WE PROTECT HAZARDOUS ENVIRONMENTS EXPLOSION-PROOF AND HAZARDOUS LOCATION VISUAL & AUDIBLE SIGNALING PRODUCTS

WE PROTECT HAZARDOUS ENVIRONMENTS EXPLOSION-PROOF AND HAZARDOUS LOCATION VISUAL & AUDIBLE SIGNALING PRODUCTS

100+ YEARS Federal Signal is recognized as one of the industry s leading suppliers of safety and security products since 1901. Today, our team remains committed to the demand for value-added products, incorporating innovative engineering with the intent to offer our customers cost-effective product solutions. Federal Signal products come with our commitment to exceptional customer service and technical support. Working closely together with customers globally, our customer support team, engineers and technicians provide full range of products to assist with any application. CERTIFICATIONS Our products have been designed to meet or exceed the uncompromising standards of UL, CSA, ATEX, IECEx, and other global certifications. And with our ISO 9001 Certification, Federal Signal demonstrates its on-going commitment to quality. Achieving certification is just the beginning. Federal Signal hazardous location products routinely prove themselves, performing reliably in even the toughest operating environments.

GLOBAL SERIES GLOBAL SERIES NON-METALLIC DESIGN WAS DEVELOPED FOR LOW MAINTENANCE AND CORROSION RESISTANCE. Meeting stringent certifications, the Global Series is an innovative next generation product line of Glass Reinforced Polyester (GRP) signals that is modular, aesthetically appealing, and lighter weight in design. The patent pending modular housing design allows individual signals to be combined into multi-signal fixtures, which reduces the customer s installation and wiring burden. Coupling kits allow installers in the field to create multi-unit configurations. Multi-signal fixtures with 2-6 signals can be combined into multiple configurations. GLOBAL SERIES MODULAR DESIGN PROVIDES FLEXIBILITY COST-SAVINGS EASY INSTALLATION TOTAL COST OF OWNERSHIP 50.4% LOWER COST In comparison with traditional products, the Global Series is less expensive in terms of product cost, installation, labor and assembly. 45% SIGNAL DEVICES 16% INSTALL LABOR 22% INSTALLATION HARDWARE 36% 17% Traditional Signaling Devices ASSEMBLY LABOR Fixture comparison consists of 3 visual devices and one audible. 8% Global Series Platform 3.2% 2.4%

GLOBAL SERIES MODEL G-LED FLAMEPROOF & HAZARDOUS LOCATION LED BEACON Available in 24VDC and 120-240VAC 50/60Hz 50,000 hour LED array Corrosion-resistant GRP (Glass Reinforced Polyester) design Operating Temperature Range: -58ºF to 158ºF; -50ºC to +70ºC Stainless steel dome guard included Two M20 entries standard on Ex d models; Three M20 entries standard on Ex de models* IP enclosure, Type 4X 8 field selectable flash patterns including 60, 75 and 90 FPM Auto-sync available for AC flashing pattern products Zone 1, 21 Rated, IECEX, ATEX Ex d IIC, Ex de IIC and Ex tb IIIC UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; and Class III ABS MODEL G-STR FLAMEPROOF & HAZARDOUS LOCATION STROBE BEACON Available in 24VDC, 120VAC and 220-240VAC 50/60Hz 10,000 hour strobe tube Corrosion-resistant GRP design Operating Temperature Range: -58ºF to 158ºF; -50 C to 70 C Stainless steel dome guard included Two M20 entries standard on Ex d models; Three M20 entries standard on Ex de models* IP enclosure, Type 4X Zone 1, 21 Rated, IECEX, ATEX Ex d IIC, Ex de IIC and Ex tb IIIC UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; and Class III ABS * M25 end-cap available for Ex de models

