Series 47 Elegance. Custom Made Roller Blinds. Product Information. Elegance Manual - Version Page 1

Transcription

1 Series 47 Elegance Custom Made Roller Blinds Product Information Elegance Manual - Version Page 1

2 Elegance 1. Fabrics. Custom Made Roller Blinds a. Viewty Plain i. NN12 White ii. NN15 Monaco Snow iii. NN31 Catalina Flesh iv. NN23 Cream v. NN25 Beige vi. NN33 Peach vii. NN35 Light Straw viii. NN37 Monaco Putty ix. NN38 Caramel x. NN82 Monaco Ash xi. NN85 Taupe xii. NN87 Chocolate xiii. NN45 Grey xiv. NN43 Shell xv. NN71 Pink xvi. NN72 Violet xvii. NN53 Purple xviii. NN77 Tawny Port xix. NN62 Green xx. NN65 - Olive xxi. NN67 Pesto xxii. NN51 Blue xxiii. NN55 Provincial Blue xxiv. NN56 Majolica Blue xxv. NN48 Charcoal xxvi. NN98 Black b. Viewty Cubic i. WC 12 White ii. WC 15 Monaco Snow iii. WC 45 Grey iv. WC 72 Violet v. WC 87 Chocolate c. Viewty Tetris i. WT 12 White ii. WT 15 Monaco Snow iii. WT 45 Grey iv. WT 72 Violet v. WT 87 Chocolate d. Sonatine Naturals i.sn-n23 Soft White ii. SN-N31 Mushroom iii. SN-N34 Mocha iv. SN-N36 Camel v. SN-N38 Coffee Brown vi. SN-N84 Black Brown vii. SN-N68 Clay Green e. Sonatine Natural Crystal T i. SN CT33 Mushroom ii. SN CT37 Brown iii. SN CT72 Violet iv. SN CT38 Gold v. SN-CT56 Majolica Blue f. Sonatine Natural Crystal S i. SN CS23 Soft White ii. SN CS31 Mushroom iii. SN CS34 Mocha iv. SN CS36 Camel v. SN CS38 Coffee Brown vi. SN CS84 Black Brown g. Sonatine Crystal i. SNC 15 Winter White ii. SNC 24 Astoria iii. SNC 36 Chamois iv. SNC 39 Desert Tan v. SNC 45 Pigeon Grey vi. SNC 49 Earth Grey vii. SNC 55 Lavender Blue viii. SNC 57 Passion Violet ix. SNC 69 Arbor Green x. SNC 75 Calypso Orange xi. SNC 78 Adam s Red xii. SNC 79 Antique Mauve xiii. SNC 89 Seal Brown xiv. SNC 95 Black Jack h. Sonatine Crystal M i. SN CM14 Winter White ii. SN CM48 Earth Grey iii. SN CM54 Lavender Blue iv. SN CM56 Passion Violet v. SN CM68 Arbor Green vi. SN CM77 Adam s Red vii. SN CM78 Antique Mauve viii. SN CM88 Seal Brown i. Blockout (Genesis) i. Storm ii. Beige iii. Clay iv. Anthracite v. Teak vi. Black Elegance Manual - Version Page 2

3 2. Accessories. a. Cassette / Bottom Bar i. White ii. Ivory iii. Silver / Grey b. Cord i. White ii. Ivory iii. Silver Grey c. Cord Length [Standard Cord length] i. 500 ii. 750 iii iv v vi vii viii ix White 3. Maximum and Minimum Blind Sizes Fabric Minimum Width Maximum Width Minimum Drop Maximum Drop Plain 300mm 2700mm 600mm 2700mm Naturals 300mm 2700mm 600mm 2700mm NB: Minimum blind cost is 1.5m². 4. Packaging Each Blind will be packed individually. 5. Lead Times Orders from customers will be consolidated and placed on the factory weekly. Orders will be dispatched from our Smithfield warehouse within 21 days of the order being placed on the factory. 6. Order Forms All orders must be placed in writing and preferably electronically on the correct order form to ensure all details are recorded correctly. The Excel Form is available on our website Please to info@oslnsw.com.au Elegance Manual - Version Page 3

