ERGONOMICS STANDARDS AND TEXTS 2
|
|
- Douglas Campbell
- 5 years ago
- Views:
Transcription
1 ERGONOMICS STANDARDS AND TEXTS 2 Generic Guidance 2 Environmental 3 Control Centres and Offices 5 Vehicle Specific 6 Safe Design of Work 6 Workload, Situation Awareness and Reliability 6 Interface Design, Controls and HMI 7 Training and Readiness 8 Communications and Alarm Handling 9 Buildings, Disability and Inclusion 9 Anthropometry and Biomechanics 10 Safety Integrity 11
2 Ergonomics Standards and Texts Generic Guidance ISO 18529: Ergonomics of human- system interaction Human- centred lifecycle process descriptions Defence Standard : Human Factors for Designers of Systems (all parts) MAP HFI Management Guide (formerly STGP 10) [Sea Systems Group] MAP HFI Technical Guide (formerly STGP 11) [Sea Systems Group] US MIL- STD 1472F: Department of Defence Design Criteria Standard: Human Engineering US MIL- STD : Human Engineering Requirements for Military Systems MIL- HDBK- 759: Department of Defence Handbook for Human Engineering Design Guidelines DOD- HDBK- 763F: Human Engineering Procedures Guide LU- G- 217: Good Practice in Human Factors Integration LU : Integration of Human Factors into Systems Development LU : The System Engineering process applied to projects LU1-538: Assurance Human Factors Integration: Implementation in the onshore and offshore industries: HSE 2002; Research Report 001 Network Rail: Incorporating Ergonomics within Engineering Design Projects Railtrack: Ergonomics Engineering Policy HFI Defence Technology Centre: Developing Human Factors Guidance for COTS Equipment Assessment Eurocontrol: The Human Factors Case: Guidance for Human Factors Integration Harold R. Booher (2003): Handbook of Human Systems Integration, John Wiley & Sons GuidEx: Guide for Understanding and Implementing Defence Experimentation
3 Environmental ISO 10551: Ergonomics of the thermal environment (Using subjective judgement scales) ISO 11399: Ergonomics of the thermal environment (Principles in the application of standards) ISO 13731: Ergonomics of the thermal environment (Vocabulary and symbols) ISO 8996: Ergonomics of the thermal environment (Determination of metabolic rate) ISO 7726: Ergonomics of the thermal environment (Instruments for measuring physical quantities) ISO 15265: Ergonomics of the thermal environment (Risk assessment strategy) ISO/ TS13732: Ergonomics of the thermal environment (Part 1: Contact with surfaces Hot) ISO/ TS13732: Ergonomics of the thermal environment (Part 2: Contact with surfaces Moderate) ISO/ TS13732: Ergonomics of the thermal environment (Part 3: Contact with surfaces Cold) ISO 12894: Ergonomics of the thermal environment (Medical supervision in extremes) ISO 7933: Ergonomics of the thermal environment (Analytical determination and interpretation of heat stress) ISO 15743: Ergonomics of the thermal environment (Cold workplaces risk assessment and management) ISO 11079: Ergonomics of the thermal environment (Heat stress when clothed and with local cooling effects) ISO 7730: Ergonomics of the thermal environment (Thermal comfort using PMV and PPD indices) ISO 14415: Ergonomics of the thermal environment (International standards for people with special arrangements) BS EN 12515: Hot environments: Analytical determination and interpretation of thermal stress using calculation of required sweat rate BS EN 13202: Ergonomics of the thermal environment. Temperatures of touchable hot surfaces. Guidance for establishing surface temperature limit values in product standards with the aid of EN 563 ISO 8995: Lighting of indoor work places ISO 8995: Part 3: Lighting requirements for safety and security of outdoor work places BS EN : Light and Lighting: Lighting of work places: Part 1: Indoor work places BS EN : Light and Lighting: Lighting of work places: Part 2: Outdoor work places BS 5266 (1838): Lighting applications: Emergency Lighting BS EN 50172: Emergency escape lighting systems BS 8206: Lighting for buildings: Part 2: Code of practice for daylighting
4 CIE 13.3: Method of measuring and specifying colour rendering of light sources CIE 17.4: International lighting vocabulary CIE 19.2: An analytic model for describing the influence of lighting parameters upon visual performance CIE 40: Calculations for interior lighting basic method CIE 58: Lighting for sports halls CIE 60: Vision and the visual display unit work station CIE 62: Lighting for swimming pools CIE 117: Discomfort glare in interior lighting CIE 129: Guide for lighting of exterior work areas HSE: Noise at Work Regulations 1989 BS 7445: Description and measurement of environmental noise BS 7445: Part 1: Guide to quantities and procedures BS 7445: Part 2: Guide to acquisition of data pertinent to land use BS 7445: Part 3: Guide to application of noise limits ISO 6242: Building construction-expression of users requirements Part 3: Acoustical requirements BS EN ISO 11200: Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions ASTM E Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index BS EN ISO 9921: Ergonomics. Assessment of speech communication HSE: Control of Substances Hazardous to Health Regulations 2002 (COSHH) NORSOK Standard S-002: Working Environment [Petroleum industry] ISO 2631: Mechanical vibration and shock: Evaluation of human exposure to whole body vibration (Parts 1-4) BS 6841: Measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
5 Control Centres and Offices BS 3044: Guide to ergonomics principles in the design and selection of office furniture ISO 11064: Ergonomic design of control centres ISO 11064: Part 1: Principles for the design of control centres ISO 11064: Part 2: Principles for the arrangement of control suites ISO 11064: Part 3: Control room layout ISO 11064: Part 4: Layout and dimensions of workstations ISO 11064: Part 5: Displays and controls ISO 11064: Part 6: Environmental requirements for control rooms ISO 11064: Part 7: Principles for the evaluation of control centres ISO 11064: Part 8: Ergonomic requirements for specific applications ISO 9241: Ergonomic requirements for office work with visual display terminals (VDTs) ISO 9241: Part 1: General introduction; ISO 9241: Part 2: Guidance on task requirements; ISO 9241: Part 3: Visual display requirements; ISO 9241: Part 4: Keyboard requirements; ISO 9241: Part 5: Workstation layout and postural requirements; ISO 9241: Part 6: Environmental requirements; ISO 9241: Part 7: Requirements for display with reflection; ISO 9241: Part 8: Requirements for displayed colours; ISO 9241: Part 9: Requirements for nonkeyboard input devices; ISO 9241: Part 10: Dialogue principles; ISO 9241: Part 11: Guidance on usability; ISO 9241: Part 12: Presentation of information; ISO 9241: Part 13: User guidance; ISO 9241: Part 14: Menu dialogues; ISO 9241: Part 15: Command dialogues; ISO 9241: Part 16: Direct manipulation dialogues; ISO 9241: Part 17: Form-filling dialogues. ISO 6385: Ergonomic principles in the design of work systems HSE: European Community Directive 90/270/EEC (Display Screen Equipment) HSE: Health and Safety (Display Screen Equipment) Regulations 1992 BS IEC 61227: Nuclear power plants. Control rooms. Operator controls BS IEC 61839: Nuclear power plants. Design of control rooms. Functional analysis and assignment
6 Vehicle Specific ISO/TS 14505: Ergonomics of the thermal environment (Vehicles) ISO 15005: Road vehicles: Ergonomic aspects of transport information and control systems (Dialogue management principles and compliance procedures) ISO 15008: Road vehicles: Ergonomic aspects of transport information and control systems (Specifications and test procedures for in-vehicle visual presentation) ISO 17287: Road vehicles: Ergonomic aspects of transport information and control systems (Procedure for assessing suitability for use while driving) ISO/TR 16352: Road vehicles: Ergonomic aspects of transport information and control systems (Warning systems) ISO/TS 16951: Road vehicles: Ergonomic aspects of transport information and control systems (Procedures for determining priority of on-board messages presented to drivers) ISO 15006: Road vehicles: Ergonomic aspects of transport information and control systems (Specifications and compliance procedures for in-vehicle auditory presentation) ISO 26022: Road vehicles: Ergonomic aspects of transport information and control systems (Simulated lane change test to assess in-vehicle secondary task demand) ISO 16673: Road vehicles: Ergonomic aspects of transport information and control systems (Occlusion method to assess visual demand due to the use of in-vehicle systems) Safe Design of Work ISO 6385: Ergonomic principles in the design of work systems BS EN 614-1: Safety of machinery: Ergonomic design principles. Terminology and general principles BS EN 614-2: Safety of machinery: Ergonomic design principles. Interactions between the design of machinery and work tasks. DOE-HDBK DOE Handbook: Human Factors/Ergonomics Handbook for the Design for Ease of Use of Maintenance HSE: Working at Height Regulations 2005 HSE: Safe working in confined spaces Workload, Situation Awareness and Reliability ISO 10075: Ergonomic principles related to mental workload (Parts 3) BS : Reliability of systems, equipment and components. Guide to fault tree analysis BS EN 61025: Fault tree analysis (FTA) NUREG Fault Tree Handbook
7 Interface Design, Controls and HMI ISO 18789: Ergonomics requirements and measurement techniques for electronic visual displays. ISO 9231: Ergonomics of human-system interaction ISO 9241: Part 210: Human-centred design for interactive systems ISO 9241: Part 305: Optical laboratory test methods for electronic visual displays ISO 9241: Part 300: Introduction to electronic visual display requirements ISO 9241: Part 303: Requirements for electronic visual displays ISO 9241: Part 304: User performance test methods for electronic visual displays ISO 9241: Part 310: Visibility, aesthetics and ergonomics of pixel defects ISO 9241: Part 100: Introduction to standards related to software ergonomics ISO 9241: Part 400: Principles and requirements for physical input devices ISO 9241: Part 410: Design criteria for physical input devices ISO 9355: Ergonomic requirements for the design of displays and control actuators. ISO 9355: Part 1: Human interactions with displays and control actuators ISO 9355: Part 2: Displays ISO 9355: Part 3: Control Actuators LU 1-218: Universal Human Computer Interaction ISO 10741: Dialogue interaction cursor control for text editing ISO 11581: Information technology User system interfaces and symbols Icon symbols and functions ISO 11581: Part 1: Icons general ISO 11581: Part 2: Object icons ISO 11581: Part 3: Pointer icons ISO 11581: Part 4: deliberate omission ISO 11581: Part 5: Tool icons ISO 11581: Part 6: Action icons ISO/IEC 24738: Information technology icon symbols and functions for multimedia link attributes ISO 13406: Ergonomic requirements for work with visual displays based on flat panels ISO 13406: Part 1: Introduction [Withdrawn] ISO 13406: Part 2: Ergonomic requirements for flat panel displays [Withdrawn] ISO Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design ISO 7000: Graphical symbols for use on equipment -- Index and synopsis ISO 9241: Ergonomic requirements for office work with visual display terminals (VDTs) [see above] ISO 11064: Ergonomic design of control centres [see above] ISO 14915: Software ergonomics for multimedia user interfaces
