TrueAlarm Fire Alarm Systems

Transcription

1 TrueAlarm Fire Alarm Systems UL, ULC, CSFM Listed; Fire Alarm Network Annunciators; FM Approved* TrueSite Incident Commander; Version 4.02 Features TrueSite Incident Commander provides 4100ES mounting for the Simplex TrueSite Workstation: All-in-one touchscreen computer/monitor mounts in a 4100ES cabinet and is powered from the fire alarm system power supply, including battery backup Seismic hardware; 4100ES mounting with battery brackets provides seismic area protection (see page 4) High resolution touchscreen monitor Includes Windows 10 Enterprise (64-bit) Hinged mounting bracket allows convenient service access Available for desktop use operating at 120 VAC with an included power supply module TrueSite Incident Commander function summary: Simplex fire alarm network connected graphical interface control Connects to the Simplex fire alarm Network as a node allowing access to remote panel activity status, and for a Mass Notification System event or a fire alarm event, can take control of remote panel activity over the fire alarm network Available TCP/IP, LAN/WAN connections; up to 20 remote clients can be connected to the server for multiple remote users; with dedicated and listed Fire Alarm LAN equipment, listed remote clients can have control access Supports standard fire service annunciation icons to provide firefighter and first responders with critical fire response information Custom alarm and system messages guide emergency responders with important information Color graphical annunciation and control capacity for up to 100,000 points Floatable and dockable windows allows windows to either be fixed (docked) or floatable Extensive historical logging; up to 500,000 events with operator notations Password Security supports 8 to 16 alphanumeric passwords with configurable lockout Optional interface to Digital Alarm Communicator Receiver (DACR) integrates multiple systems onto a single Incident Commander Backup Utility can be configured to automatically backup specified directories including TSW job data to the secondary hard drive. The backup utility is available to systems that do not use RAID. Multiple password controlled operator levels 3rd Party Interface open-architecture solution provides enhanced information access for advanced users Available optional connections for printers or other compatible systems Dual monitor support allows the Alarm List Window to be on one monitor and the Graphics Window on the other Operating Systems; Server and clients are compatible with Windows 7 & 10 Professional or Enterprise, Clients also compatible with Windows 7 Home Premium and Windows 10 Home (32-bit and 64-bit for all options) TrueSite Incident Commander Mounts in Bay 2 of a 4100ES Control Panel (shown with Master Controller) Desktop TrueSite Incident Commander Graphic screens details: Pan-and-zoom features allow precise navigation Configurable coverage zones allow highlighted areas of activity in user defined zones Auto-jump allows the screen view to jump to a graphic or alarm list menu Additional Incident Commander system features: TrueSite Workstation Mobile Client allows compatible ios and Android devices to access system information Export to XML feature allows TrueSite Workstation data to be easily exported for report generation and customization Test Mode allows unobtrusive testing of selective devices without nuisance interruptions Node Name allows a description of the specific building or area associated with a point in views and reports Vector information to supervised remote clients; select by point, event category, panel, or custom list generation is available to send updates to individuals or to distribution lists with selectable content Sound files (WAV) can be used to create custom audible status annunciation with Agency listed desktop PC model Fahrenheit or Celsius temperatures can be displayed * Refer to pages 5 and 6 for specific product listing details. CSFM Listing: :323. Additional listings may be applicable; contact your local Simplex product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Tyco Fire Protection Products. S /2017

