Infrared Ceiling Mount Sensor
|
|
- Georgia Osborne
- 5 years ago
- Views:
Transcription
1 Infrared Ceiling Mount Sensor 69655c The LOS-CIR Series passive infrared ceiling-mount sensors can integrate into LutronR systems or function as stand-alone controls using a LutronR power pack. The sensor uses a small semiconductor heat detector that resides behind a multi-zone optical lens. The detector is sensitive to the heat emitted by the human body. In order to trigger the sensor, the source of heat must move from one range of detection to another. Non-moving hot objects will not cause the lights to turn on. Features Intelligent, continually adapting Passive Infrared (PIR) sensor Passive Infrared (PIR) sensing Reliable motion detection with high error immunity Snap-locks to ceiling-mounted cover plate Non-Volatile Memory: settings saved in protected memory are not lost during power outages 50 ft( to 500 ft( ( m( to 0 m() coverage when mounted on an 8 ft to ft (. m to.7 m) ceiling Affords choice of turning lights off or dimming to a preset level in the unoccupied state when integrated with a LutronR system. Models Available Model Color Coverage Field of View LOS-CIR-50-WH White 50 ft( ( m() 60 LOS-CIR-500-WH White 500 ft( (0 m() 60 Self-Adaptive Feature The LOS-CIR Series sensors provide reliable detection with high error immunity. The internal microprocessor analyzes the information from the PIR technology and determines the optimum setting to use in order to properly cover the space.
2 Specifications 69655c Regulatory Approvals ULR and culr listed Operating voltage: 0 V-, IEC PELV/NECR Class Operating current: ma nominal Control output: 0 V- active high logic control signal with short-circuit protection, open collector when unoccupied Environment Temperature: F to 0 F (0 C to 0 C) Relative humidity: less than 95%, non-condensing For indoor use only Timer Adjustment Automatic mode: Continually adapting sensor automatically adjusts settings to the space Manual mode: 8 to 0 minutes Test mode: 8 seconds LED Lamp : infrared motion detected Housing Rugged, high-impact, injection-molded plastic Color-coded leads 6 in (5 cm) Adaptive Functions Installation: 60 minutes Learning: weeks for response to error conditions, air current adaptation, and timer optimization Post-learning occupancy periods hour circadian occupancy periods learned Weekly occupancy periods learned Adjustments in post-learning period Generally occupied periods (threshold = high-sensitivity mode) Generally unoccupied periods (threshold = miser mode) Dimensions. in (8 mm).5 in ( mm) Front View Side View
3 Wiring: System Control 69655c packs may be required when interfaced to LutronR lighting control systems. If more than occupancy sensor is connected to the same input, a power pack is required. A maximum of occupancy sensors can be connected to the same input. If more than sensors are required per input, use one of the following models: LOS-CDT-500R-WH, LOS-CDT-000R-WH, or LOS-CDT-000R-WH. Supply Options LutronR Lighting Control System Digital microwattt EcoSystemR Energi Savr NodeT GRAFIK 5000T/6000R/7000T GRAFIK EyeR 000/000 GRAFIK EyeR QS HomeWorksR HomeWorksR QS LCP8T microwattr QuantumR RadioRAR RadioRAR Softswitch8R Pack Required? No No No, when used with seetouchr wallstations with occupancy sensor connections. No, when used with seetouchr wallstations with occupancy sensor connections. No No, when used with seetouchr wallstations with occupancy sensor connections. * Some system components do not supply external power for occupancy sensors. Refer to individual product specifications for more information.
4 Wiring: Stand-Alone Control 69655c to Sensors with Pack Line 0 / 77 / 7 V~ 60 Hz; 0 V~ 50 / 60 Hz Neutral (+0 V-) Blue (signal) (common) Pack White Lighting Load NOTE: Maximum occupancy sensors. Switching Multiple Loads with Auxiliary Packs Line 0 / 77 / 7 V~ 60 Hz 0 V~ 50 / 60 Hz Neutral Lighting Load Auxiliary Pack (+0 V-) Blue (signal) (common) Pack White Lighting Load NOTE: Maximum of devices total (occupancy sensors and auxiliary power packs) can be connected to a power pack.
