Welcome. Welcome to the new Optex Event-Driven CCTV catalogue.

Transcription

1

2 Welcome Welcome to the new Optex Event-Driven CCTV catalogue. Optex is known as one of the world s leading manufacturers of high performance infrared detectors that are reliable and affordable, but for many Optex is a new name in CCTV even though we have been producing Event-Driven CCTV products for many years. In 2001 Optex purchased Security Enclosures Ltd. - famous for its Redwall Range. This is a demonstration of our commitment to becoming a market leader in the Event-Driven CCTV field. Event-Driven CCTV is all about capturing the images that matter and at its heart lies reliable detection, which is what Optex does best, but this catalogue also features an innovative range of cameras and event recorders. We hope that you find the catalogue informative and easy to use and look forward to receiving your feedback on it. 2

3 There are three Optex Event-Driven CCTV brands, all well known for their high performance, stability and reliability. Redwall The Redwall brand comprises the following ranges of products: Redwall medium and long-range PIR detectors Redwatch detector and camera combination Redwide wide-angle detectors MegaRed long-range, dual output detectors Rednet active infrared beams. The rugged construction and reliable operation of Redwall products make them ideal for use as motion detectors in CCTV applications. The Optex Event-Driven CCTV range comprises short-range outdoor detectors and short, medium and long-range photobeams: LX/VX/BX Outdoor PIR Detectors AX/BX Outdoor Photobeams AX Beam Tower Enclosures The WonderTrack brand comprises indoor and outdoor PIR Cameras and a range of image capture devices: DC Detector Cameras WT Event Recorders CONTENTS PIR DETECTORS Introduction 6 Redwall LPR 4010/3020/404 8 Redwide LRP Redwall LRP 100Q 10 MegaRed LRP 180Q 11 VX VX-402REC 13 LX-402/802N 14 BX-80N 15 Redwall WF 4010/3020/404 Redwall WF 100Q 16 Wire-Free Link: WFR 100/WFT Interswitch/Videswitch 18 PIR Accessories 19 PHOTOBEAMS Introduction 20 AX-70T/130T 22 AX-100/200, PLUS/ALPHA 23 AX250/500 PLUS 24 AX-350/650 MkII 25 Rednet RN4 26 AX-BT, AX-WMT 28 BX-100 PLUS 29 DETECTOR CAMERAS Introduction 30 Redwatch 32 DCL DC DC EVENT RECORDERS Introduction 36 WT-100/ WT-300/ APPENDICES PIR Detector coverage patterns 40 Product Finder Alphabetical index by product code 42 REDWALL REDWALL REDWALL REDWALL OPTEX OPTEX OPTEX OPTEX REDWALL REDWALL REDWALL OPTEX OPTEX OPTEX OPTEX REDWALL OPTEX OPTEX REDWALL WONDERTRACK WONDERTRACK WONDERTRACK WONDERTRACK WONDERTRACK 3

4 CAPTURING THE IMAGES THAT MATTER The most common Event-Driven CCTV application is where an external detection system covers a secure area, which is also covered by highspeed domes or pan and tilt units. These camera units have their presets linked to the status of the movement sensors. When an intruder enters the area the alarm activates and the cameras move to the specific pre-sets to capture the event. The sensors can also be used to activate video transmission systems or, with a manned CCTV system, can alert an operator s attention to movement in a specific area. Systems can also incorporate external audio public address speakers. When the detectors activate in a remote monitoring situation the central station operators can broadcast live speech to the remote site warning the trespasser or potential intruders that they are under surveillance, are being recorded for evidence and that the Police have been alerted and are en route. The Event-Driven CCTV concept covers any application where detection is used to trigger monitoring or recording of a specified event. At its simplest this could be a single PIR detector with built-in miniature camera (such as the DC-300 on page 34) outside a doorway. When someone walks up to the door the PIR activates and the image of the person is captured for evidence. 4

