Bygningskomponenters termiske ydeevne Dynamisk-termiske egenskaber Beregningsmetoder
|
|
- Edgar Griffith
- 5 years ago
- Views:
Transcription
1 Dansk standard DS/EN ISO udgave Bygningskomponenters termiske ydeevne Dynamisk-termiske egenskaber Beregningsmetoder Thermal performance of building components Dynamic thermal characteristics Calculation methods
2 DS/EN ISO København DS projekt: M ICS: Første del af denne publikations betegnelse er: DS/EN ISO, hvilket betyder, at det er en international standard, der har status både som europæisk og dansk standard. Denne publikations overensstemmelse er: IDT med: ISO 13786:2007. IDT med: EN ISO 13786:2007. DS-publikationen er på engelsk. Denne publikation erstatter: DS/EN ISO 13786:2000. DS-publikationstyper Dansk Standard udgiver forskellige publikationstyper. Typen på denne publikation fremgår af forsiden. Der kan være tale om: Dansk standard standard, der er udarbejdet på nationalt niveau, eller som er baseret på et andet lands nationale standard, eller standard, der er udarbejdet på internationalt og/eller europæisk niveau, og som har fået status som dansk standard DS-information publikation, der er udarbejdet på nationalt niveau, og som ikke har opnået status som standard, eller publikation, der er udarbejdet på internationalt og/eller europæisk niveau, og som ikke har fået status som standard, fx en teknisk rapport, eller europæisk præstandard DS-håndbog samling af standarder, eventuelt suppleret med informativt materiale DS-hæfte publikation med informativt materiale Til disse publikationstyper kan endvidere udgives tillæg og rettelsesblade DS-publikationsform Publikationstyperne udgives i forskellig form som henholdsvis fuldtekstpublikation (publikationen er trykt i sin helhed) godkendelsesblad (publikationen leveres i kopi med et trykt DS-omslag) elektronisk (publikationen leveres på et elektronisk medie) DS-betegnelse Alle DS-publikationers betegnelse begynder med DS efterfulgt af et eller flere præfikser og et nr., fx DS 383, DS/EN 5414 osv. Hvis der efter nr. er angivet et A eller Cor, betyder det, enten at det er et tillæg eller et rettelsesblad til hovedstandarden, eller at det er indført i hovedstandarden. DS-betegnelse angives på forsiden. Overensstemmelse med anden publikation: Overensstemmelse kan enten være IDT, EQV, NEQ eller MOD IDT: Når publikationen er identisk med en given publikation. EQV: Når publikationen teknisk er i overensstemmelse med en given publikation, men præsentationen er ændret. NEQ: Når publikationen teknisk eller præsentationsmæssigt ikke er i overensstemmelse med en given standard, men udarbejdet på baggrund af denne. MOD: Når publikationen er modificeret i forhold til en given publikation.
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO December 2007 ICS ; Supersedes EN ISO 13786:1999 English Version Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2007) Performance thermique des composants de bâtiment - Caractéristiques thermiques dynamiques - Méthodes de calcul (ISO 13786:2007) This European Standard was approved by CEN on 7 December Wärmetechnisches Verhalten von Bauteilen - Dynamischthermische Kenngrößen - Berechnungsverfahren (ISO 13786:2007) CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 13786:2007: E
4 EN ISO 13786:2007 (E) Contents Page Foreword...3 2
5 EN ISO 13786:2007 (E) Foreword This document (EN ISO 13786:2007) has been prepared by Technical Committee ISO/TC 163 "Thermal performance and energy use in the built environment" in collaboration with Technical Committee CEN/TC 89 "Thermal performance of buildings and building components", the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by June Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 13786:1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 13786:2007 has been approved by CEN as a EN ISO 13786:2007 without any modification. 3
6
7 INTERNATIONAL STANDARD ISO Second edition Thermal performance of building components Dynamic thermal characteristics Calculation methods Performance thermique des composants de bâtiment Caractéristiques thermiques dynamiques Méthodes de calcul Reference number ISO 13786:2007(E) ISO 2007
8 ISO 13786:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel Fax copyright@iso.org Web ii ISO 2007 All rights reserved
9 ISO 13786:2007(E) Contents Page Foreword... iv Introduction... v 1 Scope Normative references Terms, definitions, symbols and units Terms and definitions Symbols and units Subscripts Other symbols Period of the thermal variations Data required Heat transfer matrix of a multi-layer component General Procedure Heat transfer matrix of a homogeneous layer Heat transfer matrix of plane air cavities Heat transfer matrix of a building component Dynamic thermal characteristics Characteristics for any component Characteristics for components consisting of plane and homogeneous layers Report Calculation report Summary of results Annex A (normative) Simplified calculation of the heat capacity Annex B (informative) Principle of the method and examples of applications Annex C (informative) Further information for computer programming Annex D (informative) Examples Bibliography ISO 2007 All rights reserved iii
