Process Instrumentation and Analytics

Transcription

1 More information: Follow us on: SIEMENS AG Process Industries and Drives Östliche Rheinbrückenstraße Karlsruhe GERMANY Subject to change without prior notice 09/14 Article No.: E20001-A250-P780-V DISPO WÜ/53273 WS Printed in Germany Siemens AG 2016 To ensure the secure operation of a plant or machine it is necessary to take additional, suitable preventive action (e.g. cell protection concept) and to integrate the automation and drive components into a state-of-the-art holistic industrial security concept for the entire plant or machine. Please find further information at: The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners. Process Instrumentation and Analytics Best-in-class products for chemical industries siemens.com/sensors/chemicals

2 Putting safety and efficiency at the heart of your operations Toxicity, reactivity, corrosivity, instability are just a few of the everyday hazards faced in the chemicals industry. Add in the business demands on companies, such as tight margins and feedstock cost pressure, and it s obvious why the twin imperatives of safety and efficiency are number one priorities. PIA Life Cycle Portal The PIA Life Cycle Portal is a web-based application for easy and convenient product selection and configuration. Meeting your industry imperatives Partnering with Siemens gives the precision, integration and reliability that you need to control your processes safely as well as efficiently. You get the reassurance of lasting reliability combined with the knowledge that we are also ready with the latest innovation when you need it. You also get a partner who can give you the breadth and depth of solutions across your operations so that you can rely on Siemens for an answer as your needs evolve. Built to meet your needs When you install a Siemens component in your plant, you can do so in the knowledge that it is built to last. You can also be sure of it helping deliver better asset management. Our devices give you the measurement, maintenance and diagnostics functions you need to translate data and alerts into early and effective action. Advanced diagnostics and functions such as self-test, drag indication, partial stroke tests and multiple adjustable limit values are accessible during operation. Safe upper and lower limits for items such as temperatures, pressures, flows or compositions are vital for plant safety and cost control. There can be no margin for error. The variety of conditions in any one plant can be considerable. Different materials, different compound combinations, different toxicities and environmental conditions can all have an effect on the choice of component. Siemens can advise on the most appropriate technology to fit with your different operational contexts and complexity. Built for safety Siemens has for many years maintained a close relationship with NAMUR, the process control technology association in process industries. The association consists entirely of process control users and currently has over 140 member companies. With our expertise in process automation and instrumentation, we support NAMUR and co-operate closely with its working groups. Our devices also meet the explosion-proof standards set by the different regulatory agencies in Europe, North America and Asia, enabling you to choose the right devices for all the different explosion-proof zones in your plant. With our devices, you can also be sure of developing the right safety instrumented system (SIS) to secure a hazardous process and to reduce the risk of an accident, meeting the safety integrity level (SIL) you need to meet international standards IEC and IEC A comprehensive solution And you don t need to look further than Siemens. We not only give you accuracy and reliability of process instrumentation and analytics measurement but also the reassurance of seamless integration with your planning, management control and other systems. As one of the world s leading automation suppliers, Siemens can give you a one stop shop solution for your automation requirements and also integrate that upwards into PCS and MES systems. With Siemens you have the reassurance of best-in-class products and a partner who understands your industry. Discover more in this brochure and at How to get access You can access the PIA Life Cycle Portal around the clock at It offers you active support to find the best solution from the extensive Siemens portfolio of sensors and process analytical products. The portal can be used to see how different solutions can be put to use in process and factory automation. You can choose between several selection options to find the appropriate product solution for your specific requirements: Direct access sends you straight to a specific configuration if you know the product you are seeking Guided selection lets you select the appropriate application, technology or industry and specify the measurement task based on the various relevant parameters for your particular application Advantages at a glance: Convenient product selection support with answers to typical questions A variety of selection possibilities: see the chemical processes and simply select from the recommended process instrumentation and analytics products Project lists for an order enquiry can be quickly created Different possibilities for processing data and information No separate installation needed Product selection for spare parts The latest product data and information for Siemens process instrumentation and analytics Scan to explore the PIA Life Cycle Portal Learn more 3 4

3 Pressure Positioner Pressure measurement Valve Positioner SITRANS P DS III SITRANS P500 SITRANS P280 SIPART PS2 Pressure transmitter for measuring gauge pressure, absolute pressure, differential pressure, flow and level. Advanced pressure transmitter for highest measuring accuracy, ruggedness and user-friendliness. WirelessHART pressure transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio. Span/Range bar ( psi) 0 32 bar (0 464 psi) bar ( psi) Range of stroke 3 to 130 mm (larger strokes on request) Positioner for linear and part-turn actuators. Optional non-contacting sensor for extreme vibrations and remote applications. Housing material Aluminium, stainless steel Aluminium Aluminium Housing material Optionally available with Makrolon, aluminum, stainless steel or flameproof aluminium Communication ma/hart, PROFIBUS PA, FOUNDATION Fieldbus ma/hart WirelessHART Setpoint signal 0 / 4 20 ma with / without HART 7 or PROFIBUS PA 3.02 / Foundation Fieldbus protocol ITK 6.0 with Link Active Schedular (LAS) Function Process temperature -40 C 100 C -40 C 125 C (- 40 F 257 F) -40 C 85 C (-40 F 185 F) Rotary angle range Process pressure max. 700 bar gauge pressure max. 30 bar (PN420) differential pressure max. 32 bar (PN160) differential pressure max. 320 bar gauge pressure Process temperature -30 C C (-22 F F) (other temperature ranges on request) Accuracy % 0.03 % ± 0.25 % of full scale; max. +/ % of sensor s span Max. air bleed in settled state < Nm³/h (0.02 scfm) Watch the SITRANS P video Get to know the team of specialists for all of your requirements: they re the advocates of measurement precision, robustness and usability for 100% dependability under pressure! Watch the SIPART PS2 video Discover the flexible allround positioner for linear and rotary actuators in a slightly different way! Large variety of applications (e.g. feed water applications, gas flow compressed air, ). Applications in hydraulic power units, boiler controls, biogas fermeters, production of chemicals (formaldehyde, etc), applications where stability is critical for the process. Wireless pressure measurement. Control Valves, On/Off Valve, flow control, batch control, safety shut off. Remote mounting capability allows isolation from high temperatures and vibration sources Local display and local programming with push buttons, accessible without opening the enclosure Robust design Advanced communications and predictive maintenance functions enable optimization of maintenance cycles High accuracy and turndown of 1:100 High measuring accuracy and very fast response time Extremely good long-term stability High reliability even under extreme chemical and mechanical loads For aggressive and non-aggressive gases, vapors and liquids Extensive diagnosis and simulation functions which can be used both on site as well as via HART Optional separate replacement of measuring cell and electronics without recalibration Supports the WirelessHART standard for a flexible pressure measurement Enables cost savings on wiring for locations with difficult installation conditions, like in remote areas of plants, and on moving or rotating equipment Device meets IP65 degree of protection Powered by an internal battery and designed for ultralow power consumption Maximum flexibility for any application All in one package: push buttons, display, binary input, diagnostics as standard on every device Easy and fast commissioning Extremely low air consumption Modular extension of modules and spare parts Usable for all environments Internationally certified Preventive maintenance functions (partial stroke test) Functional Safety (SIL 2) Extensive diagnostics package: full stroke test, step response test, multistep response test Scan the QR-code to see the video Scan the QR-code to see the video

