Smoke and Fire Curtains

Transcription

1 Smoke and Fire Curtains NFPA UL Datasheet firecurtaintech.com

2 SMOKE AND FIRE CURTAINS Fire Curtain Technologies distributes a wide range of fire and smoke protective curtains to protect every type of building application. Fire and smoke protective curtains provide means of escape and boundary protection to providing a building with a system that offers effective fire and smoke compartmentalization. Our fire and smoke protective curtains offer various solutions to architects, engineers, consultants and specifiers providing the ability to design complex buildings that adhere to fire regulations and offer protection against smoke FIRE CURTAINS Product Name Housing type Max width Max drop Certification Compliance Automatic Fire Protective Curtain Single unit 19.5 Multi unit 19.5 Automatic Fire Protective Smoke Curtain Multi unit hours UL 10D, UL 1784 Automatic Fire Curtain FireMaster FM Dimensions ( ft ) Single unit / 18 Multi unit 16 / 12 / hours 1-3 hours UL 10D, UL EN , EN EN , EN SMOKE CURTAINS Dimensions ( ft ) Product Name Housing type Max width Max drop Certification Compliance Automatic Fire Protective Smoke Curtain Multi unit hours UL 10D, UL 1784 Automatic Smoke Sealed Curtain SD Automatic Smoke Curtain SM5 SI-N Single unit SI-L Single unit / 18 Single unit Multi unit 1-3 hours 1-3 hours UL 10D, UL 1784, EN EN , EN EN Fixed Draft Curtain SM - ST hours EN , EN

3 BENEFITS AND FEATURES BENEFITS SMOKE CURTAINS Increase the time available for occupants to escape the building since they reduce the travel distances. Are a cost effective solution to zoning a building. Assist the emergency services by containing or channelling the smoke into predetermined areas. Limit travel and overcooling of smoke, reducing the risk of cold smoke dropping to low level and obscuring vision. FIRE CURTAINS Seal off an area to contain a fire and to prevent it from spreading. Automatically deploy upon receipt of a signal from the fire-alarm panel, and automatically retracts when the signal has stopped. Retain fire integrity in an emergency but allow complete freedom of passage when not in use. FEATURES Fire Curtain Technologies smoke and fire curtains are fully tested and certified to the latest fire regulations and building design technology. Fire Curtain Technologies provides a wide range of options: All system components (headboxes, fabric, bottom bars, drive systems) can be customized. All fire and smoke curtains can operate as an integrated part of a smoke control and fire management scheme, with emergency power units and the facility to interface directly with a fire control panel. Gravity Fail-safe Unwinds curtain to its operational position without the need for power. Fire curtains are manufactured under the ISO 9001 quality standard by Colt Group International. 1 1 There are four main components: 1 Head box 2 Roller with fabric 3 Side guides 4 Bottom bar with seal

4 UNIVERSAL FEATURES HEAD BOX 6 12 Housing type SI / DH / DV The head box is made from galvanized steel and comprises stiffening brackets and a movable cover plate. Head boxes are also pre-assembled so to easily accommodate a roller or rollers. The bottom access covers are attached by means of screws on the side of the housing SI DH DV Single Double horizontal Double vertical Depending on the unit height and temperature classes (60 or 180), the housing type is either type N or type L Cloth SI-x Single headbox Headbox dimensions (m DH-x Double horizontal headbox Configuration and sizes: DV-x Double vertical headbox Housing dimensions (ft) Single (type SI) Where a limited size of barrier is required (e.g. a fire door or shutter) Width [B] Height [H] SI-N / SD-N 6 6 SI-L / SD-L 7 7 1/4 Double vertical (type DV) Where continuous runs with overlapped fabric to form a continuous barrier are required. Width [B] Height [H] DV-N 6 10 DV-L 7 12 Double horizontal (type DH) Where continuous runs with overlapped fabric to form a continuous barrier are required and where there is a premium on space under the ceiling. Width [B] Height [H] DH-N 10 6 DH-L /4 ROLLER MOTOR Technical information The roller is a essential component of the fire protective curtain and provides, in connection with the controls, a safe function of the fire protective curtain. Direct current motor DC motor with planetary reduction gears G type roller unit Gravity fail safe H type roller unit Gravity fail safe with intermediate stops

5 UNIVERSAL FEATURES CLOTH The fabric is fire-resistant and comprises one of the following options: 60 minute Heat-stabilized fabric achieving 60 minutes fire integrity. 120 minute Heat-stabilized fabric with a stainless steel inlay achieving 120 minutes fire integrity and 30 minutes limitation of the radiation of heat. 180 minute Heat-stabilized fabric with a stainless steel inlay, achieving 180 minutes fire integrity and 30 minutes limitation of the radiation of heat. 60 minute material 120 and E180 minute material OVERLAPS SI with no overlap Overlap for DH type curtains Overlap for DV type curtains CORNERS Type SI Type DH Type DV