8 ISO 14915: Part 1: Design principles and framework ISO 14915: Part 2: Multimedia navigation and control ISO 14915: Part 3: Media selection and combination ISO 20282: Ease of operation of everyday products ISO 20282: Part 1: Design requirements for context of use and user characteristics ISO 20282: Part 2: Test method for walk-up-and-use products ISO 20282: Part 3: Test method for consumer products ISO 20282: Part 4: Test method for the installation of consumer products ISO/TS Ergonomics of human-system interaction Guidance on accessibility for human-computer interfaces [withdrawn] ISO/IEC 18021: Information technology User interfaces for mobile tools for management of database communications in a client-server model. IEC 60073: Basic and safety principles for man-machine interface, marking and identification Coding principles for indicators and actuators BS EN 60445: Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors BS EN 60446: Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours or alphanumerics BS IEC 61227: Nuclear power plants. Control rooms. Operator controls BS EN 13557: Cranes. Controls and control stations NUREG-0700: Human-System Interface Design Review Guidelines Training and Readiness Defence Training Support Materials (DTSM) 1-6 RS/220: Railway Safety: Good practice in training JSP 502: Tri Service Guide to Training Needs Analysis for acquisition projects LU1-503: Operational and customer service training: Establishment, trainer and training material requirements
9 Communications and Alarm Handling EEMUA 191: Alarm Systems: A guide to design, management and procurement EEMUA 201: Process Plant Control Desks Utilising Human-Computer Interfaces - A Guide to Design, Operational and Human Interface Issues BS EN 981: Safety of machinery. System of auditory and visual danger and information signals BS IEC 61839: International BSI Standard. Nuclear power plants. Design of control rooms. Functional analysis and assignment. ISO 11064: Part 5: Displays and controls BS IEC 62241: Worldwide BSI Standard. Nuclear power plants. Main control room. Alarm functions and presentation BS EN 842: Safety of machinery. Visual danger signals. General requirements, design and testing ISO 7731: Ergonomics Danger signals for public and work areas Auditory danger signals BS EN 50132: Alarm Systems: Alarm transmission systems BS EN 50518: Monitoring and alarm receiving centre ISO 9921: Ergonomics Assessment of speech communication HSE Publication: The Management of Alarm Systems, Contact Research Report 166/1998. HSE Guidance on Alarm Management: Buildings, Disability and Inclusion BS 8300: Design of buildings and their approaches to meet the needs of disabled people code of practice Building Regulations Part M 2004: Access to and use of buildings ISO 11199: Walking aids manipulated by both arms: Requirements and test methods ISO 11199: Part 2: Rollators ISO 11199: Part 3: Walking tables ISO 11334: Assistive products for walking manipulated by one arm: Requirements and test methods ISO 11334: Part 1: Elbow crutches BS : Safety signs and colours. Specification for colour and design BS : Graphical symbols and signs. Safety signs, including fire safety signs. Creation and design of graphical symbols for use in safety signs. Requirements BS ISO : Graphical symbols. Safety colours and safety signs. Design principles for safety signs and safety markings
10 Anthropometry and Biomechanics ISO 14738: Safety of machinery: Anthropometric requirements for the design of workstations at machinery BS EN 1005: Safety of machinery. Human Physical Performance. Part 1 - Terms and definitions BS EN 1005: Safety of machinery. Human Physical Performance. Part 2 - Manual handling of machinery and component parts of machinery BS EN 1005: Safety of machinery. Human Physical Performance. Part 3 - Recommended force limits for machinery operation BS EN 1005: Safety of machinery. Human Physical Performance. Part 4 - Evaluation of working postures and movement in relation to machinery BS EN 1005: Safety of machinery. Human Physical Performance. Part 5 - Risk assessment for repetitive handling at high frequency ISO 15535: General requirements for establishing anthropometric databases ISO 15536: Computer manikins and body templates: Part 1 General Requirements EN 547-1: Safety of machinery. Human body measurements. Principles for determining the dimensions required for openings for whole body access to machinery EN 547-2: Safety of machinery. Human body measurements. Principles for determining the dimensions required for access openings EN 547-3: Safety of machinery. Human body measurements. Anthropometric data ISO7250: Basic human body measurement for technological design: ISO7250: Part 1: Body measurement definitions and landmarks ISO7250: Part 2: Statistic summaries of body measurements from individual ISO populations MIL-HDBK-743: Anthropometry of US Military Personnel HSE: Manual Handling Operations Regulations 1992 HSE: Manual Handling Assessment Chart (MAC) HSE: HSG60 - Upper limb disorders in the workplace HSE: Getting to grips with Manual Handling DTI: Strength Data for design safety Phase 1 & Phase 2 HSE: L23 - Manual Handling Operations Regulations 1992 BS ISO : Ergonomics. Manual handling. Lifting and carrying BS ISO : Ergonomics. Manual handling. Pushing and pulling BS ISO : Ergonomics. Manual handling. Handling of low loads at high frequency Assessment methods: Ovako Working Posture Analysis System (OWAS) Assessment methods: Rapid Upper Limb Assessment (RULA) Assessment methods: Rapid Entire Body Assessment (REBA)