4 Flow measurement Electromagnetic Inline ultrasonic SITRANS F M MAG 1100 SITRANS F M MAG 3100 SITRANS F M MAG 5000 / 6000 Electromagnetic flow sensor with stainless steel housing for chemical dosing. Sensor is designed to meet the most common specifications within the chemical and process industries. With its large variety of liners, electrode materials and grounding electrodes as standard it is a perfect fit for any flow application. Span/Range 0 m/s m/s 0 m/s m/s Wetted parts material Ceramic, PFA Neopren, EPDM, PTFE, PFA, Ebonit, Linatex Microprocessor-based transmitter engineered for high performance, easy installation, commissio ning and maintenance. Communication MAG5000: HART, MAG6000: HART, MODBUS RTU Profibus PA/DP, DeviceNet, Foundation Fieldbus Process temperature Ambient temperature: -40 C C (-40 F F) Medium temperature: -30 C C (-22 F F) Ambient temperature -40 C C (-40 F F) Medium temperature -20 C /150 C (-4 F /302 F) Process pressure Operating pressure: Max. 40 bar (max. 580 psi) Max. 40 bar (max. 580 psi) Accuracy 0,2 % ± 1 mm/s 0,4 % ± 1 mm/s (PFA) The MAG 1100 is used in all industries where the corrosion-resistant stainless steel housing and the highly resistant liner and electrodes fit even the most extreme process media. The main applications can be found in: Mixing, filling CIP cleaning Chemical dosing for optimizing treatment processes (e.g. in water treatment plant and pharmaceutical) Compact wafer design meets EN 1092, DIN and ANSI flange standards Corrosion-resistant AISI 316L stainless steel sensor housing IP67/NEMA 4X / 6 enclosure rating Designed for patented in-situ verification of the whole flowmeter using the SENSORPROM fingerprint Easy commissioning, SENSORPROM unit automatically uploads calibration values and settings Volume flow measurement with a minimal electrical conductivity of 5µS/ cm Approvals: ATEX-2GD Zone I, FM CL 1 Div. 2 Ambient temperature: -20 C 50 C (-4 F 122 F) 0.4 %+/- 1mm/s (MAG 5000) 0.4 %+/- 1mm/s (MAG 5000) Flow measurement of conductive media, water/ water reclaim and delivery applications, industrial water treatment, acid flow control, slurries and pastes. Multiple electrode and liner types for complete application flexibility. Short lead time 5: days + transportation Excellent chemical resistance also during high process temperature Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprints Approved for hazardous areas Flow measurement of conductive media, water/ water reclaim and delivery applications, industrial water treatment, acid flow control, slurries. Superior signal resolution for optimal turndown ratio Built-in advanced batch control Comprehensive diagnostic and service menu enhancing troubleshooting and meter verification SENSORPROM technology facilitates easy transmitter setup and replacement with automatically re-programming of any new transmitter without loss of data and accuracy USM II platform enables fitting of add-on bus modules without loss of functionality and all modules can be fitted as true Plug & Play SITRANS F US SONO 3100 / FUS060 SITRANS F US SONO 3300 / FUS060 SITRANS FUE380 Flowmeter system consisting of a SITRANS FUS060 transmitter and SITRANS F US SONO 3100 sensor with O-ring or flange transducers. Flowmeter system consisting of a SITRANS FUS060 transmitter and SITRANS F US SONO 3300 sensor with integrated transducers. Battery- or mains-powered 2-track flowmeter designed for applications on utilities. The SITRANS FUE380 is type-approved as flowmeter in energy metering for custody transfer. Span/Range Qn 28 m3/h m3/h (depending on size) Qn 10 m3/h m3/h (depending on size) Qp 15 m3/h m3/h (depending on size) Wetted parts material Carbon steel sensor and stainless steel transducers (other materials on request) Carbon steel sensor and stainless steel transducers Carbon steel, Bronze (only DN 50 to 80) Communication HART, Profibus PA HART, Profibus PA IrDA optical eye, Modbus RTU Process temperature Process pressure Medium temperature: -20 C C (-4 F F) Operating temperature: -20 C C (-4 F F) Media down to -200 C (-328 F) on request Max. PN40 and CL300 pressure rating. Other pressure rates on request Medium temperature: -10 C 160 C (14 F F) Operating temperature: -40 C C (-40 F F) Max. PN40 and CL300 pressure rating Medium temperature: 2 C C (35.6 F F) MID: min. +15 C (+59 F) Bronze: Up to 150 C (302 F) Operation temperature: 0 C C (32 F F), MID: max. 55 C Max. PN40 Accuracy ±0.5 % of flow rate ±0.5 % of flow rate ±0.5 % of flow rate (depends on approval) Ideal for challenging applications within the petrochemical/hydrocarbon distribution industries. Standard version is delivered as a 2-path sensor with or without flanges; 4 paths are available upon request Available pipe materials carbon steel (stainless steel on request) Comes in sizes from DN 100 to DN 600 (4 to 24 ), other sizes on request Easy exchange of integrated transducers without the need for downtime or process shutdown Designed for remote installation in hazardous as well as non-hazardous environments Ideal for applications with obstacles or impurities in the water in petrochemicals, power engineering and heating/ cooling. Bidirectional measurement Designed for remote installation in hazardous as well as non-hazardous environments Wide product program as the sensor is available in different sizes Offers an attractive price/performance ratio Long time stability Ideal for applications on cooling water/utilities (heating/cooling) water monitoring and remote outstations on chemical facility water treatment plants. Battery-powered up to 6 years Mains-powered with battery back-up High measuring frequency up to 15 Hz/ 0.5 Hz (mains / battery) 2-path measuring principle for optimum accuracy Compact or remote transmitter installation No pressure drop Dynamics range Qi:Qs up to 1:400 Communication: IrDA optical eye via Modbus RTU protocol MID type approved for custody transfer (MI-004) 7 8

