aleddra CF-LED U-Lamp HID/MH Replacement SureFit LED Downlight Slim Vapor Tight Linear Highbay Fixture LED DMD Flood Light Slim Shoebox Fixture

Transcription

1 Product Catalog 2 CF-LED U-Lamp HID/MH Replacement AC friendly (ballast must be bypassed) Compact design and half the weight of LEC Corn Light Up to 80% energy savings! Cost-effective HID/MH replacement Mounting style: Base-up (BU), Horizontal or Base-Down (BD) 22W to 50W may be used with enclosed fixture with sufficient housing space 80W not recommended for enclosed fixture SureFit LED Downlight Stylish lens-less design Patent-pending nano-reflector for indirect lighting Uniform light distribution Free of hot-spot Rated for commercial installation Installation with or without a recess can EasiFit Troffer Kit UFO Highbay Fixture Easy installation, no screw needed Size: 2x2 and 2x4 0-10V Dimmable Certified for utility rebate DLC Premium listed 7-year warranty (10-year optional) IP65 rated 100W to 500W Dimmable DLC 4.2 Sensors optional Reflector optional Linear Highbay Fixture Saves up to 70% energy as compared to existing highbay fixtures Meanwell driver Samsung LED Motion sensor: optional DLC 4.0 qualified for utility rebate application Slim Vapor Tight Sizes:,, IP65 rated Motion Sensor (optional) Emergency Backup (optional) 180 minutes on battery Battery check by remote control 5-year warranty LED DMD Flood Light Slim Shoebox Fixture Compact and light weight Wide range of wattage Higher wattage models can be used for sports field lighting Samsung LED doides 5-year warranty Energy-efficient and cost-effective replacement for existing parking lot lighting luminaire Slim exterior design yields less wind drag, protective cover on the back prevents bird from nesting Light Distribution: Type III & Type V Options: Wireless dimming controller, Photocell, 480V driver, square/round mounting brackets IP65 wet location Slim Lowbay Canopy Quick Mounting Wall Pack Energy-efficient & cost-effective replacement for existing traditional lowbay canopy luminaire Built with top of the line LEDs and the reputable Meanwell driver Canopy light uses aluminum die-casting heat sink and exterior Sleek and asthetic appearance IP65 wet location Ideal for gas station canopy lighting applications More than 85% light transmission glass lens Application: outdoor walkways, security lighting, building entrances, schools, museum and commercial building Back fins on base cover, providing efficient heat dissipation Photocell installed by default 0-10V dimmable for great energy savings Light guard for dark-sky compliance (optional) Vandal protection guard (optional) Photo control and motion sensor (optional)

2 s a les@.com a leddra.com Product Catalog 1 G5 SureFit DBA LED Tube Emergency T8 Tube Safest LED T8 on the market Double-end wired with safety switches Ballast compatible AC Line Voltage friendly Patented safety design for anti-shock protection Available in and, all colors Universal driver (110V-277V) Works with shunted and non-shunted sockets DLC 4.2 qualified 2-in-1 tube: regular T8 lighting and emergency lighting Built-in lithium batteries Test button and battery check indicator Easy to install and cost-effective 5-year warranty LED T8 Tube G5 SureFit U-bend LED Tube Ballast bypass (Type B) Double-end wired on line voltage Universal driver 110V-277V and frosted lens All popular 8 f-t bases available (FA8, R17D, G13) UL OOLV certified for plug and play, and UL IFAR certified for direct wire Fits all standard 2'x2' U-bend troffers and sockets Works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V Double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets) Field-replaceable internal driver Linear Strip Conversion Kit/G13 Socket EasiFit T5 Ballast-Compatible LED Tube Low maintenance cost Suitable for all G13 T8 bi-pin LED tube (double-end LED tube is strongly recommended for safety reasons) Pre-wired conversion kit bracket for easy installation Pre-drilled holes for 8-4I to 2-2I conversion and ballast cover installation Universal driver (110V-277V) UL Rated Made in Italy Non-shunted sockets Only available at Aleddra! Direct-fit, plug & play with T5HO ballast Full nano plastic housing body, giving it the exact look and feel of fluorescent T5 and a very wide lighting angle Fits nicely into the existing T5 fixture without any rewiring Lighting is brighter PLL LED Lamp LED Cooler Tube Ballast bypass (Type B) Target Replacement Lamps: FT/2G11 : 125 lm/w Energy efficient Cost-effective IP65 rating for moisture proof LED alternative for refrigerator lighting National grocers, supermarkets, and conveni - ence stores are the perfect target audience for the CoolerTube Omni A19 Screw-in LED Bulb CF-LED Lamp PL Replacement 8W (60W Equivalent) Light Output: 800 lm Dimmable E26 (Medium Base) 360 beam angle Rated for enclosed fixtures No shadow or dark zone near base Energy efficient Cost-effective 50% energy saving and 75% maintenance reduction Cost-effective Rated for enclosed fixture GX23-2 & G24Q bases are dual-mode: ballast-compatible and line voltage friendly E26 & GU24 bases are line voltage friendly Can be installed horizontally or vertically with the same beam spread as traditional lamps

