Domestic fans Circular duct fans Rectangular duct fans Roof fans xial fans Smoke evacuation fans TEX rated fans Corrosion resistant fans Domestic fans ccessories Wiring diagrams 0 Index
Content Centrifugal Grille Fascia CGF... xial Open Fascia OF... Centrifugal Smooth Fascia, with Heat Recovery Inline mixed Flow Plastic MFP... CSF... Centrifugal Smooth Fascia with Removable Motor CRM... Inline acoustic mixed flow MF SILENT... Inline Plastic xial Centrifugal Smooth Fascia with Removable Motor for recessed application CRM-R... Inline Centrifugal Plastic IP... 0 SCF... xial Grille Fascia GF... GS... Inline Centrifugal Plastic CPF... xial Smooth Fascia with Heat Recovery SHR... xial Grille Fascia with Heat Recovery GHR... xial Smooth Fascia SF... We reserve the right to make changes without prior notice
Centrifugal grille fascia CGF Dimensions Ød C Description centrifugal fan to extract air directly through the wall or through a small ducting system. Suitable for wall and ceiling mounting. Comes complete with backdraft shutter to prevent the ingress of air or external odours. Standard version with options of, Timer, humidity sensor,and PIR sensor. Easy to remove washable filter. Made of S material with IPX protection. lternate Versions: CGF- s above CGF-T utomatic run on timer with setting of - minutes CGF-HT utomatically starts the fan when the humidity raises above the preset level. Settings available from 0%-0% RH CGF-PIR PIR sensor automatically starts the fan when presence is detected within the room C Ød m kg CGF 0, 0,0 0 Ordering example Version CGF We reserve the right to make changes without prior notice 0--0
Centrifugal grille fascia CGF Frequency Hz Voltage V Electric Power Input W Current (*): Regulation /0 does not apply if electric power input < 0 W r.p.m Maximum air capacity m³/h Sound pressure level at m d() Max. operating température C SEC class IP CGF 0 0 0 0, 00 +0 * X 0 We reserve the right to make changes without prior notice 0--0
Centrifugal with Heat recovery CSF Dimensions Description Domestic fan with Energy Recovery up to 0%; Ideal for domestic applications and suitable for single room; Wall and/or panel mounting; Heat exchanger in PVC welded plates; Twin centrifugal fan; Polyurethane filters for higher protection and long life; Pre-heating system (PH model) consists of a 0W coil with thermostat fitted in the inlet duct made of self extinguishing material; standard version with options of Timer and Pre-heated for cold climates model. This unit carries an IPX rating. lternate Versions: CSF- s above CSF-T utomatic run on timer with setting of - minutes CSF-PH vailable with a pre heater for cooler climates C Ød m kg CSF 00,0 0 Ordering example Version CSF We reserve the right to make changes without prior notice 0--0
Centrifugal with Heat recovery CSF Frequency Hz Voltage V Electric Power Input W Current r.p.m Maximum air capacity supply m³/h exhaust m³/h (*): Regulation /0 does not apply if electric power input per airflow< 0 W Sound pressure level at m d() Max. operating température C CSF- 0 0 0 0 0, 00 0 0 -/+ * X CSF-T 0 0 0 0 0, 00 0 0 -/+ * X CSF-PH 0 0 0 0 0, 00 0 0 -/+ * X SEC class IP 0 We reserve the right to make changes without prior notice 0--0
Centrifugal with removable motor CRM Dimensions Description Centrifugal fans to extract air through ducting from Ø0; Suitable for wall/ceiling mounting even through ducts in awkward places thanks to the position of the outlet hole in the corner; Double ; ackdraught shutter to prevent ingress of air and external odours; Simple to remove washable filter; For ducts Ø0-00; Standard version with options of, Timer, Humidity model options; ody and grille in white S; IPX protected (EN 0), C working temperature; In accordance with Standard EN 0--0. lternate Versions CRMS Performance CRMM Medium Performance CRML Performance CRM(X)- s above CRM(X)-T utomatic run on timer with setting of - minutes CRM(X)-HT utomatically starts the fan when the humidy raises above the preset level. Settings available from 0%-0% RH C Ød m kg CRMS,,0 CRMM 00 00,,0 CRML 00 00,,0 0 Ordering example Version CRM We reserve the right to make changes without prior notice 0--0
Centrifugal with removable motor CRM 0 Frequency Hz Voltage V Electric Power Input W Current r.p.m (*): Regulation /0 does not apply if electric power input < 0 W Maximum air capacity Sound pressure level at m d() Max. operating température C CRMS- 0 0-0 0,0 0, 00 00 0 0 0 + * X CRMS-T 0 0-0 0,0 0, 00 00 0 0 0 + * X CRMS-HT 0 0-0 0,0 0, 00 00 0 0 0 + * X CRMM- 0 0-0 0 0, 0, 00 0 0 0 + F X CRMM-T 0 0-0 0 0, 0, 00 0 0 0 + F X CRMM-HT 0 0-0 0 0, 0, 00 0 0 0 + D X CRML- 0 0-0 0 0, 0, 00 0 0 0 + F X CRML-T 0 0-0 0 0, 0, 00 0 0 0 + F X CRML-HT 0 0-0 0 0, 0, 00 0 0 0 + E X SEC class IP 0 We reserve the right to make changes without prior notice 0--0
Centrifugal with removable motor- recessed Dimensions CRM-R Description Centrifugal fans to extract air through ducting from Ø0; Suitable for wall/ceiling mounting even through ducts in awkward places thanks to the position of the outlet hole in the corner; Double ; ackdraught shutter to prevent ingress of air and external odours; Simple to remove washable filter; For ducts Ø0-00; Standard version with options of, Timer, Humidity model options; ody and grille in white S; IPX protected (EN 0), C working temperature; In accordance with Standard EN 0--0. lternate Versions CRMS Performance CRMM Medium Performance CRML Performance CRM(X)- s above CRM(X)-T utomatic run on timer with setting of - minutes CRM(X)-HT utomatically starts the fan when the humidity raises above the preset level. Settings available from 0%-0% RH C Ød m kg CRMS-R 0,0 CRMM-R 00 00,,0 CRML-R 00 00,,0 0 Ordering example Recessed Version CRM R We reserve the right to make changes without prior notice 0--0
lindab technical information - domestic fans Centrifugal with removable motor- recessed CRM-R 0 Frequency Hz Voltage V Electric Power Input W Current r.p.m (*): Regulation /0 does not apply if electric power input < 0 W Maximum air capacity Sound pressure level at m d() Max. operating température C CRMS-R- 0 0-0 0, 0, 00 00 0 + * X CRMS-R-T 0 0-0 0, 0, 00 00 0 + * X CRMS-R-HT 0 0-0 0, 0, 00 00 0 + * X CRMM-R- 0 0-0 0 0, 0, 00 0 0 0 + F X CRMM-R-T 0 0-0 0 0, 0, 00 0 0 0 + F X CRMM-R-HT 0 0-0 0 0, 0, 00 0 0 0 + D X CRML-R- 0 0-0 0 0, 0, 00 0 0 0 + F X CRML-R-T 0 0-0 0 0, 0, 00 0 0 0 + F X CRML-R-HT 0 0-0 0 0, 0, 00 0 0 0 + E X SEC class IP We reserve the right to make changes without prior notice 0--0
xial Grille Fascia GF Dimensions C Ød Description n axial fan with grille fascia to extract the air directly through the wall or ceiling with little or no duct run. Standard version with options of, Timer, humidity sensor and PIR sensor. Made of S material and has IP protection. lternate Versions GF(X)- s above GF(X)-T utomatic run on timer with setting of -0 minutes GF(X)-TH utomatically starts the fan when the humidity raises above the preset level. Settings available from 0%-0% RH Ød C m kg GF00 00 0 0 0, GF 0 0, GF0 0 0 0 0,0 0 Ordering example Size Version GF 00 We reserve the right to make changes without prior notice 0--0
xial Grille Fascia GF 0 Frequency Hz Voltage V Electric Power Input W Current (*): Regulation /0 does not apply if electric power input < 0 W r.p.m Maximum air capacity m³/h Sound pressure level at m d() Max. operating température C SEC class IP GF 00 0 0-0 0,0 00 + * GF 0 0-0 0,00 00 + * GF 0 0 0-0 0,0 00 + * We reserve the right to make changes without prior notice 0--0
xial Grille Fascia with shutter GS Dimensions C Ød Description n axial fan with grille fascia to extract the air directly through the wall or ceiling with little or no duct run. Standard version with options of, Timer, humidity sensor and PIR sensor. Made of S material and has IP protection. lternate Versions GS(X)- s above GS(X)-T utomatic run on timer with setting of -0 minutes GS(X)-H utomatically starts the fan when the humidity raises above the preset level. Settings available from 0%-0% RH GS is equipped with automatic shutter. Ød C m kg GS00 00 0 0 0, GS 0, GS0 0 0,0 0 Ordering example Size Version GS 00 We reserve the right to make changes without prior notice 0--0
xial Grille Fascia with shutter GS 0 Frequency Hz Voltage V Electric Power Input W Current (*): Regulation /0 does not apply if electric power input < 0 W r.p.m Maximum air capacity m³/h Sound pressure level at m d() Max. operating température C SEC class IP GS 00 0 0-0 0,0 00 + * GS 0 0-0 0,00 00 + * GS 0 0 0-0 0,0 00 + * We reserve the right to make changes without prior notice 0--0
xial with heat recovery SHR Dimensions Description The single-room ventilator SHR with its smooth finish fascia is an easy and effective solution for arranging of decentralized energy saving ventilation in separate rooms, cottages, public and coercial premises. The fan is designed both for reversible mode with energy regeneration and for supply or extract mode with no regeneration. hand held controller comes as part of the unit when supplied. The high-tech ceramic energy accumulator with regeneration efficiency up to 0% is used for extract air heat energy recovery and supply air heating. Due to its cellular structure, the unique energy accumulator has larger air contact area and excellent heat conducting and accumulating properties. The square telescopic air ducts in the in the SHR ventilators are made of polymer coated metal lined with insulating material and round air ducts are made of PVC plastic. The telescope length is adjustable to the wall thickness which makes mounting quick and easy. This product has an IP rating. lternate Versions: SHR-00 Comes with 00 telescopic duct SHR-0 Comes with 0 telescopic duct SHR-0 Comes with 0 telescopic duct Ød C E F G m kg SHR-00 0 0 0 00 0 0,00 SHR-0 0 0 0 0 0 0 00, SHR-0 0 0 0 0 0 00, 0 Ordering example code Dimension Ød SHR 00 We reserve the right to make changes without prior notice 0--0
xial with heat recovery SHR Frequenc y Hz Voltage V Electric Power Input W Current r.p.m (*): Regulation /0 does not apply if electric power input < 0 W Maximum air capacity Sound pressure level at m d() Max. operating température C SHR-00 0/0 0,0,, 0,0 0,0 0,0 0 0 0-0/0 * SHR-0 0/0 0,,,0 0,0 0,0 0,0 0 0 0 0 0-0/0 * SHR-0 0/0 0,0,, 0,0 0,0 0,0 0 00 0 0-0/0 * SEC class IP 0 We reserve the right to make changes without prior notice 0--0
xial with Heat Recovery GHR Dimensions Description The single-room ventilator GHR with its grille finish fascia is an easy and effective solution for arranging of decentralized energy saving ventilation in separate rooms, cottages, public and coercial premises. The fan is designed both for reversible mode with energy regeneration and for supply or extract mode with no regeneration. hand held controller comes as part of the unit when supplied. The high-tech ceramic energy accumulator with regeneration efficiency up to 0% is used for extract air heat energy recovery and supply air heating. Due to its cellular structure, the unique energy accumulator has larger air contact area and excellent heat conducting and accumulating properties. The square telescopic air ducts in the GHR ventilators are made of polymer coated metal lined with insulating material and round air ducts are made of PVC plastic. The telescope length is adjustable to the wall thickness which makes mounting quick and easy. This product has an IP rating. lternate Versions GHR-00 Comes with 00 telescopic duct GHR-0 Comes with 0 telescopic duct GHR-0 Comes with 0 telescopic duct Ød C E F G m kg GHR-00 0 00 0 0 0,00 GHR-0 0 0 0 0 00, GHR-0 0 0 0 0 00, 0 Ordering example code Dimension Ød GHR 00 We reserve the right to make changes without prior notice 0--0
