PANIC EXIT HARDWARE DX-500 Serie

Transcription

1 PANIC EXIT HARDWARE DX-500 Serie

2 Explanation of European standards The standards EN 1125 and EN 179 were created at the European level with the acceptance and cooperation of the Dutch standards committee. The central objective is to give a safe and eective escape route through a doorway. These standards state that doors equipped with panic or emergency exit devices must be able to be opened with a single action. The standards also determine the requirements for panic devices in conjunction with push and pull tests, corrosion resistance and durability tests. Panic exit: standard EN 1125 This standard describes the minimum requirements with regard to escape route doors in public buildings. Typical applications include: bars, libraries, theatres, shops, schools, hospitals cinemas, etc. Main requirements: The escape route door must be fitted with a horizontal crossbar or touchbar that covers at least 60% of the door s width. The required opening pressure may not be higher than 8 kg. The weight of the door may not exceed 200 kg. The height of the door may not exceed 2500 mm. The width of the door may not exceed 1300 mm. IMPORTANT The crossbar must never project past the edge of the door. This forms an obstacle for people trying to escape or trying to help, as clothing or fire equipment may become snagged on them. Emergency exit: standard EN 179 This standard describes the minimum requirements for emergency doors in buildings with limited access. This can include apartment buildings, oices, storage spaces or boiler rooms. Panic devices according to this standard are not suitable for application in areas that are freely accessible to the public. These devices are intended only for areas where people already have prior knowledge of its operation and know the escape route. Main requirements: The door may be fitted with a lever handle or a push pad The required opening pressure may not be higher than 8 kg. The weight of the door may not exceed 200 kg. The height of the door may not exceed 2500 mm. The width of the door may not exceed 1300 mm. IMPORTANT When in doubt we recommend that you contact us. It is best to always choose a solution that is in conformity with the standard EN You will then be opting for the safe option with respect to your advisory function. In this context, also be aware of product liability and do not hesitate to give a clear advice to your customer.

3 CE marking: This product complies with legal regulations With a CE certification the producer shows that the product meets the requirements for safety, health, the environment and consumer protection. These requirements complement valid EU guidelines. Test certificates Test certificates must be available for inspection at all times. They are a part of an on-going monitoring process and may never be older than 12 months. Approved tests Products are regularly tested at a UKAS- approved company, like Warrington APT Laboratories Ltd. in the UK. The DX panic exit hardware is also tested here. ISO 9000 DX panic devices are manufactured by an ISO 9000-certified organisation. 3 (3) 7 (6/7) 6 (5-7) 0 (0/A/B) 1 (1) 3 (3/4) Category of use 3 = high frequency of use by public and others with little incentive to exercise care. Durability 6 = cycles 7 = cycles Door size/mass 5 = doors up to 100 kg 6 = doors up to 200 kg 7 = doors over 200 kg Fire Resistance (EN 1634) 0 = not approved for fire/smoke door use A = approved for smoke door assemblies B = approved for use on fire & smoke door assemblies Safety 1 = All panic and emergency devices have a critical safety function therefore only grade 1 is identified Corrosion Resistance (EN 1670) 3 = high 4 = very high 2 (2-5) 2 (1/2) Security - EN 1125 : 2 = 1000N - EN 179 : 2 = 1000N 3 = 2000N 4 = 3000N 5 = 5000N Distance from the bar or pad to the door face 1 = up to max. 150mm 2 = up to max. 100mm A (A/B) Type of operation - EN 1125 : A = puch bar B = touch bar - EN 179 : B = push pad A (A-C) Field of Door Application (outwards) A = Single/Double door - active of inactive leaf B = Single door only C = Double door only - inactive leaf only

4 Het DX 500 Slimline anti-paniekbeslag Design Sleek Aesthetic Contemporary Colour Matte black panic locking device with red push bar or push pad Characteristics Safe Sturdy User-friendly Simple assembly Product features Pullman latches Casing width 38 mm wide Multiple locking points: upper, lower and side Operable on both the left and right side Suitable for single and double door situations Certification CE-certified In compliance with European standards EN 1125:2008 and EN 179:2008 Warranty 5-year manufacturer s warranty Additional Assembly and mounting instructions Competitive prices Available from stock

5 Panic exit hardware for escape doors In situations where there is no prior knowledge of the operation and location of the panic devices or when there is free public access to a building, panic devices should be placed in accordance with EN DX PO 501 EB Single point locking with push bar Horizontal rim latch. DX PO 501P EB Single point locking with push pad Horizontal rim latch. DX PO 512 EB Two point locking with push bar. Vertical latches. DX PO 512P EB Two point locking with push pad. Vertical latches. DX PO 513 EB Three point locking with push bar. Horizontal and vertical latches. DX PO 513P EB Three point locking with push pad. Horizontal and vertical latches.

6 General Suitable for single and double doors. Can be used on the left and right (easily reversed). For doors up to mm tall and mm wide. Casing width 38 mm wide. Pullman latch 32 mm wide. Minimum jamb width 55 mm. Sockets and fixing materials included. Optional features Extended vertical rod for a door height up to mm. Alarmswitch. Permanent unlocking possible. Alternative sockets and strikes. Various RAL colours available. DX PO 522 EB Two point locking with push bar. Horizontal latches. DX PO 522P EB Two point locking with push pad. Horizontal latches. DX PO 523 EB Three point locking with push bar. Horizontal latches. DX PO 523P EB Three point locking with push pad. Horizontal latches.

7 Panic hardware for emergency doors Panic devices operated by a push pad may never be used in areas that are freely accessible to the public. These devices are intended only for users who have knowledge of its operation and the location of the escape route. The panic devices on this page all comply with EN 179:2008. The model and application guides for panic hardware operated by a push pad are identical to that of the type with a push bar.

8 Application guide for Slimline panic exit hardware APPLICATION 1 APPLICATION 2 APPLICATION 3 APPLICATION 4 APPLICATION 5 PO 501 PO 512 PO 513 PO 522 PO 523 APPLICATION 6 APPLICATION 7 PO 512 PO 501 PO 512 PO 522 * PO SK 144 (1x) * PO SP 406 (2x) REBATED MEETING STILES REBATED MEETING STILES APPLICATION GUIDE DX-500 panic devices are suitable for use on single and double doors. The situations illustrated here show the application of devices with a push bar. The application guide for push pad-operated devices is the same. For double doors, the right-hand door is the door that opens first. * The sockets and strikes required for these situations are not included as standard. APPLICATION 8 APPLICATION 9 PO 512 PO 523 PO 512 PO 512 * PO SK 144 (1x) * PO SP 406 (2x) REBATED MEETING STILES PLAIN MEETING STILES

9 A great variety of finishes Silver Black White Powder coating The panic exit hardware and accessories have been powder coated with epoxy. They are available from stock in the colour combination red/black or on order in various RAL colours and combinations. Powder coating is impact and wear-resistant, eco-friendly and has a long lifespan. The powder coated items have all undergone a 96-hour salt spray test in accordance with standard CEN. White 9010 Dark blue 5002 Ruby red 3003 Yellow 1023 Grey 7038 Mint green 6029 Ivory cream 1014 Black 9005 Almond brown 8011 Turquoise 6016 Burgundy 3007 Steel blue 5011 Moss green 6005 Anthracite 7016 Beige 1001