3 G5 SureFit DBA LED Tube Ballast & AC Compatible & Size Lens Type Driver Style Ballast, CRI > 80 Input Voltage, Field-replaceable internal driver Instant Start lens 140 lm/w Lens 120 lm/w 2700K,,,, 6000K 110V-277V (50-60Hz) Operating Temp. -20ºF to 122ºF Power Consumption Light Output Beam Angle 180º @ 1800lm 5-year warranty/50,000 hours info@.com sales@.com Safest LED T8 on the market Double-end wired with safety switches Ballast compatible AC Line Voltage friendly Patented safety design for anti-shock protection Patented replaceable driver to extend LED tube life to 10 years Available in and, all colors Universal driver (110V-277V) The SureFit tube comes with a field replaceable driver Works with shunted and non-shunted sockets UL and cul Type A/Type B listed (OOLV/OOLV7.E479597) UL and cul classified (IFAR/IFAR7.E325073) DLC 4.2 qualified Maintenance personnel can now easily insert a G5 SureFit tube in a fixture just like they would do for an ordinary T8 fluorescent. When the ballast fails, electricians may bypass the ballast for further energy savings. When wired double ended on line voltage, patented saftey switches on both ends make the G5 tube the safest LED T8 on the market. DOUBLE-END WIRED W/ SAFETY SWITCHES Patented safety switches protect an installer from electric shock hazard, unlike some products on the market, the G5 works with existing T8/T12 sockets, shunted or non-shunted. Furthermore, adds an additional fail safe in case of accidental future fluorescent reinsertion by custodial staff. AC-LINE VOLTAGE FRIENDLY It works with direct input voltage from 110V to 277V THE SUREFIT TUBE It has a field replaceable driver. You may opt to purchase the field replaceable driver at time of product purchase, effectively extending the product's warranty from 5 years to 10 years. Standard warranty is 5 years/50,000 hours DARE-YOU-TO-TOUCH-IT TEST If the other manufacturer inserts one end of their tube into a live fixture and will not touch the pins of the exposed end, then it is not a safe product. Model # Size Lens Model # Size Lens LLT-2-T8-10W-DBA-D-27K LLT-2-T8-10W-DBA-D-30K LLT-2-T8-10W-DBA-D-35K LLT-2-T8-10W-DBA-D-40K LLT-2-T8-10W-DBA-D-50K LLT-2-T8-10W-DBA-D-60K LLT-2-T8-10W-DBA-C-27K LLT-2-T8-10W-DBA-C-30K LLT-2-T8-10W-DBA-C-35K LLT-2-T8-10W-DBA-C-40K LLT-2-T8-10W-DBA-C-50K LLT-2-T8-10W-DBA-C-60K 10W 10W 10W 10W 10W 10W 10W 10W 10W 10W 10W 10W 1100lm 1100lm 1100lm 1200lm 1200lm 1200lm 1300lm 1300lm 1300lm 1400lm 1400lm 1400lm 2700K 6000K 2700K 6000K LLT-4-T8--DBA-D-27K LLT-4-T8--DBA-D-30K LLT-4-T8--DBA-D-35K LLT-4-T8--DBA-D-40K LLT-4-T8--DBA-D-50K LLT-4-T8--DBA-D-60K LLT-4-T8--DBA-C-27K LLT-4-T8--DBA-C-30K LLT-4-T8--DBA-C-35K LLT-4-T8--DBA-C-40K LLT-4-T8--DBA-C-50K LLT-4-T8--DBA-C-60K 1650lm 1650lm 1650lm 1800lm 1800lm 1800lm 1950lm 1950lm 1950lm 2100lm 2100lm 2100lm 2700K 6000K 2700K 6000K

4 Emergency T8 Tube 2-in-1 tube: regular T8 lighting and emergency lighting Built-in lithium batteries Test button and battery check indicator Easy to install and cost-effective 5-year warranty ETL, 18W CRI >80 Input Voltage Light Output LED Type AC V 1890lm SMD2835 Power Factor >0.92 Luminous Efficiency Emergency Time Lighting Output When on Battery >105lm/W 90 minutes 3W, 427.9lm 5-year Wiring Diagram The Emergency T8 Tube comes with an integrated emergency battery. It can be used as a regular T8 lamp and an emergency tube. It has a test button and indicator lamps so that it is safe with fire protection standard. It has over-charging and over-discharging protection which ensure the life time of batteries (800 times charging and discharging). This Emergency T8 Tube is a cost-effective option for various emergency lighting applications such as office buildings, schools, hotels, apartments, corridors, and stairs. It is required to operate on a separate circuit. To turn on or off the Emergency T8, turn off the power first and within 3 seconds turn on the power. Product Model YSH-T812-Y01-18(G13) YSH-T812-Y01-18(G13) info@.com sales@.com

5 T8 LED Linear Tube G3 Dimmable Double-end Ideal energy saving replacement for traditional T12 and T8 fluorescent lamps TRIAC base (forward phase) dimmer support. entrances, schools, museums and commercial buildings Double-ended tubes may be installed in either shunted or non-shunted lamp holders Patented safety design for anti-shock protection Driver style: field-replaceable internal driver Length 100 LPW (diffused lens) 30K, 41K, 50K, 60K CRI > 80 Input Voltage 110V-277V (50-60Hz) Operating Temp. -20ºF-122ºF Power at 18W Output at 1800lm Beam Angle 120º Dimmable via TRIAC based dimmer UL 1598C Classified: #E Aleddra s third-generation double-ended EasiRetrofit LED tube lamp is now dimmable via TRIAC based dimmer. It has been UL-classified according to the latest 1598C safety standards. It is an ideal energy saving replacement for traditional T12 and T8 fluorescent lamps. The double-ended tubes can be installed in either shunted or non-shunted lamp holders, saving 50-70% installation time and associated labor costs compared to retrofits using standard single-ended LED tubes. The third-generation EasiRetrofit LED tube features a patented field-replaceable driver. It can be installed into the existing tube in less than 2 minutes. It minimizes the repair and replacement downtime in the field and also doubles the lifetime of the LED tube to 10 years at a fraction of the cost of a new tube replacement. Rated Life up to 50,000 hours 5-year warranty (12 hours/day usage) Wiring Diagram Black square indicates ballast. Always ensure that the working voltage is 100v to 277v. This product is directly connected to the power supply. No ballast or starter is needed. IMPORTANT: Before replacing the existing fluorescent tube, the ballast and starter must be bypassed and the circuit reconnected. LLT-4-T8-D-SW-120-DM2-D-10-30K* LLT-4-T8-D-SW-120-DM2-D-10-41K LLT-4-T8-D-SW-120-DM2-D-10-50K LLT-4-T8-D-SW-120-DM2-D-10-60K* LLT-4-T8-C-SW-120-DM2-D-10-30K* LLT-4-T8-C-SW-120-DM2-D-10-41K LLT-4-T8-C-SW-120-DM2-D-10-50K LLT-4-T8-C-SW-120-DM2-D-10-60K* LLT-4-T8-D-SW-120-DM1-D-10-30K* LLT-4-T8-D-SW-120-DM1-D-10-41K LLT-4-T8-D-SW-120-DM1-D-10-50K LLT-4-T8-D-SW-120-DM1-D-10-60K* LLT-4-T8-C-SW-120-DM1-D-10-30K* LLT-4-T8-C-SW-120-DM1-D-10-41K LLT-4-T8-C-SW-120-DM1-D-10-50K LLT-4-T8-C-SW-120-DM1-D-10-60K* Lens Input Voltage 277V 277V 277V 277V 277V 277V 277V 277V 110V 110V 110V 110V 110V 110V 110V 110V info@.com sales@.com