5 Installation 69655c Sensor Setup Sensor setup is available as a service by Lutron. For more information see the Sensor Layout and Tuning service document (LutronR P/N 605). Sensor Placement The occupancy sensor must have an unobstructed view of the room. Do not mount behind or near tall cabinets, shelves, indirect hanging fixtures, etc. Do not place sensor within ft (. m) of air vents, air handlers, windows, fans, etc., as this may cause false triggering. Closely follow the diagrams shown concerning major and minor motion coverage. The sensor can detect major motion (e.g. person taking a half-step) at a greater distance than it can detect minor motion (e.g. writing at a desk or reading a book). May not detect occupancy with no significant difference between ambient and body temperatures. Range Diagrams Major motion detection Minor motion detection 6.5 ft (.9 m) ft (.7 m) LOS-CIR-50 ft (.7 m) ft (6.7 m) LOS-CIR-500 5
6 Mounting 69655c Normal Mounting Twist and lock threaded mounting post onto cover plate. Drill through ceiling tile with assembly, using cutter end of the threaded mounting post. Secure with washer and nut. Mounting to Non-Standard Ceiling or Fixture Mount twist-lock cover plate using mounting screws, nuts, and washers (included). Drill/punch wire routing hole through ceiling tile at center of cover plate. /6 in ( mm) Cutter end Mounting Plate Dimensions 0.5 in (. mm).5 in (6 mm). in (06.6 mm) Wire Lengths Number of Sensors Number of Auxiliary Packs AWG 750 ft 75 ft 50 ft 75 ft 50 ft 50 ft 0.5 mm( 65 m 80 m 0 m 90 m 0 m 0 m 0 AWG 00 ft 600 ft 00 ft 600 ft 00 ft 00 ft 0.75 mm( 70 m 65 m 0 m 65 m 0 m 65 m 8 AWG 00 ft 00 ft 800 ft 00 ft 800 ft 800 ft Using the Infrared Mask Typical Mask Patterns Conference Room Mask 80 Mask Full Mask Center Ceiling Mount (Mask blocks sensor seeing out doorway into hall) Corner Ceiling Mount (No mask needed) Rectangular Areas Over the Door Specific Areas You Wish to Mask 6
7 69655c Sensor Adjustments Override Settings Auto/Manual Threshold LED Motion Indicator Reset Learned Settings A Off (Default) Automatic (Normal) Auto Threshold Adjustment Lights indicate motion Retain Settings (Normal) On Manual on / off (Override) High Sensitivity (Low turn-on threshold) Disable LED Indicator Erase all learned settings; Restart Learning (Toggle On) OFF Strong Airflow Compensation Over Doorway Installation Timer Adjust Auto Sensitivity B Off (Default) Disable Compensation (Normal) No (Normal) Adjust Timer Automatically Adjust Sensitivity Automatically On Enable Compensation (Use increased turn-on threshold) Use Manual Setting (No adjustment) Adjust Sensitivity Manually OFF Timer Test Mode Factory Settings. Remove the retainer cover.. Rotate the black timer adjustment knob to about midway ( o clock).. Return setting to minimum setting (full CCW). : Infrared sensitivity 75% default A B Factory Settings o clock Full CCW : Timer 8 min NOTE: The timer will remain in the 8 second test mode for hour, then automatically reset to 8 minutes.. To manually take the timer out of the 8 second test mode, turn the timer adjustment approximately /6 in (.5 mm) clockwise to make the setting slightly above minimum (just above the 8 minute setting). 7
Infrared Ceiling Mount Sensor
Infrared Ceiling Mount Sensor LOS-CI Series LOS-CI- 0.0.06 The LOS-CI Series ceiling-mount passive infrared sensors can integrate into Lutron systems or function as standalone controls using a Lutron power
More informationInfrared Wall Mount Occupancy Sensor
LOS-WI LOS-WI-1 02.01.06 Infrared Wall Mount Occupancy Sensor The LOS-WI wall-mounted passive infrared sensor is used in spaces with pendant fixtures, ceiling fans, or high ceilings (more than 12 feet).
More informationWireless Wall-Mount Sensor
Wireless Wall-Mount Sensor 369-268 1 06.29.10 Lutron wall-mounted occupancy and vacancy sensors are wireless battery-powered passive infrared (PIR) sensors that automatically control lights via RF communication
More informationDual Technology Wall Mounted Occupancy Sensor. Manual & Specification
Dual Technology Wall Mounted Occupancy Sensor Manual & Specification PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH LOCAL ELECTRICAL CODES Douglas Lighting Controls Page 1 December 16, 2013 1. INTRODUCTION
More informationInstallation Instructions
DT-300 360 Dual Technology Low Voltage Occupancy Sensor with Light Level, Isolated Relay and Manual On features Specifications Voltage................18-28VDC/VAC, half wave rectified AC Current Consumption...............................43mA
More informationDual Technology Wall Switch Occupancy Sensor. Manual & Specification
Dual Technology Wall Switch Occupancy Sensor Manual & Specification PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH LOCAL ELECTRICAL CODES Douglas Lighting Controls Page 1 November 19, 2014 1. INTRODUCTION
More informationv3 360 Dual Technology Low Voltage Occupancy Sensor with Light Level, Isolated Relay and Manual On feature
DT-300 v3 360 Dual Technology Low Voltage Occupancy Sensor with Light Level, Isolated Relay and Manual On feature Specifications Voltage...18-28VDC/VAC, half wave rectified AC Current Consumption...25
More informationWireless Wall-Mount Sensor
Wireless Wall-Mount Sensor 369-481a 1 01.17.12 LutronR wall-mounted occupancy and vacancy sensors are wireless battery-powered passive infrared (PIR) sensors that automatically control lights via RF communication
More informationDS160/DS161 Request To Exit PIR sensors Installation Instructions
DS160/DS161 Request To Exit PIR sensors Installation Instructions 1.0 Description The DS160 is a Passive Infrared Detector (PIR) which is UL Listed as an Access Control Device under the UL 294 Standard.
More informationCeiling-Mounted Motion Detector. 752/CD, 752/CP, 752/CU and 752/Cx180. Installation Instructions
Ceiling-Mounted Motion Detector 752/CD, 752/CP, 752/CU and 752/Cx180 Installation Instructions Contents 1.0 Description...3 1.1 Contents of the Box...3 2.0 Safety...4 3.0 Coverage Patterns...4 3.1 PIR
More informationCeiling-Mounted Wireless Occupancy/Vacancy Sensor
Project name Prepared by Date INDOOR AIRLINK enabled by Lutron Catalog #: ALW OS/VS CM Part #: 624094 624615 The Ceiling-Mounted Wireless Occupancy & Vacancy Sensors are wireless, battery- powered, passive
More informationDS160/161 Request To Exit PIR sensors Installation Instructions
DS160/161 Request To Exit PIR sensors Installation Instructions 1.0 Description The DS160/161 is a passive-infrared (PIR) detector designed for request to exit (REX) interior applications. It is UL Listed
More informationPSC-ID-x-CM Series Ceiling Mount Occupancy Sensor
TECHNICAL SPECIFICATIONS PSC-ID-x-CM Series Ceiling Mount Occupancy Sensor Basic Features Line voltage version: 120-277VAC, 60Hz Low voltage version: 24VDC, requires separate class 2 power supply PIR sensor
More informationPassive Infrared (PIR) Wall Switch Occupancy Sensor Dual Circuit
Instruction Bulletin 63249-420-418A1 02/2014 Passive Infrared (PIR) Wall Switch Occupancy Sensor Dual Circuit Commercial Grade with Ground SLSPWD1277C Retain for Future Use INTRODUCTION The Passive Infrared
More informationWireless Wall-Mount Sensor
Wireless Wall-Mount Sensor Lutron wall-mounted occupancy and vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights via RF communication to compatible
More information64.7 Ø85. (1) Sensor inset (2) Lens pluggable. (3) Protection cover (covers the high-voltage terminals). (4) Ceiling (drill hole Ø70mm).
Flush Mount PIR Motion Sensor PIR 1-10V Dimming with Remote Control Mechanical Structure 70mm 64.7 4 56 68.1 73.3 Ø85 3 (1) Sensor inset (2) Lens pluggable Infrared receiver 1 Photocell LED indicator (3)
More informationViveTM Basic Packages
ViveTM Basic Packages 369912a 1 11.10.15 The ViveTM Basic Package incorporates Maestro load controls and wireless sensors which provides a system that delivers energy savings, convenience, and ease of
More informationDS9370-BEL. Installation Instructions TriTech Ceiling Mount PIR/Microwave Intrusion Detector
DS970-BEL EN Installation Instructions TriTech Ceiling Mount PIR/Microwave Intrusion Detector DS970-BEL Installation Instructions.0 Installation Considerations.0 Installation Considerations Not suitable
More informationVive PowPak Fixture Controls
Vive 369918g 1 03.12.18 The PowPak wireless fixture control is a radio-frequency (RF) device that controls either the Lutron EcoSystem or 0 10 V- electronic fluorescent ballasts and LED drivers (depending
More informationOccupancy Sensor LS Descriptions. Product Profile. Technical Specifications
LS-818-3 Descriptions Temco s Passive Infrared Occupancy Sensor is a low cost comercial and residential surface mount occupancy sensor. Advanced filtering reduces false triggering due to air movement and
More informationHUNTERSVILLE, NORTH CAROLINA USA EFFECTIVE SEPTEMBER 1, 2004
HUNTERSVILLE, NORTH CAROLINA USA EFFECTIVE SEPTEMBER 1, 2004 EPA Green Lights A L L Y USE OF THIS LOGO DOES NOT IMPLY EPA ENDORSEMENT APRIL 2008 www.nsiindustries.com E-mail: nsi@nsiindustries.com Fax:
More informationVESICA LINEAR SUSPENDED VES L
PROJECT INFORMATION Project Name Catalog # VESICA LINEAR SUSPENDED APPLICATIONS Office Spaces Conference Rooms Municipal Facilities Medical Facilities Type Date Financial Institutions Retail Spaces Hospitality
More informationSensors and Detectors
12/12/2017 Sensors and Detectors - Clipsal by Schneider Electric Sensors and Detectors Add sensors and detectors to make an environment smarter and more efficient. C-Bus sensors and detectors allow environmental
More informationInstallation Manual. Features SMART SWITCH OCCUPANCY SENSOR. Maximum Versatility. Maximum Energy Savings
Features SMART SWITCH OCCUPANCY SENSOR Installation Manual Maximum Energy Savings Maximum Versatility Sensitive 140 view passive infrared motion detector keeps lights on only when rooms are in use. Switches