10 ISO 13786:2007(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2, Calculation methods. This second edition cancels and replaces the first edition (ISO 13786:1999), which has been technically revised. The following principal changes have been made to the first edition: all equations in Clause 3 have been reviewed and corrected as appropriate; the definition of heat capacity ( ) has been modified; all equations in and have been reviewed and corrected as appropriate; contains a new equation for periodic thermal transmittance, and a new note; Equation (A.4) has been corrected; B.2 has undergone minor revisions; Table C.1 has been added; Annex D contains amended examples to align with changes to the formulae in the main body of the text. iv ISO 2007 All rights reserved
11 ISO 13786:2007(E) Introduction This International Standard provides the means (in part) to assess the contribution that building products and services make to energy conservation and to the overall energy performance of buildings. The dynamic thermal characteristics of a building component describe the thermal behaviour of the component when it is subject to variable boundary conditions, i.e. variable heat flow rate or variable temperature on one or both of its boundaries. In this International Standard, only sinusoidal boundary conditions are considered: boundaries are submitted to sinusoidal variations of temperature or heat flow rate. The properties considered are thermal admittances and thermal dynamic transfer properties, relating cyclic heat flow rate to cyclic temperature variations. Thermal admittance relates heat flow rate to temperature variations on the same side of the component. Thermal dynamic transfer properties relate physical quantities on one side of the component to those on the other side. From the aforementioned properties, it is possible to define the heat capacity of a given component which quantifies the heat storage property of that component. The dynamic thermal characteristics defined in this International Standard can be used in product specifications of complete building components. The dynamic thermal characteristics can also be used in the calculation of: the internal temperature in a room; the daily peak power and energy needs for heating or cooling; the effects of intermittent heating or cooling, etc. ISO 2007 All rights reserved v
12
13 INTERNATIONAL STANDARD ISO 13786:2007(E) Thermal performance of building components Dynamic thermal characteristics Calculation methods 1 Scope This International Standard specifies the characteristics related to the dynamic thermal behaviour of a complete building component and provides methods for their calculation. It also specifies the information on building materials required for the use of the building component. Since the characteristics depend on the way materials are combined to form building components, this International Standard is not applicable to building materials or to unfinished building components. The definitions given in this International Standard are applicable to any building component. A simplified calculation method is provided for plane components consisting of plane layers of substantially homogeneous building materials. Annex A specifies simpler methods for the estimation of the heat capacities in some limited cases. These methods are suitable for the determination of dynamic thermal properties required for the estimation of energy use. These approximations are not appropriate, however, for product characterization. Annex B gives the basic principle and examples of applications of the dynamic thermal characteristics defined in this International Standard. Annex C provides information for programming the calculation method. Annex D gives examples of calculation for a building component. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6946, Building components and building elements Thermal resistance and thermal transmittance Calculation method ISO 7345, Thermal insulation Physical quantities and definitions ISO 10211, Thermal bridges in building construction Heat flows and surface temperatures Detailed calculations ISO 2007 All rights reserved 1
Fodværn Metoder til prøvning af fodtøj
Dansk standard DS/EN ISO 20344 2. udgave 2012-02-02 Fodværn Metoder til prøvning af fodtøj Personal protective equipment Test methods for footwear DS/EN ISO 20344 København DS projekt: M239519 ICS: 13.340.50
More informationÅndedrætsværn Prøvningsmetoder Del 7: Bestemmelse af partikelfilterpenetration
