 100 ST-SD2PREM-A

Datasheet - MZM 100 ST-SD2PREM-A 19.03.2014-10:31:42h Datasheet - MZM 100 ST-SD2PREM-A Solenoid interlock / MZM 100 Preferred typ Guard locking monitored Automatic latching Solenoid interlocks (for the protection of man) with innovating

More information

Datasheet - MZM 100 B ST2-SD2PREM-A

Datasheet - MZM 100 B ST2-SD2PREM-A 30.05.2015-14:46:12h Datasheet - MZM 100 B ST2-SD2PREM-A Solenoid interlock / MZM 100 Preferred typ Actuator monitored Automatic latching Solenoid interlocks (for the protection of man) with innovating

More information

/ / 2018

/ / 2018 Original operating instructions Photoelectric safety sensors (safety light curtain / safety light grid) with IP69K protective tube Protected area width (range) 0...10 m OY4xxS UK 704859 / 05 02 / 2018

More information

SAFETY MANUAL. Multispectrum IR Flame Detector X3301

SAFETY MANUAL. Multispectrum IR Flame Detector X3301 SAFETY MANUAL Multispectrum IR Flame Detector X3301 SAFETY-CERTIFIED MODEL X3301 MULTISPECTRUM INFRARED DETECTOR This manual addresses the specific requirements and recommendations applicable to the proper

More information

RE-PR3-E-27 3-Phase Panel Mount 27kW

RE-PR3-E-27 3-Phase Panel Mount 27kW Page 1 of 6 RE-PR3-E-27 3-Phase Panel Mount 27kW Features: Benefits: 0-10Vdc, 0-5Vdc, 4-20mA or manual via potentiometer control input Over temperature protection with auto reset Enclosed panel mounting

More information

Safety Light Curtains Area Access Control

Safety Light Curtains Area Access Control Presence Sensing Safety Devices Description The AAC photoelectric safety switch is a single-beam, noncontact presence sensing safety device consisting of separate transmitter and receiver units. The light

More information

Operating Manual MS220KA and MSR220KA

Operating Manual MS220KA and MSR220KA Temperature Relays and MINIKA, Mains Monitoring, Digital Panel meters MINIPAN, Switching Relays and Controls Operating Manual MS220KA and MSR220KA ZIEHL industrie elektronik GmbH + Co KG Daimlerstraße

More information

BES M30EP-PFC12F-S04G-D12 BES Q40ZU-PFC15B-S04G-D12 BES Q40ZU-PFC20F-S04G-D12 Inductive Safety Sensors User's Manual

BES M30EP-PFC12F-S04G-D12 BES Q40ZU-PFC15B-S04G-D12 BES Q40ZU-PFC20F-S04G-D12 Inductive Safety Sensors User's Manual BES M3EP-PFC12F-S4G-D12 BES Q4ZU-PFC15B-S4G-D12 BES Q4ZU-PFC2F-S4G-D12 Inductive Safety Sensors User's Manual english www.balluff.com Original user's guide All rights reserved. Protected within the legally

More information

SAFETY INTERFACES SAFETY INTERFACES AND RELAYS

SAFETY INTERFACES SAFETY INTERFACES AND RELAYS SAFETY INTERFACES SAFETY INTERFACES AND RELAYS AD SR1 TYPE 4 INTERFACE FOR LIGHT CURTAINS Interface module between the safety light curtains EOS4 A, EOS2 A, Admiral AD, Admiral AX BK, Vision V with self-testing

More information

Original instructions INCA-1 Emergency stop for enclosure installation INCA-1S Safety stop for enclosure installation

Original instructions INCA-1 Emergency stop for enclosure installation INCA-1S Safety stop for enclosure installation Original instructions INCA-1 Emergency stop for enclosure installation INCA-1S Safety stop for enclosure installation ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/lowvoltage

More information

Safety. Detection. Control. SAFETY INTERFACES. Safety Interfaces and Relays. Product catalogue. Issue 1

Safety. Detection. Control. SAFETY INTERFACES. Safety Interfaces and Relays. Product catalogue. Issue 1 Safety. Detection. Control. Issue 1 SAFETY INTERFACES Safety Interfaces and Relays Product catalogue OVERVIEW SAFETY INTERFACES AND RELAYS MG d1 PL d control unit for ReeR Magnus magnetic switches See