More informationEver evolving energy code requirements and the large demand for energy
Ever evolving energy code requirements and the large demand for energy saving products have made lighting control sensors a must-have for building owners and managers. Hubbell Control Solutions introduces
More informationD-TECT Introduction. Connecting the Unit. Quick Installation. Multi Beam Alignment & Masking. Mounting the Unit
D-TECT 2 GJD300 Quad PIR Movement Detector Package Contents Package Contains: 1 x D-Tect 2 1 x Drilling template for fixing holes 3 x 31.75mm wall plugs 3 x 31.75mm screws 2 x Spare Sliding Curtains 2
More informationInstallation Instructions
Specifications PW-100 PW-200 PW-100/PW-100-347/PW-200/PW-200-347 v3 Passive Infrared Wall Switch Occupancy Sensor PW-100-347 PW-200-347 Voltages: PW-100 & PW-200................ 120/277VAC, 50/60Hz PW-100-347
More informationFCSENS0R Occupancy Sensor. Long Description. Manufacturer Information. Taxonomies, Classifications, and Categories
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Descriptions Description Long Description Product
More informationTOCR02 2 PART MICRO MOTION SENSOR W/IR REMOTE CONTROLLER
TOCR0 PART MICRO MOTION SENSOR W/IR REMOTE CONTROLLER SAFETY PRECAUTIONS Be sure to switch off power source before installing. Make sure that the power wiring comes from circuit with an external 16A miniature
More informationMaestro 0 10 V Dimmer Sensor
NEW Maestro 0 10 V Dimmer Sensor Setting the new standard for 0 10 V control 0 10 V Dimmer Sinking control for 0 10 V fluorescent and LED fixtures Passive Infrared (PIR) Sensor Fine motion detection with
More informationBryant Evolution Connex Control (SYSTXBBECC01-B) Occupancy Sensing Sequence of Operation
For Software Versions 1.1, 1.2 Integrated motion sensor allows the system to make automatic set point changes, based on occupancy, to provide the optimum home comfort and energy savings. For Software Versions
More information, ,
796-2028, 796-2021, 796-2025 Batten mount PIR detectors Overview This series of miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional manual control
More informationPRODUCT DATA AND INSTALLATION SHEET MWS5-SA STAND ALONE MINIATURE CEILING MOUNTED MICROWAVE PRESENCE DETECTOR
8. SPECIFICATION LOAD 6 Amps fluorescent and incandescent lighting. 3 Amps compact fluorescent lighting. 3 Amps low energy lighting. 3 Amps low voltage lighting (switch primary of transformer). Switch
More informationWireless Occupancy Sensor, Ceiling Mount (WOS2-CM)
21233 Wireless Occupancy Sensor, Ceiling Mount Installation Instructions The Daintree Networks ceiling mounted Wireless Occupancy Sensor operates seamlessly within the ControlScope Manager (CSM), the Daintree
More informationLPCMPIRM65 & LPCMPIRDSI65
Product Guide LPCMPIRM65 & LPCMPIRDSI65 Luminaire high mount PIR detectors Overview The LPCMPIR PIR (passive infrared) presence detector provides automatic control of lighting loads with optional manual
More informationTable of Contents. Fast Fact. Sensor Models 2 Advantages of Sensors 3 FAQs 4-5
Sensor Buying Guide Table of Contents Sensor Models 2 Advantages of Sensors 3 FAQs 4-5 Occupancy and Vacancy Sensors, which provide automatic switching of lighting and motor loads, are fast becoming a
More informationCeiling Mount Sensors B4-B9. Occupancy and Vacancy Sensors B10-B15 B16-B17. Wall Mount Occupancy Sensors B-1
Occupancy and Vacancy Sensors ENERLITES offers a wide variety of lighting sensors. They are designed to bring convenience to your life and business while helping to reduce energy consumption in commercial,
More informationPIR/INT & PIR/INT-D. Batten mount PIR detectors. Product Guide. Overview. Features
Product Guide PIR/INT & PIR/INT-D Batten mount PIR detectors Overview The PIR/INT & PIR/INT-D miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional
More informationFR-A180 FR-A360. Occupancy detector. Use
5 488 Occupancy detector with daylight sensor Occupancy detector with integral daylight sensor for demand-based control of HVAC systems and lighting. Adjustable switch-on and switch-off delay Adjustable
More information2025 Lavoisier, #135 Quebec, Quebec G1N 4L6 T F E. cristalcontrols.