xial with Heat Recovery GHR Frequenc y Hz Voltage V Electric Power Input W Current r.p.m (*): Regulation /0 does not apply if electric power input < 0 W Maximum air capacity Sound pressure level at m d() Max. operating température C GHR-00 0/0 0,0,, 0,0 0,0 0,0 0 0 0-0/0 * GHR-0 0/0 0,,,0 0,0 0,0 0,0 0 0 0 0 0-0/0 * GHR-0 0/0 0,,, 0,0 0,0 0,0 0 0-0/0 * SEC class IP 0 0 We reserve the right to make changes without prior notice 0--0
xial Smooth Fascia SF Dimensions Description n axial fan with smooth fascia to extract the air directly through the wall or ceiling with little or no duct run. Standard version with options of, Timer, humidity sensor. Made of S material and has IP protection. lternate Versions: SF- s above SF-T utomatic run on timer with setting of -0 minutes SF-HT utomatically starts the fan when the humidity raises above the preset level. Settings available from 0%-0% RH C Ød E m kg SF00 00 0, SF 0 0, SF0 0 0, 0 Ordering example Size Version SF 00 We reserve the right to make changes without prior notice 0--0
xial Smooth Fascia SF 0 Frequency Hz Voltage V Electric Power Input W Current (*): Regulation /0 does not apply if electric power input < 0 W r.p.m Maximum air capacity m³/h Sound pressure level at m d() Max. operating température C SEC class IP SF 00 0 0-0 0,0 00 +0 * SF 0 0-0 0,00 00 +0 * SF 0 0 0-0 0,0 00 +0 * We reserve the right to make changes without prior notice 0--0
xial OF Description Innovative exhaust fan with stylish design for new comfort level in shower rooms, bathrooms, kitchens and other residential premises. This product has an IP rating. Intellectual integrated control functions let adjust personal settings for the most balanced microclimate. Unique motor design and aerodynamic impellor profile ensures minimum noise levels with maximum airflows. The standard model comes with intellectual functions: Humidity mode The fan is equipped with an intellectual humidity sensor with three operation modes: - SLEEP: the fan is ready to accept a signal from the humidity sensor or external switch. - SILENT: optimum humidity extraction mode that provides sufficient air capacity (up to m /h) combined with silent operation. - MX: excessive humidity extraction mode with highest and maximum air capacity (up to m /h). Timer mode The fan is equipped with three timers: - HUMIDITY TIMER: setting of the fan operation for total humidity extraction after its stabilization (0,, 0 min). - TURN-OFF TIMER: the fan continues operation for, or 0 minutes after activation of the motion sensor or the external switch and then reverts to the previous operation mode. - SWITCH DELY TIMER: adjust the switch delay timer to avoid the fan unnecessary switching if you use your bathroom shortly and frequently. fter humidity increases or after signal from the external switch/motion sensor, the fan switches to higher not iediately, but after the timer countdown (0, and minutes). mode The fan has smooth ten step control: - for SILENT mode: from 0/ to / m /h (Ø /00 ); - for MX mode: from / to /0 m /h (Ø /00 ); Hours mode Permanent low- operation mode ensures continuous minimum air exchange in the room with air capacity 0/ m /h (Ø /00 ). fter humidity change the fan is switched to MX mode (by default) or SILENT mode. The fan is switched to SILENT mode after signal from the motion sensor or external switch. utomatic interval ventilation Integrated function of automatic ventilation switching. Once in hours the fan is switched on for hours to ventilate the premise with air capacity / m /h (Ø /00 ). lternate Versions OF s bove OFC eing equipped with a temperature sensor OFC can detect a heat level increase and ensure efficient ventilation by balancing warm air streams among spaces. Maximum air capacity up to m /h Dimensions C m kg OFC 00/ 0 0, OF 00/ 0 0, C Ød 0 Ordering example code Dimension Ød OF 00/ We reserve the right to make changes without prior notice 0--0