6 LED T8 Tube Ballast bypass (Type B) FA8 R17D G13 Double-end wired on line voltage Plastic lens & aluminum heatsink (shatter-free) Universal driver 110V-277V and frosted lens All popular 8 f-t bases available (FA8, R17D, G13) : 130 lm/w CRI: 85 ETL Base FA8, R17D, G13 30K, 35K, 40K, 50K, 60K CRI 85 Input Voltage 110V-277V Operating Temp. -20ºF-122ºF Power Factor >0.95 Output 5200lm Rated Life up to 50,000 hours The LED T8 Tube from Aleddra saves the end user the difficulty of converting to fixtures. It can use the existing fixture and socket directly on line-voltage without replacing the sockets. The LED Tube can save up to 60% energy consumption and minimize the installation costs. It is an ideal option for the T8/T12 retrofit. 5-year warranty Length Base Wiring without Ballast Diagram AL-T8-40P8FT-FA8-30K AL-T8-40P8FT-FA8-35K AL-T8-40P8FT-FA8-40K AL-T8-40P8FT-FA8-50K AL-T8-40P8FT-FA8-60K AL-T8-40P8FT-R17D-30K AL-T8-40P8FT-R17D-35K AL-T8-40P8FT-R17D-40K AL-T8-40P8FT-R17D-50K AL-T8-40P8FT-R17D-60K AL-T8-40P8FT-R17D (G13) 30K AL-T8-40P8FT-R17D (G13) 35K AL-T8-40P8FT-R17D (G13) 40K AL-T8-40P8FT-R17D (G13) 50K AL-T8-40P8FT-R17D (G13) 60K FA8 FA8 FA8 FA8 FA8 R17D R17D R17D R17D R17D G13 G13 G13 G13 G K 6000K 6000K info@.com sales@.com

7 G5 SureFit U-bend LED Tube 2 UL OOLV certified for plug and play, and UL IFAR certified for direct wire Fits all standard 2'x2' U-bend troffers and sockets Works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V Double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets) Field-replaceable internal driver Lens Type clear, diffused DLC 4.2 qualified UL Type A/Type B listed (OOLV #E479597) UL Type B classified (IFAR #E325073) clear lens 120 LPW diffused lens 100 LPW CRI > 80 Input Voltage Operating Temp. Power Light Output 27K, 30K, 35K, 40K, 50K 110V-277V (50-60Hz) -20ºF-122ºF Beam Angle 160º Ballast Rated Life 1800lm 1500lm Instant Start, Rapid Start up to 50,000 hours 5-year warranty Aleddra s SureFit T8 U-bend tube is a smart choice for retrofitting existing fluorescent U-bend T8 s with an energy efficient replacement without taking the costly alternative of complete fixture upgrades. Aleddra s U-bend T8 tube has a 6 separation between the two legs and will fit all standard 2 x2 U-bend troffers and sockets. The U-bend tube is double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets). It works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V. Using a Ballast The SureFit U-bend tube can directly replace the existing fluorescent U-bend without rewiring. Using Line Voltage The installation process is simple and straightforward. Bypass the ballast Connect line voltage directly to the stockets (hot on one end and neutral on the other) Insert the U-bend tube LLT-2U-T8--BA-C-27K LLT-2U-T8--BA-C-30K LLT-2U-T8--BA-C-35K LLT-2U-T8--BA-C-40K LLT-2U-T8--BA-C-50K LLT-2U-T8--BA-D-27K LLT-2U-T8--BA-D-30K LLT-2U-T8--BA-D-35K LLT-2U-T8--BA-D-40K LLT-2U-T8--BA-D-50K Lens Temp. 2700K 2700K Photos info@.com sales@.com

8 T8/T12 Conversion Kit Linear Strip Fixture Conversion Low maintenance cost Suitable for all G13 T8 bi-pin LED tube (double-end LED tube is strongly recommended for safety reasons) Pre-wired conversion kit bracket for easy installation Nice white-paint glossy finish for professional look Pre-drilled holes for 8-4I to 2-2I conversion and ballast cover installation Details Each kit includes: G13 T8 bi-pin sockets (tombstones) Available Kits (8-4I) Conversion Kit lamps to four lamps (2-2I) Conversion Kit lamp to four lamps UL Certified Aleddra s T8/T12 conversion kit is designed for an linear fluorescent tube retrofit. Aleddra is well known for its EasiRetroFit double-end LED tube among lighting professionals. The LED tube and the conversion kit will give you energy efficiency and low costs for all your lighting retrofit projects. 8-4I conversion kit can be reconfigured in the field to 2-2I kit, saving the end user the trouble of having exact counts on both fixtures. Kit-T8-8-4I Kit-T8-8-2I Two to four lamp conversion kit One to two lamp conversion kit info@.com sales@.com

9 EasiFit T5 Ballast-Compatible Plastic LED Tube Direct-fit, plug & play with T5HO ballast Full nano plastic housing body, giving it the exact look and feel of fluorescent T5 and a very wide lighting angle Fits nicely into the existing T5 fixture without any rewiring Lighting is brighter Socket Type G5 (standard T5 lamp socket) UL Type A certified DLC 4.2 qualified LPW 30K, 35K, 40K, 50K CRI > 80 Input Voltage 110V-277V (50-60Hz) Operating Temp. -4ºF-113ºF Power 28W Light Output 2900lm to 3200lm Beam Angle 185º 5-years/50,000 hours Aleddra s EasiFit T5 LED tube lamp is a UL Type A internal driver tube that is compatible with F54 T5HO ballasts. With a price almost comparable to a T5 tube, our EasiFit tube lasts longer and has great energy savings. The end user can achieve savings on the retrofit investment. LLT-4-T K LLT-4-T K LLT-4-T K LLT-4-T K The EasiFit T5 LED tube features a full nano plastic body housing, giving it the exact look and feel of the fluorescent T5 and has a very wide lighting angle. The light is brighter and it fits nicely into the existing T5 fixture without any rewiring info@.com sales@.com

