Nederlandse norm. Vervangt NEN-ISO/IEEE :2010. ICS ; maart 2011

Similar documents
Nederlandse norm. NEN-EN /NB (en)

Voorbeeld. Preview. NEN-EN-ISO 9626/A1 (en) Wijzigingsblad

Nederlandse norm. NEN-ISO (en) Woningen - Beschrijving van eigenschappen - Deel 4: Brandbeveiliging (ISO :2017,IDT)

Nederlandse norm. NEN-EN /IS2 (en) Alarmsystemen - Inbraak- en overvalsystemen - Deel 1: Systeemeisen

Voorbeeld. Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 175 psi (Sizes NPS ½ Through NPS 2) Preview ASME B16.

English Version. This Technical Specification (CEN/TS) was approved by CEN on 15 July 2013 for provisional application.

NEN 3840+A1 (en) Operation of electrical installations High voltage. Dutch standard. Replaces NEN 3840:2011 ICS ;

Nederlandse norm. NEN-EN (en)

Nederlandse norm. NEN-EN-ISO (en)

English version. Inspection and testing of electrical installations in domestic properties

Nederlandse norm. NEN-EN /A2 (en) Metalen industriële leidingsystemen - Deel 5: Keuring en beproeving

Nederlandse norm. NEN-EN-ISO 2919 (en) Stralingsbescherming - Gesloten radioactieve bronnen - Algemene eisen en classificatie (ISO 2919:2012,IDT)

Voorbeeld. norm Akoestiek - Meting van geluidsabsorbtie in een nagalmkamer (ISO 354:2003,IDT) Preview. NEN-EN-ISO 354 (en)

Vervangt NEN-ISO 6926:1999,voorblad

Voorbeeld. Preview ISO INTERNATIONAL STANDARD. Safety of machinery Two-hand control devices Functional aspects and design principles

Ergonomic principles related to mental workload - Part 2: Design principles (ISO :1996,IDT) april 2000 ICS

Nederlandse norm. NEN-EN-ISO (en)

INTERNATIONAL STANDARD

Dit document bevat de officiële Engelse versie van de Europese norm EN 1384, september 1996.

(en) Hoogspanningsschakelmaterieel - Deel 102: Hoogspanningswisselstroomvermogenschakelaars en aardschakelaars (IEC :2001,IDT)

Nederlandse praktijkrichtlijn. NPR-CLC/TS (en) Alarm systems - Intrusion and hold-up systems - Part 2-11: Intrusion detectors - ALDDR

Nederlandse norm. NEN-EN-IEC (en) Wireless power transfer - Management - Part 3: Multiple source control management (IEC :2016,IDT)

Nederlandse norm. NEN-EN-ISO 1716 (en) Bepaling van het brandgedrag van bouwproducten - Bepaling van de verbrandingswarmte (ISO 1716:2018,IDT)

Voorbeeld. Preview ISO 3523 INTERNATIONAL STANDARD. Oil of cananga [Cananga odorata (Lam.) Hook. f. et Thomson, forma macrophylla]

Nederlandse norm. NEN-ISO 6183 (en)

Voorbeeld. Preview. NEN-IEC (en)

Nederlandse norm. NEN-ISO/IEC (en)

Voorbeeld. Preview ISO INTERNATIONAL STANDARD

Voorbeeld. Preview ISO INTERNATIONAL STANDARD

Nederlandse norm. NEN-EN 1303 (en) Hang- en sluitwerk - Cilinders voor sloten - Eisen en beproevingsmethoden

Nederlandse norm NEN-EN-ISO (en) Medical devices - Application of risk management to medical devices (ISO 14971:2007,IDT)

Roomheaters fired by solid fuel - Requirements and test methods september 2004 ICS Vervangt NEN-EN 13240:2001/Ontw.

