333 Pfingsten Road Northbrook, Illinois 60062

Transcription

1 IAS Accreditation Number TL-157 Company Name Address 333 Pfingsten Road Northbrook, Illinois Contact Name Rick A. Titus, Manager-Accreditation Services Telephone (847) Effective Date of Scope August 31, 2018 Accreditation Standard ISO/IEC 17025:2005 Electrical/Electronic AS Fire detection, warning, control and intercom systems - Methods of test Indicator visibility test AS Fire Detection, Warning, Control and Intercom Systems - Control and Indicating Equipment, Part 3: Fire Brigade Panel AS Grid connection of energy systems via inverters - installation requirements AS AS AS AS AS AS AS Grid connection of energy systems via inverters - inverter requirements Grid connection of energy systems via inverters - grid protection requirements Fire Detection and Alarm systems; Part 2: Control and Indicating Equipment Fire Detection and Alarm systems; Part 2: Power Supply Equipment Fire detection and alarm systems; Part 5: Point type heat detectors Fire detection and alarm systems; Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization Uninterruptible power systems (UPS) - general and safety requirements for UPS used in operator access areas International Accreditation Service, Inc Saturn Street, Suite 100, Brea, California U.S.A Telephone IASInfo@iasonline.org Page 1 of 51

2 AS/NZS Grid connection of energy systems via inverters - inverter requirements CAN/CSA C22.2 NO Medical electrical equipment - part 1: general requirements for basic safety and essential performance CAN/CSA C22.2 NO Medical electrical equipment - part 2-4: particular performance of cardiac defibrillators CAN/CSA C22.2 NO Medical electrical equipment - part 2-10: particular performance of nerve and muscle stimulators CAN/CSA C22.2 NO Medical electrical equipment - part 2-16: particular performance of haemodialysis, haemodiafiltration and haemofiltration equipment CAN/CSA C22.2 NO Medical electrical equipment - part 2-17: particular performance of automatically-controlled brachytherapy afterloading equipment CAN/CSA C22.2 NO Medical electrical equipment - part 2-18: particular performance of endoscopic equipment CAN/CSA C22.2 NO Medical Electrical equipment - part 2-30: particular requirements for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment CAN/CSA C22.2 NO Medical electrical equipment - part 2-46: particular performance of operating tables CAN/ULC S525 CAN/ULC S526 CAN/ULC S527 CAN/ULC S528 CAN/ULC S529 CAN/ULC S530 Audible signaling devices for fire alarm and signaling systems, including accessories Visible signal devices for fire alarm systems, including accessories Control units for fire alarm systems Standard for manual station for fire alarm systems, including accessories Standard for smoke detectors for fire alarm systems Standard for heat actuated fire detectors for fire alarm systems TL-157 Page 2 of 51

3 CAN/ULC S531 CAN/ULC S533 CAN/ULC S536 CAN/ULC S537 CAN/ULC S541 CAN/ULC S545 CAN/ULC S559 CAN/ULC S576 Standard for smoke alarms Standard for egress door securing and releasing devices Standard for inspection and testing of fire alarm systems Standard for verification of fire alarm systems Speakers for fire alarm systems, including accessories Standard for residential fire warning system control units Standard for equipment for fire signal receiving centres and systems Standard for mass notification system equipment and accessories CENELEC-EN Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN : general requirements 2-2: particular requirements for vacuum cleaners and water-suction cleaning appliances Household and similar electrical appliances - safety part 2-3: particular requirements for electric irons 2-8: particular requirements for shavers, hair clippers and similar appliances Household and similar electrical appliances safety part 2-9: particular requirements for grills, toasters and similar portable cooking appliances CENELEC-EN Household and similar electrical appliances safety part 2-10: particular requirements for floor treatment machines and wet scrubbing machines CENELEC-EN CENELEC-EN Household and similar electrical appliances - safety part 2-12: particular requirements for warming plates and similar appliances 2-13: particular requirements for deep fat fryers, frying pans and similar appliances TL-157 Page 3 of 51