2 Additional system features (Continued): DACR Account Filter allows Historical Log Reports to be Filtered by DACR Account for Quick Access and Verification Operator Notes allows an operator to log operator notes associated with individual events for historical records and retrieval Web Browser Command Link allows an external web page or link (web-cam, etc.) to be called with a single command RAID 1 Support provides a real-time mirror image on a secondary hard drive for enhanced life-safety workstation survivability. RAID support is available to systems that do not use the Backup Utility. Agency listings: UL 864 as Supervising Station Control Unit or Annunciator ULC-S527 as Fire Alarm System Annunciator UL 864 UUKL as Firefighter Smoke Control Station UL 2572, Mass Notification Systems, as Supervising Station Control Unit or Annunciator (see page 9 for details) UL 1076 as Proprietary Burglar Alarm Unit or Annunciator UL 1610 as Central Station Burglar Alarm Control Unit or Annunciator Simplex Fire Alarm Network capabilities: Multiple TrueSite Incident Commanders and TrueSite Workstations can be nodes on the same fire alarm network to provide redundant operations for improved survivability Standard fire alarm network connection for wired or fiber optic media Graphical network diagnostic tools Set-host service functions allow access to remote network node data including individual TrueAlarm analog sensors Provides event printing (with compatible printer), view or print of status and service report information, and print graphic screens (see page 7 for printing details) Please refer to TrueSite Workstation data sheet S for additional operation detail Description The TrueSite Incident Commander offers TrueSite Workstation operation in an all-in-one package providing a touchscreen computer, monitor, hard drive, and required input/output connections in single assembly. This allows installation within a 4100ES fire alarm control panel or remote annunciator with power supplied from the fire alarm power supply and secondary batteries. The all-inone computer is also available for desktop applications (requires separate AC power). Network Annunciation. TrueSite Incident Commanders provide annunciation, status display, and control for Simplex Fire Alarm Networks using a personal computer based graphical interface with a high resolution, color display. Response buttons with realistic icons provide control switches specific to the operation being performed. Remote Clients. For remote viewing of TrueSite Incident Commander Server information, remote clients are available and connected using TCP/IP LAN/WAN Ethernet communications. As discussed on pages 8 and 9, Remote Clients can be annunciation only, or capable of system control when configured with agency listed hardware. Description (Continued) DACR Compatible. For systems requiring information from remote control panels via DACTs (Digital Alarm Communicator Transmitters), Incident Commanders can be equipped to communicate directly with a compatible DACR. (Refer to data sheet S for more DACR details.) TrueSite Incident Commander Operation Operation. When fire alarm network status changes occur, the screen displays the type and location of the alarm (or other activity) and the appropriate header buttons appear. In the historical log screen on page 3, Figure 1, Fire, Priority 2, Supervisory, and Trouble buttons are shown with an active Trouble indicated. Sample Screens. Figure 1 (on page 3) is representative of a historical view screen. Figure 2 (on page 4) is representative of a system graphic screen with icons representing the devices of interest. Screen choices can be configured per system preference, however, when using an optional second monitor, both screen types can be visible for operator convenience. Ease of Operation. With touchscreen monitors, the operator selects the area in alarm to access a more detailed view of the alarmed zone or device. Where control operation is permitted by local listings, the authority having jurisdiction (AHJ), Civil Defense, or equal; and with proper password access, the operator can acknowledge alarm and trouble conditions, activate signal silence, and perform system reset directly from the Incident Commander screens. Programmable Activity Timeout allows an unattended monitor to revert to the login screen when the configured time period expires. Individual User Preferences appear when the user logs in. Options include: font size, toolbar size; interface theme (MS Office 2003 or system); floating window options (select whether to show menu bar or show tool bar). Historical Log and List Details. Figure 1 on page 3 shows historical log details. The display format is similar to the display for active list items such as the alarm list. Displayed information can be sorted on-screen by each category shown (number, time, date, point name, etc.). List information can be reviewed on the screen, printed at a local or remote system printer, or can be written to an electronic file for compatibility with spreadsheet and database programs. Customized Response. Custom alarm and trouble messages can be added and field edited to provide operator response assistance. Point specific information, such as hazardous material storage and lists of people to notify, can be automatically or selectively displayed. Password Control Multiple Access Levels. Operator access level is determined during log-in. Select functional access to match the training and responsibility of the operator. Operators with additional TrueSite Incident Commander and fire alarm network training may be qualified for access to sensitive areas. For operators who are primarily concerned with immediate facility security, a lower level access will provide the information necessary for proper response but will not allow access to key parameters that determine overall system/network operation. 2 S /2017

