s
s Function Level control valves control liquid levels without the necessity of an external energy input. There are two types of level controllers including:. Chambered valves such as; bleeding & venting valves and steam traps. Float Valves using a free fl oat Operation Feed valves close as the fl oat rises, preventing overfi lling. Drain valves close as the fl oat drops, ensuring that a minimum liquid level is maintained. Applications Level control valves are recommended for systems which are not controlled by a centralised control system, and for subsidiary control circuits. Their simple design makes planning, installation, handling and maintenance easy in normal industrial applications. Type of Level Control Valves:. Bleeding and venting. Float. Steam traps. Level control valves Valves used in:. Ships. Hospitals. Water treatment plants. Pharmaceutical industry. Printing works. Chemical industry. Beverage industries. Power generation plants. Car factories. Laundries. Petro-chemical industry. Micro chip production. Air conditioning plants. Fire fighting systems. Mining industries. Heating plants. Biogas generating plants. Pipeline systems. Swimming pools. Food technology. Edible oils production. Offshore drilling platforms
Float Float Controlled s KA/KE 2 1.12/1.32 Universal Valve for Small Flow Rates KA 2 Universal Valve for small fl ow rates, up to 190 C, Manual vent valve, soft seal, manufactured in stainless steel. Connection G 3/4 x 1/2A Nominal Pressure PN 16 Outlet Pressure Flow-rate 0-12 bar 350 l/h Maximum temperature 190 C Medium Steam All CrNiMo-steel construction Body Seal FEPM Valve Seal FFKM KA/KE 2X Universal Valve for Larger Flow Rates KA 2 Universal Valve for small fl ow rates, up to 190 C, Manual vent valve, soft seal, manufactured in stainless steel. Connection size: Available Screwed or Flanged. Connection DN 25 x 3/4A Connection G 1 x 3/4A Nominal Pressure PN 16 Operating Pressure 0-13 Flow-rate 1200 l/h Maximum temperature 190 C Medium Steam All CrNiMo-steel construction Body seal FEPM Valve seal Metallic
Float Float Controlled s KA/KE 3 Universal Valve with Thermal Bleeding For steam, compressed air, aerosols. Connection DN 15-25 Connection G 1/2-1 Nominal Pressure PN 16 Operating Pressure Flow-rate 0-12 bar 2000 l/h Maximum temperature 190 C Medium Steam All CrNiMo-steel construction Body Seal FEPM KA Axomat Universal Valve of Cast Steel Connection DN 15-32 Nominal Pressure PN 16-40 Operating Pressure 0-13 Flow-rate 2700 l/h Maximum temperature 200 C Medium Body Seat Cone Float Steam DN 25 grey cast iron DN 32 spheroidal cast iron or Cast steel Cr-steel CrNi-steel CrNiMo-steel Body seal Nova Universal
Float Float Controlled s KA Niagara High-performance and Sturdy KA Niagara 1, 80 and 81 series are high performance, sturdy steam traps. Temperature up to 200 C, with manual vent valve, continuous vent valves and/or Thermal start-up available. Sizes over DN65 offered with drain plug, seat, cone and fl oat manufactured from Stainless Steel. Connection DN 15-150 Nominal Pressure PN 16-40 Operating Pressure Flow-rate 0-40 bar 193 m3/h Maximum temperature 200 C Medium Body Forklever Seat Cone Float Steam Spheroidal cast iron or cast steel CrNiMo-steel or Rg Cr-steel CrNiMo-steel CrNiMo-steel Body Seal Nova Universal
BK BK45S Screwed s, suitable for draining of saturated steam and superheated steam lines and steam tracers. Can also be used for air venting. G1/2 - G1 BSP/NPT Female 22 bar +250 C Body material C 22.8 (1.0460) Screw material 24 CrMo 5 (1.7258) Bimetallic regulator material, other internals Stainless steel For pressures between 0.2-22 Barg = 70-500 Kg/Hr Cold Condensate For pressures between 0.1-22 Barg = 200-3000 Kg/Hr BK45F Flanged s G1/2, G3/4, G1, DN15, DN20, DN25 FLANGES 22 bar +250 C Body material C 22.8 (1.0460) Screw material 24 CrMo 5 (1.7258) Bimetallic regulator Stainless steel material, other internals For pressures between 0.2-22 Barg = 70-500 Kg/Hr For pressures between 0.1-22 Barg Cold Condensate = 200-3000 Kg/Hr
DK DK47L Low Condensate Screwed s, specially designed for low condensate fl ow rates. A range of compact, robust, practically maintenance free stainless steel thermodynamic traps fi tted with integral strainer. G1/2 - G1 BSP / NPT Female 63 bar Body material A743CA40F (1.4027) Cap material AISI 416 (1.4005) Valve disc material AISI 420 (1.4021) Strainer material A 182F304 (1.4301) Plug material AISI 416 ( 1.4005) For pressures between 0.7 42 Barg = 60-300 Kg/Hr Admissible back pressure up to 80% of Back pressure upstream pressure. DK47H High Condensate Screwed s, specially for larger condensate fl ow rates G1/2 - G1 BSP / NPT Female 63 bar Body material A743CA40F (1.4027) Cap material AISI 416 (1.4005) Valve disc material AISI 420 (1.4021) Strainer material A 182F304 (1.4301) Plug material AISI 416 ( 1.4005) For pressures between 0.7-42 Barg = 150-2000 Kg/hr