More information

INSTRUCTION MANUAL (ATEX/IECEx/SIL2) BExBG05D-SIL Flameproof Xenon SIL 2 Beacons For use in Flammable Gas and Dust Atmospheres

INSTRUCTION MANUAL (ATEX/IECEx/SIL2) BExBG05D-SIL Flameproof Xenon SIL 2 Beacons For use in Flammable Gas and Dust Atmospheres INSTRUCTION MANUAL (ATEX/IECEx/SIL2) BExBG05D-SIL Flameproof Xenon SIL 2 Beacons For use in Flammable Gas and Dust Atmospheres 1) Introduction The BExBG05D-SIL is a flameproof beacon which is certified

More information

5 m pre-wired 2NC/1NO F3S-TGR-NLMX m pre-wired 2NC/1NO F3S-TGR-NLMX m pre-wired 2NC/1NO F3S-TGR-NBMX-21-05

5 m pre-wired 2NC/1NO F3S-TGR-NLMX m pre-wired 2NC/1NO F3S-TGR-NLMX m pre-wired 2NC/1NO F3S-TGR-NBMX-21-05 Explosion proof Non-contact Safety Switches Explosion proof reed non-contact switches monitor the status of guarding doors in petro-chemical and food applications with explosive atmospheres. Based on reed

More information

MA Series. Safety, Technology & Innovation MA 12 MA 13. Description. Approvals. Operation. Applications. Declaration Conformity

MA Series. Safety, Technology & Innovation MA 12 MA 13. Description. Approvals. Operation. Applications. Declaration Conformity , Technology & Innovation MA Series Operating Instructions for MA-12 & MA-13 Switches KEEP THIS GUIDE FOR FUTURE REFERENCE This information is designed to help suitably qualified personnel install and

More information

culus and CE Marked for all applicable directives Operating Environment Operating Temperature [C (F)]

culus and CE Marked for all applicable directives Operating Environment Operating Temperature [C (F)] 8 mm Cylindrical Description The 8 mm cylindrical family of general purpose photoelectric sensors is intended for light to medium duty industrial applications. The family provides an indication if the

More information

DEB71. Earth Leakage Monitoring Relay. Benefits. Description

DEB71. Earth Leakage Monitoring Relay. Benefits. Description Earth Leakage Monitoring Relay Benefits Adjustable trip level. Adjustable leakage threshold from 30mA to 5A or from 300mA to 30A. 2 outputs. Two relay outputs provide, besides the alarm signal an additional

More information

panasonic.net/id/pidsx/global Lights up when conditions are normal (and at incipient liquid leak detection) Use as a warning Sensor

panasonic.net/id/pidsx/global Lights up when conditions are normal (and at incipient liquid leak detection) Use as a warning Sensor 867 Safety Sensor SERIES Related Information General terms and conditions... F-3 General precautions... P.1595 guide... P.865~ Korea s S-mark... P.1602 PHOTO PHOTO Certified by NRTL Conforming to SEMI-S2

More information

Safety Sensor Eden AS-i Machine safety - Jokab Safety products

Safety Sensor Eden AS-i Machine safety - Jokab Safety products Safety Sensor Eden AS-i Machine safety - Jokab Safety products We develop products and solutions for machine safety The fact that the leading power and automation technology company, ABB, and a leader

More information

CM Series. Safety, Technology & Innovation. Description. Approvals. Operation. Applications. Certificate of Conformity

CM Series. Safety, Technology & Innovation. Description. Approvals. Operation. Applications. Certificate of Conformity CM Series Description Safety, Technology & Innovation Operating Instructions for Safety Switches KEEP THIS GUIDE FOR FUTURE REFERENCE This information is designed to help suitably qualified personnel install

More information

ACSI AO ELECTRIC LATCH RETRACTION CONTROLLER INSTALLATION INSTRUCTIONS I.D. 1089, REV. F

ACSI AO ELECTRIC LATCH RETRACTION CONTROLLER INSTALLATION INSTRUCTIONS I.D. 1089, REV. F II 1400-2 ACSI 1406-04-AO ELECTRIC LATCH RETRACTION CONTROLLER INSTALLATION INSTRUCTIONS I.D. 1089, REV. F INSTALLATION Transformer Model BE31763001 by Basler Electric, Transformer Model 2010028 by Galaxy