Voorbeeld. norm NEN-EN Preview. Mechanische trillingen - Opgaven en controle van trillingskengetallen. Nederlandse

Voorbeeld. norm Water quality - Determination of soluble silicate by flow analysis (FIA and CFA) and photometric detection (ISO 16264:2002,IDT)

Voorbeeld. Preview. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Part 2:

Nederlandse norm. NEN-EN-ISO /A1 (en)

Nederlandse norm. NEN-EN (en)

Nederlandse praktijkrichtlijn. NPR-IEC/TR (en)

INTERNATIONAL STANDARD. Lighting of indoor work places. Éclairage intérieur pour des lieux de travail

Nederlandse norm. NEN-ISO (en) Gas turbine applications - Safety (ISO 21789:2009,IDT) ICS april 2009

Nederlandse norm. NEN-EN-ISO (en) Medische hulpmiddelen - Kwaliteitsmanagementsystemen - Eisen voor reguleringsdoeleinden (ISO 13485:2016,IDT)

Nederlandse norm. NEN-EN-ISO 6416 (en) Hydrometrie - Meting van debiet met de ultrasone transitietijd (Time of Flight ) methode (ISO 6416:2017,IDT)

Nederlandse norm. NEN-EN-ISO (en)

DRAFT. Nederlandse norm. NEN 8654 (en) Fitted finger protection devices for hinged doors for intensive use - Safety requirements and test methods

Nederlandse norm. NEN-EN-IEC (en)

Voorbeeld. Preview INTERNATIONAL STANDARD ISO

Nederlandse norm. NEN-EN (en) Soil improvers and growing media - Determination of plant response - Part 2: Petri dish test using cress

Nederlandse norm. NEN-EN-ISO (en)

Nederlandse norm. NEN-EN (en) Verkeersregelinstallaties - Verkeerslichten. Traffic control equipment - Signal heads

Nederlandse norm. NEN-EN (en) Hijskranen - Lichte kraansystemen. Cranes - Light crane systems. Vervangt NEN-EN 16851:2015 Ontw.

Nederlandse norm. NEN-EN-ISO (en)

Nederlandse norm. NEN-EN (en) Doucheafscheidingen - Functionele eisen en beproevingsmethoden

Nederlandse norm. NEN-ISO (en) Hydrogen generators using water electrolysis process - Part 2: Residential applications (ISO :2011,IDT)

Nederlandse norm. NEN-EN (en) Validation of arc welding equipment. Vervangt NEN-EN 50504:2007 Ontw. ICS

Voorbeeld. Preview. NEN-EN-ISO (en) Dit document is een voorbeeld van NEN / This document is a preview by NEN. Nederlandse

Nederlandse norm. NEN-EN A1 (en) Aangedreven mobiele stelllingen - carrouselinstallaties en opslagliften - Veiligheidseisen

TECHNICAL REPORT. Solar Energy - Field Pyranometers - Recommended practice for use

Voorbeeld. Preview ISO/TS TECHNICAL SPECIFICATION. Fire protection Portable and wheeled fire extinguishers Part 2: Inspection and maintenance

Nederlandse norm NEN-EN (en) Footwear protecting against chemicals - Part 1: Terminology and test methods. Vervangt NEN-EN :2004 Ontw.

Voorbeeld. Preview. NEN-IEC (en) Nederlandse. Dit document is een voorbeeld van NEN / This document is a preview by NEN

Nederlandse norm. NEN-EN-IEC (en)

Nederlandse praktijkrichtlijn. NPR-IEC/TR (en)

Nederlandse norm. NEN-EN-ISO (en)

Voorbeeld. Preview. NEN-EN-ISO 1736 (en)

Nederlandse norm. NEN-EN-IEC (en)

Nederlandse norm. NEN-EN-ISO (en)

Nederlandse norm. NEN-EN 1762 (en)

Nederlandse praktijkrichtlijn. NPR-CEN/TS (en) Conservering van cultureel eigendom - Verlichting voor de tentoonstelling van cultureel eigendom

ILNAS-EN ISO :2005

Nederlandse norm. NEN-EN (en)

Nederlandse voornorm. NVN-IEC/TS (en)

Nederlandse norm. NEN-EN (en) Vliesgevels - Productnorm. Curtain walling - Product standard. Vervangt NEN-EN 13830:2003; NEN-EN 13830:2013 Ontw.

NEN-EN-IEC

Nederlandse norm. NEN-EN-ISO (en)

Nederlandse norm. NEN-EN-ISO (en)

ILNAS-EN ISO 2692:2006

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Nederlandse norm. NEN-EN-ISO 9806 (en) Zonne-energie - Thermische zonnecollectoren - Beproevingsmethoden (ISO 9806:2017,IDT)

Nederlandse norm. NEN-EN 9132 (en) Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking

Nederlandse norm. NEN-EN-ISO (en)

Nederlandse norm. NEN-EN (en)

ICS Supersedes HD S1: A1:2000. English version

Nederlandse norm. NEN-EN A1 (en) Met gas gestookte centrale verwarmingsketels - Deel 1: Algemene eisen en beproevingen