3 Graphics Screens Site and Floor Plan Details. Graphics screens can provide easily recognizable site plan and floor plan information. The level of detail can be customized for the specific facility to easily and accurately direct the operator to the immediate area of interest. Graphic Screen Controls. (refer to graphic screen on page 4) Icons can be added to identify the location and type of the device of interest and the graphics control toolbar (located at the top of the graphic) can be used to pan and zoom for more precise detail. Programmable coverage zones can be added with selectable area and zoom level. A fixed area site plan (key plan) with action buttons and screen locator can be added as shown. Pan and zoom are tracked by a green rectangle in the key plan. Custom Banner and Main Screen Background. The banner area shown with a Simplex logo in Figure 1 can be customized (bitmap area is 2250 x 68 pixels). The main screen background (viewable prior to login) can be customized with a bitmap of up to 1000 x 525 pixels. Action Messages. In addition to screen text or graphic information, the operator can be presented with specific action messages that provide emergency response information and directions. These action messages are easily field edited for local requirements. The appropriate action message would be located in an Acknowledge dialog box as shown in the graphics screen on page 4. Graphics Screens (Continued) Auto-Jump to Graphics or Alarm List. Select whether activity should cause a jump to a list format or to the associated graphic screen. Supported Graphics Formats: DWG Import Formats: AutoCAD R9, 10, 11-12, 13, 14, , , , DXF Import Formats: AutoCAD R14 and 2000 Export Formats: AutoCAD 2000 DWG/DXF format (allows editing in AutoCAD 2000 or later) Import drawing files: DWG, WGS, IMS/GCC DOC files, WMF, BMP, GIF, and JPG Individual Point Service Access Qualified Operator Detail Access. The Incident Commander operator s interface provides service level access to network information that is not normally public. Network private point information can be accessed using the Set-Host feature, and logging into the database of the network and node of interest. With this operation, individual point information can be accessed and controlled as required by qualified service personnel with proper password access. Figure 1. TrueSite Incident Commander Sample Alarm List Screen 3 S /2017

4 Seismic Testing The 4100ES cabinet mounted TrueSite Incident Commander design has been seismic tested and is certified to IBC and CBC standards as well as to ASCE 7 categories A-F. Requires use of battery brackets detailed on data sheet S Network Diagnostics Graphical Network Status Views. Automatic, built-in diagnostics are available to provide graphical views of Network topology and Network status. Missing communications links due to wiring breaks or shorts as well as inactive network nodes are indicated clearly to guide in returning the system to normal. Information screens are available to provide detail about each specific network node. Network level functions such as timekeeper node and monitor node are indicated as well as identification of the node being used for the diagnostic. Sample Graphic Screen Version Compatibility* Compatibility with TrueSite Incident Commanders requires the 4100ES, 4010ES or other panels per the following software versions. Fire Alarm Network Interface 4190 GCC/IMS/NPU Master Version 2.07 (or later) 4100U Master Version (or later) 4100 Master Version 9.02 (or later) 4020 Master Version 9.02 (or later) 4010 Master Version 3.01 (or later) Network Firmware Version (or later) 2120 (SLI) Interface Master Version 5.44 (or later) 2120 Network Interface Version 3.02 (or later) * TSW 100,000 point capacity applies to ES series panels or DACR points only. Other legacy 4000 series panels are limited to a capacity of 62,500 points on the TSW (can be mixed with ES series panels reporting above the 62,500 point range). A TSW with a 2120 SLI interface is limited to 62,500 points for the entire system (including ES series panels and DACR points). TSW 100,000 point capacity requires TSW Version 3.04 (or higher) and ES Panels at Version (or higher). Figure 2. TrueSite Incident Commander Sample Graphic Screen with Detail Enlargement and Acknowledge Box (Note: This sample graphic screen demonstrates heat sensors (HS) dynamically displaying their local temperature readings) TrueSite Incident Commander Desktop Dimension Reference 4 S /2017