10 PLL LED Lamp - Ballast Bypass Ballast bypass (Type B) Target Replacement Lamps: FT/2G11 : 125 lm/w Energy efficient Cost-effective 5-year warranty Base 2G11 30K, 35K, 40K, 50K 17W 125lm/w Length 22 Input Voltage 110V-277V Operating Temp. -4ºF-120ºF UL certified Aleddra s PLL LED lamp is designed for replacing PLL lamp (2G11 base) that is used pre-dominantly with 2x2 troffer fixtures. This retrofit lamp avoids the costly fixture upgrade, saves 57.5% on lighting energy consumption from the start, and removes ballast maintenance costs once and for all for the end user. The PLL lamp is UL certified and comes with 5-year warranty. Power Factor 0.9 Dimmable Light Output Non-dimmable 30K/35K: 2100lm 40K/50K: 2200lm Length Base Rated Life up to 50,000 hours 5-year warranty APLL-23W-2800-BP-30K APLL-23W-2800-BP-35K APLL-23W-2800-BP-40K APLL-23W-2800-BP-50K G11 2G11 2G11 2G W 17W 17W 17W info@.com sales@.com

11 LED Cooler Tube External Driver 5-ft 6-ft Qualifies for Utility Rebates IP65 rating for moisture proof LED alternative for refrigerator lighting External driver included National groceries, supermarkets, and convenience stores are the perfect target audience for the Cooler Tube Lens Type Driver Type Input Voltage Output Voltage clear external driver 100V-277VAC (50-60Hz) 36V DC > 95 LPW (clear lens) culus DLC 30K, 35K, 40K, 45K, 50K CRI > 80 Operating Temp. -20ºF-122ºF Power Factor >.90 Beam Angle 170º 5-year Aleddra, with its strong industry reputation with the EasiRetrofit LED tube for T12/T8 replacements, is now offering an LED alternative for refrigerator lighting. The Cooler Tube is designed with a 170 degree beam angle, meeting the needs of merchandise lighting on both sides of the LED light, while maintaining a high efficacy at 95 lm/w and a power factor Length Lens LLT-4-FR-C-22W-35K LLT-4-FR-C-22W-40K LLT-4-FR-C-22W-50K LLT-5-FR-C-22W-35K LLT-5-FR-C-22W-40K LLT-5-FR-C-22W-50K LLT-6-FR-C-30W-35K LLT-6-FR-C-30W-40K LLT-6-FR-C-30W-50K 5-ft 5-ft 6-ft 6-ft 6-ft National groceries, supermarkets, and convenience stores are the perfect target customers for the Cooler Tube. It is used in coolers and refrigerators info@.com sales@.com

12 LED E26 Screw-In Bulb E26 Base 8W (60W Equivalent) Light Output: 800 lm Dimmable E26 (Medium Base) 360 beam angle Rated for enclosed fixtures No shadow or dark zone near base 2-year warranty UL Bulb Type Base LED A19 E K,,,, CRI >80 Beam Angle 360º Input Voltage AC120V 8W 800lm Operating Temp. -20ºF to 120ºF The first full-glass dimmable LED A19 bulb in the US market. The Omni A19 LED screw-in bulb looks exactly like an incandescent bulb, without the risk of theft! The Omni A19 radiates a 360 beam, leaving no shadow or dark zone near the base of the bulb. The Omni A19 8W LED screw-in bulb is the most cost-effective replacement to a 60W incandescent bulb. No coupons or rebates needed! Start your savings NOW! Rated Life 15,000 hours 2 year warranty Dimensions A in diameter, 4.25 in height Product Model Replacing AAL-7.7WA19-E26-30K 8W 60W AAL-7.7WA19-E26-40K 8W 60W *Other colors are available made-to-order The traditional A19 LED lamp has a hard cutoff of light at the dark base zone. The Aleddra A19 bulb doesn t have a dark zone at the base and puts out light beyond the base info@.com sales@.com

13 CF-LED Lamp E26, GX23-2, G24Q, GU24, G24D-3 bases Socket Type 120 LPW E26, GU24, G24D-3 (diagonal 2-pin), GX23-2 (2-pin), G24Q (4-pin) 2700K,,,, CRI > 80 Input Voltage 110V-277V Operating Temp. -20ºF to 122ºF, Beam Angle 360º 50% energy saving and 75% maintenance reduction Cost-effective Rated for enclosed fixture GX23-2 & G24Q bases are dual-mode: ballast-compatible and line voltage friendly E26 & GU24 bases are line voltage friendly Can be installed horizontally or vertically with the same beam spread as traditional lamps 5-year warranty UL and cul Type A/Type B listed (OOLV/OOLV7.E479597) UL and cul classified (IFAR/IFAR7.E325073) Aleddra s CF-LED lamp offers the first 360-degree LED PL lamp with 100 lm/w efficacy. Unlike other LED PL lamps on the market today, this revolutionary lamp can be installed either vertically or horizontally with the same beam spread as traditional lamps. Size: : 1 3/8 W x 1 3/8 L x 4.5 H (top to socket edge, not including the in-socket length) : 1 3/8 W x 1 3/8 L x 6.1 H (top to socket edge, not including the in-socket length) (G24D-3/GX23-2/G24Q) (E26/GU24) Model # Socket Replace CFL Model # Socket Replace CFL APL-6-D-GX K (G24D-3) APL-6-D-GX K (G24D-3) APL-6-D-GX K (G24D-3) APL-6-D-GX K (G24D-3) APL-6-D-GX K (G24D-3) APL-6-D-GX K APL-6-D-GX K APL-6-D-GX K APL-6-D-GX K APL-6-D-GX K APL-11-D-GX K APL-11-D-GX K APL-11-D-GX K APL-11-D-GX K APL-11-D-GX K APL-6-D-G24Q-27K APL-6-D-G24Q-30K APL-6-D-G24Q-35K APL-6-D-G24Q-40K APL-6-D-G24Q-50K APL-11-D-G24Q-27K APL-11-D-G24Q-30K APL-11-D-G24Q-35K APL-11-D-G24Q-40K APL-11-D-G24Q-50K G24D-3 G24D-3 G24D-3 G24D-3 G24D-3 GX23-2 GX23-2 GX23-2 GX23-2 GX23-2 GX23-2 GX23-2 GX23-2 GX23-2 GX23-2 G24Q G24Q G24Q G24Q G24Q G24Q G24Q G24Q G24Q G24Q 750lm 750lm 750lm 750lm 750lm K 2700K 2700K 2700K 2700K APL-6-A-E26-27K APL-6-A-E26-30K APL-6-A-E26-35K APL-6-A-E26-40K APL-6-A-E26-50K APL-11-A-E26-27K APL-11-A-E26-30K APL-11-A-E26-35K APL-11-A-E26-40K APL-11-A-E26-50K APL-6-A-GU24-27K APL-6-A-GU24-30K APL-6-A-GU24-35K APL-6-A-GU24-40K APL-6-A-GU24-50K APL-11-A-GU24-27K APL-11-A-GU24-30K APL-11-A-GU24-35K APL-11-A-GU24-40K APL-11-A-GU24-50K E26 E26 E26 E26 E26 E26 E26 E26 E26 E26 GU24 GU24 GU24 GU24 GU24 GU24 GU24 GU24 GU24 GU K 2700K 2700K 2700K info@.com sales@.com