Voorbeeld. Preview ISO INTERNATIONAL STANDARD

Voorbeeld. norm Stof- en kiemarme ruimten en omgevingen - Deel 4: Ontwerp, constructie en opstarten (ISO :2001,IDT) Preview

Voorbeeld. Preview. Nederlandse norm. Dit document is een voorbeeld van NEN / This document is a preview by NEN

Nederlandse norm. NEN-EN (en)

Nederlandse norm. NEN-EN-ISO (en)

Nederlandse norm. NEN-EN-ISO (en) Gereedschapsmachines - Veiligheid - Stationaire slijpmachines (ISO 16089:2015,IDT)

Voorbeeld INTERNATIONAL STANDARD. Preview IEC Electrical installations in ships Part 306: Equipment Luminaires and lighting accessories

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General

This document is a preview generated by EVS

This document is a preview generated by EVS

Nederlandse norm NEN-ISO/IEC/IEEE

Nederlandse norm. NEN-EN (en) Vaste brandblusinstallaties - Automatische sprinklerinstallaties - Ontwerp, installatie en onderhoud

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties

Nederlandse norm. NEN-EN-ISO (en)

Nederlandse norm. NEN-EN (en)

Nederlandse norm. NEN-EN (en)

Transcription:

Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst voor netwerkgebruik met NEN is afgesloten. This document may only be used on a stand-alone PC. Use in a network is only permitted when a supplementary license agreement for us in a network with NEN has been concluded. Nederlandse norm NEN-EN-ISO 11073-10404 (en) Health informatics - Personal health device communication - Part 10404: Device specialization - Pulse oximeter (ISO/IEEE 11073-10404:2010,IDT) Vervangt NEN-ISO/IEEE 11073-10404:2010 ICS 11.040.55; 35.240.80 maart 2011

NEN-EN-ISO 11073-10404 Als Nederlandse norm is aanvaard: - EN ISO 11073-10404:2011,IDT - ISO/IEEE 11073-10404:2010,IDT Normcommissie 303006 "Informatievoorziening in de zorg" Apart from exceptions provided by the law, nothing from this publication may be duplicated and/or published by means of photocopy, microfilm, storage in computer files or otherwise, which also applies to full or partial processing, without the written consent of the Netherlands Standardization Institute. The Netherlands Standardization Institute shall, with the exclusion of any other beneficiary, collect payments owed by third parties for duplication and/or act in and out of law, where this authority is not transferred or falls by right to the Reproduction Rights Foundation. Auteursrecht voorbehouden. Behoudens uitzondering door de wet gesteld mag zonder schriftelijke toestemming van het Nederlands Normalisatie-instituut niets uit deze uitgave worden verveelvoudigd en/of openbaar gemaakt door middel van fotokopie, microfilm, opslag in computerbestanden of anderszins, hetgeen ook van toepassing is op gehele of gedeeltelijke bewerking. Het Nederlands Normalisatie-instituut is met uitsluiting van ieder ander gerechtigd de door derden verschuldigde vergoedingen voor verveelvoudiging te innen en/of daartoe in en buiten rechte op te treden, voor zover deze bevoegdheid niet is overgedragen c.q. rechtens toekomt aan de Stichting Reprorecht. Although the utmost care has been taken with this publication, errors and omissions cannot be entirely excluded. The Netherlands Standardization Institute and/or the members of the committees therefore accept no liability, not even for direct or indirect damage, occurring due to or in relation with the application of publications issued by the Netherlands Standardization Institute. Hoewel bij deze uitgave de uiterste zorg is nagestreefd, kunnen fouten en onvolledigheden niet geheel worden uitgesloten. Het Nederlands Normalisatie-instituut en/of de leden van de commissies aanvaarden derhalve geen enkele aansprakelijkheid, ook niet voor directe of indirecte schade, ontstaan door of verband houdend met toepassing van door het Nederlands Normalisatie-instituut gepubliceerde uitgaven. 2011 Nederlands Normalisatie-instituut Postbus 5059, 2600 GB Delft Telefoon (015) 2 690 390, Fax (015) 2 690 190