4 7. Promotional Materials. a. Swatches The Curtain Hardware Company will supply swatches at cost. b. Showroom Blinds Showroom blinds to a maximum of 2m² will be supplied at 30% off list price. c. Sample Blinds Sample Blinds for in house demonstrations will be supplied at 30% off list price. NB: Discount is off blind cost only. Freight and duty at cost. 8. Multiple Blinds Single Cassette 9. Warranty Multiple Blinds in a single Cassette are not possible. Materials and Workmanship are covered for 3 years for normal use of blinds. Warranty does not include damage from abuse, inappropriate cleaning agents and methods, careless handling, freight, installers mishandling or blinds made outside of recommended sizing. Product failure after 1 year will be assessed and should a legitimate claim be approved a pro-rata basis of correction will be applied. 10. Warranty Claim Process Image to be taken of whole blind Image to be taken of label in head box Image to be taken of problem Original order to be attached Note which Blind number on Order with issue All Damaged items to be returned by the Customer 11. Suitable Locations Elegance Blinds look great in almost any situation. However there are some environments that should be avoided a. Very breezy or windy locations. [Fabric edges will be damaged]. b. In reach of pets or young children. c. Where blinds are continually moist. [Mildew will eventually form] d. In locations where chemicals are strong e.g.: chlorine from indoor pool or spa. e. Outdoors. f. Windows with controls that are reached for behind the blind. 12. Lining up Stripes [Side by Side Blinds] Blinds situated Side-by-Side will have stripes line up ONLY if they are identical Drop and installed with Cassette at EXACTLY the same level Otherwise line up is not possible. Blinds side-by-side should be noted on orders. Elegance Manual - Version Page 4

5 13. Measuring. C A B D Fig 1 - Inside Mount Fig 2 - Outside Mount a. Inside Mount [Reveal Installation] SEE Fig 1. Measuring for Inside mount is critical to ensure a great result. i. Measure inside Reveal at A [width] and B [drop]. It is important that A is measured where the Cassette will be installed, as it is the widest part of the blind. [The Cassette is approximately 30mm wider than the fabric 15mm each side]. Clearance deduction for the width is 3 5mm. ii. Unlike other Roller Blinds, the drop measurement is critical to the correct function of the blind. The manufacturing process governs that the blind is in the full stripe overlap position at the specified drop. There is some personal preference latitude here as to whether a. No deduction is made [Bottom Rail will sit on reveal] b. 5mm Deduction c. 10mm deduction SUMMARY FOR INSIDE MOUNT DEDUCTIONS: Width - 5mm. Drop 5mm. b. Outside Mount [Face Installation] SEE Fig 2. Measuring for outside mount is not so critical UNLESS there are obstructions to take into account. i. Measure at C from Outside of Architrave to Outside of Architrave. NO DEDUCTIONS NECESSARY. [Additional width can be applied to ensure fabric covers architrave. For Fabric to cover the architrave the width ordered needs to be approx 30 35mm wider than measurement C. ii. Measurement D is from top of architrave to bottom of architrave. No deductions necessary. SUMMARY FOR OUTSIDE MOUNT DEDUCTIONS: None necessary. Elegance Manual - Version Page 5

6 14. Installation Installation Brackets are Universal [Both Inside and Outside Mount]. Brackets may be installed at any point along the Cassette preferably at a secure fixing point. [For low strength fitting situations, additional brackets to the recommended are advised]. At least one bracket should be located as near as possible to the control end of the blind to support the chain operation of the blind. It is vital that the brackets are fitted perfectly horizontally otherwise the blind will roll up crooked and fray the fabric edges. Incorrect installation voids warranty on frayed fabric. 15. Cleaning a. Cassette and Bottom Rails. Aluminium Surfaces can be cleaned with a clean soft cloth and normal household mild cleaning agent. Caution: Do not allow cleaning agents to come in contact with Fabric. b. Fabric. DO NOT USE CHEMICAL CLEANERS ON ELEGANCE FABRIC. i. General Cleaning Your Elegance blind may gather dust and from time to time need cleaning. Use a hair dryer on cold to gently remove dust, or use an anti-static soft brush or cloth to gently attract dust from the fabric. ii. Spot Cleaning The Elegance fabric should be treated carefully and gently when spot cleaning. Use a damp cloth with a very mild detergent and gently dab the affected area. Harsh rubbing will remove the stiffening on the fabric and distort is surface. It is vital that the fabric not be creased during this process. 16. Dye Lot Minor dye lot variations will arise from time to time. Basic precautions should be taken. a. Within an order. If blinds are immediately next to each other in the one location, it is advisable to state this when ordering. b. Subsequent orders. Should the same colour fabric be ordered at a later date, it is expected that there will be a dye lot variation. c. Swatches. When a customer selects a colour, they should be reminded that dye lot variation can happen, and the dye lot of the swatch will not be exactly the dye lot of the finished blinds. 17. DISCLAIMER The recommendations in this Information Manual are a guide only. Individual interpretation based on specific jobs, will be necessary. Elegance Manual - Version Page 6