5 Flow measurement Coriolis SITRANS FC M C 2 SITRANS FC300 SITRANS F C MASS 6000 SITRANS F C MASS 2100 / SITRANS FC300 SITRANS FC430 SITRANS FC410 With an accuracy better than 0.15 % of the mass flow rate, the meter is recognized for its high accuracy and wide turndown which is parmaount for many applications. Compact coriolis mass flowmeter sensor suitable for flow measurement of all kinds of liquids and gases. The sensor offers superior performance in terms of flow accuracy, turn-down range and density accuracy. Transmitter for coriolis flowmeter for the measurement of mass flow, volume flow, density, temperature and fraction flow. Functions include dosing of liquids and gases. Coriolis mass flowmeters for exact mass flow, volume flow, density and temperature measurements. Complete flowmeter system for a variety of liquid and gas applications. Provides multiparameter and highly accurate measurement of mass flow, density, temperature and fraction. Compact flowmeter system for a variety of applications. Provides multiparameter and highly accurate measurement of mass flow, volume flow, density, and temperature. Span/Range kg/h (standard version) kg/h (hygenic version - for fine chemicals) kg/h (0 to 772 lb/h) Span/Range Wetted parts material 316L stainless steel, enclosure: 304 stainless steel Sensor stainless steel 316L or Hastelloy C22 / Enclosure 316L Wetted parts material stainless steel (AISI 316L), Hastelloy C L stainless steel, enclosure: 304 stainless steel 316L stainless steel, enclosure: 304 stainless steel Housing material IP67 Noryl, anthracite Fiberglass-reinforced polyamide; Option: stainless steel Housing material stainless steel (AISI 316L) Aluminum with corrosion-resistant coating Aluminum with corrosion-resistant coating Communication Modbus, PROFIBUS/PROFINET using ET 200M HART, PROFIBUS PA, PROFIBUS DP, Modbus, DeviceNet, CANopen Communication HART 7.2 Modbus RTU Process temperature -50 C C (-58 F F) -50 C C (-58 F F) Process temperature -50 C 180 C ( 58 F 356 F) -50 C C (-58 F F) -50 C C (-58 F F) Process pressure Max. 100 bar (max psi) Max. 410 bar (max psi) Process pressure Max. 410 bar (max psi) Measuring tubes: Stainless steel up to 100 bar (1450 psi) Hastelloy C22 up to 160 bar (2320 psi) Sensor enclosure rated 20 bar (DN15, DN25), 17 bar (DN50, DN80) Sensor enclosure burst pressure >160 bar (all sizes) Measuring tubes: Stainless steel up to 100 bar (1450 psi) Hastelloy C22 up to 160 bar (2320 psi) Sensor enclosure rated 20 bar (DN15, DN25), 17 bar (DN50, DN80) Sensor enclosure burst pressure >160 bar (all sizes) Accuracy 0.1 % of rate typically 0.1 % of actual mass flow Accuracy 0.1 % of mass flow ± 0.10 % ± 0.10 % Dosing applications, batch control, water treatment, reactor batch ingredient control. Suitable for applications within Explosion Proof/Flameproof environment. Non conductive liquids and gases, dosing, multi-parameter measurement incl. mass flow rate, volume, density, fraction flow and temperature. High accuracy density control applications, chemical dosing and custody transfer, according to OIML R117 (liquids other than water); safety critical applications up to SIL3. Screwed gland: DIN 11851, DIN , ISO 2853, SMS 1145, Clamp connection: DIN 32676, ISO 2852, DIN Hygienic flange: DIN Approvals: 3A, EHEDG Parallel S-tube design and optimal oriented inductive sensors enhance accuracy and turn-down range Rigid enclosure design reduces the influence from pipeline vibration and thermal stress SENSORPROM enables cost efficient installation and commissioning Enhanced safety with superior safe Ex-design EEx em [ib] IIC; DN 40: II 1/2 EEx em [ib] IIC T2-T6, DN 50: II 2G EEx em [ib] IIC T2-T6 Robust stainless steel encapsulation High zero stability, excellent dynamic response to variations of flow Multiparameter outputs, individually configurable to mass flow, volume flow, density, temperature or fraction flow, e.g. Brix or Plato Fast batch mode and short response time with an update rate of 30 Hz SENSORPROM technology automatically configures the transmitter during start-up Accuracy of density measurements better than g/cm 3 Single bended pipe without internal welding seams Maximum pipe wall thickness for optimal service life, corrosion resistance and high pressure resistance Balanced pipe construction for optimal performance Offers high accuracy over a range of flow rates Multi-parameter measurement enables simultaneous monitoring of density leading to higher dosage quality Coriolis technology enables measurement of non-conducting liquids Advanced communications allow access to the multiple measuring parameters being measured Available in compact or remote versions Offers high accuracy over a range of flow rates Multi-parameter measurement enables simultaneous monitoring of density leading to higher dosage quality Coriolis technology enables measurement of non-conducting liquids Advanced Modbus RTU RS-485 communications allow access to the multiple measuring parameters being measured Namur NE132 compliant

6 Flow measurement Span/Range SITRANS FUH1010 (Oil) For hydrocarbon applications. Available in three versions: Standard Volume, Precision Volume and Interface Detector. It demonstrates high-level performance under a wide range of viscosities and is ideal for pipelines carrying multiple products. Measuring range ±12 m/s (±40 ft/s) bidirectional Pipe range DN 6 to DN 9140 (0.25 to 360 ) Wetted parts material Communication Process temperature HART, BACnet MSTP/BACnet IP, Modbus RTU/TCPIP, Ethernet IP, Johnson N2, VT100 RS232 Standard: -40 C 120 C (-40 F 248 F) Optional: -1 C 230 C (30 F 446 F) Process pressure Accuracy Clamp-on ultrasonic ± % at 0.3 m/s (1 ft/s) Calibratable ±0.15 to 0.3 % Flow measurement on hydrocarbon liquids, interface detection, product identification, auto batch control, pig detection etc. Also suitable for larger pipes where installation is not possible for in-line meters and also high pressures as meter is non intrusive. SITRANS FUG1010 Offers a number of advantages for the industry, including tolerance of challenging wet gas conditions. It also measures standard volume flow for fixed gas compositions without needing a separate flow computer. ±30 m/s (±100 ft/s) bidirectional Pipe range DN 50 to DN 1200 (2 up to 48 ) VT100 RS 232 0, HART, BACnet MSTP/BACnet IP, Modbus RTU & TCP/IP, Ethernet IP, Johnson N2, VT100 RS 232 Standard: -40 C 120 C (-40 F 248 F) Optional: -1 C 230 C (30 F 446 F) ±1-2 % of actual volume reading Ideal for natural and process gas applications, including checkmetering, allocation, production, storage and gas fired power station applications. Also suitable for larger pipes where installation is not possible for in-line meters and also high pressures as meter is non intrusive. Curious how ultrasonic flow measurement works? The Siemens ultrasonic flowmeter solution offers best in class performance and dayto-day operation. Virtually no maintenance Sensors have no moving parts and never make contact with the fluid, keeping total cost of ownership low Cost-efficient installation No process alterations or downtime required ideal for existing pipelines and corrosive or high-pressure liquids Why choose a SITRANS F S clamp-on ultrasonic flowmeter? Maximum flexibility Sensors can be mounted on pipe sizes up to 10 m (394 ), covering the widest range of applications The WideBeam advantage High-performance technology produces a stronger signal for increased measurement precision, even with aeration or suspended solids Standard volume Exceptional repeatability is maintained, independent of changes in temperature, density or viscosity Batch interface and product quality diagnostics provided Density and API outputs provided Precision volume Precise measurement with automatic Reynolds Number compensation for temperature and viscosity changes. Interface detection Outputs liquid density and API as a direct replacement for intrusive densitometers Tolerates most wet gas conditions Relay alarms triggered when a change in gas composition is detected Data extraction and analysis through Si-Ware diagnostics tool Resistant to pressure reducing valve noise Accommodates permanent and direct burial installations with optional rugged Hi-Precision Mount enclosure Scan the QR-code to see the video Best-in-class performance and day-to-day operation Market-leading accuracy, high-speed 100 Hz update rate, easy-to-navigate setup wizards and so much siemens.com/fusclampon siemens.com/fusclampon 11 12