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM NEN-EN-ISO 11073-10404:2011 EN ISO 11073-10404 March 2011 ICS 35.240.80 English Version Health informatics - Personal health device communication - Part 10404: Device specialization - Pulse oximeter (ISO/IEEE 11073-10404:2010) Informatique de santé - Communication entre dispositifs de santé personnels - Partie 10404: Spécialisation des disposititfs - Oxymètre de pouls (ISO/IEEE 11073-10404:2010) Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit - Teil 10404: Gerätespezifikation - Pulsoximeter (ISO/IEEE 11073-10404:2010) This European Standard was approved by CEN on 23 April 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11073-10404:2011: E

EN ISO 11073-10404:2011 (E) NEN-EN-ISO 11073-10404:2011 Contents Foreword...3 Page 2

NEN-EN-ISO 11073-10404:2011 EN ISO 11073-10404:2011 (E) Foreword The text of ISO/IEEE 11073-10404:2010 has been prepared by Technical Committee ISO/TC 215 "Health informatics" of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11073-10404:2011 by Technical Committee CEN/TC 251 Health informatics the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by September 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO/IEEE 11073-10404:2010 has been approved by CEN as a EN ISO 11073-10404:2011 without any modification. 3

NEN-EN-ISO 11073-10404:2011 INTERNATIONAL STANDARD ISO/IEEE 11073-10404 First edition 2010-05-01 Health informatics Personal health device communication Part 10404: Device specialization Pulse oximeter Informatique de santé Communication entre dispositifs de santé personnels Partie 10404: Spécialisation des disposititfs Oxymètre de pouls Reference number ISO/IEEE 11073-10404:2010(E) ISO 2010 IEEE 2010

ISO/IEEE 11073-10404:2010(E) NEN-EN-ISO 11073-10404:2011 PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. Neither the ISO Central Secretariat nor IEEE accepts any liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies and IEEE members. In the unlikely event that a problem relating to it is found, please inform the ISO Central Secretariat or IEEE at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2010 IEEE 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO or IEEE at the respective address below. ISO copyright office Institute of Electrical and Electronics Engineers, Inc. Case postale 56 CH-1211 Geneva 20 3 Park Avenue, New York NY 10016-5997, USA Tel. + 41 22 749 01 11 E-mail stds.ipr@ieee.org Fax + 41 22 749 09 47 Web www.ieee.org E-mail copyright@iso.org Web www.iso.org Published in Switzerland ii ISO 2010 All rights reserved IEEE 2010 All rights reserved

NEN-EN-ISO 11073-10404:2011 ISO/IEEE 11073-10404:2010(E) Contents Page Foreword... v Introduction...vii 1. Overview... 1 1.1 Scope... 1 1.2 Purpose... 1 1.3 Context... 2 2. Normative references... 2 3. Definitions, acronyms, and abbreviations... 2 3.1 Definitions... 2 3.2 Acronyms and abbreviations... 3 4. Introduction to ISO/IEEE 11073 personal health devices... 3 4.1 General... 3 4.2 Introduction to IEEE 11073-20601 modeling constructs... 4 5. Pulse oximeter device concepts and modalities... 4 5.1 General... 4 5.2 Device types... 5 5.3 General concepts... 5 5.4 Collected data... 6 5.5 Derived data... 8 5.6 Stored data... 8 5.7 Device configurations... 8 6. Pulse oximeter DIM... 9 6.1 Overview... 9 6.2 Class extensions... 9 6.3 Object instance diagram... 9 6.4 Types of configuration... 10 6.5 MDS object... 11 6.6 Numeric objects... 14 6.7 Real-time sample array (RT-SA) objects... 24 6.8 Enumeration objects... 25 6.9 PM-store objects... 29 6.10 Scanner objects... 33 6.11 Class extension objects... 37 6.12 Pulse oximeter information model extensibility rules... 37 ISO 2010 All rights reserved IEEE 2010 All rights reserved iii

ISO/IEEE 11073-10404:2010(E) NEN-EN-ISO 11073-10404:2011 7. Pulse oximeter service model... 37 7.1 General... 37 7.2 Object access services... 37 7.3 Object access EVENT REPORT services... 40 8. Pulse oximeter communication model... 41 8.1 Overview... 41 8.2 Communications characteristics... 41 8.3 Association procedure... 42 8.4 Configuring procedure... 43 8.5 Operating procedure... 45 8.6 Time synchronization... 46 9. Test associations... 46 9.1 Behavior with standard configuration... 46 9.2 Behavior with extended configurations... 46 10. Conformance... 46 10.1 Applicability... 46 10.2 Conformance specification... 47 10.3 Levels of conformance... 47 10.4 Implementation conformance statements (ICSs)... 48 Annex A (informative) Bibliography... 52 Annex B (normative) Additional ASN.1 definitions... 53 Annex C (normative) Allocation of identifiers... 55 Annex D (informative) Message sequence examples... 57 Annex E (informative) PDU examples... 59 iv ISO 2010 All rights reserved IEEE 2010 All rights reserved