MODEL G-SND GLOBAL SERIES FLAMEPROOF & HAZARDOUS LOCATION SOUNDER Available 3 operational voltages: 24VDC, 120VAC 50/60 Hz, and 230VAC 50/60 Hz Gain control; 15 Watt design Corrosion-resistant GRP design; IP enclosure Operating Temperature Range: -58ºF to 158ºF; -50ºC to +70ºC Two M20 entries standard on Ex d models; Three M20 entries standard on Ex de models* Zone 1, 21 Rated IECEx, ATEX Ex d IIC, Ex de IIC and Ex tb IIIC UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 1,Groups E, F and G; and Class III ABS MODEL G-SPK FLAMEPROOF & HAZARDOUS LOCATION LOUDSPEAKER Loudspeaker available in 70 Vrms or 100 Vrms Corrosion-resistant GRP design; IP enclosure Operating Temperature Range: -58ºF to 158ºF; -50ºC to +70ºC 15 Watt Design Two M20 entries standard on Ex d models; Three M20 entries standard on Ex de models* Zone 1, 21 Rated IECEx, ATEX Ex d IIC, Ex de IIC and Ex tb IIIC UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; and Class III Shown with stainless steel mounting U-bracket (optional) ABS MODEL G-SPA FLAMEPROOF & HAZARDOUS LOCATION AMPLIFIED SPEAKER Corrosion-resistant GRP design; IP enclosure Gain control Supports 3 operational voltages: 24VDC, 120VAC 50/60 Hz, and 230VAC 50/60 Hz Operating Temperature Range: -58ºF to 158ºF; -50ºC to +70ºC Two M20 entries standard on Ex d models; Three M20 entries standard on Ex de models* Zone 1, 21 Rated IECEx, ATEX Ex d IIC, Ex de IIC and Ex tb IIIC UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; and Class III ABS * M25 end-cap available for Ex de models

GLOBAL SERIES ACCESSORIES MODEL G-KIT-RP INDICATOR RING AND LEGEND PLATE KIT Available in six colors Includes customizable legend plate Associated hardware included MODEL G-KIT-ST SINGLE MOUNT U-BRACKET KIT Compatible with all Ex d models adjustable 316 Stainless steel adjustable U-Bracket Side mounts and associated hardware included MODEL G-KIT-DT DUAL MOUNT U-BRACKET KIT Compatible with any dual model 316 stainless steel adjustable U-Bracket Side mounts and associated hardware included WANT TO VISUALIZE GLOBAL SERIES IN 3D? 1 DOWNLOAD and launch the free Augment Reality app 2 3 SCAN a Global Series product on the previous pages or a product data sheet EXPERIENCE Global Series in Augment Reality

GLOBAL SERIES COUPLING KITS The accessories below allow single unit G-Series Ex de models to be coupled to other G-Series Ex de models. These kits allow installers in the field to create multi-unit configurations. Note: multi-unit configurations can be ordered pre-assembled according to a customer specification. The benefit of pre-assembled configurations is reduced on-site wiring and installation. MODEL G-KIT-EC90 90 e-box TO e-box END-CAP COUPLING KIT Kit includes one flanged e-box coupler end-cap, one coupler, one gasket and four mounting bolts MODEL G-KIT-EC180 IN-LINE e-box TO e-box END-CAP COUPLING KIT Kit includes two flanged e-box coupler end-caps, one coupler, one gasket and four mounting bolts MODEL G-KIT-ECSM SIDE MOUNT e-box TO e-box COUPLING KIT Kit includes one coupler, one gasket, and four mounting bolts MODEL G-KIT-EXTB* EXTENSION BOX KIT Kit includes e-box without terminal blocks and two M20 Plugs *Cannot be field assembled to Ex d models.

VISUAL SIGNALING MODEL WV450XL FLAMEPROOF LED BEACON Eight LED light patterns 50,000 hour LED Array Available voltage 24VDC, 110-220VAC Optional Ex de junction box Corrosion-resistant GRP (Glass Reinforced Polyester) housing Operating Temperatures: d version without terminal chamber ATEX -55 C to 55ºC (-67 F to 131 F) IECEx -55 C to 55ºC (-67 F to 131 F) de version with terminal chamber ATEX -20 C to 55ºC (-4 F to 131 F) IECEx -20 C to 55ºC (-4 F to 131 F) Stainless steel 316 dome guard and mounting bracket included M20 entries, standard, (3 x Ex de, 1 x Ex d) Shown with optional Ex de junction box Zone rated, IECEx, ATEX, Ex d IIB +H2 T6, Ex de IIB +H2 T6, IP 1.63"/ 41.3mm 2.25"/ 57.2mm 4.50"/ 114.3mm 11.16"/ 283.5mm 3.25" / 82.5 mm ø0.35/ø8.9 MODEL WV450XD / WV450XE FLAMEPROOF STROBE MODEL Available in 10, 15 and 21 Joule Units Xenon Strobe tube life of 10,000 hours Available voltages (±15%): 24-48VDC 15J units, 110VAC 10J/21J units, 220VAC 10J/21J units Optional Ex de junction box Corrosion resistant GRP (Glass Reinforced Polyester) Operating Temperatures: WV450XD d version without terminal chamber ATEX -55 C to 55ºC (-67 F to 131 F) IECEx -55 C to 55ºC (-67 F to 131 F) WV450XE de version with terminal chamber ATEX -20 C to 55ºC (-4 F to 131 F) IECEx -20 C to 55ºC (-4 F to 131 F) 316 Stainless steel dome guard and mounting Shown with optional Ex de junction box bracket included M20 entries, standard, (3 x Ex de, 1 x Ex d) Zone rated, IECEx, ATEX, Ex d IIB +H2 T3-T4, Ex de IIB +H2 T3-T4, IP 1. 63"/ 41.3 mm 2.25" / 57.2m m 4.50 "/ 114.3m m 11.16" / 283.5 mm 3.31" / 84.1 mm ø0.35/ø8.9

VISUAL SIGNALING MODEL 2000 SERIES FLAMEPROOF LED WARNING LIGHT Three remotely selectable flash patterns including steady 50,000 hour lamp life Operating Temperature: -40 F to 104 F; -40 C to 40 C Ex de terminal chamber available AC and DC voltage ranges Approved for use in Zone 1, 2, 21, 22 atmospheres Zone 1, 2, 21, 22 Ex d IIB T6 Ex td A21; Ex de IIB T6 Ex td A21 8.23 "/209 mm 11.3 "/287 mm 0.51 "/ 13 mm 2 8.86 "/ 225 mm 10.04 255 m MODEL 2000 SERIES XEN1 & XEN4 FLAMEPROOF STROBE WARNING LIGHTS 8.86 "/ 225 mm 9.84 "/ 250 mm Single and four strobe tube models Internal Fresnel lens 5,000 hour lamp life Operating Temperature: -40 F to 158 F; -40 C to 70 C Ex de terminal chamber available Operating voltages 24VDC, 48VDC, 110VDC and 110VAC, 240VAC IP Zone 1, 2, 21, 22 Ex d IIB T6 Ex td A21; Ex de IIB T6 Ex td A21 8.23 "/209 mm 11.3 "/287 mm 0.51 "/ 13 mm 10.04 "/ 255 mm

VISUAL SIGNALING MODEL 151XST HAZARDOUS LOCATION WARNING LIGHT Available in 12-24VDC, 120VAC and 240VAC 10,000 hour, high-intensity strobe Operating Temperature: -67 F to 150 F; -55 C to C Available in 3/4-inch NPT pipe mount or surface mount Dome guard included Indoor/outdoor use Type 4X, IP enclosure Marine Rated UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; and Class III 9.25 / 235 mm 5.5 /139.7 mm Dome Guard (Included) Glass Dome Strobe Tube Gasket 3/4 Pipe Mount Aluminum Base Notification Circuit Connection MODEL 154XST HAZARDOUS LOCATION STROBE WARNING LIGHT Strobe, 80 high intensity flashes per minute 8.18" / 207.8 mm 6.52" / 165.6 mm Dome Guard (Included) Glass Dome Strobe Tube Available in 24VDC 10,000 hour, high intensity strobe tube Operating Ambient Temperature: -67 F to 150 F; -55 C to C Aluminum Base 2x 3/4" NPT Entry Gasket Power Wires Indoor/Outdoor use Available in 3/4-inch NPT pipe mount or 5.58" / 141.6 mm surface mount IP, Type 4X 4-wired supervised power circuit UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; and Class III Select models available with ULC certification CSFM