14 CF-LED U-Lamp E26, E39 HID/MH Replacement >95 LPW Socket Type E26, E39, G24Q (22W only) AC friendly (ballast must be bypassed) Compact design and half the weight of LEC Corn Light Up to 80% energy savings! Cost-effective HID/MH replacement Mounting style: Base-up (BU), Horizontal or Base-Down (BD) 22W to 50W may be used with enclosed fixture with sufficient housing space 80W not recommended for enclosed fixture 5-year warranty culus Listed DLC 4.0 (E39 base) LDL (E26 base) Patent Pending CRI,, > 80 (>90 optional) Input Voltage 110V-277V (bypassing ballast) Operating Temp. -20ºF to 122ºF Beam Angle 360º 22W, 30W, 50W, 80W 5-year warranty/50,000 hours Aleddra s CF-LED U-lamp is the most cost-effective retrofit option for HID lamp with up to 80% energy savings. Compared to LED Corn Light, it is superior in two aspects: half of the weight and smaller in size, which makes it a preferred option for enclosed HID fixtures. This CF-LED U-lamp operates with 110 to 277V AC line voltage without any ballast. Available in E26 and E39 (mogul base) base. L70 > 50,000 hours info@.com sales@.com Diameter Length 22W W W W Model # Replace HID Model # Replace HID ALJ12-22U-830-G24Q ALJ12-22U-840-G24Q ALJ12-22U-850-G24Q ALJ12-22U-830-E26 ALJ12-22U-840-E26 ALJ12-22U-850-E26 ALJ16-30U-830-E26 ALJ16-30U-840-E26 ALJ16-30U-850-E26 22W 22W 22W 22W 22W 22W 30W 30W 30W 2100lm 2100lm 2100lm 2100lm 2100lm 2100lm 3400lm 3400lm 3400lm 65W 65W 65W 65W 65W 65W 100W 100W 100W ALJ16-50U-830-E26 ALJ16-50U-840-E26 ALJ16-50U-850-E26 ALJ16-50U-830-E39 ALJ16-50U-840-E39 ALJ16-50U-850-E39 ALJ16-80U-830-E39 ALJ16-80U-840-E39 ALJ16-80U-850-E39 50W 50W 50W 50W 50W 50W 80W 80W 80W 5000lm 5000lm 5000lm 5000lm 5000lm 5000lm 7500lm 7500lm 7500lm 175W 175W 175W 175W 175W 175W 250W 250W 250W

15 SureFit LED Downlight Stylish lens-less design Patent-pending nano-reflector for indirect lighting Uniform light distribution Free of hot-spot Rated for commercial installation Installation with or without a recess can 3-year warranty / 30,000 hours Size 5 / 7.5 Input Voltage V 9W, 12W 30K and 40K (other color made to order) Light Output lm CRI > 80 Beam Angle 120º Operating Temp. -4 ºF to 122 ºF 3-year / 30,000 hours Product Model # Light Output Dimensions AL-SELD31US K 9W 700 lm 5 x 2.5 AL-SELD31US K 9W 730 lm 5 x 2.5 AL-SELD31US K 12W 910 lm 7.5 x 2.9 AL-SELD31US K 12W 950 lm 7.5 x 2.9 UL EnergyStar pending Aleddra s SureFit LED Downlight is a high performance and cost-effective option for commercial and residential ceiling lighting applications. This downlight comes with an E26 straight wire connection and mounting hardware, installation is quick and easy and does not require the help of a professional. With its superior efficacy and a longer life than compact fluorescents, it provides soft white light to create a comfortable and relaxing environment. The downlight comes with two sets of springs. Spring A set is for installation with existing recess can, whereas Spring B set is for installation without recess can, i.e., directly to the ceiling. Spring A Spring B info@.com sales@.com

16 Disc Light Round LED Light Engine Easy integration to new fixture construction Application: Ceiling Light, Flush Mount Fixtures Integral driver-on-board Line-voltage dimmable Title 24 compliant 5 year warranty UL Certified, CRI 80 Input Voltage 110V AC Operating Temp. -20ºF to 120ºF 17W, 28W 1200lm The Disc Light is a cost-effective, high-performance retrofit option for ceiling lights, drum fixtures, and flush mounted fixtures, without the need of replacing the complete fixture. Its line-voltage dimmable, making ideal replacement for dimmable incandescent light or CFL light (bypass ballast). Dimming Rated Life 2200lm Yes 50,000 hours 5 year warranty Dimensions Model # Dimension AL-4RLE-90-30K AL-4RLE-90-40K AL-7RLE-90-30K AL-7RLE-90-40K W 17W 28W 28W 1200lm 1200lm 2200lm 2200lm info@.com sales@.com

