Light & Motion. Sample applications 259. Ceiling sensors. Wall sensors. Outdoor sensors. Motion. Light &

Transcription

1 «Our intelligent sensing allows an increase in physical and emotional well-being of people in the room. and brightness are detected reliably: For individual, comfortable and increased energy-saving. Sample applications 259 Ceiling sensors MDS Ceiling sensor light + motion 260 RDI Ceiling sensor motion 261 LDF Ceiling sensor light 262 Wall sensors WRF04I Surface mount motion sensor 263 WRF06I Flush mount motion sensor 264 Li04 Light sensor 265 Outdoor sensors Li65 Outdoor light sensor

2 » » BENEFITS»» Energy savings due to demand lighting control»» Increased security»» Increased comfort levels 258

3 «1 2 3 WRF04I Surface-mounted motion sensor, available with LON interface WRF06I Flush-mounted motion sensor, compatible with switch frames 55x55 mm MDS Ceiling-mounted multi sensor light/ motion, available with LON interface 4 5 RDI Ceiling-mounted motion sensor, available with various detection ranges LDF Ceiling-mounted light sensor, available with LON interface HOTEL SECURITY AND ENERGY-EFFICIENCY Intelligent light, motion and multi sensors detect reliably light and motion and control lighting on as required. The guest feels safe and comfortable, the hotel owner saves energy

4 » Ceiling Sensors MDS Ceiling mounted multi sensor designed for measuring light and motion in room and offices spaces and typically used in lighting applications to optimize energy efficiency through lighting control. Low profile design with various output signals compatible to all BMS manufacturers. MDS Output voltage V, load max. 10 ma Output BUS LON Output others Normally open contact, max. 24 V / 1 A (not for LON) Power supply V = (±10%) or 24 V ~ (±10%) Power consumption typ. 1,2 W / 4 VA LON: typ. 1,5 W / 4,2 VA Measuring range light 0..1 klux Accuracy light ±50 Lux Off delay selectable at the device 1 second..30 minutes 4 element PIR (passive infrared) 0..1 klux, photodiode with green filter Ambient temperature C IP20 Pluggable screwing terminal, max. 1,5 mm² Enclosure colour pure white Enclosure material ABS Notes Enclosure for surface mounting available MDS Type Output item No. On stock MDS Standard Relais, Light V ,70 MDS LON LON, Light LON ,80 ACCESSORIES Type item No. On stock Enclosure for surface mounting ,

5 Ceiling Sensors «RDI Ceiling mounted occupancy sensor for room and office spaces. Low profile, discrete design. RDI Output others 24 V: Relay (volt free contact) max. 24 V / 1 A (ohmic) Power supply V = (±10%) or 24 V ~ (±10%) Power consumption typ. 0,5 W (24 V =) 1,1 VA (24 V ~) Detection range RDI Cone detection range angle 82, range 5 m, 64 detection zones. With an installation height of 2,8 m = detection range of 2,4 m. Cone shape detection range, angle 100 /82 (H/V), range 5 m, 64 detection zones. With an installation height of 2,8 m range detection will be 7x5 m Cone detection range, angle 38 /22 (H/V), range 5 m, 24 detection zones. With an installation height of 2,8 m range detection will be approx. 2x1,4 m Off delay approx. 8 seconds PIR (passive infrared) Ambient temperature C IP20 Connection wire length 0,1 m Connection wire PVC Connection wire diameter 0,25 mm² Colour housing pure white Enclosure material ABS RDI Type Output item No. On stock Price cut RDI Standard Relais max. 24 V / 1 A ,70 RDI Small Range Relais max. 24 V / 1 A ,70 RDI Spot Relais max. 24 V / 1 A ,

6 » Ceiling Sensors LDF Ceiling mounted light sensor with straight and diagonal prism options. Integrated colour (green) filter which is adapted to the sensitivity of the human eye. LDF A straight prism LDF A diagonal prism SpannungsversorgungA: V = (±10%) Power consumption A: max. 20 ma / 24 V = V: typ. 0,4 W (24 V =) 0,8 VA (24 V ~) LON: typ. 0,8 W (24 V =) 1,4 VA (24 V ~) Measuring range light 0..2 klux, klux adjustable via DIP switches Accuracy light ±5% of m easuring range Photodiode with green filter Prism shape Straight Angular Prism material Acrylic glass clear Ambient temperature C Cable entry size M20 IP65 Connection cable material PVC screened Connection cable length 2 m, 1 m (Standard) Connection cable diameter 0,25 mm² Housing color pure white Enclosure material PA6 Notes Please contact us for other ranges. LDF active, ma or V Type item No. LDF A straight prism ,90 LDF A diagonal prism ,90 LDF V diagonal prism ,90 LDF V straight prism ,90 LDF LON Type item No. LDF LON straight prism ,60 LDF LON diagonal prism ,60 OPTIONS Type Cable length per additional meter 1,

7 Wall Sensors «WRF04I Room mounted occupancy sensor for room and office applications. Various outputs compatible to all BMS manufacturers. WRF04I Output others 24 V: Relay (volt free contact) max. 24 V / 1 A (ohmic) Power supply V = (±10%) or 24 V ~ (±10%) Power consumption typ. 0,5 W (24 V =) 1,1 VA (24 V ~) LON: typ. 1,2 W (24 V =) 1,6 VA (24 V ~) Detection range RDI Cone shape detection range, angle 100 /82 (H/V), range 5 m, 64 detection zones. With an installation height of 2,8 m range detection will be 7x5 m. PIR (passive infrared) Ambient temperature C Cable entry type Rear entry or top/bottom of enclosure IP30 Colour housing pure white Enclosure material ASA Mounting Install ation on standard flush mounting box. WRF04I Type Output item No. Price cut WRF04I Relais Relais max. 24 V / 1 A ,80 WRF04I LON FTX LON ,40 ACCESSORIES Type item No. On stock Frame for surface mouting WRF ,40 Rawlplugs and screws (2 pcs. each) ,

8 » Wall Sensors WRF06I Flush mounted room occupancy sensor for room and office applications. Various outputs compatible to all BMS manufacturers. WRF06I, Gira E2 pure white Output others 24 V: Relay (volt free contact) max. 24 V / 1 A (ohmic) Power supply V = (±10%) or 24 V ~ (±10%) Power consumption 0,5 W (24 V =) 1,1 VA (24 V ~) Detection range RDI Cone shape detection range, angle 100 /82 (H/V), range 5 m, 64 detection zones. With an installation height of 2,8 m range detection will be 7x5 m. PIR (passive infrared) Switch programmes Frames by Jung, Gira, Merten (stainless steel not possible) Ambient temperature C IP20 Notes Please specify frame design in order. WRF06I Type Output item No. Price cut WRF06I Gira E2 pure white Relais max. 24 V / 1 A ,30 Prices/delivery incl. frame design Gira E2, other designs on request OPTIONS Type Switch design Gira Esprit 35,

9 Wall Sensors «Li04 Room mounted light sensor for room and office spaces, typically used in lighting applications to optimise energy efficiency through lighting control. Li04 Power supply V/LON: V = (±10%) or 24 V ~ (±10%) A: V = (±10%) Power consumption A: max. 20 ma / 24 V = V: typ. 0,4 W (24 V =) 0,8 VA (/ 24 V ~) LON: typ. 0,8 W (24 V =) 1,4 VA (24 V ~) Measuring range light 0..2 klux klux klux Accuracy light ±5% of measuring range Photodiode with green filter Ambient temperature C Cable entry type Rear entry or top/bottom of enclosure IP30 Housing color pure white Enclosure material ASA Mounting Installation on standard flush mounting box. Base part can be mounted and wired separately Li04 active, ma or V Type Output item No. Li04 A ma ,90 Li04 V V ,90 Li04 LON Type Output item No. Li04 LON LON ,60 ACCESSORIES Type item No. On stock Frame for surface mouting WRF ,40 Rawlplugs and screws (2 pcs. each) ,

10 » Outdoor Sensors Li65 Outdoor light sensor typically used in lighting applications to optimise energy efficiency through lighting control. Li65 Power supply V/LON: V = (±10%) or 24 V ~ (±10%) A: V = (±10%) Power consumption A: max. 20 ma / 24 V = V: typ. 0,4 W (24 V =) 0,8 VA (24 V ~) LON: typ. 0,8 W (24 V =) 1,4 VA (24 V ~) Measuring range light 0..2 klux klux klux adjustable via DIP switches Accuracy light ±5% of m easuring range BPW21 Ambient temperature C Cable entry size M20 IP65 Housing top part Material PC, transparent quick lock screws Housing bottom part Material PA6, colour pure white Notes Please contact us for other ranges. Li65 active, ma or V Type Output item No. On stock Li65 A ma ,90 Li65 V V ,90 Li65 LON Type Output item No. Li65 LON FTX LON ,