Staining and Finishing Concrete Floors [1]

Size: px

Start display at page:

Download "Staining and Finishing Concrete Floors [1]"

Lesley Skinner
6 years ago
Views:

1 [1] Submitted by Ana White [2] on Fri, :43 Page 1 of 30

2 [1] Page 2 of 30

3 One of my favorite projects on the Momplex interior has been this basement floor we coated: Page 3 of 30

4 Page 4 of 30

5 For this floor, we used RustOleum's EpoxyShield Garage Floor Coating [3]. It's a paint, and you throw the speckles down to add variation. We are extremely pleased with the durability of the floor - not a scratch in it after about six months of use! We like floor paint/coatings for basements for a number of reasons: - It seals your concrete (something you'd have to do anyways) - It bonds on the concrete floor (no hollow feel underfoot if you'd used a floating floor) - We have heated floors in the basement, so any flooring (especially the likes of carpet) would prevent heat from entering the room - You don't have to add a self leveling layer of concrete (every slab has a few imperfections, and you'd have to self level for most floating floors) - There's no added layer of flooring for water to get trapped underneath and cause moisture problems - It's about as inexpensive as flooring gets - about 30 to 40 CENTS a square foot for everything! So on Momplex Unit A's basement and garage, we knew we'd be going straight back to RustOleum's EpoxyShield products [4], but this time, I wanted to try the stained concrete instead of the painted concrete. Page 5 of 30

6 It's a two part kit - the Premium Clear Floor Coating Kit [5] (that you can actually use OVER the paint kit we used on Unit B) that you mix the stain additive [6] into. All this is available at your local big box store, Page 6 of 30

7 one set will do about 250 square feet of bare concrete for the stain. You can also use this over bare concrete if a gray floor is your goal, but you want the floor to be finished with an epoxy coating to resist staining. In the kit is a DVD, with step by step instructions - we popped that in and watched it. Here's the video steps - So we waited for a warm weather weekend (you only need a couple of hours to do the work, but we wanted to have the windows open until it's Page 7 of 30

8 all dry), and got to work. First we cleaned everything out of the garage, mudroom and bonus room. Page 8 of 30

9 The concrete is very level, and doesn't need patching and there's no cracks (nice job Jacob! [7]) but there are a few spots where paint has gotten on the floor. Page 9 of 30

10 I put one of those scrubbing discs on my Ryobi Cordless Sander, and took care of that pretty quick. Page 10 of 30

11 Then it's time to clean the floor - First we vacuumed, Page 11 of 30

12 Then we mopped. Then we etched (it comes with the stain additive) Page 12 of 30

13 And finally we are ready for painting!!! Page 13 of 30

14 The kit has everything, you just follow directions and mix Part A with Part B, then add the stain additive, Page 14 of 30

15 We also added in the non-skid additive. Kids and Grandmas on a shiny, smooth epoxy floor sounds like a very bad combination. Page 15 of 30

16 Then we prepped the roller with the included roller bag and rubber bands (comes with stain additive kit). This will help give the color application a more random finish (kinda batik-ish if you ask me). To me, color variation is very desirable on a floor. It's more forgiving between floor cleanings (didn't I look like I just love vacuuming??? ) and will hide any scratches (if you can ever scratch this stuff). Page 16 of 30

17 Once the kit was all mixed up, we've got 90 minutes to use it up. And about that long until the baby needs to be fed. So we worked quickly, with a clear plan from the start. Page 17 of 30

18 First, we used a brush to edge the walls and doorways. We actually Page 18 of 30

19 needed three kits to do the entire lower level, but we only edged one room at a time to not get too far ahead of ourselves. Page 19 of 30

20 Then we got two rollers going. It's kinda takes a bit of getting used to rolling with the roller covered in plastic. But I tell you what - applying paint with a roller on an extension stick sure beats crawling around on your knees snapping flooring together. One thing I will say is let go of your OCD and try not to be perfect. You'll want to work the paint in so there's no lap marks. Page 20 of 30

21 I found working in a fan shape was ideal. Page 21 of 30

22 It took us about two hours to roll the entire lower level. Page 22 of 30

23 Page 23 of 30

24 We used the Rustic Brown Stain Additive, and it is more of a warm brown that matched our stained doors. [8] If you are looking for more of an espresso brown, I'd go with the Walnut Stain Additive. Page 24 of 30

25 Page 25 of 30

26 We did the garage too. It turned out beautiful! Page 26 of 30

27 Page 27 of 30

28 It's got an almost rubber feel to it, but is super tough (don't tell on me, but I did try to chip it up with a hammer claw without success). We are very pleased with how this floor turned out! Here's the before: Chalky and porous, and definitely not wipe clean... Page 28 of 30

29 Finished and fine, smooth and easy to clean. We spent a total of about $300 on 700 square feet, and are very happy with the results! It took us a couple of days, between cleaning, prepping, etching, and application, but the results are definitely worth it! Have you coated a concrete floor? Love it? Let us know in the comments - we'd love to hear your side too! Have a great weekend! XO Ana + Family main_category: Momplex [9] Sponsor Box: <script type="text/javascript" src=" memedia.com/script_serve.php?st=hhm.anawhite&zn=lowes&sz=300x 60"></script> Page 29 of 30

30 Momplex: Flooring [10] Source URL: Links [1] -concrete-floors [2] [3] angid=-1&storeid=10051&n=5yc1vzbbbpz12l3&r= [4] hield [5] hield/garage-concrete-floor-coatings/low-voc-premium-clear-coating [6] hield/concrete-accessories-and-additives/stain-additive-for-premium-cle ar/ [7] &source=web&cd=2&cad=rja&uact=8&ved= 0CDIQFjAB&url=http%3A%2F%2Fana-white.com%2F2011%2F09% 2Fmomplex%2Fpouring-monolithic-momplex-slab&ei=qgltU4vgL83 joasq74dqdg&usg=afqjcngwyu6lgxptkcrrxj7abxa_b2zsng&am p;sig2=jlnjplw78jhp27av8mzlwg&bvm=bv ,d.cgu [8] [9] [10] Page 30 of 30

Ultimate Wood Staining Guide [1]

Ultimate Wood Staining Guide [1] [1] Submitted by Ana White [2] on Mon, 2016-03-14 13:04 [1] Hello DIY Friends! We are on the finishing stretch of our Tiny House project [3], and we can't wait to share all the projects with you. The finishing