NEN-EN-ISO 11073-10404:2011 ISO/IEEE 11073-10404:2010(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is called to the possibility that implementation of this standard may require the use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or scope of patents or patent claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards Association. ISO/IEEE 11073-10404 was prepared by the 11073 Committee of the Engineering in Medicine and Biology Society of the IEEE (as IEEE Std 11073-10404-2008). It was adopted by Technical Committee ISO/TC 215, Health informatics, in parallel with its approval by the ISO member bodies, under the fast-track procedure defined in the Partner Standards Development Organization cooperation agreement between ISO and IEEE. Both parties are responsible for the maintenance of this document. ISO/IEEE 11073 consists of the following parts, under the general title Health informatics Personal health device communication (text in parentheses gives a variant of subtitle): Part 10101: (Point-of-care medical device communication) Nomenclature Part 10201: Domain information model Part 10404: Device specialization Pulse oximeter Part 10407: Device specialization Blood pressure monitor ISO 2010 All rights reserved IEEE 2010 All rights reserved v

ISO/IEEE 11073-10404:2010(E) NEN-EN-ISO 11073-10404:2011 Part 10408: (Point-of-care medical device communication) Device specialization Thermometer Part 10415: (Point-of-care medical device communication) Device specialization Weighing scale Part 10417: Device specialization Glucose meter Part 10471: (Point-of-care medical device communication) Device specialization Independant living activity hub Part 20101: (Point-of-care medical device communication) Application profiles Base standard Part 20601: (Point-of-care medical device communication) Application profile Optimized exchange protocol Part 30200: (Point-of-care medical device communication) Transport profile Cable connected Part 30300: (Point-of-care medical device communication) Transport profile Infrared wireless vi ISO 2010 All rights reserved IEEE 2010 All rights reserved

Bestelformulier Stuur naar: NEN Standards Products & Services t.a.v. afdeling Klantenservice Antwoordnummer 10214 2600 WB Delft NEN Standards Products & Services Postbus 5059 2600 GB Delft Vlinderweg 6 2623 AX Delft Ja, ik bestel ex. NEN-EN-ISO 11073-10404:2011 en Medische informatica - Communicatie tussen persoonlijke gezondheidsapparaten- Deel 10404: Apparaat specialisatie - Pols oximeter 161.21 T (015) 2 690 390 F (015) 2 690 271 www.nen.nl/normshop Wilt u deze norm in PDF-formaat? Deze bestelt u eenvoudig via www.nen.nl/normshop Gratis e-mailnieuwsbrieven Wilt u op de hoogte blijven van de laatste ontwikkelingen op het gebied van normen, normalisatie en regelgeving? Neem dan een gratis abonnement op een van onze e-mailnieuwsbrieven. www.nen.nl/nieuwsbrieven Gegevens Bedrijf / Instelling T.a.v. O M O V E-mail Klantnummer NEN Uw ordernummer BTW nummer Postbus / Adres Postcode Plaats Telefoon Fax Factuuradres (indien dit afwijkt van bovenstaand adres) Postbus / Adres Postcode Plaats Datum Handtekening Retourneren Fax: 015 2 690 271 E-mail: klantenservice@nen.nl Post: NEN Standards Products & Services, t.a.v. afdeling Klantenservice Antwoordnummer 10214, 2600 WB Delft (geen postzegel nodig). Voorwaarden De prijzen zijn geldig tot 31 december 2018, tenzij anders aangegeven. Alle prijzen zijn excl. btw, verzend- en handelingskosten en onder voorbehoud bij o.m. ISO- en IEC-normen. Bestelt u via de normshop een pdf, dan betaalt u geen handeling en verzendkosten. Meer informatie: telefoon 015 2 690 391, dagelijks van 8.30 tot 17.00 uur. Wijzigingen en typefouten in teksten en prijsinformatie voorbehouden. U kunt onze algemene voorwaarden terugvinden op: www.nen.nl/leveringsvoorwaarden. LEREN, WERKEN EN GROEIEN MET NEN preview - 2018