LM Tag Prevent theft before it occurs The only device on the market that has the ability to alert you before the product walks out the door Reduce fragance shrink by 50% Identifying product concealment When a product is concealed in a bag, under a coat, or in a pocket and there is movement of the product, the LM Tag turns on and counts down for a period of time and beeps lightly every second. Benefits: Dynamic system for any product and category Customers access product without staff assistance Maximize valuable retail space Minimal maintenance battery life 4 years
Reduce product sweep and increase sales Recommended solution for: Health and beauty Drugstore & pharma Checkout Consumer electronics Home & clothing DIY and more... LM Tag is designed to be applied anywhere on the product, allowing to best merchandise products and maximize retail space. LM Tag is the only device on the market that alarms at the point of theft, alerting before product walks out the door. Ease of shopping Tags are reusable, driving long term efficiencies No need to have produts locked and stored behind counters or in cabinets Adhesive pads can be reapplied at counter, long battery life LM tag is maximum security in minimal casing Maximize retail space Small tag size ensures minimal detraction from product No need to have produts locked and stored behind couters or in cabinets Product details: Tamper-proof plunger Replaceable adhesive back can be applied anywhere and doesn t damage packaging 90+ decibel speaker for alarm RF or AM feature for EAS gates Sensor for easy strobe key activation and deactivation LED light to indicate activity Security tag identification Replaceable battery Available in black or white 2(6)
LM Tag - What is it and how does it work? Introduction Theft notification at the point of concealment is the largest advantage of LM technology. LM Tag uses a combination of a light sensor and motion detector to recognize product concealment instantly at the shelf level providing a notification to store employees. It alarms at the point of theft, making it the only device on the market that has the ability to alert you before product walks out the door. There is a plunger on the bottom side of the tag. If the tag is removed, the plunger expands causing instant full alarm. LM tag adds another layer to store security as the the EAS gate is triggered from the internal EAS tag in the LM housing. The EAS gate will alarm when the tag moves through the space. Product features SPECIFICATIONS LM Tag size is 38 mm x 38 mm x 12.7mm Small size doesn t detract from product branding and adhesive back holds firmly to product without damaging packaging. Suitable for a large variety of boxed, blister-packed, and pegged items. The LM Tag is designed to be applied anywhere on the product, allowing you to best merchandise products and maximize retail space. With the LM Tag, items are not locked up or stored behind a desk, allowing customers to interact with the product and eliminating the need for additional staff assistance. After concealment and when set in motion the LM Tag pre-alarm (chirp sound) will notify for 12 seconds. After 12 seconds, the tag will alarm regardless of where the tag is located. The LM Tag is designed to be applied anywhere on the product, allowing you to best merchandise products and maximize retail space. 3(6)
LM alarm tag HOW IT WORKS In a bag, under a coat or slipped into a pocket. These are all places a would-be thief conceals product. By the time the thief walks out the door, it s too late. The LM Tag alarms at the point of concealment, preventing theft before it occurs. LM Tag alarms when: Monofilament is cut Device is removed from package Prolonged concealment and movement LM Tag is removed from the tag mount RF or AM features for EAS gates LMT LM Tag is avaliable in black and white. When concealed and in motion, the LM Tag first beeps a warning, then alarms. Removing the LM Tag triggers the alarm. Components CORNER ADAPTER CLIPS ANTI-SKID PADS ADHESIVE BACK LMCA LMC LM ASP LM RP Enhance security by using the corner adapter to prevent opening of product. LM Tag TM fits within Corner Adapter to create a seal, and can be used again and again. Form fitting alarm holder adaptable for LM Tag. Key accessory in making it appropriate for a wide variety of products and packaging types to be secured. Helps keep LM Tag in place when used with clip, and on slippery surfaces. Simply replace adhesive back to re-use LM Tag. Quick and easy to apply. 4(6)
Security wrap MONOFILAMENT SECURITY WRAP The LM Tag works with monofilament security wire, making it appropriate to wrap around a wide variety of products and packaging shapes and lengths. Wire provides a clear and unobtrusive security without interference to visual merchandising and packaging. The wire is available in 400 foot rolls and can be cut to various lengths for a custom secure fit. LMF LMW Wire provides a clear and unobtrusive security without interference to visual merchandising and packaging. Deactivators DISARM THE LM TAG Deactivators use a unique strobe light sequence to disarm the LM Tag. Unlike magnetic detachers which can be duplicated or defeated, no other deactivator on the market can replicate the light code. Available in personal handheld or countertop options. HANDHELD OPTION COUNTER TOP OPTION LM SD Light and easy to carry Compatible with SONIQTM Alarm Hook product line LM CTS Attaches with adhesive or hardware Can be mounted on top or side of counter 5(6)
LM Tag Prevent theft before it occurs!xperience The LM Tag TM uses the combination of a light sensor and motion detector to notify when the product is both in motion and concealed. It alarms at the point of theft, making it the only device on the market that has the ability to alert you before product walks out the door. HL DISPLAY AB Cylindervägen 18, Box 1118 131 26 Nacka Strand - Sweden Tel +46 8 683 73 00 info@hl-display.com www.hl-display.com