5 TrueSite Incident Commander Product Selection Category Model Description Listings TrueSite Incident Commander Annunciator UL ULC Listings: For use as an Annunciator under: UL 864 and ULC-S527 Control Units Yes Yes and Accessories for Fire Alarm Systems; UL 2572 Control and Communication Units for Mass Notification Systems, UL 1076 Proprietary Burglar Alarm Units and Systems; and UL 1610 Central Station Burglar Alarm Units. Also for use as UL 864 UUKL Firefighter Smoke Control Station TrueSite Incident Commander Supervising Station Control Unit Yes No Listings: For use as a Supervising Station Control Unit under UL 864. Reports Hardware Systems (select as required see notes) and logs events; if an optional event printer is also desired see page 8 for printer information; if using a DACR for UL 864 listing select the Bosch D6600 with CID format. Also for use as UL2572 Supervising Station Control Unit for Mass Notification Systems; UL 1076 Proprietary Burglar Alarm Multiplex Receiving Unit; and UL 1610 Central Station Burglar Alarm Control Unit with listed DACR (see below for details) TrueSite Incident Commander Remote Client; agency listed control capability requires supervision and connection to a dedicated Fire Alarm LAN (refer to data Yes Yes sheet S ) Listings: For use as an Annunciator under: UL 864 and ULC-S527 Control Units and Accessories for Fire Alarm Systems 1. Requires selection of computer and software from list below 2. LAN/WAN connections require use of Transient Suppressor (ordered Notes All above separately, see page 6 for details) 3. A UL-1481 Listed Uninterruptible Power Supply (UPS) is required for secondary power per UL and ULC requirements (ordered separately, supplied by others) Category Model Description Aftermarket Additions Aftermarket hardware addition Aftermarket software addition Computer Type (select one as required) Applications Software (select one per application) Server Feature Option ES Cabinet Mount; computer for mounting into an existing 4100ES Fire Alarm Control Unit cabinet; 4100ES boxes, doors, and dress panels are ordered separately, see hardware reference below for model numbers. PCs are pre-installed with Windows 10 Enterprise 64 bit (includes CD and license) and TrueSite Workstation software (dongle not included) is configured with a file Backup utility and no RAID controller is configured with RAID 1 mirroring and no file Backup utility (power supplied from 4100ES control unit power supply and secondary batteries). Desktop PC; PCs are pre-installed with Windows 10 Enterprise 64 bit (includes CD and license) and TrueSite Workstation software (dongle not included) has a RAID 1 controller configured has a backup utility and no RAID controller (requires separate AC power, not ULC listed). Aftermarket PC; Computer without application software and operating system. Use for replacement of existing Incident Commander PCs (desktop or 4100ES cabinet mount) where the existing application software and operating system are available to be installed on-site. 19 Touchscreen computer/ monitor with UL I/O Card, compact keyboard and mouse TrueSite Incident Commander Server Software, includes: License, Security Dongle, Documentation; requires or TrueSite Remote Client Installation CD, no operating system; requires or DACR Interface for a TrueSite Workstation Server 3rd Party Interface Software Package; includes: (1) 3rd Party Interface Development Software; (2) A dedicated Security Certificate allowing server and client access for one 3rd Party Interface Application; and (3) A 3rd Party Feature Code allowing one 3rd Party Client connection to a single TrueSite Workstation; Note: A Software Customer Information Form is required to be submitted with the order TrueSite Workstation Feature Upgrade; includes the latest TrueSite Workstation software version and an Upgrade Feature Code to enable new standard features (new optional features are selected separately); without this upgrade, installing the latest software version provides updated performance improvements over previous versions but does not include new standard software features TrueSite Workstation Mobile Client Feature; quantity of (1) enables TrueSite Workstation information to be accessed from compatible mobile devices; access for mobile clients is enabled by entering an authorized feature code at the server; see data sheet S for more information 5 S /2017

