Pleated blinds, free hanging units FS, FK, FE Description

Transcription

1 Pleated blinds, free hanging units FS, FK, FE 7 FS FK 4 FE Application Anti-glare protection and visual privacy as well as protection against summer heat. For installation indoors, FS type (for vertical glass surfaces) can be used with a glass profile depth of 18 mm. Mounting with clip-on brackets made from spring steel. FS Polyester cord (standard length: 1000 mm) Locking of the blind at any given height using the integrated cord lock, plastic cord connector. Childproof sun shading when using a cord winder. FK Ball chain made of grey or white plastic (standard length: order height approx. 100 mm). Childproof sun shading when using a chain holder. FE 24 V motor, cable length 800 mm, optional plug-in connector (available for additional charge). An MSE pleated blind is required for each unit. For electrical accessories and circuit diagrams see "Control systems" tab. Types Free hanging units for vertical glazing (FS, FK and FE). Construction limit values in mm Type Maximum/minimum dimensions Order width Order height Surface area in m 2 min. max. min. max. max. FS Cord 150 FK Ball chain FE Electric drive 24 V= 600 Depending on fabric width. 444

2 Pleated blinds, free hanging units FS, FK, FE Cord brake ( Cord connector (2) Cord (3) Tension cable (4) Cord (5) Rails (6) Top rail (6. Bottom rail (6.2) Colour map aluminium parts Powder-coated RAL 9006 white aluminium Powder-coated RAL 8014 sepia brown Powder-coated in RAL 9016 Powder-coated to other colours in the RAL classic colour chart plastic parts grey white According to WAREMA colour assignment With the exception of camouflage and fluorescent colours. brackets plain Graphite (RAL 901 (RAL 9016) According to WAREMA colour assignment Curtain (7) Pleated Dimensions: fold width 20 mm Maximum distance between cords 400 mm Fabric quality grades and designs: to our current WAREMA collection. Special designs not included in the valid WAREMA collection are only available upon request and are subject to surcharge. Ball chain drive (8) End caps (9) Ball chain (10) Electrical connection (1 Cord winder (12) Ball chain bracket (13) Lateral guiding (optional, surcharge applies) Cable Strand wire, fixing with tension device for tilt windows up to 15 inclination from vertical steel, corrosion-resistant Sheathing: plastic, UV-stable Dimensions (Ø): 0.9 mm Clip-on bracket spring steel, corrosion-resistant Plastic parts plain or also available as in RAL 9016, RAL 9011 graphite white, grey and Colours Aluminium parts with chrome-free pretreatment are to latest RAL classic colour chart (with the exception of camouflage and fluorescent colours) or are available in DB 701, 702, 703 as well as eight textured colours (W4914 W492, four colours with simulated anodised finish (WC31 WC34) as well as additional colours in accordance with the WAREMA standard colour range (in WAREMA colour specification). Other colour specifications and special colours are available on demand for an additional charge. 445

3 Pleated blinds, sloped units S1, S2 S Application Anti-glare protection and visual privacy as well as protection against summer heat. For installation indoors, with a glass profile depth of 18 mm. Mounting with clip-on brackets made from spring steel. S1/S2 Polyester cord Standard cord length: Position of controller: order height mm S1 large order height (standard) S2 as shown Locking of the blind at any given height using cord lock, cord outlet at the front. For S2 models the cord length on the lower side is adapted to the ordering height. Childproof sun shading when using a cord winder. 1.3 S2 6 Types S1 Free hanging unit for vertical gable windows with an inclination of 5-35 from horizontal. Not available with lateral guiding. Cord also available for smaller heights. S2 Freely suspended blind for vertical gable windows with an inclination of 5 50 from horizontal, with rectangular and triangular section of the sun shading product operated separately (operated alternately). Not available with lateral guiding. Construction limit values in mm Type S1 35 slope S2 15 slope S2 30 slope Cord S2 45 slope S2 50 slope Refers to the length of the bottom rail 2) Depending on fabric width. Maximum/minimum dimensions Order width Order height Surface area in m 2 min. max. min. max. max ) ) )

4 Pleated blinds, sloped units S1, S2 Rails ( Top rail (1. Centre rail (1.2) Bottom rail (1.3) Cord brake (2) End cap (3) Cord (4) Cord connector (5) Cord (6) Curtain (7) Pleated Dimensions: fold width 20 mm Maximum distance between cords 400 mm Fabric quality grades and designs: to our current WAREMA collection. Special designs not included in the valid WAREMA collection are only available upon request and are subject to surcharge. Cord winder (8) Clip-on bracket spring steel, corrosion-resistant plain or optionally in RAL 9016, RAL 9011 graphite Colour map aluminium parts Powder-coated RAL 9006 white aluminium Powder-coated RAL 8014 sepia brown Powder-coated in RAL 9016 Powder-coated to other colours in the RAL classic colour chart plastic parts grey white With the exception of camouflage and fluorescent colours. brackets plain Graphite (RAL 901 (RAL 9016) Plastic parts white, grey and Colours Aluminium parts with chrome-free pretreatment are to latest RAL classic colour chart (with the exception of camouflage and fluorescent colours) or are available in DB 701, 702, 703 as well as eight textured colours (W4914 W492, four colours with simulated anodised finish (WC31 WC34) as well as additional colours in accordance with the WAREMA standard colour range (in WAREMA colour specification). Other colour specifications and special colours are available on demand for an additional charge. 447

