ELC International Inc

Transcription

1 (Loss Control through Engineering) Company Profile & Capability Document

2 INTRODUCTION ELC International Inc., an independent consultancy firm established in 2006, specializes in providing engineering solutions in the field of Process and Industrial Safety, Hazard Identification, Risk Assessment and Loss Control to Oil Refineries, Petrochemical, Gas Processing Plants, and Oil Sands production. ELC International Inc. has the expertise necessary to identify the hazards, assess risks and provide practical, pragmatic, site specific and cost effective solution to all problems related to Safety & Loss Control for the protection of life, assets and the environment. ELC International Inc. is committed to provide professional, timely, and tailored engineering solution to our clients that will meet their requirements and exceed their expectations. This document provides an overview of the wide range of services offered by ELC International Inc.

3 MISSION STATEMENT ELC International Inc. is committed to provide quality engineering services to assist our clients in controlling and mitigating harm to people and financial losses from preventable causes and improve their profitability.

4 SERVICES OFFERED DESIGN SAFETY Design Safety support for projects, large or small, from conceptual stage to construction, is available covering the following areas: Safety Philosophy Safety Concept Fire Prevention and Flammable/Toxic Gas detection Philosophy Emergency Response Plan: Identify credible emergency scenarios and determine mitigation measures. Produce a plan identifying responsible personnel, line of command, procedure(s) to be followed, means of communication, resources to be deployed and post-incident recovery. Active Fire Suppression Systems (deluge, water mist, clean agent, foam) Fire water (FW) system design: FW demand, FW storage, FW main and jockey pump capacity and sparing philosophy, FW ring main routing and sizing, and location of isolation valves, hydrants, and monitors. Passive Fire Protection: Assess pool and jet fire hazard, recommend where passive fire protection is needed (pipe rack support, vessel skirt, cable tray etc), what type (SS jacketing on process insulation, cement-based, epoxy), and to what extent. Consequence Analysis: Model potential loss of containment using Phast (or equivalent) software to determine the extent of thermal radiation (jet, pool or flash fire), blast overpressure, threshold limit value (TLV) boundaries for toxic components and probable loss of life/ maximum foreseeable loss. Fire and Gas Detection Systems: Assess probable sources of loss of containment, determine location of the detectors, type of detectors (3IR, infrared, catalytic bead, point vs. open path), voting logic and action upon activation. Plant Layout Review: Ensure compliance with customer s, national and international codes and standards, recommend inter-unit and interequipment spacing and arrangement, mitigate identified hazards, recommend location of permanent and portable occupied buildings.

5 Code analysis: Compliance with Alberta/National Building and Fire Codes Escape, Evacuation and Rescue Analysis (EERA): Analyze the requirements for escape, evacuation and rescue for major accident hazards (MAH) scenarios and recommend measures to reduce risk of harm to people to as low as reasonably practicable (ALARP). Provide EERA plan/drawings showing escape/ evacuation routes, and muster and embarkation points. Safety Equipment Analysis (type, quantity, and location) Third party review of Consultant s reports and studies TRAINING The following training courses tailored to meet your organization s specific needs are offered on an in-house basis at your premises providing the most cost effective means of meeting the training needs of your personnel: Safety and Loss Control Management Hazard and Operability Study (HAZOP) Accident/Incident Investigation Permit to Work System Confined Space Entry Occupational Health H2S Hazards Other courses can be arranged to meet the specific needs of your organization. PROCEDURES & MANUALS Loss Control Standard Manual Safety Procedure & Regulation Manual Emergency Plan & Procedure Manual Hazardous Substance Manual Safety Equipment Specification Manual Engineering Standards

6 OUR TEAM Highly qualified professionals with unique international experience and expertise in the field of Design Safety, Occupational Health, Hazard Analysis and Loss Control are available to provide necessary services to our clients. This expertise can be supplemented by use of associated consultants if needed. PROFILE OF THE PRESIDENT Muhammad Tariq, CEO and President of ELC International Inc., is a Chemical Engineer with a Post Graduate Diploma in Business Administration. He is a Certified Fire Protection Specialist (an ANSI accredited certification program from NFPA).He has 43 years of professional experience working with Refineries, Petrochemical, Gas Liquefaction plants, EPC companies and Regulatory industry. Muhammad is a Professional Engineer licensed in the provinces of Ontario and Alberta in Canada and is a voting member of National Fire Protection Association (NFPA). Muhammad had been an Associate Accredited Safety Auditor from Det Nortske Veritas (DNV), USA, Professional Member of American Society of Safety Engineers and International Society of Risk & Safety Management, UK. Muhammad has extensive experience in the field of Design and Industrial Safety, Health and Environment including the development of HSE management systems, conducting training courses, and writing standards and specifications.