2025 Lavoisier, #135 Quebec, Quebec G1N 4L6 T. 418 681-9590 1 800 681-9590 F. 418 681-7393 E. info@cristalcontrols.com cristalcontrols.com TM Index Quick Selection...3-4 Which Technology to use...4 Retrofit
More informationDual Relay Multi-Technology Wall Switch Occupancy Sensors
Dual Relay Multi-Technology Wall Switch Occupancy Sensors The OSSMD line of dual relay multi-technology Decora style wall switch occupancy sensors features several models to provide automatic lighting
More informationInstallation Instructions
HB-15NB High Bay Line Voltage Passive Infrared Occupancy Sensors with Nipple Backbox SPECIFICATIONS HB-15NB Power Module Voltages.............................12/277VAC, 6Hz Load Requirements @ 12VAC, 6Hz.............-8W
More informationDocument # R01
Viconics VT7600 Series PIR-Ready Rooftop Unit Controllers Part 1 General The VT7600 series is designed for single-stage and multi-stage control of heating/cooling equipment such as rooftop and self-contained
More informationEBMPIR-MB. Batten mount PIR detectors. Product Guide. Overview. Features
Product Guide EBMPIR-MB Batten mount PIR detectors Overview The EBMPIR-MB series of miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional manual
More informationLighting Control Strategies. to meet code requirements save energy and improve building performance
Lighting Control Strategies to meet code requirements save energy and improve building performance 1 Lighting Control Strategies Agenda Why Lighting Control Manual Light Reduction Scheduling Occupancy
More informationTechnical Application Guide
Lighting Control Wireless Occupancy Sensor, Wireless Multi Sensor Technical Application Guide Philips wireless occupancy sensor and multi sensor, which are Interact Ready, mean easy upgrade to a smart
More information180 Degree Ceiling Mounted Occupancy Sensors
Instruction Bulletin 63249-420-386A 2/202 80 Degree Ceiling Mounted Occupancy Sensors PS-CDS800 and PS-CUS800 INTRODUCTION The 80 Degree Ceiling Mount Occupancy Sensors are ideal for use in business and
More informationModel: MLSA360N. Installation & Operating Instructions. 360º Night Eye PIR Light Controller
Model: MLSA360N Installation & Operating Instructions 360º Night Eye PIR Light Controller Motion Sensor Detection Perspective View 5 metre 1 Ceiling Mount Position 0º Sensor Tilt Up 3º 3º 5 metre Sensor
More informationµdim Microwave Sensors User Manual
Microwave Sensors User Manual P e o p l e I n n o v a t i o n s S o l u t i o n s 1. Introduction µdim Table of Contents Page Introduction 2 Technical data 3 Dimensions and mounting options 9 Connections
More informationCeiling PIR HS presence detector. Product Guide. Overview. Features
Product Guide 796-2047 Ceiling PIR HS presence detector Overview The 796-2047 (passive infrared) presence detector provides automatic control of lighting loads with optional manual control. This is a high
More informationMaestro Occupancy Sensor C L Dimmer
Maestro Occupancy Sensor C L Dimmer Lutron Maestro occupancy sensor C L dimmers are lighting controls with passive infrared sensors that automatically control the lights in an area. These sensors detect
More informationLPC3BSP65 & LPC3BDP65
Product Guide LPC3BSP65 & LPC3BDP65 Batten mount PIR detectors Overview The LPC3B series of miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional
More information360º Surface Mount Ceiling PIR Light Controller
360º Surface Mount Ceiling PIR Light Controller Model: PDRS1500 Installation & Operating Instructions 1 1. General Information These instructions should be read carefully and retained for further reference
More information2000W PIR LIGHT CONTROLLER SLB2000-Black SLW2000-White INSTALLATION & OPERATING INSTRUCTIONS
2000W PIR LIGHT CONTROLLER SLB2000-Black SLW2000-White INSTALLATION & OPERATING INSTRUCTIONS SLB2000 PIR LIGHT CONTROLLER - BLACK WEATHERPROOF IP44 PIR SWITCHING 2000w MAXIMUM MANUAL ON/OFF OVERRIDE TIME
More informationMetalux SWLED LED. Type. Catalog # Project. Date. Comments. Prepared by
DESCRIPTION is a versatile LED surface or wall mount luminaire which can be used in a broad range of commercial and industrial applications. This series provides customers with a high quality luminaire
