Contents 1. Helpline No. UK/ North Ireland Rep. Ireland , Web Support Model Number: MD

Transcription

1 Wireless Door Chime WARRANTY CARD Congratulations! You have made an excellent choice with the purchase of this quality product. Our commitment to quality also includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults during private use within 36 months of the date of purchase we shall be liable for warranty in accordance with statutory warranty regulations provided that: - The device was not put to use other than the intended - was not overloaded - was not used with the wrong accessories - repairs were not carried out by any other than the intended workshop The warranty certificate is only valid in connection with an acceptable proof of purchase. Please keep both in a safe place. This warranty does not affect your statutory rights. This purchase is guaranteed for a period of three years beginning on the day of purchase. Keep your purchase receipt safe as proof of date of purchase. The guarantee can only be extended for the duration of any repair required. During the warranty period defective devices can be returned to the service address stated on the back cover of this document by first calling the service hotline number provided to arrange collection by an approved freight agent at no cost to you. We will at our discretion, either repair or exchange the device in accordance with warranty legislation. Please enclose the following when sending your product in for repair: 1. Proof of purchase (receipt). 2. This warranty certificate with the fault report from overleaf complete with your name, contact details and fault descrition. If an acceptable proof of purchase is not enclosed the repair will be charged in all cases. After the warranty has expired defective devices can still be sent to the address stated below. Any repairs outside of the warranty period will be charged and can only be undertaken once payment has been received. Ensure that the product is sent well packed as no responsability can be accepted for items lost or damaged in transit. This warranty does not affect your statutory right. 01/11 Wireless Door Chime User's Guide After Sales Support Now you have purchased a Home Protector product you can rest assured in the knowledge that as well as your 3 years part and labour warranty you have the added peace of mind of dedicated helplines and web support costs 7p/min from a BT landline, mobile costs may be higher free phone MD 12213

2 Overview of the device Receiver Transmitter Front & Side Wireless Door Chime FAULT REPORT CARD Name Rear Adress Daytime Tel No Model Number Fail Description 1 LED display 2 Signal selector 3Volume selector 4 Ringer tone button 5 Transmit button 6 Speaker 7 Footplate 8 Hanger eye 9 Battery compartment cover 1 Ringer button 2 Space for name tag 3LED display 4 Opening for fixing screw for attaching the back plate to the transmitter 5 Opening for fixing screws for attaching the back plate to the wall 6 Tabs on the back plate 7 Back plate/battery compartment cover 8 Reset button (inside battery compartment) In order to deal with your enquiry as quickly and efficiently as possible, we ask you to contact our service hotline on the number detailed below. UK IRELAND HELPLINE NO REP. IRELAND HELPLINE NO Alternatively you can contact us via by completing the product support form which can be found on Medion Electronics Ltd. 120 Faraday Park, Faraday Road, Dorcan Swindon SN3 5JF, Wiltshire United Kingdom Hotline: (calls are charged at 7p per min from a standard landline, calls from mobiles could be higher) Fax:

3 Contents 1 02 Introduction 03 General Information 05 Safety Instruction 09 Assembly and Parts List 10 Getting Started 17 Cleaning 18 Disposal 19 Technical Data 20 Declaration of conformity Model Number: MD

4 Introduction 2 Congratulations on choosing to buy a Home Protector product. By doing so you now have the assurance and peace of mind that comes with purchasing a product made by one of Europe s leading manufacturers. All products brought to you by Home Protector are manufactured to the highest standards of performance and safety, and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 3 Year Warranty. Please fill in and return the Warranty Card to the address provided. We hope you will enjoy using your purchase for many years to come. 2 Model Number: MD 12213

5 General Information 3 Please read these instructions carefully before using the system and note the warnings in the operating instructions. If you sell the appliance or give it away, please ensure that you also pass on these instructions. Symbols and key words used in these instructions DANGER! Warning: immediate mortal danger! WARNING! Warning: possible mortal danger and/or serious irreversible injuries CAUTION! Please note the following guidelines to avoid injuries and property damage! ATTENTION! Please note the following guidelines to avoid property damage! Model Number: MD

6 NOTE! Additional information on using the device NOTE! Please note the guidelines in the operating instructions! WARNING! Warning: danger of electric shock 4 Model Number: MD 12213

7 Safety Instructions 4 Dangers for children and people with reduced abilities to operate devices This product is not intended for use by people (including children) with reduced physical, sensory or mental abilities or for those without experience and/or knowledge, unless they are supervised by a person responsible for their safety or they have been instructed on its use. Children should be supervised to ensure they do not play with this device. Children should not be allowed to use this device without supervision. Keep the appliance and its accessories out of reach of children. DANGER! Keep the plastic wrapping out of the reach of children. There is a risk of suffocation. Model Number: MD

8 Proper use Your wireless doorbell is intended to send an acoustic and/or optical signal to the receiver when the doorbell button is activated. Do not attempt to modify the device and do not use it for other purposes. Repairs Never try to open and/or repair the appliances yourself. Contact our Service Centre or other suitable specialist workshop to avoid possible risks. Environmental requirements Transmitter The transmitter has a water resistant housing. In optimum conditions, the transmitter has a range of 100 m. This can be reduced by structural conditions. Sources of interference for the transmitter can include: mounting on metallic objects, reinforced concrete, high-frequency interference of any kind, devices operating on neighbouring frequencies, poorly screened computers. 6 Model Number: MD 12213