7 Level measurement Point level Ultrasonic SITRANS LVL100 / LVL200 Pointek CLS100 Pointek CLS200 Compact and standard vibrating point level switches for high or low levels of liquids and slurries. Compact RF capacitance level switches with configurable output for point level and interface. Span/Range 40 mm 4 m 100 mm (4 inch) Rod: 5.5 m (18 ft) Cable: up to 30 m (98 ft) Wetted parts material Housing material (PBT) 316L, Alloy C22 (2.4602), Alloy C22 (2.4602) enamelled, 316L with ECTFE coating, 316L with PFA coating Aluminium die-casting housing Aluminium die-casting AlSi10Mg, powder-coated basis: Polyester Stainless steel housing, electropolished 316L PPS, PVDF PBT/PC RF capacitance level switches with optional rod/ cable choices and configurable output. PPS, PVDF Epoxy-coated aluminium Communication PROFIBUS PA Span/Range SITRANS LVS100 / LVS200 SITRANS LPS200 SITRANS Probe LU Vibrating point level switches for high or low level detection of dry powder and granular bulk solids. LVS100: 170 mm 4 m LVS200: 165 mm 20 m Wetted parts material Stainless steel 316 L (1.4404) or 304 (1.4301) Stainless steel 304 and 303 ( and ) Rotary paddle switch for point level detection in bulk solids. Detects full, empty or demand conditions on materials such as grain, feed, cement, plastic granulate and wood chips. 10 m (393.7 inches) 12 m (40 ft) Housing material Epoxy-coated aluminum Epoxy-coated aluminum PBT SITRANS Probe LU is a 2-wire loop powered ultrasonic transmitter for level, volume and flow monitoring of liquids in open channels, storage vessels and simple process vessels. PVDF or ETFE Communication HART, PROFIBUS PA Process temperature LVL100: 150 C max. (302 F) LVL200: 250 C max. (482 F) Process pressure LVL100: bar g (-14.5 psi g psi g) LVL200: bar g (-14.5 psi g psi g) Accuracy Repeatability: 0,1 mm Hysteresis approx. 2 mm with vertical installation; switching delay approx. 500 ms Detection of high, low, demand levels in liquids, pump protection, hazardous areas and critical applications up to SIL2 in pipes, reactors, buffer hoppers and tanks. Option for use in confined spaces. Corrosives/aggressives with hastelloy/pfa/ectfe coated probes. Dual seal for applications such as phosgene/phenol. Proven vibrating level switch technology for liquids Compact insertion length of 40 mm (1.57 ) for confined space applications Fault monitoring for corrosion, loss of vibration or line break to the piezo drive SIL 2 qualified for high level and dry run applications NAMUR (IEC ) switch output Second line of defence (dual seal) - 30 C C ( 22 F F) - 40 C C ( 40 F 257 F) Up to 10 bar g (145 psi g) Rod: up to 25 bar g (365 psi g) Cable: up to 10 bar g (145 psi g) Repeatability 1 % Repeatability: 1 % Level and interface detection, overfill protection in pipes, tanks, hoppers. Liquids, slurries, powders, granules, pressurized applications and hazardous areas. Ideal for applications on OEM skids, filling and dosing. Ideal for detecting liquids, solids, slurries, foam and interfaces Unaffected by product build-up on the probe Requires no metal container wall as reference capacitance Simple installation and maintenance No vibrating mechanical components Intrinsically safe versions Solid-state and ma output Ideal for small spaces Level and interface detection, overfill protection in pipes,tanks, hoppers and reactors. Liquids, slurries, powders, granules, pressurized applications, hazardous areas and Functional Safety (SIL) systems. Ideal for detecting liquids, solids, slurries, foam and interfaces in demanding conditions with high pressure and temperature Unaffected by product build-up on the probe Requires no metal container wall as reference capacitance Simple installation and maintenance No vibrating mechanical components Explosion proof with IS probe and borosilicate glass seal Intrinsically safe versions, SIL 2 qualified for overspill protection Relay or solid state output Profibus PA communications Process temperature 150 C max (302 F) -25 C C (-13 F F) -40 C C (-40 F F) Process pressure Max. 10 bar, gauge (145 psi, gauge) 0.5 bar (atomospheric) Accuracy Switching delay 1 sec 0.15 % of range or 6 mm (0.25 ) Detection of high, low, demand levels in solids. PFA Coated probes for aggressives/corrosives. Buffer hoppers, fine chemicals, bulk solid chemicals and solids in liquid interface. Compact design Vibrating level switch for solids will switch at the correct level, even with low-density products Unit is only tip-sensitive, meaning that it will remain reliable even when there is product build-up at the higher part of the sensor. The vibration helps reduce build-up Rotateable enclosure, remote electronics option Self-cleaning fork Extended model up to 20 m NAMUR (IEC ) switch output Point level detection in bulk solids. Detects full, empty or demand conditions on materials such as grain, feed, cement, plastic granulate and wood chips. Can handle bulk densities as low as 15 g/l (2.19 lb/ft³) with the optional hinged vane or 100 g/l (6.25 lb/ft³) with the standard measuring vane High integrity mechanical seal Optional universal power supply Unique friction clutch mechanism, rotatable enclosure Optional paddle for use with low density materials High temperature model and optional extension kit available Optional fail-safe configuration Level, volume or flow monitoring of liquids and slurries in simple applications with low pressure/temperature. Open sumps/tanks, waste chemicals/water. Small vessels, tanks and channels. Continuous level measurement up to 12 m (40 ft) range Easy installation and simple start-up Programming using infrared Intrinsically Safe handheld programmer, SIMATIC PDM or HART Communicator Communication using HART or PROFIBUS PA ETFE or PVDF transducers for chemical compatibility Patented Sonic Intelligence signal processing Extremely high signal-to-noise ratio Auto False-Echo Suppression for fixed obstruction avoidance Level to volume or level to flow conversion

8 Level measurement Radar SITRANS LR250 SITRANS LR560 SITRANS LR260 SITRANS LR200 SITRANS Probe LR 2-wire, 25 GHz pulse radar level transmitter for continuous monitoring of all types of hydrocarbon liquids and slurries. Span/Range 20 m (66 ft) -40 m (131 ft) -100 m (328 ft) 2-wire, 78 GHz FMCW radar level transmitter for continuous monitoring of solids or liquids. Wetted parts material TFM 1600 PTFE lens < 0.8 μ Ra surface finish PEI or PEEK lens 316 L stainless or coated aluminum flange 2-wire, 25 GHz pulse radar level transmitter for continuous monitoring of all types solids, liquids or slurries. 2-wire, 6 GHz pulse radar level transmitter for continuous monitoring of liquids and slurries. 30 m (98 ft) Span/Range 20 m (66 ft) 20 m (66 ft) 2-wire, 6 GHz pulse radar level transmitter for basic continuous monitoring of liquids in storage vessels. 316L stainless steel and PTFE Wetted parts material Stainless steel Polished stainless steel and PFA coated Housing material Aluminum (polyester/epoxy powder coating) 316 L stainless steel Aluminum (polyester/epoxy powder coating) Housing material Stainless steel Communication HART, PROFIBUS PA, or FOUNDATION Fieldbus HART, PROFIBUS PA, or FOUNDATION Fieldbus HART or PROFIBUS PA Communication HART or PROFIBUS PA ma / HART, Modbus, PROFIBUS PA Process temperature -40 C C (-40 F F) at process connection with FKM O-ring) Process pressure Up to 40 bar g (580 psi g), process connection type dependent Up to 3 bar g (43.5 psi g) Up to 3 bar g (43.5 psi g) as standard Up to 40 bar g (580 psi g) via special order -40 C C ( 40 F F) -40 C C (-40 F F) Process temperature -40 C C (-40 F F) -40 C C (-40 F F) Process pressure Up to 40 bar g (580 psi g), process connection type dependent Up to 3 bar g (43.5 psi g) Watch the level measurement video Intelligence. Reliability. Accuracy. Join the evolution of level measurement. See for yourself in the video! Accuracy 3 mm (0.118 inch) 5 mm (0.2 inch) 6 mm (0.23 inch) Accuracy 0.1 % of measuring range or 10 mm +/- the greater of 0.1% of range or 10 mm (0.4 inch) Level monitoring in process and storage tanks including aggressives/corrosives with full TFM 1600 PTFE, solvents, acids, alkalis and intermediates. Sanitary connections for fine chemicals. Level measurement of plastic pellets/powders, bulk solid chemicals in silos up to 100m even in narrow vessels/silos. Level monitoring of liquids and slurries in tanks/reactors, digesters and applications with some agitation/foaming/steaming/condensation. Applications on smaller vessels containing bulk solids, plastics, talcs, fast level changing buffer hoppers. Level monitoring of liquids and slurries in process tanks/reactors, digesters and applications with some agitation/foaming. Level monitoring of liquids and slurries in Simple applications with low pressure/temperature. Open sumps/tanks, waste chemicals/water. Resistant to build-up or vapors through non-contacting microwave technology Available with antenna options: 316L stainless horn, PVDF threaded antenna, and encapsulated horn with TFM 1600 PTFE lens. Encapsulated antenna suitable for environments with extreme corrosion requirements Process Intelligence signal processing ensures fast start up and plugand-play performance without the need for costly commissioning steps. Advanced diagnostics locally on the display or in the control room Resistance to a broad range of chemicals allows for instrumentation standardization throughout the plant SIL 2 option available Current signalling according to NAMUR NE 43 Process Intelligence advanced echo processing for unparalleled performance Easy to install Narrow beam angle Plug-and-play, graphical Quick Start Wizard for easy and fast setup Virtually unaffected by dust or temperature changes Air purge connection included Aimer flange for optimizing readings in the silo cone area Full communication options (Profibus PA/FF/HART) Quick start programming with menu driven programming in graphic/text Resistant to build-up or vapors through non-contacting microwave technology Available with multiple antenna options: horn as standard, process pressure up to 3 bar g; PVDF and flanged encapsulated with TFM 1600 Lens via special order (Product Variance Center (PVC), process pressure up to 40 bar g accordingly. Built-in Process Intelligence prevents interference from the agitators and vessel obstructions commonly found in waste fuel tanks Integrated purge option for solids applications High signal/noice ratio for challening liquid applications HART and PROFIBUS PA options available Intrinsically Safe approvals for hazardous ambient applications Quick start programming with menu driven programming in graphic/text Cost effective solution using either a horn antenna for large openings or a PTFE rod antenna for openings as small as 50 mm (2 ) Low frequency microwave transmitter offering high immunity to build-up, condensation, vapour and steam Process intelligence and Auto False-Echo Suppression HART and PROFIBUS PA options available Simple parameter based programming for easy quick set up Process Intelligence echo processing Hermetically sealed shielded polypropylene rod antenna with threaded process connection Scan the QR-code to see the video

