FTN-RRHW/FTN-RRIX FTN-RR2G/FTN-RRDS
|
|
- Anne Lyons
- 5 years ago
- Views:
Transcription
1 //7 9-- INSTALLATI INSTRUCTIS WIRELESS OUTDOOR DETECTOR FTN-RRHW/FTN-RRIX FTN-RRG/FTN-RRDS FTN-RRHW Honeywell 8 Series Compatible FTN-RRIX Interlogix 9.MHz Compatible FTN-RRG GIG Compatible FTN-RRDS DSC MHz Compatible Product is not produced by, endorsed by, nor is officially associated with Honeywell, Interlogix, GIG, QOLSYS or DSC. FEATURES CTENTS Narrow Angle Detection Detection Range Adjustability (m / m) Intelligent AND logic Horizontal Adjustability Tamper Output Install in accordance with the Standard for Installation and Classification of Burglar and Holdup Alarm Systems, UL 8. FCC NOTICE This device complies with Part of the FCC rules. Operation is subject to the following two conditions: () This device may not cause harmful interference. () This device must accept any interference that may be received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user s authority to operate this equipment. IC NOTICE This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: () This device may not cause interference, and () This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux cnr d Industrie Canada applicables aux appareils radio exempts de licence. L exploitation est autorisée aux deux conditions suivantes: () L appareil ne doit pas produire de brouillage, et () L utilisateur de l appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d en compromettre le fonctionnement. Honeywell, GIG, Interlogix, DSC are trademarks owned by Honeywell International, Inc, rtek Security & Control LLC, United Technologies Corporation, and Tyco Safety Products Canada LTD, respectively. OPTEX Inc. products will function with one of either Honeywell, GIG, Interlogix, or DSC systems. However, no OPTEX Inc. product is produced by, endorsed by, nor is officially associated with Honeywell, GIG, Interlogix, DSC. OPTEX Inc. recommends verifying proper enrollment and operation, per control panel installation instructions, at installation. -- INTRODUCTI - BEFORE INSTALLATI... - ZE CFIGURATI... - PARTS IDENTIFICATI... - DETECTI AREA... INSTALLATI - WIRING DIAGRAM... - ENROLLING TO PANEL... - MOUNTING... 9 WALK TEST - WALK TEST... DIP SWITCH SETTING - WALK TEST MODE... - BATTERY SAVING TIMER... - ALARM & TROUBLE OUTPUT... - LED... - PIR SENSITIVITY... OTHERS - LED LIGHT PATTERN... BATTERY - HOW TO REPLACE BATTERY... - BATTERY LIFE... 7 SPECIFICATIS 7- SPECIFICATIS DIMENSIS...
2 INTRODUCTI - BEFORE INSTALLATI Warning Failure to follow the instructions provided with this indication and improper handling may cause death or serious injury. Caution Failure to follow the instructions provided with this indication and improper handling may cause injury and/or property damage. Avertissement Le non respect des instructions données avec ce signe et une mauvaise manipulation peuvent causer la mort ou des blessures graves. Attention Le non respect des instructions données avec ce signe et une mauvaise manipulation peuvent causer des blessures et/ou des dommages aux biens. The check mark indicates recommendation. The nix Le signe de coche sign indicates prohibition. indique une recommandation. Le signe de négation Warning/Avertissement indique une interdiction. Caution/Attention Do not remove the PCB. Ne pas enlever le PCB. Do not touch the PCB except for the DIP switch. Ne pas toucher le PCB sauf les interrupteurs DIP. Mounting height. Hauteur de montage. Keep the detector parallel to the ground. Consider the direction a person is approaching from, as well as the Maintenir le détecteur parallèle au sol. detection area. Tenir compte de la direction d approche d une personne de même que de la zone de détection..8. m ('7" '") Tilt Ne pas incliner Parallel Parallèle Install the detector in a place where it is free from false alarm factors. For example: Installer le détecteur dans un emplacement ne présentant pas de cause de fausses alarmes. Par exemple : Direct Sunlight and reflection Lumière solaire et réflexion Heat source Source de chaleur -- Objects moving in the wind Objets bougeant au vent
3 - ZE CFIGURATI SUGGESTIS Set up FITLINK according to location as desired. Below are zone configurations for typical location types. Alarm Output Location Disarm Away Stay Front Porch; Backyard Carport; Gate Entrance; Deck Crawl Space; Basement; Storage Shed; Instant Alarm Instant Alarm Garage or Sliding Glass Door; Screened in Porch; Sunroom Entry delay Driveway; Sidewalk; Public Areas - Panel Event Chime Report to CMS Alarm Trouble Toggle On or Off On during disarm Entry delay On during disarm Toggle On or Off PARTS IDENTIFICATI Mounting base Accessories>> Screw kit Screw cap Bracket For wall mounting Screw ( mm) Main unit cover Main unit Transmitter compartment Lens Screw IC ID FTN-RRHW: 8A-RE FTN-RRG: 8A-RE FTN-RRIX: 8A-RE FTN-RRDS: 8A-RE Fixture Screw -- te>> FCC ID FTN-RRHW: UX-REX FTN-RRG: UX-REX FTN-RRIX: UX-REX FTN-RRDS: UX-RE
4 - DETECTI AREA Top view Side view m detection length Adjustable range: 9 (by pitch).8.. m detection length Adjustable range: 9 (by pitch).8.. INSTALLATI - WIRING DIAGRAM - Overall wiring diagram Transmitter Bracket Red Black White Yellow Red: Power input (+) Black: Power input (-) White: Alarm Yellow: Alarm Green Blue Green: Tamper Blue: Tamper Main unit A GND B te>> The battery in the transmitter is shared with the detector. Connection for TROUBLE is used when monitoring for Tamper. --
