Rating. Class I Div II

Transcription

1 TYPE: LED HAZGLOBE : HZ2 LARGE - 26 WATT SPECIFICATIONS. Housing and Lens Frame: Die cast aluminum for thermal management Lens: Tempered Glass Cage: 0.25 dia Wire; 304 stainless steel Finish: TGIC thermoplastic polyester powder coat paint (white, black) Fasteners: Stainless Steel, non-corrosive Weight: 2.5lbs. (Flat mount version) Input Voltage: , 277VAC, Hz Power Factor: >.90 Wiring: Hard wired / Through wire rated Knock-out: 3/4-4 NPT thread Gage NPT L + /-0 turns LED/Ballast Field Replaceable: No Power Consumption: 26 Watts (typical) Driver: Constant current electronic driver Optical System: 9 Cree high intensity LED emitters Lamp Life: 50,000 hours to 70% lumen maintenance UL/IP Rating: UL 598 UL844 listed, Class, Division 2; All Groups; T5 Temperature code Class 2, Division & 2, All Groups, T6 Temperature code Class 3, All fibers and flyings UL wet location listed, NEMA Type 6 compliant Operating Temp Range: -35 C to 45 C Color: White, Black " " 9 4 " 6.75 LED HazGlobe Ordering Guide Model Color Temp Size Rating Mounting Configuration Color LEDGL CRI, 6500K 26 Large Fixture HAZ Hazardous location, 0 Flat Mount WT White 26 Watts Class I Div II 02 Trunnion/Pendant Mount BK Gloss Black

2 LED HAZGLOBE : HZ2 LARGE - 26 WATT TYPE: SPECIFICATIONS. LEDGL HAZ Lumen output: 400 Wattage: 26 Efficacy: 54LpW Beam Spread: 00 o CRI: >75 CCT:6500 K CBCP: 45 Weight: 2.5 lbs. LTL Test Report # Deg. Plane ZONE LUMENS % OF LUMINAIRE Testing was performed in accordance with IES LM in a caliper certified laboratory H (ft) Diameter (ft) FC

3 TYPE: LED HAZGLOBE : HZ2 GLOBE MOUNT BRACKETS SPECIFICATIONS MOUNTING " " 9 4 " FLAT MOUNTING BRACKET FOR 0 FLAT MOUNT GLOBE Aluminum 5052-H thick FASTENER: /4-20 x Stainless Steel Machine Screw Plain Finish 7 6 " " ANGLE MOUNTING BRACKET FOR 0 FLAT MOUNT GLOBE 3 6 " 3 32 " Aluminum 5052-H thick FASTENER: /4-20 x Stainless Steel Machine Screw Plain Finish PENDANT MOUNT " " Aluminum 606 THREAD: 3/4-4 NPT thread Gage NPT L +/-0 turns 3

4 MILITARY TOUGH LED HazGlobe Series Hz and Hz2 High intensity LED luminaire with low power consumption Developed for the US Navy to pass MIL-F-6377 & MIL-DTL-6377 (SSL) UL844 listed, Class, Division 2; Groups A, B, C & D; T5 Corrosion resistant housing to hold up in tough environments Vapor tight, high impact resistant glass lens with stainless steel wire guard Rated life of 50,000 hrs to 70% lumen maintenance LTL tested in accordance with LM-79 standards for electrical and photometric measurements of LED fixtures Cree LEDs tested in accordance with LM-80 standards for measuring lumen maintenance of SSL sources UL wet location listed, NEMA Type 6 compliant Standard 5 year warranty As expected, the housing or casing of the new lighting fixtures were pleasantly resilient against not only inclement weather conditions, but likewise withstood the harsh salt spray environment inflicted by LCAC operations, and did so with outstanding results. In all cases, a simple wipe down of the fixtures was all that was required to have them gleaming with a brilliant shine again. - Commanding Officer, USS PEARL HARBOR (LSD 52) LED HazGlobe fixtures come in 2 convenient sizes and energy packages. Both offer superior high intensity Cree LEDs and have been designed to last longer than any traditional luminaire. Mil-spec LED Lighting now UL certified for the commercial lighting market. 20 Energy Focus, Inc. All Rights Reserved. Energy Focus, Inc. reserves the right to changes specifications for product improvement without prior notice. EFOI04-B

5 Energy Focus products comply with the Buy America Act and are manufactured in the North American Free Trade Zone. SPECIFICATIONS Summary of Class I, II, III Hazardous Locations CLASSES GROUPS DIVISIONS 2 A: Acetylene I Gases, Vapors B: Hydrogen, etc. Not normally present and Liquids C: Ether, etc. Normally explosive in an explosive (NEC Art. 50) D: Hydrocarbons, fuels, and hazardous concentration (but may solvents, etc. accidentally exist) II Dusts (NEC Art. 502) E: Metal dusts (conductive * and explosive) F: Carbon dusts (some are conductive* and all are explosive) G: Flour, starch, grain, combustible plastic or chemical dust (explosive) Ignitable quantities of dust normally are or may be in suspension or conductive dust may be present Dust not normally suspended in an ignitable concentration (but may accidentally exist). Dust layers are present. II Fibers and Flyings (NEC Art. 503) Textiles, woodworking etc. (easily ignitable but not likely to be explosive) Handled or used in manufacturing Store or handled in storage (exclusive of manufacturing) * NOTE: Electrically conductive dusts are dusts with a resistivity less than 05 ohm-centimeter. SOURCE: US Department of Labor; OSHA office LED HazGlobe Ordering Guide Model Color Temp Size Beam Spread Mounting Configuration Color LEDGL CRI, 6500K 5 Small Fixture HAZ Hazardous location, 0 Flat Mount WT White 5 Watts Class I Div II 02 Trunnion/Pendant Mount BK Gloss Black 26 Large Fixture 26 Watts 20 Energy Focus, Inc. All Rights Reserved. Energy Focus, Inc. reserves the right to changes specifications for product improvement without prior notice. EFOI04-B