9 Level measurement Guided wave radar SITRANS LG270 SITRANS LG240 SITRANS LG260 SITRANS LG250 SITRANS LC300 MultiRanger 200 HMI Guided wave radar transmitters for level, level/interface, and volume measurement of liquids and slurries. Simple menu driven display offers ease of setup. Guided wave radar transmitters for level, level/interface, and volume measurement of liquids and slurries. Simple menu driven display offers ease of setup. Guided wave radar transmitters for measuring level in medium range solids applications including plastics and cement. Simple menu driven display offers ease of setup. Guided wave radar transmitters for level, level/interface, and volume measurement of liquids and slurries. Inverse frequency shift capacitance level and interface transmitter for extreme and critical process conditions. MultiRanger 200 HMI is a versatile short to medium-range ultrasonic single and multi-vessel monitor/controller for virtualy any application in a wide range of applications. Span/Range 300 mm mm (11.81 inch inch) 300 mm mm (11.81 inch inch) Max. 60 meters Wetted parts material 316L, Alloy C22, or Duplex PFA or 316L 316L Housing material PBT, aluminium, stainless steel PBT, aluminium, stainless steel PBT, aluminium, stainless steel Communication PROFIBUS PA, Foundation Fieldbus, HART 7, Modbus PROFIBUS PA, Foundation Fieldbus, HART 7, Modbus PROFIBUS PA, Foundation Fieldbus, HART 7, Modbus Process temperature -196 C C (-321 F F) - 40 C 150 C (-40 F 302 F) -40 C C (- 40 F F) Process pressure -1 bar 400 bar (-100 kpa kpa) - vessel pressure bar (-100 kpa kpa) - vessel pressure -1 bar +40 bar (-100 kpa kpa) - vessel pressure Accuracy +/- 2 mm +/- 2 mm +/- 2 mm Extreme conditions including high temperature and high pressure applications and cryogenics: harsh applications in chemical, HPI and energy industries i.e. liquified gas tanks, steam boilers and distillation columns, ammonia and chlorine. Advanced Diagnostics for high degree of safety Ease of maintenance through module design and field replaceable and adjustable probe options Perfect solution for wide range of applications from storage to interface with options for extreme pressure and temperature conditions Universally applicable in liquids, interface, slurries and steam applications Highly immune to build-up Steam compensation / low dk Remote Local User Interface mounting SIL2/3 qualified (SIL3 requires homgeneous redundancy) Second line of defence (secondary glass seal) for critical processes Applications with corrosives/aggressives or viscous products. Applications such as acids/alkalis, solvents. Advanced Diagnostics available for high degree of safety Ease of maintenance through module design and field replaceable and adjustable probe options Suitable for extreme conditions (corrosive/aggressives) with PFA coated rod and cable versions Universally applicable in liquids, interface, slurries and solids Highly immune to build-up / replaceable probes/ measures low dk / able to determine dk of application Remote Local User Interface mounting SIL2/3 qualified (SIL3 requires homgeneous redundancy) Second line of defence (secondary glass seal) for critical processes Highly flexible solution for solid material applications. Extremely versatile solutions for storage, inventory, buffer and day hopper/ silos of solid powders,granules and flours such as calcium carbonate, plastic pellets, titanium dioxide and other intermediate products. Advanced Diagnostics available for high degree of safety Rod or cable options (including PA coated) offers reliability in most continuous measurement applications of solid powders and granules Ease of maintenance through module design and field replaceable and adjustable probe options Highly immune to build-up / replaceable probes/ measures low dk / able to determine dk of application Remote Local User Interface mounting SIL2/3 qualified (SIL3 requires homgeneous redundancy) Second line of defence (secondary glass seal) for critical processes Span/Range 300 mm mm (11.81 inch inch) Rod: 0.3 m m (1 ft ft) Cable: 1 m m (3 ft ft) Wetted parts material 316L, Alloy C22, Duplex, or Alloy 400 PFA, Edelstahl W.-Nr /316L, Edelstahl W.-Nr /316L with PFA isolation depending on type Housing material PBT, aluminium, stainless steel Epoxy-coated aluminium Polycarbon Communication PROFIBUS PA, Foundation Fieldbus, HART 7, Modbus 4 ma ma Modbus RTU, Profibus DP Process temperature -40 C C (-40 F F) -50 C C (-58 F F) -200 C C (-328 F F) : special order Process pressure -1 bar +100 bar ( kpa) - vessel pressure Up to 35 bar g (511 psi g) Continuous level measurement up to 15 m (50 ft) range -20 C C (-4 F F) A: accuracy +/- 2 mm +/- the greater of 0.1% of range or 10 mm (0.4 inch) 0.25 % of range or 6 mm (0.24 ) Highly flexible solution for liquid level and interface applications. Extremely versatile solutions for storage, separation of materials or difficult ammonia applications using special coaxial probe, hydrocarbon/water interface. Advanced Diagnostics available for high degree of safety Large range of options offers reliability in most continuous measurement applications Ease of maintenance through module design and field replaceable and adjustable probe options Suitable for extreme pressure and temperature conditions Universally applicable in liquids, interface, slurries and solids Highly immune to build-up / replaceable probes/ measures low dk / able to determine dk of application Remote Local User Interface mounting SIL2/3 qualified (SIL3 requres homgeneous redundancy) Second line of defence (secondary glass seal) for critical processes Basic Level measurement in liquids, slurries and pastes, interface detection even with emulsions (e.g. oil, water), small buffer tanks, day tanks. Patented Active-Shield technology Easy installation through push-button calibration Integrated local display for set up Full-function diagnostics Inverse frequency approach provides high resolution 4-20 ma analog output Current signalling according to NAMUR NE 43 Level, volume or flow monitoring of liquids and slurries in simple applications with low pressure/temperature. Open sumps/tanks, waste chemicals/water. Small vessels tanks and channels. Easy to use HMI display with local four-button programming, menu-driven parametrs, and Wizard support Removable terminal blocks for ease of wiring Digital input for back-up level override from point level device Communication using built-in Modbus RTU via RS 465 Single or dual point level monitoring Auto False-Echo Suppression for fixed obstruction avoidance Differential amplifier transceiver for common mode noise reduction and improved signal-to-noise ratio Level, volume, and flow measurements in open channels, differential control, extended pump control, and alarm functions