17 EasiFit Troffer Kit 2x4, 2x2 Easy installation, no screw needed 0-10V Dimmable Certified for utility rebate CRI > 80 Input Voltage Operating Temp. 126 LM/W 30K (50W), 35K, 40K, 50K 110V-277V Power Factor >0.90 Size Weight Dimming -20ºF-122ºF 2x2: L x W x 2.6 H 2x4: L x W x 2.6 H 2x2 at 5.3lbs 2x4 at 10.8lbs 0-10V dimmable UL DLC 4.2 Premium Aleddra s EasiFit Troffer Retrofit Kit is an energy-efficient and cost-effective replacement for an existing linear troffer luminaire. It fits into the existing troffer housing, saving the labor of removing it and the trouble of disposing it. It also provides a more aesthetic appearance than the old fixture. The 0-10V dimming makes it controllable by the daylighting harvest system for further energy savings. 7-year (10-year optional) The EasiFit Troffer Kitis UL/DLC certified for utility rebate. Photos Size AT-R4--XDZ-35K AT-R4--XDZ-40K AT-R4--XDZ-50K AT-R4-25W-XDZ-35K AT-R4-25W-XDZ-40K AT-R4-25W-XDZ-50K AT-R4-3-XDZ-35K AT-R4-3-XDZ-40K AT-R4-3-XDZ-50K AT-R7-25W-XDZ-35K AT-R7-25W-XDZ-40K AT-R7-25W-XDZ-50K AT-R7-3-XDZ-35K AT-R7-3-XDZ-40K AT-R7-3-XDZ-50K 2x2 2x2 2x2 2x2 2x2 2x2 2x2 2x2 2x2 2x4 2x4 2x4 2x4 2x4 2x4 25W 25W 25W W 25W 25W info@.com sales@.com

18 UFO Highbay Fixture 100W, 150W, 200W, 300W, 400W, 500W Saves up to 70% energy as compared to existing highbay fixtures Stylish and modern design and a lower profile Designed for indoor lowbay or highbay application IP65 rated for dry, damp, and wet locations Microwave motion sensor optional Daylight sensor optional Yoke mount bracket optional Aluminum reflector optional Polycarbonate reflector optional Driver Meanwell driver >130 LPW 100/150/200/300/400W CRI > 80 (90CRI optional) Input Voltage 110V-277V Operating Temp. -20ºF-122ºF Dimming 1-10V dimmable IP Rating IP65 Beam Angle 120º 5-year/50,000 hours UL DLC 4.2 Aleddra s UFO luminaire features a stylish design and a lower profile. It is designed for any indoor lowbay or highbay applications. It saves up to 70% energy as compared to the existing highbay fixtures. AHB-10W11A1BUP-A AHB-12A1BUP-A AHB-20W19A1BUS- AHB-30W26A1BUP- AHB-A2B- AHB-50WA2B-A 100W 150W 200W 300W 400W 500W The default color is and other colors are made to order. It can also accommodate the customer s need for spcial beam angles: 30, 60, 90, or 120 degrees. * 30K, 35K, 40K models made to order * 30, 60, 90, 150 degree beam angle made to order info@.com sales@.com

19 Emergency UFO Highbay Fixture 100W, 150W Luminous 130LM/W CRI >80 Emergency Driver Kit: 1050mA output Current Programmable constant current Open Circuit Protection Short Circuit Protection Time to light: 0.3s from detection of emergency event Easy to install Dimmable 5-year warranty UL, DLC Input Voltage AC V Power Factor > W, 150W Beam Angle 110º Lighting Output When on Battery Emergency Time 1, 2080lm 90 minutes 5-year warranty Aleddra s UFO highbay fixture with Emergency Driver Kit is a cost-effective and energy-efficient option for various emergency lighting applications such as warehouses, manufacturing facilities, school gymnasiums, community centers, recreation centers, and department stores. It features a stylish design and a lower profile. It is designed for any indoor lowbay or highbay applications. This Emergency UFO Highbay Fixture comes with 5-year warranty. Model # AL-UFO12-100W-110-H-50K-EB AL-UFO15-150W-110-H-50K-EB 100W 150W info@.com sales@.com

20 Linear Highbay Fixture 150W, 2, 320W Saves up to 70% energy as compared to existing highbay fixtures Meanwell driver 0-10V dimming by default Motion sensor: optional ETL DLC 4.2 >103 LPW CRI > 80 Beam Angle 120º Input Voltage 110V-277V Operating Temp. -20ºF-122ºF Dimming 0-10V Aleddra s Highbay Fixture features a stylish design and a slim profile. It is designed for any indoor lowbay or highbay application. It saves 70% energy as compared to existing highbay fixtures. It is DLC 4.2 qualified for utility rebate application. 5-year/50,000 hours Size AHLB-421-W150-50K AHLB-420-W240-50K AHLB-420-W320-50K 150W 2 320W lm lm lm 2x3 2x4 2x4 * 30K, 35K, 40K models are made to order * 480V driver made to order info@.com sales@.com

21 Slim Vapor Tight Size 2ft,, 120lm/w CRI 82 Beam Angle 270º Input Voltage VAC Power Factor >0.9 Operating Temp. -14ºF to 104ºF Rated Life 50,000 hours 5-year warranty Sizes:,, Unique design and appearance, wide beam angle Various Product Applications: Parking lots, gas stations, supermarkets, office indoor lighting and more. Motion Sensor (optional) Emergency Backup (optional) 180 minutes on battery ( light output) Battery check by remote control 5-year warranty UL certified IP65 rated DLC 4.2 The Slim Vapor Tight is the best quality enclosure. It has a unique appearance and has a wide beam angle. Its built-in aluminum heat sink provides cooling and improves safety. It is IP65 rated. Optional features include the Motion Sensor and the Emergency Backup. Dimensions Before Type, 20W, 3, 70W Length Height Width After AVT-2FT-20W-50K AVT-2FT-20W-50K-MS AVT-2FT-25W-50K-EB AVT-2FT-25W-50K-MS+EB AVT-4FT-3-50K AVT-4FT-3-50K-MS AVT-4FT-45W-50K-EB AVT-4FT-45W-50K-MS+EB AVT-8FT-70W-50K AVT-8FT-70W-50K-MS AVT-8FT-70W-50K-EB AVT-8FT-70W-50K-MS+EB Size 20W 20W 25W 25W W 45W 70W 70W 70W 70W *MS (Motion Sensor) *EB (Emergency Backup) *Other colors made to order