Dansk standard DS/EN 13274-7 2. udgave 2008-02-22 Åndedrætsværn Prøvningsmetoder Del 7: Bestemmelse af partikelfilterpenetration Respiratory protective devices Methods of test Part 7: Determination of
More informationFertilizers Determination of ammoniacal nitrogen
Dansk standard DS/EN 15475 1. udgave 2009-02-16 Gødning Bestemmelse af ammoniumnitrogen Fertilizers Determination of ammoniacal nitrogen DS/EN 15475 København DS projekt: M229378 ICS: 65.080 Første del
More informationBygningskomponenter og bygningsdele Værdier for termisk isolans og transmissionskoefficient Beregningsmetode
Dansk standard DS/EN ISO 6946 2. udgave 2008-02-13 Bygningskomponenter og bygningsdele Værdier for termisk isolans og transmissionskoefficient Beregningsmetode Building components and building elements
More informationSikring af rumfartsprodukter Fejltræsanalyse Meddelelse om godkendelse af ECSS/IEC 61025
Dansk standard DS/EN 16602-40-12 1. udgave 2014-11-13 Sikring af rumfartsprodukter Fejltræsanalyse Meddelelse om godkendelse af ECSS/IEC 61025 Space product assurance Fault tree analysis Adoption notice
More informationRailway applications Automated urban guided transport (AUGT) Safety requirements
Dansk standard DS/EN 62267 1. udgave 2010-01-21 Jernbaneanvendelser Automatiske sporbundne bytransportsystemer (AUGT) Sikkerhedskrav Railway applications Automated urban guided transport (AUGT) Safety
More informationMedicinske termometre Del 2: Termometre med faseskift (punktmatrix)
Dansk standard DS/EN 12470-2 + A1 2. udgave 2009-07-20 Medicinske termometre Del 2: Termometre med faseskift (punktmatrix) Clinical thermometers Part 2: Phase change type (dot matrix) thermometers DS/EN
More informationKatodisk beskyttelse af stål i beton
Dansk standard DS/EN ISO 12696 1. udgave 2012-02-24 Katodisk beskyttelse af stål i beton Cathodic protection of steel in concrete DS/EN ISO 12696 København DS projekt: M245256 ICS: 25.220.40 Første del
More informationLastsikring på køretøjer Sikkerhed Del 3: Surringskæder
Dansk Standard DS/EN 12195-3 1. udgave 2001-05-04 Lastsikring på køretøjer Sikkerhed Del 3: Surringskæder Load restraint assemblies on road vehicles Safety Part 3: Lashing chains DS/EN 12195-3 København
More informationEmballage Brailleskrift på emballage til lægemidler
Dansk standard DS/EN ISO 17351 1. udgave 2014-08-19 Emballage Brailleskrift på emballage til lægemidler Packaging Braille on packaging for medicinal products DS/EN ISO 17351 København DS projekt: M283813
More informationBæredygtighed inden for byggeri og anlæg Vurdering af bygningers miljømæssige kvalitet Beregningsmetode
Dansk standard DS/EN 15978 1. udgave 2012-01-24 Bæredygtighed inden for byggeri og anlæg Vurdering af bygningers miljømæssige kvalitet Beregningsmetode Sustainability of construction works Assessment of
More informationBefæstelseselementer Tynde låsemøtrikker med ikke-metallisk indlæg
Dansk standard DS/EN ISO 10511 2. udgave 2013-02-12 Befæstelseselementer Tynde låsemøtrikker med ikke-metallisk indlæg Prevailing torque type hexagon thin nuts (with nonmetallic insert) DS/EN ISO 10511
More informationIsolerende væsker Måling af relativ permittivitet, dielektrisk tabsfaktor (tan ) og jævnstrømsmodstand
Dansk standard DS/EN 60247 1. udgave 2004-05-13 Isolerende væsker Måling af relativ permittivitet, dielektrisk tabsfaktor (tan ) og jævnstrømsmodstand Insulating liquids - Measurement of relative permittivity,
More informationAnimalske og vegetabilske fedtstoffer og olier Prøveudtagning
Dansk Standard DS/EN ISO 5555 2. udgave 2002-03-12 Animalske og vegetabilske fedtstoffer og olier Prøveudtagning Animal and vegetable fats and oils Sampling DS/EN ISO 5555 København DS projekt: 44296 ICS:
More informationPrøvning af installationers brandmodstandsevne Del 10: Røgspjæld
Dansk standard DS/EN 1366-10 1. udgave 2011-06-15 Prøvning af installationers brandmodstandsevne Del 10: Røgspjæld Fire resistance tests for service installations Part 10: Smoke control dampers DS/EN 1366-10
More informationRobotter til industrielle omgivelser Sikkerhedskrav Del 1: Robot
Dansk standard DS/EN ISO 10218-1 2. udgave 2009-02-23 Robotter til industrielle omgivelser Sikkerhedskrav Del 1: Robot Robots for industrial environments Safety requirements Part 1: Robot DS/EN ISO 10218-1
More informationPlastics Recycled Plastics Characterisation of plastics wastes
Dansk standard DS/EN 15347 1. udgave 2007-12-19 Plast Genvundet plast Karakterisering af plastaffald Plastics Recycled Plastics Characterisation of plastics wastes DS/EN 15347 København DS projekt: M207657
More informationKlæbestoffer Prøvning af peelstyrke af limede prøveemner, fleksibelt materiale mod stift Del 1: Peelstyrke ved 90 afrivningsvinkel
Dansk standard DS/EN 28510-1 2. udgave 2014-05-08 Klæbestoffer Prøvning af peelstyrke af limede prøveemner, fleksibelt materiale mod stift Del 1: Peelstyrke ved 90 afrivningsvinkel Adhesives Peel test
More informationTandpleje Lyspolymeriseringslamper Del 1: Quartz-tungsten-halogenlamper
Dansk standard DS/EN ISO 10650-1 1. udgave 2005-10-31 Tandpleje Lyspolymeriseringslamper Del 1: Quartz-tungsten-halogenlamper Dentistry Powered polymerization activators Part 1: Quartz tungsten halogen
More informationTermoplastiske elastomerer Nomenklatur og forkortelser på termer
Dansk standard DS/EN ISO 18064 1. udgave 2005-04-08 Termoplastiske elastomerer Nomenklatur og forkortelser på termer Thermoplastic elastomers Nomenclature and abbreviated terms DS/EN ISO 18064 København
More informationTransportable vægsave og trådsave til byggepladser Sikkerhed
Dansk standard DS/EN 15027 + A1 2. udgave 2009-05-07 Transportable vægsave og trådsave til byggepladser Sikkerhed Transportable wall saw and wire saw equipment for job site Safety DS/EN 15027 + A1 København
More informationMetalliske materialer Tyndplade og bånd Bestemmelse af plastisk tøjningsforhold
Dansk standard DS/EN ISO 10113 1. udgave 2014-06-19 Metalliske materialer Tyndplade og bånd Bestemmelse af plastisk tøjningsforhold Metallic materials Sheet and strip Determination of plastic strain ratio
More informationVærktøjsmaskiner Sikkerhed Transfer- og specialmaskiner
Dansk standard DS/EN 14070 + A1 2. udgave 2009-03-12 Værktøjsmaskiner Sikkerhed Transfer- og specialmaskiner Safety of machine tools Transfer and special-purpose machines DS/EN 14070 + A1 København DS
More informationMiljøledelse Miljømæssig vurdering af anlægsområder og organisationer
Dansk standard DS/EN ISO 14015 1. udgave 2010-07-12 Miljøledelse Miljømæssig vurdering af anlægsområder og organisationer Environmental management Environmental assessment of sites and organizations (EASO)
More informationAseptisk behandling af sundhedsplejeprodukter Del 6: Isolationssystemer
Dansk standard Tillæg DS/EN ISO 13408-6/A1 1. udgave 2013-04-08 Aseptisk behandling af sundhedsplejeprodukter Del 6: Isolationssystemer Aseptic processing of health care products Part 6: Isolator systems
More informationPlast Bestemmelse af krybeegenskaber Del 2: Krybning ved trepunktsbøjningsbelastning
Dansk standard DS/EN ISO 899-2 1. udgave 2003-06-30 Plast Bestemmelse af krybeegenskaber Del 2: Krybning ved trepunktsbøjningsbelastning Plastics Determination of creep behaviour Part 2: Flexural creep
More informationBestemmelse af flammepunkt Pensky-Martens closed cupmetode
Dansk standard DS/EN ISO 2719 1. udgave 2002-12-17 Bestemmelse af flammepunkt Pensky-Martens closed cupmetode Determination of flash point Pensky-Martens closed cup method DS/EN ISO 2719 København DS projekt:
More informationVandundersøgelse Ammoniumnitrogen Flowanalyse (CFA og FIA) og spektrometrisk detektion
Dansk standard DS/EN ISO 11732 2. udgave 2005-10-06 Vandundersøgelse Ammoniumnitrogen Flowanalyse (CFA og FIA) og spektrometrisk detektion Water quality Determination of ammonium nitrogen Method by flow
More informationSterilisation af sundhedsplejeprodukter. Del 1: Generelle krav. Dansk standard DS/EN ISO
Dansk standard DS/EN ISO 11138-1 1. udgave 2006-07-14 Sterilisation af sundhedsplejeprodukter Biologiske indikatorsystemer Del 1: Generelle krav Sterilization of health care products Biological indicators
More informationMetalliske materialer Trækprøvning Del 1: Prøvningsmetode ved rumtemperatur
Dansk standard DS/EN ISO 6892-1 1. udgave 2009-09-27 Metalliske materialer Trækprøvning Del 1: Prøvningsmetode ved rumtemperatur Metallic materials Tensile testing Part 1: Method of test at room temperature
More informationPumper og pumpeenheder til væsker Almene sikkerhedskrav
Dansk standard DS/EN 809 + A1 3. udgave 2009-11-04 Pumper og pumpeenheder til væsker Almene sikkerhedskrav Pumps and pump units for liquids Common safety requirements DS/EN 809 + A1 København DS projekt:
More informationBygningers termiske ydeevne Bestemmelse af bygningers luftgennemtrængelighed Prøvningsmetode med overtryk skabt af ventilator
Dansk standard DS/EN ISO 9972:2015 1. udgave 2015-10-07 Bygningers termiske ydeevne Bestemmelse af bygningers luftgennemtrængelighed Prøvningsmetode med overtryk skabt af ventilator Thermal performance
More informationBrandpumper Centrifugalpumper med ansugningssystem Del 1: Klassifikation Generelt og sikkerhedskrav
Dansk standard DS/EN 1028-1 + A1 2. udgave 2008-09-17 Brandpumper Centrifugalpumper med ansugningssystem Del 1: Klassifikation Generelt og sikkerhedskrav Fire-fighting pumps Fire-fighting centrifugal pumps
More informationGasflasker Genfyldelige sømløse gasflasker Akustisk emissionsprøvning ved periodisk inspektion
Dansk standard DS/EN ISO 16148 1. udgave 2006-05-19 Gasflasker Genfyldelige sømløse gasflasker Akustisk emissionsprøvning ved periodisk inspektion Gas cylinders Refillable seamless steel gas cylinders
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO :2012
Dansk standard DS/EN ISO 11806-1 1. udgave 2012-01-18 Landbrugs- og skovbrugsmaskiner Sikkerhedskrav til og prøvning af bærbare, håndholdte motordrevne buskryddere og græstrimmere Del 1: Maskiner med integreret
More informationViklingstråd Prøvningsmetoder Del 6: Termiske egenskaber
Dansk standard DS/EN 60851-6 2. udgave 2012-09-17 Viklingstråd Prøvningsmetoder Del 6: Termiske egenskaber Winding wires Test methods Part 6: Thermal properties DS/EN 60851-6 København DS projekt: M255773
More informationKosmetik Mikrobiologi Påvisning af Candida albicans
Dansk standard DS/EN ISO 18416 1. udgave 2009-07-07 Kosmetik Mikrobiologi Påvisning af Candida albicans Cosmetics Microbiology Detection of Candida albicans DS/EN ISO 18416 København DS projekt: M235504
More informationPumper Tætningsløse rotodynamiske pumper Klasse 2 Specifikationer
Dansk standard DS/EN ISO 15783 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION Pumper Tætningsløse rotodynamiske pumper Klasse 2 Specifikationer Seal-less rotodynamic pumps Class II
More informationTextilmaskiner Sikkerhedskrav Del 4: Maskiner til fremstilling af garn, tovværk og reb
Dansk standard DS/EN ISO 11111-4 1. udgave 2005-04-25 Textilmaskiner Sikkerhedskrav Del 4: Maskiner til fremstilling af garn, tovværk og reb Textile machinery Safety requirements Part 4: Yarn processing,
More informationVejudstyr Støjafskærmning til dæmpning af trafikstøj Procedurer til vurdering af langtidsydeevne Del 2: Ikke-akustiske karakteristika
Dansk standard DS/EN 14389-2:2015 2. udgave 2015-05-28 Vejudstyr Støjafskærmning til dæmpning af trafikstøj Procedurer til vurdering af langtidsydeevne Del 2: Ikke-akustiske karakteristika Road traffic
More informationGeoteknisk undersøgelse og prøvning - Driftsprøvning Del 12: CPT-sondering
Dansk standard DS/EN ISO 22476-12 1. udgave 2009-08-11 Geoteknisk undersøgelse og prøvning - Driftsprøvning Del 12: CPT-sondering Geotechnical investigation and testing Field testing Part 12: Mechanical
More informationEurocode 3: Stålkonstruktioner Del 5: Pilotering
Dansk standard DS/EN 1993-5 1. udgave 2007-05-29 Eurocode 3: Stålkonstruktioner Del 5: Pilotering Eurocode 3 Design of steel structures Part 5: Piling DS/EN 1993-5 København DS projekt: M215355 ICS: 93.020
More informationJernbaneanvendelser Elektromagnetisk kompatibilitet Del 1: Generelt
Dansk standard DS/EN 50121-1 2. udgave 2006-08-29 Jernbaneanvendelser Elektromagnetisk kompatibilitet Del 1: Generelt Railway applications Electromagnetic compatibility Part 1: General DS/EN 50121-1 København
More informationFOR COMMERCIAL USE OR REPRODUCTION
Dansk standard DS/EN 14985 1. udgave 2007-05-29 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION Kraner Svingkraner Cranes Slewing jib cranes DS/EN 14985 København DS projekt: 19328 ICS:
More informationTrykbærende udstyr til kølesystemer og varmepumper Del 2: Rør Generelle krav
Dansk standard DS/EN 14276-2 + A1 2. udgave 2011-03-29 Trykbærende udstyr til kølesystemer og varmepumper Del 2: Rør Generelle krav Pressure equipment for refrigerating systems and heat pumps Part 2: Piping
More informationFotovoltaik i bygninger Del 1: BIPV-moduler
Dansk standard DS/EN 50583-1:2016 1. udgave 2016-02-29 Fotovoltaik i bygninger Del 1: BIPV-moduler Photovoltaics in buildings Part 1: BIPV modules DS/EN 50583-1:2016 København DS projekt: M264393 ICS:
More informationØjenoptik Oftalmologiske instrumenter Grundlæggende krav og prøvningsmetoder Del 1: Almene krav gældende for alle typer oftalmologiske instrumenter
Dansk standard DS/EN ISO 15004-1 2. udgave 2009-05-12 Øjenoptik Oftalmologiske instrumenter Grundlæggende krav og prøvningsmetoder Del 1: Almene krav gældende for alle typer oftalmologiske instrumenter
More informationMælk Bestemmelse af frysepunkt Termistorkryoskopmetode (referencemetode)
Dansk standard DS/EN ISO 5764 2. udgave 2009-05-20 Mælk Bestemmelse af frysepunkt Termistorkryoskopmetode (referencemetode) Milk Determination of freezing point Thermistor cryoscope method (Reference method)
More informationInjektionsbeholdere og tilbehør Del 4: Injektionsflasker af støbt glas
Dansk standard DS/EN ISO 8362-4 1. udgave 2004-09-29 Injektionsbeholdere og tilbehør Del 4: Injektionsflasker af støbt glas Injection containers and accessories Part 4: Injection vials made of moulded
More informationSterilisation af sundhedsplejeprodukter Kemiske indikatorer Del 1: Generelle krav
Dansk standard DS/EN ISO 11140-1 2. udgave 2009-06-11 Sterilisation af sundhedsplejeprodukter Kemiske indikatorer Del 1: Generelle krav Sterilization of health care products Chemical indicators Part 1:
More informationAnæstesi- og respirationsudstyr Kompatibilitet med oxygen
Dansk standard DS/EN ISO 15001 3. udgave 2011-12-19 Anæstesi- og respirationsudstyr Kompatibilitet med oxygen Anaesthetic and respiratory equipment Compatibility with oxygen DS/EN ISO 15001 København DS
More informationGeometriske produktspecifikationer (GPS) Overfladebeskaffenhed Areal Del 71: Målenormaler i form af software
Dansk standard DS/EN ISO 25178-71 1. udgave 2013-01-15 Geometriske produktspecifikationer (GPS) Overfladebeskaffenhed Areal Del 71: Målenormaler i form af software Geometrical product specifications (GPS)
More informationOlie- og naturgasindustrien Rørsystemer Prøvningsprocedurer for mekaniske connectors
Dansk standard DS/EN ISO 21329 1. udgave 2004-12-01 Olie- og naturgasindustrien Rørsystemer Prøvningsprocedurer for mekaniske connectors Petroleum and natural gas industries Pipeline transportation systems
More informationAkustik - Måling af støj fra kompressorer og vakuumpumper Teknikermetode (Klasse 2)
Dansk standard DS/EN ISO 2151 2. udgave 2008-08-22 Akustik - Måling af støj fra kompressorer og vakuumpumper Teknikermetode (Klasse 2) Acoustics Noise test code for compressors and vacuum pumps Engineering
More informationMetalliske materialer Charpy-pendulslagsejhedsprøvning Del 2: Verifikation af prøvningsmaskiner
Dansk standard DS/EN ISO 148-2 1. udgave 2009-01-23 Metalliske materialer Charpy-pendulslagsejhedsprøvning Del 2: Verifikation af prøvningsmaskiner Metallic materials Charpy pendulum impact test Part 2:
More informationVandundersøgelse Bestemmelse af indholdet af ortofosfat og total fosfor ved flowanalyse (FIA og CFA) Del 1: FIA-metoden
Dansk standard DS/EN ISO 15681-1 1. udgave 2005-10-06 Vandundersøgelse Bestemmelse af indholdet af ortofosfat og total fosfor ved flowanalyse (FIA og CFA) Del 1: FIA-metoden Water quality Determination
More informationBygningsbeslag Panikudgangsbeslag betjent ved vandret stang til brug i flugtveje Krav og prøvningsmetoder
Dansk standard DS/EN 1125 3. udgave 2008-03-04 Bygningsbeslag Panikudgangsbeslag betjent ved vandret stang til brug i flugtveje Krav og prøvningsmetoder Building hardware Panic exit devices operated by
More informationCoatinganlæg Sprøjtekabiner til coating med organiske væsker Sikkerhedskrav
Dansk standard DS/EN 12215 + A1 2. udgave 2009-09-16 Coatinganlæg Sprøjtekabiner til coating med organiske væsker Sikkerhedskrav Coating plants Spray booths for application of organic liquid coating materials
More informationEvaluering og rutineprøvning i billeddiagnostiske afdelinger Del 3-2: Leveringsprøvning Mammografisk røntgenudstyrs billeddiagnostiske egenskaber
Dansk standard DS/EN 61223-3-2 2. udgave 2008-10-03 Evaluering og rutineprøvning i billeddiagnostiske afdelinger Del 3-2: Leveringsprøvning Mammografisk røntgenudstyrs billeddiagnostiske egenskaber Evaluation
More informationUfyrede trykbeholdere Del 1: Generelt
Dansk standard DS/EN 13445-1/Issue 5 7. udgave 2013-10-31 Ufyrede trykbeholdere Del 1: Generelt Unfired pressure vessels Part 1: General DS/EN 13445-1/Issue 5 København DS projekt: M279655 ICS: 23.020.30
More informationJernbaneanvendelser Kommunikations-, signal- og processystemer Sikkerhedsrelateret kommunikation i transmissionssystemer
Dansk standard DS/EN 50159 1. udgave 2010-11-09 Jernbaneanvendelser Kommunikations-, signal- og processystemer Sikkerhedsrelateret kommunikation i transmissionssystemer Railway applications Communication,
More informationIkke-aktive kirurgiske implantater Ledimplantater Særlige krav til hofteledsimplantater
Dansk standard DS/EN ISO 21535 2. udgave 2009-06-11 Ikke-aktive kirurgiske implantater Ledimplantater Særlige krav til hofteledsimplantater Non-active surgical implants Joint replacement implants Specific
More informationBelysningsarmaturer Del 2-8: Særlige krav Håndlamper
Dansk standard DS/EN 60598-2-8 3. udgave 2013-07-05 Belysningsarmaturer Del 2-8: Særlige krav Håndlamper Luminaires Part 2-8: Particular requirements Handlamps DS/EN 60598-2-8 København DS projekt: M262696
More informationSpecifikationer for specielle typer viklingstråd Del 8: Rund kobbertråd lakisoleret med polyesterimid, klasse 180
Dansk standard DS/EN 60317-8 2. udgave 2010-06-14 Specifikationer for specielle typer viklingstråd Del 8: Rund kobbertråd lakisoleret med polyesterimid, klasse 180 Specifications for particular types of
More informationPlastrørsystemer til vandforsyning samt til dræn og afløb under tryk Polyethylen (PE) Del 4: Ventiler til vandforsyning
Dansk standard DS/EN 12201-4 3. udgave 2013-01-09 Plastrørsystemer til vandforsyning samt til dræn og afløb under tryk Polyethylen (PE) Del 4: Ventiler til vandforsyning Plastics piping systems for water
More informationKardiovaskulære implantater Endovaskulært udstyr Del 1: Endovaskulære proteser
Dansk standard DS/EN ISO 25539-1 2. udgave 2009-06-10 Kardiovaskulære implantater Endovaskulært udstyr Del 1: Endovaskulære proteser Cardiovascular implants Endovascular devices Part 1: Endovascular prostheses
More informationDansk standard DS/EN ISO
Dansk standard DS/EN ISO 11140-4 1. udgave 2007-04-24 Sterilisation af sundhedsplejeprodukter Kemiske indikatorer Del 4: Klasse 2- indikatorer til brug som alternativ til Bowie- og Dick-prøvning til påvisning
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO :2011
Dansk standard DS/EN ISO 10893-5 1. udgave 2011-05-13 Ikke-destruktiv prøvning af stålrør Del 5: Magnetpulverprøvning af sømløse og svejste ferromagnetiske stålrør til påvisning af overfladeuregelmæssigheder
More informationRenovationsvogne og deres løfteanordninger Generelle krav og sikkerhedskrav Del 3: Renovationsvogne med læsning foran
Dansk standard DS/EN 1501-3 1. udgave 2008-04-24 COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION Renovationsvogne og deres løfteanordninger Generelle krav og sikkerhedskrav Del 3: Renovationsvogne
More informationAudio- og videoudstyr samt relateret udstyr Bestemmelse af strømforbrug Del 1: Generelt
Dansk standard DS/EN 62087-1:2016 1. udgave 2016-03-02 Audio- og videoudstyr samt relateret udstyr Bestemmelse af strømforbrug Del 1: Generelt Audio, video, and related equipment Determination of power
More informationKrafttransformere Del 2: Temperaturstigning for væskefyldte transformere
Dansk standard DS/EN 60076-2 2. udgave 2011-05-13 Krafttransformere Del 2: Temperaturstigning for væskefyldte transformere Power transformers Part 2: Temperature rise for liquid-immersed transformers DS/EN
More informationTørmælk og tørmælksprodukter Bestemmelse af fedtindhold Gravimetrisk metode (Referencemetode)
Dansk standard DS/EN ISO 1736 2. udgave 2008-11-10 Tørmælk og tørmælksprodukter Bestemmelse af fedtindhold Gravimetrisk metode (Referencemetode) Dried milk and dried milk products Determination of fat
More informationKatodisk beskyttelse af havneinstallationer
Dansk standard DS/EN ISO 13174 1. udgave 2013-01-18 Katodisk beskyttelse af havneinstallationer Cathodic protection of harbour installations DS/EN ISO 13174 København DS projekt: M251559 ICS: 93.140 Første
More informationVandmålere til koldt drikkevand og varmt vand Del 2: Prøvningsmetoder
Dansk standard DS/EN ISO 4064-2 1. udgave 2014-06-19 Vandmålere til koldt drikkevand og varmt vand Del 2: Prøvningsmetoder Water meters for cold potable water and hot water Part 2: Test methods DS/EN ISO
More informationGasfyrede loftsmonterede rørstrålevarmere med enkeltbrændere, ej husholdning Del 1: Sikkerhed
Dansk standard DS/EN 416-1 3. udgave 2009-04-02 Gasfyrede loftsmonterede rørstrålevarmere med enkeltbrændere, ej husholdning Del 1: Sikkerhed Single burner gas-fired overhead radiant tube heaters for non-domestic
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO :2011
Dansk standard DS/EN ISO 13408-5 1. udgave 2011-08-16 Aseptisk behandling af sundhedsplejeprodukter Del 5: Sterilisation (SIP) Aseptic processing of health care products Part 5: Sterilization in place
More informationTermisk isolering i byggeriet Fabriksfremstillede produkter af ekspanderet perlit (EPB) Specifikation
Dansk standard DS/EN 13169:2012 +A1:2015 4. udgave 2015-03-09 Termisk isolering i byggeriet Fabriksfremstillede produkter af ekspanderet perlit (EPB) Specifikation Thermal insulation products for buildings
More informationLPG-udstyr og -tilbehør LPG-fremdrivningssystemer til både, yachter og andre fartøjer
Dansk standard DS/EN 15609 2. udgave 2012-06-19 LPG-udstyr og -tilbehør LPG-fremdrivningssystemer til både, yachter og andre fartøjer LPG equipment and accessories LPG propulsion systems for boats, yachts
More informationILNAS-EN ISO 2692:2006
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische
More informationGeotekniske in-situ-forsøg Del 1: Undersøgelser med CPT/CPTU
Dansk standard DS/EN ISO 22476-1 1. udgave 2012-11-23 Geotekniske in-situ-forsøg Del 1: Undersøgelser med CPT/CPTU Geotechnical investigation and testing Field testing Part 1: Electrical cone and piezocone
More informationElektrisk rumopvarmning, gulvvarme, karakteristika for ydeevne Definitioner, prøvningsmetoder, dimensionering og formelsymboler
Dansk standard DS/EN 50559 1. udgave 2013-06-11 Elektrisk rumopvarmning, gulvvarme, karakteristika for ydeevne Definitioner, prøvningsmetoder, dimensionering og formelsymboler Electric room heating, underfloor
More informationFaste isoleringsmaterialers dielektriske og resistive egenskaber Del 1: Generelt
Dansk standard DS/EN 62631-1 1. udgave 2011-07-07 Faste isoleringsmaterialers dielektriske og resistive egenskaber Del 1: Generelt Dielectric and resistive properties of solid insulating materials Part
More informationOlieindustri, petrokemisk industri og naturgasindustri Fleksible sammenkoblinger til mekanisk kraftoverføring Generelle anvendelsesformål
Dansk standard DS/EN ISO 14691 + cd-rom 2. udgave 2009-02-04 Olieindustri, petrokemisk industri og naturgasindustri Fleksible sammenkoblinger til mekanisk kraftoverføring Generelle anvendelsesformål Petroleum,
More informationSamfundsmæssig sikkerhed Videoovervågning Eksportinteroperabilitet
Dansk standard DS/EN ISO 22311 1. udgave 2014-11-10 Samfundsmæssig sikkerhed Videoovervågning Eksportinteroperabilitet Societal security Video-surveillance Export interoperability DS/EN ISO 22311 København
More informationOvervågnings- og alarmcentraler Del 1: Krav til placering og konstruktion
Dansk standard DS/EN 50518-1 2. udgave 2013-12-06 Overvågnings- og alarmcentraler Del 1: Krav til placering og konstruktion Monitoring and alarm receiving centre Part 1: Location and construction requirements
More informationMetode til bestemmelse af krævede afstande mellem kondensatorer og modstande med ensrettede afslutninger
Dansk standard DS/EN 60717 1. udgave 2012-09-17 Metode til bestemmelse af krævede afstande mellem kondensatorer og modstande med ensrettede afslutninger Method for the determination of the space required
More informationMetode til prøvetagning af isolerende væsker
Dansk standard DS/EN 60475 1. udgave 2012-02-03 Metode til prøvetagning af isolerende væsker Method of sampling insulating liquids DS/EN 60475 København DS projekt: M250438 ICS: 29.040.01 Første del af
More informationSterile injektionssprøjter til engangsbrug Del 4: Sprøjter med anordning, der forhindrer genbrug
Dansk standard DS/EN ISO 7886-4 2. udgave 2009-10-22 Sterile injektionssprøjter til engangsbrug Del 4: Sprøjter med anordning, der forhindrer genbrug Sterile hypodermic syringes for single use Part 4:
More informationElproducerende vindmøller Del 22: Overensstemmelsesprøvning og certificering
Dansk standard DS/EN 61400-22 1. udgave 2011-02-18 Elproducerende vindmøller Del 22: Overensstemmelsesprøvning og certificering Wind turbines Part 22: Conformity testing and certification DS/EN 61400-22
More informationByggevarer Vurdering af afgivelse af farlige stoffer Del 1: Vejledning i fastlæggelse af udvaskningsprøvninger og supplerende prøvningstrin
DS-information DS/CEN/TS 16637-1 1. udgave 2014-09-18 Byggevarer Vurdering af afgivelse af farlige stoffer Del 1: Vejledning i fastlæggelse af udvaskningsprøvninger og supplerende prøvningstrin Construction
More informationMaskinsikkerhed Beskyttelsesskærme Generelle krav til konstruktion og fremstilling af faste og bevægelige beskyttelsesskærme
Dansk standard DS/EN ISO 14120:2015 1. udgave 2015-12-11 Maskinsikkerhed Beskyttelsesskærme Generelle krav til konstruktion og fremstilling af faste og bevægelige beskyttelsesskærme Safety of machinery
More informationEN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)
ÖNORM EN ISO 14731 Edition: 2007-03-01 Welding coordination Tasks and responsibilities (ISO 14731:2006) Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) Coordination en soudage Tâches et responsabilités
More informationKoaksiale kommunikationskabler Del 11: Gruppespecifikation for halvstive kabler med polyethylendielektrikum (PE)
Dansk standard DS/IEC 61196-11:2016 1. udgave 2016-01-13 Koaksiale kommunikationskabler Del 11: Gruppespecifikation for halvstive kabler med polyethylendielektrikum (PE) Coaxial communication cables Part
More informationILNAS-EN ISO :2005
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005) Matériaux métalliques - Essai de dureté Vickers - Partie 1: Méthode d'essai (ISO 6507-1:2005) Metallische Werkstoffe -
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 17657-4:2007 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system Resistance welding - Welding current measurement for resistance
More informationEurocode 3 Stålkonstruktioner Del 3-1: Tårne, master og skorstene Tårne og master
Dansk standard DS/EN 1993-3-1 1. udgave 2007-01-08 Eurocode 3 Stålkonstruktioner Del 3-1: Tårne, master og skorstene Tårne og master Eurocode 3 Design of steel structures Part 3-1: Towers, masts and chimneys
More informationElektriske installationer i skibe Del 353: Kabler til nominelle spændinger på 1 kv og 3 kv
Dansk standard DS/IEC 60092-353 1. udgave 2011-10-07 Elektriske installationer i skibe Del 353: Kabler til nominelle spændinger på 1 kv og 3 kv Electrical installations in ships Part 353: Power cables
More informationTextiler Kemisk rensning af textilvarer og personbeklædning Del 1: Bedømmelse af ydeevne efter rensning og færdigbehandling
Dansk standard DS/EN ISO 3175-1 2. udgave 2010-03-25 Textiler Kemisk rensning af textilvarer og personbeklædning Del 1: Bedømmelse af ydeevne efter rensning og færdigbehandling Textiles Professional care,
More informationKlassifikation af miljøbetingelser Del 2-1: Miljøbetingelser i naturen Temperatur og fugtighed
Dansk standard DS/EN 60721-2-1 1. udgave 2014-07-07 Klassifikation af miljøbetingelser Del 2-1: Miljøbetingelser i naturen Temperatur og fugtighed Classification of environmental conditions Part 2-1: Environmental
More informationBiologisk vurdering af medicinsk udstyr Del 7: Restgasser fra ethylenoxidsterilisation
Dansk standard DS/EN ISO 10993-7 2. udgave 2008-12-15 Biologisk vurdering af medicinsk udstyr Del 7: Restgasser fra ethylenoxidsterilisation Biological evaluation of medical devices Part 7: Ethylene oxide
More information