4 CENELEC-EN Household and similar electrical appliances - safety part 2-14: particular requirements for kitchen machines CENELEC-EN Household and similar electrical appliances safety part 2-15: particular requirements for appliances for heating liquids CENELEC-EN Household and similar electrical appliances safety part 2-16: particular requirements for food waste disposers CENELEC-EN CENELEC-EN CENELEC-EN : particular requirements for blankets, pads, clothing and similar flexible heating appliances Household and similar electrical appliances - safety part 2-23: particular requirements for appliances for skin or hair care 2-24: particular requirements for refrigerating appliances, ice-cream appliances and ice makers CENELEC-EN Household and similar electrical appliances safety part 2-26: particular requirements for clocks CENELEC-EN Household and similar electrical appliances safety part 2-28: particular requirements for sewing machines CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN : particular requirements for room heaters 2-31: particular requirements for range hoods and other cooking fume extractors Household and similar electrical appliances ± safety part 2-32: particular requirements for massage appliances Household and similar electrical appliances safety part 2-34: particular requirements for motor-compressors 2-35: particular requirements for instantaneous water heaters CENELEC-EN Household and similar electrical appliances safety part 2-36: particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements CENELEC-EN Household and similar electrical appliances - safety part 2-37: particular requirements for commercial electric deep fat fryers TL-157 Page 4 of 51

5 CENELEC-EN Household and similar electrical appliances safety part 2-38: particular requirements for commercial electric griddles and griddle grills incorporating corrigendum CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN Household and similar electrical appliances - safety part 2-40: particular requirements for electrical heat pumps, air-conditioners and dehumidifiers Household and similar electrical appliances - safety part 2-42: particular requirements for commercial electric forced convection ovens, steam cookers and steamconvection ovens 2-43: particular requirements for clothes dryers and towel rails Household and similar electrical appliances - safety part 2-44: particular requirements for ironers Household and similar electrical appliances - safety part 2-45: particular requirements for portable heating tools and similar appliances Household and similar electrical appliances safety part 2-49: particular requirements for commercial electric appliances for keeping food and crockery warm Safety of household and similar electrical appliances part 2-50: particular requirements for commercial electric bains-marie CENELEC-EN Household and similar electrical appliances safety part 2-52: particular requirements for oral hygiene appliances CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN : particular requirements for surface-cleaning appliances for household use employing liquids or steam Household and similar electrical appliances safety part 2-55: particular requirements for electrical appliances for use with aquariums and garden ponds Household and similar electrical appliances safety part 2-60: particular requirements for whirlpool baths and whirlpool spas Safety of household and similar electrical appliances part 2-64: particular requirements for commercial electric kitchen machine TL-157 Page 5 of 51

6 CENELEC-EN CENELEC-EN CENELEC-EN : particular requirements for floor treatment machines for commercial use 2-68: particular requirements for spray extraction machines, for commercial use 2-69: particular requirements for wet and dry vacuum cleaners, including power brush for commercial use CENELEC-EN Household and similar electrical appliances safety part 2-71: particular requirements for electrical heating appliances for breeding and rearing animals CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN : particular requirements for floor treatment machines with or without traction drive, for commercial use Household and similar electrical appliances - safety part 2-74: particular requirements for portable immersion heaters Household and similar electrical appliances safety part 2-75: particular requirements for commercial dispensing appliances and vending machines Household and similar electrical appliances safety part 2-76: particular requirements for electric fence energizers CENELEC-EN Safety of household and similar appliances - part 2-77: particular requirements for pedestrian-controlled walkbehind electrically powered lawn mowers CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN Household and similar electrical appliances safety part 2-78: particular requirements for outdoor barbecues 2-79: particular requirements for high pressure cleaners and steam cleaners Household and similar electrical appliances - safety part 2-80: particular requirements for fans Household and similar electrical appliances - safety part 2-81: particular requirements for foot warmers and heating mats TL-157 Page 6 of 51

7 CENELEC-EN Household and similar electrical appliances safety part 2-84: particular requirements for toilets CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN Household and similar electrical appliances - safety part 2-85: particular requirements for fabric steamers 2-89: particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor 2-95: particular requirements for drives for vertically moving garage doors for residential use Household and similar electrical appliances - safety part 2-97: particular requirements for drives for rolling shutters, awnings, blinds and similar equipment Household and similar electrical appliances - safety part 2-101: particular requirements for vaporizers Electrical apparatus for the detection and measurement of oxygen - performance requirements and test methods Electromagnetic compatibility - electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - requirements and tests for apparatus using software and/or digital technologies Group I, category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust Explosive atmospheres - part 0: equipment - general requirements Explosive atmospheres - part 1: equipment protection by flameproof enclosures "d" Explosive atmospheres - part 2: equipment protection by pressurized enclosure "p" Explosive atmospheres - part 5: equipment protection by powder filling "q" Explosive atmospheres - part 6: equipment protection by liquid immersion "o" TL-157 Page 7 of 51

