PRODUCT INFORMATION MANUAL SECTION: 3 VERI SHADES VERI SHADES

Transcription

1 VERI SHADES

2 Where innovation meets style and functionality. A contemporary take on a classic window covering, Veri Shades combines the versatility of a vertical blind with the elegant appeal of a soft window furnishing. Featuring the premium EDGE Vertical Track system and soft Veri Shades fabric, the new Veri Shades collection provides the perfect balance of style, durability and child safety features to complement any home interior style and living needs. Unique Design Individually curved fabric vanes feature an alternating light filtering and room darkening fabric panel. Simply turn the fabric vanes for sheer light control or total privacy. Child Safe Designed with child safety in mind, Veri Shades fabric has no connecting bottom chains or weights, providing a safer home environment for children and pets. Functional Living For seamless indoor-outdoor living, conveniently walk through the individual fabric vanes whether they are opened or closed. Easy Breezy Free from noisy connecting chains and bottom weights, Veri Shades operates quietly and softly settles back into position. REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 2 OF 13

3 Featuring the Australian designed and developed EDGE Vertical System, Veri Shades offers a premium hardware and operating system for ultimate performance, durability and smooth control. Available with two operating options: Chain and Cord or Traversing Wand, Veri Shades fabric can be easily tilted with option to stack to the left, right or split stack for an unobstructed view. Uniform Appearance Seamless colour coordination between fabric and hardware for a cohesive interior look. The modern headrail design is available in 6 matching colours (anodised, white, birch white, stoney beige, gunmetal and black). Chain & Cord Operation Featuring a heavy duty roller blind chain and cord (available in 4 colours white, ivory, grey & black), the beaded chain allows you to rotate the fabric vanes to the desired position, while the cord can be used to stack the shade. Traversing Wand Operation For a cordless and enhanced child safe solution, opt for the Traversing Wand operation (available in 4 colours: white, anodised, gunmetal and black). Using just one hand, simply rotate the fabric blades and draw the vanes across. Total Light Control Take advantage of beautiful light control with Veri Shades. The soft vertical fabric provides daytime privacy whilst allowing a soft view through. Easily adjust the level of privacy and light to suit your requirements by rotating the fabric vanes halfway. To block light, close the shades completely. Durable Qualities Made from 100% polyester, Veri Shades fabric offers durable properties such as fade resistance and Ultra Violet (UV) protection to help preserve the fabric and home furnishings from fading. Easy Maintenance With dirt and dust resistant properties, maintenance is made easy. Simply dust, spot clean or gently detach Veri Shades fabric vanes from the track to hand wash. REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 3 OF 13

4 Standard & Net Range Features & Benefits Series Classic Opacity Featuring alternating opacity fabric folds: light filtering when opened or room darkening when closed. Colour Range Standard and Net range are available in 6 contemporary colours. Dirt Resistant Treated to effectively repel dust and grime for easy maintenance. Fade Resistant All colours meet Australian Standards for colour fastness to resist fading (AS ). Care & Cleaning Dusting Surface dust can be easily removed using a clean soft brush or feather duster. Spot cleaning To remove dirt and grime, simply wipe the fabric blades with a sponge soaked in lukewarm water. If marks are still visible, add a little mild detergent and gently dry with a clean cloth. Hand wash Veri Shades fabric can be lightly hand washed and dried, and can also be ironed with a cool iron or steamed to remove creases. To remove Veri Shades fabric, gently unhook the fabric blade by lifting up and out of the hook. UV Protection UV stabilised fabric material features an Ultraviolet Protection Factor (UPF) of Year Warranty # Enjoy total piece of mind with a 5 year warranty #. 2 3 Standard & Net Range Technical Specifications 1 Composition 100% Polyester Woven Fabric Colour Fastness 7-8 Blue Scale Fabric Weight 268 g/m² Fabric Thickness 0.80 mm Size Limitations Minimum Drop: 1000mm Maximum Drop: 3600mm Minimum Width: 1000mm Maximum Width: 5950mm REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 4 OF 13

5 MEASURING AND LIMITATIONS Architrave & Reveal Face & Reveal Bays WIDTH -160 WIDTH -80 WIDTH TO DESIRED DROP mm minimum or to desired drop. WIDTH -80 WIDTH -160 WIDTH -80 Note: Reveal fit application is not ideal as the appearance of the shade is affected by side light gaps. Factory Deduction Made To All Orders for Face Fix and Reveal: Opening Width Size: = -3mm Opening Drop Size: = -15mm Corners WIDTH -0 WIDTH -200 WIDTH -200 OPTIONS & LIMITATIONS Veri Shades MINIMUM DROP MINIMUM WIDTH MAXIMUM WIDTH MAXIMUM DROP 1000mm 1000mm 5950mm 3600mm MAXIMUM AREA 21m² REVEAL DEPTH FULLY RECESSED BOX MOUNT BRACKET SIZE ON FACE FIX MINIMUM SURFACE MOUNT ON FACE FABRIC OVERLAP STACK CALCULATIONS TRACK DIMENSIONS HEIGHT DEPTH 200mm 220mm 102mm 50mm 25mm Approximately 10% of Track Width 25mm 46mm There will be a distance from the end of the track to the finish position of the wand for the left & right stack of wand control. Light Gap from top of vane to bottom of track 25 mm Available Wand Size: 750mm & 1250mm in White, Anodised, Black & Gunmetal. Available Fabric Colours: Standard: White, Soft White, Ivory, Beige, Slate, & Charcoal Nett: White, Soft White, Ivory, Beige, Slate, & Charcoal The non control end will finish short of the track due to vane requirement for closing. STACKING OPTIONS LEFT RIGHT SPLIT Wand or Chain & Cord Chain & Cord only Single side control only NOTE The wand will provide a smoother operation than the chain and cord due to the fabric weight of this product. The gap for split stack is approximately 10-15mm when the vane is open due to the finish fold of the end vane. Due to the fabrics elegant nature, the light gap will vary as you go down the vane. REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 5 OF 13