xial OF OF/OFC Connexion diameter 00 Mode hours SILENT MX hours SILENT MX Frequency Hz Voltage V Electric Power Input W 0 0 up to. W 0 0 up to. W Maximum air capacity m³/h 0 0 ir Flow Control Range m³/h - - -0-0- - Sound pressure level at m d() Max. operating températur e C SEC class IP + * + * (*): Regulation /0 does not apply if electric power input < 0 W 0 We reserve the right to make changes without prior notice 0--0
Inline mixed flow plastic MFP Dimensions Description The MFP fans have wide capabilities and high performance combining the characteristics of axial and centrifugal fans and are specifically designed for supply and exhaust ventilation of premises requiring high pressure, powerful air flow and low noise level. The fans are compatible with round air ducts from Ø 00 to. The fan casing is made of high quality and durable low-flaable polypropylene. The removable impeller and motor block with a terminal box is fixed to the casing assembled with the spigots by means of special clamps with latches. The fan is typically controlled via a standard thyristor controller and has an IPX rating. lternative Versions: MFP s bove MFP-T utomatic run on time with setting of -0 Minutes ØD L H m kg MFP00 0, MFP, MFP0 0,0 MFP0 0, MFP00, MFP0,0 MFP 0 0,0 0 Ordering example code Dimension Ød MFP 00 We reserve the right to make changes without prior notice 0--0
Inline mixed flow plastic MFP 0 We reserve the right to make changes without prior notice 0--0
Inline mixed flow plastic MFP Frequency Hz Voltage V Electric Power Input W Current r.p.m Maximum air capacity (*): Regulation /0 does not apply if maximum air capacity is >000 m /h Sound pressure level at m d() Max. operating température C MFP 00 0/0 0 0, 0,0 0 00 0 +0 C X MFP 0/0 0 0 0, 0, 00 0 0 0 +0 X MFP 0/0 0/0 0 0 0, 0, 0 0 +0 X MFP 00 0/0 0 0 0, 0, 0 00 0 +0 X MFP 0 0/0 0 0, 0, 0 00 0 +0 * X MFP 0/0 0 0 0,,00 0 0 00 0 +0 * X MFP 00 MFP MFP 0/0 MFP 00 MFP 0 MFP Sound-power level L W d() Octave-frequency band 0 00 K K K K SEC class to inlet 0 to outlet 0 to environment to inlet to outlet to environment to inlet 0 to outlet to environment 0 to inlet 0 0 0 to outlet 0 to environment to inlet to outlet 0 0 to environment 0 to inlet 0 to outlet 0 0 to environment 0 to inlet to outlet to environment 0 0 to inlet 0 0 to outlet to environment 0 0 to inlet to outlet to environment 0 to inlet to outlet 0 to environment 0 to inlet 0 0 to outlet 0 to environment 0 0 to inlet 0 to outlet to environment 0 IP Total 0 We reserve the right to make changes without prior notice 0--0
Inline acoustic mixed flow MF SILENT Dimensions 0 Description MF Silent fans are enclosed in a specially designed soundinsulated casing that ensures silent fan operation in combination with high aerodynamic characteristics. The fans are compatible with round air ducts from Ø 00 up to. The MF Silent fans combine wide capabilities and high performance characteristics of both axial and centrifugal fans, thus providing powerful air stream and high pressure. The fans are recoended as a component of the air handling systems for various coercial and industrial premises with high requirements to noise levels. The external casing is made of polymer-coated steel. The inner casing perforation let sound waves pass through the holes and fall at a specific angle to the sound-absorbing layer. The casing is internally heat- and the sound-insulated with 0 mineral wool layer. The specially perforated casing and sound-absorbing material provide sound attenuation in a broad frequency band. The inner casing and the impeller are made of high-quality durable plastic. The fan is typically controlled via a standard thyristor controller and has an IPX rating. lternative Versions: MF Silent s bove MF Silent - T utomatic run on time with setting of - 0 Minutes ØD Ø L H m kg MF SILENT00 0,0 MF SILENT,0 MF SILENT 0 0 0,0 MF SILENT 0 0 0,0 MF SILENT 00 0,00 MF SILENT 0 0,0 MF SILENT 0 0,0 Ordering example code Dimension Ød MF SILENT 00 We reserve the right to make changes without prior notice 0--0
