SAVERLUX
Index I. Introduction 1. Choice for Tomorrow! 2. Introduction: SAVERLUX II. SAVERLUX: The Feature 1. Intelligent Brightness Configuration 2. Easy Installstion Operation 3. Excellent Application to Normal LED Lights 4. Realistic Energy Saving in Specific Spaces Ⅲ. Dimming SAVER (Economic Model) 1. Amazing Changes to Normal LED Lights with Dimming SAVER IV. SAVERLUX: The Composition 1. Superb technology Concentrated Energy Saving Light System V. SAVERLUX : The Effect 1. Energy Saving VI. SAVERLUX: The Superiority 1. Product Superiority 2. Competitive Product Comparison 3. SUPERLUX Wireless Communication Stability Review 4. Compensation Measure for Malfunctioning VII. SAVERLUX: The Business Model 1. ESCO Type Business 2. Business Process VIII. The New Future 1. The Decision for the Future! IX. Attachment 1. The Demonstration Site 2. Certificates (Patent Certificate Venture Business Confirmation)
INTRODUCTION Why Didn t You Know? What Makes You Hesitate? The Key Solution is SAVERLUX. Right at this moment, Our Valuable Money, Our Limited Energy, Our Natural Environment are Mindlessly Destroyed Wasted. We will keep your valuable assets quality lives. SAVERLUX s unique Intelligent Power Saving System is here to keep your Efficient Clean Life Environment. Make a Decision for tomorrow!
INTRODUCTION SAVERLUX [ Intelligent LED Wireless Sensor Light System Optimized for Underground Parking Space ] SAVERLUX is suitable to underground parking spaces, building passages, emergency stairs etc. with WIRELESS connections. Also, SAVERLUX is a patented products with the Wireless Signal Exchange Technology, an applied Technology of the basic wireless communication technology, for Synchro or Consecutive Actions of selected number of SAVERLUX lights. The Feature: 1. Exceptional Practicality compared to Existing LED Lights LED Sensor Lights 2. Easy Installation Installation Cost Reduction 3. Maximized Energy Saving 4. Superb Product Design Elegant Lighting Environment < Creation of Property Value Increase >
SAVERLUX: The Feature Intelligent Brightness Configuration (0~90%) Normal Sensor Light (Constant Low Light for Energy Saving) 100% In Required Place with Right Brightness If movement of a vehicle or a person is sensed by SAVERLUX s Motion Sensor, the light is activated only with right brightness in the required place. In Waiting State without any detected motion, the Minimum Brightness is maintained to save the electricity. Ex) If a person or a vehicle is in move. The rear the frontal area of the movement brightened with the maximum The lights of rear area of the movement are gradually dimmed to the preset power saving brightness after a certain period of time. Maintained St-by Brightness = Prevention of Unnecessary Energy Loss. St-by Brightness Configuration 8 Levels (0% < 10% < 20% < 30% < 40% < 80%< 90% < 100%) Brightness Configuration 10% 40% 100% The St-by Brightness can be set maintained to the level causing no difficulty for CCTV other system operation.
SAVERLUX: The Feature Easy Installstion Operation Wireless Smart World = Smart Wireless Age! Each SAVERLUX is connected with the Wireless Control System exchanging signals for lighting maintaining of St-by Light Level so that no cabling is required between the lights during the installation process. - Installation Cost Reduction compared to other wired lighting system. In a complicated cabling environment for light installation, SAVERUX can be installed without restrictions due to the wireless connection in any place. <Blind Area with Complicated Installation Conditions ) The number of lights initially activated immediate after a moving person or vehicle is detected by the motion sensors of the lighting system can be configured. <6 Lights Set > <3 Lights Set > <1 Light Set > - The number of initially activated lights (1 ea., 3 ea., 6 ea. 9 ea. ) Each light has own built-in device for power saving, no additional professional management to control the power saving function is required.
SAVERLUX: The Feature Excellent Application to Normal LED Lights Using Cable Connected Lights like Wireless Lights Connecting normal LED lights between SAVERLUXS with cable, the similar power saving functions can be performed. Wireless Connection < The normal LED lights wired with a SAVERLUX with built-in motion sensor can perform consecutive lighting, st-by light level maintenance etc., similarly to the SAVERLUX > A site already cables for lights are installed, utilizing the existing wired lights related facilities in maximum, the cost for light replacement can be saved in the maximum rate. A minimum number of SALUX installed in a passage like a corridor can perform the consecutive lighting power saving functions with other wired lighting system preinstalled in the site. Cable Connection
SAVERLUX: The Feature Realistic Energy Saving in Specific Spaces 40W 20W SAVERLUX 20W, the Must-Have for Emergency Stairs Currently, normal lights are always on for an emergency in the most emergency stairs. [Issue] The normal lights installed in emergency stairs with relatively less pedestrians are turned on for 25 hours of day 356 days of year consuming a great amount of unnecessary energy. Since SAVERLUX 20W is wirelessly connected, a consecutive performance between the lights installed on different floors is possible. ex) If a person moving from the second floor to the third, the switch signal is wirelessly transmitted from the 2 nd floor light by which the movement is sensed initially to the first floor light the third floor s so that the mover can feel the same sensation as if the lights have been stayed to be on. < If no motion is sensed anymore, the lights are changed to be in the st-by light level. > In an emergency like fire, no matter to any object s movement, the entire lights in the emergency stairs are uniformly turned on stayed with the maximum light level until the end of the situation.
Dimming SAVER ( moving sensor wireless communication component) Amazing Changes to Normal LED Lights with Dimming SAVER Dimming SAVER Applied to LED Lights Product Name : Dimming SAVER Dimming Saver is the independent product of the moving sensor wireless communication component of SAVERLUX to be attached to a normal LED light for he same energy saving feature as SAVERLUX. The product can provide brightness configuration dimming function for each circumstances preventing unnecessary power loss resolve heat generation problems of existing normal LED lights. Why? By lighting only when necessary keeping the minimum lighting level during st-by, mimizes the heat generation. Dimming SAVER s Outsting Feature : 1. Can change a normal LED light without power saving feature to a power efficient light with situational light level configuration technology. 2. Can reduce the cost of light replacement the related installation in a great deal by applying Dimming SAVER to the existing lighting system instead of the entire existing LED light change to power saving light system.
SAVERLUX: The Composition Superb technology Concentrated Energy Saving Light System [ Power ] : Light power supply Control device power supply Power control [ LED plate : Lightening Part] LED Chip of Iljin semi-conductor [ Control Sensor ] : Motion sensor of products [ Control board ] : Wireless in/out between lights Setting of light Control quantities of lights linked each other
SAVERLUX: The Effect SAVERLUX - Energy Saving Clean Environment Improvement to Clean Environment by Installing Elegant Lighting System Building s Value Upgrade Life Quality Electric Fee Saving (Max. 90%) Due to Dimming Feature, Min. Power Consumption in St-by Building s Value Upgraded by Advanced Flexible Application With the Interaction with Wireless Communication, No Restriction of Light Installation Environment. Perfect Power Savings in Emergency Stair Corridor Areas. Energy Saving Intelligent Power Saving System Cumulative Electric Fee System Affordable Investment As ESCO Type Project, the Installation Cost is supported by banks. Minimized Installation Cost Safe Space Creation Security Function With Motion Sensor. Interactive Control Enabled Even in Rom Light Malfunctions. The Highest Brightness around Objects.
SAVERLUX: The Superiority Product Superiority The maximum power saving product due to the minimum brightness level configuration Dimming feature. Compensating the disadvantage of the cable communication, the wireless communication has no restriction for installations. Installation cost reduction by the wireless communication. The maximized power saving enabled with the minimum investment because of low-budget product development various interconnection technologies. The higher total intensity efficiency of light compared to other companies; products, brighter spaces are created. The st-by light level can be configured as off to save power more than 90% at maximum. Material cost reduction product quality secured by the differentiated wireless technology application. The superb product classified as B Level after the technology evaluation by Korea Technology Finance Corporation.
SAVERLUX: The Superiority Competitive Product Comparison * Republic of Korea Division FL1200-28WG ( Kumho ) Company L s LED (40W) Company J s Sensor (40W) SAVERLUX (40W) Comparison Result Size 1200 x 73 x 38 1240 x 183 x 46 1225 x 206 x 87 1200 x 150 x 50 Semiconductor Light / Discharge Tube Total Luminous Flux Light Efficiency (lm/w) Power Consumption (W) Actual Power Consumption (W] 2300 2670 2660 2880 82lm/W 65lm/W 75lm/W 80lm/W + System Efficiency 28W 40 W 38 W 36 W 28W 8W 8W 7W 45% Electric Saving Power Saving Mode X Available / 4 W Operation for Power Saving Available / 4 W Operation for Power Saving Available / 0W or 4 W Operation for Power Saving Color Temperature Color Rendition 6500 6000~7100 7000 6,000~7,000 70 + 75 + 75 + 75 + Life Span 3,000 ~ 50,000hrs 50,000hr 50,000hr + 50,000hr + Pro/Con Using for 24 Hrs, Product Span Reduced by Heat Problems. Low Cost Due to Wired Communication, Great Limitations for Installation. High Installation Cost Due to Wired Communication, Great Limitations for Installation. High Installation Cost Wireless Connections Allowing Flexible Installation Place Selection Low Installation Cost. Curved Elegant Reflector Design. Wide Light Diffusion Minimizing the Blind Space
SAVERLUX: The Superiority Wireless Communication Stability Review The Frequency Range for Safety Systems of the Specific Low Output Wireless Devices is used. ex) Anti-theft Alarm, Fire Alarm etc. Since the Frequency B Range is 5Khz narrow b, No Communication Issues due to High Selection Rate. Receiving Two Signals in Uni-directional Communication, the Data with Higher Signal Level is Processed as the Valid Data. All Devices are in Reception Mode during the St-by: Only the light senses a movement is changed to be Transmission Mode to minimize data interference to other lights. 3 continuous Tx/Rx on each movement sensing to prevent wireless communication error. Device Name (Application) Wireless Device for Wireless Control Industrial (Wireless Heavy G en er al Pu rp os e Equipment, Crain Etc. ) Auto. Door Control, Vehicle Starting Device etc. Frequenc y (MHz) 173.6250 ~ 173.7875 447.8625 ~ 447.9875 173.0250 ~ 173.2750 447.6000 ~ 447.8500 Radio Type F(G)1D F(G)2D F(G)1D F(G)2D F(G)1D F(G)2D F(G)1D F(G)2D Antenn a Power 10mW 10mW 5mW 5mW Freque ncy Range 8.5KHz 8.5KHz 8.5KHz 8.5KHz Transmission Speed is 100m/s in Max.. (54Km/h in 3m distance between lights, 72Km/h in 4m distance between lights) Vehicle Starting Device 311.0125 ~ 311.1250 A1D A2D F(G)1D F(G)2D 5mW 8.5KHz The Review of the Useable Frequency Range (447Mhz) the Problems in the Protocol Completed. * Testing Institutions Java Information Technology, Link Electronics, Biju Net Wireless Device for Safety System (Anti-theft, Fire Alarm System) 447.2625 ~ 447.5625 F(G)1D F(G)2D 10mW 8.5KHz
SAVERLUX: The Superiority Compensation Measure for Malfunctioning When Data is transmitted by a SAVERLUX light, the each receiving light analyses the received DATA turn lights on in the configured area, Therefore, a malfunction of a specific light won t affect other normal lights functioning. In case of abnormal sensor signal by a motion sensor s malfunctioning, since SAVERLUX transmits once for 10 seconds, there is no problem (noise) in the wireless communication with other lights. Regarding LED Light Converter (Power) Lifespan Abnormality Issues : 1. SAVERLUX adapts a long-life condenser with 105 capacity for the temperature issue directly influencing the product lifespan. 2. Product Lifespan Test Commission (Korea Institute for Machinery Materials): Product Lifespan in 50,000 hrs Confirmed.
SAVERLUX: The Business Model SAVERLUX's ESCO Type Business If a user wanting to improve the existing energy using facility to save energy cannot conduct the plan because of technological or financial burdens, the business arrangement, ESCO Type Business, is available for the user with the technology products supplied by LED SAVER the financial support from a financial institution in alliance with LED SAVER with the financial plan to recollect the invested money from the saved portion by the cost reduction resulted from the invested facility. ESCO Type Investment Business is a venture operation through which an energy user can substitute the existing facility with the energy saving facility without the burden of investment while related companies take the risk for the investment profits. Apartment Resident 2 Loan Agreement Submission Project Payment Debt Right Transfer Agreement Establishment 6 Project Money Payed 1 Installation Project Contract Established 7 Maintenance Fee Payment Other ESCO Registered Financing Companies 3 Project Financial Debt Transfer Permission Application 4 Debt Transfer Permission 5 Confirmation of Completion, Loan Payment Request 8 Loan Principle & Interest Repayment Resident Representative Council
SAVERLUX: The Business Model Business Process Maintenance Cost Energy Cost Energy Cost Reduction 투자비상환비용 사용자이익 Repayment Amount (Energy Saving) Customer Profit Increase 사용자이익 Customer Profit (Energy Saving) Maintenance Cost Energy Cost Energy Cost ESCO Type Investment Business Flow 1. Investment Consultation The energy saving facility investment consultation between LED SAVER the energy user desiring of investment on the energy saving. After the preliminary research, the simple proposal is presented. 2. Energy Management Diagnose Business Structuring Decision (Contract Establishment) Conduct Electric Consumption Status Research on the energy consuming facility. Energy Reduction Amount Forecast Investment Amount Estimation regarding the energy savings via Energy Efficiency Analysis. The Business Proposal presented for the contract with the energy user after the investment consultation. 3. Energy Saving Facility Installation Follow-up Management The Installation is performed According to the work scope, the follow-up management (Energy-Service) provided after the completion. The repayment is made according to the contract conditions from the energy saving cost resulted by the energy consuming facility. 4. The Termination of the Contract After the completion of recollection of the invested amount in accordance with the contract, the investment contract for the energy savings is terminated. From the time of the completion, the portion of the energy saving becomes the user s profit.
The New Furue Do You Make the Choice? Why Do You Make the Choice? That is because it is SAVERLUX. In the very needed place With the right brightness With exactly required amount of electricity cost We guarantee the improvement of our customers valuable assets life quality. We will show the future with us more brightly while protecting the environment clean saving the cost. With SAVERLUX s Intelligent Power Saving System () We are always READY for our Customers. So now make the decision for your better future!
[ Attachment Demonstration Site ] The Site Name : the 2nd Boram the Heim A.P.T. Yeomchang-dong, Kangseo-go, Seoul, Korea
SAVERLUX -- Thank You-- LED SAVER Co. Ltd., #C-303, Seoul Hightech Venture Center, 647-26, Deungchon-dong, Gangseo-gu, Seoul, Korea 157-030 *Tel. +82-2-2668-4233 / Fax. +82-2-2668-4235 *Homepage : http://www.ledsaver.co.kr *Email : ledsaver@ledsaver.co.kr *Contact to Mr. Jun Heo (Sale & Marketing Manager)