WP4086 Condition Monitoring System

Size: px
Start display at page:

Download "WP4086 Condition Monitoring System"

Transcription

1 WP4086 Condition Monitoring System WP4086 Condition Monitor The WP4086 CMS System surveys vibrations with up to 8 external accelerometers Real-time sample, calculation and storage of vibration signals, including wind turbine operation parameters Calculation of time domain characteristics: Broad band characteristics Vibrovelocity calculation Calculation of frequency domain characteristics: FFT Amplitude Spectra FFT Envelope Spectra Frequency selective chartacteristics Accelerometer Measuring Points Automatic storage of daily data set and raw data Kinematic frequencies configuration Individual measurement task scheduler for specific wind turbine Fault features detection from time domain and frequency domain characteristics when exceeding pre-defined threshold limits Advanced warning and alarm handling The WP4086 Condition Monitoring System The WP4086 Condition Monitoring System is used for vibration analysis It surveys predetermined critical vibration levels The frequency range is Hz and the vibration range g When using 786A ICP accelerometer, the ranges are up to 10,000 Hz and 15 g The module is used for permanent surveillance of low and high frequency vibrations in wind turbines and other applications The measurement of vibrations is performed by means of up to 8 external accelerometers The real-time measurement of vibrations is controlled by a flexible measurement task scheduler, which can be individually configured with time and frequency domain calculations The alarm is intended to operate a remote warning system through the communication channel The alarm can also be used to shut down the wind turbine The alarm and warning circuit have two additional potential free relay outputs for communication with other related controller systems The Mita-Teknik SCADA system Gateway is used for configurations, bearing and gear database, and analysis of vibration characteristics Including generation of reports generation of diagnostic reports The PC is used during installation and periodic maintenance It is possible to perform new configuration of threshold levels and kinematic frequencies If the WP4086 is connected via communication to a Mita- Teknik controller it is possible to receive wind turbine realtime data which is stored with the vibration characteristics The WP4086 provides permanent surveillance using an internal alarm or warning level The alarm and warning level as well as the delay time can be set by the user MT_WP4086_DataSheet_R5_ Mita-Teknik All rights reserved

2 WP4086 Condition Monitoring System Build-up WP4086 Condition Monitor Acceler ometer 1 Acceler ometer 8 F I L T E R 1 F I L T E R 2 0 DSP CPU Serial Communication RS485 Sensor OK Relay No Alarm Relay OPTION Analog Output Technical Data Supply Voltage Nominal Allowed range Current Consumption Typical Power Consumption Typical 24 VDC 216 to 264 VDC 220 ma 300 ma 53 W 80 W Analog Input No of points 8 Resolution 12 bit Sample rate bit/s Automatic Gain Adjustment Full Scale Vibration Range Before Antialiasing filter (Automatic Range Shift) WP4086 ICP acc 03 g 03 g 09 g 10 g 10 g 30 g 50 g 50 g 150 g Amplifier after Antialiasing filter Automatic range shift Resolution x1,x2,x4,x5,x8,x10,x16,x g Alarm Level (Acceleration) WP4086 ICP acc Minimum 0010 g 0010 g 5000 g g MT_WP4086_DataSheet_R5_ Mita-Teknik All rights reserved

3 WP4086 Condition Monitoring System Technical Data Signal Analysis Time domain characteristics Frequency domain characteristics FFT Analysis Range 01 Hz -100 Hz Range 20 Hz Hz Range 200 Hz Hz Range 2000 Hz Hz Range 2000 Hz Hz Sample Time Range 01 Hz -100 Hz Range 20 Hz Hz Range 200 Hz Hz Range 2000 Hz Hz Range 2000 Hz Hz Alarm Delay Minimum Broad band characteristics Vibrovelocity calculation FFT Amplitude Spectra FFT Envelope Spectra Frequency selective chartacteristics 0,011 Hz 0,028 Hz 0,289 Hz 1,445 Hz 1,445 Hz 86,5 sec 34,6 sec 3,46 sec 0,69 sec 0,69 sec 00 sec 255 sec Digital Output No of points 2 Isolation Relay Rated current per point 1 ADC Rated voltage per point 42 VDC Minimum load 10 uw Ports for Optional Serial Communication No of ports 1 Communication interfaces M-NET optical M-NET Optical Port for RS485 Communication Communication speed Max cable length Recommended cable type Termination BAUD 1 Km 1 x 2 x 025 w/shield Built-in Permissible Ambient Conditions Operation temperature -20 to 60 C Transportation/storage temperature -40 to 85 C Max relative humidity 95% no condensation Max operation height 2000 m above sea level (higher levels only by special agreement with Mita-Teknik) Construction Dimensions (WxHxD) 70 x 150 x 295 mm MT_WP4086_DataSheet_R5_ Mita-Teknik All rights reserved

4 WP4086 Condition Monitoring System Technical Data Weight Degree of Protection Degree of protection Standards 0900 Kg IP30 EN (CE) EN (CE) EN (Surge) Mita-Teknik Ordering Information Order Number Order Name WP4086 Condition Monitor 8 channels WP4086 Condition Monitor 8 channels, 625µ SP WP4086 Condition Monitor 8 channels, RS WP4086 Condition Monitor 8 channels, 2 ICP, 625µ SP WP4086 Condition Monitor 8 channels, 2 ICP, RS232 Accessories WP4088 Accelerometer, 5g, 10 m PVC Cable consists of: WP4088 Accellerometer, 5 g, 05 mcable, PVC WP4088 Cable, 95 m, PVC WP4088 Accelerometer, 5 g, 10 mcable, Halogen free consists of: WP4088 Accelerometer, 5 g, 05 m Cable, Halogen free WP4088 Cable, 95 m Halogen free ICP accelerometer with cable, isolating stud MT_WP4086_DataSheet_R5_ Mita-Teknik All rights reserved

5 WP4084 Vibration Analyser WP4084 vibration analyser for Surveys vibrations in up to 2 directions Self-test circuit for vibration sensor check RS485 communication Setting of all parameters by using a supplied PC program or via the WP controller by communication The WP4084 Vibration Analyser The WP4084 Vibration Analyser is used for surveying vibrations in up to 2 directions It surveys that critical vibration levels are not exceeded The frequency range is of Hz and vibration range 001 g to 0300 g Used for permanent surveillance of low frequency vibrations in wind turbines and other applications The measurement of vibrations is done by means of one or two accelerometers mounted in the WP4084 Build-up With two accelerometers it is possible to measure vibrations in x and y direction With one accelero-meter in the x direction, one or two frequencies can be monitored The WP4084 provides permanent surveillance using an internal alarm level The alarm level and the delay time can be set by the user The accelerometer self test is automatically executed every hour The PC is used for parameter setup by means of a PC program supplied by us The PC is useful during installation and periodic maintenance if there is no permanent communication to a main controller The PC program makes it possible to adjust: Center frequency Fo, bandwidth BW, alarm level, delay time and relay function If the WP4084 is connected via communication to one of our controllers the adjustment will be done via the controller Hereby, it is possible to define a lower warning level for preparing the next maintance of the monitored process The measurement of vibrations is done by means in the vibration level The alarm circuit has potential free relay outputs The alarm is intended to operate a remote warning system and can also be used to shutdown the monitored process The internal watchdog surveys the power supply, cable ruptures and accelerometer test function MT_WP4084_DataSheet_R3_ Mita-Teknik All rights reserved

6 WP4084 Vibration Analyser Build-up WP4084 Vibration Analyser Acceler ometer 1 Acceler ometer 2 F I L T E R 1 F I L T E R CPU Serial Communication RS485or CANBUS Sensor OK Relay No Alarm Realy OPTION Analog Output 2 Technical Data Supply Voltage Nominal Allowed range Current Consumption Typical Power Consumption Typical 24 VDC 216 to 264 VDC 80 ma 250 ma 19 W 66 W Vibration Input Alarm level (acceleration) Minimum 0100 m/s m/s2 Minimum 0010 g 0300 g Resolution C, typical <0003 g Frequency Filter Frequency Range Minimum Resolution 010 Ηz 500 Ηz 001 Hz MT_WP4084_DataSheet_R3_ Mita-Teknik All rights reserved

7 WP4084 Vibration Analyser Technical Data Frequency Bandwith BW (80dB/decade) depends on the center frequency Fo Selectable in 5 steps Minimum Fo/40 Hz Fo/2 Hz Reaction time (depends on center frequency Fo) Minimum 1 sec 6 sec Alarm Delay Minimum Relay breaking voltage breaking current breaking current Ports for Optional Serial Communication No of ports Port for RS485 Communication Communication speed Max cable lenght Recommended cable type Termination Connector 01 sec 255 sec 42 V 1 A AC, 60VA 1 A DC, 30W 1 M-NET Optical M-NET Optical BAUD 1 km 1 x 2 x 025 w/shield Build-in 7-pin IP67 connector Permissible Ambient Conditions Operation temperature -30 to +60 C Transportation/Storage temperature -40 to +85 C Max relative humidity 95% no condensing Max operation height 2000 m above sea level (higher levels only by special agreement with Mita-Teknik) Construction Dimensions (WxHxD) Weight Degree of Protection Degree of Protection Standards 175 x 80 x 60 mm 0680 Kg IP67 EN (CE) EN (CE) EN (Surge) MT_WP4084_DataSheet_R3_ Mita-Teknik All rights reserved

8 WP4084 Vibration Analyser Mita-Teknik Ordering Information Order Number XX without cable (more types) Order Name WP4084 Vibration Analyser Accessories Cable with plug, 5 m Cable with plug, 8 m Cable with plug, 11 m Twisted pair cable with shield (only RS485 communication) x 2 x 05 mm2,tp cable with plug, 5 m x 2 x 05 mm2,tp cable with plug, 10 m x 2 x 05 mm2,tp cable with plug, 15 m Using shielded cables, it is not possible to use of relay out MT_WP4084_DataSheet_R3_ Mita-Teknik All rights reserved

9 WP4088 Accelerometer External Accelerometer for the WP4086 condition monitor Designed for easy mounting The WP4088 Accelerometer It is important that the corresponding measurement equipment is epuipped with a real analog differential input Hardware Compensation Values Due to the accelerometer internal are AC coupled, with a build-in highpass filter, the signal respons is not linear below 1 Hz The highpass filter have a cut-off frequency on 01 Hz The following conpensation factors have to be integrated into the measuring unit Compensation Factor: Hz The conpensation curve will follow a normal 1 pole high pass filter curve with a cut off frequency of 01 Hz MT_WP4088_DataSheet_R3_ Mita-Teknik All rights reserved

10 WP4088 Accelerometer Build-up Grey 1 Signal + Frequency [hz] Compensation value Rosa Green Yellow & white Brown 2 Signal - 3 Overload 4 GND VDC Housing 6 Shields Technical Data Power Supply Typical 5V DC +/- 5% Current Measurement Range Horizontal direction Vertical direction Frequency Range Sensitivity 20 ma 0-50 g peak 0-40 g peak Hz +/- 3 db Hz +/-3 db 500 mv/g (differental voltage) Permissible Ambient Conditions Operation temperature -20 to 60 C Transportation/Storage temperature -40 to 85 C Max relative humidity 95% no condensation Max operation height 2000 m above sea level (higher levels only by special agreement with Mita-Teknik) Construction Dimensions (W) Diameter Weight Mounting Standards Standards 65 mm 30 mm hexagon 0150 kg M8 EN (CE) EN (CE) EN (Surge) MT_WP4088_DataSheet_R3_ Mita-Teknik All rights reserved

11 WP4088 Accelerometer Mita-Teknik Ordering Information Order Number Order Name WP4088 Accelerometer, 5g, 10 m PVC Cable Consists of: WP4088 Accellerometer, 5 g, 05 mcable, PVC WP4088 Cable, 95m, PVC WP4088 Cable, 145m, PVC WP4088 Accelerometer, 5g, 10 mcable, Halogen free Consists of: WP4088 Accellerometer, 5 g, 05 m Cable, Halogen free WP4088 Cable, 95m Halogen free MT_WP4088_DataSheet_R3_ Mita-Teknik All rights reserved

12 Accelerometer 100MV/G 80G 786A Rugged design Corrosion resistant Hermetic seal Case isolated ESD protection Reverse wiring protection Mounting Instruction Connector Pin Shell A B Function ground power/signal commom (Ø = 22 mm) (53 mm) (3,8 mm) MT_Accelerometer Model 786_DataSheet_R3_ Mita-Teknik All rights reserved

13 Accelerometer 100MV/G 80G 786A Technical Data Dynamic Sensitivity, ± 5 %, 25 C 100 mv/g Acceleration range 80 g peak Amplitude nonlinearity 1% Frequency response: ± 5 % Hz ± 10 % Hz ± 3 db Hz Resonance frequency 30 khz Transverse sensitivity, max 5 % of axial Temperature response: -50 C -5% +120 C 5% Electrical Power requirement: Voltage source VDC Current regulating diode 2-10 ma Electrical noise, equiv g: Broadband 25 Hz to 25kHz 700 µg Spectral 10 Hz 10 µg/ Ηz 100 Hz 5 µg/ Ηz 1000 Hz 5 µg/ Ηz Output impedance, max 100 Ω Bias output voltage 12 VDC Grounding Case isolated, internally shielded Environmental Temperature range -50 to 120 C Vibration limit 500 g peak Shock limit 5000 g peak Electromagnetic sensitivity, equiv g, max 70 µg/gauss Sealing Hermetic Base strain sensitivity, max g/µstrain Physical Sensing element design Weight Case material Mounting Output connector Mating connector Recommend cabling PZT ceramic / shear 90 grams 316L stainless steel 1/4-28 UNF tapped hole 2 pin, MIL-C-5015 style R6 type J10 / J9T2A MT_Accelerometer Model 786_DataSheet_R3_ Mita-Teknik All rights reserved

14 Accelerometer 100MV/G 80G 786A Mita-Teknik Ordering Information Order Number Order Name Accelerometer 100MV/G 80G 786A ICP Acc with stud & cable Accessories ICP acc cable, 10 m Mounting stud SF8 MT_Accelerometer Model 786_DataSheet_R3_ Mita-Teknik All rights reserved

condition monitoring WP4086 Condition Monitoring System The WP4086 CMS System surveys vibrations with up to 8 external accelerometers

condition monitoring WP4086 Condition Monitoring System The WP4086 CMS System surveys vibrations with up to 8 external accelerometers WP4086 Condition Monitoring System WP4086 Condition Monitor Accelerometer Measuring Points The WP4086 CMS System surveys vibrations with up to 8 external accelerometers Real-time sample, calculation and

More information

Sentry G3 Machinery Protection Monitor

Sentry G3 Machinery Protection Monitor TECHNICAL INFORMATION Sentry G3 Machinery Protection Monitor CONDITION MONITORING SOLUTIONS The Sentry G3 Machinery Protection Monitor is a high performance signal conditioning unit; providing a universal

More information

MODEL 834M1 ACCELEROMETER

MODEL 834M1 ACCELEROMETER SPECIFICATIONS Triaxial Piezoelectric Accelerometer

More information

MODEL 4000A & 4001A ACCELEROMETER

MODEL 4000A & 4001A ACCELEROMETER MODEL 4000A & 4001A ACCELEROMETER dimensions 4001A Connector Attachment SPECIFICATIONS Silicone MEMS Accelerometer Signal Conditioned Output Temperature Calibrated Low Cost, Lightweight The Model 4000A

More information

MODEL ACCELEROMETER

MODEL ACCELEROMETER MODEL 8711-01 ACCELEROMETER SPECIFICATIONS Industrial IEPE Accelerometer Low Cost, Quick Delivery -55 C to +125 C Operating Range Top Exit Connector DIMENSIONS The Model 8711-01 are internally shielded

More information

Sentry G3 Machinery Protection Monitor

Sentry G3 Machinery Protection Monitor TECHNICAL INFORMATION Sentry G3 Machinery Protection Monitor CONDITION MONITORING SOLUTIONS The Sentry G3 Machinery Protection Monitor is a high performance signal conditioning unit; providing a universal

More information

M7100 Pressure Transducer

M7100 Pressure Transducer SPECIFICATIONS Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces

More information

15203B 25203B 35203B Uniaxial Biaxia Triaxial

15203B 25203B 35203B Uniaxial Biaxia Triaxial Uniaxial Biaxia Triaxial SPECIFICATIONS Digital Accelerometers User Configurable ±1 g to ±15 g Inertial Measurements Made Fast and Easy FEATURES AND BENEFITS User Configurable Settings The analog/digital

More information

CE110I. Piezoelectric accelerometer with integrated electronics. IECEx

CE110I. Piezoelectric accelerometer with integrated electronics. IECEx Piezoelectric accelerometer with integrated electronics FEATURES» From the Vibro-Meter product line» Designed for medium temperature industrial applications: 55 to 115 C» Sensitivity: 100 mv/ g» Frequency

More information

02/11/2015

02/11/2015 MIC48 With RS 485 link Part number 89422418 Heating and / or cooling function 2 independent alarms Load break detection 2 setpoint which can be selected remotely Manual / automatic power adjustment RS

More information

OPERATION MANUAL MODEL & ACCELEROMETER

OPERATION MANUAL MODEL & ACCELEROMETER OPERATION MANUAL MODEL 8011-01 & 8021-01 ACCELEROMETER TE CONNECTIVITY SENSORS///MODEL 8011-01 & 8021-01 ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted

More information

02/11/2015

02/11/2015 CTH 46 - CTD 43 / 46 CTD 46 Part number 89422108 CTH 46 Heating / cooling function Measurement and setpoint display CTD 43 Heating or cooling function Measurement display Measurement deviation display-setpoint

More information

Instruction VIBROCONTROL 850. Single channel vibration monitor. Keep it accessible for future reference.

Instruction VIBROCONTROL 850. Single channel vibration monitor. Keep it accessible for future reference. Instruction VIBROCONTROL 850 Single channel vibration monitor Keep it accessible for future reference. Copyright 2017 Brüel & Kjaer Vibro GmbH All rights to this technical documentation remain reserved.

More information

New Sensing products of Meggitt Group. Moscow - October the 23 rd

New Sensing products of Meggitt Group. Moscow - October the 23 rd New Sensing products of Meggitt Group Moscow - October the 23 rd Today s agenda - Who s Meggitt Sensing System - The Measurement division - Sensor production - 2013 released and new incoming products -

More information

DSF xx15.xx xhv Ex-Atex Ex-Atex Certified Two wire Hall Effect Speed Sensor

DSF xx15.xx xhv Ex-Atex Ex-Atex Certified Two wire Hall Effect Speed Sensor DSF xx15.xx xhv Ex-Atex Product ID Type # Product # Drawing # DSF 1215.01 SHV Ex-atex (5m) 304Z-05197 113216 DSF 1415.01 AHV Ex-atex S148 304Z-05256 113351 DSF 1615.01 SHV Ex-atex (5m) 304Z-05196 113214

More information

Frequently asked questions: Intelligent Transmitter Series

Frequently asked questions: Intelligent Transmitter Series Frequently asked questions: Intelligent Transmitter Series The Wilcoxon family of Intelligent Transmitters, relay alarms, and communication modules can be used to implement low-cost online vibration monitoring

