Model No.: LV550HH Hybrid Ultrasonic Humidifier Questions or or Concerns? Please contact us Monday Mon-Fri 9:00AM-5:00PM - Friday am - PST 5:00 pm PST at support@levoit.com (888) 726-8520 email or at support@levoit.com (888) 726-8520. 1
THANK YOU FOR PURCHASING THE LV550HH HYBRID ULTRASONIC HUMIDIFIER BY LEVOIT! Should you have any questions or concerns regarding your new product, feel free to reach out to us at support@levoit.com. We hope you enjoy your new product! GET STYLE INSPIRATION Find @LevoitLifestyle on social media for wellness + style inspiration. We make every space mindful and chic. @LevoitLifestyle #LevoitLove #LevoitLifestyle
TABLE OF CONTENTS PACKAGE CONTENTS Package Contents Specifications Safety Information Getting to Know Your Humidifier LCD Display Control Panel Getting Started Operation General Operation Button Controls Humidity Sensor Automatic Shut Off Memory Function Using the Aroma Box Preventing Water Leaks Keeping Things Clean General Cleaning Cleaning the Aroma Pad Disinfecting the Humidifier Replacing the Remote Control Battery Troubleshooting Warranty Information Customer Support 3 3 4 6 8 8 9 12 12 13 17 18 18 19 21 25 25 27 27 28 29 33 34 1 x LV550HH Hybrid Ultrasonic Humidifier 1 x Cleaning Brush 3 x Aroma Pads (1 Pre-installed) 1 x Remote 1 x 3V CR2025 Battery (Pre-installed) 1 x User Manual SPECIFICATIONS Power Supply Rated Power Water Tank Capacity Customizable Humidity Range Max Moisture Capacity Max Warm Mist Temperature Effective Range AC 120V, 60Hz 110W 1.4 gallons (5.5 L) 30% 80% RH Cool Mist: 300 ml/h Warm Mist: 450 ml/h 104 F (40 C) 430 753 ft²( 40 70 m²) 3
SAFETY INFORMATION IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before using the device. Failure to comply with the instructions given in this manual and/or using the device in ways other than the ones mentioned in this manual may result in serious injury and/or damage to the product. 4 General Safety Only use this humidifier as described in this manual. Ensure that the plug fits properly into a polarized power socket. When not in use, turn the machine off and disconnect from a power source by removing the plug from the outlet. DO NOT attempt to open the base or attempt to remove the water level sensor for selfservicing. Doing so will void your warranty and may increase the risk of damage to the product, electric shock, or injury. DO NOT handle the power cord or plug with hands that are wet. Keep the plug and power cord away from liquids. DO NOT use this product in wet environments. DO NOT allow children to play with or near the device. Keep the machine out of reach from children. DO NOT immerse the humidifier base, humidity sensor, power cord, or plug while cleaning the unit Use & Care Always make sure to place the humidifier on a flat, elevated surface before operation. [Figure 2.1 on page 12] When moving the humidifier, remove the water tank from the base and pour out any excess water remaining in the inner chamber. Do not attempt to move the humidifier while the water tank is attached to the base. DO NOT use the handle on the water tank to move the humidifier while the tank is attached to the base. DO NOT place the humidifier near sources of heat, such as stove tops, ovens, radiators or computers. It is recommended to keep the humidifier at least 5 feet away from these heat sources. DO NOT place the humidifier near any large pieces of furniture or in any high-traffic area where it can be easily knocked over. DO NOT use your hand or any other object to cover the nozzle while the unit is on. Doing so may damage the product or cause injury. Fill the water tank with at least 2 cups of water before operating the humidifier.