More information

GESTRA Steam Systems NRS English. Installation Instructions Level Switch NRS 1-51

GESTRA Steam Systems NRS English. Installation Instructions Level Switch NRS 1-51 GESTRA Steam Systems NRS 1-51 EN English Installation Instructions 818955-04 Level Switch NRS 1-51 1 Contents Application Page Usage for the intended purpose...4 Function...4 Directives and Standards Pressure

More information

Residual Current Devices

Residual Current Devices Residual devices F200 Series UL 1053 Residual devices F200 Series Residual Current Devices Description The F200 Series residual devices offer a wide range of product for all of your fault protection needs.

More information

INSTRUCTION MANUAL T119 1MN0110 REV. 0. operates with ISO9001 certified quality system

INSTRUCTION MANUAL T119 1MN0110 REV. 0. operates with ISO9001 certified quality system INSTRUCTION MANUAL 1MN0110 REV. 0 operates with ISO9001 certified quality system TECSYSTEM S.r.l. 20094 Corsico (MI) Tel.: +39-024581861 Fax: +39-0248600783 http://www.tecsystem.it R. 1.1 25/08/16 ENGLISH

More information

NIR O P E R A T I N G I N S T R U C T I O N S RETROREFLECTIVE PHOTOEYE U L M O N I T O R E D DEVICE

NIR O P E R A T I N G I N S T R U C T I O N S RETROREFLECTIVE PHOTOEYE U L M O N I T O R E D DEVICE O P E R A T I N G I N S T R U C T I O N S NIR-50-325 RETROREFLECTIVE PHOTOEYE U L 3 2 5-2 0 1 8 M O N I T O R E D DEVICE 4564 Johnston Parkway, Cleveland, Ohio 44128 P. 800 426 9912 F. 216 518 9884 Sales

More information

1 Description. 2 Specifications. HP600ULM Access Control Power Supply/Charger with Power Distribution Controller PN 52393:A 1/05/06 ECN

1 Description. 2 Specifications. HP600ULM Access Control Power Supply/Charger with Power Distribution Controller PN 52393:A 1/05/06 ECN Honeywell 12 Clintonville Road Northford, CT 06472 http://www.honeywellpower.com HP600ULM Access Control Power Supply/Charger with Power Distribution Controller PN 52393:A 1/05/06 ECN 04-350 Product Installation

More information

Technical Data. General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm

Technical Data. General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm 0102 Model Number Features Direct mounting on standard actuators EC-Type Examination Certificate TÜV99 ATEX 1479X Accessories BT32 BT32XS BT32XAS BT33 BT34 V1-G-N4-5M-PUR Female cordset, M12, 4-pin, NAMUR,

More information

GESTRA Steam Systems NRS For TWO Electrodes. English. Installation Instructions Level Switch NRS 1-50

GESTRA Steam Systems NRS For TWO Electrodes. English. Installation Instructions Level Switch NRS 1-50 GESTRA Steam Systems NRS 1-50 For TWO Electrodes EN English Installation Instructions 818953-06 Level Switch NRS 1-50 1 Contents Application Page Usage for the intended purpose...4 Function...4 Directives

More information

MACHINERY SAFEBOOK 5. Safety related control systems for machinery. Principles, standards and implementation. (Revision 5 of the Safebook series)

MACHINERY SAFEBOOK 5. Safety related control systems for machinery. Principles, standards and implementation. (Revision 5 of the Safebook series) Safety related control systems for machinery Principles, standards and implementation (Revision 5 of the Safebook series) MACHINERY SAFBOOK 5 Content Chapter 1 Regulations 2 EU Directives and Legislation,

More information

GuardShield TM Safe 4 GuardShield TM Safe 4 PAC

GuardShield TM Safe 4 GuardShield TM Safe 4 PAC Operation Manual GuardShield TM Safe 4 GuardShield TM Safe 4 PAC Safety Light Curtain GuardShield Safe 4 Operation Manual 2 Operation Manual GuardShield Safe 4 Conditions required for proper use of the

More information

Functional Safety of Machinery Presented by Greg Richards Manufacturing in America 02/22-23/2017

Functional Safety of Machinery Presented by Greg Richards Manufacturing in America 02/22-23/2017 Functional Safety of Machinery Presented by Greg Richards Manufacturing in America 02/22-23/2017 AGENDA Definition of Safety? Machinery Safety Standards Comparison of ISO 13849-1 and IEC 62061 Safety-related

More information

Multifunctional Gate Box MGB. More than safety.