8 CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN Explosive atmospheres - part 7: equipment protection by increased safety "e" Explosive atmospheres - part 11: equipment protection by intrinsic safety "i" Explosive atmospheres - part 13: equipment protection by pressurized room "p" Explosive atmospheres - part 15: equipment protection by type of protection "n" Explosive atmospheres - part 18: equipment protection by encapsulation "m" CENELEC-EN Explosive atmospheres - part 25: intrinsically safe electrical systems CENELEC-EN Explosive atmospheres - part 26: equipment with equipment protection level (EPL) a CENELEC-EN Explosive atmospheres - part 27: fieldbus intrinsically safe concept (FISCO) CENELEC-EN Explosive atmospheres - part 28: protection of equipment and transmission systems using optical radiation CENELEC-EN Explosive atmospheres - part 29-1: gas detectors - performance requirements of detectors for flammable gases CENELEC-EN Explosive atmospheres - part 29-4: gas detectors - performance requirements of open path detectors for flammable gases CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN CENELEC-EN Explosive atmospheres - part 30-1: electrical resistance trace heating - general and testing requirements Explosive atmospheres - part 31: equipment dust ignition protection by enclosure "t" Explosive atmospheres - part 33: equipment protection by special protection 'S' Explosive atmospheres - part 35-1: caplights for use in mines susceptible to firedamp - general requirements - construction and testing in relation to the risk of explosion Explosive atmospheres - part 35-2: caplights for use in mines susceptible to firedamp - performance and other safety-related matters TL-157 Page 8 of 51

9 CENELEC-EN Degrees of protection provided by enclosures (IP code) CENELEC-EN Electrical apparatus for use in the presence of combustible dust part 2: test methods section 2: method for determining the electrical resistivity of dust in layers CENELEC-EN Electrical apparatus for use in the presence of combustible dust part 4: type of protection pd CENELEC-EN Electrical apparatus for use in the presence of combustible dust part 11: protection by intrinsic safety "id" CENELEC-EN Caplights for use in mines susceptible to firedamp Part 1: General requirements - construction and testing in relation to the risk of explosion CSA C22.2 NO. 0.3 Test methods for electrical wires and cables EN : Domestic cooking appliances burning gas - Part 1-1: Safety General EN : Domestic cooking appliances burning gas - Safety - Part 1-2: Appliances having forced-convection ovens and/or grills EN : Domestic cooking appliances burning gas - Part 1-3: Safety - Appliances having a glass ceramic hotplate EN : Domestic cooking appliances burning gas - Safety - Part 1-4: Appliances having one or more burners with an automatic burner control system EN : Domestic cooking appliances burning gas - Part 2-1: Rational use of energy General EN : Domestic cooking appliances burning gas - Part 2-2: Rational use of energy - Appliances having forcedconvection ovens and/or grills EN 54-2 EN 54-3 EN 54-4 EN 54-5 Fire detection and fire alarm systems - part 2: control and indicating equipment Fire detection and fire alarm systems - part 3: fire alarm devices - sounders Fire detection and fire alarm systems - part 4: power supply equipment Fire detection and fire alarm systems - Part 5: heat detectors - Point detectors TL-157 Page 9 of 51

10 EN 54-7 EN EN EN EN Fire detection and fire alarm systems - part 7: smoke detectors - point detectors using scattered light, transmitted light or ionization Fire detection and fire alarm systems - part 11: manual call points Fire detection and fire alarm systems - part 12: smoke detectors - line detectors using an optical light beam Fire detection and fire alarm systems - part 16: voice alarm control and indicating equipment Fire detection and fire alarm systems - part 17: shortcircuit isolators EN Fire detection and fire alarm systems - part 18: input/output devices EN Fire detection and fire alarm systems - part 20: aspirating smoke detectors EN EN Fire detection and fire alarm systems - part 21: alarm transmission and fault warning routing equipment Fire detection and fire alarm systems - part 23: fire alarm devices - visual alarm devices EN Fire detection and fire alarm systems - part 24: components of voice alarm systems - loudspeakers EN Fire detection and fire alarm systems - part 25: components using radio links EN 203-1: EN : EN : EN : EN : EN : Gas heated catering equipment - Part 1: General safety rules Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok burners Gas heated catering equipment - Part 2-2: Specific requirements - Ovens Gas heated catering equipment - Part 2-3: Specific requirements - Boiling pans Gas heated catering equipment - Part 2-4: Specific requirements - Fryers Gas heated catering equipment - Part 2-6: Specific requirements - Hot water heaters for beverage TL-157 Page 10 of 51