22 LED Flood Light, 70W Driver CRI > 70 Input Voltage Operating Temp. Power Factor >0.90 AL-FL220-W K AL-FL220-W K AL-FL220-W K AL-FL280-W K AL-FL280-W K AL-FL280-W K AL-FL330-W K AL-FL330-W K AL-FL330-W K AL-FL390-W K AL-FL390-W K AL-FL390-W K AL-FL390-W K AL-FL390-W K AL-FL390-W K AL-FL675-W K AL-FL675-W K AL-FL675-W K AL-FL675-W K AL-FL675-W K AL-FL675-W K Meanwell driver LM/W 30K, 40K, 50K 30W to 600W 110V-277V (50-60Hz) -40ºF-122ºF 5-year warranty 30W 30W 30W 50W 50W 50W 100W 100W 100W W 210W 210W 400W 400W 400W 600W 600W 600W Weight info@.com sales@.com Compact and light weight, wide range of wattage Higher wattage models can be used for sports field lighting Samsung LED diodes Yoke mount bracket with easy lighting direction adjustment IP65 for wet location ETL DLC Aleddra s LED Flood Light is designed with versatility in mind. It s compact and light weight. It comes in a wide range of wattage, from 30W to 600W, for all types of outdoor lighting applications. The higher wattage models can be used for spor ts field lighting. Its yoke mount bracket provides easy adjustment for different lighting direction. When mounting on the building, it can be used as a good wallpack fixture. It can also be used on the ground or as a wall wash light. The default beam angle is 60 degrees. We also offer many other beam angles on a made-to-order basis. 400W: 28 H x 21 W 600W: 28 H x 27 W

23 LED DMD Flood Light 100W, 150W, 200W Compact and light weight, wide range of wattage Higher wattage models can be used for sports field lighting Samsung LED diodes Yoke mount bracket with easy lighting direction adjustment IP65 for wet location ETL DLC CRI > 80 > 120 LM/W Beam Angle 110º Input Voltage Operating Temp. 100W, 150W, 200W 110V-277V (50-60Hz) -40ºF-122ºF Size 10.83" x 12.22" x2.26" 17.7" x 13.7" x 2.34" 17.7" x 13.7" x 2.34" 5-year warranty Aleddra s DMD Flood Light is designed with versatility in mind. It s compact and light weight. It comes in a wide range of wattage, from 100W to 200W, for all types of outdoor lighting applications. The higher wattage models can be used for spor ts field lighting. Its yoke mount bracket provides easy adjustment for different lighting direction. When mounting on the building, it can be used as a good wallpack fixture. It can also be used on the ground or as a wall wash light. The default beam angle is 110 degrees. AFL-10S-100W-A-L-P- AFL-15S-150W-A-L-P- AFL-20S-200W-A-L-P- 100W 150W 200W info@.com sales@.com

24 Slim Shoebox Fixture 80W, 100W, 150W, 200W, 300W Lens Type Type III and Type V Driver Meanwell driver 123 LPW 80W - 300W 50K (other colors optional) CRI >82 Input Voltage 110V-277V Power Factor >0.90 Operating Temp. -40ºF-140ºF Dimming Wireless dimming optional Rated Life up to 50,000 hours 5-year warranty NEMA 5-pin receptacle built-in Energy-efficient and cost-effective replacement for existing parking lot lighting luminaire Slim exterior design yields less wind drag, protective cover on the back prevents bird from nesting Light Distribution: Type III & Type V Surge protection Options: Wireless dimming controller, Photocell, 480V driver, square/round mounting brackets IP65 wet location UL DLC 4.0 Aleddra s Slim Shoebox luminaire is an energy-efficient and cost-effective replacement for existing parking lot lighting luminaires. Its slim exterior design yields less wind drag and the protective cover on the back prevents bird from nesting on top of the fixture. It is UL certified for wet location lighting and comes with IP65 rating. The default mounting option is a slipfitter. Other square and round brackets are available upon request and can be easily serviceable in the field. ASB-SBL-3-80W-50K-PC ASB-SBL-3-100W-50K-PC ASB-SBL-3-150W-50K-PC ASB-SBL-3-200W-50K-PC ASB-SBL-3-300W-50K-PC Other color made to order. 80W 100W 150W 200W 300W Light Output 9840 lm lm lm lm lm Optional: Photo Cell, Wireless dimming controller, 480V driver Square/Round mounting brackets info@.com sales@.com Brakcet-SBL-E2 (For Round Pole) Brakcet-SBL-D2 (For Square Pole) Dimension: 30 x14.5 x3.5 Weight: 200W 27.6 lbs, 300W 28.4 lbs Brakcet-SBL-U2 (For Wall Mount) The fixture is warranted for 5 years and the LED diodes can exceed 100,000 hours. As an option, the fixture can be equipped with a 7-pin NEMA receptacle for use with a 3-in-1 wireless controller that allows the facility management team to turn on/off, set dimming level, schedule photocell activation, and program multiple fixtures through a centralized wireless lighting management system.

25 3-in-1 Wireless Controller & System Ethernet Gateway Wireless Controller Wireless Controller Lite Microwave Sensor Network Type: Star-mesh repeater Range: 3 km line of sight Standard: IEEE Frequency: MHz Power: +24 dbm Number of controllers supported: 2,000 Connection: 3G Cellular or 10/100 Ethernet Temperature: -22 to 158 F Input voltage: 120V (transformer needed for 277V) Cellular carrier certified IP66 rated FCC and IC compliant 5-year limited warranty Microwave Sensor Detecting range: Pedestrian: 100 Small vehicle: 165 Truck: 400 Connection to TOP900 wireless controller Bi-level timeout, tri-level timeout IP65 Power: +24 dbm Temperature: -22 to 158 F Size: 3.5 x3.5 x3.5 FCC approved, UL listed 5-year limited warranty TOP900TLX TOP900TLX-E MWX-LVE-180U LumeWave Gateway 2.0 Luminsight Desktop Central Management Software Product Wireless Controller Wireless Controller Lite Microwave Sensor Ethernet Gateway Lighting Management System TOP900LTX/E Wireless Controller 3-in-1 wireless controller: Wireless on-off and dimming (0-10V) Integrated Photo-cell Centralized lighting management Input voltage: V (480V optional) Motion sensor (optional) Secure AES 128-bit encryption Wireless standard: IEEE Frequency: MHz Range: 1 mile IP66 FCC approved, UL 916/773 listed, RoHS compliant Title 24 compliant 5-year limited warranty info@.com sales@.com