Multifunctional Gate Box MGB. More than safety. Multifunctional Gate Box MGB More than safety. Safety More than safety. Emil Euchner, the company s founder and inventor of the multiple limit switch, circa 98. Around the world the Swabian specialists

More information

Original instructions JSNY7 Magnetic switch

Original instructions JSNY7 Magnetic switch Original instructions JSNY7 Magnetic switch ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.jokabsafety.com Read and understand this document Please read and understand this

More information

PROTECT SRB 200EXi-1A

PROTECT SRB 200EXi-1A 2 Installation up to zone 1/21 J S L1 0V X1 X3 S11 S12 S21 S22 Installation up to zone 2 A1 F1 F2 U B U EXi U i 0V S12 S22 X1 X3 K1 Logic K2 K1 K2 13 23 U EXi SRB 200EXi U B -1A U i K1 K2 PA PA A1 A2 13

More information

pre-wired E3FA-TP11-F2 2M E3FB-TP11-F2 2M

pre-wired E3FA-TP11-F2 2M E3FB-TP11-F2 2M PHOTOELECTRIC SENSORS EFA/B_-F Special family with inverted output logic Fully compatible with previous EF family Simple installation due to compact format Wide variety of models Ordering Information EFA/B

More information

FACTORY AUTOMATION. Instruction Manual NBB20-L2-E2B-C-V1 NBN40-L2-E2B-C-V1 Inductive Sensor

FACTORY AUTOMATION. Instruction Manual NBB20-L2-E2B-C-V1 NBN40-L2-E2B-C-V1 Inductive Sensor FACTORY AUTOMATION Instruction Manual NBB20-L2-E2B-C-V1 NBN40-L2-E2B-C-V1 Inductive Sensor Part. No. 202415 / DOCT-1310 / 05. june 2007 1 Sensor description...............................................

More information

Revision: None DCN No. First Issue Date: November 30, 1998 Product: Standard DCT, 120-volts

Revision: None DCN No. First Issue Date: November 30, 1998 Product: Standard DCT, 120-volts Figure 1Document: SPEC-112 Revision: None DCN No. First Issue Date: November 30, 1998 Product: Standard DCT, 120-volts construction requirements of UL approved Class H (180 C) insulation system. Transformers

More information

ZIOU/230 - MAINS IO INSTRUCTION MANUAL

ZIOU/230 - MAINS IO INSTRUCTION MANUAL Description ZIOU/230 - MAINS IO INSTRUCTION MANUAL The Mains IO Modules are fully monitored loop powered devices which permit the interfacing of third party equipment with the Fire Alarm Control panel

More information

More than safety. Operating Instructions Safety Switch CET.-AS-...-CB-... (Multicode)

More than safety. Operating Instructions Safety Switch CET.-AS-...-CB-... (Multicode) More than safety. Operating Instructions Safety Switch CET.-AS-...-CB-... (Multicode) Contents Correct use 3 Possible combinations for CET components 4 Exclusion of liability and warranty 4 General safety

More information

Project planning (original) EN. Functional safety. Inverter i550-cabinet kw

Project planning (original) EN. Functional safety. Inverter i550-cabinet kw Project planning (original) EN Functional safety Inverter i550-cabinet 0.25... 45 kw This page intentionally left blank! Contents Contents Safety instructions 4 Basic safety measures 4 Residual hazards

More information

LZR -I30. max. detection range of 30 ft x 30 ft LASER SCANNERS FOR INDUSTRIAL DOORS LZR-I Page 1 of 12

LZR -I30. max. detection range of 30 ft x 30 ft LASER SCANNERS FOR INDUSTRIAL DOORS LZR-I Page 1 of 12 EN LZR -I30 LASER SCANNERS FOR INDUSTRIAL DOORS max. detection range of 30 ft x 30 ft 75.5667.07 LZR-I30 0509 Page of SAFETY The device contains IR and visible laser diodes. IR laser: wavelength 905nm;