More informationCeiling PIR HS presence detector 1-10V, low temperature. PIR Sensor. IR Receiver. Light Level Sensor. Status LEDs. IR Receiver
Product Guide EBDHS-AD-LT30 Ceiling PIR HS presence detector 1-10V, low temperature Overview The EBDHS-AD-LT30 PIR (passive infrared) presence detector provides automatic control of lighting loads with
More informationD-Tect 2 GJD300 Quad PIR Movement Detector
D-Tect GJD0 Quad PIR Movement Detector Package Contents 3. Package Contains: x D-Tect x Drilling template for fixing holes x Allen Key 3 x 3.75mm wall plugs 3 x 3.75mm screws x Spare Sliding Curtains x
More informationGJD OPAL RFX WIRELESS 35 METRE EXTERNAL PIR INSTALLATION MANUAL
GJD OPAL RFX WIRELESS 35 METRE EXTERNAL PIR INSTALLATION MANUAL A WIRELESS PASSIVE INFRARED DETECTOR AND THREE CHANNEL RECEIVER THAT SIMULTANEOUSLY OR INDIVIDUALLY CONTROLS CCTV SWITCHERS, VIDEO RECORDERS
More informationEcoSystem H-Series 347 V~ Ballast Overview
Fluorescent Dimming s EcoSystemR H-Series 347 V ~ Architectural Dimming EcoSystem H-Series 347 V~ Overview 369-352e 1 06.04.12 EcoSystem H-Series digitally addressable ballasts provide a low-cost, flexible
More informationMini Product Guide.
Mini Product Guide www.acuitybrands.com/sensorswitch Better Performance Through Advanced Technology 100% Digital Passive Infrared (PIR) Detection Dual Technology Detection utilizing Microphonics Contractor
More informationLUX Hardwired - Installation Notes
Ness LUX wired PIR with Nightlight Quad element pyro sensor 15m x 15m wide angle coverage Look down Creep Zone Selectable Standard and Pet Aware modes Adjustable sensor mask for No Creep and Pet modes
More informationTechnology. Occupancy & Vacancy Sensors & Timers. Technology. Occupancy & Vacancy Sensors & Timers L-2
Passive Infrared Sensors (PIR) Using a patented fresnel lens which minimizes optical aberrations, each Legrand/Pass & Seymour PIR sensor breaks its coverage area into zones. Upon detecting an infrared
More informationUP 258E11 OPTISENS OFFICE
Product and functional description The UP 258E11 is a presence/motion detector with integrated 2-point light control. The UP 258E11 device communicates via KNX/EIB with actuators or other KNX devices.
More informationOccupancy Sensor LS Descriptions. Product Profile. Technical Specifications
LS-818-3 Descriptions Temco s Passive Infrared Occupancy Sensor is a low cost comercial and residential surface mount occupancy sensor. Advanced filtering reduces false triggering due to air movement and
More informationDescription FEATURES. l Innovative dual mount system requires only one sensor for either flush or surface mount applications
Simple Fit Switching Sensors 1.8m to 3m Cone-shaped detection pattern, 6m radius at mounting height 6.0m AC220~240V/50Hz MK Simple Fit Sensors offer cost effective presence detection for lighting control
More informationTouch Screen Thermostat. MTSC/SUPER/CO2, MTSC24/SUPER/CO2 Series. MTS/SUPER/CO2, MTS24/SUPER/CO2 Series. Owner s manual and technician settings
Touch Screen Thermostat MTSC/SUPER/CO2, MTSC24/SUPER/CO2 Series MTS/SUPER/CO2, MTS24/SUPER/CO2 Series Owner s manual and technician settings Rev. 2.4 Index 1. Owner s Manual... 3 1.1 Quick Guide. 4 1.2
More informationMaestro Occupancy Sensing Switch
Maestro Occupancy Sensing Switch Lutron Maestro Occupancy Sensing switches with occupancy and vacancy sensors are lighting controls with passive infrared sensors that automatically control the lights in
More informationModel #: RC3 Model #: RC3D Model #: RC3DE SAFETY INSTRUCTIONS
gate Installation Instructions l #: RC l #: RCD l #: RCDE l #: RC-PL l #: RCD-PL l #: RCDE-PL l #: RCD-PL-CP l #: RCDE-PL-CP l #: RC-PL-N l #: RCD-PL-N l #: RCDE-PL-N l #: RCD-PL-N-CP l #: RCDE-PL-N-CP
More informationIP65 High Bay Dual Sense Sensor
IP65 High Bay Dual Sense Sensor TM and, 1-10V Dimming with Remote Control Technical Data Input Characteristics Sensor Data Model No. Model No. Mains voltage 220-240VAC 50/60Hz Sensor principle High Frequency
More informationSpecifications Occupancy/Vacancy Sensors CSI ASHRAE AIA Division 16 Section 16950