DO NOT fill the water tank through the nozzle or mist tube. Doing so may damage the humidifier. DO NOT add essential oils or medicated vapor liquids directly into the water tank or through the mist tube. DO NOT add supplemental water treatment liquids or filters into the water tank. Always remember to turn the safety lock to the lock position when placing the water tank back onto the base. Position the humidifier so that there is at least a 10 inch clearance away from walls. DO NOT direct the nozzle toward walls. DO NOT allow mist or water to enter the humidity sensor. Moisture buildup inside the sensor will result in incorrect relative humidity readings. If the relative humidity in your room exceeds 68% while operating the humidifier, it is recommended to use the lowest mist setting or to turn off the device. Make sure your room is well-ventilated. This will better help humidify your room. Unplug the unit when not in use, or while cleaning it out. DO NOT clean the unit while it is connected to a power source or while it is on. DO NOT clean the device right after turning it off, especially after it has been diffusing warm mist. Allow the humidifier to completely cool down before cleaning. DO NOT use cleaning detergents to clean the humidifier. Only follow the instructions provided in this manual for cleaning and disinfecting (page 25). DO NOT disassemble the base to repair the humidifier in any way. Doing so may damage the device and will void your warranty. DO NOT use the humidifier if it is damaged or if it is not functioning properly due to manufacturer flaws. Discontinue use and contact Customer Support immediately (page 34). Do not discard the humidifier. SAVE THESE INSTRUCTIONS 5
GETTING TO KNOW YOUR HUMIDIFIER 4 3 1 2 1. Handle 2. Nozzle 3. Water Tank 4. LCD Display 5. Control Panel 6. Safety Lock 7. Base 8. Humidity Sensor 9. Aroma Pad 10. Aroma Box 11. Remote 5 6 7 11 8 9 10 6
12. Water Tank Cap 13. Mist Tube 14. Water Level Sensor 15. Heating Element 16. Inner Chamber 17. Cleaning Brush 18. Night Light 19. Cleaning Brush Storage 20. Air Vent 21. Transducer 22. Power Cord 12 13 14 18 15 19 20 16 21 17 22 7
LCD Display 1 10 9 2 3 4 5 6 7 8 1. Timer 2. Mist Icon 3. No Water Indicator 4. Warm Mist Icon 5. Night Light Icon 6. Auto Mode Indicator 7. Relative Humidity Level (RH) 8. Mist Level Indicator 9. Temperature Unit 10. Ambient Temperature Control Panel 1 2 3 4 5 6 ON/OFF DISPLAY WARM LIGHT HUMIDITY TIMER 7 8 9 1. Power Button 2. Display Button 3. Warm Mist Button 4. Night Light Button 5. Humidity Button 6. Timer Button 7. Mist Level Controls 8. Minus Button 9. Plus Button 8
GETTING STARTED 1. Turn the safety lock to the position. [Figure 1.1] 3. Lift up the handle, then pull up on the handle to remove the water tank from the base. [Figure 1.3] Figure 1.1 2. Remove the nozzle from the top of the water tank. [Figure 1.2] Figure 1.3 4. Flip the tank over and twist the water tank cap counterclockwise to remove it. [Figure 1.4] Figure 1.2 Figure 1.4 9
GETTING STARTED (cont.) 5. Fill the tank with cold or room temperature water. Use distilled water for best results. You can gauge how much water is in the tank by looking through the water tank. The maximum capacity is 1.4 gallons (5.5 L). [Figure 1.5] 6. Replace the cap once you have filled the tank to your desired level. Twist it clockwise to secure it tightly to the water tank. [Figure 1.6] Figure 1.5 Figure 1.6 NOTE: For best results, fill the water tank with distilled water. DO NOT add water through the nozzle or mist tube. [Figure 1.7] DO NOT add essential oils or medicated vapor liquids directly into the water tank or through the mist tube. [Figure 1.8] Figure 1.7 Figure 1.8 10
7. Carefully place the water tank back on the base, making sure to align the water tank cap with its respective opening. [Figure 1.9] 8. Turn the safety lock to the position. [Figure 1.10] 9. Replace the nozzle. [Figure 1.11] Figure 1.10 Figure 1.9 Figure 1.11 NOTE: Wipe off any excess water on the top and bottom of the base before replacing the water tank. 11
ON / OFF DISPLAYW ARML IGHT ON / OFFD ISPL AY WARM LIGHT HUMID ITYT IMER OPERATION General Operation 1. Place the humidifier on a flat, elevated surface. [Figure 2.1] 2. Properly fill the water tank as mentioned in the Getting Started section (page 9). 3. Plug the humidifier into a powered electrical outlet. The humidifier will chime, indicating that it is connected to a power source. 4. Press once to turn on the humidifier. The humidifier will start producing mist. [Figure 2.2] 5. (Optional) Press the mist level controls to change the mist level. [Figure 2.3] 6. Press once more to turn off the humidifier. Figure 2.2 Figure 2.1 12 Figure 2.3
Button Controls NOTE: For added convenience, the same button controls can be found on the included remote control. The LED display will automatically dim after 10 seconds of inactivity while the humidifier is operating. Power Button Press once to turn on or turn off the humidifier. Display Button Press once to turn on or turn off the display on the humidifier. Switching Temperature Units: To change the temperature units on the humidifier from F to C, press and hold for 2 seconds. Warm Mist Button Press once to turn on or turn off the warm mist function on the humidifier. NOTE: CAUTION: The warm mist being produced is 104 F (40 C). Do not place your bare hands, face, or other exposed skin over the nozzle while using the warm mist function. The warm mist function will remain off if the humidifier is not producing mist. Allow 10 minutes for the humidifier to warm up. The humidifier will start to produce warm mist 15 minutes after pressing. Night Light Button Press once to turn on or turn off the built-in night light. NOTE: The night light can be turned on or turned off while the humidifier is on standby (plugged in, but not producing mist). 13
Button Controls (cont.) Humidity Button The humidity button has 3 functions for this humidifier: i. Auto Mode: Press once to activate the automatic (Auto) mode for the humidifier. The Auto Mode will produce mist as needed to maintain the relative humidity (RH) at a comfortable level based on the ambient temperature [Chart A]. To turn off Auto Mode press once, and the AUTO symbol will disappear from the display. NOTE: Pressing any of the mist level controls while using Auto Mode will automatically turn off Auto Mode. Ambient Temperature ( F) Chart A Relative Humidity (%RH) 66.2 F 70% 68 69.8 F 65% 71.6 73.4 F 60% 75.2 77 F 55% 78.8 80.6 F 50% 82.4 84.2 F 40% 86 89.6 F 35% 91.4 96.8 F 30% 98.6 F 25% 14
ON / OFF DISPLAYW ARML IGHT HUMID ITYT IMER ii. Customizable Humidity 1. Hold for two seconds to access the humidity level selection. You will see Mist Level at the bottom right corner of the display along with a flashing number above it, indicating that you can now select a humidity level. [Figure 3.1] 2. Use + or - to select a humidity level anywhere from 30 80% RH. Please note that the adjustable levels increase and decrease in increments of five. [Figure 3.2] 3. The relative humidity section on the display will flash 5 times before the programmed humidity level is set. The display will then show the humidity icon along with the current humidity level, and the humidifier will start to produce mist until it reaches the programmed level. 4. The humidifier will stop producing mist once it reaches the programmed level. It will resume operation when the humidity drops below 3% of the programmed level in order to maintain the humidity in the room. 5. To cancel the Customizable Humidity Mode, press while the Mist Level message is on the display. NOTE: When selecting your desired humidity level, you can also press to confirm your selection. While the humidifier is operating on the Customizable Humidity mode, you can press + or - to program a different humidity level. Pressing the mist level controls will cancel the Customizable Humidity Mode. iii. Cancel Mist Functions: To cancel any mist function while the humidifier is operating, simply press. Figure 3.1 Figure 3.2 15
ON / OFF DISPLAYW ARML IGHT HUMID ITYT IMER ON / OFF DISPLAYW ARML IGHT HUMIDITY TIMER Button Controls (cont.) Timer Button The humidifier is equipped with a built-in 12-hour timer. The humidifier will automatically turn off when the programmed timer finishes counting down. 1. Press to activate the function. 2. Use the + or - buttons to select a time anywhere from 1 12 hours. [Figure 4.1] 3. Once you have selected your desired time, the timer section on the display will flash 5 times before the timer is set. [Figure 4.2] 4. To cancel the timer function, keep pressing the until the timer section on the display reads ----. [Figure 4.3] NOTE: The device will automatically turn off when the timer has finished counting down. X5 Figure 4.1 Figure 4.2 Figure 4.3 16
Mist Level Controls Press the mist level controls at the bottom of the control panel to select a mist level for the humidifier. There are 5 mist levels to choose from. Each level has its own button. You can also use the + or - buttons to select a mist level. Humidity Sensor The humidity sensor on the power cord is a vital component to this appliance. Please note the following tips to ensure that the sensor is properly functioning: DO NOT pull on the humidity sensor or the cord it is attached to. DO NOT point the nozzle toward the humidity sensor. DO NOT allow excessive moisture to build up inside the sensor. This will result in incorrect relative humidity readings. [Figure 5.1] If there is moisture inside the humidity sensor, turn off the humidifier and allow the sensor to completely dry before resuming use. DO NOT use hot air to dry the sensor. Doing so will cause it to malfunction. Figure 5.1 17
Automatic Shut Off The humidifier will automatically turn off when all of the water in the tank has been diffused, or when a programmed timer has finished counting down. When the water level is low the display will continue showing until more water is added to the water tank. [Figure 6.1] ON / OFF DISPLAYW ARML IGHT HUMID ITYT IMER Figure 6.1 Memory Function The humidifier will remember its programmed settings when turned off, and will resume these settings when it is turned back on. Please note that the humidifier must remain plugged in for this memory function to work. NOTE: The memory function does not work with the built-in timer. 18
USING THE AROMA BOX Your new humidifier can also be used as an aroma diffuser to provide added comfort in your home. 1. Turn off and unplug the humidifier from its power source. 2. Locate the aroma box at the back of the base. [Figure 7.1] 3. Gently push the aroma box into the base, and it will automatically spring out. Once the the aroma box is released, remove it from the base. [Figures 7.2 & 7.3] Figure 7.2 Figure 7.1 Figure 7.3 19
USING THE AROMA BOX (cont.) 4. Add 2-3 drops of essential oil on the aroma pad. [Figure 7.4] 5. Carefully replace the aroma box. Fill the water tank with water and gently place it back on the base as mentioned in the Getting Started section (page 9). [Figure 7.5] 6. Plug in and turn on the humidifier. Figure 7.4 Figure 7.5 20 NOTE: You can also add medicated vaporizing steam liquid to the aroma pad. The aroma pad can be cleaned and reused after diffusing essential oils (see page 27).
PREVENTING WATER LEAKS When not sealed properly, the water tank on your new humidifier may leak. The following tips will ensure that your humidifier will operate smoothly. 1. Make sure the silicone ring around the water tank cap is secured at all times. [Figure 8.1] 3. When moving the humidifier, remove the tank from the base and empty any excess water inside the inner chamber before moving the base. [Figures 8.3 & 8.4] Figure 8.1 2. Twist the cap clockwise to secure it tightly onto the water tank. [Figure 8.2] NOTE: There will be a small gap between the cap and the water tank. This is normal. Figure 8.3 Figure 8.2 Figure 8.4 21
PREVENTING WATER LEAKS (cont.) NOTE: DO NOT move the entire humidifier using the handle on the water tank. [Figure 8.5] (To properly remove the water tank, see the Getting Started section on page 9.) Figure 8.5 22
4. It is recommended to empty the inner chamber before replacing the water tank back onto the base. If there is too much water in the inner chamber, water may leak from the seam between the base and the water tank. [Figures 8.6 & 8.7] Figure 8.6 Figure 8.7 5. Wipe off any excess on water on the top and bottom of the base, then place the tank back on properly. [Figure 8.8 & 8.9] Figure 8.8 Figure 8.9 23
PREVENTING WATER LEAKS (cont.) 6. Make sure the safety lock is turned to the position when the water tank is on the base. [Figure 8.10] Figure 8.10 7. DO NOT shake the humidifier or place it on an inclined surface. Always make sure to place the humidifier on a flat, level surface and position the humidifier so that there is at least a 10 inch clearance away from walls. [Figure 8.11] 10 inches Figure 8.11 24
KEEPING THINGS CLEAN General Cleaning CAUTION: Make sure the humidifier is disconnected from any power source before cleaning. It is recommended to clean the humidifier on a weekly basis if used continuously, or at least once a month. 1. Unplug the humidifier. Allow the device and any remaining water to completely cool before cleaning. 2. Remove the nozzle from the top of the water tank, and rinse it under warm running water. Set it aside to dry. 3. Turn the safety lock to the position [Figure 9.1]. Carefully remove the water tank from the base, unscrew the water tank cap, and pour out any excess water (see Getting Started section on page 9). Figure 9.1 25
General Cleaning (cont.) 4. Pour 3 cups of distilled white vinegar along with 3 cups of water into the water tank. Replace the cap and gently shake the water tank to evenly coat all of its sides with the solution. 5. Fill the inner chamber with 1 cup of distilled white vinegar. [Blue area in Figure 9.2] 6. Allow the solutions to sit in both parts for at least 30 minutes. 7. Scrub all parts of the inner chamber with the included cleaning brush to remove any scale or build up. [Figure 9.2] 8. Pour out the excess vinegar and rinse the inner chamber thoroughly with warm water. Dry the chamber with a soft, clean cloth. 9. Rinse out the water tank with warm water and set it aside to air dry. 10. Allow all parts to dry completely. Reassemble the humidifier and store it in a covered space. Figure 9.2 26
Cleaning the Aroma Pad Disinfecting the Humidifier 1. Press the aroma box to release it from the base, then pull it out. (See Using the Aroma Box section on page 19.) 2. Remove the aroma pad from the aroma box. 3. Rinse the pad under warm running water. 4. Dry with a clean cloth and place it back into the aroma box. NOTE: DO NOT pour liquid cleaners or detergents into the aroma box. DO NOT use liquid cleaners or detergents to wash the aroma pad. It is recommended to change the aroma pad every 6 months. You can purchase new aroma pads by scanning the QR code below or search for Levoit LV550HH Replacement Aroma Pads on Amazon. It is recommended to disinfect the water tank before or after storing the humidifier for long periods of time. This method should also be used if there is any mold buildup inside the water tank. 1. Clean the water tank as instructed in the General Cleaning section (page 25). 2. Fill the water tank with 1 teaspoon of bleach along with 1 gallon of water. 3. Place ¼ teaspoon of bleach along with 1 cup of water into the base. 4. Allow the solutions in both parts to sit for 30 minutes. 5. Pour out the mixtures from both the water tank and base and rinse both parts thoroughly under clean, running water. 6. Allow the water tank and base to completely air dry before reassembling the humidifier. NOTE: Always wear gloves to protect your hands while using bleach. A 3% hydrogen peroxide solution may also be used to disinfect the humidifier. DO NOT use the humidifier immediately after disinfecting. Doing so may pose a potential health hazard. 27
Replacing the Remote Control Battery 1. Press the locking tab toward the pulling slot to remove the battery compartment. [Figure 10.1] 2. Properly dispose of the old battery. 3. Place a new 3V CR2025 battery into the battery compartment with the positive side facing up. [Figure 10.2] 4. Replace the battery compartment into the remote. Front Back Back of remote 3V CR2025 Battery Figure 10.1 Figure 10.2 28
TROUBLESHOOTING Problem Cause Solution No mist is coming out of the nozzle. Humidifier produces an unusual smell. Humidifier makes a loud or unusual noise. Mist is coming out from the base. Unit is not plugged in. Unit is not turned on. No water in the tank. Water level is low. Unit is new. Residual smell from diffusing essential oil on the aroma pad. Water is dirty, or water has been in the tank for a long time. Tank is positioned incorrectly. Water level is low. Unit is not level. Unit is malfunctioning. Water tank is not positioned correctly. Plug the humidifier into a powered electrical outlet. Tap the power button to turn on the unit. Add at least 2 cups of clean water into the water tank. Rinse the water tank and allow the humidifier to air dry. Remove the aroma pad, rinse it under clean water, and allow it to dry. Clean the humidifier as instructed in the General Cleaning section on page 25. Turn off and unplug the unit, then align the water tank cap with its respective opening in the inner chamber. Turn the safety lock to the position. Add at least 2 cups of clean water into the water tank. Place the unit on a flat, level surface. Turn off and unplug the unit and discontinue use. Contact Customer Support (page 34). Turn off and unplug the unit, then align the water tank cap with its respective opening in the inner chamber. Turn the safety lock to the position. 29
TROUBLESHOOTING (cont.) Problem Cause Solution White dust appears around the humidifier after operation. Puddle of water forms below the base. Water being used has a high mineral content. Humidifier was not properly cleaned after last use. Mist setting is too high. Room is not well-ventilated. Water tank is not positioned correctly. Excess water that has spilled while filling the water tank or replacing the water tank back onto the base. Humidifier base is leaking. Use distilled water with the humidifier. If distilled water is not available, use purified or filtered water. Remember to clean your water tank at least once a month. Clean the humidifier as instructed in the General Cleaning section on page 25. Remember to clean the water tank at least once a month. Switch the humidifier to a lower mist setting. Open a window to ensure proper airflow for your humidifier, or move the humidifier to a more well-ventilated room. Turn off and unplug the unit, then align the water tank cap with its respective opening in the inner chamber. Turn the safety lock to the position. Wipe off excess water from the top and bottom of the base before replacing the water tank. Unplug the humidifier immediately and discontinue use. See the Preventing Water Leaks section on page 21 before resuming use. If your unit continues to leak, contact Customer Support (page 34). 30
Problem Cause Solution The mist being produced is not warm after pressing. Incorrect humidity level is being displayed. Control panel does not work. The humidifier is heating up to produce warm mist. It will take about 15 minutes after pressing for the humidifier to heat up. Please wait for 15 minutes. Use caution when using the warm mist function. The mist being produced is 104 F (40 C). Unit has malfunctioned. Contact Customer Support (page 34). Room is larger than the effective range of the humidifier. Relative humidity in the room is too high. Moisture has built up inside of the humidity sensor. The nozzle is facing the direction of the humidity sensor. Humidity sensor is broken or defective. Hands are too wet when using the control panel. Hands are too dry when using the control panel. Move the humidifier to a room that is within the effective range of 430 753 ft² (40 70 m²). If the relative humidity in the room is over 68% RH, it is recommended to set the humidifier to the lowest mist setting or turn off the humidifier. Turn off the humidifier and allow the humidity sensor to completely air dry before resuming use. Turn the nozzle so that it is facing away from the humidity sensor. Contact Customer Support (page 34). Keep hands dry while operating the control panel. Moisturize hands before using the control panel. Unit has malfunctioned. Contact Customer Support (page 34). 31
TROUBLESHOOTING (cont.) Problem Cause Solution Remote control does not work. Remote control is out of range from the humidifier. Batteries need to be changed. Use the remote control within 16 feet (5 m) of the humidifier. Replace the batteries as mentioned in the Replacing the Remote Control Battery section on page 28. Remote is defective. Contact Customer Support (page 34). 32
WARRANTY INFORMATION Product Name Model Number Default Warranty Period TERMS & POLICY Hybrid Ultrasonic Humidifier LV550HH 1 Year(s) For your own reference, we strongly recommend that you record your order number and date of purchase. Date of Purchase Order Number Levoit warrants all products to be of the highest quality in material, craftsmanship, and service. effective starting from the date of purchase. Levoit will replace any product found to be defective due to manufacturer flaws based on eligibility. Refunds are available within the first 30 days of purchase. Refunds are only available to the original purchaser of the product. This warranty extends only to personal use and does not extend to any product that has been used for commercial, rental, or any other use in which the product is not intended for. There are no warranties other than the warranties expressly set forth with each product. This warranty is non-transferrable. Levoit is not responsible in any way for any damages, losses or inconveniences caused by equipment failure or by user negligence, abuse, or use noncompliant with the user manual or any additional safety, use, or warnings included in the product packaging and manual. This warranty does not apply to the following: Damage due to abuse, accident, alteration, misuse, tampering or vandalism. Improper or inadequate maintenance. Damage in return transit. Unsupervised use by children under 18 years of age. Levoit and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed in the user manual. Some states do not allow this exclusion or limitation of incidental or consequential losses so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Additional 1-Year Warranty You can extend your one-year warranty by an additional year. Log onto www.levoit.com/warranty and enter your order number (i.e. Amazon or Houzz) within the first 14 days of your purchase to register your new product for the extended warranty. If you are unable to provide the order number for your product, please type a short note in the order number field along with the date you received your product. 33
WARRANTY INFORMATION (cont.) Defective Products & Returns Should your product prove defective within the specified warranty period, please contact Customer Support via support@levoit.com with your order number. Once our Customer Support team has approved your request, please return the unit with a copy of the invoice and your order number. CUSTOMER SUPPORT Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is our goal! Customer Support Levoit Corporation 1202 N. Miller St., Ste. A Anaheim, CA 92806 Support Hours Monday - Friday: 9:00 am - 5:00 pm PST Email: support@levoit.com Toll-Free: (888) 726-8520 *Please have your order invoice and order number ready before contacting Customer Support. 34
Connect with us @LevoitLifestyle 35
Levoit.com AL0418BFV1.5