More information

Multi-Gas-Controller MGC2

Multi-Gas-Controller MGC2 Page 1 Aug. 2018 Gas measuring, monitoring and warning controller based on state-of-the-art micro-technology for continuous monitoring of the ambient air to detect toxic and combustible gases, refrigerants

More information

Power Supply Display Module PSDM. Installation and Operation Manual

Power Supply Display Module PSDM. Installation and Operation Manual Power Supply Display Module PSDM Installation and Operation Manual Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual can result in serious

More information

Sigma. K1000 Series 1, 2, 4 & 6 Zone Fire Control Panels. Operation and Maintenance Manual. Man-1048 Issue 05 October 2009

Sigma. K1000 Series 1, 2, 4 & 6 Zone Fire Control Panels. Operation and Maintenance Manual. Man-1048 Issue 05 October 2009 Sigma K1000 Series 1, 2, 4 & 6 Zone Fire Control Panels Operation and Maintenance Manual Man-1048 Issue 05 October 2009 CONTENTS Contents... Page Safety & Installation...2 Installation - continued...3

More information

General terms and conditions... F-7 General precautions... P panasonic.net/id/pidsx/global. Use as a warning. Sensor. Emergency stop.

General terms and conditions... F-7 General precautions... P panasonic.net/id/pidsx/global. Use as a warning. Sensor. Emergency stop. 897 Safety Sensor SERIES Related Information General terms and conditions... F-7 General precautions... P.1501 Sensor selection guide... P.885~ Korea s S-mark... P.1506 PHOTO PHOTO Conforming to Machinery

More information

LZR -I100/ -I110. LASER SCANNERS for industrial doors. User s Guide for product version 0600 and more

LZR -I100/ -I110. LASER SCANNERS for industrial doors. User s Guide for product version 0600 and more EN LZR -I00/ -I0 LASER SCANNERS for industrial doors I00: max. detection range of 9.9 m x 9.9 m I0: max. detection range of 5.0 m x 5.0 m User s Guide for product version 0600 and more SAFETY The device

More information

ACM8 Series UL Listed Sub-Assembly Access Power Controllers. Installation Guide. ACM8 - Eight (8) Fuse Protected Outputs

ACM8 Series UL Listed Sub-Assembly Access Power Controllers. Installation Guide. ACM8 - Eight (8) Fuse Protected Outputs ACM8 Series UL Listed Sub-Assembly Access Power Controllers Installation Guide Models Include: ACM8 - Eight (8) Fuse Protected Outputs ACM8CB - Eight (8) PTC Protected Outputs Rev. 042811 More than just

More information

Process Alarm Module RTA 421

Process Alarm Module RTA 421 Technical Information TI 074R/24/ae Process Alarm Module RTA 421 Alarm module and power supply for monitoring current or voltage signals Application Areas Plant and machine construction Panel builders

More information

SAFEMASTER PRO. The configurable safety system versatile and extendable. Our experience. Your safety.

SAFEMASTER PRO. The configurable safety system versatile and extendable. Our experience. Your safety. SAFEMASTER PRO The configurable safety system versatile and extendable Our experience. Your safety. The modular safety system: Safe flexibility SAFEMASTER PRO: also as a stand-alone solution You may know

More information

THERMAL BUILDING SOLUTIONS EN-TraceTekTTSIM1A-IM-H /16

THERMAL BUILDING SOLUTIONS EN-TraceTekTTSIM1A-IM-H /16 TraceTek TTSIM-1A TraceTek Sensor Interface Module with Relay Installation/OPERATION Instructions Approvals and Certifications TYPE NM General Signaling Equipment 76LJ Only AC versions are UL listed and

More information

Overload relays. General descriptions. Configuration of the front

Overload relays. General descriptions. Configuration of the front Overload relays General descriptions Type MT, bimetal-style, overload relays are designed to protect AC circuits and motors against overloads, phase failure, long starting times and prolonged stalling

More information

FF-ST4 Series. Type 4 Safety Light Curtains. Potential Applications. Features

FF-ST4 Series. Type 4 Safety Light Curtains. Potential Applications. Features C US FF-ST Series Type Safety Light Curtains Approved as Type per IEC/EN 19-1/ Description The FF-ST Series is designed for hazardous point-of-operation or access detection in industrial machine safeguarding