5 Pleated blinds, tensioned units VS 01, VS 02, VS 03 VS 01 VS Application Anti-glare protection and visual privacy as well as protection against summer heat. For installation indoors, with a glass profile depth of 18 mm. Mounting with clip-on brackets made from spring steel. VS 01/02/03 Operating rail with handle For situations with restricted access a rod can be used for alternative operation (subject to surcharge) VS 03 Types VS 01 With tension wires, for vertical glazing and sloping glazing up to max. 15 from vertical. VS 02 As described above, but with 2 operating rails. VS 03 As described above, but with 2 operating rails and 2 blinds. Construction limit values in mm Type VS 01 VS 02 Handle or bar VS 03 Maximum/minimum dimensions Order width Order height Surface area in m 2 min. max. min. max. max (up to 1200 (up to 1200 (up to ) 2200) 2200)

6 Pleated blinds, tensioned units VS 01, VS 02, VS 03 Rails ( Top rail (1. Operating rail (1.2) Curtain (2) Pleated Dimensions: fold width 20 mm Maximum distance between cords 300 mm Fabric quality grades and designs: to our current WAREMA collection. Special designs not included in the valid WAREMA collection are only available upon request and are subject to surcharge. End cap (3) Tension cord (4) Tension device (5) Handle for operation (6) Tension rail (optional, subject to surcharge) Mounting element: plastic, (for additional charge) The unit can only be mounted on the ceiling if the tensioning rail is used. Clip-on bracket spring steel, corrosion-resistant plain or optionally in RAL 9016, RAL 9011 graphite Colour map aluminium parts Powder-coated RAL 9006 white aluminium Powder-coated RAL 8014 sepia brown Powder-coated in RAL 9016 Powder-coated to other colours in the RAL classic colour chart plastic parts grey white With the exception of camouflage and fluorescent colours. brackets plain Graphite (RAL 901 (RAL 9016) Plastic parts white, grey and Colours Aluminium parts with chrome-free pretreatment are to latest RAL classic colour chart (with the exception of camouflage and fluorescent colours) or are available in DB 701, 702, 703 as well as eight textured colours (W4914 W492, four colours with simulated anodised finish (WC31 WC34) as well as additional colours in accordance with the WAREMA standard colour range (in WAREMA colour specification). Other colour specifications and special colours are available on demand for an additional charge. 449

7 Pleated blinds, tensioned units VS 10, VS 20, VS 30 Design VS 10 3 VS Application Anti-glare protection and visual privacy as well as protection against summer heat. For installation indoors, with a glass profile depth of 18 mm. Mounting with clip-on brackets made from spring steel. VS 10/20/30 Operating rail with handle For situations with restricted access a rod can be used for alternative operation (subject to surcharge) VS 30 Types VS 10 With tension wires, for vertical glazing and sloping glazing up to max. 60 from vertical. VS 20 As described above but with 2 operating rails and 1 tension rail (top). Only soffit installation possible. VS 30 As described above, but with 2 operating rails and 2 blinds. Construction limit values in mm Type VS 10 VS 20 VS 30 Handle or bar Maximum/minimum dimensions Order width Order height Surface area in m 2 min. max. min. max. max

8 Pleated blinds, tensioned units VS 10, VS 20, VS 30 Rails ( Top rail (1. Operating rail (1.2) Curtain (2) Pleated Dimensions: fold width 20 mm Maximum distance between cords 300 mm Fabric quality grades and designs: to our current WAREMA collection. Special designs not included in the valid WAREMA collection are only available upon request and are subject to surcharge. Please note the directions concerning the suitability of the ceiling windows and skylights for our collections. End cap (3) Tension cord (4) Tension cable (5) Handle for operation (6) Tension device (7) Tension cable (8) Mounting element: plastic, (for additional charge) For model VS 20 the tension rail at the top is standard. The unit can only be mounted on the ceiling if the tensioning rail is used. Lateral guidance Cable Wire strand steel, corrosion-resistant Sheathing: plastic, UV-stable Dimensions (Ø): 0,9 mm Tension cord and tension wire mounting using plastic tension device. Clip-on bracket spring steel, corrosion-resistant plain or optionally in RAL 9016, RAL 9011 graphite Colour map aluminium parts Powder-coated RAL 9006 white aluminium Powder-coated RAL 8014 sepia brown Powder-coated in RAL 9016 Powder-coated to other colours in the RAL classic colour chart plastic parts grey white With the exception of camouflage and fluorescent colours. brackets plain Graphite (RAL 901 (RAL 9016) Plastic parts white, grey and Colours Aluminium parts with chrome-free pretreatment are to latest RAL classic colour chart (with the exception of camouflage and fluorescent colours) or are available in DB 701, 702, 703 as well as eight textured colours (W4914 W492, four colours with simulated anodised finish (WC31 WC34) as well as additional colours in accordance with the WAREMA standard colour range (in WAREMA colour specification). Other colour specifications and special colours are available on demand for an additional charge. 451