11 Safety Integrity BS 9999: Code of practice for fire safety in the design, management and use of buildings ISO 14738: Safety of machinery: Anthropometric requirements for the design of workstations at machinery BS EN : Safety of machinery. Electrical equipment of machines. General requirements ISO 3864: Safety colours and safety signs ISO 6309: Fire protection safety signs BS EN 614: Safety of machinery - Ergonomic principles for the design of machinery (various) BS EN 1005: Safety of machinery. Human physical performance. Terms and definitions BS EN 13861: Safety of machinery: Guidelines for the application of ergonomics in the design of machinery BS EN 349: Safety of Machinery. minimum gaps to avoid crushing parts of the human body BS EN : Safety of machinery. Indication, marking and actuation. Requirements for the location and operation of actuators BS EN 13861: Safety of machinery: Guidelines for the application of ergonomics in the design of machinery BS EN 349: Safety of Machinery. minimum gaps to avoid crushing parts of the human body BS EN : Safety of machinery. Indication, marking and actuation. Requirements for the location and operation of actuators BS EN 13855: Positioning of safeguards with respect to the approach speeds of the human body BS EN 12453: Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods BS EN 12445: Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements BS EN 12604: Industrial, commercial and garage doors and gates. Mechanical aspects. Requirements BS EN ISO 12100: Safety of machinery. General principles for design. Risk assessment and risk reduction BS EN ISO : Safety of machinery. Permanent means of access to machinery. Choice of a fixed means of access between two levels BS EN ISO : Safety of machinery. Permanent means of access to machinery. Working platforms and walkways BS EN ISO : Safety of machinery. Permanent means of access to machinery. Stairways, stepladders and guard-rails BS EN ISO : Safety of machinery. Permanent means of access to machinery. Fixed ladders BS :2000: Stairs, ladders and walkways. Code of practice for the design, construction and maintenance of straight stairs and winders HSE/HSL: Trip Feasibility Study - Report Number HSL/2006/77 INDG401: The work at height regulations
British Standards for Machinery Guarding
British Standards for Machinery Guarding The below provides a list of standards that are relevant to machinery safety. Not all standards are applicable in every case, and there are specific 'Type C' standards
More informationSafexpert compact og Proffesionel
Standardpakker Safexpert compact og Proffesionel Op til 70 % besparelse på anskaffelse af standard pakker. Altid opdateret til nyeste version af standarderne med serviceaftale Version Pris anskaffelse
More informationSafexpert. Standards. Trainings & Seminars. Price list EUR. January 2019
Safexpert Check and Acceptance Assistent Standards Trainings & Seminars Practice seminar for CE Marking Safexpert training course Page 1 Basic Compact Professional Price list EUR Safexpert - packages according
More informationStandard package Safexpert Standard Standard package Safexpert Standard PLUS Small Standard package Safexpert Standard Plus
Safexpert Safexpert Machinery Directive Safexpert Low Voltage Directive Check and Acceptance Assistent Standards Standard package Safexpert Standard Standard package Safexpert Standard PLUS Small Standard
More informationContents of ANSI/AAMI HE75:2009 Page
Contents of ANSI/AAMI HE75:2009 Page Glossary of equivalent standards...xiii Committee representation...xv Acknowledgments...xvi Foreword...xvii Introduction...1 1 Scope...5 1.1 General...5 1.2 Inclusions...5
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60073 Sixth edition 2002-05 Basic and safety principles for man-machine interface, marking and identification Coding principles for indicators and actuators This English-language
More informationNot to be reproduced without the permission of Last date for receipt of BIS or used as a STANDARD comments is: 15 July 2012
For Comments Only Draft Indian Standard Graphic technology -- Safety systems -- Part 1: General requirements ICS 37.100.10 Not to be reproduced without the permission of Last date for receipt of BIS or
More informationISO INTERNATIONAL STANDARD. Fire detection and alarm systems Part 16: Sound system control and indicating equipment
INTERNATIONAL STANDARD ISO 7240-16 First edition 2007-07-01 Fire detection and alarm systems Part 16: Sound system control and indicating equipment Systèmes de détection et d'alarme d'incendie Partie 16:
More information1.25 General ergonomic conditions Updated on: Author Gestor Approved by Sheets Supplements L. Urban ZG VS 7
Author Gestor Approved by Sheets Supplements L. Urban ZG M. Ernstbergerová ZG VS 7 Applies to projects, acceptance of machines and machinery, manual work stations as well as function verification of planned
More informationOn Your Guard. Machine Safety. A Designer's Guide to Machinery Guarding Standards. 12th edition - March 2018
12th edition - March 2018 Machine Safety The UK's leading machine guarding specialist Introduction There is no hiding from the fact that guarding is a crucial element of a machine or production line, yet
More informationISO INTERNATIONAL STANDARD. Mobile elevating work platforms Design, calculations, safety requirements and test methods
INTERNATIONAL STANDARD ISO 16368 Second edition 2010-05-15 Mobile elevating work platforms Design, calculations, safety requirements and test methods Plates-formes élévatrices mobiles de personnel Conception,
More informationOn Your Guard. Machine Guarding. A Designer's Guide to Machinery Guarding Standards. 11th edition - March 2016
11th edition - March 2016 Machine ing The UK's leading machine guarding specialist Introduction There is no hiding from the fact that guarding is a crucial element of a machine or production line, yet
More informationIEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed.
IEC/TC44 20-3-7 IEC/TC44 IEC/TC44 6 TC44 TC44 TC44 TC44 TC44 WD, CD, CDV TC44 一連番号 IEC 60027-:992 (Ed.) (995 corrected and reprinted) Letter symbols to be used in electrical technology Part : General 2
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-2 First edition 2005-03 Mobile and fixed offshore units Electrical installations Part 2: System design IEC 2005 Copyright - all rights reserved No part of this publication
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3864-1 First edition 2002-05-15 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs in workplaces and public areas Symboles graphiques
More informationStandardisation activities in the field of HMI for road vehicles
International Telecommunication Union Standardisation activities in the field of HMI for road vehicles Dr. Christhard Gelau Bundesanstalt für Straßenwesen/Federal Highway Research Institute (BASt) Department
More informationIEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas
IEC NORMAS PUBLICADAS As normas ISO/IEC já estão relacionadas em normas ISO Publicadas IEC/TC 1 - Terminology IEC 60050-161-am5 ed1.0 (2015-02) - Amendment 5 - International Electrotechnical Vocabulary
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-2 Edition 2.0 2012-03 Mobile and fixed offshore units Electrical installations Part 2: System design INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XC ICS 47.020.60
More informationSOUND RECEPTION SYSTEM
STANDARD FOR CERTIFICATION No. 2.9 SOUND RECEPTION SYSTEM APRIL 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous and independent foundation
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC/TS 62443-1-1 Edition 1.0 2009-07 colour inside Industrial communication networks Network and system security Part 1-1: Terminology, concepts and models INTERNATIONAL ELECTROTECHNICAL
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3864-4 First edition 2011-03-15 Graphical symbols Safety colours and safety signs Part 4: Colorimetric and photometric properties of safety sign materials Symboles graphiques
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14656:2006 Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals Safety of machinery - Safety requirements for extrusion presses for steel
More informationPractical Distributed Control Systems (DCS) for Engineers & Technicians. Contents
Practical Distributed Control Systems (DCS) for Engineers & Technicians Contents Chapter 1 Introduction to Computer Based Control Systems 1 1.1 Introduction to computer based measurement and control systems
More informationISO INTERNATIONAL STANDARD. Graphic technology Safety requirements for graphic technology equipment and systems Part 1: General requirements
INTERNATIONAL STANDARD ISO 12643-1 Second edition 2009-12-15 Graphic technology Safety requirements for graphic technology equipment and systems Part 1: General requirements Technologie graphique Exigences
More informationISO INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels
INTERNATIONAL STANDARD ISO 3864-2 First edition 2004-10-15 Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels Symboles graphiques Couleurs de sécurité
More informationDear Customer. Section Old F8 January 2017 Amendment 4. Replace with new title page and document history pages 1 2B
Dear Customer Please find enclosed Amendment 4, effective 14 February 2014, to the Acceptable Solution and Verification Method for Clause F8 Signs of the New Zealand Building Code. THe previous amendment
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 18758-2 First edition 2018-06 Mining and earth-moving machinery Rock drill rigs and rock reinforcement rigs Part 2: Safety requirements Engins d'exploitation minière et de terrassement
More informationArchitectural and Engineering Specification for a Security Management System. StarNet 2
Architectural and Engineering Specification for a Security Management System StarNet 2 Jan 2, 2018 Page 1 of 12 AE-S2-IN-R1-EN-01/18 This document is intended to provide performance specifications and
More informationAS/NZS :2014
AS/NZS 4024.1601:2014 (EN 953:1997 inc A1:2009, IDT) Australian/New Zealand Standard Safety of machinery Part 1601: Design of controls, interlocks and guarding Guards General requirements for the design
More informationSample Safety Inspection Checklist
INSPECTION HEALTH AND CHECKLIST SAFETY COMMITTEES 1 Sample Safety Workplace: Date: Inspected By: Each No answer may indicate a problem. Yes No FLOORS AND WALKWAYS Are walkways and stairways kept clear
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60092-504 Third edition 2001-03 Electrical installations in ships Part 504: Special features Control and instrumentation Installations électriques à bord des navires Partie 504:
More informationStandardization Programme ( ) Building & Construction Standards Committee
Standardization Programme (2012-2013) Building & Construction Standards Committee Projects Title 2012 2013 Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1 EN 12811: 2 EN 197-1:2011
More informationSVENSK STANDARD SS-ISO Grafisk teknik Säkerhetskrav för tryckpressar och tillbehör
SVENSK STANDARD SS-ISO 12648 Fastställd 2003-11-14 Utgåva 1 Grafisk teknik Säkerhetskrav för tryckpressar och tillbehör Graphic technology Safety requirements for printing press systems ICS 37.100.00 Språk:
More informationSection PERIMETER SECURITY SYSTEMS
Section 28 16 43 PERIMETER SECURITY SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Provide and install a perimeter security system as herein specified for the purpose of detecting entry into a designated security
More informationAlarm Management for SCADA control rooms
Whitepaper Alarm Management for SCADA control rooms Definition of the term alarm The concept of alarms (French for a l arme which means spring to arms ) is very old and originates from the military concept
More informationSample Safety Inspection Checklist for Schools
INSPECTION Health and CHECKLIST Safety Committees 1 Sample Safety for Schools School: Date: Inspected By: Each No answer may indicate a problem. Floors and Walkways Are walkways and stairways kept clear
More informationHuman Factors in Design of Control Rooms for Process Industries
CHE 597: Process Safety Management & Analysis Human Factors in Design of Control Rooms for Process Industries Ravi Joshi and Ben Daum December 4 th, 2017 1. Executive Summary Control rooms are essentially
More informationIndicators for Rudder Angle, Rate of Turn, Propeller Shaft Revolution and Propeller Pitch
STANDARD FOR CERTIFICATION No. 2.9 TYPE APPROVAL PROGRAMME NO. 844.40 - MED A1/4.20-4.21-4.22-4.9 Indicators for Rudder Angle, Rate of Turn, Propeller Shaft Revolution and Propeller Pitch FEBRUARY 2012
More informationGuide to Gate Safety Legislation & the Machinery Directive
Guide to Gate Safety Legislation & the Machinery Directive Guide to Gate Safety Legislation & Machinery Directive Gate Safety in the UK market In June 2010 the tragic deaths of 2 young children in separate
More informationOH&S WORKPLACE ASSESSMENT INSPECTION CHECKLIST
OH&S WORKPLACE ASSESSMENT INSPECTION CHECKLIST Organisational Unit / Workplace: Person undertaking inspection: Date inspected: The findings from workplace inspections and safety audits should be submitted
More information18/02/15 (review) Persons who may be affected by the activity (i.e. are at risk)
AREA HEALTH AND SAFETY RISK ASSESSMENT FORM (RA1) Assessment Reference No. Health and Safety- Offices Area or Assessment date 18/02/15 (review) Persons who may be affected by the activity (i.e. are at
More informationISO Clean Version of Revised Working Draft (N 348)
ISO/TC 145/SC 2/WG 1 N 358 Date: 2006-05-29 Source: ISO/TC 145/SC 2/WG 1 Secretariat Project: ISO 23601 Status: 20.20 (WD study initiated) Requested action: for information Distribution: Members of ISO/TC
More informationTECHNICAL REPORT IEC TR 62987
TECHNICAL REPORT IEC TR 62987 Edition 1.0 2015-09 colour inside Nuclear power plants Instrumentation and control systems important to safety Use of Failure Mode and Effects Analysis (FMEA) and related
More informationGuide to Gate Safety Legislation & the Machinery Directive. In Association with:
Guide to Gate Safety Legislation & the Machinery Directive In Association with: Tel: 0845 054 5070 asosafety@egduk.com Guide to Gate Safety Legislation & Machinery Directive Gate Safety in the UK market
More informationISO INTERNATIONAL STANDARD. Safety identification Escape and evacuation plan signs. Identification de sécurité Plans d'évacuation et de secours
INTERNATIONAL STANDARD ISO 23601 First edition 2009-02-15 Safety identification Escape and evacuation plan signs Identification de sécurité Plans d'évacuation et de secours Reference number ISO 23601:2009(E)
More informationTable of Contents PART I: The History and Current Status of the Industrial HMI PART II: Fundamentals of HMI Design and Best Practices
Table of Contents PART I: The History and Current Status of the Industrial HMI We begin with the origin and evolution of the industrial HMI. The positive and negative issues posed by the introduction of
More informationApplicable Standards BS EN ISO 7010: Graphical symbols Safety colours and safety signs Registered safety signs
Applicable Standards BS EN ISO 7010: 2011 Graphical symbols Safety colours and safety signs Registered safety signs BS EN ISO 7010 The reason for change In 2011 BS EN ISO 7010 was introduced throughout
More informationEEMUA E Learning and Publications Catalogue
EEMUA E Learning and Publications Catalogue E learning courses and publications can be purchased online at https://www.eemua.org/shop.aspx Alternatively, please contact EEMUA by telephone +44 (0)20 7488
More informationThe plant meets the requirements of the current FSS 5 Checklist for Vessel Process Plants
FSS 5, Attachment 3: Safety list - Vessel Process Plants (powered devices, machines and facilities - not including industrial trucks) within Freudenberg Date: 2009-03-30 - Revision: 01 I. Nature of the
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7240-19 First edition 2007-08-15 Fire detection and alarm systems Part 19: Design, installation, commissioning and service of sound systems for emergency purposes Systèmes de
More informationONYXWORKS AND FIRSTVISION. Version 4
ONYXWORKS AND FIRSTVISION Version 4 Version 4: Next Generation CONNECTED SOLUTIONS ONYXWorks FirstVision 2 ONYXWORKS Version 4 New to ONYXWorks v4.30 Look Ahead Test Monitoring Configuration Tool Display
More informationSELF PRESERVATION SOCIETY By Jim Creak
SELF PRESERVATION SOCIETY By Editor of the Means of Escape Magazine and Chairman of The Health & Safety Signs Association. w w w. m e a n s - of- e s c a p e. c o m Agenda Regulatory Reform Fire Safety
More informationAS/NZS :2006 Interior and workplace lighting - Part 1: General principles and recommendations
Menu Home About this portal Latest updates Print Save Email Resource detail Citations AS/NZS 1680.1:2006 Interior and workplace lighting - Part 1: General principles and recommendations Table of Contents
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Hazard detection systems and visual aids Performance requirements and tests
INTERNATIONAL STANDARD ISO 16001 First edition 2008-02-15 Earth-moving machinery Hazard detection systems and visual aids Performance requirements and tests Engins de terrassement Dispositifs de détection
More information1. EXPLORE A CAREER PLAN IN DESIGN AND MERCHANDISING
21 st Century Learning Interior Design and Merchandising High School Interior Design and Merchandising is an elective that focuses on creating beauty, comfort and convenience in rooms and homes. The principles
More informationStandoff CWA/TIC Detection. Innovation with Integrity. Toxic Gas/Vapour Threat Mitigation RAPIDplus CBRNE
Standoff CWA/TIC Detection Toxic Gas/Vapour Threat Mitigation RAPIDplus Innovation with Integrity CBRNE Choose Innovation Choose Bruker Toxic Gas Threat Mitigation: RAPIDplus Bruker is recognised as the
More informationThe SLL Lighting Handbook
The SLL Lighting Handbook The Society of Light and Lighting 222 Balham High Road, London SW12 9BS +44(0)20 8675 5211 www.cibse.org CONTENTS PART 1: FUNDAMENTALS Chapter 1: Light 1.1 The nature of light
More informationRemote Monitoring of Offshore Structures using Acoustic Emission.