More information

Technical Data. General specifications Switching element function Rated operating distance s n 4 mm

Technical Data. General specifications Switching element function Rated operating distance s n 4 mm 0102 Model Number Features 4 mm non-flush Accessories BF 12 Mounting flange, 12 mm Technical Data specifications Switching element function NAMUR, NO Rated operating distance s n 4 mm Installation non-flush

More information

PD154 & PD158 VIGILANTE II ANNUNCIATORS Instruction Manual

PD154 & PD158 VIGILANTE II ANNUNCIATORS Instruction Manual PD154 & PD158 VIGILANTE II ANNUNCIATORS 8 Field Selectable Sequences All Common ISA Sequences 4 or 8-Point (Channel) Monitoring Free Replaceable Message Labels Type 4X, NEMA 4X, IP65 Front Universal Power

More information

MICRO SWITCH Key Actuated Safety Switches GKN Series Issue 3. Datasheet FEATURES POTENTIAL APPLICATIONS DESCRIPTION DIFFERENTIATION PORTFOLIO

MICRO SWITCH Key Actuated Safety Switches GKN Series Issue 3. Datasheet FEATURES POTENTIAL APPLICATIONS DESCRIPTION DIFFERENTIATION PORTFOLIO MICRO SWITCH Key Actuated Safety Switches GKN Series 004740 Issue 3 Datasheet FEATURES Red switch body for easy safety recognition Four different styles of stainless steel actuator keys Three conduits

More information

ESP TECHNOLOGIES LIMITED

ESP TECHNOLOGIES LIMITED Alarm Technology ESPAN-01 Series Annunciator System Combination type User Manual (Rev. 1) ESP TECHNOLOGIES LIMITED www.esptechno.com Content Page Introduction 2 General Description 2 Overview - Annunciator

More information

Monitored Pneumatic Valves On Series Ported Manifold

Monitored Pneumatic Valves On Series Ported Manifold Monitored Pneumatic Valves On Series Ported Manifold Patented Technology SUITABLE FOR RISK CATEGORY 4 APPLICATIONS As per EN 954-1 & AS4024.1 SIL 3 as per IEC 61508 Applications Include: Pneumatic Presses

More information

RELEASE DEVICES RELEASE DEVICE-WPS MODELS A/B INSTALLATION MANUAL U.L. LISTED CANADIAN LISTED CSFM: :100 GENERAL DESCRIPTION:

RELEASE DEVICES RELEASE DEVICE-WPS MODELS A/B INSTALLATION MANUAL U.L. LISTED CANADIAN LISTED CSFM: :100 GENERAL DESCRIPTION: RELEASE DEVICES MADE IN THE U.S.A. RELEASE DEVICE-WPS MODELS A/B INSTALLATION MANUAL U.L. LISTED CANADIAN LISTED CSFM: 7300-1418:100 GENERAL DESCRIPTION: S/N: The "WPS" World Power Series, Time Delay Release

More information

XUM0APSAM8 photo-electric sensor - XUM - multi - Sn 0..10m VDC - M8

XUM0APSAM8 photo-electric sensor - XUM - multi - Sn 0..10m VDC - M8 Characteristics photo-electric sensor - XUM - multi - Sn 0..10m - 12..24VDC - M8 Main Range of product Series name Electronic sensor type Sensor name Sensor design Detection system Material Type of output

More information

Technical Data. Dimensions

Technical Data. Dimensions 0102 Model Number Features 15 mm non-flush Technical Data specifications Switching element function NAMUR, NC Rated operating distance s n 15 mm Installation non-flush Assured operating distance s a 0...