10 Weighing Weighing modules Load cell Weighfeeders Stand-alone weighing integrators Stand-alone weighing integrators PLC-based weighing modules SIWAREX Load cells SITRANS WW100 & WW200 Milltronics BW500: Fully featured integrator for use with both belt scales and weighfeeders Milltronics BW500/L: Integrator for use in basic belt scale or weighbelt applications Milltronics SF500: Fully featured integrator for use with solids flowmeters SIWAREX WP231: Weighing module for SIMATIC S or for stand-alone applications SIWAREX WP241: Weighing module for belt scale applications in SIMATIC S or for stand-alone applictions SIWAREX WT231: Weighing terminal which combines touch panel and weighing module in one product SIWAREX WT241:Weighing terminal which combines touch panel and weighing module in one product SIWAREX WP231: Weighing module for SIMATIC S or for stand-alone applications SIWAREX FTA: Calibratable and versatile weighing electronics for SIMATIC S7 and PCS7 SIWAREX FTC: Versatile, flexible weighing module for conveyor scales, loss-in-weight scales and bulk flow meters, integrated in SIMATIC S7/PCS7 SIWAREX U and CS: Versatile and flexible weighing module for level monitoring, platform scales, integrated in SIMATIC S7/PCS7 Multiple ranges of load cells, suitable for almost any application. Light- to medium-duty weighfeeder for process and feed control. Operating with Milltronics BW500 or SIWAREX FTC microprocessorbased integrators, the SITRANS WW100 & WW200 provide indication of flow rate, totalized weight, belt load, and belt speed. Span/Range 1 mv/v... 4 mv/v 1 mv/v... 4 mv/v 1 mv/v... 4 mv/v Span/Range 3 kg t (6,6 lbs ,2 tons) WW100: 0, t/h (100 lbs/h STPH) WW200: 0, t/h (1000 lbs/h STPH) Housing material Polycarbonate Plastic Plastic Material Stainless steel or aluminium Mild steel Communication On-board Modbus, optional PROFIBUS DP, Ethernet IP, Modbus TCP/IP, ProfiNet and DeviceNet SIMATIC bus, Ethernet TCP/IP and Modbus RTU, RS485 4 DI; 4 DO,1 AO (0/ ma) SIMATIC bus RS485 (SIWATOOL) Communication Watch the video SIWAREX in SIMATIC environment Seamless integration for weighing systems on the highest level. Explore continuous connection technology, diagnosis, secure communication via the CPU system and more. Process temperature Process temperature High temperature version up to 250 C available Process pressure Process pressure Accuracy 0.1 % 0.05 % 0.05 % Accuracy High accuracy of 3000d according to OIML R60 +/-0,25 % (WW100) +/-0,5 % (WW200) Milltronics BW500/L integrator for use with weighfeeders; Milltronics SF500 integrator for use with solid flow meter WP231/WT231: Static weighing, batching, dosing, dynamic weighing, loss-in-weight WP241/WT241: Belt scale applications Silo & tank weighing (i.e paint vessels, reactors, plastic pellets/powders, buffer hoppers, bagging machines) Higher capacity feeding/blending Raw materials blending, i.e. fertiliser production Control dry additive feed rates Finished product loading to bagging plants Offer rate, totals, alarms, analogue output and digital communications Differential speed detection with second speed sensor Suitable for belt scale custody approval Automatic zero and electronic span calibration Alarms for rate, load, speed, or diagnostic error Comprehensive weighfeeder control functions PID control, on-line calibration with optional analog I/O card Moisture meter input with optional analog I/O card for calculation of dry weight Comprehensive diagnostic functions, monitoring of limit values High resolution of up to +/- four million parts Measuring rate of 10 ms Flexible connection to all automation systems, which support Modbus RTU Additionally for SIWAREX WT132/WT241: 4 inch TFT widescreen display, touchscreen Intuitive user interface Degree of protection stainless steel housing: IP65 Complete integration of the SIWAREX weighing module into the SIMATIC system platform. Using standard SIMATIC components, it is simple to adapt the weighing system to your individual requirements. Standardized interfaces, totally integrated functions, and uniform tools enable cost-effective configuration SIWAREX WP231 is programmable via the Totally Integrated Automation (TIA) Portal engineering platform Double Bridge version for increased safety available Hermetically sealed, extremely long service life Suitable for use in hazardous areas Smart design mounting devices for simple and safe installation Direct integration into SIMATIC S7 with SIWAREX U, SIWAREX CS, SIWAREX MS or SIWAREX FTA Rugged, durable design for heavy-duty applications, available in open or enclosed construction with a design rate of: Up to 20 tph with WW100 Up to 100 tph with WW200 Fast installation, easy to clean and easy to replace Precise dosing and ratio control of raw material Stand alone integration with BW500 or direct integration into SI- MATIC S7 with the SIWAREX FTC module The BW500 integrator has 2 PID controllers and all communication possibilities for seamless integration in every control system Scan the QR-code to see the video