11 EN : EN : EN : EN : EN : EN EN EN EN Gas heated catering equipment - Part 2-7: Specific requirements - Salamanders and rotisseries Gas heated catering equipment - Part 2-8: Specific requirements - Brat pans and paëlla cookers Gas heated catering equipment - Part 2-9: Specific requirements - Solid tops, warming plates and griddles Gas heated catering equipment - Part 2-10: Specific requirements - Chargrills Gas heated catering equipment - Part 2-11: Specific requirements - Pasta cookers Gas heated catering equipment. Materials and parts in contact with food and other sanitary aspects Smoke alarm devices LPG Equipment and accessories Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings Alarm systems part 5: environmental test methods EN Alarm systems - intrusion and hold-up systems - part 1: system requirements EN Alarm systems- intrusion and hold-up systems- part 2-2: intrusion detectors- passive infrared detectors EN Alarm systems - intrusion and hold-up systems - part 2-3: requirements for microwave detectors EN Alarm systems- intrusion and hold-up systems- part 2-4: requirements for combined passive infrared and microwave detectors EN Alarm systems - intrusion and hold-up systems - part 2-5: requirements for combined passive infrared and ultrasonic detectors EN Alarm systems - intrusion and hold-up systems - part 2-6: opening contacts (magnetic) EN Draft document - alarm systems - intrusion and hold-up systems - part 2-7-1: intrusion detectors - glass break detectors (acoustic) EN Alarm systems - intrusion and hold-up systems - part 2-7-2: intrusion detectors - glass break detectors (passive) TL-157 Page 11 of 51

12 EN Alarm systems - Intrusion and hold-up systems - part 2-7-3: intrusion detectors - glass break detectors (active) EN Alarm systems - intrusion and hold-up systems - part 3: control and indicating equipment EN Alarm systems - intrusion and hold-up systems - part 4: warning devices EN Alarm systems - intrusion systems - part 5-3: requirements for interconnections equipment using radio frequency techniques EN Alarm systems- intrusion and hold-up systems- part 6: power supplies EN Alarm systems - alarm transmission systems and equipment EN Alarm systems - alarm transmission systems and equipment - part 1: general requirements for alarm transmission systems EN Alarm systems - alarm transmission systems and equipment - part 1-1: general requirements for alarm transmission systems EN Alarm systems - alarm transmission systems and equipment - part 1-2: requirements for systems using dedicated alarm paths EN Alarm systems - alarm transmission systems and equipment - part 1-3: requirements for systems with digital communicators using the public switched telephone network EN Alarm systems - alarm transmission systems and equipment - part 1-4: requirements for systems with voice communicators using the public switched telephone network EN Alarm systems - alarm transmission systems and equipment - part 1-5: requirements for packet switched network PSN EN Alarm systems - alarm transmission systems and equipment - part 2-1: general requirements for alarm transmission equipment EN Alarm systems - alarm transmission systems and equipment - part 2-2: requirements for equipment used in systems using dedicated alarm paths TL-157 Page 12 of 51

13 EN Alarm systems - alarm transmission systems and equipment - part 2-3: requirements for equipment used in systems with digital communicators using the public switched telephone network EN Alarm systems - alarm transmission systems and equipment - part 2-4: requirements for equipment used in systems with voice communicators using the public switched telephone network EN EN EN EN EN EN EN Electrical apparatus for the detection of carbon monoxide in domestic premises - part 1: test methods and performance requirement Household and similar electrical appliances safety - part 2-4: particular requirements for spin extractors Household and similar electrical appliances safety - part 2-7: particular requirements for washing machines 2-11: particular requirements for tumble dryers 2-41: particular requirements for pumps 2-51: particular requirements for stationary circulation pumps for heating and service water installations 2-103: particular requirements for drives for gates, doors and windows EN Utility-interconnected photovoltaic inverters Test procedure of islanding prevention measures EN EN EN Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety - part 1: general requirements Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety - part 2-2: particular requirements for hand-held screwdrivers and impact wrenches Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety - part 2-4: particular requirements for hand-held sanders and polishers other than disc type TL-157 Page 13 of 51

14 EN EN EN EN EN Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety - part 2-5: particular requirements for hand-held circular saws Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety - part 2-9: particular requirements for hand-held tappers and threaders Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety - part 3-1: particular requirements for transportable table saws Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety - part 3-6: particular requirements for transportable diamond drills with liquid system Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety - part 3-9: particular requirements for transportable mitre saws EN/ISO Explosive atmospheres -- part 36: non-electrical equipment for explosive atmospheres -- basic method and requirements EN/ISO Explosive atmospheres -- part 37: non-electrical equipment for explosive atmospheres -- non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion 'k'' IEC Rotating electrical machines - part 1: rating and performance (clause 8 for air-cooled motors) IEC Rotating electrical machines - part 2-1: standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) IEC IEC IEC IEC IEC Rotating electrical machines - part 11: thermal protection (clause 5 and 6) Rotating electrical machines - part 30-1: efficiency classes of line operated AC motors (IE code) Audio, video and similar electronic apparatus - safety requirement Explosive atmospheres - part 0: equipment - general requirements Explosive atmospheres - part 1: equipment protection by flameproof enclosures "d" TL-157 Page 14 of 51