More information

Photobeam 5000 ISC-FPB1-W60QS, ISC-FPB1-W120QS, ISC-FPB1-W200QS. en Installation and Operation Guide

Photobeam 5000 ISC-FPB1-W60QS, ISC-FPB1-W120QS, ISC-FPB1-W200QS. en Installation and Operation Guide Photobeam 5000 ISC-FPB-W60QS, ISC-FPB-W20QS, ISC-FPB-W200QS en Installation and Operation Guide Photobeam 5000 Table of Contents en 3 Table of contents Introduction 4. About documentation 4.2 Bosch Security

More information

4 & 8-POINT ANNUNCIATORS Instruction Manual

4 & 8-POINT ANNUNCIATORS Instruction Manual 4 & 8-POINT ANNUNCIATORS Instruction Manual 8 Field Selectable Sequences All Common ISA Sequences 4 or 8-Point (Channel) Monitoring Free Replaceable Message Labels Type 4X, NEMA 4X, IP65 Front Universal

More information

Firefly II Multi Voltage RELEASE DEVICES. Firefly II & IIB-MV INSTALLATION MANUAL

Firefly II Multi Voltage RELEASE DEVICES. Firefly II & IIB-MV INSTALLATION MANUAL Firefly II Multi Voltage RELEASE DEVICES Firefly II & IIB-MV INSTALLATION MANUAL GENERAL DESCRIPTION: S/N The The Cookson Company Firefly II-MV time delay release devices are designed for use on rolling

More information

Installation, Operating and Maintenance Manual

Installation, Operating and Maintenance Manual STATUS ZONES CONTROLS FIRE FAULT DISABLED FIRE 1 2 3 4 5 6 7 8 TEST FAULT DISABLED 1 5 BUZZER SILENCE RESET 1 2 TEST 2 6 LAMP TEST 3 SUPPLY 3 7 SYSTEM FAULT 4 8 SOUNDERS ACTIVATE/ SILENCE 4 FAULTS INSTRUCTIONS

More information

Non-Contact Safety Switches FF6 Series Issue 4. Sensing and Internet of Things. Datasheet FEATURES DESCRIPTION DIFFERENTIATION

Non-Contact Safety Switches FF6 Series Issue 4. Sensing and Internet of Things. Datasheet FEATURES DESCRIPTION DIFFERENTIATION Sensing and Internet of Things Non-Contact Switches FF6 Series DESCRIPTION Honeywell FF6 Series are magnetically actuated noncontact safety limit switches for use in machine guarding applications, designed

More information

Overfill Prevention Control Unit with Ground Verification & Vehicle Identification Options. TÜVRheinland

Overfill Prevention Control Unit with Ground Verification & Vehicle Identification Options. TÜVRheinland Scully Intellitrol Safety Manual Overfill Prevention Control Unit with Ground Verification & Vehicle Identification Options TÜVRheinland Functional Safety Type Approved FS IEC 61508 Certified SIL 2 / SIL

More information

Inverter control panels........................ 152 Inverter control panels with safety............... 153 Level control panel........................... 155 Temperature control panel.....................

More information

Rack Mount Series Installation Guide

Rack Mount Series Installation Guide Rack Mount Series Installation Guide Models Include: Maximal1RHV Maximal1RV - 12VDC @ 4 amp or 24VDC @ 3 amp. - 12VDC @ 4 amp or 24VDC @ 3 amp. - Eight (8) Fuse Protected Outputs. - Sixteen (16) Fuse Protected

More information

Operating Manual MS220DA

Operating Manual MS220DA ZIEHL industrie elektronik GmbH + Co KG Daimlerstraße 13, D 74523 Schwäbisch Hall + 49 791 504-0, info@ziehl.de, www.ziehl.de Temperature Relays and MINIKA Mains Monitoring Digital Panel Meters MINIPAN

More information

EUROFLAT SERIES TYPES C... S... M...

EUROFLAT SERIES TYPES C... S... M... EUROFLAT SERIES TYPES C... S... M... AUTOMATIC CONTROL SYSTEMS FOR GAS BURNERS AND GAS BURNING APPLIANCES WITH OR WITHOUT FAN APPLICATION The electronic systems of this range are suitable to control gas

More information

GuardShield Safe 2 and Safe 2 PAC Safety Light Curtains User Manual

GuardShield Safe 2 and Safe 2 PAC Safety Light Curtains User Manual GuardShield Safe 2 and Safe 2 PAC Safety Light Curtains User Manual Important User Information Because of the variety of uses for the products described in this publication, those responsible for the application

More information

BSF4-AH80. Flameproof Type Light Curtain Type 4. Globally-compliant flameproof structure. Ample protective height 1,595 mm 62.

BSF4-AH80. Flameproof Type Light Curtain Type 4. Globally-compliant flameproof structure. Ample protective height 1,595 mm 62. 637 PHOTO PHOTO Flameproof Type Curtain Type 4 General terms and conditions... F-7 Related Information Glossary of terms... P.1455~ Sensor selection guide... P.497~ General precautions... P.1458~ Conforming

More information

TTSIM-2 TRACETEK SENSOR INTERFACE MODULE WITH LCD AND RELAY INSTALLATION/OPERATION INSTRUCTIONS

TTSIM-2 TRACETEK SENSOR INTERFACE MODULE WITH LCD AND RELAY INSTALLATION/OPERATION INSTRUCTIONS TTSIM-2 TRACETEK SENSOR INTERFACE MODULE WITH LCD AND RELAY INSTALLATION/OPERATION INSTRUCTIONS GENERAL INFORMATION Please read these instructions and keep them in a safe place. These instructions must

More information

Selection guide...p.457~ SF-C13...P.663~ Glossary of terms... P.1549~ General precautions... P panasonic.net/id/pidsx/global

Selection guide...p.457~ SF-C13...P.663~ Glossary of terms... P.1549~ General precautions... P panasonic.net/id/pidsx/global 597 Flameproof Type Light Curtain Type 4 General terms and conditions... F-3 Related Information guide...p.457~ SF-C13...P.663~ Glossary of terms... P.1549~ General precautions... P.1595 PHOTO PHOTO Certified

More information

SAFETY RELAY APPLICATION

SAFETY RELAY APPLICATION SAFETY RELAY APPLICATION Application manual for YRB-4EML-31S safety relay Designation: Revision: Order No.: SAFETY RELAY APPLICATION 02 / 13.07.2016 605-000-728 This manual is valid for: YRB-4EML-31S from

More information

SLC 220 E/R RFBS

SLC 220 E/R RFBS 26.10.2016 09:10:02h Datasheet SLC 220 E/R0325 30 RFBS Safety light curtains, Safety light grids / Safety light curtains / SLC 220 Protection class IP65 Safety type 2 in accordance with IEC 61496 1 Resolution

More information

XGUARD-10/-5. LASER SCANNERS for industrial doors. User s Guide for product version 0600 and more

XGUARD-10/-5. LASER SCANNERS for industrial doors. User s Guide for product version 0600 and more EN XGUARD-0/-5 LASER SCANNERS for industrial doors XGUARD-0: max. detection range of 9.9 m x 9.9 m XGUARD-5: max. detection range of 5.0 m x 5.0 m User s Guide for product version 0600 and more SAFETY

More information

3500 SERIES CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL

3500 SERIES CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL 3500 SERIES CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL EFFECTIVE JULY 30, 2014 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the event that items specified

More information

GM420. Digital Ground Continuity Relay For AC Systems. Technical Bulletin NAE /

GM420. Digital Ground Continuity Relay For AC Systems. Technical Bulletin NAE / 3 GM20 Digital Ground Continuity Relay For AC Systems Technical Bulletin NAE03230 / 0.20 GM20 Ground continuity monitor For AC systems Description The GM20 monitors the loop resistance of ground conductors

More information

SOLID STATE SECURITIES, INC. THE "SS90" SERIES RELEASE DEVICES MADE IN THE U.S.A. SS90-WPS MODEL A/B INSTALLATION MANUAL

SOLID STATE SECURITIES, INC. THE SS90 SERIES RELEASE DEVICES MADE IN THE U.S.A. SS90-WPS MODEL A/B INSTALLATION MANUAL S S S S S S LISTED L * PATENT PENDING S S 90 OLID TATE ECURITIES, INC SOLID STATE FAIL-SAFE UNIT U 99Y9 RESET RELEASING DEVICE SOLID STATE SECURITIES, INC. THE "SS90" SERIES RELEASE DEVICES MADE IN THE

More information

Wiring Instructions. Single Doors 99 Checkmate Series Use one or Master Unit each door or one or Support unit each door

Wiring Instructions. Single Doors 99 Checkmate Series Use one or Master Unit each door or one or Support unit each door CAUTION Hinge Edge of Door Wiring Instructions Checkmate Series with Single Point Hold-Open Combination Door Closer-Holder and Releasing Device with or without Integral Smoke Detector INSTALLER: LEAVE

More information