1 Specifications Occupancy/Vacancy Sensors CSI 26.09.23. ASHRAE 90.1-2010 AIA Division 16 Section 16950 1. PART 1 - General 1.1 Overview 1.1.1 Provide Occupancy/Vacancy sensors as shown on the plans and
More informationEnglish. Italiano. Português. Françias. Español
DT AM Grade 3 Español Françias Português Italiano English High Ceiling Mount Detector Installation Guide English DT AM Grade 3 High Ceiling Mount Detector Installation Guide General Description The Industrial
More informationA. This Section includes the following lighting control devices:
Attachment G LIGHTING CONTROL SPECIFICATIONS (Download Document separately) LIGHTING CONTROL SPECIFICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including
More informationMaestro Dual-Circuit Occupancy Sensing Switch
Dual-Circuit Switch with Occupancy/Partial-On Maestro Dual-Circuit Occupancy Sensing Switch The Lutron Maestro Dual-Circuit Occupancy Sensing Switch combines two switches with an in-wall, passive infrared
More informationIntegrated PIR detectors
EBMINT - Product Guide Integrated PIR detectors Overview The EBMINT series of miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional manual control
More information60W Multi PIR Bulkhead
60W Multi PIR Bulkhead Model: MLB98 Black Installation & Operating Instructions 1. General information: The unit utilises passive infrared technology to detect heat radiation of moving human bodies. Upon
More informationRooftop Unit, Heat Pump and Indoor Air Quality Application Guide VT8600 Series Room Controllers
Rooftop Unit, Heat Pump and Indoor Air Quality Application Guide VT8600 Series Room Controllers TABLE OF CONTENTS Overview 2 VT86X0U5X00B 2 heating / 2 Cooling for Rooftop unit and Indoor air quality 3
More informationFor assistance with the product please contact: HELPLINE. For a product brochure please contact:
For assistance with the product please contact: HELPLINE 020 8450 0515 or email helpline@timeguard.com For a product brochure please contact: Timeguard Limited. Victory Park, 400 Edgware Road, London NW2
More informationHi-lume 3D Overview. Fluorescent Dimming Ballasts Hi-lume 3D Architectural Dimming
Fluorescent Dimming s Hi-lume 3D Architectural Dimming Hi-lume 3D Overview 369-280f 1 03.08.12 Hi-lume 3D architectural electronic dimming ballasts are designed to meet the most demanding lighting requirements.
More informationDETECTOR TRANSMITTER INSTALLATION & OPERATING. Cat No. TLTX2000B INSTRUCTIONS
DETECTOR TRANSMITTER Cat No. TLTX2000B INSTALLATION & OPERATING INSTRUCTIONS 1 Introduction The TLTX2000B Controller Transmitter is part of the Timeguard range of PIR products which communicate by radio
More informationPSC-BL-I-FM-DC0(-BLE) Bi-level Dimming PIR Sensor
TECHNICAL SPECIFICATIONS PSC-BL-I-FM-DC0(-BLE) Bi-level Dimming PIR Sensor Overview Quad Element PIR sensor 0-10V configurable output: set to 0% (OFF)*, 10%, 25% or 50% dimming Photocell for ambient light
More informationTouch Screen Thermostat. MTSC/SUPER, MTSC24/SUPER Series. MTS/SUPER, MTS24/SUPER Series. Owner s manual and technician settings
Touch Screen Thermostat MTSC/SUPER, MTSC24/SUPER Series MTS/SUPER, MTS24/SUPER Series Owner s manual and technician settings -2 - Index 1. Owner s Manual... 4 1.1 Quick Guide. 4 1.2 Turning the unit ON
More informationPMCSF6 OCCUPANCY SENSOR
PMCSF6 OCCUPANCY SENSOR Lens Main Body Power Cord INTRODUCTION The use of occupancy detectors in commercial and industrial applications can significantly reduce energy usage lessening both energy costs
More informationWireless High Bay Sensor (WHS100) Installation Instructions
Installation Instructions The Daintree Networks WHS100 Wireless High Bay Sensor is a line powered control component within the ControlScope wireless building controls platform. It enables wireless control
More informationViewguard Motion detctors PIR and DUAL detectors
Motion detctors and DUAL detectors Passive infrared sensor Passive infrared and microwave sensor AM DUAL AM DUAL Variations detectors: - AM /BUS-1 VdS Class C EN 5131-1 and EN 5131-2-2, grade 3 - /BUS-1
More informationCommercial Series TriTech Motion Detector. Reference Guide
