9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series

Transcription

1 COMMERCIAL LASERS 9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series Key Features Diffraction-limited light delivered through fiber termination module Single transverse mode, collimated beam Light focusable to <10 µm spot Sophisticated control electronics Compact, air-cooled 1 µm wavelength Applications Marking Precision cutting and welding High resolution soldering Micro-adjustment Etching Drilling and trimming Thermal platesetting/proofing As a compact, turnkey laser system, the JDSU IFL Series provides up to 25 watts of the brightest, diffraction-limited infrared laser light available. JDSU combines very high brightness fiber-coupled laser diodes with heatsink and fan along with a power supply and control electronics in one complete package. Circular spots as small as a few microns in diameter can be focused onto the workpiece or thermal media with a long working distance, providing the user with an intense, non-contact heat source. The nominal output wavelength of the fiber laser is 1 µm. One of the key benefits of the fiber laser is its compact size and fiber delivery, allowing easy placement into industrial and manufacturing environments. Designed to be simple to operate, the IFL Series requires only standard wall plug power and direct air cooling. It can be monitored and controlled by customer supplied interface electronics via a 40-pin analog connector or by RS232 computer control. NORTH AMERICA: JDSU (5378) WORLDWIDE: JDSU WEBSITE:

2 EMISSION INDICATOR SYSTEM POWER OFF ON LASER POWER ON ERROR RS232 DISABLED LASER OUTPUT + + Ð + Ð IFL SERIES 2 Dimensions Diagram (Specifications in inches [mm] unless otherwise noted.) FRONT VIEW SIDE VIEW 6.6 (168) 0.25 (6) 13.1 (333) 15.0 (381) 0.5 (13) Connector Locations REAR VIEW FIBER OUTPUT RS 232 CONNECTOR RS-232 DATA CONNECTOR 40 PIN DATA CONNECTOR TERMINAL BLOCK REMOTE INTERLOC K REMOTE ON/OF F REMOTE WA RNING REMOTE STOP AC POWER CONNECTOR

3 3 Termination Module A MOUNTING SURFACES (38.1) AVOID EXPOSURE LASER RADIATION IS EMITTED FROM THIS APERTURE MOUNTING HOLE M5 THREAD MOUNTING HOLE 8-32 THREAD 1.30 (33.0) 1.80 (45.7) 5.00 (127.0) 0.95 (24.1) Termination Module B #8-32 UNC-28 AVOID EXPOSURE LASER RADIATION IS EMITTED FROM THIS APERTURE 2.40 (61.0) 1.60 (40.6) Ø1.00 (25.4) MOUNTING SURF. 2x #6-32 UNC-2B

4 4 Specifications Parameter IFL9 IFL15 IFL25 Optical Power output 9.0 W 15.0 W 25.0 W Power monitor calibration ±8% full scale Auto-power shut-off >10% over rated power Control modes Current or power selectable Peak wavelength range 1110±5 nm Bandwidth 1.7 nm (FWHM) typical Collimated Output Beam With termination module A Beam diameter 7.3±0.5 mm (nominal, 1/e 2, full width) Beam divergence 0.11 mrad (nominal, 1/e 2, half angle) Beam centration 500 µm (w.r.t. central axis) Beam pointing 2.0 mrad Beam circularity 1.1 With termination module B Beam diameter 0.464±0.014 mm (nominal, 1/e 2, full width) Beam divergence 1.6 mrad (nominal, 1/e 2, half angle) Beam centration 100 µm (w.r.t. central axis) Beam pointing 2.0 mrad Beam circularity 1.1 Electrical Input power 100 to 120 or 200 to 240 V AC, 50 to 60 Hz Risetime <350 µs. Pulsed mode emission available through TTL pulsed input Control RS232 interface or analog interface Mechanical Cool air flow Internal fan. At least 3 (80 mm) clearance, both sides Weight 30.2 lbs (13.7 kg) typical Output fiber Length 22 ft. (6.7 meters) typical Minimum static bend radius 35 mm Minimum dynamic bend radius 65 mm Environmental Operating temperature 5 to 30 C Storage temperature -20 to 55 C Humidity 5 to 85%, non-condensing Application set-up No laser radiation allowed to be back-reflected into the termination module output aperture Notes: Termination optics specifically designed to meet application requirements available upon request.

5 5 Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at JDSU (5378) in North America and JDSU worldwide or via at Sample: IFL-25-TM-A IFL- TM- Code Output Power 09 9 W W W Code A B Termination Module A B User Safety Safety and Operating Considerations The laser light emitted from this laser system is invisible and will be harmful to the human eye. Proper laser safety eyewear must be worn during operation. CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION FIBER LASER: 1110 nm 35 W max DIODE PUMP: 915 nm 70 W max CLASS 4 LASER PRODUCT IEC REV A Compliance with Regulatory Requirements The Industrial Fiber Laser System is an OEM version of a JDSU diode-pumped solid-state laser and as such only intended for integration into other equipment. These lasers do not comply with CDRH. The customer is responsible for CDRH certification of the system incorporating the Industrial Fiber Laser System. The unit has been designed and tested to comply with the following standards: - Electromagnetic Compatibility, EN Radio Disturbance, EN Low Voltage Directive, 73/23/EEC - FCC Part 15, Class A - Electrical Safety, EN 61010A-1 and UL 61010A-1 All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders JDS Uniphase Corporation. All rights reserved Rev /05 IFL.DS.CL.AE NORTH AMERICA: JDSU (5378) WORLDWIDE: JDSU WEBSITE: