Fiber Optics. VIS / NIR Multimode, Feedthroughs. Ultrahigh Vacuum CF Flange Feedthrough. 4 x 1 CF Flange Feedthrough
|
|
|
- Clemence Snow
- 5 years ago
- Views:
Transcription
1 VIS / NIR Multimode, Feedthroughs CCU-GLSS Ultrahigh Vacuum CF Flange Feedthrough CF 275 CF , UHV CF Flange 0.85 feedthrough circle Premium SM 905 Number Fiber Connector CF Flange Model Part Unit 1 100µm IR SM 133 CF 1.33 FO1IR µm IR SM 275 CF 2.73 FO1IR µm IR SM 275 CF 2.73 FO1IR µm IR SM 133 CF 1.33 FO2IR µm IR SM 275 CF 2.73 FO2IR µm IR SM 275 CF 2.73 FO2IR µm IR SM 133 CF 1.33 FO4IR µm IR SM 275 CF 2.73 FO4IR µm IR SM 275 CF 2.73 FO4IR µm IR SM 133 CF 1.33 FO6IR µm IR SM 275 CF 2.73 FO6IR µm IR SM 275 CF 2.73 FO6IR µm IR SM 133 CF 1.33 FO10IR µm IR SM 275 CF 2.73 FO10IR µm IR SM 275 CF 2.73 FO10IR , UHV CF Flange , UHV CF Flange Ultrahigh Vacuum 4 x 1 CF Flange Feedthrough radius dia, min. dia , UHV CF Flange 4 x 1 Feedthrough connector attached 3.85 connector attached Section - Number Fiber Connector CF Flange Model Part Unit 4x1 100µm IR SM 275 CF 2.73 FO1IR x1 200µm IR SM 275 CF 2.73 FO2IR x1 400µm IR SM 275 CF 2.73 FO4IR x1 600µm IR SM 275 CF 2.73 FO6IR
2 CCU-GLSS VIS / NIR Multimode, Feedthroughs ISO Flange Feedthrough NW16 KF , HV ISO KF Flange NW40 KF 0.85 feedthrough circle Premium SM 905 Number Fiber Connector ISO Flange Model Part Unit , HV ISO KF Flange , HV ISO KF Flange 1 100µm IR SM NW16 KF 1.18 FO1IR-K µm IR SM NW40 KF 2.16 FO1IR-K µm IR SM NW40 KF 2.16 FO1IR-2-K µm IR SM NW16 KF 1.18 FO2IR-K µm IR SM NW40 KF 2.16 FO2IR-K µm IR SM NW40 KF 2.16 FO2IR-2-K µm IR SM NW16 KF 1.18 FO4IR-K µm IR SM NW40 KF 2.16 FO4IR-K µm IR SM NW40 KF 2.16 FO4IR-2-K µm IR SM NW16 KF 1.18 FO6IR-K µm IR SM NW40 KF 2.16 FO6IR-K µm IR SM NW40 KF 2.16 FO6IR-2-K µm IR SM NW16 KF 1.18 FO10IR-K µm IR SM NW40 KF 2.16 FO10IR-K µm IR SM NW40 KF 2.16 FO10IR-2-K x 1 ISO Flange Feedthrough radius dia, min , HV ISO KF Flange 4 x 1 Feedthrough dia connector attached connector attached Section - Number Fiber Connector ISO Flange Model Part Unit 4x1 100µm IR SM NW40 KF 2.16 FO1IR-4-K x1 200µm IR SM NW40 KF 2.16 FO2IR-4-K x1 400µm IR SM NW40 KF 2.16 FO4IR-4-K x1 600µm IR SM NW40 KF 2.16 FO6IR-4-K Telephone
3 VIS / NIR Multimode, Feedthroughs CCU-GLSS Bolt style Feedthrough both sides 0.30 Vent hole 1.06 max O-ring , HV Bolt Feedthrough vacuum side ± dia mounting hole 0.88 dia Chamber wall, 1.06 thick, max. 32 RMS finish, 0.50 OD Premium SM 905 Number Fiber Connector Bolt Overall Model Part Unit F thrus VIS/NIR Type Thread Length Number Number $ 1 100µm IR SM 3/ BOLT-1IR µm IR SM 3/ BOLT-2IR µm IR SM 3/ BOLT-4IR µm IR SM 3/ BOLT-6IR µm IR SM 3/ BOLT-10IR VIS / NIR or Ultra-low-OH Fiber, nm* Provides the lowest possible internal light attenuation. Useful for VIS or VIS / NIR applications requiring extremely long fiber lengths. 0.7 Optical Fiber Numerical perture Numerical aperture is a relative measurement of how much light a fiber can gather. Numerical aperture is expressed as a result of Snell s law: TTENUTION (db/m) N = (N 12 - N 22 ) 1/2 = Nsinø max ll ccu-glass multimode fibers have a numerical aperture of 0.22, which equals a whole acceptance angle of Half cceptance ngle, ø Whole cceptance ngle, 2ø WVELENGTH (nm) * Some absorption occurs at 1400nm. In-ir
4 CCU-GLSS VIS / NIR Multimode, UHVPatch Cable ssemblies VIS / NIR Multimode Fiber Optic Cable ssemblies Connector to Connector UHV fiber optic cable assemblies are fitted with premium SM 905 connectors on both ends of a non-jacketed fiber optic fiber. N = 0.22, Step-Index. Connector to Cable UHV fiber optic cable assemblies are fitted with a premium SM 905 connector on one end and a bare polished fiber on the other. N = 0.22, Step-Index. Note: In-Vacuum cables require a coupler to mate with corresponding feedthroughs , 600µm IR In-Vacuum Cable Operating: -65 C to 200 C, Intermittent 300 C Service: UHV 1 x Torr Core & Operating Model Part Unit Length Wavelength Buffer Type Type (inches) Range Number Number $ , 1000µm IR In-Vacuum Cable Connector to Connector 100µm IR nm Polyimide Step-Index IRV1-19SM µm IR nm Polyimide Step-Index IRV1-39SM µm IR nm Polyimide Step-Index IRV2-19SM µm IR nm Polyimide Step-Index IRV2-39SM µm IR nm Polyimide Step-Index IRV4-19SM µm IR nm Polyimide Step-Index IRV4-39SM µm IR nm Polyimide Step-Index IRV6-19SM µm IR nm Polyimide Step-Index IRV6-39SM µm IR nm luminum Step-Index IRV10-19SM µm IR nm luminum Step-Index IRV10-39SM , In-Vacuum Coupler with vent hole Connector to Cable 100µm IR nm Polyimide Step-Index IRV1-19SM µm IR nm Polyimide Step-Index IRV1-39SM µm IR nm Polyimide Step-Index IRV2-19SM µm IR nm Polyimide Step-Index IRV2-39SM µm IR nm Polyimide Step-Index IRV4-19SM µm IR nm Polyimide Step-Index IRV4-39SM µm IR nm Polyimide Step-Index IRV6-19SM µm IR nm Polyimide Step-Index IRV6-39SM µm IR nm luminum Step-Index IRV10-19SM µm IR nm luminum Step-Index IRV10-39SM In-Vacuum coupler with vent hole FOVENT-C , 600µm IR with PEEK Braid Jacketing Cable ssembly Jacketing Options Jacketing 19" price 39" price PEEK braid jacketing append to Part Number Stainless steel braid jacketing append to Part Number Silver plated copper braid jacketing append to Part Number These are sold as additions to the above cable assemblies and are added at the factory only. is added to Unit. For example, Part Number would have a price of $179. Part Number would have a price of $ , 600µm IR with Stainless Steel Braid Jacketing Telephone
5 VIS / NIR Multimode,ir-servicePatch Cable ssemblies CCU-GLSS ir-service Multimode Fiber Optic Cable ssemblies ir-service Cable assemblies are fitted with premium SM connectors on both ends of a red PVC jacketed fiber optic fiber. N = 0.22, Step-Index. Note: ir-service cables require a coupler to mate with corresponding feedthroughs. Operating: 80 C Service: ir tmos. Core & Operating Model Part Unit Length Wavelength Jacketing Type Type (inches) Range Number Number $ ir-service Cable 100µm IR nm PVC Step-Index IR1-79SM µm IR nm PVC Step-Index IR2-79SM µm IR nm PVC Step-Index IR4-79SM µm IR nm PVC Step-Index IR6-79SM µm IR nm PVC Step-Index IR10-79SM ir side coupler without vent hole FO-C , 600µm IR ir-service Cable , ir side Coupler without vent hole Cable Rack Electronic and fiber optic cable rack is great for hanging wires and cables. This keeps cables organized and off of already crowded workstations. Cable Rack Narrow Slot Cable Rack CR-NS Wide Slot Cable Rack CR-WS , Cable Rack
4120 Fire Alarm Network Reference
4120 Fire Alarm Network Reference Features Autocall 4120 Fire Alarm Network communications are available for wired or fiber optic connections Wired communications are available on Network Interface Cards
UHV Flow Cryostats. Ultra High Vacuum Flow cry stats CRYO INDUSTRIES
UHV Flow Cryostats Ultra High Vacuum Flow cry stats INDUSTRIES Ultra High Vacuum Flow Cryostats: Models RC-102 and RC-110 Cryo offers Models RC-102 and RC-110 Ultra High Vacuum continous flow cryostats,
Diamond Windows & MCP Detectors for Synchrotron Applications
Torr Scientific Ltd. Specialists in UHV, Optical and X-ray Components Diamond Windows & MCP Detectors for Synchrotron Applications www.torrscientific.co.uk Torr Scientific Ltd. Specialists in UHV, Optical
Industrial Cable Support HALOGEN-FREE - FIRE RETARDANT - OPTICAL FIBER DUCTING
INTRODUCTION Duct+Lid () TC1279-21X Ducting Warren & Brown Technologies Optical Fibre Ducting System is designed to ensure network integrity and to satisfy the requirements for Optical Fibre stress relief:
818 Series Low-Power Detectors
1090 818 Series Low-Power Detectors Newport uses the highest quality semiconductor detector materials available in our 818 Series Low-Power Detectors. In addition, each detector arrives with a complete
Low-Power Detectors. Key Features. 818 Series. Power levels from pw to 2W. Wavelengths from 190 nm to 1800 nm. Proprietary detector optics
818 Series TUTORIAL SPECTRUM ANALYZER HIGH-POWER DETECTORS INTEGRATING SPHERES LOW-POWER DETECTORS POWER & ENERGY METERS Key Features Power levels from pw to 2W Wavelengths from 190 nm to 1800 nm Proprietary
HIGH POWER FIBER OPTIC PATCHCORDS
HIGH POWER FIBER OPTIC PATCHCORDS USA PATENT #: 7431513 Features: Unique connector design minimizes thermal damage Patented connector designs for precise fiber to fiber coupling Able to withstand temperatures
818 Series. Low-Power Detectors ABSOLUTE SPECTRAL RESPONSIVITY (A/W)
132 P hotonics LASER DIODE TESTING FIBER OPTIC TEST Key Features Power levels from pw to 2W Wavelengths from 190 1800 nm Proprietary detector optics Patented, matched OD3 attenuator NIST/NPL-traceable
OPTICAL FIBER SOLUTIONS
www.ofsoptics.com/medical OPTICAL FIBER SOLUTIONS FOR YOUR MEDICAL DEVICE ISO 9001 and 13485 Certified FDA Good Manufacturing Practices USP Class VI and ISO10993 for Biocompatibility Low Bioburden Assembly
HELKAMA. Optical Fibre Cables
1 Contents Optical fibres and their characteristics Cable constructions Cable tests Installation, jointing and terminating Manufacturing (pictures) 2 Multimode Fibre (GK) Attenuation and Bandwidth Fibre
LM-80V , h V LM-30V h V
Smart QuadSensors Beampositioning with Laserpad, FieldMaster, FieldMaster-GS and Ultima LabMaster Catalog Name Power Aperture Notes Spectral Accuracy For Single Shot Use with Sensor Number (mm) Range (±
PUMP AND SIGNAL COMBINERS
Pump and Signal Combiners For Fiber Laser and Amplifier Design A Furukawa Company www.ofsoptics.com PUMP AND SIGNAL COMBINERS for Fiber Laser and Amplifier Design Multimode Single-mode Polarization-Maintaining
Motion Control and Precision Positioning in Vacuum Environments
Motion Control and Precision Positioning in Vacuum Environments PI micos GmbH, Freiburger Strasse 30, 79427 Eschbach, Germany Page 1 of 8 1 Introduction Vacuum applications are of growing importance due
Product Specification Qualification Test Report
PS 88 / DMI PC SM / 6/5 DIAMOND Test & Calibration Laboratory STS 333 / SCS 11 Product Specification Qualification Test Report DMI PC SM DIAMOND SA Via dei Patrizi 5 CH-6616 LOSONE Tel. +41 91 785 45 45
Clearlite Photonic Fibers
Clearlite Photonic Fibers Fiber Name Operating Wavelength MFD at Operating Wavelength Beat Length at Operating WL Clad/Coating Diameter Order by Part Number TruePhase 980 Micro TruePhase 980 400 TruePhase
Sumitomo Fiber Specification SE-6** Non-Zero Dispersion Shifted Single-Mode Fiber. PureGuide SM Optical Fiber, TIA Type IVd. Issued: November 2003
Sumitomo Fiber Specification SE-6** Non-Zero Dispersion Shifted Single-Mode Fiber PureGuide SM Optical Fiber, TIA Type IVd Issued: November 2003 78 Alexander Drive, Research Triangle Park, NC 27709 Phone
Sumitomo Fiber Specification SE-9** Non-Zero Dispersion Shifted (NZDF) Zero Water Peak Large Effective Area Single Mode Fiber
Sumitomo Fiber Specification SE-9** Non-Zero Dispersion Shifted (NZDF) Zero Water Peak Large Effective Area Single Mode Fiber PureGuide -LA SM Optical Fiber, TIA Type IVd ITU G.655 C and D Compliant Issued:
MT-RJ Optical Fiber System Field Testing
MT-RJ Optical Fiber System Field Testing Table of Contents INTRODUCTION... 3 TEST JUMPERS... 4 LAUNCH CONDITIONS... 4 MT-RJ TEST KITS... 5 MT-RJ SYSTEM TESTING: Fixed transmit and receive (SC or ST-style)
Fibre Optic Basics FIA Summer Seminar 2014
Fibre Optic Basics FIA Summer Seminar 2014 Andrew Cole Theory Basics Characteristics of Light What is Light? An electromagnetic wave, which like other waves, has a frequency (f), velocity (v) and a wavelength
Fibre Specification Standards
Fibre Specification Standards User Manual The most important thing we build is trust Cobham Wireless - Coverage Table of Contents 1. Single-mode Fibre to ITU-T Recommendation G.652 3 2. SC/APC Mated Pair
Data sheet OpDAT mini breakout cable 24x1 OM4 - bend insensitive
Page 1/8 Illustrations Principle diagram See enlarged drawings at the end of document Product specification mini-breakout installation cable U-VQ(ZN)H laser-optimized, bend insensitive fiber UV-resistant,
M700-Series Multifunction OTDR
M700-Series Multifunction OTDR Test, Troubleshoot and Document Single-mode and Multimode Fiber Networks Test Modes Full Auto OTDR Normal (point-to-point) fiber cable construction testing and fault location
Fiber Optic Products Catalog
Fiber Optic Products Catalog No epoxy, no polish, no crimp Two fibers in one ferrule MT-RJ Patch Panel Jack packages include: 6 MT-RJ Jacks 2 Actuator Tools 1 Fiber Guide 1 Icon Wheel Bend Limiting Boots
2016 Ideal Vacuum (505) V 1.1
Doc. Ref. IdealCUBE-6x121416 pg. 1 User Manual Table of Contents 6x6x6 Vacuum Cube Specification Sheet...3 Assembling a Vacuum Cube system...3 Vacuum Cube Frame...3 Plate Installation...4 Mounting for
Fiber Optic Distribution Cables (6-144 Fibers)
900um Buffered Aramid Yarn Strength Members Outer 6 or 12 Subunit Central Strength Member Outer Ripcord Single Unit Cable 6-24 Multi-Unit Cable 24-144 Description: AMP NETCONNECT distribution cables are
The Optical Scattering Calibration System at SNO+ IOP 2015
The Optical Scattering Calibration System at SNO+ KRISH MAJUMDAR IOP 2015 Contents Introduction SNO+ Why and how to monitor optical scattering Hardware Overview Laser Heads and Laser Head Control Laser
VTI Services Technical Bulletin (TB) OTDR Measurement of Installed Optical Fibre Cabling Permanent Links and Links
VTI Services Technical Bulletin (TB) OTDR Measurement of Installed Optical Fibre Cabling Permanent Links and Links TB Number 004 This bulletin is supplied for information only and is intended to provide
Apr06 Rev A
Qualification Test Report LC, Multimode, One-Piece Housing, Fiber Optic Connector 501-628 03Apr06 Rev A 1. INTRODUCTION 1.1. Purpose 1.2. Scope Testing was performed on Tyco Electronics LC multimode, one-piece
Simplex ES Network. ES Net Network Applications, Communications, Options and Specifications. ES Net features. UL, ULC Listed*
Simplex ES Network UL, ULC Listed* ES Net features ES Network (ES Net) is a high bandwidth (100 Mbps) IP based fire alarm network that supports up to 99 nodes and uses industry standard network technology
TE CONNECTIVITY <fiber count> <fiber type> <flame rating> MM/YY SO<shop order number> XXXXX FEET
Optic Backbone Distribution Cables 900um Buffered Aramid Yarn Strength Members Outer 6 or 12 Subunit Central Strength Member Outer Ripcord Single Unit Cable 6-24 Multi-Unit Cable 24-144 Description: TE
Cartridge. SORB-AC Cartridge Pumps MK5 Series. Pump Body. Heater. Thermocouple. Flange. Electrical Connector
SORB-AC Pumps MK5 Series The manufacturing companies are ISO9001 certified, the Asian and Italian companies are website at: NEW SORB AC PUMPS_Layout 1 28/07/2011 10.57 Pagina 1 SORB-AC Pumps MK5 Series
Data sheet OpDAT universal cable 1x24 OM4 - bend insensitive
Illustrations Principle diagram Page 1/7 Product specification installation cable U-DQ(ZN)BH universal fiber optic cable for indoors/outdoors with central or stranded loose tube bend insensitive fiber
SECTION COMMUNICATIONS PATCH CORDS, STATION CORDS AND CROSS CONNECT WIRE
SECTION 27 16 19 COMMUNICATIONS PATCH CORDS, STATION CORDS AND CROSS CONNECT WIRE PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary
Optical Multitester 500 450 OTDR EMEA & APac Edition Issue 1 Page 1 of 10 Description The 450 OTDR is a PC based state-ofthe-art OTDR designed for field applications. It is a dedicated OTDR which offers
SORB-AC Cartridge Pumps MK5 Series
SORB-AC Cartridge Pumps MK5 Series we support your innovation SORB-AC Cartridge Pumps MK5 Series HIGHLIGHTS. General Features High pumping speed for all active gases Constant pumping speed in HV and UHV
Basic Professional Fiber Optic Installation
Basic Professional Fiber Optic Installation QUICK SUMMARY Length: 32 hours; or 40 hours with Fiber Optic Association CFOT certification Hands-on Activities: 40 activities, 70-75 % Text/Field Reference:
Hands-On Fiber Optics ISP/OSP - Advanced Combo- Tech
Hands-On Fiber Optics ISP/OSP - Advanced Combo- Tech Course Description This Hands-On 3-day course has been customized to provide technicians with a practical understanding of fiber optic theory and fiber
cooled, Non-heated ATH 1603 M, DN 200 CF-F, External drive electronics, Water cooled, Non-heated
ATH 1603 M, DN 200 CF-F, External drive electronics, Water ATH 1603 M, DN 200 CF-F, External drive electronics, Water ATH 1603 M, DN 200 CF-F, External drive electronics, Water Similar Image 5-axis magnetically
Data sheet OpDAT breakout cable 12x1 OM4 - bend insensitive, class Dca s1 d1 a1
Page 1/9 Illustrations Principle diagram See enlarged drawings at the end of document Product specification connection cable I-V(ZN)HH breakout cable for direct connector termination for indoors and outdoors
STANDARD FOR INDOOR-OUTDOOR OPTICAL FIBER CABLE
STANDARD FOR INDOOR-OUTDOOR OPTICAL FIBER CABLE Publication # ICEA S-104-696 Second Edition March 2013 2013 by ICEA INSULATED CABLE ENGINEERS ASSOCIATION, Inc. STANDARD FOR INDOOR-OUTDOOR OPTICAL FIBER
Qualification Test Report LightCrimp* Plus Singlemode and Multimode LC Connector (Field Installable)
Qualification Test Report LightCrimp* Plus Singlemode and Multimode LC Connector (Field Installable) 501-586 26Feb09 Rev F 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics LightCrimp*
Special Provision No. 683S28 December 2017
FIBRE OPTIC COMMUNICATION CABLES, AERIAL ON MESSENGER CABLE - Item No. FIBRE OPTIC COMMUNICATION CABLES, AERIAL ON MESSENGER CABLE (TEMPORARY) - Item No. Special Provision No. 683S28 December 2017 1. SCOPE
Fire Control Panels. Multiple Signal Fiber Optic Modems and Accessories for Panel and Remote Mounting. Features. Operation.
UL, ULC Approved* Fire Control Panels Multiple Signal Fiber Optic Modems and Accessories for Panel and Remote Mounting Features Converts multiple fire alarm communications signals into a single fiber optic
M210 Multifunction Micro OTDR
Test, Troubleshoot and Document Single-mode and Multimode Fiber Networks Features 30 db dynamic range single-mode 16-hour battery life Remote display capable Touch and Test intuitive user interface New
Varian, Inc. Vacuum Technologies. Diffusion Pumps. Feature and Benefits Typical Applications Pump Models
Varian, Inc. Vacuum Technologies Diffusion Pumps Feature and Benefits 62-63 Typical Applications 64-65 Pump Models 66-89 Fluids 9-91 Baffles 92-94 Technical Notes 96-99 61 Diffusion Pumps Features and
M210 Multifunction Micro OTDR
Test, Troubleshoot and Document Single-mode and Multimode Fiber Networks Features 30 db dynamic range single-mode 16-hour battery life Remote display capable Touch and Test intuitive user interface New
Fibre (TIA) Field Test Specification
This document has been prepared to aid consultants or engineers in developing contractual specifications covering the testing of duplex fibre optic cabling installations. It is offered as a general guide.
Cryopumps, Cryogenics
Cryopumps, Cryogenics 182.01.02 Excerpt from the Product Section C12 Edition 2010 Contents General Applications and Accessories Cryopumps........................................ C12.03 Cryogenics........................................
Hands-On Fiber Optic ISP / OSP Combo-Tech Splicing, Termination & Testing
Hands-On Splicing, Termination & Testing BICSI CECs This course has been approved for CEC credits by BICSI. Please read below for a breakdown of the credits that we offer for this course. For more information
Applications and Accessories, Cryo Pumps
General Applications and Accessories, Cryo Pumps Cryo pumps Application UHV systems Beam tubes in particle accelerators Transfer chambers / Loadlock General research Evaporation coating systems Sputtering
Optical Time Domain Reflectometry (OTDR)
Experimental Optics Contact: Helena Kämmer (helena.kaemmer@uni-jena.de) Last edition: Helena Kämmer, January 2017 Optical Time Domain Reflectometry (OTDR) Contents 1 Overview 3 2 Safety issues 3 3 Theoretical
DWDM OTDR with Tunable Laser MTP-200-D100. Hand-held High Performance OTDR. Series
MTP-200-D100 Hand-held High Performance OTDR DWDM OTDR with Tunable Laser Series Multi-Function and High Performance OTDR Testing 96 C-band wavelengths Dynamic range up to 38dB Short zone: EDZ 1m, ADZ
Fiber Optics for Todays Industry Applications
Hands-On Fiber Optics for Todays Industry Applications (A Non-Telephone Company Course) Course Description This Hands-On course is designed to provide technicians with a practical understanding and Hands-On
Paper 1-IS-35 / A NEW UV SENSOR METHOD FOR SEWER RENOVATION Page 1
Page 1 Paper 3-B-01 / Cured in Place Pipeliners A New UV Sensor Method for Sewer Renovation Michael Roeling, Export Manager BKP Berolina Polyester GmbH & Co. KG, Velten, Germany Page 2 UV Curing of CIPP
Compact Laser MBE system
Compact Laser MBE system Model : PA-C-PLMBE Our design priority, easy-to-use,brings better controllability of film growth condition This system is designed to deposit thin films on a substrate
Instruments Designed for POF & Fibre Optic Cable Testing
XL fibertools Series Instruments Designed for POF & Fibre Optic Cable Testing The XL fibertools are designed for the professional to perform installation and maintenance measurements on both Plastic &
2-Stage 4 K Closed Cycle Refrigerator Systems
2-Stage 4 K Closed Cycle Refrigerator Systems Variable Temperature Closed Cycle Refrigerator Systems Cryo Industries manufactures closed cycle cryogenic workstations for a large variety of experimental
Service and maintenance manual FSTC-049
Service and maintenance manual FSTC-049, version 25-07-2014, Page 1/8 Service and maintenance manual FSTC-049 Introduction The FSTC-049 module is designed to hold one 210x68 mm flat sheet membrane for
M700-Series OTDRs. or (800) , (603)
Features M700 Compact QUAD OTDR M700 OTDR with DFS1 Digital FiberScope Integrated OPM and VFL (650 nm) Inspection capable with the DFS1 FiberScope Full Auto, Expert, and Real-Time OTDR test modes Automatic
Fiber Optic and CAT 5, 6, 7 and 8 Installer Premise Cabling
Hands-On Fiber Optic and CAT 5, 6, 7 and 8 Installer Premise Cabling Certification Course Description This Hands-On course is customized to give Technicians the confidence and skills to maintain Fiber
VacIon Plus 150. Outline Drawing. Technical Specifications. Dimensions: millimeters (inches) 6" O.D. CFF (NW100) (1.88) REF (14.
VacIon Plus 150 Outline Drawing 6" O.D. CFF (NW100) 47.80 (1.88) REF 100 (3.94) REF 170 (6.69) REF 272.50 (10.73) REF 244.50 (9.62) REF 362.80 (14.28) REF THREADING 1/2"-20 2B 205 (8.07) REF Dimensions:
2-Stage 4 K Closed Cycle Refrigerator Systems
CRYO 2-Stage 4 K Closed Cycle Refrigerator Systems Variable Temperature Closed Cycle Refrigerator Systems Cryo Industries manufactures closed cycle cryogenic workstations for a large variety of experimental
Fiber Optic Patch Cord and Pigtails
Fiber Optic Patch Cord and Pigtails Description The optical fiber patch cords are fitted at both ends with same connector types or different connector types. Our fiber optic patch cords are ultra reliable
Our photo detectors are offered for both power or energy measurements. Measure as low as a few femtojoules in energy or a few picowatts in power.
PHOTO DETECTORS BEAM DIAGNOSTICS SPECIAL PRODUCTS OEM DETECTORS THZ DETECTORS PHOTO DETECTORS HIGH POWER SOLUTIONS POWER DETECTORS ENERGY DETECTORS MONITORS PRESENTATION OVERVIEW OF THE DIFFERENT MODELS
Instruction Manual. B Issue B. next Pump Accessories
Instruction Manual B811-00-880 Issue B next Pump Accessories This page has been intentionally left blank. Contents Section Page 1 Introduction... 1 Contents gea/0086/06/10 1.1 Scope and definitions...
INTERNATIONAL TELECOMMUNICATION UNION SERIES L: CONSTRUCTION, INSTALLATION AND PROTECTION OF CABLES AND OTHER ELEMENTS OF OUTSIDE PLANT
INTERNATIONAL TELECOMMUNICATION UNION ITU-T L.36 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (10/98) SERIES L: CONSTRUCTION, INSTALLATION AND PROTECTION OF CABLES AND OTHER ELEMENTS OF OUTSIDE PLANT
Industrial Fiber Optic Cables, LSZH Corrugated Armored Cable, Fibers
Features and Benefits Corrugated armor Mechanical protection Low-smoke/zero-halogen (LSZH ) sheath Key life-safety benefit Meets cyclic impact and chemical resistance test Superior performance Tray-rated
Our photo detectors are offered for both power or energy measurements. Measure as low as a few femtojoules in energy or a few picowatts in power.
BEAM DIAGNOSTICS SPECIAL PRODUCTS OEM DETECTORS THZ DETECTORS PHOTO DETECTORS HIGH POWER SOLUTIONS POWER DETECTORS ENERGY DETECTORS MONITORS PRESENTATION OVERVIEW OF THE DIFFERENT MODELS Our photo detectors
Jan07 Rev B
Qualification Test Report 501-545 05Jan07 Rev B MT-RJ Patch Panel and Outlet Jacks (Standard, XG, SECURE and SECURE XG) 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics MT-RJ Jack,
M310 Enterprise OTDR. Designed for Enterprise Network Testing, Troubleshooting and Documentation. or (800) , (603)
Designed for Enterprise Network Testing, Troubleshooting and Documentation Features Industry leading TruEvent analysis Short dead zones provide precise testing of closely spaced events Front Panel and
2016 CDM Smith All Rights Reserved July 2016 SECTION FIBER OPTIC DATA NETWORK
PART 1 GENERAL 1.01 SCOPE OF WORK SECTION 27 12 23 FIBER OPTIC DATA NETWORK A. Furnish, install, terminate, and test all fiber optic equipment and cabling necessary for a complete and functional data highway
Variable Temperature Microprobe Systems
Variable Temperature Microprobe Systems the world s resource for variable temperature solid state characterization 2 The Variable Temperature Microprobe System The variable temperature microprobe system
STANDARD CONFORMANCE
STANDARD CONFORMANCE IEC 60331-11, Tests for electric cables under fire conditions- Circuit integrity- Fire alone at a flame temperature of at least 750C IEC 60331-21, Tests for electric cables under fire
Qualification Test Report LC Duplex Adapter For LC Cutouts
Qualification Test Report LC Duplex Adapter For LC Cutouts 501-683 09Mar09 Rev B 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics LC Duplex Adapters for LC Cutouts, to determine their
Data Sheet. Humidity control products. Data Pack K Issued February
Data Pack K Issued February 2004 1502324768 Data Sheet Humidity control products Introduction A comprehensive range of humidity control products primarily intended for use in electrical/electronic enclosures
STANDARD FOR INDOOR-OUTDOOR OPTICAL FIBER CABLE
ANSI/ICEA S-104-696-2001 STANDARD FOR INDOOR-OUTDOOR OPTICAL FIBER CABLE Publication S-104-696 First Edition - September 2001 Published By Insulated Cable Engineers Association, Inc. Post Office Box 1568
Wide Band Flame Detector KLC 20 for all kind of oil flames with intermittent burnerr operations
KLC 20 0 (formerly known as KLC 2002) CE0085BP0001 Technical Information Wide Band Flame Detector KLC 20 for all kind of oil flames with intermittent burnerr operations Short Description The wide band
APPLIED. OMA-406R Rackmount Process Analyzer
A window into your process since 1994. The OMA Process Analyzer continuously measures chemical concentrations and physical properties that can be correlated from the 200-1100 nm (UV-Vis / SW-NIR) absorbance
Agilent E6000A E6003A Specs Provided by E6000C Mini-OTDR. Technical Data Sheet
Agilent E6000A E6003A Specs Provided by www.aaatesters.com E6000C Mini-OTDR Technical Data Sheet Specifications describe the instrument s warranted performance, measured with typical PC-type connectors.