5 - ENROLLING TO CTROL PANEL Enrolling to Honeywell LYNX Touch L/L7 Series. Place the panel into wireless enrollment mode and then trip the tamper three times.. Set Loop Number to.. Set Device type to Other.. Set Response Type and Alarm Report according to following table.. Set Chime to your preferred type.. Set Supervision to Supervised. Response Type Alarm Report Silent Burglary Crawl Space; Basement; Storage Shed Perimeter Garage or Sliding Glass Door; Screened in Porch; Sunroom Entry Exit Silent Burglary Location Front Porch; Backyard Carport; Gate Entrance; Deck Driveway; Sidewalk; Public Areas Enrolling to Honeywell Residential Vista Panels. While in program mode, press * to enter Zone Programming Menu Mode.. Select or to determine if you will confirm the sensor after learning it.. Enter the zone number that you wish to program (or to exit zone programming). Press [*] to continue.. A summary display appears, press [*] to continue.. Enter Zone Type according to table.. Enter Partition. 7. Enter Report codes according to table. 8. Enter Input Type to = RF (supervised RF transmitter). 9. Learn or input transmitters serial number. (To learn FITLINK, trip the tamper three times.). Change Loop Number to. Location Front Porch; Backyard Carport; Gate Entrance; Deck Crawl Space; Basement; Storage Shed Garage or Sliding Glass Door; Screened in Porch; Sunroom Driveway; Sidewalk; Public Areas Zone Type Type Silent Burglary Report Codes Type Other than Perimeter Burglary Type Entry Exit Other than Type Silent Burglary --
6 - ENROLLING TO CTROL PANEL Enrolling to GIG GC/GC. Select RF Sensor # ( to 8).. Select Sensor Type according the following table.. Select Sensor Equipment Code as [] Other or [9] Existing Motion Detector.. Select Sensor Other Equip code as [] (this menu only appears if [] Other was selected in the previous menu.. At the Sensor Serial Number menu, press shift, then press Learn, and then trip detector tamper switch.. Select Equipment Age as New. 7. Select Loop Number as Loop. 8. Select Dialer Delay as Enabled. 9. Edit Voice Descriptor according to location.. Select Sensor Reports according to following table.. Select Sensor Supervised to Enabled.. Select the desired chime. Location Sensor Type Sensor Reports Front Porch; Backyard Carport; () Response Type Gate Entrance; Deck Crawl Space; Basement; Storage Shed () Perimeter () Exit/Entry () Response Type Garage or Sliding Glass Door; Screened in Porch; Sunroom Driveway; Sidewalk; Public Areas --
7 - ENROLLING TO CTROL PANEL Enrolling to DSC PowerSeries. Put control panel into learn sensor mode.. Push tamper switch to enroll FITLINK.. Press [*] key to confirm ID.. Enter [zone #].. Enter [zone type] according to the following table.. Press the tamper again to Activate the Device for Test. 7. Set Zone Attributes according to following table. Location Front Porch; Backyard Carport; Gate Entrance; Deck Zone Types -hour n-alarm Zone Attributes Set Chime or OFF Crawl Space; Basement; Storage Shed Instant Keep as defaults Garage or Sliding Glass Door; Screened in Porch; Sunroom Delay Keep as defaults Driveway; Sidewalk; Public Areas -Hour n-alarm Enrolling to Qolsys IQ PANEL Set Chime or OFF. Enter Settings Menu and select "Installation".. Select "Security Sensors" and then select "Auto Learn Sensor".. Trip the tamper to enroll within min.. Panel will chime and display the sensor's code. Select OK to confirm.. Set "Sensor Type" to "Motion".. Set "Sensor Name" to the correct name from the list. 7. Set "Chime Type" to your preferred type. 8. Set Sensor Group according to following table. 9. Select "Add New" to complete. Location Front Porch; Backyard Carport; Deck; Gate Entrance Sensor Group : Safty Motion Crawl Space; Basement; Storage Shed 7: Away - Instant Motion Garage or Sliding Glass Door; Screened in Porch; Sunroom : Away - Delay Motion Driveway; Sidewalk; Public Areas : Safety Motion -7-
8 - ENROLLING TO CTROL PANEL Enrolling to Interlogix Simon XTi. Put control panel in learn sensor mode.. Push tamper switch to enroll FITLINK.. Enter Sensor Number. Select Sensor group according to following table.. Change Sensor Name of Item to the correct name from the list.. Press save to save the changes. Location Sensor Type Front Porch; Backyard Carport; : Local special chime Gate Entrance; Deck Crawl Space; Basement; Storage Shed : Instant perimeter Garage or Sliding Glass Door; Screened in Porch; Sunroom : Entry/exit delay Driveway; Sidewalk; Public Areas : Local special chime Enrolling to Interlogix Concord /Concord Express. Put control panel in learn sensor mode.. Select partition.. Enter the sensor group according to following table.. Push tamper switch to enroll FITLINK.. Exit learn sensor mode Enrolling to Interlogix AdvisorOne. From the Sensors screen, press LEARN RF.. Select the sensor group according to following table.. Push tamper switch to enroll FITLINK.. Press CLOSE.. Press EDIT to edit the options.. Select Chime Mode as desired. 7. Press SAVE and CLOSE. Location Sensor Type Front Porch; Backyard Carport; : Local special chime Gate Entrance; Deck Crawl Space; Basement; Storage Shed : Instant perimeter Garage or Sliding Glass Door; Screened in Porch; Sunroom : Supplementary Extended Delay Driveway; Sidewalk; Public Areas : Local special chime -8-
9 - MOUNTING Remove the mounting base. Open the knockout. Mounting base Joint screw knockout Joint screw knockout Mount the mounting base on the wall. Screw ( mm) mm Use this knockout screw hole to mount the base, when making the wall tamper switch effective. If the main unit is peeled off from a wall, this plastic part will be cracked and remain on a wall, activating the tamper switch. Mounting height:.8. m Screw ( mm) te>> Transmitter needs to be enrolled to reciever before installing the detector. Attach the bracket and main section. Open the main unit cover te>> Be sure to set the screw cap after installing the mounting base. -9-
10 Determine the horizontal detection angle and attach the fixture. tes>> te>> To make adjustments, remove the fixture. Align the detection area parallel to the wall to reduce interference with the wall. te>> Check that the fixture and bracket engage correctly. When the unit is mounted on the corner to look ahead along the wall, choose the guide-mark located on the opposite side of the wall. When the unit is mounted on the wall and the detection pattern is at 9 degrees, choose the corresponding engraved guide mark. - -
11 8 Determine the detection length. ( m or m) If m is required, rotate the lower lens 8 degrees. te>> Do not remove the upper lens. m detection length (Factory default) m detection length Side view Side view Attach the fixture..8.. Attach the main unit cover. te>> To prepare for walk test, check that DIPswitch (WALKTEST MODE) is set to (TEST) before attaching main unit cover. Fixture walk test. Perform For details, refer to -. walk test is complete, set DIP After switch (WALK TEST MODE) from to OFF. te>> The battery life will be shortened unless the DIP switch is set to OFF. - -
12 WALK TEST - WALK TEST Set the DIP switch (WALK TEST MODE) to (TEST). Check that LED lights for seconds when the intended object is detected. DIP switch Detected t detected te>> The switch is set to (TEST) by factory default. Set the DIP switch (WALK TEST MODE) to OFF (NORM). tes>> DIP switch The battery life will be shortened unless the DIP switch is set to OFF. To use the LED in normal operating condition, set the DIP switch to. DIP SWITCH SETTING Do not touch the PCB except for the DIP switch. DIP switch : Factorydefault - WALK TEST MODE TEST WALK TEST MODE BATTERY SAVING TIMER ALARM & TROUBLE OUTPUT LED PIR SENSITIVITY N/A NORM DIP switch Position Function TEST (Factory default) The LED lights irrespective of the DIP switch (LED) setting. The DIP switch (BATTERY SAVING TIMER) setting is inactive. NORM The LED lights depending on the DIP switch (LED) setting. The DIP switch (BATTERY SAVING TIMER) setting is active. - -
13 - BATTERY SAVING TIMER S S te>> The detector will not generate alarms at intervals shorter than the specified time. - Position S S (Factory default) N.O. - sec. N.C. N.O. output N.C. (Factory default) N.C. output Position OFF PIR SENSITIVITY Function LED LED OFF OFF (Factory default) - Function DIP switch DIP switch N.O. sec. Position LED Function ALARM & TROUBLE OUTPUT DIP switch te>> If the LED lights, check the DIP switch (WALKTEST MODE) setting. DIP switch STD Position LOW STD (Factory default) LOW - - Function rmal sensitivity Low sensitivity
14 OTHERS - LED LIGHT PATTERN The following explains the LED light pattern. LED Blink Detector condition Light LED indicator Warm-up te>> The LED blinks even if the DIP switch (LED) is set to OFF. Blinks for approx. seconds. Alarm Lights for seconds. - - OFF
15 BATTERY The detector shares the battery with the transmitter. - HOW TO REPLACE BATTERY Remove the bracket and main section. Replace the battery. Install a new battery. Attach the bracket and main section. - BATTERY LIFE The values indicated are only for reference on each condition. The sensor will send low battery transmissions to the control panel. CRA ( V, mah) Alarm trigger per day Battery Life Approx. years Approx. years - -
16 7 SPECIFICATIS 7- SPECIFICATIS Model FTN-RRHW Detection method PIR coverage Detection length limit Detection width Detectable speed Sensitivity Power source Current draw Alarm period Warm-up period Alarm output Trouble output Passive infrared '" '" ( m) '7", '" ( m, m) '" wide at '" / " wide at '7" ' '"/s (.. m/s). F (at '/s) (. C (at. m/s)) CRA Lithium battery.μa standby / ma max. at V DC. ±. sec. Approx. sec. (LED blinks) N.C./N.O. Selectable-Solid State Switch V DC. A (max.) N.C./N.O. Selectable-Solid State Switch V DC. A (max.) Enable: During DIP switch (WALK TEST MODE) or DIP switch (LED) Disable: During normal operation Light/Blink: Warm-up, alarm alarm V/m - to + F (- to + C) 9% max. IP Wall (Outdoor, Indoor) '7" to '" (.8 to. m). oz. (8g) without wireless transmitter and battery screw ( mm) LED indicator RF Interference Operation temperature Environment humidity Weatherproof Mounting Mounting height Weight Accessories FTN-RRIX FTN-RRG FTN-RRDS *Specifications and design are subject to change without prior notice. 7- DIMENSIS NOTE These units are designed to detect an intruder and activate an alarm control panel. Being only a part of a complete system, we cannot accept responsibility for any damages or other consequences resulting from an intrusion..9 (7.) Unit: in (mm).7 (.) For programming technical support: For OPTEX support: support@optexamerica.com (7.) OPTEX INC. (U.S.) URL: OPTEX SECURITY SAS (France) URL: OPTEX KOREA CO.,LTD. (Korea) URL: OPTEX DO BRASIL LTDA. (Brazil) URL: OPTEX SECURITY Sp.z o.o. (Poland) URL: OPTEX (EUROPE) LTD. / EMEA HQ (U.K.) URL: OPTEX PINNACLE INDIA, PVT., LTD. (India) URL: OPTEX (DGGUAN) CO.,LTD. SHANGHAI OFFICE (China) URL: OPTEX TECHNOLOGIES B.V. (The Netherlands) URL: OPTEX (Thailand) CO., LTD. (Thailand) URL: Copyright (C) 7 OPTEX CO.,LTD. - -