26 Slim Lowbay Canopy, 70W Driver Meanwell driver 105 LM/W CRI > 80 Input Voltage 110V-277V Power Factor >0.95 Operating Temp. -40ºF-122ºF Rated Life up to 50,000 hours 5-year warranty Energy-efficient & cost-effective replacement for existing traditional lowbay canopy luminaire Built with top of the line LEDs and the reputable Meanwell driver IP65 wet location Die-cast aluminum housing Ideal for parking garage or low-ceiling canopy lighting applications Mounting Options: Surface mount, Pole mount, Base-plate mount UL DLC 4.0 Aleddra s Slim Lowbay Canopy Luminaire is an energy efficient and cost-effective replacement for an existing traditional lowbay canopy luminaire. It s built with top of the line LEDs and the reputable Meanwell driver, which means, fewer maintenance costs. Replacing Weight Its IP65 rating makes it ideal for wet locations. The Slim Lowbay Canopy Luminaire is UL certified and DLC qualified for utility rebate. It comes with a 5-year warranty and rated life up to 50,000 hours. ACP K ACP-24-70W-50K 70W W 250W 5.5lbs 6.4lbs The application is ideal for parking garage or low-ceiling canopy lighting applications. * in stock, other colors made to order Dimension: 10.5 x 10.5 x 4 Option A: Surface Mount Option B: Pole Mount Option C: Base-plate mount info@.com sales@.com

27 Quick Mounting Wall Pack AWP-WPL 4 Series Vandal Guard Light Guard More than 85% light transmission glass lens Application: outdoor walkways, security lighting, building entrances, schools, museum and commercial building Back fins on base cover, providing efficient heat dissipation Photocell installed by default 0-10V dimmable for great energy savings Light guard for dark-sky compliance (optional) Vandal protection guard (optional) Photo control and motion sensor (optional) 5-year warranty UL, DLC 4.3 IP65 rated lm/w CRI >80 Input Voltage 110V-277V The Quick Mounting Wall Pack is an energy-efficient and cost-effective replacement for the existing wallpack luminaire. Ideal for wet location with its IP65 rating. Superior die-cast aluminum housing with high-durability and long lasting color. A light guard can be attached to the fixture for dary-sky compliant application. Vandal protection guard is also available. Operating Temp. -40ºF-140ºF, 60W, 80W, 120W Power Factor >0.94 Photocell Built-in AWP-WPL-4--50K AWP-WPL-4-60W-50K AWP-WPL-4-90W-50K AWP-WPL-4-120W-50K 60W 90W 120W 4320lm 6545lm 9800lm 12720lm Dimmable 0-10V Rated Life up to 76,000 hours Dimensions 5-year warranty Size 40/60W: 9.25 x /120W: 8.9 x info@.com sales@.com

28 LED Garden Light CRI 70 Application: Pedestrian street, factory, schools, garden, courtyard, hotel, parking lot, public park Lighter in weight Cost-effective Dimmable Samsung LED chips producing brighter lighting IP65 for wet locations Photocell optional 5-year warranty ETL Input Voltage 110V-277V Operating Temp. -40ºF to 140ºF 20W, 35W, 50W, 100W Beam Angle 100*140º Power Factor > year warranty The Garden Light is a cost-effective and high performance option for various applications such as pedestrian streets, factories, schools, gardens, and more. It has an elegant appearance, excellent structure, and is lighter in weight. It is IP65 rated for wet locations. Model # Dimensions AGL-260-W020-Y1-Z1 () AGL-260-W020-Y1-Z1 () AGL-260-W020-Y1-Z1 () AGL-260-W035-Y1-Zn() AGL-260-W035-Y1-Zn() AGL-260-W035-Y1-Zn() AGL-325-W50-Y1-Z1 () AGL-325-W50-Y1-Z1 () AGL-325-W50-Y1-Z1 () AGL-325-W100-Y1-Z1 () AGL-325-W100-Y1-Z1 () AGL-325-W100-Y1-Z1 () 20W 20W 20W 35W 35W 35W 50W 50W 50W 100W 100W 100W info@.com sales@.com Beam Angle: 100*140º

29 Cobra Head LED Lamp for Parking/Street Light Retrofit CRI >70 Input Voltage AC V Operating Temp. -4ºF to 113ºF Beam Angle 90*150º Lamp Base 54W, 75W, 95W, lm/w E39 Power Factor >0.9-54W - 75W - 95W year warranty Stylish design with slim body for retrofit Force air circulation with fan Ideal retrofit option for Parking Lot and Street Light fixtures Philips LED Type III distribution by default Direct wire (ballast bypass) Rated for enclosed fixtures only 5-year warranty UL, DLC 4.3 The Street Light Retrofit Lamp is a cost-effective and high performance replacement lamp for outdoor pole/arm-mounted area and roadway luminaires (Type B). It is an ideal retrofit option for metal halide lamp. It fits on many different fixtures to replace traditional lamps. It is rated for enclosed Cobra Head street light fixture. 180 Retrofit Lamp Application Model # Replace HID/MH Dimensions ALC-CLH-54W1A2E ALC-CLH-75W1A1E ALC-CLH-95W1A1E ALC-CLH-11A1E 54W 75W 95W lm lm lm lm 175W 250W 300W 400W 9.6*4.4* *5.4* *5.4* *5.4*3.4 * Type V lens made to order * Other color temperatures made to order info@.com sales@.com

30 EasiFit Shop Light, Daisy-chainable up to 10 fixtures Cost-effective Easy installation Light weight On/off switch on the fixture 5-year warranty ETL 30K, 40K, 50K 12W, 23W >95lm/w Length : 28.4, : 47.2 Input Voltage 110V-277V Power Factor >0.9 Light Output 12W: 1200lm, 23W: 2200lm Operating Temp. 14ºF-104ºF Aleddra EasiFit Shop Light is perfect for any application where high quality LED lighting is required, such as workshops, garages, storage areas, and basements. The light-weight nature of this LED Shop Light allows for easy installation. It is ETL certified and comes with a 5-year warranty. This LED Light fixture will provide significant savings with regards to your operational costs. Rated Life up to 30,000 hours 5-year warranty Length ASL-SELTF6-12W-830 ASL-SELTF6-12W-840 ASL-SELTF6-12W-850 ASL-SELTF12-23W-830 ASL-SELTF12-23W-840 ASL-SELTF12-23W W 12W 12W 23W 23W 23W info@.com sales@.com