More information

Wind power Condition Monitoring. Condition Monitoring Systems (CMS) in wind turbines CMS. Authors: Martin Kluge Michael Danitschek

Wind power Condition Monitoring. Condition Monitoring Systems (CMS) in wind turbines CMS. Authors: Martin Kluge Michael Danitschek Systems (CMS) in wind turbines CMS Authors: Martin Kluge Michael Danitschek update: 22.07.2010 page 1 Intelligent vibration monitoring of wind turbines Targets Permanent plant/system protection Reduction

More information

FT702LT Turbine control wind sensor gives durability a new meaning FT702LT. series

FT702LT Turbine control wind sensor gives durability a new meaning FT702LT. series FT702LT Turbine control wind sensor......gives durability a new meaning FT702LT series Proven High Availability The FT702LT ultrasonic anemometer is the result of FT Technologies 10 years of experience

More information

Erbium-Doped Fiber Amplifier (EDFA) - MW Series

Erbium-Doped Fiber Amplifier (EDFA) - MW Series Nanovation s MW series of EDFA products is designed for applications in advanced dense wave division multiplexing (DWDM) systems where high performance and reliability are critical. They are available

More information

Communications None RS-232C RS-422* RS-485* BCD Transmission output*/** (4 to 20 ma) E5AX- E5AX- L(M)A02 L(M)A03

Communications None RS-232C RS-422* RS-485* BCD Transmission output*/** (4 to 20 ma) E5AX- E5AX- L(M)A02 L(M)A03 Digital Controller A 96 x 96-mm (DIN) Digital Process Controller Optimum PID control with feed-forward control circuitry. High accuracy (+0.3% FS +1 digit max.). Replaceable Output Units. Models with communications

More information

CCD-Precision. Intelligent Laser-Optical Displacement Measurement. CCD System SENSORS & SYSTEMS. Authority in Displacement Measurement ILD 1800

CCD-Precision. Intelligent Laser-Optical Displacement Measurement. CCD System SENSORS & SYSTEMS. Authority in Displacement Measurement ILD 1800 SENSORS & SYSTEMS Authority in Displacement Measurement CCD-Precision high accuracy and resolution compact sensor design 5 khz frequency N ILD 1800 TRIANGULATOI PRINCIPLE OPTO NCDT Intelligent Laser-Optical

More information

Advanced Diagnostic Gateway with Ethernet and FF-H1 Interface and I/O. Assembly

Advanced Diagnostic Gateway with Ethernet and FF-H1 Interface and I/O. Assembly Advanced Diagnostic Gateway with Ethernet and FF-H1 Interface and I/O Features Assembly System integration kit for Advanced Diagnostics PCS integration via Diagnostic Manager or device DTM Simple automatic

More information

Oxygen (O2) Single-Point Gas Detection System

Oxygen (O2) Single-Point Gas Detection System Oxygen (O) Single-Point Gas Detection System DESCRIPTION Wall-mounted gas monitor with built-in oxygen (O) sensor, accepts one analog remote device such as a secondary gas sensor, temperature or humidity

More information

RTA421. Technical Information. Limit alarm switch Alarm switch and power supply for monitoring current or voltage signals

RTA421. Technical Information. Limit alarm switch Alarm switch and power supply for monitoring current or voltage signals Technical Information RTA421 Limit alarm switch Alarm switch and power supply for monitoring current or voltage signals Application Plant and machine construction Panel builders Process monitoring Process

More information

D5100 Industrial Differential Pressure Transducer

D5100 Industrial Differential Pressure Transducer FEATURES Heavy Industrial CE Approval (amplified only) As Low As ±0.1% Pressure Non Linearity Rugged Construction: Can Withstand 50g Shock/20g Vibration Up to -40 C to +125 C Operating Temperature Range

More information

DSF xx10.xx xhv Ex-Atex Hall Effect Single Channel Speed Sensor

DSF xx10.xx xhv Ex-Atex Hall Effect Single Channel Speed Sensor Product ID Type # Product # Drawing # DSF 1210.00 SHV Ex-atex (2m) 374Z-05066 110428F1 DSF 1210.00 SHV Ex-atex (5m) 374Z-05176 110428F1 DSF 1210.00 SHV Ex-atex (10m) 374Z-05590 110428F1 DSF 1410.00 SHV

More information

RS485 MODBUS Module 8AI

RS485 MODBUS Module 8AI Version 1.4 15/04/2013 Manufactured for Thank you for choosing our product. This manual will help you with proper support and proper operation of the device. The information contained in this manual have

More information

DGC-500 DIGITAL GENSET CONTROLLER

DGC-500 DIGITAL GENSET CONTROLLER DGC-500 DIGITAL GENSET CONTROLLER Basler Electric s Digital Genset Controller (DGC-500) offers a low cost microprocessor based integrated alternative for the control and monitoring of small to medium sized

More information

DPR-145 TEMPERATURE PROTECTION RELAY. DPR-145 User Manual V-2.0 ( ) PT100 INPUTS: 4 RELAY OUTPUTS: 4 RS-485 MODBUS PORT VDC SUPPLY -1-

DPR-145 TEMPERATURE PROTECTION RELAY. DPR-145 User Manual V-2.0 ( ) PT100 INPUTS: 4 RELAY OUTPUTS: 4 RS-485 MODBUS PORT VDC SUPPLY -1- DPR-45 User Manual V-2.0 (2..206) DPR-45 TEMPERATURE PROTECTION RELAY PT00 INPUTS: 4 RELAY OUTPUTS: 4 RS-485 MODBUS PORT 9-50VDC SUPPLY DESCRIPTION DPR-45 is a precision unit designed for the temperature

More information

ISOMETER IRDH375. Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems)

ISOMETER IRDH375. Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) IRDH375_D00124_01_D_XXEN/07.2018 Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) Product

More information

I/A Series 716C 1/16 DIN Temperature Controller

I/A Series 716C 1/16 DIN Temperature Controller Product Specifications I/A Series 716C 1/16 DIN Temperature Controller PSS 2C-1B5 A The Foxboro 716C is a powerful compact, 1/16 DIN, microprocessor-based temperature controller that offers a variety of

More information

D5100 Industrial Differential Pressure Transducer

D5100 Industrial Differential Pressure Transducer SPECIFICATIONS 316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) Variety of Pressure Ports and Electrical Connections

More information

CTT8 TEMPERATURE MONITOR DEVICE

CTT8 TEMPERATURE MONITOR DEVICE INSTRUCTION MANUAL IM302-U v2.3 CTT8 TEMPERATURE MONITOR DEVICE GENERALITY The device of control temperatures CTT8 is used in the control of electric machine, transformer, motor, etc. where it s possible

More information

Two-Channel Gas Controller

Two-Channel Gas Controller Two-Channel Gas Controller Specifications subject to change without notice. USA 09 Page of DESCRIPTION Highly configurable, UL 0 performance-tested and -certified, and wall-mounted gas monitor; continuously

More information

Universal Input Digital Panel Meter With Bargraph, NA3

Universal Input Digital Panel Meter With Bargraph, NA3 products Panel Panel Meters Digital Universal Input Digital Panel Meter With Bargraph, NA3 Universale input (programmable) Wide voltage, AC/DC control 4 digit, With or without 3/7 colour bargraph Description

More information

Process Alarm Module RTA 421

Process Alarm Module RTA 421 Technical Information TI 074R/24/ae Process Alarm Module RTA 421 Alarm module and power supply for monitoring current or voltage signals Application Areas Plant and machine construction Panel builders

More information

CCD-Precision. Intelligent Laser-Optical Displacement Measurement. CCD System. SENSORS & SYSTEMS Authority in Displacement Measurement ILD 1800

CCD-Precision. Intelligent Laser-Optical Displacement Measurement. CCD System. SENSORS & SYSTEMS Authority in Displacement Measurement ILD 1800 SENSORS & SYSTEMS Authority in Displacement Measurement CCD-Precision high accuracy and resolution compact sensor design 5 khz frequency N ILD 1800 TRIANGULATOI PRINCIPLE OPTO NCDT Intelligent Laser-Optical

More information

Nitrogen Dioxide (NO2) Single-Point Gas Detection System

Nitrogen Dioxide (NO2) Single-Point Gas Detection System Nitrogen Dioxide (NO) Single-Point Gas Detection System DESCRIPTION Wall-mounted gas monitor with built-in nitrogen dioxide (NO)/diesel fume gas sensor, accepts one analog remote device such as a secondary

More information

Speed and Frequency Seite 1 von 7

Speed and Frequency Seite 1 von 7 Speed and Frequency Seite 1 von 7 E16 Systems for High Safety Speed ing, all with Triple Modular Redundancy. A choice of versions to meet various demands. Compliant with SIL3 / IEC 61508 and/or API 670.

More information

M5200 Industrial Pressure Transducer

M5200 Industrial Pressure Transducer SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof UL Certified Gage, Sealed, Compound

More information

MO n : 12JMC rév A

MO n : 12JMC rév A CTT8 MO n : rév A Page 2 / 18 MODIFICATIONS Rev. Description Date Checked by Approuved by Z Creation 2012/02/12 JMC LA A First issue 2012/02/14 JMC LA INDEX Page 3 / 18 GENERALITY 4 INTRODUCTION 4 ACCESSORIES

More information

General Specifications

General Specifications General Specifications GS J0H-0E Model MVHK Digital Limit Alarm (DC Type) with Active Color PV Display General This plug-in type Digital Limit Alarm for DC input receives DC current or DC voltage signal.

More information

PACSystems* RX3i. Thermocouple Input Module, 12 Channels, IC695ALG412. GFK-2578B October 2011

PACSystems* RX3i. Thermocouple Input Module, 12 Channels, IC695ALG412. GFK-2578B October 2011 October 2011 PACSystems* RX3i Thermocouple Input Module, 12 Channels, IC695ALG412 The PACSystems * Thermocouple Input module IC695ALG412 provides twelve isolated differential thermocouple input channels.

More information

IRtech. E instruments. IRtech Radiamatic IR20 LS series. Infrared Technology

IRtech. E instruments. IRtech Radiamatic IR20 LS series.  Infrared Technology E instruments IRtech Temperature range up to 2200 C Optical resolution up to 300:1 Close focus 0,5mm 8-14µm, 1.6µm, 1µm, 2.3µm, 3.9µm, 4.2µm, 4.6µm, 5.1µm and 7.9µm Spectral response Dual laser true target

More information

WIO200 Water In Oil measuring instrument

WIO200 Water In Oil measuring instrument WIO200 Water In Oil measuring instrument You have made the right decision by choosing a measuring instrument from PAJ Systemteknik. Many customers buy our high standard products every year. There are at

More information

MEMS Accelerometer ICs. AMR Magnetic Sensor ICs. Gas Flow Modules. Differential Pressure Sensors. Tilt Modules. Current Sensors

MEMS Accelerometer ICs. AMR Magnetic Sensor ICs. Gas Flow Modules. Differential Pressure Sensors. Tilt Modules. Current Sensors MEMS Accelerometer ICs AMR Magnetic Sensor ICs Gas Flow Modules Differential Pressure Sensors Tilt Modules Current Sensors MEMSIC s unique thermal technology uses heated gas molecules to detect acceleration

More information

Danfoss gas detection units

Danfoss gas detection units Data sheet Danfoss gas detection units Types GD Premium, Premium+, Premium Duplex, Premium Remote, Premium Flex and Premium Uptime The Premium line gas detection units are used for monitoring and warning

More information

Labkotec Ice Detector

Labkotec Ice Detector Labkotec Ice Detector LID 3300IP Level and flow know-how since 1964 Benefits of using Ice Detector Stops wind turbine to prevent icethrow Safety first of all! Safety device Authorities / construction licence

More information

Model A-5. Low Range Wet/Wet Differential Pressure Transducer DESCRIPTION FEATURES

Model A-5. Low Range Wet/Wet Differential Pressure Transducer DESCRIPTION FEATURES Low Range Wet/Wet Differential Pressure Transducer DESCRIPTION The Model A-5 low range wet/wet differential pressure transducer offers a stainless steel assembly. The Model A-5 line pressure zero shift

More information

4-20mA CYBER Cyber Transmitter for flammable, toxic and IR gas detection Cyber Head Increased security in ATEX certified head

4-20mA CYBER Cyber Transmitter for flammable, toxic and IR gas detection Cyber Head Increased security in ATEX certified head 4-20mA CYBER Cyber Transmitter for flammable, toxic and IR gas detection Cyber Head Increased security in ATEX certified head NET DRAFT version 2.1-2008 Pag. 1 4-20mA Cyber - DRAFT version 2.1-2008 Pag.

More information

OilSET Installation and Operating Instructions. Oil Separator Alarm Device

OilSET Installation and Operating Instructions. Oil Separator Alarm Device Labkotec Oy Myllyhaantie 6 FI-33960 PIRKKALA FINLAND Tel: +358 29 006 260 Fax: +358 29 006 1260 18.11.2010 Internet: www.labkotec.fi 1/10 OilSET-1000 Oil Separator Alarm Device Copyright 2010 Labkotec

More information

CA 134. Piezoelectric accelerometer. IECEx NEPSI TIIS KGS. » From the Vibro-Meter product line» Vibration monitoring over a wide temperature

CA 134. Piezoelectric accelerometer. IECEx NEPSI TIIS KGS. » From the Vibro-Meter product line» Vibration monitoring over a wide temperature FEATURES» From the Vibro-Meter product line» Vibration monitoring over a wide temperature range, including cryogenic temperatures» Differential output» Hermetically welded» Certified for use in potentially

More information

U86B. Urea Dosing SPECIFICATIONS FEATURES APPLICATIONS

U86B. Urea Dosing SPECIFICATIONS FEATURES APPLICATIONS SPECIFICATIONS Mountable with O-ring seal Stainless Steel wetted surfaces Amplified ASIC calibrated Absolute, sealed gage Cable option Analog output SENT Output Optional (contact factory for details) FEATURES

More information

OTEB-CO-B EDFA WITHOUT SNMP INSTRUCTION MANUAL

OTEB-CO-B EDFA WITHOUT SNMP INSTRUCTION MANUAL OTEB-CO-B EDFA WITHOUT SNMP INSTRUCTION MANUAL Phone: (209) 586-022 (800) 545-022 Fax: (209) 586-026 E-Mail: salessupport@olsontech.com www.olsontech.com OTEB-CO-B (No SNMP) Rev. X7 /7/200 SAFETY WARNINGS

More information

IF-L/RF Protection Switch

IF-L/RF Protection Switch Instruction Manual Model 1582-1152 IF-L/RF Protection Switch August 2014, Rev. 0 CH1 HISTORY ALARM LINE HISTORY RESET AUTO MANUAL SELECT CH2 HISTORY ALARM LINE RESET MANUAL REMOTE AUTO ALARM PS1 PS2 MODEL

More information

Miniature Infrared Temperature Sensors with Optional Touch Screen Display. PSC-SSS-PM with touch screen display (-CRT version)

Miniature Infrared Temperature Sensors with Optional Touch Screen Display. PSC-SSS-PM with touch screen display (-CRT version) PSC-SSS-PM Series Miniature Infrared Temperature Sensors with Optional Touch Screen Display PSC-SSS-PM with touch screen display (- version) FEATURES Miniature sensing head and configurable electronics

More information

S304 and S305 Dust Emission Monitors. User Manual. Distributor

S304 and S305 Dust Emission Monitors. User Manual. Distributor S304 and S305 Dust Emission Monitors User Manual Distributor Version 6.4 30/5/2012 Table of Contents 1. INTRODUCTION... 3 1.1 Safety... 3 1.2 Product overview... 4 1.3 Principle of operation... 4 2. INSTALLATION...

More information

OilSET-1000 (12 VDC)

OilSET-1000 (12 VDC) Labkotec Oy Myllyhaantie 6 FI-33960 PIRKKALA FINLAND Tel: +358 29 006 260 Fax: +358 29 006 1260 Internet: www.labkotec.fi 20.03.2009 1/11 OilSET-1000 (12 VDC) Oil Separator Alarm Device Copyright 2009

More information

Engineering Guideline. pac- Carriers Type Universal

Engineering Guideline. pac- Carriers Type Universal Engineering Guideline pac- Carriers Type 9195 Universal Integration of conventional process automation interfaces pac- Carrier The pac- Carrier reflects the intention of R. STAHL to provide state-of-the-art

More information

CONDITION MONITORING BASED ON FMECA: A CASE STUDY OF SENSORS SPECIFICATIONS FOR MARITIME

CONDITION MONITORING BASED ON FMECA: A CASE STUDY OF SENSORS SPECIFICATIONS FOR MARITIME CONDITION MONITORING BASED ON FMECA: A CASE STUDY OF SENSORS SPECIFICATIONS FOR MARITIME Shan Guan, Materials Technology Development DNV GL (USA) Dublin, OH 43017 Telephone: (614) 397-1062 shan.guan@dnvgl.com

More information

Class 1 laser beam sensor safe for your eyes

Class 1 laser beam sensor safe for your eyes 1129 PHOTO PHOTO PARTICUR Sensor SERIES Related Information General terms and conditions... F-3 About laser beam... P.193~ guide... P.121~ General precautions... P.19 Conforming to FDA regulations (-11

More information

VPS3 Installation Manual

VPS3 Installation Manual 1-512-756-1678 VPS3 Installation Manual VPS3 Viewer (Local Unit) VPS3 Sender (Remote Unit) Content Introduction...2 Features...2 Packing Checklist...2 Patents...2 Limited Warranty...2 Overall Certificate...3

More information

Class 1 laser beam sensor safe for your eyes

Class 1 laser beam sensor safe for your eyes 113 Sensor SERIES Related Information General terms and conditions... F-7 About laser beam... P.199~ Sensor selection guide... P.1~ General precautions... P.11 PHOTO PHOTO PARTICUR MEASURE ITY panasonic.net/id/pidsx/global

More information

XUM0APSAM8 photo-electric sensor - XUM - multi - Sn 0..10m VDC - M8

XUM0APSAM8 photo-electric sensor - XUM - multi - Sn 0..10m VDC - M8 Characteristics photo-electric sensor - XUM - multi - Sn 0..10m - 12..24VDC - M8 Main Range of product Series name Electronic sensor type Sensor name Sensor design Detection system Material Type of output

More information

Advanced Autoclave Controller with Recording + 4 Channel Mapping + Pressure Indication with PC Software & Printer Module

Advanced Autoclave Controller with Recording + 4 Channel Mapping + Pressure Indication with PC Software & Printer Module Clavex Plus Advanced Autoclave Controller with Recording + 4 Channel Mapping + Pressure Indication with PC Software & Printer Module PC Software Controller with Graphic Display Printer Module Features

More information

OPERATION MANUAL MODEL 4610 ACCELEROMETER

OPERATION MANUAL MODEL 4610 ACCELEROMETER OPERATION MANUAL MODEL 4610 ACCELEROMETER TE CONNECTIVITY SENSORS///MODEL 4610 ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year

More information

CONsOlIDATOR 4 & 8. MulTI- C h ANNEl CONTROllERs. ConsoliDator 4 Model PD940 ConsoliDator 4 Features. ConsoliDator 8 Features.

CONsOlIDATOR 4 & 8. MulTI- C h ANNEl CONTROllERs. ConsoliDator 4 Model PD940 ConsoliDator 4 Features. ConsoliDator 8 Features. CONsOlIDATOR 4 & 8 MulTI- C h ANNEl CONTROllERs ConsoliDator 4 Model PD940 ConsoliDator 4 Features Four 4-20 Four 4-20 Outputs ConsoliDator 8 Features Eight 4-20 Two 4-20 Outputs Common Features Four Pulse

More information

RTD TEMPERATURE SENSING SYSTEM

RTD TEMPERATURE SENSING SYSTEM General Overview RTD TEMPERATURE SENSING SYSTEM The Prime Technology RTD Temperature System 9219-00-0002 is a three-channel temperature measuring system that utilizes two RTD Temperature Sensor inputs

More information

Installation Instructions CS3 Three Phase Solid State Relay

Installation Instructions CS3 Three Phase Solid State Relay Installation Instructions CS3 Three Phase Solid State elay 1 PK522-3 0037-75550 March 2018 Important Safeguards HIGH VOLTAGE is used in the operation of this equipment; DEATH ON CONTACT may result if personnel

More information

Vibration tests on a TNAML Luminaire

Vibration tests on a TNAML Luminaire Sebert Trillingstechniek B.V. Report M13.001-P13.001 rev.01 Date 26 august 2013 Vibration tests on a TNAML Luminaire Client Technor Benelux B.V. Veersteeg 15 4212 LR Spijk The Netherlands Contact Person

More information

UDC 700 Universal Digital Controllers and Indicator Specifications

UDC 700 Universal Digital Controllers and Indicator Specifications UDC 700 Universal Digital Controllers and Indicator Specifications 51-52-03-28 August 2002 Overview The UDC 700 is a 1/32 DIN (49 x 25 mm) controller which combines a high degree of technology and quality

More information

OVEN INDUSTRIES, INC.

OVEN INDUSTRIES, INC. OVEN INDUSTRIES, INC. OPERATING MANUAL Model 5C7-252 TEMPERATURE CONTROLLER With PLC Inputs Introduction Thank you for purchasing our controller. The Model 5C7-252 is an exceptionally versatile unit and

More information

DGC-1000 DIGITAL GENSET CONTROLLER

DGC-1000 DIGITAL GENSET CONTROLLER DGC-1000 DIGITAL GENSET CONTROLLER Basler Electric s Digital Genset Controller (DGC-1000) offers a low cost microprocessor based integrated alternative for small to medium sized genset control and monitoring.

More information

Table of Contents. Page Quick Set-up Instructions 1. Theory of Operation 2. Specifications 3. TM 1003W Controls and Connections 4

Table of Contents. Page Quick Set-up Instructions 1. Theory of Operation 2. Specifications 3. TM 1003W Controls and Connections 4 Table of Contents Page Quick Set-up Instructions 1 Theory of Operation 2 Specifications 3 TM 1003W Controls and Connections 4 1. Power Source Connector 5 2. Alarm Output Connector 5 3. Variation Detection

More information

Temperature Controllers

Temperature Controllers Model TEC-4100 1/4 DIN Model TEC-4100 1/4 DIN Temperature Controller Ordering Code: Power Input BOX 1 4 = 90-250 VAC 5 = 11-26 VAC / VDC TEC-4100- Configurable for 4 Programmable Outputs and NEMA 4X/IP65

More information

Model HL-Z. High Line Wet/Wet Differential Pressure Transducer DESCRIPTION FEATURES POTENTIAL APPLICATIONS

Model HL-Z. High Line Wet/Wet Differential Pressure Transducer DESCRIPTION FEATURES POTENTIAL APPLICATIONS High Line Wet/Wet Differential Pressure Transducer DESCRIPTION The High Line Wet/Wet Differential Pressure Model HL-Z is designed to accept extreme line pressures of up to 5000 psi.* This unique design

More information

GMS-10 RVS Series. Oxygen Sensors Accurate oxygen measurement WARNING WARNING DESCRIPTION TYPICAL APPLICATIONS FEATURES MISUSE OF DOCUMENTATION

GMS-10 RVS Series. Oxygen Sensors Accurate oxygen measurement WARNING WARNING DESCRIPTION TYPICAL APPLICATIONS FEATURES MISUSE OF DOCUMENTATION GMS-10 RVS Series Oxygen Sensors Accurate oxygen measurement DESCRIPTION The GMS-10 is a high-accuracy oxygen sensor suitable for many applications. Originally developed for boiler applications, the product

More information

SET-2000 Oil/Sludge. Alarm Device for Oil Separators. Installation and Operating Instructions

SET-2000 Oil/Sludge. Alarm Device for Oil Separators. Installation and Operating Instructions SET-000 Oil/Sludge Alarm Device for Oil Separators Copyright 007 Labkotec Oy We reserve the right for changes without notice TABLE OF CONTENTS GENERAL... INSTALLATION... 4. SET-000 Oil/Sludge Control Unit...

More information

MAJOR CONCERN on your GENERATORS?

MAJOR CONCERN on your GENERATORS? Is STATOR WINDING CONDITION a MAJOR CONCERN on your GENERATORS? Early detection of winding vibration is a key component in preventing forced outages caused by insulation system failures. Our Fiber Optic

More information

COMPACT FLAME CONTROLLER CFC 200 (Formerly 8.XX)

COMPACT FLAME CONTROLLER CFC 200 (Formerly 8.XX) COMPACT FLAME CONTROLLER CFC 200 (Formerly 8.XX) TECHNICAL DESCRIPTION EDITION: TB CFC200-REV3-2015-04-07 IMPORTANT: Please note, that all mounting and wiring as well as all changing or adjustment at the

More information

Class 1 laser beam sensor safe for your eyes

Class 1 laser beam sensor safe for your eyes 13 Sensor SERIES Related Information General terms and conditions... F-17 About laser beam... P.13~ Sensor selection guide... P.967~ General precautions... P.1 PHOTO PHOTO Conforming to EMC Directive Conforming

More information

ATSTORM v2. The sensor with FCES technology is connected to the interface with a communication cable.

