HYUNDAI HEAVY INDUSTRIES CO., LTD.

Transcription

1 Certificate No.: AE-KOR-RvA Initial Certification Date: 07 March, 1997 Valid: 16 March, March, 2018 This is to certify that the management system of CO., LTD. 1000, Bangeojinsunhwando-ro, Dong-gu, Ulsan, Korea and the sites as mentioned in the Appendix accompanying this Certificate has been found to conform to environmental management system standard(s): ISO 14001:2004, KS I ISO 14001:2009 This certificate is valid for the following Scope: Design, Research & Development, Manufacture and Construction of Various Products of Shipbuilding, Offshore & Engineering, Industrial Plant & Engineering, Engine & Machinery, Electro Electric Systems, Green Energy, Construction Equipment including Administration & Assistance and Construction Management. Place and date: Seoul 06 March, 2015 For the issuing office: DNV GL - Business Assurance 18th Floor, Kyobo Building, 1, Jongro, Jongno-gu, Seoul, Republic of Korea. Tel. : In Kyoon Ahn Management Representative Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB Barendrecht, The Netherlands. Tel.:

2 Certificate No.: AE-KOR-RvA Place and date: Seoul 06 March, 2015 Appendix I to Certificate CO., LTD. Locations included in the certification are as follows: Site Name Site Address Site Scope CO., LTD. H/Q CO., LTD. Offshore & Engineering yard 1000, Bangeojinsunhwando-ro, Donggu, Ulsan, Korea 400, Bangeojinsunhwando-ro, Dong-gu, Ulsan, Korea Design, Research & Development, Manufacture and Construction of Various Products of Shipbuilding, Offshore & Engineering, Industrial Plant & Engineering, Engine & Machinery, Electro Electric Systems, Green Energy, Construction Equipment including Administration & Assistance and Construction Management. Design & Development, Manufacture and Construction of Offshore & Engineering. CO., LTD. Seonam Factory 223, Sapyeong-ro, Nam-gu, Ulsan, Korea Manufacture of Electro Electric Systems. CO., LTD. Yongyeon Yard 800, Cheoyong-ro, Nam-gu, Ulsan, Korea Design & Development, Manufacture of Various Products of Shipbuilding. CO., LTD. Onsan Yard 72, Yeonja-ro, Onsan-eup, Ulju-gun, Ulsan, Korea Manufacture of Offshore & Engineering. CO., LTD. Pipe Fabrication Shop 50, Yeongji-ro, Oedong-eup, Gyeongjusi, Gyeongsangbuk-do, Korea Manufacture of Offshore & Engineering. CO., LTD. Pipe Painting Shop , Naeoe-ro, Oedong-eup, Gyeongju-si, Gyeongsangbuk-do, Korea Manufacture of Offshore & Engineering Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB Barendrecht, The Netherlands. Tel.: Page 1 of 2

3 Certificate No.: AE-KOR-RvA Place and date: Seoul 06 March, 2015 CO., LTD. Gunsan Yard 625, Seohae-ro, Gunsan-si, Jeollabukdo, Korea Design & Development, Manufacture and Construction of Various Products of Shipbuilding. CO., LTD. Gunsan Rotating Machinery Factory and Wind Turbine Factory 232, Dongjangsan-ro, Gunsan-si, Jeollabuk-do, Korea Design & Development, Manufacture and Construction of Rotating Machinery Factory and Wind Turbine. CO., LTD. Solar Energy Factory 313, Soi-ro, Soi-myeon, Eumseong-gun, Chungcheongbuk-do, Korea Design & Development, Manufacture of Solar energy product. Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB Barendrecht, The Netherlands. Tel.: Page 2 of 2

4 TYPE APPROVAL CERTIFICATE Certificate No: TAE00001ET Revision No: 1 This is to certify: That the Frequency Converter with type designation(s) N800A Issued to Hyundai Electric & Energy Systems Co., Ltd. ULSAN, Republic of Korea is found to comply with DNV GL rules for classification Ships and offshore units Application : Frequency Converter for Asyncronous Motors Range: 0,55 kw to 800 kw / (500) / VAC supply. Product(s) approved by this certificate is/are accepted for installation on all vessels classed by DNV GL. This Certificate is valid until Issued at Busan on DNV GL local station: Ulsan for DNV GL Approval Engineer: Baeg Soon Choi Michael Jost Auf der Stroth Head of Section This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed. Form code: TA 1411a Revision: Page 1 of 4 DNV GL DNV GL and the Horizon Graphic are trademarks of DNV GL AS.

5 Job Id: Certificate No: TAE00001ET Revision No: 1 Product description N800A Frequency converter for use in various marine applications. Main voltage V, 50/60Hz, 3Ph Frequency Current rating Frame size Enclosure Converter type 45 degc continuous current I Lout (A) Protection** L BM2Y+xxxx 3,15 MR4 IP21, IP L BM2Y+xxxx 5,7 MR4 IP21, IP L BM2Y+xxxx 9,5 MR4 IP21, IP L BM2Y+xxxx 11,05 MR4 IP21, IP L BM2Y+xxxx 21 MR5 IP21, IP L BM2Y+xxxx 28 MR5 IP21, IP L BM2Y+xxxx 39,5 MR6 IP21, IP L BM2Y+xxxx 55 MR6 IP21, IP L BM2Y+xxxx 68,5 MR7 IP21, IP L BM2Y+xxxx 81,5 MR7 IP21, IP L BM2Y+xxxx 96,5 MR7 IP21, IP L BM2Y+xxxx 127 MR8 IP00, IP21, IP L BM2Y+xxxx 155 MR8 IP00, IP21, IP L BM2Y+xxxx 187,5 MR8 IP00, IP21, IP L BM2Y+xxxx 236 MR9 IP00, IP21, IP L BM2Y+xxxx 280,5 MR9 IP00, IP21, IP54 Frequency Converter type Main voltage V (500V), 50/60Hz, 3Ph Current rating 45degC continuous current ILout (A) Frame size Enclosure Protection** L BM2Y+xxxx 3 MR4 IP21, IP L BM2Y+xxxx 4,95 MR4 IP21, IP L BM2Y+xxxx 6,8 MR4 IP21, IP L BM2Y+xxxx 10,8 MR4 IP21, IP L BM2Y+xxxx 14 MR5 IP21, IP L BM2Y+xxxx 19,5 MR5 IP21, IP L BM2Y+xxxx 27 MR5 IP21, IP L BM2Y+xxxx 34,5 MR6 IP21, IP L BM2Y+xxxx 42 MR6 IP21, IP L BM2Y+xxxx 53,5 MR6 IP21, IP L BM2Y+xxxx 66,5 MR7 IP21, IP L BM2Y+xxxx 79,5 MR7 IP21, IP L BM2Y+xxxx 96 MR7 IP21, IP L BM2Y+xxxx 122,5 MR8 IP00, IP21,IP L BM2Y+xxxx 155 MR8 IP00, IP21,IP L BM2Y+xxxx 187,5 MR8 IP00, IP21,IP L BM2Y+xxxx 233 MR9 IP00, IP21,IP L BM2Y+xxxx 280,5 MR9 IP00, IP21,IP L BM2Y+xxxx 347,5 MR10 IP L BM2Y+xxxx 422,5 MR10 IP L BM2Y+xxxx 555 MR10 IP00 Application/Limitation Form code: TA 1411a Revision: Page 2 of 4

6 Job Id: Certificate No: TAE00001ET Revision No: 1 Supply voltage range: V / (500) V / V, 50/60 Hz Voltage variation: ± 10 % Frequency variation: Hz Output frequency: Hz Temperature range in operation: 0-40 C (40 55 C when derated 2,5%/ C) Temperature class: A Vibration class: A Humidity class: A EMC class*: DNV Standard No 2.4 / IEC C2 To be used on EMC class A locations Documents for the actual application are to be submitted for approval in each case in accordance with DNVGL-RU-SHIP Pt.4 Ch.8 Sec.1 Table2. A Product Certificate is required for converters 100 kw. * Converters EMC classed C2 according to IEC can be installed in "special distribution zone" and "general power distribution zone" in accordance with IEC provided precautions are taken to attenuate these effects on the distribution system, so the safe operation is assured. ** To be installed in an enclosure with an IP degree in accordance with DNV GL Rules w.r.t. location. The Type Approval covers hardware and software for the basic controller. Clause for software control: All changes in software are to be recorded as long as the system is in use on board. The records of all changes are to be forwarded to DNV GL for evaluation and approval. Major changes in the software are to be approved before being installed in the converter. Type Approval documentation Technical information VACON 100 AC DRIVES SIMPLY SUPERIOR Brochure from Vacon, Vacon 100 series voltage and currect ratings, XL sheet from Vacon. Test reports SGS Fimko test reports & 3 issued , issued , , 3 &4 Amendment no 1 issued , 2 &3 issued , & 5 issued and issued SGS Test Reports no & 2 issued VTT Test Report no VTT-S issued & VTT-S issued Vacon Research Reports no. TED10720 to TED10724 issued & TED10757 issued TÛV Technical Report No , dated Type Approval Initial Assessment Report dated Tests carried out Visual inspection, Performance, Power supply failure, Power supply variations, Voltage/frequency variation, Vibration/shock, Dry heat, Damp heat, Insulation resistance, High voltage. EMC: Electrical fast transient (Burst), electrical slow transient (Surge), RF-common mode Voltage, radiated RF-electromagnetic fields, electric discharge (ESD), radiated and conducted emission. Marking of product N800A - Type designation Power Voltage Form code: TA 1411a Revision: Page 3 of 4

7 Job Id: Certificate No: TAE00001ET Revision No: 1 Periodical assessment The scope of the periodical assessment is to verify that the conditions stipulated for the Type Approval is complied with and that no alterations are made to the product design or choice of materials. The main elements of the assessment are: Inspection on factory samples, selected at random from the production line (where practicable) Results from Production Sample Tests (PST) and Routines (RT) checked (if not available tests according to PST and RT to be carried out) Review of type approval documentation Review of possible change in design, materials and performance Ensuring traceability between manufacturer s product type marking and Type Approval Certificate. Assessment to be performed at least every second year. END OF CERTIFICATE Form code: TA 1411a Revision: Page 4 of 4

8 Powered by TCPDF ( EC Type-Examination Certificate Reg.-No.: 01/205/ /17 Product tested Safety Function "Safe Torque Off (STO)" within Adjustable Frequency AC Drives Certificate holder Hyundai Electric & Energy Systems Co., Ltd. 75, Yulgok-ro, Jongno-gu Seoul Republic of Korea Type designation N800A AC Drives with OPT-BJ-V (STO and ATEX option board): Frame Sizes MR4 to MR12, N800A0100-3L-xxxx-y, Details see Revision List Codes and standards EN :2007 EN :2007 EN : A1:2012 EN ISO : AC:2009 EN 62061: AC: A1:2013 IEC Parts 1-7:2010 EN : A1: AC:2010 (in extracts) 10/ E A4 TÜV, TUEV and TUV are registered trademarks. Utilisation and application requires prior approval. Intended application Specific requirements The safety function "Safe Torque Off" complies with the requirements of the relevant standards (PL e / Cat. 3 acc. to EN ISO , SIL CL 3 acc. to EN / EN / IEC 61508) and can be used in applications up to PL e and SIL 3. The instructions of the associated Installation and Operating Manual shall be considered. It is confirmed that the product under test complies with the requirements for machines defined in Annex I of the EC Directive 2006/42/EC. Valid until The issue of this certificate is based upon an examination, whose results are documented in Report No. 968/FSP /17 dated This certificate is valid only for products which are identical with the product tested. It becomes invalid at any change of the codes and standards forming the basis of testing for the intended application. Berlin, Notified Body for Machinery, NB 0035 Dipl.-Ing. Eberhard Frejno TÜV Rheinland Industrie Service GmbH, Alboinstr. 56, Berlin / Germany Tel.: , Fax: , industrie-service@de.tuv.com

9

10

11

12