FTN-RRHW/FTN-RRIX FTN-RR2G/FTN-RRDS
59-64-0 INSTALLATI INSTRUCTIS WIRELESS OUTDOOR DETECTOR FTN-RRHW/FTN-RRIX FTN-RRG/FTN-RRDS FTN-RRHW Honeywell 5800 Series Compatible FTN-RRIX Interlogix 39.5MHz Compatible FEATURES Narrow Angle Detection
More informationHX-80NRAM. High Mount Outdoor Detector
Battery operated with 2 PIRs and HX-80NRAM anti-masking Battery operated Battery saving logic Compatible with most wireless transmitter Long distance detection area (24.0 m) Flexible detection area setting
More informationSZ-PIR04N ZigBee Motion Detector Installation Guide
SZ-PIR04N ZigBee Motion Detector Installation Guide SZ-PIR04N is a PIR (Passive Infrared) sensor, which can detect levels of infrared radiation from objects in its range of view. This Motion Detector is
More informationXHS1-TY / MP-841 ZigBee Home Automation 1.2 Wireless Digital Pet Immune PIR Detector
XHS1-TY / MP-841 ZigBee Home Automation 1.2 Wireless Digital Pet Immune PIR Detector Installation Instructions 1. INTRODUCTION The XHS1-TY or MP-841 (pet immune) is a microprocessor-controlled wireless
More informationAutomatic Dimming Mirror with HomeLink
Automatic Dimming Mirror with HomeLink Your new vehicle comes with an Automatic-Dimming Mirror with an Integrated HomeLink Wireless Control System. During nighttime driving, this safety feature will automatically
More informationHX-40/40AM/ 40DAM. High Mount Outdoor Detector
HX-40 PIRs standard model HX-40AM HX-40 with anti-masking HX-40DAM HX-40AM with micro-wave 3.0 m high mount detection area (.0 m) Unique pyro element Intelligent AND logic High Mount Outdoor Detector HX-40/40AM/
More information1100X Wireless Receivers
00X Wireless Receivers INSTALLATION GUIDE Description The 00X Wireless Receiver is compatible with all DMP wireless devices. The receiver provides two-way, supervised communication using 900 MHz frequency
More informationPet Immune SAW PIR Motion Sensor
PET Immune SAW PIR Motion Sensors Installation Sheet Description This is the Installation Sheet for SAW PIR and PET Immune Motion Sensors. See Table 1. Table 1: Motion Sensors 60-807-95R 60-807-01-95R
More information1100D Wireless Receiver
00D Wireless Receiver INSTALLATION GUIDE Description The 00D Wireless Receiver provides up to 32 wireless zones for XT30/XT50 Series panels with Version 02 or higher. The 00D provides two-way, supervised
More informationNXSMP-LMI LOW MOUNT INDOOR SENSOR MODULE
NXSMP-LMI LOW MOUNT INDOOR SENSOR MODULE INSTALLATION AND OPERATION INSTRUCTIONS MODEL NUMBER NXSMP-LMI PRECAUTIONS Read and understand all instructions before beginning installation. CAUTION: FOR USE
More informationWireless External Alarm
Wireless External Alarm Model: SA-001S User s Instructions TABLE OF content INTRODUCTION... 2 INSTALLATION... 2-4 PROGRAMMING LEARN REMOTE OR SENSORS OR CONTROL PANEL... 4-6 ERASE REMOTE OR SENSOR OR CONTROL
More informationTech Support Line: (715) Concord 4 RE927X
RE927X RE927X Tech Support Line: (715)808-0164 RE927X-03-00 Flexible Bus 3G GSM Communicator Features Connects panels to GSM Network Compatible with: o Honeywell Vista 15P and 20P o DSC PowerSeries o CADDX
More informationDT8050A DUAL TEC Motion Sensor with Anti-Mask - Installation Instructions
DT8050A DUAL TEC Motion Sensor with Anti-Mask - Installation Instructions QUICK LINKS Mounting Location Guidelines Open the Sensor Mount the Sensor Sensor Components and Settings Wire the Sensor Wiring
More information2 x screws. 2 x wall plugs
INSIDE THE BOX 2 x screws Main display 2 x wall plugs Wall mount RH RH Y1 Y1 RC O/B AUX RC Y2 O/B G AUX W1 Y2 G W1 C C W2 W2 Wire labels Adapter plate 4 x AA Batteries GETTING STARTED The ZEN thermostat
More informationWireless Weather Station
Welcome! -------------- Congratulations on your new and welcome to the La Crosse Technology family! This product was designed with you in mind by our hometown team of weather enthusiasts based in La Crosse,
More informationModel:T83646v2 Quick Setup Guide DC: WIRELESS WEATHER STATION
Model:T83646v2 Quick Setup Guide DC: 012015 WIRELESS WEATHER STATION FRONTVIEW Time and Moon Phase Indoor Temp/Humidity with Trend, Mold Risk, + Temperature Alerts. Calendar + Time Alarm Remote Temp/Humidity
More informationQUICK START GUIDE. Lono, LLC 686 East 110 South, Suite 102 American Fork, UT 84003
QUICK START GUIDE Lono, LLC 686 East 110 South, Suite 102 American Fork, UT 84003 Welcome. This guide will help you install your Lono controller. For additional information, check out our installation
More informationRev D 3/20/17
Rev D 3/20/17 Installation and Operating Instructions ADAEZ Wireless Interface Module (WIM) Note Changes or modifications not expressly approved by the party responsible for compliance could void the user
More information5800-OD Wireless Outdoor Motion Sensor Installation Instructions
GENERAL INFORMATION The Honeywell 5800-OD Wireless Outdoor Motion Sensor (referred to as the 5800-OD) combines the convenience of wireless technology with a full featured outdoor PIR motion sensor. The
More informationADT. Pulse 2017ADT LLC
ADT Pulse Interactive Solutions DBC835 Wirelesss HD Doorbell Cameraa Quick Installation Guide Property of ADT, LLC. Information accurate as of published date and is provided as is without warranty of any
More information1 Copyright 2015 Alarm.com. All rights reserved. Rev 3.4
Interlogix part number: 600-9400-IMAG Alarm.com part number: ADC-IS-221-LP Alarm.com Image Sensor PRODUCT SUMMARY The Image Sensor is a pet immune PIR (passive infrared) motion detector with a built-in
More information1 Copyright 2014 Alarm.com. All rights reserved. Rev 3.3
Interlogix part number: 600-9400-IMAG Alarm.com part number: ADC-IS-200-LP Alarm.com Image Sensor PRODUCT SUMMARY The Image Sensor is a pet immune PIR (passive infrared) motion detector with a built-in
More informationIntelligent Home Solutions Quick Start Guide. Monitor your home from anywhere with your smartphone
Model: isb01 Intelligent Home Solutions Quick Start Guide Wi-Fi MOTION SENSOR Monitor your home from anywhere with your smartphone WHAT YOU LL NEED WiFi network transmitting at 2.4GHz; WPA2 security type
More informationSmart THERMOSTAT. Installation Manual
Smart THERMOSTAT Installation Manual Thanks for inviting KONO TM into your home. The setup process is easy. All you need to do is follow these simple steps and you ll be on your way to saving energy and
More informationSmart Hub THERMOSTAT. Installation Manual
Smart Hub THERMOSTAT Installation Manual Thank you for inviting KONOz into your home. The setup process is easy. All you need to do is follow these simple steps and you ll be on your way to saving energy
More informationCLIP PG2 PowerG Wireless, Curtain, PIR Motion Detector
CLIP PG PowerG Wireless, Curtain, PIR Motion Detector Installation Instructions. INTRODUCTION The CLIP PG is a small and elegant wireless curtain-pattern PIR detector for indoor use and designed for easy
More informationImpassa CDMA Module INSTALLATION GUIDE
Impassa CDMA Module INSTALLATION GUIDE Introduction The CDMA Module with firmware version 181 for Impassa enables wireless reporting of all alarms and other system events from the DSC Impassa control panel
More informationAtomic Digital Office Clock
Atomic Digital Office Clock MONTH DATE For online video support: http://bit.ly/laxtechtalk Instructional Manual Model: 513-1419BL-WA DC:112516 Protected under U.S. Patents: 5,978,738 6,076,044 RE43903
More informationWireless Outdoor Air Reset Adaptor PN:
Wireless Outdoor Air Reset Adaptor PN: 105767-01 Instruction Sheet APPLICATION The Wireless Outdoor Air Reset Adaptor, when connected to the Concert Boiler Control enables efficiency control functionality
More informationShockLink. Important Product Information.
EN ShockLink Important Product Information www.laerdal.com English ShockLink Important Information Warnings and Cautions A Warning states a condition, hazard, or unsafe practice that can result in serious
More informationEvolve 5.5 cu. ft. Medical-grade Undercounter Refrigerator
Evolve 5.5 cu. ft. Medical-grade Undercounter Refrigerator Quick Start Guide Product Features Quiet Operation Temperature Uniformity SilverPoint Enabled Local and Remote Alarms Stable Temperature Control
More information1126 Series Ceiling Mount PIR Motion Detector
Installation Sheet 1126 Series Ceiling Mount PIR Motion Detector Description The 1126 Series PIR (Passive Infrared) Motion Detectors are a compact wireless PIR. The 1126 Series offer 360, Wide Angle, or
More informationWi-Fi DOOR/WINDOW SENSOR
Model: isb04 Intelligent Home Solutions Quick Start Guide Wi-Fi DOOR/WINDOW SENSOR Monitor your home from anywhere with your smartphone WHAT YOU LL NEED WiFi network transmitting at 2.4GHz; WPA2 security
More informationOPERATION MANUAL WARNING TO REDUCE THE RISK OF INJURY OR PRODUCT DAMAGE, READ OPERATION MANUAL PRIOR TO OPERATING PRODUCT.
TM OPERATION MANUAL WARNING TO REDUCE THE RISK OF INJURY OR PRODUCT DAMAGE, READ OPERATION MANUAL PRIOR TO OPERATING PRODUCT. PATENT PENDING - COPYRIGHT 2014 - APPION INC. - ALL RIGHTS RESERVED Introduction
More informationPET IMMUNE PIR MOTION DETECTOR
SP815 PET IMMUNE PIR MOTION DETECTOR The SP815 is a multifunction device with motion detector and temperature/humidity sensor. It uses Passive Infra-Red (PIR) technology to detect movement in a protected
More information1164/1164NS WIRELESS SMOKE DETECTOR
1164/1164NS WIRELESS SMOKE DETECTOR Installation Guide Figure 1: 1164/1164NS Smoke Detector DESCRIPTION Model 1164/1164NS Wireless Smoke Detectors are 3.0V battery-powered, wireless, low-profile, photoelectric
More informationInTemp CX Temperature Logger (CX40x) Manual
InTemp CX Temperature Logger (CX40x) Manual InTemp CX400 series loggers measure temperature in indoor monitoring applications. Designed to meet World Health Organization (WHO) and Centers for Disease Control
More informationInstallation Guide. Model TBZ48A Battery Powered Z-Wave Thermostat. This thermostat is compatible with most HVAC systems, including the following:
Installation Guide Model TBZ48A Battery Powered Z-Wave Thermostat This thermostat is compatible with most HVAC systems, including the following: 24VAC systems Note: requires both the R and C wires unless
More informationSAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
ZR Series Commercial Specification Troffers with Emergency Driver Includes: ZR14, ZR22 and ZR24 IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed
More informationInstallation Instructions
Indoor/Outdoor PIR Motion Sensors 466-1534G August 2006 Copyright 2006, GE Security Inc. Introduction This is the GE Indoor/Outdoor PIR Motion Sensors Installation Instructions for model numbers: 60-639-95R
More informationRE6100 Series Helix Security and Automation Platform E I D
RE6100 Series Helix Security and Automation Platform G I INSTALL U E I D Meet Helix Helix is a professional wireless security panel designed to deliver home security and automation services. A secured
More informationTP WEM01 A Carrierr Côr Thermostat AC/HP Wi-Fir Thermostat Performance Series. Installation Guide
TP WEM01 A Carrierr Côr Thermostat AC/HP Wi-Fir Thermostat Performance Series Installation Guide INTRODUCTION Welcome and from all of us at Carrier, thank you for purchasing your new Côr thermostat: the
More informationCLIP PG2. Installation Instructions. PowerG Wireless, Curtain, PIR Motion Detector 1. INTRODUCTION 2. INSTALLATION. 2.1 General Guidelines
CLIP PG PowerG Wireless, Curtain, PIR Motion Detector Installation Instructions. INTRODUCTION The CLIP PG is a small and elegant wireless curtain-pattern PIR detector for indoor use and designed for easy
More informationSkyNEST WASP Portable Kit, Smart Receiver and SCADA Gateway with Solar Panel USER MANUAL
SkyNEST WASP Portable Kit, Smart Receiver and SCADA Gateway with Solar Panel USER MANUAL VERSION 1.1 22/08/2018 VISIT OUR WEBSITE FOR MORE INFORMATION. WWW.BOSSPAC.COM WASP is a registered trademark owned
More informationS541.RF 4G Product Guide
S541.RF 4G Product Guide Table of Contents Table of Contents... Page 1 Overview and General Concept... Page 2 Application... Page 2 Features... Page 3 Specifications... Page 3 Network Topology... Page
More informationWIRELESS OUTDOOR DUAL TECHNOLOGY MOTION DETECTOR AOD-200
aod-200_en 05/16 WIRELESS OUTDOOR DUAL TECHNOLOGY MOTION DETECTOR AOD-200 SATEL sp. z o.o. ul. Budowlanych 66 80-298 Gdańsk POLAND tel. +48 58 320 94 00 www.satel.eu Firmware version 1.0 WARNING The device
More informationSuperCELL Model SC500-H-SM User s Information
SuperCELL Model SC500-H-SM User s Information Antenna Swivel Clip Alarm Power Menu LCD Display Power Select Operation Status LED Alarm Up 1 Message Down 1 Message Up 16 Messages Down 16 Messages Front
More information1125 PIR Motion Detector
Tamper Survey LED INSTALLATION SHEET 1125 PIR Motion Detector Description The 1125 PIR (Passive Infrared) Motion Detector is a wireless, low current sensor for use with the 1100D Wireless Receiver. Using
More informationOptima ZigBee Thermostat
Optima ZigBee Thermostat Quick Start Guide For other language versions, please visit: www.salusinc.com LET S GET STARTED Make sure you have the following items: Thermostat with Mounting Plate Trim Plate
More information1164/1164NS Wireless Smoke Detector INSTALLATION AND PROGRAMMING GUIDE
1164/1164NS Wireless Smoke Detector INSTALLATION AND PROGRAMMING GUIDE TABLE OF CONTENTS About the 1164... 1 Indicator LEDs... 1 Optional Tamper... 1 Power Supply... 1 Cadence Synchronization... 1 1164
More informationTouchscreen Comfort Control
12-5058-04 Touchscreen Comfort Control Model ACONT624AS42DA User Guide Nexia Home Intelligence Customer Service: (877) 288-7707 For HVAC related issues, contact your servicing dealer ÎÎ NOTE: A 24 Volt
More informationAX-100TFR/AX-200 TFR INTRODUCTION 1-1 BEFORE YOUR OPERATION BATTERY OPERATED PHOTOELECTRIC DETECTOR. Warning FEATURES. Caution. Warning.
FEATURES 4 5 6 No.59-55- 09040 INSTALLATION INSTRUCTIONS N9 BATTERY OPERATED PHOTOELECTRIC DETECTOR AX-00TFR/AX-00 TFR AX-00TFR : Detection range: 0 m (00 ft.) AX-00TFR : Detection range: 60 m (00 ft.)
More information1134 Wireless Wiegand Module INSTALLATION AND PROGRAMMING GUIDE
1134 Wireless Wiegand Module INSTALLATION AND PROGRAMMING GUIDE TABLE OF CONTENTS About the 1134... 1 Power Supply... 1 Zone Terminals... 1 Annunciators... 1 LED Indicators... 1 LED Survey... 2 Form C
More informationDoor/Window Sensor Installation Instructions
Door/Window Sensor Installation Instructions Product Overview Z-Wave+ enabled device which provides open/closed position status Transmits open/closed status Reports tamper condition when cover is open
More informationwith motion sensor ITM. / ART Model: LM55811 CARE & USE INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
LED Utility Light with motion sensor ITM. / ART. 688836 Model: LM55811 CARE & USE INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY For assistance with assembly or installation, parts
More informationWater Sensor. Model CFWS10
Water Sensor Model CFWS10 Owner s Manual Activates When in Contact with Water Built in Freeze Alert For Use with the Comm Link and OmniShield App Internal Horn for Audible Feedback Backlit LED Icons for
More informationIntelli-Time Alarm Clock model 13041RM
Instruction Manual Intelli-Time Alarm Clock model 13041RM CONTENTS Unpacking Instructions... 2 Package Contents... 2 Product Registration... 2 Features & Benefits: Sensor... 2 Features & Benefits: Clock...