6 TrueSite Incident Commander Product Selection (Continued) Category Model Description Remote Client Type Selection (Select One Per Remote Client) Serial Port Option (for Server only) Transient Suppressed Connectors (select as required) Internal PCI Card Options (Workstation Server only, select as required, two maximum) Media Modules for Modular Network Interface (as required) Feature code for Remote Client with restricted features (reduced feature set) Feature code for Remote Client with password protected feature access 3rd Party Interface Client for adding additional 3rd Party Client connections to an existing TrueSite Workstation 3rd Party Interface; includes a 3rd Party Client Feature Code for the selected quantity of concurrent 3rd Party Client Connections to a single TrueSite Workstation (maximum of five (5) per server) Note 1: When adding 3rd Party Interface Clients to more than one TrueSite Workstation Server, each server requires its own Remote Client Selection; if a new 3rd Party Interface Application is being developed, feature code will be required to provide a unique Security Certificate. Note 2: A Software Customer Information Form is required to be submitted with the order. Quad RS-232 Serial Port PCI Card, select when more than two serial ports are required; PCI Slot card with pluggable terminal block output; one suppressor is require per connection (see below) Transient Protected Connector, select one per connection to a standard PC RS-232 serial port Transient Protected Connector for Quad Serial Port Card; one required per connection Transient Suppressor for LAN/WAN Connection; required for agency listing for each Incident Commander and Remote Client LAN/WAN connection, except for server to client connections when both are in the same room Configured Aftermarket Description Modular Network Interface Module (select Media Modules separately, listed below); PCI Slot card Wired Media Select one per input and one per output media type, per Modular Network Interface; mounts onto Modular Network Fiber Optic Media Interface (see above) Category Model Description Programming (select) TrueSite Incident Commander Programming; select Programming Items below Programming Items (select items per system requirements; select quantity of items as required) requires selection of AutoCAD DXF or DWG file, one floor plan (multiple floor plans require dedicated files) Custom Action Messages Travel Screen Keys (selective zooming) Status Icons Control Functions; On/Off, Bypass, etc Convert one (1) Existing IMS Screens to TrueSite Incident Commander Screen Coverage Zones; order quantity as required One (1) Emergency Communications/Mass Notification Control Screen Hardware Reference for Mounting TrueSite Incident Commander in Bay 2 of a 4100ES Fire Alarm Control Panel Required Identifier Designates that the 4100ES fire alarm control panel is to be shipped with bay 2 empty Selection Type Description Platinum 2 Bay Platinum 3 Bay Red 2 Bay Red 3 Bay Combined Box and Door Box with Glass Door & Dress Panel Separate Box and Door (select if boxes and doors are required to be shipped separately) Remote Annunciator Panel Option Model Box only Glass Door & Dress Panel Description Remote Annunciator Panel Mount; includes expansion bay with power distribution interface module (PDI); Bay 2 is dedicated for Incident Commander, order box and door separately ( is not required); Select: RPS Remote Power Supply and Basic interface; also allowed: Phone Cards, Phone Class A Adapters, RS-232 Card, Panel Mount Printer, and Point I/O; order cabinet hardware separately per hardware for control panels above; refer to data sheet S for more Remote Annunciator details; Note: Refer to page 9 for power supply applications guidelines 6 S /2017

7 TrueSite Incident Commander Equipment Specifications (Please note that equipment and specifications may vary due to equipment design changes) Panel Mount Touchscreen Computer/Monitor (Note: Refer to page 9 for power supply applications guidelines) Model* Space Requirement Current Requirements with 24 VDC Power from Control Panel or with Modules Listed Supervisory Alarm Mounts in bay 2 of a 2-bay or 3-bay 4100ES cabinet Individual Module Current Reference Desktop Touchscreen Computer/Monitor Model* Dimensions (see diagram on page 6) Input Power W x H x 8 ¾ D (452 mm x 425 mm x 221 mm) with 1 Network Card 2.1 A 2.25 A with 2 Network Cards with 1 Network Card and 1 Quad Serial Card 2.37 A 2.52 A Quad Serial Card 270 ma / Modular Network Card with two media modules, either / Wired, or / Fiber VAC, 60 Hz (240 W) Operating Range: VAC, 50/60 Hz 270 ma * All models include a separate 120 VAC power supply