9 Receiver Protect the wireless doorbell s receiver from moisture and heat. Avoid placing or mounting the receiver in poorly ventilated areas (such as between shelves or where curtains or furniture can block the vents). Do not allow foreign bodies or liquids to get into the device. Do not expose it to dripping water or spray. Do not place objects that are filled with water, such as vases, on the device. Naked flames such as lit candles must not be placed on the device. Battery information You will need batteries to operate the wireless doorbell. Please note the following advice: Keep batteries away from children. Contact your doctor immediately if a battery is swallowed. Never charge non-rechargeable batteries. Risk of explosion! Never create a short-circuit between the batteries and the connection terminals of the device. Never expose the batteries to excessive heat such as sunlight, fire or similar. Do not dismantle or deform the batteries. Model Number: MD

10 You could injure your hands or fingers or battery fluid could come into contact with your eyes or skin. If this should happen, then rinse the affected areas immediately with a large amount of clean water and contact your doctor immediately. Avoid heavy impacts and vibrations. If necessary, clean the contacts on the battery and appliance before insertion. Always observe the correct polarity. Make sure that the plus (+) and minus (-) poles are correctly inserted to avoid short circuits. Do not mix up new and old batteries or different types of battery. This could cause your appliance to malfunction. In addition, the weaker batteries would discharge too much. Remove spent batteries from the appliance immediately. Remove the batteries from the device if you do not intend to use it for a long period of time. Replace all the old batteries in an appliance with new batteries of the same type. Cover the contacts of the batteries with sticky tape if you want to store or dispose of them. 8 Model Number: MD 12213

11 Assembly and Parts List 5 When unpacking, ensure that the following parts are included: Transmitter 1 x 12 V battery for the transmitter Receiver 2 x AA batteries for the receiver Fittings These operating instructions and guarantee documents Please contact us within 14 days if anything is missing from the package contents. Model Number: MD

12 Getting Started 6 Inserting batteries Transmitter The transmitter requires one 12 V battery, size 23A Remove the battery compartment cover. Insert the battery. Observe correct polarity! The negative pole should be on the spring. Do not replace the battery compartment cover just yet (see Synchronisation, page 12, and Mounting the back plate, page 15). 10 Model Number: MD 12213

13 Receiver The receiver requires two 1.5 V batteries, size AA (L6/LR6). Remove the battery compartment cover. Insert the batteries. Observe correct polarity! The negative poles should each be on the spring. Replace the battery compartment cover. Model Number: MD

14 Synchronisation After inserting new batteries or replacing spent batteries, the transmitter and receiver must be synchronised. Press the transmitter button on the receiver. The receiver s LED lights up red. Then press the reset button inside the battery compartment of the transmitter. The LED on the receiver will then flash a few times. The transmitter and the receiver are now synchronised. 12 Model Number: MD 12213

15 Ringer tone and volume You can set the ringer tone and volume on the receiver and change these settings at any time. Press the ringer tone button repeatedly to select between any one of 16 ringer tones/melodies. Set the volume using the volume control VOL. 1 = low; 3 = high Use the signal selector to choose the type of signal: Ringer tone only Flashing red LED only Ringer tone and flashing red LED Signals when ringing When the ringer button is pressed, the LED on the transmitter lights up briefly. Depending on the settings made with the signal selector, the red LED on the receiver flashes six times and/or a ringer tone or melody is played. Model Number: MD

16 Setting up the receiver If you prefer a free-standing set-up for the receiver, pull out the footplate on the underside of the device. Mounting the receiver You can use the hanger eye on the rear side of the device to mount the receiver on a wall. Drill a hole suitable for a 6 mm wall plug. Insert a wall plug. Screw in one of the large screws but leave the head projecting out. You can now hang the receiver on the screw head. 14 Model Number: MD 12213

17 Mounting the transmitter Find a suitable place by the door for mounting the doorbell. PLEASE NOTE! Before mounting the transmitter, test to see whether the transmitter signal can be picked up by the receiver. Do not mount the transmitter on a metal surface (see the notes on page 6). Mounting the back plate. Remove the battery compartment cover (back plate) from the transmitter. This cover will be attached to the wall as a back plate. Mark the two drill holes on the wall. Drill two holes suitable for 6 mm wall plugs. Model Number: MD

18 Insert the wall plugs. Screw on the back plate using two of the large screws. Ensure that the two tabs are on the left. Mount the transmitter onto the back plate. Screw the back plate to the transmitter using the supplied small screws. Name plate Label one of the supplied name plates. If you decide to label the name plate by hand, we recommend using a pen with waterproof ink. Remove the plastic film from the name plate panel, insert your name plate and replace the film. 16 Model Number: MD 12213

19 Cleaning 7 Clean the receiver with a dry, soft cloth. Use a soft, moist cloth with a little detergent to clean the transmitter. Avoid the use of chemical solutions and cleaning products because these may damage the devices surface or markings. Model Number: MD

20 Disposal 8 Packaging All packaging and packaging materials that are no longer required can and should be recycled. Device Under no circumstances, should any component of the wireless doorbell be disposed of in the normal household rubbish. Seek the advice of your local authority on environmentally friendly disposal facilities. Batteries Do not dispose of used batteries in household rubbish. Batteries should be deposited at a collection point for used batteries. 18 Model Number: MD 12213

21 Technical data 9 Receiver batteries: Transmitter battery: Transmitter splash protector Range: Frequency: 1.5 V, size AA/LR6/R6 12 V, size 23A/8LR932 IPX4 max. 100 m 433 MHz Copyright 2010 All rights reserved. Medion owns the copyright. Subject to technical and optical changes as well as printing errors. Model Number: MD

22 Declaration of conformity 10 The devices comply with the European guidelines for radio equipment and telecommunications installations (Radio Telecommunications Equipment Directive 1999/5/EU). The certificate of conformity is posted on the Internet at: 20 Model Number: MD 12213