11 Weighing Temperature s Solids flowmeters Belt scales Temperature measurement SITRANS WF300 Milltronics MSI/MMI SITRANS TO500 Low- to medium-capacity flowmeters for various product sizes, densities, and fluidities. Heavy-duty, high accuracy multiple idler belt scale used for critical process and load-out control. Span/Range up to 300 t/h (330 STPH) up to 400 C (752 F) Housing material Mild steel/ Stainless steel Stainless steel Communication Profibus DP Optical fibre multipoint measurement system to detect temperatures and temperature profiles in confined spaces. Process temperature -40 C C (-40 F F) -40 C C (-40 F F) -180 C C (-292 F F) Process pressure Accuracy ±1 % ±0,5 % or better 0,5 K Monitoring the process/measure grinding/feeding quality Truck loading Applications such as urea prills, potash, plastics The sensing element is mounted outside the process, keeping the maintenance to an absolute minimum Flowrates from 0.2 to 40t/h as standard, larger versions handle flowrates up to 300t/h Typically, installations achieve an accuracy of +/-1% Stand alone integration with SF500 or direct integration into SIMATIC S7 with the SIWAREX FTC module The SF500 integrator has 2 PID controllers and all communication possibilities for seamless integration in every control system Certified conveyor load out Ratio and flow control into the process Inventory monitoring Applications on potash, nitrates and urea in fertiliser production, plastics, sodium carbonates, talcs, polymers Suitable for retrofit to existing conveyor systems offering accuracies to meet the requirements for custody transfer The patented use of parallelogram-style load cells results reaction to vertical forces, ensuring instant response to product loading Stand alone integration with BW500/L or integration into SIMATIC S7 with SIWAREX FTC Detection of temperatures and temperature profiles in applications with limited available space such as tube reactors More reaction space due to reduction of thermowell diameter Diameter of less than 1.2 mm and up to 48 measuring points Precise identification of the temperature profile for process optimization (i. e. identification of hot spots) Easy and cost-effective installation Faster response time thanks to reduction of the air gap between sensor fiber and thermowell SITRANS TH Family SITRANS TF SITRANS TF280 SITRANS TS Series Series of head mounted transmitters for a variety of applications. It measures temperature with a linear output signal. Field transmitter for harsh industrial applications. It measures temperature with a linear output signal. Degree of protection: IP66/IP67/IP68. WirelessHART temperature transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio. Span/Range Programmable within the sensor range, min. 10 K Programmable within the sensor range, min. 10 K Programmable within the sensor range, min. 10 K Housing material Rugged two-chamber enclosure in die-cast aluminium or stainless steel Die-cast aluminium Temperature sensor for a wide range of measuring goals from basic applications to solutions in harsh environments. Programmable within the sensor range, min. 10 K Die-cast aluminium or stainless steel Communication HART, Profibus PA or Foundation Fieldbus HART, Profibus PA or Foundation Fieldbus WirelessHART direct, 4 ma ma, HART, Profibus PA, Foundation Fieldbus Process temperature -200 C C (-328 F F) -200 C C (-328 F F) -200 C +850 C (-328 F F) measuring point connection head: Pt 100 Basic: -30 C C Pt 100 Extended: -196 C C Thermocouple -196 C C (Depends on type of TC) Pressure Depending on process conditions, material, thermowell diameter and lengths: up to 75 bar (type 2 and 3) up to 500 bar (form 4) Accuracy Span <250 C: < 0,25 C Span >250 C: < 0,1 % of span Head mounted transmitter with wide range of applications. High accuracy across entire ambient temperature range Alarm signal for sensor break or short circuit according to NAMUR 43 Compliant with NE 89, NE 21 Explosion protected executions for US, Canada and Europe, China, S. Korea, Brazil, EAC Rugged design, fully potted electronic Span <250 C: < 0,25 C Span >250 C: < 0,1 % of span Field transmitter & Display for applications needing ruggedised local indication. Digital display: local sensing of measured values Test terminals for direct read-out of output signal without breaking the current loop High accuracy across entire ambient temperature range Alarm signal for sensor break or short circuit according to NAMUR 43 Compliant with NE 89, NE 21 Explosion protected versions for US, Canada and Europe, China, S. Korea, Brazil, EAC Span <250 C: < 0,25 C Span >250 C: < 0,1 % of span Wireless temperature measurement Enables cost savings on wiring for locations with difficult installation conditions, with difficult installation conditions (remote areas, moving or rotating equipment) Device meets IP65 degree of protection Powered by an internal battery, designed for ultralow power consumption Class AA, A, B or 1, 2 acc. IEC + transmitter accuracy Measurement in pipes, vessels, boilers, reactors and open tanks/sumps. Exchangeable during operation Wide application range due to modular design Explosions protection as intrinsic safety, flameproof and non sparking device Certificates ATEX, IEC EX, NEPSI, EX EAC, FM and CSA pending With optional local indicator

12 Gas analytics Process protection Process gas chromatography Continuous gas analytics Acoustic sensors Motion sensors MAXUM II Process Gas Chromatograph Extractive - OXYMAT In-situ - SITRANS SL, LDS6 SITRANS AS100 SITRANS WM100 Milltronics MFA 4p and MSP-12 The MAXUM edition II is the most versatile process gas chromatograph used in all sectors of the chemical industry, petrochemicals and refineries. Intuitive on board color touch screen HMI and powerful workstation software supports easy maintenance. Measurement of oxygen, total hydrocarbons, IR- or UV-active gases. The following details depend on component and application details. In-situ gas analyzers for measurement of gas concentrations directly in the process even under extreme conditions. The following details depend on compnent and application details. Acoustic sensor used for solids flow detection. Heavy-duty zero-speed alarm switch. Motion failure alarm controller and probe, highly sensitive single setpoint motion sensor system. Span/Range Freely configurable depending on application 0,5-100 % % Span/Range khz Up to 100 mm (4 ) Up to 100 mm (4 ) Communication MODBUS RTU(RS485), MODBUS over TCP (Ethernet based), Analog Signals 4-20mA USB, Ethernet, Profibus DP/PA Modbus, Profibus DP, ethernet, local user interface (LUI) Communication 0-10V (AS100) 4-20mA (CU 02) 1 SPDT form C relay 2 SPDT form C relays Process temperature Gaseous samples : 121 C (249,8 F) max Liquid Samples : -20 C C (-4 F F) <2000 hpa <1200 C (2192 F) Process temperature -20 C C (-4 F F) Optional: -40 C C (-40 F F) - 40 C C (-40 F F) - 40 C C (40 F F) Process pressure Gaseous samples : 200 kpa Standard, higher pressure optional Liquid samples : Max kpa, recommended 50 kpa kpa 0 C C (32 F F) ambient temperature <5000 hpa Process pressure Accuracy <= +/- 0,5 % of span depending on specific application 0-5 % smallest measuring range 0-1 % smallest measuring range Accuracy Analysis of compositions of multiple chemical components in gaseous and liquid samples in chemical, petrochemical and oil & gas plants. Process control, plant safety monitoring, gas analysis, emission monitoring. Process control and optimization, emission monitoring, measurement in corrosive and toxic gases, quality control. Burst filter bag detection Detection of blockages in pneumatic conveyor systems (i.e. plastic pellets, powders, talcs, polymers ) Ensure that mechanical conveying systems maintain their set speed Motion sensing on tail pulleys, driven pulleys, motor shaft sensing, screw conveyor flights, bucket elevators. Motion sensing on tail pulleys, driven pulleys, motor shaft sensing, screw conveyor flights, bucket elevators. User configurable, from ppb to 100 % Parallel chromatography: Separate complex analytical tasks into simple parallel tasks Cost of ownership: Flexible oven concept results in low con sumption of air and energy Numerous oven configurations permit optimum solutions for almost every application Simultaneous applications: Use one MAXUM edition II to provide the functionality of several GCs Wide range of detectors including TCD, FID, FPD, PDD (modes: HID,PID,ECD) ATEX/CSA Zone1/2 Ex protection Measurements with low concentrations High linearity Small T90 time Compact design, modular concept Easy to use, plug & measure Physically suppressed zero possible Simplified process integration; remote operation and control Measurement possible in highly corrosive sample gases Suitable for measurements under harsh conditions, e.g. with high dust load, in hot, humid, corrosive, explosive, or toxic gases In applications showing strong varying gas compositions Highly selective, i.e. mostly without cross-sensitivities real-time measurement High long-term stability through built-in maintenance-free and process independent reference gas cell no field calibration required Detects and reacts instantly to changes in solids flow to warn of blockages, product absence, or equipment failure such as burst filter bags - Operating with a SITRANS CU02 control unit, the system detects conditions of high flow, low flow or no flow Designed to be mounted on the outside of the pipe without contact to the material Rugged, low maintenance suitable for tough environments Non-contacting design eliminates the need for lubricating, cleaning and part replacement It alarms to minimize spillage, prevent extensive damage or even fire caused by belt slippage at the head pulley and warn against conveyor malfunction. Designed specifically for the primary industries 100 mm sensing range allows detection on machinery with poor tolerances such as bucket elevators The sensor is capable of penetrating stainless steel and detecting a ferrous target behind, which is particularly suited to screw conveyor applications