5 BENEFITS OF EVENT-DRIVEN CCTV The user decides which events are of interest and it is these events which are then captured. All other events are ignored, saving time and money. Manned guards can be alerted to potential problems as they happen. Central stations can verify that an alarm has been triggered by an intruder and is not a false activation. When there is an event of interest everyone concerned is more likely to take notice and react as they should they have not been de-sensitised by many false alarms. Event-Driven CCTV is preventive in that it can warn off potential intruders before any damage has been done. Reliable detectors are at the heart of Event-Driven CCTV When people think of Event-Driven CCTV they often think of event recorders, transmission products or products that have alarm inputs. But these products are only as good as the alarm inputs they receive. Reliable detection is at the heart of Event-Driven CCTV because only then can the user rest assured that when an alarm activates it is an intruder - not a false activation. RELIABLE DETECTORS SAVE TIME AND MONEY A Security Manager at a large company called me. They were having false alarms per weekend, but when they looked at the video footage of the car park being monitored it was completely empty. Each false alarm was costing them and the total bill was enormous. We simply replaced the external detectors they were using with Optex detectors and the false alarms disappeared. They thought that there must be something wrong because they were getting no activations which was because there were no intruders! They even sent people into the protected area when the alarm was set to make sure that the system was working, which it was. LESS FOOTAGE Security Installer, Birmingham, England In one week a sixteen camera system produces 2,688 hours of images. Frequently the vast majority of these show nothing of any interest at all. Event-Driven CCTV reduces the footage to the events that matter, saving time, reducing the need for large capacity hard disk recorders and reducing the cost of VHS tapes if VCRs are used. 5

6 Optex external PIR detectors are designed to operate as motion sensors for CCTV applications. They can be used to activate video transmission systems, position pan and tilt or dome cameras or with a manned CCTV system simply alert an operator s attention to movement in the coverage area. All detectors in this section are: Single-ended devices they do not require a transmitter and receiver Totally passive they do not emit signals to achieve detection Simple to install and maintain COMPLETE RANGE Optex offers a comprehensive range of external PIR detectors suitable for every type of Event-Driven CCTV application. From short-range wide-angle to long-range narrow-angle you ll find the right sensor for your requirement in this section. RELIABILITY Tests show that Optex detectors are the most reliable on the market today. Don t take our word for it either. Ask distributors which detectors have the lowest return rates; ask central monitoring stations which detectors give them the lowest number of false alarms; ask installers which detectors don t let them down. They ll all tell you Optex. PEACE OF MIND THROUGH PRODUCT EXCELLENCE Peace of mind comes from knowing that when an alarm activates it is a real alarm not a false alarm. As the world s largest manufacturer of infrared security products we know this. Optex detectors contain a number of unique, patented technologies, which combine to give improved performance, including: Double Conductive Shielding helps to reduce the false alarms caused by car headlights and reflected sunlight in particular Patented optical arrays for improved detection of intruders Size judging function discriminates between large and small objects Tri-channel processing reduces the incidence of false alarms 6

7 PIR DETECTORS HOW DO PIR DETECTORS WORK? Passive Infrared (PIR) detection is achieved by monitoring changes of the far infrared levels in the sensor s field of view. All objects emit infrared radiation at or around a wavelength of 10 micron. The sensor activates when a human being moves against a background that has more or less radiation. Effective detectors are able to discriminate between human and other sources of infrared including cars, pets, wild animals, trees, headlights, sunlight and reflections. PIR detectors are truly passive because they do not emit or transmit radiation. They can operate in complete darkness and poor visibility. Care should be taken when mounting detectors to ensure that the fields of view of the detectors match the field of view of the associated cameras to avoid genuine alarms being missed by system operators. PIR detectors will always operate best when the movement is across the fields of view of the detector. Peace of mind comes from knowing that when an alarm activates it is a real alarm not a false alarm. OPTEX REDWALL Optex detectors can be connected to other detection devices in a number of ways, to increase detection levels and reduce false alarms. Pre-alarm Full alarm Optex detectors can be layered to give pre and full alarms. Detectors can be combined with other detection technologies. Here PIR sensors and shock sensors are combined to protect a warehouse wall. By overlapping fields of view, areas that provide instant full alarms can be created while non important areas can be ignored. 7

8 REDWALL LRP 4010/3020/404 MEDIUM-RANGE PIRs Redwall 4010, 3020 and 404 sensors are specifically designed for use in small to medium sized external areas. Their rugged construction and reliable operation make them ideal for use as motion detectors in CCTV applications. The inclusion of dual sensors and processors plus high and medium sensitivity settings results in a full specification sensor for the smaller installation. The all metal housing of the sensors provides a stable environment for the detection electronics. The head adjustments are tamper protected to prevent sensors being re-aligned by unauthorised personnel. Sensors come complete with all fixings. FEATURES IP65 rated OPTIONS COVERAGE Rugged, all metal construction Twin dual sensors Tamper protected Low power consumption Accurate alignment Heated version (add H to product code) Sun/snow shield 24VAC input (add -24 to product code) DIMENSIONS 170 mm 74 mm mm Dimensions vary depending on tilt of head. LRP 4010 Coverage: 40 x 1 LRP 3020 Coverage: 30 x 2 LRP 404 Coverage: 40 x SPECIFICATIONS 8 Double Dual 11-16V DC 2A/ 20A (with heater) -10 C -40 C (with heater) +50 C 500g IP65 Output Form 1C 30V - 1 amp Tamper Form 1B 30V - 1 amp