15 IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC Electrical apparatus for explosive gas atmospheres - part 1-1: flameproof enclosures "d" - method of test for ascertainment of maximum experimental safe Explosive atmospheres - part 2: equipment protection by.pressurized enclosure "p" Electrical apparatus for explosive gas atmospheres - part 4: method of test for ignition temperature Explosive atmospheres - part 5: equipment protection by powder filling "q" Explosive atmospheres - part 6: equipment protection by liquid immersion "o" Explosive atmospheres - part 7: equipment protection by increased safety "e" Explosive atmospheres - part 11: equipment protection by intrinsic safety "i" Explosive atmospheres - part 13: equipment protection by pressurized room "p" Explosive atmospheres - part 15: equipment protection by type of protection "n" Explosive atmospheres - part 18: equipment protection by encapsulation "m" IEC Explosive atmospheres - part 25: intrinsically safe electrical systems IEC Explosive atmospheres - part 26: equipment with equipment protection level (EPL) Ga IEC (withdrawn) IEC Explosive atmospheres - part 27: fieldbus intrinsically safe concept (FISCO) Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation IEC Explosive atmospheres - part 29-1: gas detectors - performance requirements of detectors for flammable gases IEC Explosive atmospheres - part 29-2: gas detectors - selection, installation, use and maintenance of detectors for flammable gases and oxygen TL-157 Page 15 of 51

16 IEC Explosive atmospheres - part 29-4: gas detectors - performance requirements of open path detectors for flammable gases IEC IEC/IEEE IEC Explosive atmospheres - part 30-1: electrical resistance trace heating - general and testing requirements Explosive atmospheres - part 30-1: electrical resistance trace heating - general and testing requirements Explosive atmospheres - part 31: equipment dust ignition protection by enclosure "t" IEC Explosive atmospheres Part 32-2: Electrostatics hazards Tests IEC IEC IEC IEC TS IEC TS IEC IEC IEC IEC IEC IEC Explosive atmospheres - part 33: equipment protection by special protection s Explosive atmospheres - part 35-1: caplights for use in mines susceptible to firedamp - general requirements - construction and testing in relation to the risk of explosion Explosive atmospheres - part 35-2: caplights for use in mines susceptible to firedamp - performance and other safety-related matters Explosive atmospheres Part 40: requirements for process sealing between flammable process fluids and electrical systems Explosive atmospheres Part 46: Equipment assemblies Standard for rechargeable batteries for multi-cell mobile computing devices Primary batteries - part 2: physical and electrical specifications Primary batteries - part 4: safety of lithium batteries Primary batteries - part 5: safety of batteries with aqueous electrolyte Plugs, socket-outlets and couplers for industrial purposes - part 1: general requirements Plugs, socket-outlets and couplers for industrial purposes - part 2: dimensional interchangeability requirements for pin and contact-tube accessories TL-157 Page 16 of 51

17 IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC Tests on electric and optical fibre cables under fire conditions - part 1-2: test for vertical flame propagation for a single insulated wire or cable - procedure for 1 kw pre-mixed flame 1: general requirements 2-2: particular requirements for vacuum cleaners and water-suction cleaning appliances 2-3: particular requirements for electric irons 2-4: particular requirements for spin extractors 2-7: particular requirements for washing machines 2-8: particular requirements for shavers, hair clippers and similar appliances 2-9: particular requirements for grills, toasters and similar portable cooking appliances 2-10: particular requirements for floor treatment machines and wet scrubbing machines 2-11: particular requirements for tumble dryers 2-12: particular requirements for warming plates and similar appliances 2-13: particular requirements for deep fat fryers, frying pans and similar appliances 2-14: particular requirements for kitchen machines 2-15: particular requirements for appliances for heating liquids TL-157 Page 17 of 51