More informationEL-TSTAT Owner s Manual
EL-TSTAT-8810 Owner s Manual TABLE OF CONTENTS TABLE OF CONTENTS EL-TSTAT-8810 ABOUT YOUR NEW THERMOSTAT Thermostat features 3 Controls & display overview 4 WI-FI SETUP 5-6 OPERATION & PROGRAMMING Select
More informationEmbedded Door Sensor. User's Manual. Model SS881ZB. For other language versions, please visit:
Embedded Door Sensor Model SS881ZB User's Manual For other language versions, please visit: www.salusinc.com ii Salus CONTENTS SAFETY INSTRUCTIONS PRODUCT INTRODUCTION 1 IN THE BOX 1 CONTROLS AND INDICATORS
More informationResolution Compatibles Flex GSM IGM is a GSM cellular device that provides
RE927X 3G Flex GSM Interactive Gateway Module Resolution Compatibles Flex GSM IGM is a GSM cellular device that provides interactive services and home automation to existing security systems. Features
More informationGARAGE DOOR OPENER KIT
GARAGE DOOR OPENER KIT P/N 2883417 APPLICATION All 2018 and newer Slingshot models with Garage Door Opener By Homelink Kit PN 2881814 BEFORE YOU BEGIN Read these instructions and check to be sure all parts
More informationDUAL ZONE OUTDOOR PIR MS-12TE & MS-12FE
DUAL ZE OUTDOOR PIR MS-12TE & MS-12FE INSTRUCTI MANUAL We appreciate your purchase of a TAKEX passive infrared sensor. This sensor will provide long and dependable service when properly installed. Please
More informationLow Voltage Fan Coil Thermostat ST101ZB. Quick Start Guide. For other language versions, please visit
Low Voltage Fan Coil Thermostat ST101ZB Quick Start Guide For other language versions, please visit www.salusinc.com Notices Please read these instructions carefully before installing and using the Low
More informationXL200L/600L/700L GPRS Control Panel
Doc. - Ref. 220-XLL Version : June 2014 Description The XLL GPRS alarm panel is a Videofied wireless, battery operated security system. The control panel is designed for residential and small commercial
More informationSmoke Bridge Owner s Manual
Smoke Bridge Owner s Manual 2982-222 Page 1 of 14 About Smoke Bridge... 3 Features and Benefits... 3 Installation... 3 First Alert Setup... 4 Pairing Smoke Bridge to First Alert Smoke Alarm... 4 INSTEON
More informationDraft - develop and review
MST Personnel Proximity Detection System Overview v. #.# Draft - develop and review System Overview 2.0 - Proximity Detection System.docx 1 January 2014 Page 1 of 18 The MST Proximity Solution The MST
More informationNo INSTALLATION INSTRUCTIONS m (7.6-3 ft.) Far area mirror Masking plate for far area Fixing rubber form
No.9-176-1 9-3 INSTALLATION INSTRUCTIONS INSTALLATION AND MAINTENANCE NOTES Warning REDWALL-V series FEATURES Never repair or modify product Nylon wire loop Hold the main unit securely when you install
More informationCaught a critter in the act?
Havahart Spray Away Hydro-Remote Animal Repellent Sprinkler Owner s Manual Model #5267 Caught a critter in the act? Visit us on Facebook to share your favorite photos of critters you ve spotted, for the
More informationRCR-REX Request-to-Exit Dual Technology Motion Sensor Installation Guide
RCR-REX Request-to-Exit Dual Technology Motion Sensor Installation Guide Introduction This is the Interlogix RCR-REX Request-to-Exit Dual Technology Motion Sensor Installation Instructions for models RCR-REX-W,
More informationNest x Yale Lock Programming/Troubleshooting Guide
Nest x Yale Lock Programming/Troubleshooting Guide Touch Yale logo to wake lock. You will be guided to set up the Master Passcode by following the audio instructions on the lock. Once installation is complete,
More informationInstallation and ZONES: Operation Manual. Model: ON STI-34108
N.O. COM N.C. + 12 V - IN + 12 V - OUT 500 ma 300 ma PLUG IN ADAPTER 12 V 500mA Trigger Output 12 V 75mA N.O. COM N.C. + 12 V - IN + 12 V - OUT 500 ma 300 ma PLUG IN ADAPTER 12 V 500mA Trigger Output 12
More informationYale Real Living Key Free Touchscreen Deadbolt Installation and Programming Instructions (YRD240)
Yale Real Living Key Free Touchscreen Deadbolt Installation and Programming Instructions (YRD240) Optional Network Module x3 #8-32 x 5/16" Machine screws x4 #7 wood & #8-32 machine x 20mm Combination screws
More informationYale Real Living Touchscreen Deadbolt Installation and Programming Instructions (YRD220)
Yale Real Living Touchscreen Deadbolt Installation and Programming Instructions (YRD220) Optional Network Module x3 #8-32 x 5/16" Machine screws x4 #7 wood & #8-32 machine x 20mm Combination screws x2
More informationAdvisorOne Quick Operation Guide
AdvisorOne Quick Operation Guide EN CNF ES PR English: Quick Operation Guide Introduction AdvisorOne (part # AVO-1037) is a wireless, self-contained system used to detect, control and inform of security
More informationUSER GUIDE WIRE-FREE HOME PROTECTION SYSTEM AG100+ CONTENTS
CONTENTS USER GUIDE WIRE-FREE HOME PROTECTION SYSTEM AG00 Section Getting started. General system overview. Introduction to the system. Items included with the system. Introduction to the Smart Panel.5
More informationXT-iP 210 Control Panel
XT-iP 210 Control Panel Description The XT-IP210 Indoor Panel with GPRS & Ethernet alarm panel is a Videofied wireless, battery operated security system. The control panel is designed for residential and
More informationYale Real Living Touchscreen Lever Installation and Programming Instructions (YRL220)
Yale Real Living Touchscreen Lever Installation and Programming Instructions (YRL220) x2 M4 x 25.4mm pan head machine screws x4 M4 x 8mm pan head machine screws x4 #7 wood & #8-32 machine x 20mm Combination
More informationHow to install your ecobee4
How to install your ecobee4 Be happy You have joined a growing community of people who want to conserve energy, save money, and do something good for our planet. Let s get started! Download the ecobee
More informationYale Real Living Key Free Push Button Deadbolt B1 with Installation and Programming Instructions