Commercial Series riech Motion Detector en Reference Guide Commercial Series riech Motion Detector able of contents en 3 able of contents 1 Safety 4 Introduction 5.1 About documentation 5. Bosch Security
More informationArrow Hart. Universal Dimmers and Sensors. Eaton s Arrow Hart. Reliable lighting control for commercial installations
Eaton s Arrow Hart Commercial lighting controls Eaton s Arrow Hart Universal Dimmers and Sensors Reliable lighting control for commercial installations Arrow Hart Eaton s sensors and dimmers are cost -effective
More informationIP65 High Bay Dual Sense Sensor
IP65 High Bay Dual Sense Sensor TM and, Daylight Harvest with Remote Control Technical Data Input Characteristics Sensor Data Model No. Model No. Mains voltage 220-240VAC 50/60Hz Sensor principle High
More informationWelcome. Sensor. 1 (844) LIGHTCLOUD Custom manufactured in China RAB Lighting, Inc 170 Ludlow Avenue Northvale, NJ 07647
Lightcloud is a commercial wireless lighting control system & service. It s powerful and flexible, yet easy to use and install. Learn more at lightcloud.com 1 (844) LIGHTCLOUD 1 (844) 544-4825 support@lightcloud.com
More informationD-TECT Dual Tech. GJD360 Triple Technology External Detector
D-TECT Dual Tech GJD360 Triple Technology External Detector PACKAGE CONTENTS 1 x Dual Tech 1 x Drilling template for fixing holes 3 x 31.75mm wall plugs 3 x 31.75mm screws 2 x Spare Sliding Curtains 2
More informationCS1200 WHT Pir Ceiling Mount Occupancy Sensor
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Area Coverage Field of View Load Type
More informationMALAVIYA NATIONAL INSTITUTE OF TECHNOLOGY JAIPUR. No. F5(1587)ST/MNIT/Estate/2016 Phone : ,
MALAVIYA NATIONAL INSTITUTE OF TECHNOLOGY JAIPUR No. F5(1587)ST/MNIT/Estate/2016 Phone : 0141-2713312,2713352 M/s......... Fax No. : 0141-2529078 NOTICE INVITING QUOTATIONS 1. Registrar, MNIT, Jaipur invites
More informationA. This Section includes the following lighting control devices:
SECTION 26 09 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More information360º FLUSH MOUNT CEILING PIR LIGHT CONTROLLER INSTALLATION & OPERATING. Cat No. SLFM360 INSTRUCTIONS
360º FLUSH MOUNT CEILING PIR LIGHT CONTROLLER Cat No. SLFM360 INSTALLATION & OPERATING INSTRUCTIONS 1 Introduction The SLFM360 utilises passive infrared technology to detect heat radiation of moving human
More informationWireless Occupancy Sensor, Wall Mount with Photosensor (WOS2-WM)
Installation Instructions The Daintree wall mounted Wireless Occupancy Sensor (WOS2-WM) operates seamlessly within the Daintree wireless lighting control platform. The WOS2-WM is a battery-powered occupancy
More informationGI1DPC/B User Guide. Mains tungsten GLS filament or halogen lamp Min 60W Max 300W. Linear fluorescent
GI1DPC/B User Guide Single gang PIR Dimmer Replaces a standard light switch or dimmer Turns off automatically Turns on automatically Security mode Night light mode* Scene setting and soft on/off* * only
More informationHigh bay PIR presence detector 1-10V dimming. PIR Sensor. IR Receiver. Light Level Sensor. Status LEDs. IR Receiver
Product Guide EBDSPIR-HB-AD High bay PIR presence detector 1-10V dimming Overview The EBDSPIR-HB-AD PIR (passive infrared) presence detector provides automatic control of lighting loads with optional manual
More informationReduce lighting energy costs with controls
Reduce lighting energy costs with controls Reduce energy costs. Support sustainability Get control of your lighting. Upgrading lighting systems to next-generation lighting technologies can deliver energy
More information360 Surface Mount Ceiling PIR Light Controller
360 Surface Mount Ceiling PIR Light Controller Model: SLW360L Installation & Operating Instructions 1 1. General Information These instructions should be read carefully and retained for further reference
More informationLS-CM Series. Overview. Applications. Features & Benefits. Datasheet. Ceiling mount occupancy sensors
Datasheet Ceiling mount occupancy sensors Overview The CM Series of ceiling mount occupancy sensors provide a range sensor solutions for applications with finished ceilings (e.g., ceiling tiles, sheetrock,
More information