9 Pleated blinds, ceiling unit PB, PK, PE PB Application Anti-glare protection and visual privacy as well as protection against summer heat for sloping and asymmetrical glazing. For indoor installation. Type PB can be used with a glass profile depth 18 mm. Mounting with clip-on brackets made from spring steel. PK PE 1.3 PB Handle Position of controller: central For situations with restricted access a rod can be used for alternative operation (subject to surcharge). For higher mounted units we recommend model PE. The order height of the unit reduces in relation to the angle of inclination up to the vertical plane at 2600 mm. PK Crank Position of controller: central The unit can also be rotated by 180 (running from bottom to top). PE 24 V motor An MSE pleated blind is required for each unit. For electrical accessories and circuit diagrams see the "Control systems" tab. The unit can also be rotated by 180 (running from bottom to top). Cable length: 800 mm Plug-in connector: optional, available for additional charge Types Guided units for sloping and asymmetrical glazing (PB, PK, PE). Construction limit values (for horizontal installation) in mm Maximum/minimum dimensions Type Order width Order height Surface area in m 2 min. max. min. max. max. PB Handle or rod (detachable) 200 PK Detachable crank PE Electric drive 24 V= 360 Max. values apply for horizontal installation. When installed vertically, the maximum possible order height is 2600 mm. 452

10 Pleated blinds, ceiling unit PB, PK, PE Rails ( Top rail (1. Operating rail (1.2) Bottom rail (1.3) Tension cable (2) Wire strand steel, corrosion-resistant Sheathing: plastic, UV-stable Dimensions (Ø): 0.9 mm Number of tension wires depends on the width (approx. every 250 mm). These are visible when the blind is raised. End caps (3) Handle for operation (4) Curtain (5) Pleated Dimensions: fold width 20 mm Maximum distance between cords 250 mm Fabric quality grades and designs: to our current WAREMA collection. Special designs not included in the valid WAREMA collection are only available upon request and are subject to surcharge. Please note the directions concerning the suitability of the ceiling windows and skylights for our collections. Crank mounting bracket (6) Electrical connection (7) Clip-on bracket spring steel, corrosion-resistant plain or optionally in RAL 9016, RAL 9011 graphite Colour map aluminium parts Powder-coated RAL 9006 white aluminium Powder-coated RAL 8014 sepia brown Powder-coated in RAL 9016 Powder-coated to other colours in the RAL classic colour chart plastic parts grey white With the exception of camouflage and fluorescent colours. brackets plain Graphite (RAL 901 (RAL 9016) Plastic parts white, grey and Colours Aluminium parts with chrome-free pretreatment are to latest RAL classic colour chart (with the exception of camouflage and fluorescent colours) or are available in DB 701, 702, 703 as well as eight textured colours (W4914 W492, four colours with simulated anodised finish (WC31 WC34) as well as additional colours in accordance with the WAREMA standard colour range (in WAREMA colour specification). Other colour specifications and special colours are available on demand for an additional charge. 453

11 Pleated blinds, special shapes XT 1, XT 2, XT 5 XT 1 XT Application Anti-glare protection and visual privacy as well as protection against summer heat. For indoor installation. Mounting with clip-on brackets made from spring steel XT 5 Operating rail with handle For situations with restricted access a rod can be used for alternative operation (subject to surcharge). Types XT 1 for vertical, asymmetrical and sloping trapezoid areas with one diagonal side. XT 2 for trapezoid areas with two diagonal sides. XT 5 for trapezoid areas with one diagonal side and a rectangular section (pentagon). Construction limit values in mm Type XT 1 XT 2 XT 5 Handle or bar Maximum/minimum dimensions Order width Order height Surface area in m 2 min. max. min. max. max (up to 1200) (2000)