ATSTORM v2. The sensor with FCES technology is connected to the interface with a communication cable. ATSTORM v2 ATSTORM v2 is a storm detector that measures the environmental electric field. It is fully automatic, without mobile parts, robust and highly reliable The storm detector ATSTORM v2 basic configuration

More information

RPS/DPS High Accuracy Resonant Pressure Sensor. GE Measurement & Control. Features:

RPS/DPS High Accuracy Resonant Pressure Sensor. GE Measurement & Control. Features: GE Measurement & Control RPS/DPS 8100 High Accuracy Resonant Pressure Sensor For over 35 years, Druck has manufactured precision pressure sensors with a capability to meet critical applications in industrial,

More information

Model 1062 Environment Monitor

Model 1062 Environment Monitor Model 1062 Environment Monitor Continuously Monitors Environment Temperature Humidity Barometric Pressure Line Voltage Line Frequency Applications Manufacturing The 1062A Environment Monitor will ensure

More information

DP86 Constant Voltage with Fitting

DP86 Constant Voltage with Fitting SPECIFICATIONS 316L SS Wet/Wet Differential Low Pressure 0 100mV Output The DP86 constant voltage with fitting differential pressure sensor is a double-sided, media compatible, piezoresistive silicon pressure

More information

SET-2000 Hi Level/Oil

SET-2000 Hi Level/Oil Labkotec Oy Labkotie 1 FI-36240 KANGASALA FINLAND Tel: + 358 29 006 260 Fax: + 358 29 006 1260 13.03.2008 Internet: www.labkotec.fi Alarm Device for Oil Separators Copyright 2008 Labkotec Oy We reserve

More information

Monitoring Pump Performance with Vibration. Mitchell Stansloski, PhD, PE

Monitoring Pump Performance with Vibration. Mitchell Stansloski, PhD, PE Monitoring Pump Performance with Vibration Mitchell Stansloski, PhD, PE Centrifugal Pumps Centrifugal pumps Centrifugal Pumps (Radial Flow Pumps): A pump using radial flow impellers that give their energy

More information

DSP EC Pro. Advanced, Digital Gamma-Ray Spectrometer for HPGe Detector Systems

DSP EC Pro. Advanced, Digital Gamma-Ray Spectrometer for HPGe Detector Systems Advanced, Digital Gamma-Ray Spectrometer for HPGe Detector Systems DSPEC Pro: Advancing the Art of Digital Gamma-Ray Spectroscopy The immense versatility of DSPEC Pro, brought about by the number of unique

More information

SENTINEL A - Fault Passage Indicator

SENTINEL A - Fault Passage Indicator SENTINEL A - Fault Passage Indicator AMPEREMETRIC FAULT PASSAGE INDICATORS FOR OVERHEAD MV NETWORKS Installed on poles of overhead lines, the Overhead-Sentinel-A range allows locating the fault arisen

More information

2-wire Passive Intelligent Loop (LED) Display Meter

2-wire Passive Intelligent Loop (LED) Display Meter Features Two-wire passive intelligent loop current (LED) digital meter 2-wire Passive Intelligent Loop (LED) Display Meter Embedded 2-wire Passive Programmable 4-20mA Loop (Four Digits LED) Display Meter

More information

ISOMETER IRDH275BM-7 with coupling device AGH675-7 and AGH675-7MV15

ISOMETER IRDH275BM-7 with coupling device AGH675-7 and AGH675-7MV15 with coupling device AGH675-7 and AGH675-7MV15 Device combination for insulation monitoring in unearthed AC, AC/DC and DC power systems (IT systems) IRDH275BM-7_D00123_03_D_XXEN/01.2017 with coupling device

More information

Multi-Gas-Controller MGC2

Multi-Gas-Controller MGC2 Page 1 Aug. 2018 Gas measuring, monitoring and warning controller based on state-of-the-art micro-technology for continuous monitoring of the ambient air to detect toxic and combustible gases, refrigerants

More information

PureGain TM 2600 Variable Gain EDFA for Metropolitan Networks

PureGain TM 2600 Variable Gain EDFA for Metropolitan Networks FEATURES Variable Gain Amplifier with or without Mid-Stage Fully Integrated Control Electronics with State-of-the-Art Transient Suppression Control Three Standard Configurations Mk I: 17 dbm VGA (Variable

More information

Call stations and extensions

Call stations and extensions Novigo Call stations and extensions PT2001-A1, PT2002-A1, PT2008-A1, PT2009-A1, PTO2001-A1, PTO2002-A1, PTO2003-A1, PTO2004-A1, PTO2005-A1, PTO2006-A1, PTO2008-A1 EN 54-16-certified alarm and business

More information

Module Features are-configurable, no module jumpers to set

Module Features are-configurable, no module jumpers to set December 2011 PACSystems* RX3i Isolated Thermocouple Input Module, 6 Channels, IC695ALG306 Isolated Thermocouple Input Module, 12 Channels, IC695ALG312 Isolated Thermocouple Input module IC695ALG306 provides

More information

DIGITAL CENTRALIZED Section NANOMASKIT

DIGITAL CENTRALIZED Section NANOMASKIT Page 1 of 8 1 GENERAL 1.1 RELATED SECTIONS 1.2 REFERENCES.1 Section 16010 Electrical General Requirements.2 Section 16120 Wire and Cable.3 Section 16993 Electrical Starting and Testing General Requirements

More information

XUX0AKSAM12 photo-electric sensor - XUX - multi - Sn 0..40m VDC - M12

XUX0AKSAM12 photo-electric sensor - XUX - multi - Sn 0..40m VDC - M12 Characteristics photo-electric sensor - XUX - multi - Sn 0..40m - 12..24VDC - M12 Complementary Enclosure material Lens material Maximum sensing distance Output type Add on output Status LED [Us] rated

More information

MHC Series Sensors

MHC Series Sensors MHC - 4000 Series Sensors Smart Sensors for Permanent Installation Shaft Speeds above 30 RPM & 0.25-60 RPM Sigma Sensors for Intermittant Operation Kittiwake Holroyd Ltd A Kittiwake Group Company The MHC

More information

IT system floor-standing distribution

IT system floor-standing distribution IT system floor-standing distribution cabinet series -IPS-F/EDS for supplying power to medical locations in accordance with IEC 60364-7-710 and featuring a built-in insulation fault location system IT

More information

PRELIMINARY EDITION

PRELIMINARY EDITION 3 131 PRELIMINARY EDITION 14.01.2003 Synco 700 Heating Controllers Heating controller for medium-size and large buildings. The is used as a heating circuit or primary controller. The controller is supplied

More information