VISUAL SIGNALING MODEL 191XL FLASHING LED HAZARDOUS LOCATION WARNING LIGHT Flashing mode standard, configurable to steady-burn Available in 24VAC/DC, 120-240VAC and 277VAC 50,000 hour, vibration resistant LED lamp Operating Temperature: -58 F to 150 F; -50 C to C Available in 3/4-inch NPT pipe mount or surface mount Dome guard included Type 4X, IP Enclosure, Marine Listed UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; and Class III 9.25" / 235 mm 5.5"/140 mm Glass Dome LED Array Gasket Aluminum Base 3/4" NPT Pipe Mount MODEL 224XST HAZARDOUS LOCATION STROBE WARNING LIGHT Strobe, 80 high intensity flashes per minute Available in 24VDC 10,000 hour, high intensity strobe tube Operating Temperature: -40 F to 104 F; -40 C to 40 C Indoor/Outdoor use 4-wired supervised power circuit IP, Type 4X UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; and Class III Strobe Tube 7.5 "/190.5 mm 1/2 " NPT Pipe Mount 5.5 "/139.7 mm Outer Dome Inner Fresnel Lens Retaining Screw

VISUAL SIGNALING MODEL 224XSTHI HAZARDOUS LOCATION HEARING IMPAIRED STROBE WARNING LIGHT 5.5 "/139.7 mm Strobe, 80 high intensity flashes per minute Available in 24VDC 10,000 hour, high intensity strobe tube, Clear lens Operating Temperature: -40 F to 104 F; -40 C to 40 C Indoor/Outdoor use 4-wired supervised power circuit IP, Type 4X Approved for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; and Class III UL Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; and Class III 7.5 "/190.5 mm Strobe Tube 1/2 " NPT Pipe Mount Outer Dome Inner Fresnel Lens Retaining Screw CSFM MODEL 225X HAZARDOUS LOCATION ROTATING WARNING LIGHT Available in 120VAC 25 watt incandescent lamp Operating Temperature: -40 F to 104 F; -40 C to 40 C 1/2-inch pipe mount Indoor/outdoor use Type 4X, IP enclosure UL listed for Class I, Division 2, Group A, B, C and D; Class II, Division 2, Groups F and G; and Class III

MODEL 225XL HAZARDOUS LOCATION LED FLASHING WARNING LIGHT Flashing mode standard, field configurable to Steady-burn Available in 24VAC/DC and 120-240VAC 50,000 hour, vibration-resistant LED lamp Operating Temperature: -31 F to 104 F; -35 C to 40 C Type 4X, IP UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; and Class I VISUAL SIGNALING 7.5 "/190.5 mm 5.5 "/139.7 mm 1/2 " Pipe Mount Outer Dome LED Array Inner Fresnel Lens MODEL 225XST / 225XST-I HAZARDOUS LOCATION STROBE WARNING LIGHT 5.5 "/139.7 mm Strobe, 80 high intensity flashes per minute Available in 12-24VDC, 120VAC and 240VAC 10,000 hour, high-intensity strobe tube Operating Temperature: -40 F to 104 F; -40 C to 40 C Model 225XST-I features a voltage in-rush limiting PCB design Type 4X, IP UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; and Class III CSA certified Strobe Tube 7.5 "/190.5 mm 1/2 " NPT Pipe Mount Outer Dome Inner Fresnel Lens Retaining Screw MODEL 371LEDX HAZARDOUS LOCATION ROTATING WARNING LIGHT Available in 120VAC 50,000 hour LED light source Operating Temperature: -31 F to 104 F; -35 C to 40 C Surface mount and integrated 1" NPT pipe mount Type 4X, IP enclosure UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; and Class III CSA certified 11.38" / 289 mm 3x.281" 7 mm 9.25" /235 mm 6.25" / 158.7 mm 30