11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic Remote Monitoring of Offshore Structures using Acoustic Emission. More Info at Open Access Database
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-6 First edition 1999-02 Mobile and fixed offshore units Electrical installations Part 6: Installation Unités mobiles et fixes en mer Installations électriques Partie 6:
More informationCool, calm and collected No cause for alarm on the Grane oil rig
The control room on an offshore oil platform can quickly become a scene of frenzied activity in an emergency: Alarms scream, warning lights blaze and screens flash. Operators are inundated with information.
More informationIntro. of particular standards for IEC : rd edition 14 MARCH 2017
Intro. of particular standards for IEC 61010-1:2010 3 rd edition 14 MARCH 2017 Contents I. List of part 2 standards for IEC 61010-1: 2010 (Third Edition) II. Summary of IEC 61010-2-010:2014 III. Summary
More informationFact File 75. Published Document PD CEN/TS 54-32:2015 Fire detection and fire alarm systems
Fact File 75 Published Document PD CEN/TS 54-32:2015 Fire detection and fire alarm systems Published Document PD CEN/TS 54-32:2015 Fire detection and fire alarm systems INTRODUCTION... 3 BACKGROUND...
More informationDear Customer. Section Old F8 February 2014 Amendments to F8. Replace with new title page and document history pages 1 2B
Dear Customer Please find enclosed Amendment 3, effective 14 February 2014, to the Acceptable Solution and Verification Method for Clause F8 Signs of the New Zealand Building Code. THe previous amendment
More informationPROGRAM OUTCOMES: 1. Design knowledge. 2. Problem analysis. 3. Design/development of solutions. 4. Conduct investigations of complex problems
2.6.1 Program specific outcomes and course outcomes for all programs offered by the institution are stated and displayed on website and communicated to teachers and students. PROGRAM OUTCOMES: 1. Design
More informationInsight a closer look at Classroom safety
Insight a closer look at Classroom safety Education Education Classroom safety contents Introduction 1 The basics 2 Classroom specifics 2 Summary and recommendations 4 Also in the Education range: Bully
More informationThis is a preview - click here to buy the full publication ICS ISBN
IEC 62341-5-2 Edition 2.0 2019-03 REDLINE VERSION colour inside Organic light emitting diode (OLED) displays Part 5-2: Mechanical endurance testing methods INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS
More informationAnnex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-06 according to DIN EN ISO/IEC 17065:2013 Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße 20, 45141 Essen
More informationISO INTERNATIONAL STANDARD. Safety of machinery Laser processing machines Part 1: General safety requirements
INTERNATIONAL STANDARD ISO 11553-1 First edition 2005-02-01 Safety of machinery Laser processing machines Part 1: General safety requirements Sécurité des machines Machines à laser Partie 1: Prescriptions
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60519-1 Third edition 2003-07 Safety in electroheat installations Part 1: General requirements Sécurité dans les installations électrothermiques Partie 1: Exigences générales
More informationGI/GN7520. Guidance on Lighting of Railway Premises. Railway Group Guidance Note
GN Published by Rail Safety and Standards Board Evergreen House 160 Euston Road London NW1 2DX Copyright 2007 Rail Safety and Standards Board Limited GI/GN7520 Issue 1 December 2007 Railway Group Guidance
More informationDentistry Operating lights
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 9680 Third edition 2014-10-15 Dentistry Operating lights Médecine bucco-dentaire Appareils d éclairage Reference number ISO 9680:2014(E) ISO 2014
More informationTHE SAFE USE OF ELECTRICITY
Reference: RCDS 015 THE SAFE USE OF ELECTRICITY Description of Activity Statutory requirements apply to all use and potential use of electricity. This Data Sheet applies to:- 1. All Mains voltage Portable
More informationHMI of the Future with Experion Orion Console and Experion Collaboration Station Andrew Stuart & Annemarie Diepenbroek, Honeywell
1 2014 Honeywell Users Group Europe, Middle East and Africa HMI of the Future with Experion Orion Console and Experion Collaboration Station Andrew Stuart & Annemarie Diepenbroek, Honeywell Challenges
More informationISO 3999 INTERNATIONAL STANDARD. Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests
INTERNATIONAL STANDARD ISO 3999 Second edition 2004-12-15 Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests Radioprotection Appareils pour
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62341-5-2 Edition 2.0 2019-03 colour inside Organic light emitting diode (OLED) displays Part 5-2: Mechanical endurance test methods INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationHuman-centered Design of a Mooring Winch Control Panel DNV GL & IST
Crew-centered Design and Operations of ships and ship systems Human-centered Design of a Winch Control Panel DNV GL & IST winch Control Panels A high variety of s can be found on merchant
More informationLOGIC CONTROLLED DEKO 25 EASE OF USE
DEKO 25 Washer-disinfector WASHROOM SYSTEMS DEKO 25 The DEKO 25 has been designed to bring reliability, outstanding cleaning and disinfection performance and quality into one compact and economic washerdisinfector.
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-1 Fifth edition 2005-11 Low-voltage electrical installations Part 1: Fundamental principles, assessment of general characteristics, definitions This English-language version
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60601-2-13 Third edition 2003-05 Medical electrical equipment Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems Appareils électromédicaux
More informationMobiCall-Client PC Safety at work
MobiCall-Client PC Safety at work MobiCall Client PC offers efficient personal security measures for staff members with PC workstations in threatening situations, as well as a quick alarm transmission
More informationVarious tools (facilities), cleaning equipment and other computing equipment. Washing machines, ZIP taps. TV screens.
