IECEx Certificate of Conformity

Transcription

1 Certificate : IECEx CSA X Page 1 of 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit issue No.:4 Status: Current Date of Issue: Page 1 of 5 Certificate history: Issue No. 4 ( ) Issue No. 3 ( ) Issue No. 2 ( ) Issue No. 1 ( ) Issue No. 0 ( ) Applicant: Honeywell International Inc. 512 Virginia Drive Fort Washington, PA Electrical Apparatus: Optional accessory: XYR 6000 Wireless Transmitter Type of Protection: Ex ia IIB T4; Ex d [ia] IIB T4; Ex na [nl] IIC T4; DIP A20/A21/A22 IP 66 T90 C Marking: Manufacturers Name Model Number Serial Number Ex ia IIB T4 Ta = 70 C: DIP A20 IP66 T90 C Ex d [ia] IIB T4 Ta = 70 C: DIP A21 IP66 T90 C Ex na [nl] IIC T4 Ta = 84 C: DIP A22 IP66 T90 C Approved for issue on behalf of the IECEx Certification Body: Position: D R Stubbings BA MIET Technical Manager Signature: (for printed version) Date: 1. This certificate and schedule may only be reproduced in full. 2. This certificate is not transferable and remains the property of the issuing body. 3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website. Certificate issued by: CSA International 178 Rexdale Boulevard Toronto, Ontario M9W IR3 Canada and th Street Edmonton, AB T6N 1E6 Canada

2 Certificate : IECEx CSA X Page 2 of 5 Page 2 of 5 Manufacturer: Honeywell International Inc. 512 Virginia Drive Fort Washington, PA U.S.A. Manufacturing location(s): Honeywell International Inc. Honeywell Process Solutions 525 East Market Street York, PA USA This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended. STANDARDS: The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards: IEC : 2004 Edition: 4.0 IEC : 2003 Edition: 5 IEC : 1999 Edition: 4 IEC : 2001 Edition: 2 IEC : 1999 Edition: 2 Electrical apparatus for explosive gas atmospheres - Part 0: General requirements Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosure 'd' Electrical apparatus for explosive gas atmospheres - Part 11: Intrinsic safety 'i' Electrical apparatus for explosive gas atmospheres - Part 15: Type of protection 'n' Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above. TEST & ASSESSMENT REPORTS: A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in Test Report: CA/CSA/ExTR /00 CA/CSA/ExTR /01 CA/CSA/ExTR /02 CA/CSA/ExTR /03 CA/CSA/ExTR /04 Quality Assessment Report: NL/KEM/QAR /00 NL/KEM/QAR /01 NL/KEM/QAR /02

3 Certificate : IECEx CSA X Page 3 of 5 Page 3 of 5 Schedule EQUIPMENT: Equipment and systems covered by this certificate are as follows: STDW924-abc def-g,h,i,3j-kkkk (1 bar Differential Pressure Transmitter), MWP 4500 psi (31 Mpa) STDW930-abc def-g,h,i,3j-kkkk (7 bar Differential Pressure Transmitter), MWP 4500 psi (31 Mpa) STDW974-abc def-g,h,i,3j-kkkk (210 bar Differential Pressure Transmitter), MWP 4500 psi (31 Mpa) STGW944-abc def-g,h,i,3j-kkkk (35 bar Gauge Pressure Transmitter), MWP 500 psi (3.5 Mpa) STGW974-abc def-g,h,i,3j-kkkk (210 bar Gauge Pressure Transmitter), MWP 3000 psi (20.7 Mpa) STGW94L-abc def-g,h,i,3j-kkkk (35 bar Gauge Pressure Transmitter), MWP 500 psi (3.5 Mpa) STGW97L-abc def-g,h,i,3j-kkkk (210 bar Gauge Pressure Transmitter), MWP 3000 psi (20.7 Mpa) STGW98L-abc def-g,h,i,3j-kkkk (415 bar Gauge Pressure Transmitter), MWP 6000 psi (41.4 Mpa) STGW99L-abc def-g,h,i,3j-kkkk (690 bar Gauge Pressure Transmitter), MWP psi (68.9 Mpa) STAW94L-abc def-g,h,i,3j-kkkk (35 bar Absolute Pressure Transmitter), MWP 500 psi (3.5 Mpa) CETW6000M-W fgghh-2e,jjjj (Wireless Corrosion Transmitter), -30 to 85 ºC CETW6000M-D fgghh-2e,jjjj (Corrosion Data Logger), -30 to 85 ºC Refer to EQUIPMENT (continued) for additional models CONDITIONS OF CERTIFICATION: YES as shown below: Parts of the antenna are non-conducting and the area of the non-conducting part exceeds the maximum permissible areas for Category II 1 G (Zone 0) according to IEC Therefore when the antenna is used within a potentially explosive atmosphere, appropriate measures must be taken to prevent electrostatic discharge. Impact and friction hazardous need to be considered according to IEC when the transmitter exposed to the exterior atmosphere is made of light metal alloys, and used in Category II 1 G (Zone 0).

4 Certificate : IECEx CSA X Page 4 of 5 Page 4 of 5 EQUIPMENT(continued): STIW abc-d,e,f,Cj-kkkk (Analog Input Transmitter) STTW abc-d,e,f,Cj-kkkk (Temperature Transmitter w/remote sensor) STTW abc-d,e,f,3j-kkkk (Temperature Transmitter With 2 Digital Inputs) STTW a,b,c-def-g0h0-2i-j-kkkk (Temperature Transmitter w/rigid sensor), MWP 3000 psi (20.5 Mpa) STTW a,b,c-def-g-h00-ijklm-Cn-p-qqqq (Temperature Transmitter w/threaded or socket weld) STTW abc-def-g-h00-ijklm-Cn-p-qqqq (Temperature Transmitter w/flanged spring loaded sensor), MWP 3000 psi (20.7 Mpa) STXW abc-d,e,f,Cg-hhhh (Digital Input Transmitter With 3 Digital Inputs) STUW abc-def-Cg-hhhh (Wireless Universal I/O Transmitter Three Inputs: 4-20 ma Analog, T/C's, mv, or DI (Switch)) STUW abc-def-Cg-hhhh (Wireless Universal I/O Transmitter Two Inputs: 4-20 ma Analog, T/C, mv or DI and One Digital Output (Solid State))

5 Certificate : IECEx CSA X Page 5 of 5 Page 5 of 5 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above): Issue 1: Update to include digital input terminals - which creates Models STTW401 and STXW500. Issue 2: Update to include: - Addition of 24Vdc Power Supply PCB asembly option, P/N Addition of Models STUW700 and STUW701, Wireless Universal I/O Transmitters. - Revisions to existing drawings and to model code. Issue 3: Update to include removable battery pack. Issue 4: Update to include: - Revision to the Model code. - Addition of the Model STGW99L, 690 Bar Gauge Pressure Transmitter.