9 REDWIDE LRP 5030 The Redwide 5030 offers wide-angle detection for large external areas. It is able to achieve this by combining a high grade, gold plated optical array with three dual element pyroelectric sensors. This combination achieves significant coverage with a low potential for false alarms. Designed for use with CCTV, the detector coverage matches popular camera/lens combinations. The sensor can be accurately aligned using the optical viewer provided and stability of detection checked with the LRP 1020 Walktester (optional see page 19). Triple electronic processors Gold coated optics Triple dual element sensors All metal construction Integral mounting bracket Alignment viewer Patented optical array Low power consumption OPTIONS Heated version (add H to product code) Sun/snow shield 24 V AC input (add -24 to product code) FEATURES COVERAGE WIDE-ANGLE PIR DIMENSIONS 212 mm 115 mm mm LRP 5030 Coverage: 50 x 3 Dimensions vary depending on tilt of head. SPECIFICATIONS Pairs 11-16V DC 2A/ 33A (with heater) -10 C -40 C (with heater) +50 C 2Kg IP64 Output Form 1C 30V - 1 amp Tamper Form 1B 30V - 1 amp 9

10 REDWALL LRP 100Q 212 mm LONG-RANGE PIR DIMENSIONS DIMENSIONS 114 mm The Redwall 100Q detector has changed the industry s perception of using passive infrared in outdoor applications. It is simple to install and align and reliable in operation. The use of four elements in a 100 metre detector is unique and underlines our continued commitment to development. Redwall detectors feature an advanced visual alignment system (pictured below). At installation, a small reflex viewer, supplied with each detector, can be plugged into the sensor s front window and provides a view of the area to be protected. This method allows simple and quick alignment of the Redwall detector. The integral mounting bracket allows fixing to wall or pillar and as with all of our products, the unit comes complete with fixings and gaskets. FEATURES OPTIONS Quad element detection Integral mounting bracket Optical alignment (pictured below) Patented optical array Gold coated reflective surfaces Twin processors Low power consumption Heated version (add H to product code) Sun/Snow shield 24 V AC Input (add -24 to product code) COVERAGE LRP 100Q Coverage: 100 x 3m 212 mm Dimensions vary depending on tilt of head. SPECIFICATIONS By looking through the viewfinder of the visual alignment aid, supplied with the LRP-100Q, the installer can see the position of the long-range detection zones. This is used for initial alignment. For fine tuning, use of the LRP1020 Walktester is strongly recommended (see page 19) Quad 11-16V 2A/ -10 C +50 C 2Kg IP64 Output DC 33A -40 C Form 1C (with heater) (with heater) 30V - 1 amp Tamper Form 1B 30V - 1 amp

11 MEGARED LRP 180Q The MegaRed is the world s first dual output external super long-range PIR detector. Ideal for large perimeter installations, the sensor provides separate near and far alarm outputs allowing the sensor to position an intruder in its field of view. When used with pan and tilt or dome cameras, the alarm outputs can be used to automatically position a camera to an area. Wiring to the detector from its controller can be made in two core cable. This two core carries power to the sensor, near and far alarm information and tamper simultaneously. Due to their extended range and narrow fields of view, MegaRed detectors should only be used over flat terrain. The MegaRed features a unique system to minimise cable and installation costs while maximising installation distance between detector and controller. The controller provides three separate relay outputs for near detection, far detection and tamper output and can be situated either at the detector head or in the control centre. The controller can be situated up to 80 away from the sensor SUPER LONG-RANGE PIR COVERAGE m 2m Near Zone Far Zone LRP 180Q Coverage: 180 x Dual zone detection IP66 rated Two core wiring system Rugged construction Low power consumption Mounting bracket included Separate controller included Gold coated optical system OPTIONS Heated version (add H to product code) Sun/snow shield FEATURES DIMENSIONS 280 mm Dimensions vary depending on tilt of head. SPECIFICATIONS 173 mm 140 mm 223 mm 6 Quad 11-16V DC 6A/ 35A (with heater) -10 C -40 C (with heater) +50 C 7Kg IP66 Output 2 x Form 1C 30V - 1 amp Tamper Form 1B 30V - 1 amp 11