18 IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC : particular requirements for food waste disposers 2-17: particular requirements for blankets, pads, clothing and similar flexible heating appliances 2-23: particular requirements for appliances for skin or hair care 2-24: particular requirements for refrigerating appliances, ice-cream appliances and ice makers 2-26: particular requirements for clocks 2-28: particular requirements for sewing machines Household and similar electrical appliances - safety -part 2-30: particular requirements for room heaters 2-31: particular requirements for range hoods and other cooking fume extractors 2-32: particular requirements for massage appliances 2-34: particular requirements for motor-compressors 2-35: particular requirements for instantaneous water heaters 2-36: particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements 2-37: particular requirements for commercial electric deep fat fryers 2-38: particular requirements for commercial electric griddles and griddle grills TL-157 Page 18 of 51

19 IEC IEC IEC : particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (excluding annex FF) 2-41: particular requirements for pumps 2-42: particular requirements for commercial electric forced convection ovens, steam cookers and steamconvection ovens IEC Household and similar electrical appliances safety part 2-43: particular requirements for clothes dryers and towel rails IEC Household and similar electrical appliances safety part 2-44: particular requirements for ironers IEC : particular requirements for portable heating tools and similar appliances IEC Household and similar electrical appliances safety part 2-49: particular requirements for commercial electric appliances for keeping food and crockery warm IEC Household and similar electrical appliances safety part 2-50: particular requirements for commercial electric bains-marie IEC Safety of household and similar electrical appliances - part 2: particular requirements for stationary circulation pumps for heating and service water installations IEC IEC IEC IEC IEC : particular requirements for oral hygiene appliances 2-54: particular requirements for surface-cleaning appliances for household use employing liquids or steam 2-55: particular requirements for electrical appliances for use with aquariums and garden ponds 2-60: particular requirements for whirlpool baths 2-64: particular requirements for commercial electric kitchen machines TL-157 Page 19 of 51

20 IEC IEC IEC IEC IEC : particular requirements for floor treatment machines, for commercial use 2-68: particular requirements for spray extraction machines, for commercial use 2-69: particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use 2-71: particular requirements for electrical heating appliances for breeding and rearing animals 2-72: particular requirements for floor treatment machines with or without traction drive, for commercial use IEC Household and similar electrical appliances safety part 2-74: particular requirements for portable immersion heaters IEC : particular requirements for commercial dispensing appliances and vending machines IEC Household and similar electrical appliances safety part 2-76: particular requirements for electric fence energizers IEC IEC IEC IEC IEC : particular requirements for pedestrian controlled mains-operated lawnmowers 2-78: particular requirements for outdoor barbecues 2-79: particular requirements for high pressure cleaners and steam cleaners 2-80: particular requirements for fans 2-81: particular requirements for foot warmers and heating mats TL-157 Page 20 of 51

21 IEC IEC IEC IEC IEC IEC IEC IEC : particular requirements for toilets 2-85: particular requirements for fabric steamers 2-89: particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor 2-95: particular requirements for drives for vertically moving garage doors for residential use 2-97: particular requirements for drives for shutters, awnings, blinds and similar equipment 2-101: particular requirements for vaporizers 2-103: particular requirements for drives for gates, doors and windows Degrees of protection provided by enclosures (IP code) IEC Medical electrical equipment - part 1: general requirements for basic safety and essential performance IEC Medical electrical equipment - part 1-3: general requirements for basic safety and essential performance - collateral standard: radiation protection in diagnostic x- ray equipment IEC Medical electrical equipment -- part 1-8: general requirements for basic safety and essential performance - - collateral standard: general requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems IEC Medical electrical equipment Part 1-10: General requirements for basic safety and essential performance Collateral Standard: Requirements for the development of physiologic closed-loop controllers IEC Medical electrical equipment -- part 1-11: general requirements for basic safety and essential performance - - collateral standard: requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment TL-157 Page 21 of 51

22 IEC Medical electrical equipment - part 2-2: particular performance of high frequency surgical equipment and high frequency surgical accessories IEC Medical electrical equipment part 2-5: particular performance of ultrasonic physiotherapy equipment IEC Medical electrical equipment - part 2-8: particular requirements for basic safety and essential performance of therapeutic x-ray equipment operating in the range 10 kv to 1 MV IEC IEC IEC IEC IEC IEC IEC IEC IEC Medical electrical equipment - part 2-10: particular performance of nerve and muscle stimulators Medical electrical equipment - part 2-11: particular performance of gamma beam therapy equipment Medical electrical equipment - part 2-16: particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment Medical electrical equipment - part 2-18: particular performance of endoscopic equipment Medical electrical equipment - part 2-19: particular performance of infant incubators Medical electrical equipment - part 2-20: particular performance of infant transport incubators Medical electrical equipment - part 2-21: particular performance of infant radiant warmers Medical electrical equipment - part 2-23: particular performance of transcutaneous partial pressure monitoring equipment Medical electrical equipment - part 2-24: particular performance of infusion pumps and controllers TL-157 Page 22 of 51