12 Pleated blinds, special shapes XT 1, XT 2, XT 5 Rails ( Top rail (1. Operating rail (1.2) Bottom rail (1.3) Handle for operation (2) End cap (3) Curtain (4) Pleated Dimensions: fold width 20 mm Fabric quality grades and designs: to our current WAREMA collection. Special designs not included in the valid WAREMA collection are only available upon request and are subject to surcharge. Please note the directions concerning the suitability of the ceiling windows and skylights for our collections. Tension cable (5) Wire strand steel, corrosion-resistant Sheathing: plastic, UV-stable Dimensions (Ø): 0,9 mm Number of tension wires depends on the width (approx. every 250 mm). These are visible when the blind is raised. If a "vertical" installation situation is specified in the order, the internal bracing wires are omitted. Clip-on bracket spring steel, corrosion-resistant plain or optionally in RAL 9016, RAL 9011 graphite Colour map aluminium parts Powder-coated RAL 9006 white aluminium Powder-coated RAL 8014 sepia brown Powder-coated in RAL 9016 Powder-coated to other colours in the RAL classic colour chart plastic parts grey white With the exception of camouflage and fluorescent colours. brackets plain Graphite (RAL 901 (RAL 9016) Plastic parts white, grey and Colours Aluminium parts with chrome-free pretreatment are to latest RAL classic colour chart (with the exception of camouflage and fluorescent colours) or are available in DB 701, 702, 703 as well as eight textured colours (W4914 W492, four colours with simulated anodised finish (WC31 WC34) as well as additional colours in accordance with the WAREMA standard colour range (in WAREMA colour specification). Other colour specifications and special colours are available on demand for an additional charge. 455

13 Pleated blinds special shapes, additional options /measuring instructions Other special shapes, such as the units described below, are available. For further inquiries, please consult our customer centre and provide us with detailed drawings/sketches. XR 1 with cord (high side) Size range: min. sloped width: 300 mm max. sloped width: 2000 mm Locking of blind height same as S 1/S 2 Wall and ceiling installation possible XR 3 XR 4 Application Glare protection and visual privacy as well as protection against summer heat for indoor use. Mounting with clip-on brackets made from spring steel. Types XR 1 movable model available : with cord and cord outlet at front on the high side, sun shading system is made childproof by means of a cord winder. Installation: wall and ceiling Height locking as for S1/S2, page Pleated blinds, sloped units S1, S2 on page 446. XR 3 fixed, no operation possible Stabilisation: hooks and eyelets Installation: wall and ceiling, with eyelets in curved section XR 4 fixed, available as triangular and other special shapes on request, no operation possible Fabric Pleated Dimensions: fold width 20 mm Fabric quality grades and designs: to our current WAREMA collection. Special designs not included in the valid WAREMA collection are only available upon request and are subject to surcharge. Please note the directions concerning the suitability of the ceiling windows and skylights for our collections. Rails and profiles Clip-on bracket spring steel, corrosion-resistant plain or optionally in RAL 9016, RAL 9011 graphite Plastic parts white, grey and Fixed Half width = radius Size range: min. order width: 300 mm max. order width: mm min. order height: 300 mm max. order height: 750 mm Installation on wall and ceiling possible (with eyelets in curved section) 456 Fixed, available as triangle and other special shapes on request. Size range: min. order width: 300 mm max. order width: mm min. order height: 300 mm max. order height: mm Colours Aluminium parts with chrome-free pretreatment are to latest RAL classic colour chart (with the exception of camouflage and fluorescent colours) or are available in DB 701, 702, 703 as well as eight textured colours (W4914 W492, four colours with simulated anodised finish (WC31 WC34) as well as additional colours in accordance with the WAREMA standard colour range (in WAREMA colour specification). Other colour specifications and special colours are available on demand for an additional charge. Colour map aluminium parts Powder-coated RAL 9006 white aluminium Powder-coated RAL 8014 sepia brown Powder-coated in RAL 9016 Powder-coated to other colours in the RAL classic colour chart plastic parts grey white With the exception of camouflage and fluorescent colours. brackets plain Graphite (RAL 901 (RAL 9016)

14 Pleated blinds, ceiling units and special shapes Notes regarding installation in conservatories and sloped areas Air circulation Installation example for spacing and ventilation slots with mounting profile Sufficient ventilation as well as air circulation are a pre-condition for proper functioning of sun shading in conservatories and sloping areas. Air supply and extraction If the conservatory is not sufficiently ventilated, condensation may form. WAREMA cannot accept responsibility for any damage to the fabric due to dripping condensation or strong glass cleaning agents which come into direct or indirect contact with the fabric. Mounting distance for sufficient air circulation Minimum distance: 100 mm between pleated blind and glazing 50 mm between mounting profile and wall Please make allowance for ventilation slots at the top and bottom. Measuring guide Bestellhöhe Order height i i cos PL installation clearance 457