Yale Real Living Key Free Push Button Deadbolt B1 with Installation and Programming Instructions L WAVE x3 #8-32 x 5/16" Machine screws x4 #7 wood & #8-32 machine x 20mm Combination screws x2 M6x47mm Long
More informationXV 210 GPRS Control Panel
Description The XV GPRS alarm panel is a Videofied wireless, battery operated security system. The control panel is designed for residential and small commercial security applications where video verification
More informationEN1221S-60 Waterproof Pendant Installation and Operation Manual
EN1221S-60 Waterproof Pendant Installation and Operation Manual 1 Overview The Inovonics waterproof pendant is small, light and comfortable to wear, and provides advanced functionality and reliability
More informationInstallation Instructions
Installation Instructions S E C U R I T Y S Y S T E M Please refer to the System Installation Manual for information on limitations regarding product use and function and information on the limitations
More informationYale Real Living Push Button Deadbolt Installation and Programming Instructions (YRD210)
Yale Real Living Push Button Deadbolt Installation and Programming Instructions (YRD210) Optional Network Module x3 #8-32 x 5/16" Machine screws x4 #7 wood & #8-32 machine x 20mm Combination screws x2
More informationCaddx Installation Instructions Package
Caddx Installation Instructions Package This package includes instructions for the following Caddx products: NetworX NX-E Series Receiver Modules NX-408E & NX-408E-I, NX-416E & NX-416E-I, NX-448E & NX-448E-I
More informationWireless Driveway and Intruder Alert
Wireless Driveway and Intruder Alert USER MANUAL SFA600 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. COMPLIANCE WITH FCC REGULATIONS
More informationnextouch Touchscreen and Push Button Access Cylindrical Lock Installation and Programming Instructions
nextouch Touchscreen and Push Button Access Cylindrical Lock Installation and Programming Instructions 3/32" Optional Optional AA AA AA AA Retrofitting or modifying this product may impact fire rating,
More informationNetworX NX-548E Receiver Installation Instructions
NetworX NX-548E Receiver Installation Instructions Content Introduction... 1 Internal mounting... 1 External mounting... 2 Wiring... 3 DIP switch settings... 3 Power up... 3 Programming... 4 Testing and
More informationGo!Control. Installation and Programming Technical Training
Go!Control Installation and Programming Technical Training HARDWARE System Capabilities What s Inside The Transformer Terminal Block GSM Unit SYSTEM CAPABILITIES 48 Wireless Zones 2 Hardwired Zones 8 Keyfobs
More informationADEMCO 4208SNF V-Plex Universal Class A Module INSTALLATION AND SETUP GUIDE
K3179V2 2/11 Rev. A ADEMCO 4208SNF V-Plex Universal Class A Module INSTALLATION AND SETUP GUIDE FEATURES The ADEMCO 4208SNF Universal Class A Module can be used in either of two different applications.
More informationYale Real Living Push Button Lever Installation and Programming Instructions (YRL210)
Yale Real Living Push Button Lever Installation and Programming Instructions (YRL210) x2 M4 x 25.4mm pan head machine screws x4 M4 x 8mm pan head machine screws x4 #7 wood & #8-32 machine x 20mm Combination
More informationInstallation Instructions
Request-to-Exit Dual Technology Motion Sensor 1048889B November 2005 Copyright 2005, GE Security Inc. Introduction This is the GE Request-to-Exit Dual Technology Motion Sensor for models -W, -B, and -G.
More informationHOBO MX Temp/RH Data Logger (MX1101) Manual
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com HOBO MX Temp/RH Data Logger (MX1101) Manual The HOBO MX Temp/RH data logger records and transmits temperature
More informationXTO-IP ALARM PANEL. Description. Supervised Wireless Technology. Features
DOC. - REF. 220-XTO-IP EDITION DATE. : FEBRUARY 2016 Description The XTO-iP GPRS alarm panel is a Videofied weatherproof, wireless, battery operated security system. The control panel is designed for outdoor
More informationDescription. Optex Incorporated
Optex Incorporated Description 1845 W. 205 th St. Torrance, CA 90501-1510 USA TEL (310) 533-1500 and (800) 966-7839 FAX (310) 533-5910 Doc: Model: Desc: Architect/ Engineer Specifications CX-502 PIR Intrusion
More informationInstall Guide TP-2014-IG-V02
Install Guide TP-2014-IG-V02 Copyright Information TP-2014-IG-V02 2016 Promethean Limited. All rights reserved. All software, resources, drivers and documentation supplied in the Promethean ActivInspire
More informationLS800S Intruder Alarm System. Engineering Manual
LS800S Intruder Alarm System Engineering Manual Table of Contents Section 1 Overview of System 1.1 Kit Contents 1.2 Tools Required 1.3 System Features Section 2 Planning your installation 2.1 Location
More informationicontrol OpenHome Converge Panel Interface Module Installation Guide Congratulations on purchasing your Panel Interface module.
icontrol OpenHome Converge Panel Interface Module Installation Guide Congratulations on purchasing your Panel Interface module. The icontrol Networks, Inc. OpenHome Converge Panel Interface Module (PIM)
More informationFeatures and content. This is where air comes into your detector.
Features and content 1. Power indicator 2. Light ring 3. Motion sensor 4. Air inlets 5. Battery compartments (observe polarity symbols) 6. One-time battery tab 7. Individual serial number 8. Mounting bracket
More informationSimon XTi Quick Operation Guide
Simon XTi Quick Operation Guide This is the Quick Operation Guide for the Simon XTi system (models 600-1054-95R-12 & 600-1054-95R-12-CN). The Simon XTi provides a graphical user interface for programming
More informationIntroduction S E C T I O N 1
Introduction S E C T I O N 1 The PC4164-RS is a wireless signal receiver for use with Maxsys PC4010 and PC4020 v3.0 panels. The PC4164-RS receives signals from WLS9XX wireless devices. The PC4164-RS has
More information