module. It provides normal power for desktop operation and can be used for separate pre-installation setup for 4100ES cabinet mount models. A 120 VAC cord is included; NEMA 5-15P plug to IEC-320 C-13 connector. For 230/240VAC use, locally obtain a cord in compliance with local safety standards. Note: Agency listing is at 120 VAC, 60 Hz. TrueSite Incident Commander Computer Feature Summary** General Specifications i5 2.4 GHZ (minimum) PC with cooling fan (4) GB RAM (minimum) (2) PCI Slots (2) 500 GB Hard Drives (minimum) (1) DVD/RW Drive TrueSite Incident Commander Server Computer Port Reference** RS-232 Serial Ports USB Serial Ports Ethernet Ports PCI Slots Event Printing* Other Printing* Printable Information (2) Integral Amplified 2 Watt Speakers (1) VGA Video Output (required for optional 2nd monitor) Includes compact USB keyboard and mouse 100 mm VESA Mounting Interface Two DB9 RS-232 ports standard, up to six RS-232 ports total with optional Quad Serial Port Card (PCI Slot Module) Six total; five in the rear (one is used for Server Security Dongle), and one on the side Two RJ45 Gigabit Ethernet LAN ports Two available; Note: Server uses one for the Network Interface Card For agency listed proprietary supervising station operation and for other operations, if an event printer is desired, a supervised and dedicated Simplex model agency listed dot matrix printer is recommended; connection is to USB, or Serial RS-232 port of the Server PC (see data sheet S for printer details) For report, screen, or graphics printing, a Windows 7 compatible printer may be used; connection may be USB, Serial RS-232, or LAN/WAN connection via Ethernet Event printing (with supervised and dedicated dot matrix printer as explained above) Auto-print of auto-jump graphics; prints to Windows default printer Reports: Historical logs, System Activity, TrueAlarm Status, TrueAlarm Service, Analog Monitor ZAM Calibration, and Active List; displayed reports can print to a LAN connected (unsupervised) printer Screen captures (configurable as negative images to reverse black backgrounds) ** PLEASE NOTE: Simplex 4190 Series TrueSite Incident Commander computers are Agency listed for use with TrueSite Workstation software. For Desktop applications where Agency listings are not required, TrueSite Workstation software should be compatible with most computers meeting the stated minimum specifications. However, due to computer manufacturers potentially using unique and/or proprietary drivers, hardware, or other software not tested with TrueSite Workstation software, there may be incompatibilities. If other computers are used, proper operation with TrueSite Workstation software may require technical adjustments by a qualified computer technician and would be the sole responsibility of the computer supplier and computer manufacturer. Environmental Specifications Operating Temperature 32 to 120 F (0 to 49 C) Operating Humidity up to 93% RH, non-condensing, at 90 F (32 C) * Note: Parallel port printer connection is supported on 32-bit operating systems only. 7 S /2017

8 Fire Control Server/Client Operation TrueSite Incident Commander Computer. The TrueSite Incident Commander computer provides the functions of the Server and the system configuration tools. To access the desired features, a system/job specific security service dongle is supplied and is required. For systems not using Remote Clients, the setup of the TrueSite Incident Commander PC is similar. Remote Client. For access to TrueSite Incident Commander information at a remote location, a compatible computer, connected via a Local Area Network (LAN) is equipped with Remote Client software. There are two types of Remote Clients, those with a restricted feature set (not capable of control); and those with a password protected feature set (capable of control). Refer to data sheet S for additional information about creating a proprietary fire alarm remote client LAN. Supervised or Unsupervised Remote Clients. Remote Clients can be designated as Supervised or Unsupervised. When Supervised, the connection is monitored by the TrueSite Incident Commander and a loss of connection is audibly reported at both ends along with a dialog screen. When unsupervised, only the client end displays a trouble dialog indicating disconnection from the Server. Remote clients may be laptop computers or other computers used for other functions and are periodically connected to query system status or create reports. (Refer to TrueSite Workstation data sheet S for additional Remote Client information.) Remote Client Connections. The TrueSite workstation server supports a maximum of twenty (20) Supervised or Unsupervised remote clients, each capable of being on-line simultaneously. (Server/Client Operation is continued next page) System Overview Reference Desktop TrueSite Incident Commander TrueSite Workstation Fire Alarm Network Loop with compatible Simplex Fire Alarm Control Panels Fire Alarm Control Panel with TrueSite Incident Commander Optional Remote Monitor Connection To second Fire Alarm Network Loop (if required) Facility LAN Facility Fire Alarm Maintenance Center (restricted client) Internet Connection Off-site access (restricted client) 8 S /2017