Severity Likelihood Factor Girlguiding Risk Assessment Site: HQ Assessment No. GG/HQ/Off Assessor Date of Assessment Task/Activity/Process/Equipment Technical Advisor (if applicable) Persons Name (If Applicable
More informationISO INTERNATIONAL STANDARD. Intelligent transport systems Devices to aid reverse manoeuvres Extendedrange backing aid systems (ERBA)
INTERNATIONAL STANDARD ISO 22840 First edition 2010-04-15 Intelligent transport systems Devices to aid reverse manoeuvres Extendedrange backing aid systems (ERBA) Systèmes intelligents de transport Dispositifs
More informationUniversal Tag Locator. Operations management software for process facilities
Universal Tag Locator Operations management software for process facilities Universal Tag Locator An easy-to-use operations monitoring solution featuring extensive search and reporting capabilities to
More informationAC2000 Security Hub Security and Event Management System
AC2000 Security Hub Security and Event Management System Features that make a difference: Centralised central alarm management application for Access Control, Video, Fire, Intruder and Building Management
More information5.1.1 Manufacturer The date of manufacture, as well as the name and address of the manufacturer, can be combined in one symbol.
BS EN ISO 15223-1: 2012 Medical devices s to be used with medical device labels, labeling and information to be supplied. Part 1: General requirements Title 5.1.1 Manufacturer The date of manufacture,
More informationISO INTERNATIONAL STANDARD. Safety requirements for industrial laundry machinery Part 1: Common requirements
INTERNATIONAL STANDARD ISO 10472-1 First edition 1997-12-15 Safety requirements for industrial laundry machinery Part 1: Common requirements Exigences de sécurité pour les machines de blanchisserie industrielle
More informationFully redundant and customizable alarm, monitoring & Control system
Imtech AMCS Fully redundant and customizable alarm, monitoring & Control system Photo Daniel Ramirez Reliable, stable, safe Imtech AMCS Imtech s new Alarm, Monitoring & Control System is the automation
More informationSTS Directory Accreditation number: STS 0009
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 Mettler-Toledo GmbH ENL Testing Laboratory Heuwinkelstrasse 3 8606 Naenikon SWITZERLAND Head: Bernhard Merk Responsible
More informationNOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
Official Journal of the European Union C 173 English edition Information and Notices Volume 59 13 May 2016 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES European
More informationSession VI Smart safety systems
Session VI Smart safety systems September 09th, 2016 Kolkata Denzil D Enterprise security Building Technologies Siemens Ltd Siemens AG 2011. All rights reserved. Safety every where Hospital Office Residential
More informationIE Code IE Competency Title Credit OAC Ref.
Compulsory Workplace Competency Standards Level Four IE Code IE Competency Title Credit OAC Ref. IE119-4WC Design and draw electrical and electronic drawings including schematics, 4 F5 maintain documentation
More informationExplosion Protection Engineering Principles
Handbook of Fire and Explosion Protection Engineering Principles for Oil, Gas, Chemical and Related Facilities Second edition Dennis P. Nolan ELSEVIER AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD
More informationPERFORMANCE HUMAN NEXT-GENERATION SCADA HIGH. MACHINE INTERFACES Configuring HMIs to Display Operator-centric Information
NEXT-GENERATION SCADA HIGH PERFORMANCE HUMAN MACHINE INTERFACES Configuring HMIs to Display Operator-centric Information Ryan Kowalski, PE; Ed Kowalski, PE 11 September 2017 1 Disclaimers and Notices The
More informationISO NORMAS PUBLICADAS. ISO/IEC TR : Information technology - Future Network - Problem statement and requirements - Part 5: Security.
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC TR 29181-5:2014 - Information technology - Future Network - Problem statement and requirements - Part 5: Security. ISO/IEC TR 29181-2:2014
More informationEffective Alarm Management for Dynamic and Vessel Control Systems
DYNAMIC POSITIONING CONFERENCE October 12-13, 2010 OPERATIONS SESSION Effective Alarm Management for Dynamic and Vessel Control Systems By Steve Savoy Ensco Offshore Company 1. Introduction Marine control
More informationISO INTERNATIONAL STANDARD. Determination of the resistance to jet fires of passive fire protection materials Part 1: General requirements
INTERNATIONAL STANDARD ISO 22899-1 First edition 2007-12-01 Determination of the resistance to jet fires of passive fire protection materials Part 1: General requirements Détermination de la résistance
More informationManual Handling. Safety Talks for Small Business Part 1 of 9
Part 1 of 9 Manual Handling Manual handling can be a potential workplace hazard Repetitive back bending, pulling and lifting from overhead, or forward bending and twisting can result in back injury Understand
More informationWorkplace DESIGN & BUILD MADE SIMPLE 1
Workplace DESIGN & BUILD MADE SIMPLE 1 All aspects of workplace design and construction. Whether it s a desk, a signage, or a finish, everything that makes up your office should be well considered to respond
More informationÜntel is ready for CPR
2016 Üntel is ready for CPR Hakan Kubas Marketing Manager 01.11.2016 Construction Products Regulation What is the CPR? The Construction Products Regulation (CPR) lays down conditions for the placing or
More informationSIMPLIFIED VOYAGE DATA RECORDER (S-VDR)
STANDARD FOR CERTIFICATION No. 2.9 SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) APRIL 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous and
More information