DK DK57L Low Condensate Screwed s, specially designed for low condensate fl ow rates. A range of compact, robust, practically maintenance free stainless steel thermodynamic traps fi tted with integral strainer. G3/8 - G3/4 BSP / NPT Female 42 bar Body material AISI 420 F (1.4021) Cap material AISI 416 (1.4005) Valve disc material AISI 420 (1.4021) All stainless steel construction From pressures between 0.25-42 Barg = 80-550 Kg/ Hr DK57H High Condensate Screwed s, specially for larger condensate fl ow rates G1/2 - G1 BSP / NPT Female 63 bar Body material AISI 420 F (1.4021) Cap material AISI 416 (1.4005) Valve disc material AISI 420 (1.4021) For pressures between 0.25-42 Barg = 300-2000 Kg/ hr
MK MK35/31 Screwed s, for heaters, radiators, presses, steam mains, drainage and air venting NOT FOR USE WHERE WATER HAMMER / SUPERHEATED STEAM EXISTS G3/8 - G1/2 BSP / NPT Female 23.3 bar Body material A105 (1.0460) Cover material A105 (1.0460) Cover screw material A193B7 (1.7225) Membrane material Other internal material Hastelloy Stainless Steel Cover gasket material Graphite/ CrNi For pressures between 0.26-21 Barg = 20-800 Kg/hr For pressures between 0.1-21 Barg Cold Condensate = 76-2500 Kg/hr MK35/32 Socket Weld s DN10, DN15 23.3 bar Body material A105 (1.0460) Cover material A105 (1.0460) Cover screw material A193B7 (1.7225) Membrane material Other internal material Hastelloy Stainless Steel Cover gasket material Cold Condensate Graphite/ CrNi For pressures between 0.26-21 Barg = 20-800 Kg/hr For pressures between 0.1-21 Barg = 76-2900 Kg/hr
MK MK45 Low Condensate Flanged s, suitable for heaters, radiators, calorifi ers, presses, steam mains, drainage and air venting from steam spaces and boilers. The MK steam traps can replace fl oat traps and inverted bucket traps in many applications. NOT FOR USE WHERE WATER HAMMER / SUPERHEATED STEAM EXISTS G1/2 -G1 /DN15 - DN25 BSP / NPT Female 32 bar Body, Cover material C 22.8 (1.0460) Screw material 24 CrMo 5 (1.7258) Thermostatic Capsule material Other internal material Hastelloy, Stainless steel Stainless Steel For pressures between 0.5-22 Barg = 20-380 Kg/hr For pressures between 0.1-22 Barg Cold Condensate = 76-1000 Kg/hr MK45 High Condensate Flanged s G1/2 -G1 /DN15 - DN25 BSP / NPT Female 32 bar Body, Cover material C 22.8 (1.0460) Screw material 24 CrMo 5 (1.7258) Thermostatic Capsule material Hastelloy, Stainless steel Other internal material Cold Condensate Stainless Steel For pressures between 0.25-22 Barg = 100-800 Kg/hr For pressures between 0.1-22 Barg = 250-2800 Kg/hr
MK MK45 Low Condensate Screwed or Weld s, suitable for heaters, radiators, calorifi ers, presses, steam mains, drainage and air venting from steam spaces and boilers. The MK steam traps can replace fl oat traps and inverted bucket traps in many applications. NOT FOR USE WHERE WATER HAMMER / SUPERHEATED STEAM EXISTS G1/2 - G1 BSP Female 32 bar Body, Cover material C 22.8 (1.0460) Screw material 24 CrMo 5 (1.7258) Thermostatic Capsule material Hastelloy, Stainless steel Other internal material Stainless Steel For pressures between 0.5-22 Barg = 20-380 Kg/hr For pressures between 0.1-22 Barg Cold Condensate = 76-1000 Kg/hr MK45 High Condensate Screwed or Weld s G1/2 - G1 BSP Female 32 bar Body, Cover material C 22.8 (1.0460) Screw material 24 CrMo 5 (1.7258) Thermostatic Capsule material Hastelloy, Stainless steel Other internal material Cold Condensate Stainless Steel For pressures between 0.25-22 bar = 100-800 Kg/hr For pressures between 0.1-22 bar = 250-2800 Kg/hr
UN UNA14 Screwed Ball Float Traps The UNA14 is a ball fl oat steam trap with rolling ball valve. The steam trap can be used for all operating conditions, as they are unaffected by back pressure. They consist of a body with bolted cover and a control unit. G1/2 - G1 BSP 25 bar +350 C Body material C 22.8 (1.0460) Cover material GGG 40.3 (0.7043) Fixing studs material 42CrMo4 (1.7225) Ball fl oat material X6 CrNiMoTi 17 12 2 (1.4571) Cover gasket Thermostatic Capsule Graphite-CrNi Hastelloy / Stainless steel Other Internals Stainless steels Flow capacity For pressures between 0.1-21 Barg = 80-600 Kg/hr UNA14 Flanged Ball Float Traps DN15 - DN25 Flanged 25 bar +350 C Body material C 22.8 (1.0460) Cover material GGG 40.3 (0.7043) Fixing studs material 42CrMo4 (1.7225) Ball fl oat material X6 CrNiMoTi 17 12 2 (1.4571) Cover gasket Thermostatic Capsule Graphite-CrNi Hastelloy / Stainless steel Other Internals Stainless steels For pressures between 0.1-21 Barg Flow Capacity = 80-600 Kg/hr
Contact Us For More Information: Telephone: +44 (0)117 930 6133 Fax: +44 (0)117 929 8193 Email: enquiries@blupax.com Web: www.blupax.com