23 IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC Medical electrical equipment - part 2-25: particular performance of electrocardiographs Medical electrical equipment - part 2-26: particular performance of electroencephalographs Medical electrical equipment - part 2-27: particular performance of electrocardiographic monitoring equipment Medical electrical equipment - part 2-28: particular performance of x-ray tube assemblies for medical diagnosis Medical electrical equipment - part 2-29: particular performance of radiotherapy simulators Medical electrical equipment - part 2-34: particular performance of invasive blood pressure monitoring equipment Medical electrical equipment part 2-35: particular requirements for the safety of blankets, pads and mattresses intended for heating in medical use Medical electrical equipment - part 2-36: particular performance of equipment for extracorporeally induced lithotripsy Medical electrical equipment - part 2-37: particular performance of ultrasonic medical diagnostic and monitoring equipment Medical electrical equipment - part 2-39: particular requirements for basic safety and essential performance of peritoneal dialysis equipment Medical electrical equipment - part 2-40: particular requirements for the safety of electromyographs and evoked response equipment Medical electrical equipment - part 2-41: particular TL-157 Page 23 of 51

24 performance of surgical luminaires and luminaires for diagnosis IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC Medical electrical equipment - part 2-44: particular performance of x-ray equipment for computed tomography Medical electrical equipment - part 2-45: particular requirements for basic safety and essential performance of mammographic x-ray equipment and mammomagraphic stereotactic devices Medical electrical equipment - part 2-46: particular performance of operating tables Medical electrical equipment - part 2-47: particular performance of ambulatory electrocardiographic systems Medical electrical equipment - part 2-49: particular performance of multifunction patient monitoring equipment Medical electrical equipment - Part 2-50: Particular performance of infant phototherapy equipment Medical electrical equipment -- part 2-52: particular performance of medical beds Medical electrical equipment - part 2-50: particular performance of infant phototherapy equipment Medical electrical equipment - part 2-57: particular performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use Medical electrical equipment - part 2-62: particular performance of high intensity therapeutic ultrasound (hitu) equipment Medical electrical equipment - part 2-63: particular performance of dental extra-oral x-ray equipment TL-157 Page 24 of 51

25 IEC IEC Medical electrical equipment - part 2-65: particular performance of dental intra-oral x-ray equipment Medical electrical equipment - part 2-66: particular performance of hearing instruments and hearing instrument systems IEC Hand-held motor-operated electric tools - safety - part 1: general requirements IEC Hand-held motor-operated electric tools - safety - part 1: general requirements IEC Hand-held motor-operated electric tools safety part 2-2: particular requirements for screwdrivers and impact wrenches IEC Hand-held motor-operated electric tools - safety - part 2-3: particular requirements for grinders, polishers and disk-type sanders IEC Hand-held motor-operated electric tools - safety - part 2-4: particular requirements for sanders and polishers other than disk type IEC Hand-held motor-operated electric tools - safety - part 2-5: particular requirements for circular saws IEC Hand-held motor-operated electric tools - safety - part 2-6: particular requirements for hammers IEC Hand-held motor-operated electric tools - safety - part 2-8: particular requirements for shears and nibblers IEC Hand-held motor-operated electric tools - safety - part 2-9: particular requirements for tappers IEC Hand-held motor-operated electric tools - safety - part 2-11: particular requirements for reciprocating saws (jig and sabre saws) IEC Hand-held motor-operated electric tools - safety - part 2-12: particular requirements for concrete vibrators IEC Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers IEC Hand-held motor-operated electric tools - safety - part 2-16: particular requirements for tackers TL-157 Page 25 of 51

26 IEC Hand-held motor-operated electric tools - safety - part 2-17: particular requirements for routers and trimmers IEC Hand-held motor-operated electric tools - safety - part 2-18: particular requirements for strapping tools IEC Hand-held motor-operated electric tools - safety - part 2-19: particular requirements for jointers IEC Hand-held motor-operated electric tools - safety - part 2-20: particular requirements for band saws IEC Hand-held motor-operated electric tools - safety - part 2-21: particular requirements for drain cleaners IEC Information technology equipment safety part 1: general requirements (excluding annex CC) IEC Safety requirements for electrical equipment for measurement, control, and laboratory use - part 1: general requirements IEC Safety requirements for electrical equipment for measurement, control and laboratory use - part 2-010: particular requirements for laboratory equipment for the heating of materials IEC Safety requirements for electrical equipment for measurement, control, and laboratory use - part 2-020: particular requirements for laboratory centrifuges IEC Safety requirements for electrical equipment for measurement, control, and laboratory use - part 2-030: particular requirements for testing and measuring circuits IEC Safety requirements for electrical equipment for measurement, control and laboratory use - part 031: safety requirements for hand-held probe assemblies for electrical measurement and test IEC Safety requirements for electrical equipment for measurement, control, and laboratory use - part 2-032: particular requirements for hand-held and handmanipulated current sensors for electrical test and measurement IEC Safety requirements for electrical equipment for measurement, control, and laboratory use - part 2-033: particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage TL-157 Page 26 of 51