industry solutions: military
industry solutions: military MC industry Solutions: Military A tradition of leadership in technology, product performance for military applications Optical Cable Corporation is a leading manufacturer of
LiteFENCE Lite with SV Lite Sensor
LiteFENCE Lite with SV Lite Sensor SECURITY DEVICE FOR PERIMETER PROTECTION INSTALLATION MANUAL LiteFENCE Lite analyser LFEN300F011L SV Lite sensor vibration sensor VBRS025S000L V. 003 1 LiteFENCE Lite
Varian, Inc. Vacuum Technologies. Diffusion Pumps. Features and Benefits 2-3. Typical Applications 4-5. Pump Models Fluids
Varian, Inc. Vacuum Technologies Diffusion Pumps Features and Benefits 2-3 Typical Applications 4-5 Pump Models 6-29 Fluids 3-31 Baffles 32-33 Technical Notes 34-37 Diffusion Pumps Features and Benefits
FiberExpress Solutions
7.2.1-A 7.2.1-B 7.2.1-C 7.2.1-D Simplex Patch Cord Duplex Patch Cord Hybrid Patch Cord Single-ended (pigtails) AX200057 Patch Cord Multimode SC Duplex DESCRIPTION FiberExpress Simplex and Duplex Patch
Agilent E6012A Specs Provided by E6000C Mini-OTDR. Technical Data Sheet
Agilent E6012A Specs Provided by www.aaatesters.com E6000C Mini-OTDR Technical Data Sheet Specifications describe the instrument s warranted performance, measured with typical PC- type connectors. Uncertainties
OPTICAL FIBER SOLUTIONS
RightWave Erbium-Doped Optical Fiber Critical component for the amplification of optical transmission signals A Furukawa Company Broad portfolio suited to diverse needs Proven product uniformity, quality
Laser Safety and Classification Full Version (CA-1110) Advanced Version (CA-1111) Basic Version (CA-1112)
Laser Safety and Classification Full Version (CA-1110) Advanced Version (CA-1111) Basic Version (CA-1112) The spectral range of lasers vary from a few nanometer up to some hundred micrometers and is mostly
W A T L O W. Straight Resistance Wire. Welded End Cap
W A T L O W The versatile Watlow cable heater can be formed to a variety of shapes as dictated by its many applications. Cable heaters are small diameter, high performance units, fully annealed and readily
A. General: Horizontal and backbone cabling shall be verified in accordance with ANSI/TIA/EIA-568-C and the addendum for fiber optic testing.
3.4 TESTING OF FIBER OPTICS CABLING A. General: Horizontal and backbone cabling shall be verified in accordance with ANSI/TIA/EIA-568-C and the addendum for fiber optic testing. B. General: In the event
The Optical Time Domain Reflectometry and the Fusion Splicer Laboratory exercise
The Optical Time Domain Reflectometry and the Fusion Splicer Laboratory exercise 1 The purpose of the exercise...2 2 Background...2 2.1 Introduction to scattering and attenuation...2 2.2 Introduction to
VACUUM VALVES AND HOSES
VACUUM VALVES AND HOSES 5046 Vacuum Valve Two-piece 500 F (260 C) industry standard 5255 Vacuum Valve Three-piece 500 F (260 C) industry standard SS5700 Stainless Steel Vacuum Valve Three-piece 1000 F
Fuel Manager Diesel Fuel Filtration. FM1, FM10, FM100 and FM1000 Complete Systems, Elements and Service Parts
uel Manager Diesel uel iltration M1, M10, M100 and M1000 Complete Systems, s and Service Parts uel Manager diesel fuel filter/water separator systems are used globally in a wide variety of diesel engine
CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN. A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO
CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN HSROG ML-111148 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43003 (June 2001) HOT SECTION 26 OVEN TOP SECTION
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
PureGain TM 2600 Variable Gain EDFA for Metropolitan Networks
FEATURES Variable Gain Amplifier with or without Mid-Stage Fully Integrated Control Electronics with State-of-the-Art Transient Suppression Control Three Standard Configurations Mk I: 17 dbm VGA (Variable
Lyovapor L-300 Technical data sheet
Lyovapor L-300 Technical data sheet With Infinite-Technology the Lyovapor L-300 offers continuous sublimation for the first time with two alternate working and automatically hygienically cleaned condensers
Broadband System - H
Broadband System - H Satellites are spaced every 2nd degrees above earth "C" Band Toward satellite 6.0 GHz Toward earth 4.0 GHz "L" Band Toward satellite 14.0 GHz Toward earth 12.0 GHz TV TRANSMITTER Headend
RSL Fiber Systems, LLC
RSL Fiber Systems, LLC Distributed Fiber Optic Temperature Sensing For Naval Combatants National Shipbuilding Research Program San Diego - December 7, 2015 This presentation is the sole property of RSL
Link loss measurement uncertainties: OTDR vs. light source power meter By EXFO s Systems Engineering and Research Team
Link loss measurement uncertainties: OTDR vs. light source power meter By EXFO s Systems Engineering and Research Team INTRODUCTION The OTDR is a very efficient tool for characterizing the elements on
Ulster Bank Business Achievers Award Emerging Technology
1 Ulster Bank Business Achievers Award 2009 - Emerging Technology Welcome to Provac Provac Ltd. was established in 1997 to supply vacuum equipment to Irish industry and the third level research community.
Based Fiber Optic Sensors
Sensing with Light Intensity-Based Intensity Based Fiber Optic Sensors Sensing with Fibers Fiber optic sensors are based on monitoring the change of optical signals propagating along the sensitive area.