9 Server/Client Operation (Continued) TCP/IP Networks. The minimum recommended connection speed for TrueSite Incident Commander Server or Remote Client to a TCP/IP local area network is 3 Mbps. Anti-Virus Software. When either the TrueSite Incident Commander Server or Remote Client computer is connected to a TCP/IP network other than a dedicated Fire Alarm network, it is highly recommended that regularly updated anti-virus software protection be installed on each connected computer. The TrueSite Incident Commander has been verified as compatible with Symantec EndPoint Protection and McAfee Enterprise 8.8. System Listings Reference The following functions are agency listed with the computers and monitors identified under Product Selection on page 5: TrueSite Incident Commander PCs, whether stand-alone or functioning as a server to local and remote clients Supervised Remote Clients with protected features that are connected to the server using a dedicated Fire Alarm Network as described on page 8 Refer to data sheet S for details about Fire Alarm Network Ethernet Switches Additional agency listings reference: Restricted feature remote client software on compatible computers (listed for standard office use) provide annunciation features only and can be connected using a facility LAN with system listing impact Power Supply Application Reference When the TrueSite Incident Commander is panel mounted, the following power supply applications guidelines apply. 1. The power supply used to power the TrueSite Incident Commander must be dedicated to the TrueSite Incident Commander and internal card power only. 2. IDNet communications, Signal power, or Auxiliary (aux) power loads must be connected to a separate expansion power supply. Additional Reference Description Document TrueSite Workstation Data Sheet S ES Basic Panel Reference Data Sheet S TrueSite Workstation Desktop Installation and Detailed Checkout Instructions TrueSite Workstation Operation and Application instructions TrueSite Workstation Software Upgrade Instructions TrueSite Workstation Configurator Reference Manual TrueSite Workstation Quick Reference Operator Instructions TrueSite Workstation Parts List Localization Procedure TrueSite Incident Commander Installation Instructions for mounting in 4100ES cabinet Release Notes TSW Mobile Client User Guide TrueSite Workstation 3rd Party Interface Software Customer Information Form Smoke Management Application Guide Mass Notification Systems Reference The TrueSite Incident Commander operates as a UL 2572 listed Fire Smoke Control Station (FSCS) when configured per the following: 1. Select model (Note: Cannot be used for Supervising Station or Security Monitor applications) 2. Provide an audio system microphone mounted adjacent to the TrueSite Workstation, either located within a 4100ES (or 4100U) Fire Alarm Control Panel or Remote Annunciator Panel, or use a Remote Microphone Assembly. 3. The 4100ES/4100U microphone options are Model for Fire Alarm Control Panels and Model for Remote Annunciator Panels (refer to data sheet S for details). 4. Remote Microphone Assembly Model mounts separate from the control panel (refer to data sheet S for details). 5. Note: At least two monitors must be connected to provide the necessary display information (see exception below). One monitor is required to display the speaker zone status and the other monitor is required to display the event screen. 6. Exception: If a 4100ES/4100U Network Display Unit (NDU) is mounted adjacent to the TrueSite Workstation for network audio control with microphone access, a second monitor may not be necessary if the audio control status is viewable. Review the application with the local authority having jurisdiction (AHJ). 9 S /2017

10 This page left intentionally blank. TYCO, SIMPLEX, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. Microsoft and Windows are trademarks of Microsoft Corporation in the United States and/or other countries. AutoCAD is a trademark of Autodesk, Inc. Symantec is a trademark of Symantec Corporation. McAfee is a trademark of McAfee Inc. Tyco Fire Protection Products Westminster, MA USA S / Tyco Fire Protection Products. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice.