Technical Application Guide for PHILIPS LED Lamps

Size: px

Start display at page:

Download "Technical Application Guide for PHILIPS LED Lamps"

Hugh Hines
5 years ago
Views:

1 Technical Application Guide for PHILIPS LED Lamps 12V PHILIPS EnduraLED 1W MR16 Dimmable

Introduction PHILIPS dimmable integrates a leading high power LED light source and a compact high efficiency driver into a traditional halogen form-factor.

2 Introduction PHILIPS dimmable integrates a leading high power LED light source and a compact high efficiency driver into a traditional halogen form-factor. Not only does it employ a hi-tech IC solution to ensure dimming system control, it also delivers a light intensity and quality which meet the Energy Star standard for MR16 lamps. The form-factor of the PHILIPS 12V EnduraLED 1W MR16 Dimmable guarantees a 1% form-fit on the back-side of the lamp. dimmable is ideal for a myriad of applications including track lighting, general architectural and landscape lighting, plus industrial OEM equipment lighting. Design Highlights Up to 8% energy saving compared to standard halogen and incandescent spot lamps Long lifetime of 25, hours (B5, L7) at Tc=77 C Retrofits into vast majority of MR16 fixtures Dimmable when using leading edge dimmers 15 & 24 & 36 degrees beam angle for a clearly defined beam spread Emits virtually no heat and will not fade colors CCT: 27K, 3K, 4K Discharges virtually no UV/IR light in the beam Environmental friendly, without Mercury or any other hazardous substances RoHS compliant Application Areas PHILIPS dimmable lamp is suitably designed for spot and general lighting applications in hospitality and retail industries. Unlike the conventional halogen reflector lamp, PHILIPS 12V EnduraLED 1W MR16 dimmable lamp, 1W power consumption per lamp, has a long lifetime of 25, hours (or equivalent to 3 years if lit continuously for 24hrs a day) ensuring minimum maintenance cost in hotels, restaurants, cafes and shops, especially suitable for various applications in the public areas such as: Corridors / Stairway / Washroom Lobby / Reception areas Application Notes Fulfill Energy Star noise requirement of 25dB Max Operating open air ambient temperature range for rated life is -2 C to 41 C Tc max = 77 C for rated life. (See Lifetime + Sustainability Curves) Storage temperature range is between -4 C and 65 C, humidity range is between 1% and 9% Dimmable with most of leading edge dimmers in the market (refer to the recommended dimmer list on the last page) Not intended for use with emergency light fixtures or exit lights For use in fixtures that can structurally support a lamp weighing.99 pound

Product Design Technical Specifications Product type Volts Nom. Equ. Base Power Approx. Beam Color Approx. Rated CRI Dimmable Watts Watts Factor Lumens Angle Temp. MBCP Avg.

3 Product Design Technical Specifications Product type Volts Nom. Equ. Base Power Approx. Beam Color Approx. Rated CRI Dimmable Watts Watts Factor Lumens Angle Temp. MBCP Avg.Life (Kelvin) (hrs) 15D 27K dimmable 15D 3K dimmable 24D 27K dimmable 24D 3K dimmable 24D 4K dimmable 36D 27K dimmable 36D 3K dimmable 36D 4K dimmable GU D 27K , 8 Yes GU D 3K , 8 Yes GU D 27K , 8 Yes GU D 3K , 8 Yes GU D 4K 26 25, 8 Yes GU D 27K 12 25, 8 Yes GU D 3K 19 25, 8 Yes GU D 4K 12 25, 8 Yes Fixture Compatibility D Type C D max. max. max. max. Overall length Diameter Weight Weight (In.) (In.) (Pound) (Gram) 12V EnduraLED 1W dimmable C Spectral Power Distribution Ilntensity (mw/nm) Spectrum of dimmable 27K Wavelength(nm) Ilntensity (mw/nm) Spectrum of dimmable 3K Wavelength(nm) Ilntensity (mw/nm) Spectrum of dimmable 4K Wavelength(nm)

4 Photometric Diagrams Dimmable 1W MR16 1x4 X LEDs / 27K 15D Collimator 1 x 45 lm Dimmable 1W MR16 1x4 X LEDs / 3K 15D Collimator 1 x 435 lm Dimmable 1W MR16 1x4 X LEDs / 27K 24D Collimator 1 x 445 lm Dimmable 1W MR16 1x4 X LEDs / 3K 24D Collimator 1 x 475 lm Dimmable 1W MR16 1x4 X LEDs / 4K 24D Collimator 1 x 44 lm Dimmable 1W MR16 1x4 X LEDs / 27K 36D Collimator 1 x 42 lm Dimmable 1W MR16 1x4 X LEDs / 3K 36D Collimator 1 x 445 lm Dimmable 1W MR16 1x4 X LEDs / 4K 36D Collimator 1 x 41 lm

Lifetime + Sustainability 6% Failure Rate Curve of 12V MR16 1W 7 12V MR16 1W Lifetime Vs Tc Total Failure Rate 5% 4% 3% 2% 1% Tc =87 O C Tc =77 O C Tc =67 O C Lifetime (hours) 6 5 4 3 2 1 B1L7 B5L7 %

5 Lifetime + Sustainability 6% Failure Rate Curve of 12V MR16 1W 7 12V MR16 1W Lifetime Vs Tc Total Failure Rate 5% 4% 3% 2% 1% Tc =87 O C Tc =77 O C Tc =67 O C Lifetime (hours) B1L7 B5L7 % Lifetime (hours) Tc ( o C) PHILIPS dimmable lamp has a lifetime of 25, hours, defined as the number of hours when 5% of a large group of identical lamps below 7% of its initial lumens. Lifetime estimation based on the application environment condition: please refer to the Tc for lifetime forecast. Temperature PHILIPS dimmable is designed for operation in all MR16 lighting installations in open fixtures. Maximum case temperature for normal light output behavior (reduced lifetime): Tc max = 81 C; Maximum case temperature for rated 25, hr lifetime: 77 C. T-ambient here represents the temperature operating in free air. T is the difference between the temperature of the aluminum heatsink (Tc) and the temperature of the air in the test room (T-ambient) when the lamp is operated in free air condition. 1% Flux (%) 99% 98% 97% Tc. 96% 95% T_ ambient (o C) T_Case (o C) T=36 o C T c Max: 81 o C Polar Diagram Comparison o -3 o 3 o Halogen 5W MR16 36D 15D 27K dimm 15D 3K dimm 24D 27K dimm 24D 3K dimm 24D 4K dimm 36D 27K dimm 36D 3K dimm 36D 4K dimm -6 o -9 o o 9 o -12 o 12 o -15 o 15 o 18 o

Lighting Facts Label Packaging Warnings and Cautions Suitable for use in open luminaires (fixtures). Caution - Risk of Electric Shock - Do Not Use Where Directly Exposed To Water.

6 Lighting Facts Label Packaging Warnings and Cautions Suitable for use in open luminaires (fixtures). Caution - Risk of Electric Shock - Do Not Use Where Directly Exposed To Water. This device is not intended for use with emergency exit fixtures or emergency lights. NOT FOR USE WHERE EXPOSED TO THE WEATHER. Turn off power before changing lamp. Notes: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-3. Recommended Dimmer & Transformer List No flicker or flicker below 1% dim-level Flixker between 1%-5% dim level Can t start up or flicker at high position Region Manufacturer Country Type Trailing/ Hatch US RS-12-6M and Trailing NAM Lightech US LET 6 Dimmable Philips US 71A9743 Region Manufacturer Country Type Load Trailing/ 1 lamp 1 lamp 1 lamp NAM Lutron Lutron Lutron Leviton Leviton SLV-6P-WH NTLV-6P-WH TGLV-6PR-WH VPM %-1% 2%-1% 11%-1% 1%-1% 3%-1% Leviton 6615 RC Trailing 45%-1% 36%-1% NAM leading edge dimmers are specified to only match EM transformers Has wide dimming range with edge dimmers. 21 Koninklijke Philips Electronics All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. 8/21

Technical application guide

Technical application guide PHILIPS dimmable PAR38 1200 lumen series Retail Optic LED Lamps with AirFlux Technology PHILIPS LED Retail Optic PAR38 Lamps with AirFlux Technology enhances the shopping experience