6 Bracket Options Measuring 20mm 35mm 102mm 94mm 43mm 44mm 26mm 33mm Clip-In Mounting Bracket XXX 102mm Face Fit Mounting Bracket *Available in 6 Colours Zinc, Stoney Beige, White Birch, White, Gunmetal & Black Optional Mounting Plate Specify if required *Available in 6 Colours Zinc, Stoney Beige, White Birch, White, Gunmetal & Black. TRACK OPTIONS Colours NOTE CONTROL OPTIONS Anodised, White, Stoney Beige, Birch White, Black & Gunmetal. All Veri Shades are manufactured on the Edge vertical system. Veri Shade is setup to automatically default to the appropriate hardware colour to match the fabric. Selecting your own headrail colour is also available. Hardware will match the headrail. Traversing Wand Colour: White/Anodised/Black/Gunmetal Standard Length: 750mm & 1250mm Chain & Cord Cord Colour: White/Black/Grey/Magnolia Chain Colour: White/Black/Grey/Magnolia (continuous loops- refer to below for sizes) BLIND DROP CHAIN & CORD CONTROL LENGTH MM 750 MM 750 MM MM 1000 MM 750 MM MM 1250 MM 750 MM MM 1500 MM 1250 MM MM 1750 MM 1250 MM MM 2000 MM 1250 MM >2700 MM 2000 MM 1250 MM TRAVERSING WAND CONTROL LENGTH Note: Drops that require chain longer than 2000mm must be noted on the order form and are only available in white. A chain and cord tensioner will be supplied with all chain and cord Veri Shades. FABRIC ONLY (MIN DROP 1000MM) All Fabrics Note: Fabric drop required when ordering. $16.00 per metre of drop/per panel CALCULATION FOR NUMBER OF FABRIC BLADES Fabric Blades = [Width(mm)] / 102 (roundup) REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 6 OF 13

7 PRODUCT INFORMATION MANUAL SECTION: 3 VERI SHADES TRAVERSING WAND CHAIN & CORD CONTROL PLACEMENT - WAND/CHAIN & CORD Chain & Cord: Blades stack on same side for split stack, choose left or right control. Travelling Wand: blades stack on side opposite wand. (Single side stack only) Left Stack Right Stack BLADE CLOSURE GAP Split Stack Vane Closure Gap Blades are designed to overlap 25mm for privacy. Light leakage may occur due to the closure gap, which may increase with the length of the blade. The closure gap is most visible when viewed from the side. It is a normal, inherent characteristic of the product and should not be considered a defect. Blade closure is tighter in one direction than the other when the blades are rotated closed. Split Stack centre Gap up to 10-15mm SPLIT STACK CENTRE GAP The gap distance between fabric panels of split stack design when open is approximately 10-15mm. REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 7 OF 13

8 VERI SHADES INSTALLATION, OPERATING AND CARE INSTRUCTIONS MATERIAL AND TOOLS Each Veri Shades ordered should include: Mounting clips (Number depends on size) Mounting brackets (if face fixed) 3 screws for each bracket (20mm x 6# Panhead) (Face Fit) Cord tensioner and screw (If cord/chain) TOOLS REQUIRED Steel measuring tape Carpenter s level Power or battery drill and bits Flat blade and Phillips head screwdrivers INSTALLATION METHOD The Veri Shades may be installed in Reveal (inside the window frame) or Face (outside the window frame), this determines the type of brackets to be used. The 102mm mounting bracket is used for all Veri Shades blinds. If required to extend the Veri Shades out from the wall the optional mounting plate can also be used. 102mm Bracket optional Mounting plate IMPORTANT: Please read these instructions all the way through before installing REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 8 OF 13

9 REVEAL FIT (INSIDE MOUNT) The Veri Shades should be installed into the recess as far as possible, while still allowing sufficient clearance for the vanes to rotate freely. 45mm to bottom end of hook 15MM FOR TIMBER 25MM FOR MASONARY Optional Mounting plates may be used to extend the position of the headrail mounting clips to a point outside of the reveal where required (must be ordered). BRACKET/CLIP SPACING Mountings should be within 200mm of the ends of the head channel and not more than 1 metre apart. 200mm 1 metre maximum 1 metre maximum 200mm For stacking side add an extra bracket for support. FACE FIT (OUTSIDE MOUNT) First measure the track and mark on the face or architrave of the window where to attach the brackets. Secondly, check the drop (length) of the Veri Shades and mark the height on the wall or architrave, allowing for clearance. Attach the brackets by using (20mm x 6# Panheads) screws supplied. Minimum 3 screws per bracket. REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 9 OF 13

10 BRICK OR RENDERED SURFACES Warning: Ensure you drill no closer than 25mm from the edge of these surfaces as you may chip or breakout the brick or render. 25mm 25mm INSTALLING THE TRACK Check to see what side the control is on before proceeding. Hold track up to the brackets ensuring front edge lip of the track engages into the lip of the bracket, twist up and backwards to snap the track on to the bracket. Note: Longer tracks will require you to snap each bracket in turn. Back ATTACHING THE SLATS With the track in a stacked position, ensure the carrier hooks are in an open position. This makes it easier to attach vanes. Lay your vanes over your shoulder. Taking one at a time, fabric will be supplied flat, rolled with two plastic clips fitted to both sides of the fabric panel. Each fabric panel clips to the next, clipping the two vanes together. Note the two end vanes will only have one clip. Wrap the fabric around the clip and attach with the provided double sided tape. Make sure the sheer side is facing to the inside of the room to give a uniform look. Push each slat into its hook. You should feel it click into position. click Front REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 10 OF 13

11 INSTALLING THE CORD & CHAIN TENSIONER After the blind has been securely mounted to the window, mount the cord tensioner to the reveal of the window opening (inside mount) or to the face of the wall (outside mount). Determine the correct mounting option as shown below. Important: Locate the tensioner as close to the window as possible to minimise accessibility by children and pets. Ensure the device is secured so that the cords are tensioned while still allowing the blind to be operated. Chain Tensioner OPTION A INSIDE MOUNT (1 SCREW) OPTION B INSIDE MOUNT (3 SCREWS) OPTION C OUTSIDE MOUNT (3 SCREWS) Attach the chain tensioner 1600mm above floor level. CARE AND CLEANING 1. For the removal of dirt and grime, simply wipe fabric blades with a sponge soaked in lukewarm water and a little mild detergent or occasional brushing with a soft brush or feather duster is sufficient also. 2. There can be significant variations between fabrics used in Veri Shades, therefore we recommend that you clean a small area as a test first. 3. Proper care and maintenance will increase the life of your investment. The surface of Veri Shades fabric and tracks will collect a layer of dust over time. Veri Shades fabric can be lightly hand washed and dried and can also be ironed with a cool iron or steamed to remove creases. Veri Shades tracks can be cleaned with a feather duster, or a slightly damp microfibre cloth to ensure the components are also dust free. CAUTION: Never use harsh cloths, harsh abrasives, chlorine or ammonia based chemicals or cleaners on any Veri Shades surface as they may affect the appearance, longevity and warranty of the product On the stack side of your blinds the end attachment can be unhooked in order to stack back the fabric to clean the window. REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 11 OF 13

12 OPERATION Veri Shade: Blinds operate as per the Vertical Edge Blinds. The Chain: Controls the tilting of the Veri Shades and should be tilted several times to ensure it opens and closes correctly. The Cord: Traverses the vanes clear of the window allowing access for opening a window or cleaning. The Wand: Controls the tilting of the Veri Shades and traverses the vanes clear of the window allowing access for opening & closing or cleaning. Before traversing the vanes ensure they are tilted (opened) to the window. REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 12 OF 13

13 PROTECTING YOUR CHILDREN Please be aware that blind cords or chains pose a strangulation hazard for children. To reduce the risk of strangulation this internal window covering must be installed in such a way that a loose cord cannot form a loop 220 mm or longer at a height of less than 1600mm above floor level. If your shade is provided with cord operation, it is essential that the following installation instructions are adhered to: The cord may be installed lower than 1600mm above floor level if the cord is sufficiently secured or tensioned to prevent a loop of 220mm or longer being formed; If a cord is installed lower than 1600mm above floor level it must be fitted to prevent a child from being able to remove the cords. A If your blind is provided with a cord cleat, it is essential that the following installation instructions are adhered to: If a cleat is used to secure the cord, it must be at least 1600mm above floor level to prevent children from unwinding the cord from the cleat. This pack includes the following child safety devices for control options that use chain and cord. Cord Tension Device B Cord Tension Hardware SAFETY DEVICES max These safety devices are suitable for installation onto the following surfaces: max Timber Aluminium Gyproc (Spring Toggle) Brick (Wall Plug) NOTE: The Spring Toggle and Wall Plug are not included in this pack. CHILD SAFETY INSTALLATION INSTRUCTIONS C Be aware that it is possible for children to strangle in window covering cords and chains. To reduce the possibility of such an accident, all cords and chains must be kept out of reach of children, including infants. Cord and chain tensioners are an effective way you implement this essential precaution. DIN 7981 min. min. 1, m m 2 REPLACES ISSUE DATE: JANUARY 2018 APPROVED BY: J. TAN PAGE 13 OF 13