13 Communication and software WirelessHART Remote displays Software Industrial communication SITRANS AW200 / AW210 SITRANS RD100 / 200 / 300 / 500 SIMATIC PDM SITRANS Library COMOS SITRANS DTM SCALANCE W786 and W788 SCALANCE M876 RUGGEDCOM / SCALANCE X SCALANCE S WirelessHART adapter which allows standard wired HART or 4 20 ma devices to be connected to a WirelessHART network. Ex i and Ex d versions available. The RD family of products are remote displays ranging from the RD100 simple loop powered display to the RD200/300 universal with control and the RD500 offering virtual web display of our instrument data. Universal, vendor-independent tool for the configuration, parameterization, commissioning, diagnostics and maintenance of intelligent field devices and field components. SITRANS Library allows process instruments of the SITRANS and SIPART product families to be easily integrated into the SIMATIC PCS 7 process control system with high quality, efficiency and security. Operating temperature Communication WirelessHART Modbus RTU, Modbus TCP, FTP, WWW, SMTP Integration of field devices into a WirelessHART network for transmission of process values and diagnostic data i.e. of remote devices into the process control system. Up to eight HART devices can be connected in multidrop mode All four HART process variables of every connected device are transmitted without any loss of accuracy Even one ma device without HART can be connected Configurable with standard tools Adapter and field devices powered externally Can be used in hazardous areas Increases transparency in a plant in installations where DCS does not support integrated HART communcation (powered by ma loop, no additional power supply needed) Local and remote monitoring of inventory levels, process and oil and gas applications, provides web access or local display to most types of field instrumentation, including flow, level, pressure, temperature measurement and weighing. Make measurement data visible and accessible from a remote location Compatible with all types of field instruments in varying process conditions Easy to set up and program RD100 offers best in class low voltage drop of 1V SITRANS RD200 includes freely available logging and monitoring software, allowing multiple displays to be monitored from one PC SITRANS RD200 has optional large display with 35 mm (1.2 ) high LED SITRANS RD500 offers web and visualization and alarming of your instrumentation data Configuration, parameterization, commissioning, diagnostics and maintenance of field devices and field components. Server-Client Architecture: Plant-wide access to every field device via web standard browser Process device data can be easily set, changed, checked for plausibility, managed and simulated Monitors selected process values, alarms and status signals of devices online Allows backup parameters and advanced diagnostics The Library offers significant advantages in the life cycle of a plant. Important device functions are available both in the engineering phase and for process control. The visualized device functions are selected exclusively with regard to optimized process control. Reduced engineering overhead when using the SITRANS Library Device-specific function blocks simplify integration of additional device functions Use of the complete engineering convenience of SIMATIC PCS 7 APL (Advanced Process Library)- conform Supports SIMATIC PCS 7 Supported by SIMATIC PCS 7 as of version V8.0 Software solution for the integrated management of plant projects - from engineering and operations to modernization as well as dismantling. COMOS provides a consistent data base from process design through basic and detail engineering to operation and modernization. Consistent and transparent interdisciplinary plant management with object orientation Parallel processing of engineering data with optimized workflows based on working layer technology depicts the actual as-built status of a plant at all times SITRANS DTM provides an easy way for Field Device Tool (FDT)/ Device Type Manager (DTM) users to parameterize Siemens Instruments using international standards. Electronic Device Description (EDD) is a proven way to describe the behavior and functionality of field instruments and other automation components. In response to high requirements for data communication, Industrial Wireless LAN (IWLAN) provides innovations such as deterministic wireless solutions and Industrial Ethernet standard PROFINET. The SCALANCE W780 Access Points and the SCALANCE W740 Client Modules support data rates of up to 450 Mbps, for setting up Industrial Wireless LANs (IWLAN) with 2.4 GHz or 5 GHz. Operating temperature W786: - 40 C C (-40 F F) W788: - 20 C C (-4 F F) for EEC: - 40 C C (-40 F F) IP-Router in SIMATIC S design for the connection to remote networks via public communication infrastructures, i.e. mobile wireless networks. Communication WLAN (IEEE n) Mobile wireless (2-2,5G - GSM, 3G - UMTS, 4G - LTE) SITRANS DTM uses EDDs as the device description and provides the DTM interface to allow the integration of our field instruments into FDT-frame applications. Same look and feel for all Siemens field instruments Support for Quick start wizards and other dialog boxes Quick overview using table and tree views Online and offline configuration Conformity to IEC profiles for HART and Profibus Clear and comfortable presentation of trend curves Export and import of trend values in Excel-format Chemical production (e.g. plant/ field monitoring and control) Setup of plant networks W786: Outdoor applications; W788: Control cabinet and indoor applications The right Access Point for every highend application MIMO technology (Multiple Input, Multiple Output) Degree of protection up to IP65 Wireless real-time communication using PROFINET with PROFIsafe via KEY-PLUG W780 ifeatures RUGGEDCOM products and SCALANCE XP-200 switches provide a level of robustness and reliability that have set the standard for communications networks deployed in harsh environments. Protect devices or Ethernet network segments and the data transmission between them with integrated firewall respectively VPN against unauthorized access. Secure, redundant connection of underlaid networks due to router and firewall redundancy. -20 C C (-4 F F) -40 C C (-40 F F) -20 C C (-4 F F) Mobile wireless connection to pipelines, compressors and pumping stations (e.g. SCADA Pipeline/Telecontrol) VPN IPsec and OpenVPN (as client) Firewall NAT 4 Ports Router, i.e. up to for different sub networks (routing) can be configured with one M876 Ethernet RUGGEDCOM products and SCALANCE XP-200 switches can be found in mission critical networks used in process control and manufacturing automation systems used across multiple industrial sectors. Extreme temperature range Zero-Packet-Loss technology Rapid Spanning Tree Protocol Conformal Coating M12 cabling IP65/67 degree of protection Industrial Ethernet Protection of industrial automation networks Secure remote access Firewall VPN (IPsec) NAT Router DMZ remote-networks ruggedcom 25 26

14 Totally Integrated Automation Plant Lifecycle Management Plant Lifecycle Management System Operations intelligence Management, Planning and Reporting MES Products from the controller level to the field level With Totally Integrated Automation (TIA), Siemens is the only provider of an end-to-end integrated portfolio of products and systems for the automation of the entire production workflow. From the goods-receiving area to the finished goods warehouse. Totally Integrated Automation reduces the comple xity of the automation solution and enables what really counts: the practical combination of optimally coordinated individual components without interface problems. Totally Integrated Automation integrates not only the production process but all parts of the company from the field level to the management level. The result: a perfectly coordinated overall concept that enables higher productivity. Operations, Engineering and Maintenance Simulation Energy management Maintenance Process Control System Automation Controller Industrial Communication Power Supply and Distribution Field Example: SIMATIC PCS 7. The innovative process control system offers numerous options for connecting I/Os as well as for sending and receiving process signals via sensors and actuators. Process instrumentation Process analytics Weighing and dosing Drive Systems Industrial Identification Remote I/O 27 28