6 UNIVERSAL FEATURES BOTTOM BAR Consists of a contoured profile made of galvanized steel sheet. It is attached to the lower end of the cloth using rivets and serves: Cloth 2 K bottom bar 3 Additional weight 4 Spring 5 Cover strip 1 As a weight to draw the curtain down to its working position To ensure that the curtain remains taut when it is deployed To ensure there is a seal against the floor. K bottom bar profile UK Designed for commercial applications, comprising steel angle with an additional aluminium profile connected to a spring in order to accommodate any unevenness in the floor in order to minimize smoke leakage Cloth 2 U bottom bar 3 Additional weights 4 Round steel Ø10 mm 5 Spring 6 Cover strip 1 UK bottom bar profile SIDE GUIDE A side guide system is nearly always fitted and provides a seal between the sides of the curtain fabric and the walls, ensuring that any positive or negative pressures created by a fire will be resisted by the curtain and so that it won t deflect significantly. Side guides can be integrated either into or onto a wall / soffit or into a recess / niche. COLT side guide roller system has been designed to ensure that the curtain will move to its closed position easily even when there are significant air velocities around the curtain. Side guide assembly options min.= 1/32 in max. = 1/2 in min. =1/32 in max. = 1/2 in min. 3 in Onto soffit Onto wall Into niche

7 FIRE PROTECTIVE CURTAIN AUTOMATIC FIRE CURTAIN The Fire Protective Curtain is an automatic fire curtain that prevents fire and smoke from transferring from one part of a building to another. In the event of a fire, the Fire Protective Curtain forms a temporary barrier which assists people escaping from a burning building. It operates automatically when interfaced with the building fire alarm system. APPLICATIONS: Fire protective curtains are used in all industrial and commercial buildings, e.g. shopping centers, office buildings, atria, etc. The Fire Protective Curtain is certified and labeled to UL 10D Fire resistance 60 / 180 minutes The fire protective curtain consists of a roller covered with a fiberglass fabric which is incorporated into a galvanized steel housing. The roller unit incorporates a motor, planetary gearbox and internal microprocessor. The microprocessor monitors the rest position and independently regulates the closing speed to a maximum of 0,15m/s (6 in / sec). The housing is equipped with specially developed reinforced brackets, which maintains integrity at high temperatures. The bottom of the housing is closed off with a panel which allows the entire length of the system to be accessed. The system is equipped with side guides. The design ensures that the required compartmentalization is achieved. There are no visible fasteners either on the underside of the housing or on the front of the side guides. At the bottom of the curtain a bottom bar is attached which serves to ensure that the curtain operates as designed and also that it remains stable when unrolled. Furnace testing in accordance with UL 10D, EN Smoke tightness tests Materials class: A2-s1, d0 Quality of cloth 1800 F Glass fabric 2200 F Glass fabric with coating and stainless-steel inlay Virtually invisible The bottom bar makes contact with the floor when the curtain is deployed creating a smoketight seal with the floor. There are different bottom bars available for different applications. The curtain headbox and side guides can be polyester powder coated in all RAL colors. The fabric is silver grey. The unit can be configured with mounting brackets either for wall or ceiling mounting. FS, FR and FD PIN SIDE GUIDES with integrated seals Manufactured in accordance with ISO 9001:2008

8 SMOKE SEALED CURTAIN FIRE PROTECTIVE CURTAIN SMOKE CERTIFIED The SD Smoke Sealed Curtain is designed to restrict the passage of smoke from spreading It operates automatically when connected. APPLICATIONS: Smoke sealed curtains are used in all industrial and commercial buildings, e.g. shopping centers, office buildings, lift landing lobbies, hospitals, retirement home, atria, etc. The Smoke Sealed Curtain is certified and labeled to UL 10D and EN and further certified to UL 1784 Fire resistance + compartmentation 60 / 180 minutes Furnace testing in accordance with UL 10D, EN Smoke tightness test UL 1784 Materials class: A2-s1, d0 Quality of cloth 1800 F Glass fabric 2200 F Glass fabric with coating and stainless-steel inlay Virtually invisible FS, FR and FD PIN SIDE GUIDES with integrated seals Manufactured in accordance with ISO 9001:2008 The Smoke Sealed Curtain consists of a roller covered with a fiberglass fabric which is incorporated into a galvanized steel housing. The roller unit incorporates a motor, planetary gearbox and controls electronics with a microprocessor. The microprocessor monitors the rest position when rolled up and independently regulates the closing speed to a maximum of 0,15 m/s (6in / sec). The housing is equipped with specially developed reinforced brackets, which maintains integrity at high temperatures. The bottom of the housing is closed off with a panel which allows the entire length of the system to be accessed. The system is equipped with FD side guides. Their special tight design ensures that the required compartmentalization is achieved. There are no visible fasteners either on the underside of the housing or on the front of the side guides. At the bottom of the curtain a bottom bar is attached which serves to ensure that the curtain operates as designed and also that it remains stable when unrolled. The bottom bar makes contact with the floor when the curtain is deployed, creating a smoketight seal with the building structure. There are different bottom bars available for different applications. The curtain headbox and side guides can be polyester powder coated in all RAL colors. The fabric is silver grey. The unit can be configured with mounting brackets either for wall or ceiling mounting. *Also available with Emergency Egress.

9 FIXED SMOKE CURTAIN FIXED DRAFT CURTAIN A Fixed Draft Smoke Curtain contains smoke and heat in the case of fire. Per NFPA 92B, Draft curtains are generally used to channel or contain smoke that is attached to the underside of the ceiling and protrude a limited distance downward. A fixed smoke curtain consists of several overlapping curtains attached together to provide a continuous run. They are connected together and to the building by means of clamps and angle pieces. The bottom of the cloth is weighted, ensuring that the curtain remains taut and reducing the amount of deflection through air currents. Smoke resistance 60 / 120 minutes >2500mm Height from 500mm to max. 0.6 fixing anchor W-FA, type /100/2.0 angle 5/10 rivet 10/30/10/1.5 clamp profile Duo adhesive tape Coupling piece Smoke curtain cloth Galvanised steel bar 26.9mm dia (3/4 ) Coupling piece Floor level The installation angles and the clamping profiles are predrilled to accept rivets. The connecting pieces have a continuous predrilled hole pattern, enabling fast and easy assembly of the curtain fabric. The bottom bar has a loop to accommodate the weight. SM-ST system can be used to close off a scheme of movable smoke curtains position below it, by clamping directly onto the housing of the movable smoke curtain. Fixing brackets, clamping profiles and bottom bars are all in galvanized steel. The curtain overlaps can be attached to one another using a spray adhesive approved by MPA Stuttgart, which seals the flaps tightly to to enhance the appearance of the surface of the curtain. The SM-ST system is fixed to the building with approved fasteners at intervals of a maximum of 5 feet. Smoke curtain meets the requirements of EN Smoke tightness tests Materials class: A2-s1, d0 Quality of cloth 1800 F Glass fabric 2200 F Glass fabric with coating and stainless-steel inlay Manufactured in accordance with ISO 9001:2008

10 CONTROL PANEL CONTROL PANEL The control panel for automatic smoke and fire curtains operates as sub system to central Fire Alarm System (FAS) or can operate independently. Electrical Requirements (120VAC, 0.67Amps/ motor) NUMBER OF CONTROL GROUPS MODULE FOR ADDITIONAL FUNCTIONS SIGNALLING MODULE NUMBER OF CONTROL GROUPS MODULE FOR ADDITIONAL FUNCTIONS SIGNALING MODULE Optional Uninterruptable Power Supply Control panels can receive multiple alarm and manual/emergency control inputs to manage multiple zones with immediate full deployment, delayed full deployment, and immediate partial deployment with delayed full deployment. Systems can be fitted to be modified on-site or remotely by certified technicians. Additional functions include: Release via smoke detector / heat detector Release via button / hand control Re-opening of curtain for use by fire-fighters (fire access) Re-opening of curtain in emergency (fire egress) Monitoring of curtain via a safety bottom bar Line monitoring for wire-break and short circuit. Signaling outputs include: The module operates in conjunction with the auxiliary module and is prepared for connection of optional warning devices, e.g. a combined multi-tone siren and/or a strobe light.

11 EMERGENCY EGRESS Rest position (Curtain up) The function of the intermediate position is programmed into the control panel at the factory, onsite, or remotely by a certified technician. Drop 1 Hold Time Distance from floor to ntermediate position. Curtain remains in the HWD intermediate position before it continues down (Escape Delay). Hold time HWD LT-UP Item Code: Emergency switch to raise smoke or fire curtains following a fire alarm by any person. Flush mounting. With hook and screw fixing Including RU-E frame Stickers supplied separately Installed at a height of ft from FFL DOOR / GATE EMERGENCY EXIT GA-E housing To accommodate a WF / WN switch Flush mounting. Cream colour Drop 1 UPS Connected to the connection module. Sustains normal curtain operation to FAS for locally-required period of time. * Device may vary depending on system requirements FFL Working Position (curtain down)

12 RELEASE AND CONTROL COMPONENTS SMOKE AND HEAT SENSORS SMOKE SENSOR Photoelectric detection of smoke particles In accordance with EN 54-7 Optical smoke detector with alarm: clear LED, red when there is an alarm Operating voltage VDC Current consumption at rest approx 40μA/24V Operating range from -4 F to F, 10-95% RH Dimensions including base: H 2 in, Ø 4 in VDS no. G THERMO-DIFFERENTIAL DETECTOR Alarm indication by red LED Easy installation with quarter-turn fastener Protection against theft Insensible to wind and atmospheric pressure Nominal temperature 135 F Response class A1R to EN 54-5: Application temperature F Static reaction: F Voltage: V- Operating range from -4 F to 195 F, 10-95% RH 100Mm diameter, flat design with base only 2 3/8 in height (standard / relay base) VDS approval no. G STANDARD BASE With short spring to facilitate installation and maintenance. Designed to combat incorrect operation Surface or flush cable entry Dimensions: H 5/8 in, Ø 4 in CONTROL SWITCH DOOR / GATE EMERGENCY EXIT MANUAL CONTROL Button as the main alarm point with internal button to reset the alarm 0.03 in thin break glass to DIN 1249 Lockable case Dimensions: 5 in x 5 in x 1in (WxHxD) IP42 IP code Label Close fire curtain KEY SWITCH Key switch for rolling up of smoke or fire curtains following a fire alarm by an authorized person. Flush mounting. Prepared to accommodate a PHZ cylinder lock (in addition). Switching capacity 10A / 250V AC. With hook and screw fixing Including RU-E frame Stickers supplied separately EMERGENCY SWITCH Emergency switch to raise smoke or fire curtains following a fire alarm by any person. Flush mounting. With hook and screw fixing Including RU-E frame Stickers supplied separately Installed at a height of 35 in - 43 in from FFL

13 SIGNALS AND MONITORING SIGNALS Sounder with strobe light Sounder with Xenon strobe light, white plastic housing depending on different wiring even only as strobe light or sounder usable. Voltage : 24V DC Current: 40 ma Protection class: IP 45 Alarm volume level: Adjustable 10 to 109 dba Dimensions: Ø 4 in x4 in H Coloured dome: Orange Operating temperature: 5 F to 104 F Multi-tone siren Multi-tone siren with integrated strobe light in red plastic housing Knock-outs for cable Voltage : Current: Protection class: Dimensions: Coloured dome: 9-28V DC 20 ma IP55 Ø 4 in x 3 in H red Voice announcer Multi-tone siren with integrated strobe light in white plastic housing and orange LED. When activated, makes this announcement between the tones Voltage : 20-28V DC Sound output: 100 db (A) Language: 95 db (A) Current: 60 ma Protection class: IP45 Alarm volume level: 3 x 3 x 5 in (WxHxD) Dimensions: Ø 4 in x 4 in H Operating temperature: -13 F to 158 F KL Contact Safety MONITORING Provides protection either for people or for goods. One side has double-sided tape for direct attachment to the bottom bar. The homogeneous, highly insulating material made of PVC is equipped with two internal conductive contact surfaces. In the conductive elastomer there are two copper wires that enable low resistance readings at great lengths. Sectional dimensions: 1/4 in x 1 in Length: 4 in x 2 in Fixing the unit: Double-sided tape Response force: min. 4 N Contact travel: < 1/8 in Detection angle: < 122 F RL Optical Safety Red LED function display Consisting of optic sensor for object detection and monitoring of openings A 24 V to 240 V all-voltage sensor can be operated with either DC or AC voltage. High protection suitable for use in harsh environments. Including reflector and bracket General info: Max. operating range: Light source: Ambient light: 12m LED Lux Shines: When the beam is uninterrupted Flashes: When falling short of the functional reserve Off: When the beam is interrupted Technical data Voltage: No load current: Power consumption: Output Signal output: Switching voltage: Switching current: V AC/DC 8.5 ma 0,2W at 24V DC Relay, 1 inverter 230 volt AC max.2a

14 INSTALLATION OPTIONS Fire Curtain Technologies: 1 Self-Perform Provides installation and technique guides. Supports customer by and teleconference. 2 Outside Contractor Fire Curtain Technologies: Provides installation and technique guides. Supports outside contractor by and teleconference. Fire Curtain Technologies: 3 Onsite Supervision Technician visits on site and instructs local team to get the materials unpacked, inventoried and organized. Get projects started (or finished) with the install and even sign off on the work once completed as time and budget allow.