12 VX SERIES VX-402 MULTI-STABILISED OUTDOOR PIR The VX Series provides an innovative solution to external area detection. It employs a highly reliable dual detection method, which prevents false activations from small animals and birds. Two discrete detection areas are created and only when an intruder is detected in both areas is an alarm output provided. The VX-402 is ideal for both industrial and domestic installations and can be used to provide triggering into CCTV, lighting or warning systems. For increased flexibility the new VX-402REC (see opposite) allows the installer to record a customised warning message on-site. The volume of the announcement can be increased by wiring a second speaker into the detector. FEATURES COVERAGE Double Conductive Shielding Sensitivity selection switch Detection length adjustment switch Size judging function Selectable NC or NO alarm output Photocell for day and night operation 1 DIMENSIONS Position A Position C 80 mm 82 mm Position B Position D VX-402 Coverage: 12 x mm SPECIFICATIONS When only the lower zone detects a moving object, the unit is not activated When only the upper zone detects a moving object, the unit is not activated When both the upper & lower zones detect a moving object, the unit is activated. 12 Dual 14 zones V DC 2A -20 C +50 C 550g IP54 Output Form 1B open or closed Tamper Form 1B

13 VX SERIES VX-402REC Offering all the features of the VX-402, the VX-402REC provides detector-activated voice announcements. As well as the ability to record any message in any language, with its superior playback settings it enables the right message to be played in every situation. Using the Easy Voice Recording and Voice Warning functions the unit can be programmed to deliver the most suitable voice announcements in the best possible sequence. Once recorded, the two messages can be delivered in one of four different playback sequences as follows: 1. Sequential Playback VX-402 WITH VOICE RECORDING EASY VOICE RECORDING By using either the built-in microphone or external recording equipment such as a PC, the VX-402REC enables two messages of up to eight seconds in length to be recorded. VOICE WARNING FUNCTION 2. Directional Detection Playback VX-402REC 2nd Detector Caution (Message A) Caution (Message A) Warning (Message B) Warning (Message B) Caution (Message A) Caution (Message A) Third Detection First Detection Second Detection Alarm No Alarm When the VX-402REC first detects someone in the area, it delivers a caution message. If someone is detected in the same area a second time within 30 seconds of the first message being given, it is repeated. On a third detection within 30 seconds, the caution message automatically changes into a warning message. 3. Day/Night Message Playback Changes the message automatically in daytime and night-time, for example giving a welcome message in daytime and an alert message at night. When the VX-402REC is used with another detection device such as an outdoor PIR, active photobeam or a magnetic contact, different messages can be set to make double sure intruders are deterred. The caution message is generated at the first detection, and the warning message generated at the second detection. 4. Arm/Disarm Playback Provides a caution alert when the Arm Mode is on, for example when deterrence is intended, and gives a different message when disarmed. EXTERNAL SPEAKER TERMINAL The VX-402REC has a voice output terminal allowing an external 16 ohm loudspeaker to be connected. APPLICATIONS Intruder Prevention: An alarm is activated when an intruder enters the property or prohibited area. Warning Alert: A safety warning is activated. For example when children go near a dangerous area such as a swimming pool. Shop Entrance: A welcome message is given when customers enter premises. SPECIFICATIONS Dual 14 Zones V DC 2A -20 C +50 C 550g IP54 Output Form 1B open or closed Tamper Form 1B 13

14 LX SERIES LX-402/802N OUTDOOR PIR The LX Series is robust, weatherproof and specifically designed for short-range outdoor Event-Driven CCTV applications. The small size and attractive finish ensures that it will blend into even the most sensitive areas. Wide angle and long-range options offer flexibility and advanced features such as sensitivity and range adjustment. A built-in light sensor provides day and night modes and further adds to the flexibility of the LX Series. An ingenious mirror assembly allows the sensor to provide a pet alley configuration, while the inclusion of Optex patented Double Conductive Shielding ensures the sensor is highly resistant to interference from foreign light sources such as the sun and car headlights. FEATURES OPTIONS COVERAGE Double Conductive Shielding Selectable detection patterns (Pet Alley or Multi-level) Area-masking strips (LX-402 only) Sensitivity selection switch Selectable pulse count (test or 2) Day & night modes CA-2C Ceiling-mount bracket CA-1W Multi-angle wall-mount bracket DIMENSIONS LX-402 Coverage: 12 x 1 1 LX 402 LX 802N 74.8 mm 53.5 mm 74.8 mm 57.5 mm LX-802N Coverage: 2 x mm 141 mm SPECIFICATIONS 14 LX zones LX 802N 12 zones V DC 2A -20 C +50 C LX g LX 802N 190g IP54 Output Form C 28VDC - 2 amp Tamper Form B