VISUAL SIGNALING MODEL 27XL EXPLOSION-PROOF LED WARNING LIGHT Available in 24VAC/DC and 120-240VAC Flashing or steady-burn mode 50,000 hour LED Operating Temperature Range: -67ºF to 150ºF; -55 C to 65 C Available in a Explosion-proof supervised model 3/4" NPT pendent, ceiling and wall mount options available Dome guard optional Type 4X, IP enclosure, marine rated UL and cul Listed for Class I, Division 1 Groups C and D; Class I, Division 2, Groups A and B; Class II Division 1, Groups E, F and G; and Class III CSA certified 3/4 " NPT ø8.80"/ 224 mm 14. 54"/ 369 mm MODEL 27XST EXPLOSION-PROOF STROBE LIGHT Approved for mounting in any manner-including dome up Available in 24VDC and 120VAC 10,000 hour strobe tube Operating Temperature Range: -67ºF to 150ºF; -55 C to 65 C Available in a Explosion-proof supervised model 3/4" NPT pendent, ceiling and wall mount options available Dome guard optional Type 4X, IP enclosure, marine rated Marine Rated UL and cul Listed for Class I, Division 1 Groups C and D; Class I, Division 2, Groups A and B; Class II Division 1, Groups E, F and G; and Class III CSA certified 3/4 " NPT ø8.80"/ 224 mm 14.54 "/ 369 mm

VISUAL SIGNALING MODEL 27XST-024*-4-MOD EXPLOSION-PROOF ROTATING WARNING LIGHT Strobe, 80 high intensity flashes per minute Available in 24VDC 10,000 hour, high intensity strobe tube Operating Temperature Range: -67ºF to 150ºF; -55 C to 65 C Indoor/Outdoor use IP, Type 4X 4-wired supervised power circuit UL and cul Listed for Class I, Division 1 Groups C and D; Class I, Division 2, Groups A and B; Class II Division 1, Groups E, F and G; and Class III CSA certified ng unt 14.26"/ 362 mm A A 0.30"/8 mm 4X 3/4" NPT MODEL 24XST EXPLOSION-PROOF LED Standard FLASHING WARNING Strobe Model LIGHT Strobe, 80 high intensity flashes per minute Cast Aluminum Available in 24VDC Corrosion-Resistant 10,000 hour, high intensity strobe Explosion-Proof tube Operating Temperature Range: -67ºF to 150ºF; Housing -55 C to 65 C Indoor/Outdoor use High Intensity Strobe Tube IP, Type 4X Fresnel Lens 4-wired supervised power circuit Glass Dome UL and cul Listed for Class I, Division 1 Groups C and D; ø8.82"/ 224 mm Class I, Division 2,Groups A and B; Class II Division 1, Groups E, F and G; and Class III CSA certified Pendant 3/4" Mount NPT 14.54"/ 369 mm 11.37"/ 289 mm Ceiling Mount 14.26"/ 362 mm Wall Mount Bracket A 15.48"/ 393 mm A 0.30"/8 mm 4X 3/4" NPT 14.81"/ 376 mm 10.41"/ 264 mm 0.3 4X 2X ø0.27 [ø7] View A-A 6.92"/176 1-1 View ø8.80"/ 224 mm 5.25"/1

RANGE CERTIFICATIONS BEACONS, LIGHTS, and STROBES CERTIFICATIONS ABS CSFM IP RATING G-LED G-STR WV450XL & WV450XD 2000 - LED, XEN1 & XEN4 151XST 154XST 191XL PRODUCTS 224XST 24XSTHI 225X 225XL 225XST 224XST 27XL 27XST, 27XST-024-4 & 27XST-024*-4-MOD 24XST 371 LEDX

AUDIBLE SIGNALING MODEL 450EWBX HAZARDOUS LOCATION ELECTRONIC HORN Corrosion resistant non-metallic housing Available in 12-24VDC Operating Temperature: -65 F to 150 F; -54 C to C 94-99 dba @ 10' (104-109 dba @ 1m) depending on operating voltage, no duty cycle Four wire terminal block and supervisory diode NEMA Type 4X, IP, Marine rated UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G 4.39 "/ 111.5 mm 3X 1/2" NPT entry 5.00"/ 127.0 mm 5.69"/ 1 44.5 mm.19"/ 4.8 mm 1.88 "/ 47.6 mm 2X.32 "/ 8.2 mm 1.06 "/ 27.0 mm 3.88 "/ 98.6 mm MODEL 31X / 41X EXPLOSION-PROOF VIBRATING HORN 31X is available in 120VAC and 240VAC; 41X is available in 24VDC Operating Temperature: -31 F to 150 F; -35 C to C Corrosion-resistant cast aluminum housings Produces 100 dba @ 10' (110 dba @ 1m) UL and cul Listed for Class I, Division 1 Groups C and D; Class II, Division 1, Groups E, F and G; and Class III CSA certified 7.625" 193.68 mm 3/4" / 19 mm NPT 6.5" 165.1mm 6.5"/ 165.1 mm Cast Aluminum Corrosion- Resistant Housing 6.5" 165.1mm Die Cast Zinc Grille 3/4" / 19 mm NPT

AUDIBLE SIGNALING MODEL SSTX-MV / SSTX3-MV EXPLOSION-PROOF ELECTRONIC SIREN Multi-voltage design accepts 24VDC, 120VAC or 240VAC Operating Temperature: -67 F to +151 F; -55 C to + C SSTX produces one of four tones: Wail, Yelp, Horn & Temporal Slow Whoop SSTX3 produces three tones: Wail, Yelp & Horn, remote selectable 101-108 dba @ 10' (111-118 dba @ 1m) depending on tone NEMA 4X, IP approved UL and cul Listed for Class I, Division 1, Groups B, C, and D; Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III CSA certified Cast Aluminum Explosion Proof Housing 1.5 "/ 38 mm Mounting Bracket Detail 16.3 "/414 mm Spun Aluminum Projector Adjustable Mounting Bracket 13.1 "/ 332 mm 17"/ 431 mm 0.53"/ 5.53"/ 13 mm 140 mm 2.47"/ 63 mm MODEL P-LS2B / P-LS2C FLAMEPROOF CORROSION RESISTANT LOUDSPEAKER Corrosion-resistant anti-static GRP (Glass-Reinforced Polyester) design Stainless steel universal mounting bracket and hardware 10 preset power taps from 25 to 0.2 watts Two M20 x 1.5mm threaded conduit entries Ingress rated IP (P-LS2B) ATEX Zone 1 Rated Gas Group IIB (P-LS2C) ATEX Zone 1 Rated Gas Group IIC 1.18 / 30 mm 9.15 / 232.4 mm 12.55 / 318.8 mm Standard mounting plate included.59 / 15 mm 1.18 / 30 mm 1.18 / 30 mm Mounting Hole 2X.28 / 7 mm Center Hole.51 / 13 mm.71 / 18 mm Gland Entry 2X M20

AUDIBLE SIGNALING MODEL 110 & ES1 / 120 & ES4, ES5 FLAMEPROOF MARINE AND INDUSTRIAL LOUDSPEAKERS 8 watt, 110 dba output @ 1m 15 watt, 116 dba output @ 1m 25 watt, 123 dba output @ 1m Integrated Speaker Monitoring and remote Tapping (I.S.M.T.) IP 120 & ES4, ES5 are IECEx, INMETRO and EAC only Zone 1 IIB and IIC approved 9.02" / 229.10 mm 6.14" / 156 mm 2 Mounting Holes 0.28 / 7 mm 5.55 / 141 mm 2 Mounting Holes 0.28" / 7.11 mm 12.4" / 315 mm 9.45" / 240.02 mm 7.32" / 186 mm 2 M20 Gland Entries 2 M20 Gland Entries 5.16"/ 131 mm 2 M20 Gland Entries 2 Mounting Holes 0.28" / 7.11 mm MODEL 300GCX / 302GCX HAZARDOUS LOCATION SPEAKER AMPLIFIER Available in 24VAC/DC, 120VAC and 240VAC Operating Temperature: -67 F to 150 F; -55 C to C Built-in gain control (volume) 300GCX produces 0-110 dba @ 10 feet (0-120 dba @ 1m) MODEL SHOWN 300GCX, 304GCX AND AM300GCX 302GCX produces 0-114 dba @ 10 feet (0-124 dba @ 1m) Type 4X enclosure UL Fire Listed and CSFM approved UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G CSFM 7.94" /201.7 mm Re-entrant Trumpet Horn-Type Loudspeaker Spun Aluminum Projector Full Speaker Rotation 5.63" / 143 mm 12.25" / 311.2 mm 6" /152.4 mm 8.25" /209.6 mm