27 IEC Safety requirements for electrical equipment for measurement, control, and laboratory use - part 2-040: particular requirements for sterilizers and washerdisinfectors used to treat medical materials IEC Safety requirements for electrical equipment for measurement, control and laboratory use - part 2-051: particular requirements for laboratory equipment for mixing and stirring IEC Safety requirements for electrical equipment for measurement, control and laboratory use - part 2-061: particular requirements for laboratory atomic spectrometers with thermal atomization and ionization IEC Safety requirements for electrical equipment for measurement, control and laboratory use - part 2-081: particular requirements for automatic and semiautomatic laboratory equipment for analysis and other purposes IEC Safety requirements for electrical equipment for measurement, control and laboratory use - part 2-091: particular requirements for cabinet x-ray systems IEC Safety requirements for electrical equipment for measurement, control and laboratory use - part 2-101: particular requirements for in vitro diagnostic (IVD) medical equipment IEC Safety requirements for electrical equipment for measurement, control and laboratory use - part 2-201: particular requirements for control equipment IEC Explosive atmospheres - part 0: equipment - general requirements IEC Electrical apparatus for use in the presence of combustible dust - part 1: protection by enclosures "td" IEC Electrical apparatus for use in the presence of combustible dust - part electrical apparatus protected by enclosures and surface temperature limitation - specification for apparatus IEC Electrical apparatus for use in the presence of combustible dust - part 2: test methods - section 1: methods for determining the minimum ignition temperatures of dust IEC Electrical apparatus for use in the presence of combustible dust - part 2: test methods - section 2: TL-157 Page 27 of 51

28 method for determining the electrical resistivity of dust in layers IEC Electrical apparatus for use in the presence of combustible dust - part 2: test methods - section 3: method for determining minimum ignition energy of dust/air mixtures IEC Electrical apparatus for use in the presence of combustible dust - part 4: type of protection "pd" IEC IEC IEC IEC IEC IEC IEC IEC IEC Explosive atmospheres - part 11: equipment protection by intrinsic safety "id" Explosive atmospheres - part 18: equipment protection by encapsulation "m" Cable management - cable tray systems and cable ladder systems Safety of Power Transformers, Power Supplies, Reactors and Similar Products - Part 1: General Requirements and Tests Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications Safety of Power Transformers, Power Supply Units and Similar - Part 2-2: Particular Requirements for Control Transformers Safety of transformers, reactors, power supply units and similar products for supply voltages up to V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating Safety of transformers, reactors, power supply units and similar products for supply voltages up to V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating Safety of transformers, reactors, power supply units and similar products for supply voltages up to V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units TL-157 Page 28 of 51

29 IEC IEC IEC Electrical apparatus for the detection and measurement of flammable gases part 1: general requirements and test methods Electrical apparatus for the detection and measurement of flammable gases - part 4: performance requirements for group II apparatus indicating up to 100% lower explosive limit Electrical apparatus for the detection and measurement of flammable gases - part 5: performance requirements for group II apparatus indicating a volume fraction up to 100 % gas IEC Instrument transformers - Part 3: Additional requirements for inductive voltage transformers IEC IEC IEC IEC IEC Secondary cells and batteries containing alkaline or other non-acid electrolytes - portable sealed rechargeable single cells - part 1: nickel-cadmium Secondary cells and batteries containing alkaline or other non-acid electrolytes - portable sealed rechargeable single cells - part 2: nickel-metal hydride Secondary cells and batteries containing alkaline or other non-acid electrolytes - secondary lithium cells and batteries for portable applications Connectors- safety requirements and tests Uninterruptible power systems (UPS) - part 1: general and safety requirements for UPS IEC Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements IEC IEC Safety of power converters for use in photovoltaic power systems - Part 1: General requirements Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters IEC Utility-interconnected photovoltaic inverters Test procedure of islanding prevention measures IEC Secondary cells and batteries containing alkaline or other non-acid electrolytes - safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications TL-157 Page 29 of 51