15 BX SERIES BX-80N The BX-80N has long, narrow detection areas that extend from both its sides. It is specifically designed to be wall-mounted centrally on a building, covering the building perimeter with a multi-layered, horizontal barrier that detects intruders, before they break in, and alerts a CCTV system to the event. To help to reduce false activations the detection range can be adjusted so that detection extends only to the end of the building and the unit also has a size-judging function that helps discriminate between large and small objects within the detection area. The unit is stylishly designed to blend in with any architecture and is simple to install and set up - there being no need to align transmitters and receivers. Variable detection range up to 2 Attractive, slender design OPTIONS Size-judging function to avoid false alarms Audible alarm indicator to deter intruders FEATURES Metal guard - MG-1 - helps to protect the unit from tampering and vandalism COVERAGE BUILDING PERIMETER DETECTOR BX-80N Coverage: (single side) Detection Area (single side) DIMENSIONS 55 mm 68.7 mm Detection Area (single side) Detection Area 2m (single side) mm 83.5 mm SPECIFICATIONS 4 zones 10-28V 3A -20 C +50 C 400g IP55 Output DC 2x Form 1B 28VDC amp Tamper Form 1B 15

16 REDWALL WF 4010/3020/404 ULTRA LOW CURRENT EXTERNAL PIR SENSORS The WF Wire Free versions of the Redwall 3020/4010/402 and 100Q sensors are designed for use where a reliable low current detector is required. WF detectors can be used in conjunction with the Wire-Free Link products opposite, to form a complete radio-linked system for outdoor use. This system is ideal for use with dome and pan and tilt cameras to provide activity inputs to preset alarm positions. Wire-Free units are both simple to install and set-up, using the standard LRP 1020 Walktester device. FEATURES 0.1A consumption All-metal sensor housing High RFI/EMI immunity Dual channel processing Twin dual sensors Tamper-resistant bracket High or medium sensitivity setting WF 100Q ULTRA LOW CURRENT EXTERNAL PIR SENSOR For coverage diagrams please refer to the Redwall LRP 4010/3020/404 and Redwall LRP 100Q earlier in this section. Please note that Wire Free Redwall products are not available with heaters. SPECIFICATIONS 16 WF 4010/3020/404 - please refer to page 8 WF 100Q - please refer to page 10

17 WIRE-FREE LINK WFR 100/WFT 100 The Wire-Free link is designed to transport alarm information from remote outdoor areas to CCTV or alarm receiving devices. The link is able to operate over maximum line of sight (L.O.S) distances of 200 metres. A special test mode allows range testing to be carried out quickly and easily prior to installation. The link is housed in fully weatherproof enclosures to IP66 and comes complete with all parts and accessories. Receivers are able to accept alarm inputs from up to four separate, and individually coded, Redwall Wire-free link transmitters. Outputs from the receiver channels are all Form C clean contacts and allow the link to be used to interface with any alarm or CCTV product. The receiver operates on 12 V DC and consumes 7A, while the transmitter runs on four readily available alkaline D cells. When used with Redwall wire-free detectors, transmitter batteries will operate for up to three years between battery changes. Any device with closing alarm contacts can be used with the link. Radio link applications include sending positioning information from a remote Redwall sensor back to a dome up to 20 away. The dome can then be programmed to automatically position itself to show the cause of the alarm. 3 year battery life Weatherproof housings to IP66 Up to 20 L.O.S range Licence free operation Four channel receiver Coded for security use Set-up and test mode Selectable lock-out timer FEATURES WIRE-FREE TRANSMITTER/RECEIVER TYPICAL INSTALLATION Uses standard D cell batteries REDWALL - WF TRANSMITTERS WFT 100 RECEIVER SPECIFICATIONS REDWALL-WF DETECTOR CHANNEL No.1 CHANNEL No.2 CHANNEL No.3 CHANNEL No.4 12V NOM 11-15V DC 7A -10 C +50 C 500g IP66 RF RECEIVER WFR 100 No.1 No.2 No.3 No.4 RELAY OUTPUTS TRANSMITTER SPECIFICATIONS 6V Internal Battery 0.1AQ 1A on transmission -10 C +50 C 500g IP66 4 x D (Alk) MN 1300 Life up to 3 years 17