AUDIBLE SIGNALING MODEL 304GCX / 314GCX PUBLIC ADDRESS HAZARDOUS LOCATION AMPLIFIED SPEAKER Available in 24VDC Operating Temperature: -40 F to 150 F; -40 C to C Built in gain control (volume) 304GCX produces 0-95 dba @ 10' (0-105 dba @ 1m) MODEL SHOWN 300GCX, 304GCX AND AM300GCX 314GCX produces 0-100 dba @ 10' (0-110 dba @ 1m) Type 4X enclosure UL Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G 7.94" /201.7 mm Re-entrant Trumpet Horn-Type Loudspeaker Full Speaker Rotation Select ULC Canadian Fire Listed model available (-CN) CSFM Spun Aluminum Projector 5.63" / 143 mm 12.25" / 311.2 mm MODEL AM300GCX / AM302GCX PUBLIC ADDRESS HAZARDOUS LOCATION SPEAKER Transformer coupled 25 or 70 Vrms Operating Temperature: -40 F to 150 F; -40 C to C Re-entrant horn design Type 4X enclosure AM300GCX is UL, ULC & CSFM, UL Fire Listed UL and cul Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G Select ULC Canadian Fire Listed model available (-CN) CSFM 6" /152.4 mm 10.5" /2.7 mm Re-entrant Trumpet Horn-Type Loudspeaker MODEL SHOWN 302GCX, 314GC AND AM302GCX Full Speaker Rotation 8.25" /209.6 mm Spun Aluminum Projector 14" / 355.6 mm 5.63" / 143 mm 6" /152.4 mm 11" /279.4 mm

AUDIBLE SIGNALING MODEL 300X / 302X EXPLOSION-PROOF AUDIBLE SIGNALING DEVICE Available in 24VAC/DC and 120/240VAC Operating Temperature: -67 F to 151 F; -55 C to C Digital Signal Amplification Fused input and output Built-in gain control 300X produces adjustable between 0-110 dba @ 10' (0-120 dba @ 1m) 302X produces 0-114 dba @ 10' (0-124 dba @ 1m) Type 4X, IP enclosure UL Fire Listed UL and cul Listed for Class I, Division 1, Groups B, C, and D; Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III Cast Aluminum Explosion Proof Housing 16.3"/414 mm Spun Aluminum Projector Adjustable Mounting Bracket 1-1/2 "/ 38 mm Mounting Bracket Detail 5.53 "/ 140 mm MODEL SHOWN 300X AND 304X 2.47 "/ 63 mm 13.1"/ 332 mm 0.53 "/ 13 mm 17"/ 431 mm CSFM MODEL 304X / 314X EXPLOSION-PROOF AUDIBLE SIGNALING DEVICE Available in 24VDC Operating Temperature: -40 F to 150 F; -40 C to C Digital signal amplification Fused input and output 304X adjustable between 0-91 dba @ 10' (0-101 dba @ 1m) 314X adjustable between 0-97 dba @ 10' (0-107 dba @ 1m) 4-wire supervised power circuit NEMA Type 4X, IP UL Listed for Class I, Division 1, Groups B, C, and D; Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III UL and CSFM approved CSFM Cast Aluminum Explosion Proof Housing 19.5 "/495 mm Adjustable Mounting Bracket Spun Aluminum Projector 1.5 "/ 38 mm Mounting Bracket Detail 5.53 "/ 140 mm MODEL SHOWN 302X AND 314X 2.47 "/ 63 mm 16.7 "/ 424 mm 0.53 "/ 13 mm 18.8 "/ 477 mm

HAZARDOUS LOCATION SIGNALING MODEL MPEX EXPLOSION-PROOF FIRE ALARM PULL STATION Available in 120VAC Highly visible red enclosure Two step process: Lift cover and pull down ring to activate 2 3/4" NPT conduit entries UL Listed for Class I, Division 1, Groups C & D; Class II, Division 1, Groups E, F and G; and Class III CSFM MODEL LHWB HAZARDOUS LOCATION LIGHT MOUNTING KIT IDEAL FOR USE WITH MODELS 151XST, 154XST, 191XL, 224XST, 224XST-HI, 225X, 225XL, 225XST, 225XST-I, 371LEDX Easy installation For wall mount applications Replaces unsightly and hazardous makeshift supports Provides 3/4" NPT standard pipe mount, adapter bushings available 3/4"- 1/2" and 3/4"- 1" Type 4X, IP UL and cul Listed for Class I, Division 2, Groups A, B, C and D, Class II, Groups E, F and G, Class III MODEL SSM SYNCHRONOUS STROBE MODULE IDEAL FOR USE WITH MODELS 151XST, 154XST, 224XST, 224XST-HI, 225XST, 225XST-I, 27XST, 24XST Synchronizes strobe lights to 72 flashes per minute 24VDC operating voltage Safe area installation only, but compatible with all hazardous and explosion proof strobe signals Mounts on double-gang electrical box UL1971 Approved for hearing impaired applications Polarized design allows for remote supervision Compatible with select Federal Signal strobe lights

RANGE CERTIFICATIONS AUDIBLE SIGNALS CERTIFICATIONS ABS IP RATING G-SND G-SPK G-SPA 450EWBX 31X / 41X SSTX-MV P-LS2B / P-LS2C 110 / ES1-8W & 15W 120 / ES4 / ES5-25W PRODUCTS 300GCX / 302GCX 304GCX / 314GCX AM300GCX / AM302GCX * * * 300X / 302X 304X / 314X * Product is Type 4X equivalent to IP FEDERAL SIGNAL HAS A 5-YEAR WARRANTY, THE LONGEST IN THE INDUSTRY. Warranty Seller warrants all goods for five years on parts and 2-1/2 years on labor, under the following condition and exceptions: Seller warrants that all goods of Seller s manufacture will conform to any descriptions thereof for specifications which are expressly made a part of this sales contract and at the time of sale by Seller such goods shall be commercially free from defects in material or workmanship. Seller reserves the right at the Seller s discretion to Repair and Return or Replace any item deemed defective during the warranty period. This warranty does not cover travel expenses, the cost of specialized equipment for gaining access to the product, or labor charges for removal and reinstallation of the product. This warranty shall be ineffective and shall not apply to goods that have been subjected to misuse, neglect, accident, damage, improper maintenance, or to goods altered or repaired by anyone other than Seller or its authorized representative, or if five years have elapsed from the date of shipment of the goods by Seller with the following exceptions: lamps and strobe tubes are not covered under this warranty. Outdoor warning sirens and controllers manufactured by Federal Warning Systems are warranteed for two years on parts and one year on labor.

Federal Signal s established sales network operates worldwide with an extensive network of authorized manufacturer s representatives and distributors to provide customers a seamless solution for all their safety and security needs. To locate a sales representative near you, visit www.fedsig.com/where-to-buy. Federal Signal Sales Representatives Sales Offices: United States 2645 Federal Signal Drive University Park, IL 60484 Tel: +1 708.534.4756 United Kingdom Silk House, 3rd Floor, Park Green Macclesfield, Cheshire SK11 7NA, UK Tel: +44 (0)1625 00 Dubai Internet City Building 2 Dubai, UAE Tel: +971 (0) 50 100 89 35 2016 Federal Signal Corporation. 250/1116