Inline acoustic mixed flow MF SILENT 0 We reserve the right to make changes without prior notice 0--0
Inline acoustic mixed flow MF SILENT 0 Frequency Hz Voltage V Electric Power Input W Current r.p.m (*): Regulation /0 does not apply if maximum air capacity is >000 m /h Maximum air capacity Sound pressure level at m d() Max. operating température C MF SILENT 00 0/0 0 0, 0,0 0 00 0 0 +0 D X MF SILENT 0/0 0 0, 0, 0 0 0 0 +0 D X MF SILENT 0/0 0/0 0 0, 0,0 0 0 +0 C X MF SILENT 00 0/0 0 0 0, 0, 0 00 0 +0 C X MF SILENT 0 0/0 0 0, 0, 0 00 +0 * X MF SILENT 0/0 0, 0, 0 0 0 +0 * X Sound-power level L W Octave-frequency band 0 00 K K K K MF SILENT 00 to inlet SEC class to outlet 0 0 to environment MF SILENT to inlet to outlet to environment 0 MF SILENT 0/0 to inlet to outlet 0 to environment MF SILENT 00 to inlet to outlet 0 0 to environment 0 MF SILENT 0 to inlet 0 to outlet to environment MF SILENT to inlet to outlet 0 0 to environment Total IP 0 We reserve the right to make changes without prior notice 0--0
Inline plastic axial IP Dimensions Description Inline plastic axial fan for continuous or periodic ventilation of a shower room or bathroom. Casing and impellor made from highly durable S plastic. The intelligent design of the impellor makes it high efficeiency and very long life span. The fan is typically controlled via a light switch or with a standard thyristor controller. It has an IPX rating. ØD nom Ød L L m kg IP00 00 0, IP 0 0, IP0 0 00 0,0 0 Ordering example code Dimension Ød IP 00 We reserve the right to make changes without prior notice 0--0
Inline plastic axial IP 0 Frequency Hz Voltage V Electric Power Input W Current (*): Regulation /0 does not apply if electric power input < 0 W r.p.m Maximum air capacity m³/h Sound pressure level at m d() Max. operating température C SEC class IP IP 00 0/0 0-0 0,0 00 0 +0 * X IP 0/0 0-0 0,00 00 0 +0 * X IP 0 0/0 0-0 0,0 00 0 0 +0 * X We reserve the right to make changes without prior notice 0--0
Inline centrifugal plastic SCF Dimensions Description Centrifugal fans to extract air through ducting; Unique adjustment possibility for in-line or angled mounting; For ducts Ø00 and 0; The fan is typically controlled via a light switch or with a standard thyristor controller. The fan is made of S plastic. SCF Configuration In line ngled C Ød ØD m kg 0 0,0 0 0,0 0 Ordering example SCF We reserve the right to make changes without prior notice 0--0
Inline centrifugal plastic SCF Frequency Hz Voltage V Electric Power Input W Current r.p.m Maximum air capacity m³/h Sound pressure level at m d() Max. operating température C SEC class IP SCF 0 0-0 0 0, 0 +0 F X0 0 We reserve the right to make changes without prior notice 0--0
Inline Centrifugal Plastic CPF Dimensions Ød Ød C Description CPF fans are typically for supply and exhaust ventilation systems of coercial, office and other premises. Due to the corrosion-resistant durable plastic casing, these models are the perfect solution for the installation in humid applications such as bathrooms, kitchens etc. The casing is made of high-quality durable S plastic. The fans are equipped with waterproof terminal boxes. The product has an IPX rating. Ød C m kg CPF00 00 0 0 0,0 CPF 0 0 0,0 CPF 0 0 00 0, CPF 00 00 0,00 0 Ordering example code Dimension Ød CPF 00 We reserve the right to make changes without prior notice 0--0
Inline Centrifugal Plastic CPF 0 Frequency Hz Voltage V Electric Power Input W Current r.p.m Maximum air capacity m³/h Sound pressure level at m d() Max. operating température C SEC class IP CPF 00 0 0 0 0, 0 0 -/+0 C X CPF 0 0 0, 00 -/+0 X CPF 0 0 0 0 0, 0 -/+0 X CPF 00 0 0 0 0, 0 0 -/+0 X We reserve the right to make changes without prior notice 0--0