18 INTERSWITCH/VIDESWITCH INTERSWITCH LRP 105 LIGHTING CONTROL SYSTEM The Interswitch LRP 105 is designed to provide an interface between low voltage detection systems and 240/110 V AC devices. A 12 V DC/50A output makes it compatible with all Redwall products, including heated versions. Input 240/110V AC SWITCHED OUTPUT 240V AC 110V AC SPECIFICATIONS 12V DC Output 50A Output -10 C VIDESWITCH VIDE VIDEO SWITCHING SYSTEM The Videswitch system is designed to carry alarm information over coaxial cables alongside video signals but without interference to them. The system comprises two modules, each requiring 12V DC. Videswitch modules are truly universal. SPECIFICATIONS The Interswitch monitors a closed loop input and can switch 1200 watts of lighting for an adjustable period of up to 20 minutes. This output is controlled by an on-board light sensor with adjustable light level sensing. A low voltage changeover relay mimics the detector contacts and is ideal for the activation of auxiliary equipment. The Interswitch can also be controlled remotely and used to activate lighting where sites are remotely monitored. FEATURES Interfaces 240/110 V AC to low voltage systems Controls up to 1200 watts of lighting On-board photosensor with remote option Weatherproof housing to IP67 Secondary alarm signal relay Remote Lights ON facility +50 C 1Kg IP67 Output Form 1C 30V - 1 amp H x W x D 75 x 175 x 125 They can be configured to activate from a closed or open circuit input and can provide an open or closed output at the receiving end. The system is bi-directional and can simultaneously provide inputs and outputs at each end. Videswitch is ideal for use in existing video systems, where additional equipment can be added without extra cables. FEATURES Video OUT Down-the-coax switching Duplex operation Local status indication No set up required Reduces cabling VSI (local) Wiring Chart LOCAL VIDEO SIGNALLER INPUT LOCAL OUTPUT (line) existing video cable VSI (line) REMOTE VIDEO SIGNALLER INPUT REMOTE OUTPUT (local) Video IN 18 12V DC 5A per module -10 C +50 C 125g per module Output Form 1C 30V - 1 amp

19 LRP 1020 Walktester Converts amplifier signal into sweeping sound and simplifies alignment of all PIR products. Powered by a single PP9 battery, the Walktester confirms both accurate alignment and stable operation. PIR ACCESSORIES LRP Sun/Snow Shields Sun/Snow shields are available for all Redwall sensors. LRP 103DS Remote light sensor for LRP 105 Interswitch. This product allows the LRP 105 Interswitch to be installed inside a building or enclosure. LRP SCA Bracket for mounting Redwall, Redwide and Redwatch detectors to scaffold poles. LRP Cage The LRP Cage is designed to offer protection to Redwall detectors installed in areas where they may be subject to vandalism. The cage is suitable for use with all sensors in the range, except MegaRed. Visual Alignment Aid A visual alignment device comes with Redwall 100Q and Redwide 5030 detectors. This is designed to save time during set up by providing a view of the area being covered by the sensor. 19

20 PIR DETECTORS COVERAGE PATTERNS To specify the correct equipment for your application, simply select the appropriate coverage pattern and refer to the product page in the catalogue VX-402/402REC Coverage: 12 x See pages See page 8 LRP 3020 Coverage: 30 x 2 LRP 4010 Coverage: 40 x 1 LRP 404 Coverage: 40 x LRP 100Q Coverage: 100 x 3m See page LRP 180Q Coverage: 180 x See page 11

21 LX-402 Coverage: 12 x 1 See page LRP 5030 Coverage: 50 x 3 See page 9 LX-802N Coverage: 2 x 2 See page Detection Area (single side) Detection Area (single side) 10 See page 15 BX-80N Coverage: 12 x 2 Detection Area 2m (single side) m 18 2m

22 Optex (Europe) Ltd. Unit 9, Four Seasons Crescent Sutton, Surrey SM3 9QR United Kingdom Telephone: +44 (0) Fax: +44 (0) Web: